Dean Camera
13 years ago
parent
d887c0c73c
commit
000c4c6c5c
@ -1,513 +0,0 @@ |
||||
# Hey Emacs, this is a -*- makefile -*- |
||||
#---------------------------------------------------------------------------- |
||||
# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al. |
||||
# >> Modified for use with the LUFA project. << |
||||
# |
||||
# Released to the Public Domain |
||||
# |
||||
# Additional material for this makefile was written by: |
||||
# Peter Fleury |
||||
# Tim Henigan |
||||
# Colin O'Flynn |
||||
# Reiner Patommel |
||||
# Markus Pfaff |
||||
# Sander Pool |
||||
# Frederik Rouleau |
||||
# Carlos Lamas |
||||
# Dean Camera |
||||
# Opendous Inc. |
||||
# Denver Gingerich |
||||
# |
||||
#---------------------------------------------------------------------------- |
||||
# On command line: |
||||
# |
||||
# make all = Make software. |
||||
# |
||||
# make clean = Clean out built project files. |
||||
# |
||||
# make dfu = Download the hex file to the device, using dfu-programmer (must |
||||
# have dfu-programmer installed). |
||||
# |
||||
# make flip = Download the hex file to the device, using Atmel FLIP (must |
||||
# have Atmel FLIP installed). |
||||
# |
||||
# make doxygen = Generate DoxyGen documentation for the project (must have |
||||
# DoxyGen installed) |
||||
# |
||||
# make filename.s = Just compile filename.c into the assembler code only. |
||||
# |
||||
# make filename.i = Create a preprocessed source file for use in submitting |
||||
# bug reports to the GCC project. |
||||
# |
||||
# To rebuild project do "make clean" then "make all". |
||||
#---------------------------------------------------------------------------- |
||||
|
||||
|
||||
# MCU name |
||||
MCU = uc3a3256 |
||||
|
||||
|
||||
# Targeted chip architecture (see library "Architectures" documentation) |
||||
ARCH = UC3 |
||||
|
||||
|
||||
# Target board (see library "Board Types" documentation, NONE for projects not requiring |
||||
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called |
||||
# "Board" inside the application directory. |
||||
BOARD = NONE |
||||
|
||||
|
||||
# Processor frequency. |
||||
# This will define a symbol, F_CPU, in all source code files equal to the |
||||
# processor frequency in Hz. You can then use this symbol in your source code to |
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done |
||||
# automatically to create a 32-bit value in your source code. |
||||
# |
||||
# This should be the frequency the system core runs at, after the system clock |
||||
# has been set up correctly and started. |
||||
F_CPU = 12000000 |
||||
|
||||
|
||||
# USB controller master clock frequency. |
||||
# This will define a symbol, F_USB, in all source code files equal to the |
||||
# input clock frequency of the USB controller's clock generator in Hz. |
||||
# |
||||
# For the UC3 chips, this should be equal to 48MHz or 96MHz. |
||||
F_USB = 48000000 |
||||
|
||||
|
||||
# Output format. (can be srec, ihex, binary) |
||||
FORMAT = ihex |
||||
|
||||
|
||||
# Target file name (without extension). |
||||
TARGET = Test |
||||
|
||||
|
||||
# Object files directory |
||||
# To put object files in current directory, use a dot (.), do NOT make |
||||
# this an empty or blank macro! |
||||
OBJDIR = . |
||||
|
||||
|
||||
# Path to the LUFA library |
||||
LUFA_PATH = ../.. |
||||
|
||||
|
||||
