hailey
/
qmk_firmware
mirror of https://github.com/hailey/qmk_firmware.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Port the device mode demos to the XMEGA architecture where applicable.

Browse Source
Dean Camera 12 years ago
parent 329629a316
commit 151a1c5888
57 changed files with 670 additions and 54 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 2
      Demos/Device/LowLevel/AudioInput/AudioInput.c
  2. 1
      Demos/Device/LowLevel/AudioInput/AudioInput.h
  3. 8
      Demos/Device/LowLevel/AudioInput/asf.xml
  4. 2
      Demos/Device/LowLevel/AudioOutput/AudioOutput.c
  5. 1
      Demos/Device/LowLevel/AudioOutput/AudioOutput.h
  6. 8
      Demos/Device/LowLevel/AudioOutput/asf.xml
  7. 33
      Demos/Device/LowLevel/DualVirtualSerial/Config/LUFAConfig.h
  8. 2
      Demos/Device/LowLevel/DualVirtualSerial/Descriptors.h
  9. 12
      Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.c
  10. 1
      Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.h
  11. 3
      Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.txt
  12. 20
      Demos/Device/LowLevel/DualVirtualSerial/asf.xml
  13. 33
      Demos/Device/LowLevel/GenericHID/Config/LUFAConfig.h
  14. 12
      Demos/Device/LowLevel/GenericHID/GenericHID.c
  15. 1
      Demos/Device/LowLevel/GenericHID/GenericHID.h
  16. 3
      Demos/Device/LowLevel/GenericHID/GenericHID.txt
  17. 20
      Demos/Device/LowLevel/GenericHID/asf.xml
  18. 33
      Demos/Device/LowLevel/Joystick/Config/LUFAConfig.h
  19. 12
      Demos/Device/LowLevel/Joystick/Joystick.c
  20. 1
      Demos/Device/LowLevel/Joystick/Joystick.h
  21. 3
      Demos/Device/LowLevel/Joystick/Joystick.txt
  22. 20
      Demos/Device/LowLevel/Joystick/asf.xml
  23. 33
      Demos/Device/LowLevel/Keyboard/Config/LUFAConfig.h
  24. 12
      Demos/Device/LowLevel/Keyboard/Keyboard.c
  25. 1
      Demos/Device/LowLevel/Keyboard/Keyboard.h
  26. 3
      Demos/Device/LowLevel/Keyboard/Keyboard.txt
  27. 20
      Demos/Device/LowLevel/Keyboard/asf.xml
  28. 33
      Demos/Device/LowLevel/KeyboardMouse/Config/LUFAConfig.h
  29. 12
      Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.c
  30. 1
      Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.h
  31. 3
      Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.txt
  32. 20
      Demos/Device/LowLevel/KeyboardMouse/asf.xml
  33. 33
      Demos/Device/LowLevel/MIDI/Config/LUFAConfig.h
  34. 12
      Demos/Device/LowLevel/MIDI/MIDI.c
  35. 1
      Demos/Device/LowLevel/MIDI/MIDI.h
  36. 3
      Demos/Device/LowLevel/MIDI/MIDI.txt
  37. 20
      Demos/Device/LowLevel/MIDI/asf.xml
  38. 33
      Demos/Device/LowLevel/MassStorage/Config/LUFAConfig.h
  39. 12
      Demos/Device/LowLevel/MassStorage/MassStorage.c
  40. 1
      Demos/Device/LowLevel/MassStorage/MassStorage.h
  41. 3
      Demos/Device/LowLevel/MassStorage/MassStorage.txt
  42. 20
      Demos/Device/LowLevel/MassStorage/asf.xml
  43. 33
      Demos/Device/LowLevel/Mouse/Config/LUFAConfig.h
  44. 12
      Demos/Device/LowLevel/Mouse/Mouse.c
  45. 1
      Demos/Device/LowLevel/Mouse/Mouse.h
  46. 3
      Demos/Device/LowLevel/Mouse/Mouse.txt
  47. 20
      Demos/Device/LowLevel/Mouse/asf.xml
  48. 33
      Demos/Device/LowLevel/RNDISEthernet/Config/LUFAConfig.h
  49. 12
      Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.c
  50. 1
      Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.h
  51. 3
      Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.txt
  52. 20
      Demos/Device/LowLevel/RNDISEthernet/asf.xml
  53. 33
      Demos/Device/LowLevel/VirtualSerial/Config/LUFAConfig.h
  54. 12
      Demos/Device/LowLevel/VirtualSerial/VirtualSerial.c
  55. 1
      Demos/Device/LowLevel/VirtualSerial/VirtualSerial.h
  56. 3
      Demos/Device/LowLevel/VirtualSerial/VirtualSerial.txt
  57. 20
      Demos/Device/LowLevel/VirtualSerial/asf.xml

2
Demos/Device/LowLevel/AudioInput/AudioInput.c
Unescape View File

@ -62,12 +62,14 @@ int main(void)
/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
#if (ARCH == ARCH_AVR8)
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
#endif
/* Hardware Initialization */
LEDs_Init();

1
Demos/Device/LowLevel/AudioInput/AudioInput.h
Unescape View File

@ -49,6 +49,7 @@
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Board/Buttons.h>
#include <LUFA/Drivers/Peripheral/ADC.h>
#include <LUFA/Platform/Platform.h>
/* Macros: */
/** Maximum audio sample value for the microphone input. */

