Dean Camera
13 years ago
parent
26cc2e9fa8
commit
2b332d3231
@ -1,723 +0,0 @@ |
|||||||
# Hey Emacs, this is a -*- makefile -*- |
|
||||||
#---------------------------------------------------------------------------- |
|
||||||
# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al. |
|
||||||
# >> Modified for use with the LUFA project. << |
|
||||||
# |
|
||||||
# Released to the Public Domain |
|
||||||
# |
|
||||||
# Additional material for this makefile was written by: |
|
||||||
# Peter Fleury |
|
||||||
# Tim Henigan |
|
||||||
# Colin O'Flynn |
|
||||||
# Reiner Patommel |
|
||||||
# Markus Pfaff |
|
||||||
# Sander Pool |
|
||||||
# Frederik Rouleau |
|
||||||
# Carlos Lamas |
|
||||||
# Dean Camera |
|
||||||
# Opendous Inc. |
|
||||||
# Denver Gingerich |
|
||||||
# |
|
||||||
#---------------------------------------------------------------------------- |
|
||||||
# On command line: |
|
||||||
# |
|
||||||
# make all = Make software. |
|
||||||
# |
|
||||||
# make clean = Clean out built project files. |
|
||||||
# |
|
||||||
# make coff = Convert ELF to AVR COFF. |
|
||||||
# |
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF. |
|
||||||
# |
|
||||||
# make program = Download the hex file to the device, using avrdude. |
|
||||||
# Please customize the avrdude settings below first! |
|
||||||
# |
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must |
|
||||||
# have dfu-programmer installed). |
|
||||||
# |
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must |
|
||||||
# have Atmel FLIP installed). |
|
||||||
# |
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer |
|
||||||
# (must have dfu-programmer installed). |
|
||||||
# |
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP |
|
||||||
# (must have Atmel FLIP installed). |
|
||||||
# |
|
||||||
# make doxygen = Generate DoxyGen documentation for the project (must have |
|
||||||
# DoxyGen installed) |
|
||||||
# |
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging, |
|
||||||
# with avr-gdb or avr-insight as the front end for debugging. |
|
||||||
# |
|
||||||
# make filename.s = Just compile filename.c into the assembler code only. |
|
||||||
# |
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting |
|
||||||
# bug reports to the GCC project. |
|
||||||
# |
|
||||||
# To rebuild project do "make clean" then "make all". |
|
||||||
#---------------------------------------------------------------------------- |
|
||||||
|
|
||||||
|
|
||||||
# MCU name |
|
||||||
MCU = at90usb1287 |
|
||||||
|
|
||||||
|
|
||||||
# Target architecture (see library "Board Types" documentation). |
|
||||||
ARCH = AVR8 |
|
||||||
|
|
||||||
|
|
||||||
# Target board (see library "Board Types" documentation, NONE for projects not requiring |
|
||||||
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called |
|
||||||
# "Board" inside the application directory. |
|
||||||
BOARD = NONE |
|
||||||
|
|
||||||
|
|
||||||
# Processor frequency. |
|
||||||
# This will define a symbol, F_CPU, in all source code files equal to the |
|
||||||
# processor frequency in Hz. You can then use this symbol in your source code to |
|
||||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done |
|
||||||
# automatically to create a 32-bit value in your source code. |
|
||||||
# |
|
||||||
# This will be an integer division of F_USB below, as it is sourced by |
|
||||||
# F_USB after it has run through any CPU prescalers. Note that this value |
|
||||||
# does not *change* the processor frequency - it should merely be updated to |
|
||||||
# reflect the processor speed set externally so that the code can use accurate |
|
||||||
# software delays. |
|
||||||
F_CPU = 16000000 |
|
||||||
|
|
||||||
|
|
||||||
# Input clock frequency. |
|
||||||
# This will define a symbol, F_USB, in all source code files equal to the |
|
||||||
# input clock frequency (before any prescaling is performed) in Hz. This value may |
|
||||||
# differ from F_CPU if prescaling is used on the latter, and is required as the |
|
||||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed |
|
||||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' |
|
||||||
# at the end, this will be done automatically to create a 32-bit value in your |
|
||||||
# source code. |
|
||||||
# |
|
||||||
# If no clock division is performed on the input clock inside the AVR (via the |
|
||||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. |
|
||||||
F_USB = $(F_CPU) |
|
||||||
|
|
||||||
|
|
||||||
# Output format. (can be srec, ihex, binary) |
|
||||||
FORMAT = ihex |
|
||||||
|
|
||||||
|
|
||||||
# Target file name (without extension). |
|
||||||
TARGET = Test |
|
||||||
|
|
||||||
|
|
||||||
# Object files directory |
|
||||||