# LUFA library compile-time options and predefined tokens (add '-D' before each token) |
||||
LUFA_OPTS = |
||||
|
||||
|
||||
# Create the LUFA source path variables by including the LUFA root makefile |
||||
include $(LUFA_PATH)/LUFA/makefile |
||||
|
||||
|
||||
# List C source files here. (C dependencies are automatically generated.) |
||||
SRC = Test_C.c \ |
||||
$(LUFA_SRC_USB) \ |
||||
$(LUFA_SRC_USBCLASS) |
||||
|
||||
|
||||
# List C++ source files here. (C dependencies are automatically generated.) |
||||
CPPSRC = Test_CPP.cpp |
||||
|
||||
|
||||
# List Assembler source files here. |
||||
# Make them always end in a capital .S. Files ending in a lowercase .s |
||||
# will not be considered source files but generated files (assembler |
||||
# output from the compiler), and will be deleted upon "make clean"! |
||||
# Even though the DOS/Win* filesystem matches both .s and .S the same, |
||||
# it will preserve the spelling of the filenames, and gcc itself does |
||||
# care about how the name is spelled on its command-line. |
||||
ASRC = Dummy.S \ |
||||
$(LUFA_PATH)/LUFA/Platform/UC3/Exception.S |
||||
|
||||
|
||||
# Optimization level, can be [0, 1, 2, 3, s]. |
||||
# 0 = turn off optimization. s = optimize for size. |
||||
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) |
||||
OPT = 1 |
||||
|
||||
|
||||
# List any extra directories to look for include files here. |
||||
# Each directory must be seperated by a space. |
||||
# Use forward slashes for directory separators. |
||||
# For a directory that has spaces, enclose it in quotes. |
||||
EXTRAINCDIRS = $(LUFA_PATH)/ |
||||
|
||||
|
||||
# Compiler flag to set the C Standard level. |
||||
# c89 = "ANSI" C |
||||
# gnu89 = c89 plus GCC extensions |
||||
# c99 = ISO C99 standard (not yet fully implemented) |
||||
# gnu99 = c99 plus GCC extensions |
||||
CSTANDARD = -std=gnu99 |
||||
|
||||
|
||||
# Place -D or -U options here for C sources |
||||
CDEFS = -DF_CPU=$(F_CPU)UL |
||||
CDEFS += -DF_USB=$(F_USB)UL |
||||
CDEFS += -DBOARD=BOARD_$(BOARD) |
||||
CDEFS += -DARCH=ARCH_$(ARCH) |
||||
CDEFS += $(LUFA_OPTS) |
||||
|
||||
|
||||
# Place -D or -U options here for ASM sources |
||||
ADEFS = -DF_CPU=$(F_CPU) |
||||
ADEFS += -DF_USB=$(F_USB)UL |
||||
ADEFS += -DBOARD=BOARD_$(BOARD) |
||||
ADEFS += -DARCH=ARCH_$(ARCH) |
||||
ADEFS += $(LUFA_OPTS) |
||||
|
||||
# Place -D or -U options here for C++ sources |
||||
CPPDEFS = -DF_CPU=$(F_CPU)UL |
||||
CPPDEFS += -DF_USB=$(F_USB)UL |
||||
CPPDEFS += -DBOARD=BOARD_$(BOARD) |
||||
CPPDEFS += -DARCH=ARCH_$(ARCH) |
||||
CPPDEFS += $(LUFA_OPTS) |
||||
|
||||
|
||||
# Debugging level. |
||||
DEBUG = 3 |
||||
|
||||
|
||||
#---------------- Compiler Options C ---------------- |
||||
# -g*: generate debugging information |
||||
# -O*: optimization level |
||||
# -f...: tuning, see GCC manual and avr-libc documentation |
||||
# -Wall...: warning level |
||||
# -Wa,...: tell GCC to pass this to the assembler. |
||||
# -adhlns...: create assembler listing |
||||
CFLAGS = -g$(DEBUG) |
||||
CFLAGS += $(CDEFS) |
||||
CFLAGS += -O$(OPT) |
||||
CFLAGS += -funsigned-char |
||||
CFLAGS += -funsigned-bitfields |
||||
CFLAGS += -ffunction-sections |
||||
CFLAGS += -fno-strict-aliasing |
||||
CFLAGS += -masm-addr-pseudos |
||||
#CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) |
||||