8
Demos/Device/LowLevel/AudioInput/asf.xml
Unescape View File

@ -1,14 +1,14 @@
<asf xmlversion="1.0">
<project caption="Audio Input Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.audio_input.example">
<project caption="Audio Input Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.audio_input.example.avr8">
<require idref="lufa.demos.device.lowlevel.audio_input"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="at90usb1287"/>
<config name="lufa.drivers.board.name" value="usbkey"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="8000000UL"/>
<build type="define" name="F_USB" value="8000000UL"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
</project>
<module type="application" id="lufa.demos.device.lowlevel.audio_input" caption="Audio Input Device Demo (Low Level APIs)">

2
Demos/Device/LowLevel/AudioOutput/AudioOutput.c
Unescape View File

@ -62,12 +62,14 @@ int main(void)
/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
#if (ARCH == ARCH_AVR8)
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
#endif
/* Hardware Initialization */
LEDs_Init();

1
Demos/Device/LowLevel/AudioOutput/AudioOutput.h
Unescape View File

@ -47,6 +47,7 @@
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Platform/Platform.h>
/* Macros: */
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */

8
Demos/Device/LowLevel/AudioOutput/asf.xml
Unescape View File

@ -1,14 +1,14 @@
<asf xmlversion="1.0">
<project caption="Audio Output Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.audio_output.example">
<project caption="Audio Output Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.audio_output.example.avr8">
<require idref="lufa.demos.device.lowlevel.audio_output"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="at90usb1287"/>
<config name="lufa.drivers.board.name" value="usbkey"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="8000000UL"/>
<build type="define" name="F_USB" value="8000000UL"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
</project>
<module type="application" id="lufa.demos.device.lowlevel.audio_output" caption="Audio Output Device Demo (Low Level APIs)">

33
Demos/Device/LowLevel/DualVirtualSerial/Config/LUFAConfig.h
Unescape View File

@ -85,6 +85,39 @@
// #define NO_AUTO_VBUS_MANAGEMENT
// #define INVERTED_VBUS_ENABLE_LINE
#elif (ARCH == ARCH_XMEGA)
/* Non-USB Related Configuration Tokens: */
// #define DISABLE_TERMINAL_CODES
/* USB Class Driver Related Tokens: */
// #define HID_HOST_BOOT_PROTOCOL_ONLY
// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
// #define HID_MAX_COLLECTIONS {Insert Value Here}
// #define HID_MAX_REPORTITEMS {Insert Value Here}
// #define HID_MAX_REPORT_IDS {Insert Value Here}
// #define NO_CLASS_DRIVER_AUTOFLUSH
/* General USB Driver Related Tokens: */
#define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
// #define NO_LIMITED_CONTROLLER_CONNECT
// #define NO_SOF_EVENTS
/* USB Device Mode Driver Related Tokens: */
// #define USE_RAM_DESCRIPTORS
#define USE_FLASH_DESCRIPTORS
// #define USE_EEPROM_DESCRIPTORS
// #define NO_INTERNAL_SERIAL
#define FIXED_CONTROL_ENDPOINT_SIZE 8
// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
#define FIXED_NUM_CONFIGURATIONS 1
// #define CONTROL_ONLY_DEVICE
#define MAX_ENDPOINT_INDEX 6
// #define NO_DEVICE_REMOTE_WAKEUP
// #define NO_DEVICE_SELF_POWER
#else
#error Unsupported architecture for this LUFA configuration file.

2
Demos/Device/LowLevel/DualVirtualSerial/Descriptors.h
Unescape View File

@ -58,7 +58,7 @@
#define CDC2_RX_EPADDR (ENDPOINT_DIR_OUT | 5)
/** Endpoint address of the second CDC interface's device-to-host notification IN endpoint. */
#define CDC2_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 6)
#define CDC2_NOTIFICATION_EPADDR (ENDPOINT_DIR_IN | 6)
/** Size in bytes of the CDC device-to-host notification IN endpoints. */
#define CDC_NOTIFICATION_EPSIZE 8

12
Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.c
Unescape View File

@ -84,12 +84,24 @@ int main(void)
/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
#if (ARCH == ARCH_AVR8)
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
#elif (ARCH == ARCH_XMEGA)
/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
#endif
/* Hardware Initialization */
Joystick_Init();

1
Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.h
Unescape View File

@ -48,6 +48,7 @@
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Board/Joystick.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Platform/Platform.h>
/* Macros: */
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */

3
Demos/Device/LowLevel/DualVirtualSerial/DualVirtualSerial.txt
Unescape View File

@ -13,6 +13,9 @@
* \li Series 7 USB AVRs (AT90USBxxx7)
* \li Series 6 USB AVRs (AT90USBxxx6)
* \li Series 4 USB AVRs (ATMEGAxxU4)
* \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
* \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
* \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
*
* \section Sec_Info USB Information:
*

20
Demos/Device/LowLevel/DualVirtualSerial/asf.xml
Unescape View File

@ -1,14 +1,26 @@
<asf xmlversion="1.0">
<project caption="Dual Virtual Serial Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.dual_cdc.example">
<project caption="Dual Virtual Serial Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.dual_cdc.example.avr8">
<require idref="lufa.demos.device.lowlevel.dual_cdc"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="at90usb1287"/>
<config name="lufa.drivers.board.name" value="usbkey"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="8000000UL"/>
<build type="define" name="F_USB" value="8000000UL"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
</project>
<project caption="Dual Virtual Serial Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.dual_cdc.example.xmega">
<require idref="lufa.demos.device.lowlevel.dual_cdc"/>
<require idref="lufa.boards.dummy.xmega"/>
<generator value="as5_8"/>
<device-support value="atxmega128a1u"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="32000000UL"/>
<build type="define" name="F_USB" value="48000000UL"/>
</project>
<module type="application" id="lufa.demos.device.lowlevel.dual_cdc" caption="Dual Virtual Serial Device Demo (Low Level APIs)">