# To put object files in current directory, use a dot (.), do NOT make |
|
||||||
# this an empty or blank macro! |
|
||||||
OBJDIR = . |
|
||||||
|
|
||||||
|
|
||||||
# Path to the LUFA library |
|
||||||
LUFA_PATH = ../.. |
|
||||||
|
|
||||||
|
|
||||||
# LUFA library compile-time options and predefined tokens |
|
||||||
LUFA_OPTS = |
|
||||||
|
|
||||||
|
|
||||||
# Create the LUFA source path variables by including the LUFA root makefile |
|
||||||
include $(LUFA_PATH)/LUFA/makefile |
|
||||||
|
|
||||||
|
|
||||||
# List C source files here. (C dependencies are automatically generated.) |
|
||||||
SRC = Test.c |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# List C++ source files here. (C dependencies are automatically generated.) |
|
||||||
CPPSRC = |
|
||||||
|
|
||||||
|
|
||||||
# List Assembler source files here. |
|
||||||
# Make them always end in a capital .S. Files ending in a lowercase .s |
|
||||||
# will not be considered source files but generated files (assembler |
|
||||||
# output from the compiler), and will be deleted upon "make clean"! |
|
||||||
# Even though the DOS/Win* filesystem matches both .s and .S the same, |
|
||||||
# it will preserve the spelling of the filenames, and gcc itself does |
|
||||||
# care about how the name is spelled on its command-line. |
|
||||||
ASRC = |
|
||||||
|
|
||||||
|
|
||||||
# Optimization level, can be [0, 1, 2, 3, s]. |
|
||||||
# 0 = turn off optimization. s = optimize for size. |
|
||||||
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) |
|
||||||
OPT = 1 |
|
||||||
|
|
||||||
|
|
||||||
# Debugging format. |
|
||||||
# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs. |
|
||||||
# AVR Studio 4.10 requires dwarf-2. |
|
||||||
# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run. |
|
||||||
DEBUG = dwarf-2 |
|
||||||
|
|
||||||
|
|
||||||
# List any extra directories to look for include files here. |
|
||||||
# Each directory must be seperated by a space. |
|
||||||
# Use forward slashes for directory separators. |
|
||||||
# For a directory that has spaces, enclose it in quotes. |
|
||||||
EXTRAINCDIRS = $(LUFA_PATH)/ |
|
||||||
|
|
||||||
|
|
||||||
# Compiler flag to set the C Standard level. |
|
||||||
# c89 = "ANSI" C |
|
||||||
# gnu89 = c89 plus GCC extensions |
|
||||||
# c99 = ISO C99 standard (not yet fully implemented) |
|
||||||
# gnu99 = c99 plus GCC extensions |
|
||||||
CSTANDARD = -std=c99 |
|
||||||
|
|
||||||
|
|
||||||
# Place -D or -U options here for C sources |
|
||||||
CDEFS = -DF_CPU=$(F_CPU)UL |
|
||||||
CDEFS += -DF_USB=$(F_USB)UL |
|
||||||
CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH) |
|
||||||
CDEFS += $(LUFA_OPTS) |
|
||||||
|
|
||||||
|
|
||||||
# Place -D or -U options here for ASM sources |
|
||||||
ADEFS = -DF_CPU=$(F_CPU) |
|
||||||
ADEFS += -DF_USB=$(F_USB)UL |
|
||||||
ADEFS += -DBOARD=BOARD_$(BOARD) |
|
||||||
ADEFS += $(LUFA_OPTS) |
|
||||||
|
|
||||||
# Place -D or -U options here for C++ sources |
|
||||||
CPPDEFS = -DF_CPU=$(F_CPU)UL |
|
||||||
CPPDEFS += -DF_USB=$(F_USB)UL |
|
||||||
CPPDEFS += -DBOARD=BOARD_$(BOARD) |
|
||||||
CPPDEFS += $(LUFA_OPTS) |
|
||||||
#CPPDEFS += -D__STDC_LIMIT_MACROS |
|
||||||
#CPPDEFS += -D__STDC_CONSTANT_MACROS |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#---------------- Compiler Options C ---------------- |
|
||||||
# -g*: generate debugging information |
|
||||||
# -O*: optimization level |
|
||||||
# -f...: tuning, see GCC manual and avr-libc documentation |
|
||||||
# -Wall...: warning level |
|
||||||
# -Wa,...: tell GCC to pass this to the assembler. |
|
||||||
# -adhlns...: create assembler listing |
|
||||||
CFLAGS = -g$(DEBUG) |
|
||||||
CFLAGS += $(CDEFS) |
|
||||||
CFLAGS += -O$(OPT) |
|
||||||
CFLAGS += -funsigned-char |
|
||||||
CFLAGS += -funsigned-bitfields |
|
||||||
CFLAGS += -ffunction-sections |
|
||||||
CFLAGS += -fno-inline-small-functions |
|
||||||
CFLAGS += -fpack-struct |
|
||||||
CFLAGS += -fshort-enums |
|
||||||
CFLAGS += -fno-strict-aliasing |
|
||||||
CFLAGS += -fno-split-wide-types |
|
||||||
CFLAGS += -Wall |
|
||||||
CFLAGS += -Wstrict-prototypes |
|
||||||
#CFLAGS += -mshort-calls |
|
||||||
#CFLAGS += -fno-unit-at-a-time |
|
||||||
#CFLAGS += -Wundef |
|
||||||
#CFLAGS += -Wunreachable-code |
|
||||||
#CFLAGS += -Wsign-compare |
|
||||||
#CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) |
|
||||||
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) |
|
||||||
CFLAGS += $(CSTANDARD) |
|
||||||
|
|
||||||
|
|
||||||
#---------------- Compiler Options C++ ---------------- |
|
||||||
# -g*: generate debugging information |
|
||||||
# -O*: optimization level |
|
||||||
# -f...: tuning, see GCC manual and avr-libc documentation |
|
||||||
# -Wall...: warning level |
|
||||||
# -Wa,...: tell GCC to pass this to the assembler. |
|