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) |
||||
CFLAGS += $(CSTANDARD) |
||||
CFLAGS += -Werror |
||||
CFLAGS += -Wall |
||||
CFLAGS += -Wextra |
||||
CFLAGS += -Wstrict-prototypes |
||||
CFLAGS += -Wformat=2 |
||||
CFLAGS += -Winit-self |
||||
CFLAGS += -Wswitch-enum |
||||
CFLAGS += -Wunused |
||||
CFLAGS += -Wundef |
||||
CFLAGS += -Wpointer-arith |
||||
CFLAGS += -Wcast-align |
||||
CFLAGS += -Wwrite-strings |
||||
CFLAGS += -Wlogical-op |
||||
CFLAGS += -Wmissing-parameter-type |
||||
CFLAGS += -Wmissing-declarations |
||||
CFLAGS += -Wmissing-field-initializers |
||||
CFLAGS += -Wmissing-format-attribute |
||||
#CFLAGS += -Wredundant-decls |
||||
CFLAGS += -Wnested-externs |
||||
CFLAGS += -Woverlength-strings |
||||
#CFLAGS += -Wswitch-default |
||||
#CFLAGS += -Wc++-compat |
||||
#CFLAGS += -Wcast-qual |
||||
#CFLAGS += -Wconversion |
||||
#CFLAGS += -Wjump-misses-init |
||||
#CFLAGS += -pedantic |
||||
|
||||
|
||||
#---------------- Compiler Options C++ ---------------- |
||||
# -g*: generate debugging information |
||||
# -O*: optimization level |
||||
# -f...: tuning, see GCC manual and avr-libc documentation |
||||
# -Wall...: warning level |
||||
# -Wa,...: tell GCC to pass this to the assembler. |
||||
# -adhlns...: create assembler listing |
||||
CPPFLAGS = -g$(DEBUG) |
||||
CPPFLAGS += $(CPPDEFS) |
||||
CPPFLAGS += -O$(OPT) |
||||
CPPFLAGS += -funsigned-char |
||||
CPPFLAGS += -funsigned-bitfields |
||||
CPPFLAGS += -ffunction-sections |
||||
CPPFLAGS += -fno-strict-aliasing |
||||
CPPFLAGS += -fno-exceptions |
||||
CPPFLAGS += -masm-addr-pseudos |
||||
CPPFLAGS += -Wall |
||||
CPPFLAGS += -Wundef |
||||
#CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) |
||||
CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) |
||||
#CPPFLAGS += $(CSTANDARD) |
||||
|
||||
|
||||
#---------------- Assembler Options ---------------- |
||||
# -Wa,...: tell GCC to pass this to the assembler. |
||||
# -adhlns: create listing |
||||
# -gstabs: have the assembler create line number information; note that |
||||
# for use in COFF files, additional information about filenames |
||||
# and function names needs to be present in the assembler source |
||||
# files -- see avr-libc docs [FIXME: not yet described there] |
||||
# -listing-cont-lines: Sets the maximum number of continuation lines of hex |
||||
# dump that will be displayed for a given single line of source input. |
||||
ASFLAGS = $(ADEFS) |
||||
#ASFLAGS += -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 |
||||
|
||||
|
||||
#---------------- Linker Options ---------------- |
||||
# -Wl,...: tell GCC to pass this to linker. |
||||
# -Map: create map file |
||||
# --cref: add cross reference to map file |
||||
#LDFLAGS = -Wl,-Map=$(TARGET).map,--cref |
||||
LDFLAGS += -Wl,--gc-sections --rodata-writable |
||||
LDFLAGS += -Wl,--direct-data |
||||
#LDFLAGS += -T linker_script.x |
||||
|
||||
|
||||
#============================================================================ |
||||
|
||||
|
||||
# Define programs and commands. |
||||
SHELL = sh |
||||
CC = avr32-gcc |
||||
OBJCOPY = avr32-objcopy |
||||
OBJDUMP = avr32-objdump |
||||
SIZE = avr32-size |
||||
AR = avr32-ar rcs |
||||
NM = avr32-nm |
||||
REMOVE = rm -f |
||||
REMOVEDIR = rm -rf |
||||
COPY = cp |
||||
WINSHELL = cmd |
||||
|
||||
|
||||
# Define Messages |
||||
# English |
||||