33
Demos/Device/LowLevel/GenericHID/Config/LUFAConfig.h
Unescape View File

@ -85,6 +85,39 @@
// #define NO_AUTO_VBUS_MANAGEMENT
// #define INVERTED_VBUS_ENABLE_LINE
#elif (ARCH == ARCH_XMEGA)
/* Non-USB Related Configuration Tokens: */
// #define DISABLE_TERMINAL_CODES
/* USB Class Driver Related Tokens: */
// #define HID_HOST_BOOT_PROTOCOL_ONLY
// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
// #define HID_MAX_COLLECTIONS {Insert Value Here}
// #define HID_MAX_REPORTITEMS {Insert Value Here}
// #define HID_MAX_REPORT_IDS {Insert Value Here}
// #define NO_CLASS_DRIVER_AUTOFLUSH
/* General USB Driver Related Tokens: */
#define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
// #define NO_LIMITED_CONTROLLER_CONNECT
// #define NO_SOF_EVENTS
/* USB Device Mode Driver Related Tokens: */
// #define USE_RAM_DESCRIPTORS
#define USE_FLASH_DESCRIPTORS
// #define USE_EEPROM_DESCRIPTORS
// #define NO_INTERNAL_SERIAL
#define FIXED_CONTROL_ENDPOINT_SIZE 8
// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
#define FIXED_NUM_CONFIGURATIONS 1
// #define CONTROL_ONLY_DEVICE
#define MAX_ENDPOINT_INDEX 2
// #define NO_DEVICE_REMOTE_WAKEUP
// #define NO_DEVICE_SELF_POWER
#else
#error Unsupported architecture for this LUFA configuration file.

12
Demos/Device/LowLevel/GenericHID/GenericHID.c
Unescape View File

@ -57,12 +57,24 @@ int main(void)
/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
#if (ARCH == ARCH_AVR8)
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
#elif (ARCH == ARCH_XMEGA)
/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
#endif
/* Hardware Initialization */
LEDs_Init();

1
Demos/Device/LowLevel/GenericHID/GenericHID.h
Unescape View File

@ -49,6 +49,7 @@
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Platform/Platform.h>
/* Macros: */
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */

3
Demos/Device/LowLevel/GenericHID/GenericHID.txt
Unescape View File

@ -14,6 +14,9 @@
* \li Series 6 USB AVRs (AT90USBxxx6)
* \li Series 4 USB AVRs (ATMEGAxxU4)
* \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
* \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
* \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
* \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
*
* \section Sec_Info USB Information:
*

20
Demos/Device/LowLevel/GenericHID/asf.xml
Unescape View File

@ -1,14 +1,26 @@
<asf xmlversion="1.0">
<project caption="Generic HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.generic_hid.example">
<project caption="Generic HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.generic_hid.example.avr8">
<require idref="lufa.demos.device.lowlevel.generic_hid"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="at90usb1287"/>
<config name="lufa.drivers.board.name" value="usbkey"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="8000000UL"/>
<build type="define" name="F_USB" value="8000000UL"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
</project>
<project caption="Generic HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.generic_hid.example.xmega">
<require idref="lufa.demos.device.lowlevel.generic_hid"/>
<require idref="lufa.boards.dummy.xmega"/>
<generator value="as5_8"/>
<device-support value="atxmega128a1u"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="32000000UL"/>
<build type="define" name="F_USB" value="48000000UL"/>
</project>
<module type="application" id="lufa.demos.device.lowlevel.generic_hid" caption="Generic HID Device Demo (Low Level APIs)">

33
Demos/Device/LowLevel/Joystick/Config/LUFAConfig.h
Unescape View File

@ -85,6 +85,39 @@
// #define NO_AUTO_VBUS_MANAGEMENT
// #define INVERTED_VBUS_ENABLE_LINE
#elif (ARCH == ARCH_XMEGA)
/* Non-USB Related Configuration Tokens: */
// #define DISABLE_TERMINAL_CODES
/* USB Class Driver Related Tokens: */
// #define HID_HOST_BOOT_PROTOCOL_ONLY
// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
// #define HID_MAX_COLLECTIONS {Insert Value Here}
// #define HID_MAX_REPORTITEMS {Insert Value Here}
// #define HID_MAX_REPORT_IDS {Insert Value Here}
// #define NO_CLASS_DRIVER_AUTOFLUSH
/* General USB Driver Related Tokens: */
#define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
// #define NO_LIMITED_CONTROLLER_CONNECT
// #define NO_SOF_EVENTS
/* USB Device Mode Driver Related Tokens: */
// #define USE_RAM_DESCRIPTORS
#define USE_FLASH_DESCRIPTORS
// #define USE_EEPROM_DESCRIPTORS
// #define NO_INTERNAL_SERIAL
#define FIXED_CONTROL_ENDPOINT_SIZE 8
// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
#define FIXED_NUM_CONFIGURATIONS 1
// #define CONTROL_ONLY_DEVICE
#define MAX_ENDPOINT_INDEX 1
// #define NO_DEVICE_REMOTE_WAKEUP
// #define NO_DEVICE_SELF_POWER
#else
#error Unsupported architecture for this LUFA configuration file.