||||||
# -adhlns...: create assembler listing |
|
||||||
CPPFLAGS = -g$(DEBUG) |
|
||||||
CPPFLAGS += $(CPPDEFS) |
|
||||||
CPPFLAGS += -O$(OPT) |
|
||||||
CPPFLAGS += -funsigned-char |
|
||||||
CPPFLAGS += -funsigned-bitfields |
|
||||||
CPPFLAGS += -fpack-struct |
|
||||||
CPPFLAGS += -fshort-enums |
|
||||||
CPPFLAGS += -fno-exceptions |
|
||||||
CPPFLAGS += -Wall |
|
||||||
CPPFLAGS += -Wundef |
|
||||||
#CPPFLAGS += -mshort-calls |
|
||||||
#CPPFLAGS += -fno-unit-at-a-time |
|
||||||
#CPPFLAGS += -Wstrict-prototypes |
|
||||||
#CPPFLAGS += -Wunreachable-code |
|
||||||
#CPPFLAGS += -Wsign-compare |
|
||||||
#CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) |
|
||||||
CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) |
|
||||||
#CPPFLAGS += $(CSTANDARD) |
|
||||||
|
|
||||||
|
|
||||||
#---------------- Assembler Options ---------------- |
|
||||||
# -Wa,...: tell GCC to pass this to the assembler. |
|
||||||
# -adhlns: create listing |
|
||||||
# -gstabs: have the assembler create line number information; note that |
|
||||||
# for use in COFF files, additional information about filenames |
|
||||||
# and function names needs to be present in the assembler source |
|
||||||
# files -- see avr-libc docs [FIXME: not yet described there] |
|
||||||
# -listing-cont-lines: Sets the maximum number of continuation lines of hex |
|
||||||
# dump that will be displayed for a given single line of source input. |
|
||||||
ASFLAGS = $(ADEFS) |
|
||||||
#ASFLAGS += -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 |
|
||||||
|
|
||||||
|
|
||||||
#---------------- Library Options ---------------- |
|
||||||
# Minimalistic printf version |
|
||||||
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min |
|
||||||
|
|
||||||
# Floating point printf version (requires MATH_LIB = -lm below) |
|
||||||
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt |
|
||||||
|
|
||||||
# If this is left blank, then it will use the Standard printf version. |
|
||||||
PRINTF_LIB = |
|
||||||
#PRINTF_LIB = $(PRINTF_LIB_MIN) |
|
||||||
#PRINTF_LIB = $(PRINTF_LIB_FLOAT) |
|
||||||
|
|
||||||
|
|
||||||
# Minimalistic scanf version |
|
||||||
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min |
|
||||||
|
|
||||||
# Floating point + %[ scanf version (requires MATH_LIB = -lm below) |
|
||||||
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt |
|
||||||
|
|
||||||
# If this is left blank, then it will use the Standard scanf version. |
|
||||||
SCANF_LIB = |
|
||||||
#SCANF_LIB = $(SCANF_LIB_MIN) |
|
||||||
#SCANF_LIB = $(SCANF_LIB_FLOAT) |
|
||||||
|
|
||||||
|
|
||||||
MATH_LIB = -lm |
|
||||||
|
|
||||||
|
|
||||||
# List any extra directories to look for libraries here. |
|
||||||
# Each directory must be seperated by a space. |
|
||||||
# Use forward slashes for directory separators. |
|
||||||
# For a directory that has spaces, enclose it in quotes. |
|
||||||
EXTRALIBDIRS = |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#---------------- External Memory Options ---------------- |
|
||||||
|
|
||||||
# 64 KB of external RAM, starting after internal RAM (ATmega128!), |
|
||||||
# used for variables (.data/.bss) and heap (malloc()). |
|
||||||
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff |
|
||||||
|
|
||||||
# 64 KB of external RAM, starting after internal RAM (ATmega128!), |
|
||||||
# only used for heap (malloc()). |
|
||||||
#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff |
|
||||||
|
|
||||||
EXTMEMOPTS = |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#---------------- Linker Options ---------------- |
|
||||||
# -Wl,...: tell GCC to pass this to linker. |
|
||||||
# -Map: create map file |
|
||||||
# --cref: add cross reference to map file |
|
||||||
#LDFLAGS = -Wl,-Map=$(TARGET).map,--cref |
|
||||||
LDFLAGS += -Wl,--relax |
|
||||||
LDFLAGS += -Wl,--gc-sections |
|
||||||
LDFLAGS += $(EXTMEMOPTS) |
|
||||||
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) |
|
||||||
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB) |
|
||||||
#LDFLAGS += -T linker_script.x |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#---------------- Programming Options (avrdude) ---------------- |
|
||||||
|
|
||||||
# Programming hardware |
|
||||||
# Type: avrdude -c ? |
|
||||||
# to get a full listing. |
|
||||||
# |
|
||||||
AVRDUDE_PROGRAMMER = jtagmkII |
|
||||||
|
|
||||||
# com1 = serial port. Use lpt1 to connect to parallel port. |
|
||||||
AVRDUDE_PORT = usb |
|
||||||
|
|
||||||
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex |
|
||||||
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep |
|
||||||
|
|
||||||
|
|
||||||
# Uncomment the following if you want avrdude's erase cycle counter. |
|
||||||