MSG_ERRORS_NONE = Errors: none |
||||
MSG_BEGIN = -------- begin -------- |
||||
MSG_END = -------- end -------- |
||||
MSG_SIZE_BEFORE = Size before: |
||||
MSG_SIZE_AFTER = Size after: |
||||
MSG_COFF = Converting to AVR COFF: |
||||
MSG_FLASH = Creating load file for Flash: |
||||
MSG_EEPROM = Creating load file for EEPROM: |
||||
MSG_EXTENDED_LISTING = Creating Extended Listing: |
||||
MSG_SYMBOL_TABLE = Creating Symbol Table: |
||||
MSG_LINKING = Linking: |
||||
MSG_COMPILING = Compiling C: |
||||
MSG_COMPILING_CPP = Compiling C++: |
||||
MSG_ASSEMBLING = Assembling: |
||||
MSG_CLEANING = Cleaning project: |
||||
MSG_CREATING_LIBRARY = Creating library: |
||||
|
||||
|
||||
|
||||
|
||||
# Define all object files. |
||||
OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) |
||||
|
||||
# Define all listing files. |
||||
LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) |
||||
|
||||
|
||||
# Compiler flags to generate dependency files. |
||||
#GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d |
||||
|
||||
|
||||
# Combine all necessary flags and optional flags. |
||||
# Add target processor to flags. |
||||
ALL_CFLAGS = -mpart=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS) |
||||
ALL_CPPFLAGS = -mpart=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS) |
||||
ALL_ASFLAGS = -mpart=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) |
||||
|
||||
|
||||
|
||||
|
||||
|
||||
# Default target. |
||||
all: begin gccversion sizebefore build sizeafter end |
||||
|
||||
# Change the build target to build a HEX file or a library. |
||||
build: elf hex lss sym |
||||
#build: lib |
||||
|
||||
|
||||
elf: $(TARGET).elf |
||||
hex: $(TARGET).hex |
||||
lss: $(TARGET).lss |
||||
sym: $(TARGET).sym |
||||
LIBNAME=lib$(TARGET).a |
||||
lib: $(LIBNAME) |
||||
|
||||
|
||||
|
||||
# Eye candy. |
||||
# AVR Studio 3.x does not check make's exit code but relies on |
||||
# the following magic strings to be generated by the compile job. |
||||
begin: |
||||
@echo |
||||
@echo $(MSG_BEGIN) |
||||
|
||||
end: |
||||
@echo $(MSG_END) |
||||
@echo |
||||
|
||||
|
||||
# Display size of file. |
||||
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex |
||||
ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf |
||||
MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) ) |
||||
FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr ) |
||||
|
||||
|
||||
sizebefore: |
||||
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \ |
||||
2>/dev/null; echo; fi |
||||
|
||||
sizeafter: |
||||
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ |
||||
2>/dev/null; echo; fi |
||||
|
||||
|
||||
|
||||
# Display compiler version information. |
||||
gccversion : |
||||
@$(CC) --version |
||||
|
||||
|
||||
# Program the device. |
||||
flip: $(TARGET).hex |
||||
batchisp -hardware usb -device $(MCU) -operation erase f |
||||
batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program |
||||
batchisp -hardware usb -device $(MCU) -operation start reset 0 |
||||
|
||||
dfu: $(TARGET).hex |
||||
dfu-programmer $(MCU) erase |
||||
dfu-programmer $(MCU) flash $(TARGET).hex |
||||
dfu-programmer $(MCU) reset |
||||
|
||||
|
||||
# Create final output files (.hex, .eep) from ELF output file. |
||||
%.hex: %.elf |
||||
@echo |
||||
@echo $(MSG_FLASH) $@ |
||||
$(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature $< $@ |