12
Demos/Device/LowLevel/Joystick/Joystick.c
Unescape View File

@ -56,12 +56,24 @@ int main(void)
/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
#if (ARCH == ARCH_AVR8)
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
#elif (ARCH == ARCH_XMEGA)
/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
#endif
/* Hardware Initialization */
Joystick_Init();

1
Demos/Device/LowLevel/Joystick/Joystick.h
Unescape View File

@ -49,6 +49,7 @@
#include <LUFA/Drivers/Board/Joystick.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Board/Buttons.h>
#include <LUFA/Platform/Platform.h>
/* Macros: */
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */

3
Demos/Device/LowLevel/Joystick/Joystick.txt
Unescape View File

@ -14,6 +14,9 @@
* \li Series 6 USB AVRs (AT90USBxxx6)
* \li Series 4 USB AVRs (ATMEGAxxU4)
* \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
* \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
* \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
* \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
*
* \section Sec_Info USB Information:
*

20
Demos/Device/LowLevel/Joystick/asf.xml
Unescape View File

@ -1,14 +1,26 @@
<asf xmlversion="1.0">
<project caption="Joystick HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.joystick.example">
<project caption="Joystick HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.joystick.example.avr8">
<require idref="lufa.demos.device.lowlevel.joystick"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="at90usb1287"/>
<config name="lufa.drivers.board.name" value="usbkey"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="8000000UL"/>
<build type="define" name="F_USB" value="8000000UL"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
</project>
<project caption="Joystick HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.joystick.example.xmega">
<require idref="lufa.demos.device.lowlevel.joystick"/>
<require idref="lufa.boards.dummy.xmega"/>
<generator value="as5_8"/>
<device-support value="atxmega128a1u"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="32000000UL"/>
<build type="define" name="F_USB" value="48000000UL"/>
</project>
<module type="application" id="lufa.demos.device.lowlevel.joystick" caption="Joystick HID Device Demo (Low Level APIs)">

33
Demos/Device/LowLevel/Keyboard/Config/LUFAConfig.h
Unescape View File

@ -85,6 +85,39 @@
// #define NO_AUTO_VBUS_MANAGEMENT
// #define INVERTED_VBUS_ENABLE_LINE
#elif (ARCH == ARCH_XMEGA)
/* Non-USB Related Configuration Tokens: */
// #define DISABLE_TERMINAL_CODES
/* USB Class Driver Related Tokens: */
// #define HID_HOST_BOOT_PROTOCOL_ONLY
// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
// #define HID_MAX_COLLECTIONS {Insert Value Here}
// #define HID_MAX_REPORTITEMS {Insert Value Here}
// #define HID_MAX_REPORT_IDS {Insert Value Here}
// #define NO_CLASS_DRIVER_AUTOFLUSH
/* General USB Driver Related Tokens: */
#define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
// #define NO_LIMITED_CONTROLLER_CONNECT
// #define NO_SOF_EVENTS
/* USB Device Mode Driver Related Tokens: */
// #define USE_RAM_DESCRIPTORS
#define USE_FLASH_DESCRIPTORS
// #define USE_EEPROM_DESCRIPTORS
// #define NO_INTERNAL_SERIAL
#define FIXED_CONTROL_ENDPOINT_SIZE 8
// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
#define FIXED_NUM_CONFIGURATIONS 1
// #define CONTROL_ONLY_DEVICE
#define MAX_ENDPOINT_INDEX 2
// #define NO_DEVICE_REMOTE_WAKEUP
// #define NO_DEVICE_SELF_POWER
#else
#error Unsupported architecture for this LUFA configuration file.

12
Demos/Device/LowLevel/Keyboard/Keyboard.c
Unescape View File

@ -74,12 +74,24 @@ int main(void)
/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
#if (ARCH == ARCH_AVR8)
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
#elif (ARCH == ARCH_XMEGA)
/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
#endif
/* Hardware Initialization */
Joystick_Init();

1
Demos/Device/LowLevel/Keyboard/Keyboard.h
Unescape View File

@ -51,6 +51,7 @@
#include <LUFA/Drivers/Board/Joystick.h>
#include <LUFA/Drivers/Board/Buttons.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Platform/Platform.h>
/* Macros: */
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */

3
Demos/Device/LowLevel/Keyboard/Keyboard.txt
Unescape View File

@ -14,6 +14,9 @@
* \li Series 6 USB AVRs (AT90USBxxx6)
* \li Series 4 USB AVRs (ATMEGAxxU4)
* \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
* \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
* \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
* \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
*
* \section Sec_Info USB Information:
*

20
Demos/Device/LowLevel/Keyboard/asf.xml
Unescape View File

@ -1,14 +1,26 @@
<asf xmlversion="1.0">
<project caption="Keyboard HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.keyboard.example">
<project caption="Keyboard HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.keyboard.example.avr8">
<require idref="lufa.demos.device.lowlevel.keyboard"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="at90usb1287"/>
<config name="lufa.drivers.board.name" value="usbkey"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="8000000UL"/>
<build type="define" name="F_USB" value="8000000UL"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
</project>
<project caption="Keyboard HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.keyboard.example.xmega">
<require idref="lufa.demos.device.lowlevel.keyboard"/>
<require idref="lufa.boards.dummy.xmega"/>
<generator value="as5_8"/>
<device-support value="atxmega128a1u"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="32000000UL"/>
<build type="define" name="F_USB" value="48000000UL"/>
</project>
<module type="application" id="lufa.demos.device.lowlevel.keyboard" caption="Keyboard HID Device Demo (Low Level APIs)">