# Note that this counter needs to be initialized first using -Yn, |
|
||||||
# see avrdude manual. |
|
||||||
#AVRDUDE_ERASE_COUNTER = -y |
|
||||||
|
|
||||||
# Uncomment the following if you do /not/ wish a verification to be |
|
||||||
# performed after programming the device. |
|
||||||
#AVRDUDE_NO_VERIFY = -V |
|
||||||
|
|
||||||
# Increase verbosity level. Please use this when submitting bug |
|
||||||
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> |
|
||||||
# to submit bug reports. |
|
||||||
#AVRDUDE_VERBOSE = -v -v |
|
||||||
|
|
||||||
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) |
|
||||||
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY) |
|
||||||
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE) |
|
||||||
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER) |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#---------------- Debugging Options ---------------- |
|
||||||
|
|
||||||
# For simulavr only - target MCU frequency. |
|
||||||
DEBUG_MFREQ = $(F_CPU) |
|
||||||
|
|
||||||
# Set the DEBUG_UI to either gdb or insight. |
|
||||||
# DEBUG_UI = gdb |
|
||||||
DEBUG_UI = insight |
|
||||||
|
|
||||||
# Set the debugging back-end to either avarice, simulavr. |
|
||||||
DEBUG_BACKEND = avarice |
|
||||||
#DEBUG_BACKEND = simulavr |
|
||||||
|
|
||||||
# GDB Init Filename. |
|
||||||
GDBINIT_FILE = __avr_gdbinit |
|
||||||
|
|
||||||
# When using avarice settings for the JTAG |
|
||||||
JTAG_DEV = /dev/com1 |
|
||||||
|
|
||||||
# Debugging port used to communicate between GDB / avarice / simulavr. |
|
||||||
DEBUG_PORT = 4242 |
|
||||||
|
|
||||||
# Debugging host used to communicate between GDB / avarice / simulavr, normally |
|
||||||
# just set to localhost unless doing some sort of crazy debugging when |
|
||||||
# avarice is running on a different computer. |
|
||||||
DEBUG_HOST = localhost |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#============================================================================ |
|
||||||
|
|
||||||
|
|
||||||
# Define programs and commands. |
|
||||||
SHELL = sh |
|
||||||
CC = avr-gcc |
|
||||||
OBJCOPY = avr-objcopy |
|
||||||
OBJDUMP = avr-objdump |
|
||||||
SIZE = avr-size |
|
||||||
AR = avr-ar rcs |
|
||||||
NM = avr-nm |
|
||||||
AVRDUDE = avrdude |
|
||||||
REMOVE = rm -f |
|
||||||
REMOVEDIR = rm -rf |
|
||||||
COPY = cp |
|
||||||
WINSHELL = cmd |
|
||||||
|
|
||||||
|
|
||||||
# Define Messages |
|
||||||
# English |
|
||||||
MSG_ERRORS_NONE = Errors: none |
|
||||||
MSG_BEGIN = -------- begin -------- |
|
||||||
MSG_END = -------- end -------- |
|
||||||
MSG_SIZE_BEFORE = Size before: |
|
||||||
MSG_SIZE_AFTER = Size after: |
|
||||||
MSG_COFF = Converting to AVR COFF: |
|
||||||
MSG_EXTENDED_COFF = Converting to AVR Extended COFF: |
|
||||||
MSG_FLASH = Creating load file for Flash: |
|
||||||
MSG_EEPROM = Creating load file for EEPROM: |
|
||||||
MSG_EXTENDED_LISTING = Creating Extended Listing: |
|
||||||
MSG_SYMBOL_TABLE = Creating Symbol Table: |
|
||||||
MSG_LINKING = Linking: |
|
||||||
MSG_COMPILING = Compiling C: |
|
||||||
MSG_COMPILING_CPP = Compiling C++: |
|
||||||
MSG_ASSEMBLING = Assembling: |
|
||||||
MSG_CLEANING = Cleaning project: |
|
||||||
MSG_CREATING_LIBRARY = Creating library: |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Define all object files. |
|
||||||
OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) |
|
||||||
|
|
||||||
# Define all listing files. |
|
||||||
LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) |
|
||||||
|
|
||||||
|
|
||||||
# Compiler flags to generate dependency files. |
|
||||||
#GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d |
|
||||||
|
|
||||||
|
|
||||||
# Combine all necessary flags and optional flags. |
|
||||||
# Add target processor to flags. |
|
||||||
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS) |
|
||||||
ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS) |
|
||||||
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Default target. |
|
||||||
all: begin gccversion sizebefore build sizeafter end |
|
||||||
|
|
||||||
# Change the build target to build a HEX file or a library. |
|
||||||
build: elf hex eep lss sym |
|
||||||
#build: lib |
|
||||||
|
|
||||||
|
|
||||||
elf: $(TARGET).elf |
|
||||||
hex: $(TARGET).hex |
|
||||||
eep: $(TARGET).eep |
|
||||||
lss: $(TARGET).lss |
|
||||||
sym: $(TARGET).sym |
|
||||||
LIBNAME=lib$(TARGET).a |
|
||||||
lib: $(LIBNAME) |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Eye candy. |
|
||||||
# AVR Studio 3.x does not check make's exit code but relies on |
|
||||||
# the following magic strings to be generated by the compile job. |
|
||||||
begin: |
|
||||||
@echo |
|
||||||
@echo $(MSG_BEGIN) |
|
||||||
|
|
||||||
end: |
|
||||||