||||
|
||||
# Create extended listing file from ELF output file. |
||||
%.lss: %.elf |
||||
@echo |
||||
@echo $(MSG_EXTENDED_LISTING) $@ |
||||
$(OBJDUMP) -h -S -z $< > $@ |
||||
|
||||
# Create a symbol table from ELF output file. |
||||
%.sym: %.elf |
||||
@echo |
||||
@echo $(MSG_SYMBOL_TABLE) $@ |
||||
$(NM) -n $< > $@ |
||||
|
||||
|
||||
|
||||
# Create library from object files. |
||||
.SECONDARY : $(TARGET).a |
||||
.PRECIOUS : $(OBJ) |
||||
%.a: $(OBJ) |
||||
@echo |
||||
@echo $(MSG_CREATING_LIBRARY) $@ |
||||
$(AR) $@ $(OBJ) |
||||
|
||||
|
||||
# Link: create ELF output file from object files. |
||||
.SECONDARY : $(TARGET).elf |
||||
.PRECIOUS : $(OBJ) |
||||
%.elf: $(OBJ) |
||||
@echo |
||||
@echo $(MSG_LINKING) $@ |
||||
$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS) |
||||
|
||||
|
||||
# Compile: create object files from C source files. |
||||
$(OBJDIR)/%.o : %.c |
||||
@echo |
||||
@echo $(MSG_COMPILING) $< |
||||
$(CC) -c $(ALL_CFLAGS) $< -o $@ |
||||
|
||||
|
||||
# Compile: create object files from C++ source files. |
||||
$(OBJDIR)/%.o : %.cpp |
||||
@echo |
||||
@echo $(MSG_COMPILING_CPP) $< |
||||
$(CC) -c $(ALL_CPPFLAGS) $< -o $@ |
||||
|
||||
|
||||
# Compile: create assembler files from C source files. |
||||
%.s : %.c |
||||
$(CC) -S $(ALL_CFLAGS) $< -o $@ |
||||
|
||||
|
||||
# Compile: create assembler files from C++ source files. |
||||
%.s : %.cpp |
||||
$(CC) -S $(ALL_CPPFLAGS) $< -o $@ |
||||
|
||||
|
||||
# Assemble: create object files from assembler source files. |
||||
$(OBJDIR)/%.o : %.S |
||||
@echo |
||||
@echo $(MSG_ASSEMBLING) $< |
||||
$(CC) -c $(ALL_ASFLAGS) $< -o $@ |
||||
|
||||
|
||||
# Create preprocessed source for use in sending a bug report. |
||||
%.i : %.c |
||||
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ |
||||
|
||||
|
||||
# Target: clean project. |
||||
clean: begin clean_list end |
||||
|
||||
clean_list : |
||||
@echo |
||||
@echo $(MSG_CLEANING) |
||||
$(REMOVE) $(TARGET).hex |
||||
$(REMOVE) $(TARGET).cof |
||||
$(REMOVE) $(TARGET).elf |
||||
$(REMOVE) $(TARGET).map |
||||
$(REMOVE) $(TARGET).sym |
||||
$(REMOVE) $(TARGET).lss |
||||
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) |
||||
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) |
||||
$(REMOVE) $(SRC:.c=.s) |
||||
$(REMOVE) $(SRC:.c=.d) |
||||
$(REMOVE) $(SRC:.c=.i) |
||||
$(REMOVEDIR) .dep |
||||
|
||||
doxygen: |
||||
@echo Generating Project Documentation \($(TARGET)\)... |
||||
@if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ |
||||
exit 1; \ |
||||
fi; |
||||
@echo Documentation Generation Complete. |
||||
|
||||
clean_doxygen: |
||||
rm -rf Documentation |
||||
|
||||
checksource: |
||||
@for f in $(SRC) $(CPPSRC) $(ASRC); do \ |
||||
if [ -f $$f ]; then \ |
||||
echo "Found Source File: $$f" ; \ |
||||
else \ |
||||
echo "Source File Not Found: $$f" ; \ |
||||
fi; done |
||||
|
||||
|
||||
# Create object files directory |
||||
$(shell mkdir $(OBJDIR) 2>/dev/null) |
||||
|
||||
|
||||
# Include the dependency files. |
||||
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*) |
||||
|
||||
|
||||
# Listing of phony targets. |
||||
.PHONY : all begin finish end sizebefore sizeafter gccversion \ |
||||
build elf hex lss sym doxygen clean clean_list clean_doxygen \ |
||||
dfu flip checksource |
||||
|
||||
Loading…
Reference in new issue