33
Demos/Device/LowLevel/KeyboardMouse/Config/LUFAConfig.h
Unescape View File

@ -85,6 +85,39 @@
// #define NO_AUTO_VBUS_MANAGEMENT
// #define INVERTED_VBUS_ENABLE_LINE
#elif (ARCH == ARCH_XMEGA)
/* Non-USB Related Configuration Tokens: */
// #define DISABLE_TERMINAL_CODES
/* USB Class Driver Related Tokens: */
// #define HID_HOST_BOOT_PROTOCOL_ONLY
// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
// #define HID_MAX_COLLECTIONS {Insert Value Here}
// #define HID_MAX_REPORTITEMS {Insert Value Here}
// #define HID_MAX_REPORT_IDS {Insert Value Here}
// #define NO_CLASS_DRIVER_AUTOFLUSH
/* General USB Driver Related Tokens: */
#define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
// #define NO_LIMITED_CONTROLLER_CONNECT
// #define NO_SOF_EVENTS
/* USB Device Mode Driver Related Tokens: */
// #define USE_RAM_DESCRIPTORS
#define USE_FLASH_DESCRIPTORS
// #define USE_EEPROM_DESCRIPTORS
// #define NO_INTERNAL_SERIAL
#define FIXED_CONTROL_ENDPOINT_SIZE 8
// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
#define FIXED_NUM_CONFIGURATIONS 1
// #define CONTROL_ONLY_DEVICE
#define MAX_ENDPOINT_INDEX 3
// #define NO_DEVICE_REMOTE_WAKEUP
// #define NO_DEVICE_SELF_POWER
#else
#error Unsupported architecture for this LUFA configuration file.

12
Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.c
Unescape View File

@ -65,12 +65,24 @@ int main(void)
/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
#if (ARCH == ARCH_AVR8)
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
#elif (ARCH == ARCH_XMEGA)
/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
#endif
/* Hardware Initialization */
Joystick_Init();

1
Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.h
Unescape View File

@ -46,6 +46,7 @@
#include <LUFA/Drivers/Board/Joystick.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Board/Buttons.h>
#include <LUFA/Platform/Platform.h>
/* Macros: */
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */

3
Demos/Device/LowLevel/KeyboardMouse/KeyboardMouse.txt
Unescape View File

@ -14,6 +14,9 @@
* \li Series 6 USB AVRs (AT90USBxxx6)
* \li Series 4 USB AVRs (ATMEGAxxU4)
* \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
* \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
* \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
* \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
*
* \section Sec_Info USB Information:
*

20
Demos/Device/LowLevel/KeyboardMouse/asf.xml
Unescape View File

@ -1,14 +1,26 @@
<asf xmlversion="1.0">
<project caption="Keyboard and Mouse HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.keyboard_mouse.example">
<project caption="Keyboard and Mouse HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.keyboard_mouse.example.avr8">
<require idref="lufa.demos.device.lowlevel.keyboard_mouse"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="at90usb1287"/>
<config name="lufa.drivers.board.name" value="usbkey"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="8000000UL"/>
<build type="define" name="F_USB" value="8000000UL"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
</project>
<project caption="Keyboard and Mouse HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.keyboard_mouse.example.xmega">
<require idref="lufa.demos.device.lowlevel.keyboard_mouse"/>
<require idref="lufa.boards.dummy.xmega"/>
<generator value="as5_8"/>
<device-support value="atxmega128a1u"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="32000000UL"/>
<build type="define" name="F_USB" value="48000000UL"/>
</project>
<module type="application" id="lufa.demos.device.lowlevel.keyboard_mouse" caption="Keyboard and Mouse HID Device Demo (Low Level APIs)">

33
Demos/Device/LowLevel/MIDI/Config/LUFAConfig.h
Unescape View File

@ -85,6 +85,39 @@
// #define NO_AUTO_VBUS_MANAGEMENT
// #define INVERTED_VBUS_ENABLE_LINE
#elif (ARCH == ARCH_XMEGA)
/* Non-USB Related Configuration Tokens: */
// #define DISABLE_TERMINAL_CODES
/* USB Class Driver Related Tokens: */
// #define HID_HOST_BOOT_PROTOCOL_ONLY
// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
// #define HID_MAX_COLLECTIONS {Insert Value Here}
// #define HID_MAX_REPORTITEMS {Insert Value Here}
// #define HID_MAX_REPORT_IDS {Insert Value Here}
// #define NO_CLASS_DRIVER_AUTOFLUSH
/* General USB Driver Related Tokens: */
#define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
// #define NO_LIMITED_CONTROLLER_CONNECT
// #define NO_SOF_EVENTS
/* USB Device Mode Driver Related Tokens: */
// #define USE_RAM_DESCRIPTORS
#define USE_FLASH_DESCRIPTORS
// #define USE_EEPROM_DESCRIPTORS
// #define NO_INTERNAL_SERIAL
#define FIXED_CONTROL_ENDPOINT_SIZE 8
// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
#define FIXED_NUM_CONFIGURATIONS 1
// #define CONTROL_ONLY_DEVICE
#define MAX_ENDPOINT_INDEX 2
// #define NO_DEVICE_REMOTE_WAKEUP
// #define NO_DEVICE_SELF_POWER
#else
#error Unsupported architecture for this LUFA configuration file.