@echo $(MSG_END) |
|
||||||
@echo |
|
||||||
|
|
||||||
|
|
||||||
# Display size of file. |
|
||||||
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex |
|
||||||
ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf |
|
||||||
MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) ) |
|
||||||
FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr ) |
|
||||||
|
|
||||||
|
|
||||||
sizebefore: |
|
||||||
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \ |
|
||||||
2>/dev/null; echo; fi |
|
||||||
|
|
||||||
sizeafter: |
|
||||||
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ |
|
||||||
2>/dev/null; echo; fi |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Display compiler version information. |
|
||||||
gccversion : |
|
||||||
@$(CC) --version |
|
||||||
|
|
||||||
|
|
||||||
# Program the device. |
|
||||||
program: $(TARGET).hex $(TARGET).eep |
|
||||||
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) |
|
||||||
|
|
||||||
flip: $(TARGET).hex |
|
||||||
batchisp -hardware usb -device $(MCU) -operation erase f |
|
||||||
batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program |
|
||||||
batchisp -hardware usb -device $(MCU) -operation start reset 0 |
|
||||||
|
|
||||||
dfu: $(TARGET).hex |
|
||||||
dfu-programmer $(MCU) erase |
|
||||||
dfu-programmer $(MCU) flash $(TARGET).hex |
|
||||||
dfu-programmer $(MCU) reset |
|
||||||
|
|
||||||
flip-ee: $(TARGET).hex $(TARGET).eep |
|
||||||
$(COPY) $(TARGET).eep $(TARGET)eep.hex |
|
||||||
batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase |
|
||||||
batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program |
|
||||||
batchisp -hardware usb -device $(MCU) -operation start reset 0 |
|
||||||
$(REMOVE) $(TARGET)eep.hex |
|
||||||
|
|
||||||
dfu-ee: $(TARGET).hex $(TARGET).eep |
|
||||||
dfu-programmer $(MCU) eeprom-flash $(TARGET).eep |
|
||||||
dfu-programmer $(MCU) reset |
|
||||||
|
|
||||||
|
|
||||||
# Generate avr-gdb config/init file which does the following: |
|
||||||
# define the reset signal, load the target file, connect to target, and set |
|
||||||
# a breakpoint at main(). |
|
||||||
gdb-config: |
|
||||||
@$(REMOVE) $(GDBINIT_FILE) |
|
||||||
@echo define reset >> $(GDBINIT_FILE) |
|
||||||
@echo SIGNAL SIGHUP >> $(GDBINIT_FILE) |
|
||||||
@echo end >> $(GDBINIT_FILE) |
|
||||||
@echo file $(TARGET).elf >> $(GDBINIT_FILE) |
|
||||||
@echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE) |
|
||||||
ifeq ($(DEBUG_BACKEND),simulavr) |
|
||||||
@echo load >> $(GDBINIT_FILE) |
|
||||||
endif |
|
||||||
@echo break main >> $(GDBINIT_FILE) |
|
||||||
|
|
||||||
debug: gdb-config $(TARGET).elf |
|
||||||
ifeq ($(DEBUG_BACKEND), avarice) |
|
||||||
@echo Starting AVaRICE - Press enter when "waiting to connect" message displays. |
|
||||||
@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \ |
|
||||||
$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT) |
|
||||||
@$(WINSHELL) /c pause |
|
||||||
|
|
||||||
else |
|
||||||
@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \ |
|
||||||
$(DEBUG_MFREQ) --port $(DEBUG_PORT) |
|
||||||
endif |
|
||||||
@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE) |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. |
|
||||||
COFFCONVERT = $(OBJCOPY) --debugging |
|
||||||
COFFCONVERT += --change-section-address .data-0x800000 |
|
||||||
COFFCONVERT += --change-section-address .bss-0x800000 |
|
||||||
COFFCONVERT += --change-section-address .noinit-0x800000 |
|
||||||
COFFCONVERT += --change-section-address .eeprom-0x810000 |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
coff: $(TARGET).elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_COFF) $(TARGET).cof |
|
||||||
$(COFFCONVERT) -O coff-avr $< $(TARGET).cof |
|
||||||
|
|
||||||
|
|
||||||
extcoff: $(TARGET).elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_EXTENDED_COFF) $(TARGET).cof |
|
||||||
$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Create final output files (.hex, .eep) from ELF output file. |
|
||||||
%.hex: %.elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_FLASH) $@ |
|
||||||
$(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock $< $@ |
|
||||||
|
|
||||||
%.eep: %.elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_EEPROM) $@ |
|
||||||
-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ |
|
||||||
--change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0 |
|
||||||
|
|
||||||
# Create extended listing file from ELF output file. |
|
||||||
%.lss: %.elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_EXTENDED_LISTING) $@ |
|
||||||
$(OBJDUMP) -h -S -z $< > $@ |
|
||||||
|
|
||||||
# Create a symbol table from ELF output file. |
|
||||||
%.sym: %.elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_SYMBOL_TABLE) $@ |
|
||||||
$(NM) -n $< > $@ |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Create library from object files. |
|
||||||
.SECONDARY : $(TARGET).a |
|
||||||
.PRECIOUS : $(OBJ) |
|
||||||
%.a: $(OBJ) |
|
||||||
@echo |
|
||||||
@echo $(MSG_CREATING_LIBRARY) $@ |
|
||||||
$(AR) $@ $(OBJ) |
|
||||||
|
|
||||||
|
|
||||||
# Link: create ELF output file from object files. |
|
||||||
.SECONDARY : $(TARGET).elf |
|
||||||
.PRECIOUS : $(OBJ) |
|
||||||
%.elf: $(OBJ) |
|
||||||
@echo |
|
||||||
@echo $(MSG_LINKING) $@ |
|
||||||
$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS) |
|
||||||
|
|
||||||
|
|
||||||
# Compile: create object files from C source files. |
|
||||||
$(OBJDIR)/%.o : %.c |
|
||||||
@echo |
|
||||||
@echo $(MSG_COMPILING) $< |
|
||||||
$(CC) -c $(ALL_CFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Compile: create object files from C++ source files. |
|
||||||
$(OBJDIR)/%.o : %.cpp |
|
||||||
@echo |
|
||||||
@echo $(MSG_COMPILING_CPP) $< |
|
||||||
$(CC) -c $(ALL_CPPFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Compile: create assembler files from C source files. |
|
||||||
%.s : %.c |
|
||||||
$(CC) -S $(ALL_CFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Compile: create assembler files from C++ source files. |
|
||||||
%.s : %.cpp |
|
||||||
$(CC) -S $(ALL_CPPFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Assemble: create object files from assembler source files. |
|
||||||
$(OBJDIR)/%.o : %.S |
|
||||||
@echo |
|
||||||
@echo $(MSG_ASSEMBLING) $< |
|
||||||
$(CC) -c $(ALL_ASFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Create preprocessed source for use in sending a bug report. |
|
||||||
%.i : %.c |
|
||||||
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Target: clean project. |
|
||||||
clean: begin clean_list end |
|
||||||
|
|
||||||
clean_list : |
|
||||||
@echo |
|
||||||
@echo $(MSG_CLEANING) |
|
||||||
$(REMOVE) $(TARGET).hex |
|
||||||
$(REMOVE) $(TARGET).eep |
|
||||||
$(REMOVE) $(TARGET).cof |
|
||||||
$(REMOVE) $(TARGET).elf |
|
||||||
$(REMOVE) $(TARGET).map |
|
||||||
$(REMOVE) $(TARGET).sym |
|
||||||
$(REMOVE) $(TARGET).lss |
|
||||||
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) |
|
||||||
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) |
|
||||||
$(REMOVE) $(SRC:.c=.s) |
|
||||||
$(REMOVE) $(SRC:.c=.d) |
|
||||||
$(REMOVE) $(SRC:.c=.i) |
|
||||||
$(REMOVEDIR) .dep |
|
||||||
|
|
||||||
doxygen: |
|
||||||
@echo Generating Project Documentation \($(TARGET)\)... |
|
||||||
@if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ |
|
||||||
exit 1; \ |
|
||||||
fi; |
|
||||||
@echo Documentation Generation Complete. |
|
||||||
|
|
||||||
clean_doxygen: |
|
||||||
rm -rf Documentation |
|
||||||
|
|
||||||
checksource: |
|
||||||
@for f in $(SRC) $(CPPSRC) $(ASRC); do \ |
|
||||||
if [ -f $$f ]; then \ |
|
||||||
echo "Found Source File: $$f" ; \ |
|
||||||
else \ |
|
||||||
echo "Source File Not Found: $$f" ; \ |
|
||||||
fi; done |
|
||||||
|
|
||||||
|
|
||||||
# Create object files directory |
|
||||||
$(shell mkdir $(OBJDIR) 2>/dev/null) |
|
||||||
|
|
||||||
|
|
||||||
# Include the dependency files. |
|
||||||
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*) |
|
||||||
|
|
||||||
|
|
||||||
# Listing of phony targets. |
|
||||||
.PHONY : all begin finish end sizebefore sizeafter gccversion \ |
|
||||||
build elf hex eep lss sym coff extcoff doxygen clean \ |
|
||||||
clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ |
|
||||||
debug gdb-config checksource |
|
||||||
@ -0,0 +1,24 @@ |
|||||||
|
# |
||||||
|
# LUFA Library |
||||||
|
# Copyright (C) Dean Camera, 2012. |
||||||
|
# |
||||||
|
# dean [at] fourwalledcubicle [dot] com |
||||||
|
# www.lufa-lib.org |
||||||
|
# |
||||||
|
# -------------------------------------- |
||||||
|
# LUFA Project Makefile. |
||||||
|
# -------------------------------------- |
||||||
|
|
||||||
|
MCU = at90usb1287 |
||||||
|
ARCH = AVR8 |
||||||
|
BOARD = NONE |
||||||
|
F_CPU = 8000000 |
||||||
|
F_USB = $(F_CPU) |
||||||
|
OPTIMIZATION = 1 |
||||||
|
TARGET = Test |
||||||
|
SRC = $(TARGET).c |
||||||
|
LUFA_PATH = ../../LUFA/ |
||||||
|
CC_FLAGS = -Werror |
||||||
|
|
||||||
|
# Include LUFA build script makefiles |
||||||
|
include $(LUFA_PATH)/Build/lufa.build.in |
||||||
@ -1,486 +0,0 @@ |
|||||||
# Hey Emacs, this is a -*- makefile -*- |
|
||||||
#---------------------------------------------------------------------------- |
|
||||||
# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al. |
|
||||||
# >> Modified for use with the LUFA project. << |
|
||||||
# |
|
||||||
# Released to the Public Domain |
|
||||||
# |
|
||||||
# Additional material for this makefile was written by: |
|
||||||
# Peter Fleury |
|
||||||