12
Demos/Device/LowLevel/MIDI/MIDI.c
Unescape View File

@ -56,12 +56,24 @@ int main(void)
/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
#if (ARCH == ARCH_AVR8)
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
#elif (ARCH == ARCH_XMEGA)
/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
#endif
/* Hardware Initialization */
Joystick_Init();

1
Demos/Device/LowLevel/MIDI/MIDI.h
Unescape View File

@ -49,6 +49,7 @@
#include <LUFA/Drivers/Board/Joystick.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Board/Buttons.h>
#include <LUFA/Platform/Platform.h>
/* Macros: */
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */

3
Demos/Device/LowLevel/MIDI/MIDI.txt
Unescape View File

@ -14,6 +14,9 @@
* \li Series 6 USB AVRs (AT90USBxxx6)
* \li Series 4 USB AVRs (ATMEGAxxU4)
* \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
* \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
* \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
* \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
*
* \section Sec_Info USB Information:
*

20
Demos/Device/LowLevel/MIDI/asf.xml
Unescape View File

@ -1,14 +1,26 @@
<asf xmlversion="1.0">
<project caption="MIDI Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.midi.example">
<project caption="MIDI Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.midi.example.avr8">
<require idref="lufa.demos.device.lowlevel.midi"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="at90usb1287"/>
<config name="lufa.drivers.board.name" value="usbkey"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="8000000UL"/>
<build type="define" name="F_USB" value="8000000UL"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
</project>
<project caption="MIDI Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.midi.example.xmega">
<require idref="lufa.demos.device.lowlevel.midi"/>
<require idref="lufa.boards.dummy.xmega"/>
<generator value="as5_8"/>
<device-support value="atxmega128a1u"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="32000000UL"/>
<build type="define" name="F_USB" value="48000000UL"/>
</project>
<module type="application" id="lufa.demos.device.lowlevel.midi" caption="MIDI Device Demo (Low Level APIs)">

33
Demos/Device/LowLevel/MassStorage/Config/LUFAConfig.h
Unescape View File

@ -85,6 +85,39 @@
// #define NO_AUTO_VBUS_MANAGEMENT
// #define INVERTED_VBUS_ENABLE_LINE
#elif (ARCH == ARCH_XMEGA)
/* Non-USB Related Configuration Tokens: */
// #define DISABLE_TERMINAL_CODES
/* USB Class Driver Related Tokens: */
// #define HID_HOST_BOOT_PROTOCOL_ONLY
// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
// #define HID_MAX_COLLECTIONS {Insert Value Here}
// #define HID_MAX_REPORTITEMS {Insert Value Here}
// #define HID_MAX_REPORT_IDS {Insert Value Here}
// #define NO_CLASS_DRIVER_AUTOFLUSH
/* General USB Driver Related Tokens: */
#define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
// #define NO_LIMITED_CONTROLLER_CONNECT
// #define NO_SOF_EVENTS
/* USB Device Mode Driver Related Tokens: */
// #define USE_RAM_DESCRIPTORS
#define USE_FLASH_DESCRIPTORS
// #define USE_EEPROM_DESCRIPTORS
// #define NO_INTERNAL_SERIAL
#define FIXED_CONTROL_ENDPOINT_SIZE 8
// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
#define FIXED_NUM_CONFIGURATIONS 1
// #define CONTROL_ONLY_DEVICE
#define MAX_ENDPOINT_INDEX 4
// #define NO_DEVICE_REMOTE_WAKEUP
// #define NO_DEVICE_SELF_POWER
#else
#error Unsupported architecture for this LUFA configuration file.

12
Demos/Device/LowLevel/MassStorage/MassStorage.c
Unescape View File

@ -67,12 +67,24 @@ int main(void)
/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
#if (ARCH == ARCH_AVR8)
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
#elif (ARCH == ARCH_XMEGA)
/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
#endif
/* Hardware Initialization */
LEDs_Init();

1
Demos/Device/LowLevel/MassStorage/MassStorage.h
Unescape View File

@ -51,6 +51,7 @@
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Board/Dataflash.h>
#include <LUFA/Platform/Platform.h>
/* Macros: */
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */

3
Demos/Device/LowLevel/MassStorage/MassStorage.txt
Unescape View File

@ -14,6 +14,9 @@
* \li Series 6 USB AVRs (AT90USBxxx6)
* \li Series 4 USB AVRs (ATMEGAxxU4)
* \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
* \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
* \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
* \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
*
* \section Sec_Info USB Information:
*

20
Demos/Device/LowLevel/MassStorage/asf.xml
Unescape View File

@ -1,14 +1,26 @@
<asf xmlversion="1.0">
<project caption="Mass Storage Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.mass_storage.example">
<project caption="Mass Storage Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.mass_storage.example.avr8">
<require idref="lufa.demos.device.lowlevel.mass_storage"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="at90usb1287"/>
<config name="lufa.drivers.board.name" value="usbkey"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="8000000UL"/>
<build type="define" name="F_USB" value="8000000UL"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
</project>
<project caption="Mass Storage Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.mass_storage.example.xmega">
<require idref="lufa.demos.device.lowlevel.mass_storage"/>
<require idref="lufa.boards.dummy.xmega"/>
<generator value="as5_8"/>
<device-support value="atxmega128a1u"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="32000000UL"/>
<build type="define" name="F_USB" value="48000000UL"/>
</project>
<module type="application" id="lufa.demos.device.lowlevel.mass_storage" caption="Mass Storage Device Demo (Low Level APIs)">

33
Demos/Device/LowLevel/Mouse/Config/LUFAConfig.h
Unescape View File

@ -85,6 +85,39 @@
// #define NO_AUTO_VBUS_MANAGEMENT
// #define INVERTED_VBUS_ENABLE_LINE
#elif (ARCH == ARCH_XMEGA)
/* Non-USB Related Configuration Tokens: */
// #define DISABLE_TERMINAL_CODES
/* USB Class Driver Related Tokens: */
// #define HID_HOST_BOOT_PROTOCOL_ONLY
// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
// #define HID_MAX_COLLECTIONS {Insert Value Here}
// #define HID_MAX_REPORTITEMS {Insert Value Here}
// #define HID_MAX_REPORT_IDS {Insert Value Here}
// #define NO_CLASS_DRIVER_AUTOFLUSH
/* General USB Driver Related Tokens: */
#define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
// #define NO_LIMITED_CONTROLLER_CONNECT
// #define NO_SOF_EVENTS
/* USB Device Mode Driver Related Tokens: */
// #define USE_RAM_DESCRIPTORS
#define USE_FLASH_DESCRIPTORS
// #define USE_EEPROM_DESCRIPTORS
// #define NO_INTERNAL_SERIAL
#define FIXED_CONTROL_ENDPOINT_SIZE 8
// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
#define FIXED_NUM_CONFIGURATIONS 1
// #define CONTROL_ONLY_DEVICE
#define MAX_ENDPOINT_INDEX 1
// #define NO_DEVICE_REMOTE_WAKEUP
// #define NO_DEVICE_SELF_POWER
#else
#error Unsupported architecture for this LUFA configuration file.