# Tim Henigan |
|
||||||
# Colin O'Flynn |
|
||||||
# Reiner Patommel |
|
||||||
# Markus Pfaff |
|
||||||
# Sander Pool |
|
||||||
# Frederik Rouleau |
|
||||||
# Carlos Lamas |
|
||||||
# Dean Camera |
|
||||||
# Opendous Inc. |
|
||||||
# Denver Gingerich |
|
||||||
# |
|
||||||
#---------------------------------------------------------------------------- |
|
||||||
# On command line: |
|
||||||
# |
|
||||||
# make all = Make software. |
|
||||||
# |
|
||||||
# make clean = Clean out built project files. |
|
||||||
# |
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must |
|
||||||
# have dfu-programmer installed). |
|
||||||
# |
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must |
|
||||||
# have Atmel FLIP installed). |
|
||||||
# |
|
||||||
# make doxygen = Generate DoxyGen documentation for the project (must have |
|
||||||
# DoxyGen installed) |
|
||||||
# |
|
||||||
# make filename.s = Just compile filename.c into the assembler code only. |
|
||||||
# |
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting |
|
||||||
# bug reports to the GCC project. |
|
||||||
# |
|
||||||
# To rebuild project do "make clean" then "make all". |
|
||||||
#---------------------------------------------------------------------------- |
|
||||||
|
|
||||||
|
|
||||||
# MCU name |
|
||||||
MCU = uc3a3256 |
|
||||||
|
|
||||||
|
|
||||||
# Targeted chip architecture (see library "Architectures" documentation) |
|
||||||
ARCH = UC3 |
|
||||||
|
|
||||||
|
|
||||||
# Target board (see library "Board Types" documentation, NONE for projects not requiring |
|
||||||
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called |
|
||||||
# "Board" inside the application directory. |
|
||||||
BOARD = NONE |
|
||||||
|
|
||||||
|
|
||||||
# Processor frequency. |
|
||||||
# This will define a symbol, F_CPU, in all source code files equal to the |
|
||||||
# processor frequency in Hz. You can then use this symbol in your source code to |
|
||||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done |
|
||||||
# automatically to create a 32-bit value in your source code. |
|
||||||
# |
|
||||||
# This should be the frequency the system core runs at, after the system clock |
|
||||||
# has been set up correctly and started. |
|
||||||
F_CPU = 12000000 |
|
||||||
|
|
||||||
|
|
||||||
# USB controller master clock frequency. |
|
||||||
# This will define a symbol, F_USB, in all source code files equal to the |
|
||||||
# input clock frequency of the USB controller's clock generator in Hz. |
|
||||||
# |
|
||||||
# For the UC3 chips, this should be equal to 48MHz or 96MHz. |
|
||||||
F_USB = 48000000 |
|
||||||
|
|
||||||
|
|
||||||
# Output format. (can be srec, ihex, binary) |
|
||||||
FORMAT = ihex |
|
||||||
|
|
||||||
|
|
||||||
# Target file name (without extension). |
|
||||||
TARGET = Test |
|
||||||
|
|
||||||
|
|
||||||
# Object files directory |
|
||||||
# To put object files in current directory, use a dot (.), do NOT make |
|
||||||
# this an empty or blank macro! |
|
||||||
OBJDIR = . |
|
||||||
|
|
||||||
|
|
||||||
# Path to the LUFA library |
|
||||||
LUFA_PATH = ../.. |
|
||||||
|
|
||||||
|
|
||||||
# LUFA library compile-time options and predefined tokens (add '-D' before each token) |
|
||||||
LUFA_OPTS = |
|
||||||
|
|
||||||
|
|
||||||
# Create the LUFA source path variables by including the LUFA root makefile |
|
||||||
include $(LUFA_PATH)/LUFA/makefile |
|
||||||
|
|
||||||
|
|
||||||
# List C source files here. (C dependencies are automatically generated.) |
|
||||||
SRC = Test.c |
|
||||||
|
|
||||||
|
|
||||||
# List C++ source files here. (C dependencies are automatically generated.) |
|
||||||
CPPSRC = |
|
||||||
|
|
||||||
|
|
||||||
# List Assembler source files here. |
|
||||||
# Make them always end in a capital .S. Files ending in a lowercase .s |
|
||||||
# will not be considered source files but generated files (assembler |
|
||||||
# output from the compiler), and will be deleted upon "make clean"! |
|
||||||
# Even though the DOS/Win* filesystem matches both .s and .S the same, |
|
||||||
# it will preserve the spelling of the filenames, and gcc itself does |
|
||||||
# care about how the name is spelled on its command-line. |
|
||||||
ASRC = |
|
||||||
|
|
||||||
|
|
||||||
# Optimization level, can be [0, 1, 2, 3, s]. |
|
||||||
# 0 = turn off optimization. s = optimize for size. |
|
||||||
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) |
|
||||||
OPT = 1 |
|
||||||
|
|
||||||
|
|
||||||
# List any extra directories to look for include files here. |
|
||||||
# Each directory must be seperated by a space. |
|
||||||
# Use forward slashes for directory separators. |
|
||||||
# For a directory that has spaces, enclose it in quotes. |
|
||||||
EXTRAINCDIRS = $(LUFA_PATH)/ |