12
Demos/Device/LowLevel/Mouse/Mouse.c
Unescape View File

@ -73,12 +73,24 @@ int main(void)
/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
#if (ARCH == ARCH_AVR8)
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
#elif (ARCH == ARCH_XMEGA)
/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
#endif
/* Hardware Initialization */
Joystick_Init();

1
Demos/Device/LowLevel/Mouse/Mouse.h
Unescape View File

@ -50,6 +50,7 @@
#include <LUFA/Drivers/Board/Joystick.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Board/Buttons.h>
#include <LUFA/Platform/Platform.h>
/* Macros: */
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */

3
Demos/Device/LowLevel/Mouse/Mouse.txt
Unescape View File

@ -14,6 +14,9 @@
* \li Series 6 USB AVRs (AT90USBxxx6)
* \li Series 4 USB AVRs (ATMEGAxxU4)
* \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
* \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
* \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
* \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
*
* \section Sec_Info USB Information:
*

20
Demos/Device/LowLevel/Mouse/asf.xml
Unescape View File

@ -1,14 +1,26 @@
<asf xmlversion="1.0">
<project caption="Mouse HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.mouse.example">
<project caption="Mouse HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.mouse.example.avr8">
<require idref="lufa.demos.device.lowlevel.mouse"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="at90usb1287"/>
<config name="lufa.drivers.board.name" value="usbkey"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="8000000UL"/>
<build type="define" name="F_USB" value="8000000UL"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
</project>
<project caption="Mouse HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.mouse.example.xmega">
<require idref="lufa.demos.device.lowlevel.mouse"/>
<require idref="lufa.boards.dummy.xmega"/>
<generator value="as5_8"/>
<device-support value="atxmega128a1u"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="32000000UL"/>
<build type="define" name="F_USB" value="48000000UL"/>
</project>
<module type="application" id="lufa.demos.device.lowlevel.mouse" caption="Mouse HID Device Demo (Low Level APIs)">

33
Demos/Device/LowLevel/RNDISEthernet/Config/LUFAConfig.h
Unescape View File

@ -85,6 +85,39 @@
// #define NO_AUTO_VBUS_MANAGEMENT
// #define INVERTED_VBUS_ENABLE_LINE
#elif (ARCH == ARCH_XMEGA)
/* Non-USB Related Configuration Tokens: */
// #define DISABLE_TERMINAL_CODES
/* USB Class Driver Related Tokens: */
// #define HID_HOST_BOOT_PROTOCOL_ONLY
// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
// #define HID_MAX_COLLECTIONS {Insert Value Here}
// #define HID_MAX_REPORTITEMS {Insert Value Here}
// #define HID_MAX_REPORT_IDS {Insert Value Here}
// #define NO_CLASS_DRIVER_AUTOFLUSH
/* General USB Driver Related Tokens: */
#define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
// #define NO_LIMITED_CONTROLLER_CONNECT
// #define NO_SOF_EVENTS
/* USB Device Mode Driver Related Tokens: */
// #define USE_RAM_DESCRIPTORS
#define USE_FLASH_DESCRIPTORS
// #define USE_EEPROM_DESCRIPTORS
// #define NO_INTERNAL_SERIAL
#define FIXED_CONTROL_ENDPOINT_SIZE 8
// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
#define FIXED_NUM_CONFIGURATIONS 1
// #define CONTROL_ONLY_DEVICE
#define MAX_ENDPOINT_INDEX 3
// #define NO_DEVICE_REMOTE_WAKEUP
// #define NO_DEVICE_SELF_POWER
#else
#error Unsupported architecture for this LUFA configuration file.

12
Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.c
Unescape View File

@ -62,12 +62,24 @@ int main(void)
/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
#if (ARCH == ARCH_AVR8)
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
#elif (ARCH == ARCH_XMEGA)
/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
#endif
/* Hardware Initialization */
LEDs_Init();

1
Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.h
Unescape View File

@ -55,6 +55,7 @@
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Drivers/Peripheral/Serial.h>
#include <LUFA/Platform/Platform.h>
/* Macros: */
/** Notification value to indicate that a frame is ready to be read by the host. */

3
Demos/Device/LowLevel/RNDISEthernet/RNDISEthernet.txt
Unescape View File

@ -12,6 +12,9 @@
*
* \li Series 7 USB AVRs (AT90USBxxx7)
* \li Series 6 USB AVRs (AT90USBxxx6)
* \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
* \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
* \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
*
* \section Sec_Info USB Information:
*

20
Demos/Device/LowLevel/RNDISEthernet/asf.xml
Unescape View File

@ -1,14 +1,26 @@
<asf xmlversion="1.0">
<project caption="RNDIS Ethernet Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.rndis.example">
<project caption="RNDIS Ethernet Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.rndis.example.avr8">
<require idref="lufa.demos.device.lowlevel.rndis"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="at90usb1287"/>
<config name="lufa.drivers.board.name" value="usbkey"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="8000000UL"/>
<build type="define" name="F_USB" value="8000000UL"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
</project>
<project caption="RNDIS Ethernet Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.rndis.example.xmega">
<require idref="lufa.demos.device.lowlevel.rndis"/>
<require idref="lufa.boards.dummy.xmega"/>
<generator value="as5_8"/>
<device-support value="atxmega128a1u"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="32000000UL"/>
<build type="define" name="F_USB" value="48000000UL"/>
</project>
<module type="application" id="lufa.demos.device.lowlevel.rndis" caption="RNDIS Ethernet Device Demo (Low Level APIs)">

33
Demos/Device/LowLevel/VirtualSerial/Config/LUFAConfig.h
Unescape View File

@ -85,6 +85,39 @@
// #define NO_AUTO_VBUS_MANAGEMENT
// #define INVERTED_VBUS_ENABLE_LINE
#elif (ARCH == ARCH_XMEGA)
/* Non-USB Related Configuration Tokens: */
// #define DISABLE_TERMINAL_CODES
/* USB Class Driver Related Tokens: */
// #define HID_HOST_BOOT_PROTOCOL_ONLY
// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
// #define HID_MAX_COLLECTIONS {Insert Value Here}
// #define HID_MAX_REPORTITEMS {Insert Value Here}
// #define HID_MAX_REPORT_IDS {Insert Value Here}
// #define NO_CLASS_DRIVER_AUTOFLUSH
/* General USB Driver Related Tokens: */
#define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_RC32MCLKSRC | USB_OPT_BUSEVENT_PRIHIGH)
// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
// #define NO_LIMITED_CONTROLLER_CONNECT
// #define NO_SOF_EVENTS
/* USB Device Mode Driver Related Tokens: */
// #define USE_RAM_DESCRIPTORS
#define USE_FLASH_DESCRIPTORS
// #define USE_EEPROM_DESCRIPTORS
// #define NO_INTERNAL_SERIAL
#define FIXED_CONTROL_ENDPOINT_SIZE 8
// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
#define FIXED_NUM_CONFIGURATIONS 1
// #define CONTROL_ONLY_DEVICE
#define MAX_ENDPOINT_INDEX 4
// #define NO_DEVICE_REMOTE_WAKEUP
// #define NO_DEVICE_SELF_POWER
#else
#error Unsupported architecture for this LUFA configuration file.

12
Demos/Device/LowLevel/VirtualSerial/VirtualSerial.c
Unescape View File

@ -70,12 +70,24 @@ int main(void)
/** Configures the board hardware and chip peripherals for the demo's functionality. */
void SetupHardware(void)
{
#if (ARCH == ARCH_AVR8)
/* Disable watchdog if enabled by bootloader/fuses */
MCUSR &= ~(1 << WDRF);
wdt_disable();
/* Disable clock division */
clock_prescale_set(clock_div_1);
#elif (ARCH == ARCH_XMEGA)
/* Start the PLL to multiply the 2MHz RC oscillator to 32MHz and switch the CPU core to run from it */
XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
/* Start the 32MHz internal RC oscillator and start the DFLL to increase it to 48MHz using the USB SOF as a reference */
XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
PMIC.CTRL = PMIC_LOLVLEN_bm | PMIC_MEDLVLEN_bm | PMIC_HILVLEN_bm;
#endif
/* Hardware Initialization */
Joystick_Init();

1
Demos/Device/LowLevel/VirtualSerial/VirtualSerial.h
Unescape View File

@ -48,6 +48,7 @@
#include <LUFA/Drivers/USB/USB.h>
#include <LUFA/Drivers/Board/Joystick.h>
#include <LUFA/Drivers/Board/LEDs.h>
#include <LUFA/Platform/Platform.h>
/* Macros: */
/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */

3
Demos/Device/LowLevel/VirtualSerial/VirtualSerial.txt
Unescape View File

@ -14,6 +14,9 @@
* \li Series 6 USB AVRs (AT90USBxxx6)
* \li Series 4 USB AVRs (ATMEGAxxU4)
* \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
* \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
* \li Series B XMEGA AVRs (ATXMEGAxxxBxU)
* \li Series C XMEGA AVRs (ATXMEGAxxxCxU)
*
* \section Sec_Info USB Information:
*

20
Demos/Device/LowLevel/VirtualSerial/asf.xml
Unescape View File

@ -1,14 +1,26 @@
<asf xmlversion="1.0">
<project caption="Virtual Serial CDC Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.cdc.example">
<project caption="Virtual Serial CDC Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.cdc.example.avr8">
<require idref="lufa.demos.device.lowlevel.cdc"/>
<require idref="lufa.boards.dummy.avr8"/>
<generator value="as5_8"/>
<device-support value="at90usb1287"/>
<config name="lufa.drivers.board.name" value="usbkey"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="8000000UL"/>
<build type="define" name="F_USB" value="8000000UL"/>
<build type="define" name="F_CPU" value="16000000UL"/>
<build type="define" name="F_USB" value="16000000UL"/>
</project>
<project caption="Virtual Serial CDC Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.cdc.example.xmega">
<require idref="lufa.demos.device.lowlevel.cdc"/>
<require idref="lufa.boards.dummy.xmega"/>
<generator value="as5_8"/>
<device-support value="atxmega128a1u"/>
<config name="lufa.drivers.board.name" value="none"/>
<build type="define" name="F_CPU" value="32000000UL"/>
<build type="define" name="F_USB" value="48000000UL"/>
</project>
<module type="application" id="lufa.demos.device.lowlevel.cdc" caption="Virtual Serial CDC Device Demo (Low Level APIs)">

Write Preview
Loading…
Cancel
Save