|
||||||
|
|
||||||
|
|
||||||
# Compiler flag to set the C Standard level. |
|
||||||
# c89 = "ANSI" C |
|
||||||
# gnu89 = c89 plus GCC extensions |
|
||||||
# c99 = ISO C99 standard (not yet fully implemented) |
|
||||||
# gnu99 = c99 plus GCC extensions |
|
||||||
CSTANDARD = -std=gnu99 |
|
||||||
|
|
||||||
|
|
||||||
# Place -D or -U options here for C sources |
|
||||||
CDEFS = -DF_CPU=$(F_CPU)UL |
|
||||||
CDEFS += -DF_USB=$(F_USB)UL |
|
||||||
CDEFS += -DBOARD=BOARD_$(BOARD) |
|
||||||
CDEFS += -DARCH=ARCH_$(ARCH) |
|
||||||
CDEFS += $(LUFA_OPTS) |
|
||||||
|
|
||||||
|
|
||||||
# Place -D or -U options here for ASM sources |
|
||||||
ADEFS = -DF_CPU=$(F_CPU) |
|
||||||
ADEFS += -DF_USB=$(F_USB)UL |
|
||||||
ADEFS += -DBOARD=BOARD_$(BOARD) |
|
||||||
ADEFS += -DARCH=ARCH_$(ARCH) |
|
||||||
ADEFS += $(LUFA_OPTS) |
|
||||||
|
|
||||||
# Place -D or -U options here for C++ sources |
|
||||||
CPPDEFS = -DF_CPU=$(F_CPU)UL |
|
||||||
CPPDEFS += -DF_USB=$(F_USB)UL |
|
||||||
CPPDEFS += -DBOARD=BOARD_$(BOARD) |
|
||||||
CPPDEFS += -DARCH=ARCH_$(ARCH) |
|
||||||
CPPDEFS += $(LUFA_OPTS) |
|
||||||
|
|
||||||
|
|
||||||
# Debugging level. |
|
||||||
DEBUG = 3 |
|
||||||
|
|
||||||
|
|
||||||
#---------------- Compiler Options C ---------------- |
|
||||||
# -g*: generate debugging information |
|
||||||
# -O*: optimization level |
|
||||||
# -f...: tuning, see GCC manual and avr-libc documentation |
|
||||||
# -Wall...: warning level |
|
||||||
# -Wa,...: tell GCC to pass this to the assembler. |
|
||||||
# -adhlns...: create assembler listing |
|
||||||
CFLAGS = -g$(DEBUG) |
|
||||||
CFLAGS += $(CDEFS) |
|
||||||
CFLAGS += -O$(OPT) |
|
||||||
CFLAGS += -funsigned-char |
|
||||||
CFLAGS += -funsigned-bitfields |
|
||||||
CFLAGS += -ffunction-sections |
|
||||||
CFLAGS += -fno-strict-aliasing |
|
||||||
CFLAGS += -Wall |
|
||||||
CFLAGS += -Wstrict-prototypes |
|
||||||
CFLAGS += -masm-addr-pseudos |
|
||||||
#CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) |
|
||||||
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) |
|
||||||
CFLAGS += $(CSTANDARD) |
|
||||||
|
|
||||||
|
|
||||||
#---------------- Compiler Options C++ ---------------- |
|
||||||
# -g*: generate debugging information |
|
||||||
# -O*: optimization level |
|
||||||
# -f...: tuning, see GCC manual and avr-libc documentation |
|
||||||
# -Wall...: warning level |
|
||||||
# -Wa,...: tell GCC to pass this to the assembler. |
|
||||||
# -adhlns...: create assembler listing |
|
||||||
CPPFLAGS = -g$(DEBUG) |
|
||||||
CPPFLAGS += $(CPPDEFS) |
|
||||||
CPPFLAGS += -O$(OPT) |
|
||||||
CPPFLAGS += -funsigned-char |
|
||||||
CPPFLAGS += -funsigned-bitfields |
|
||||||
CPPFLAGS += -ffunction-sections |
|
||||||
CPPFLAGS += -fno-strict-aliasing |
|
||||||
CPPFLAGS += -fno-exceptions |
|
||||||
CPPFLAGS += -masm-addr-pseudos |
|
||||||
CPPFLAGS += -Wall |
|
||||||
CPPFLAGS += -Wundef |
|
||||||
#CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) |
|
||||||
CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) |
|
||||||
#CPPFLAGS += $(CSTANDARD) |
|
||||||
|
|
||||||
|
|
||||||
#---------------- Assembler Options ---------------- |
|
||||||
# -Wa,...: tell GCC to pass this to the assembler. |
|
||||||
# -adhlns: create listing |
|
||||||
# -gstabs: have the assembler create line number information; note that |
|
||||||
# for use in COFF files, additional information about filenames |
|
||||||
# and function names needs to be present in the assembler source |
|
||||||
# files -- see avr-libc docs [FIXME: not yet described there] |
|
||||||
# -listing-cont-lines: Sets the maximum number of continuation lines of hex |
|
||||||
# dump that will be displayed for a given single line of source input. |
|
||||||
ASFLAGS = $(ADEFS) |
|
||||||
#ASFLAGS += -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 |
|
||||||
|
|
||||||
|
|
||||||
#---------------- Linker Options ---------------- |
|
||||||
# -Wl,...: tell GCC to pass this to linker. |
|
||||||
# -Map: create map file |
|
||||||
# --cref: add cross reference to map file |
|
||||||
#LDFLAGS = -Wl,-Map=$(TARGET).map,--cref |
|
||||||
LDFLAGS += -Wl,--gc-sections --rodata-writable |
|
||||||
LDFLAGS += -Wl,--direct-data |
|
||||||
#LDFLAGS += -T linker_script.x |
|
||||||
|
|
||||||
|
|
||||||
#============================================================================ |
|
||||||
|
|
||||||
|
|
||||||
# Define programs and commands. |
|
||||||
SHELL = sh |
|
||||||
CC = avr32-gcc |
|
||||||
OBJCOPY = avr32-objcopy |
|
||||||
OBJDUMP = avr32-objdump |
|
||||||
SIZE = avr32-size |
|
||||||
AR = avr32-ar rcs |
|
||||||
NM = avr32-nm |
|
||||||
REMOVE = rm -f |
|
||||||
REMOVEDIR = rm -rf |
|
||||||
COPY = cp |
|
||||||
WINSHELL = cmd |
|
||||||
|
|
||||||
|
|
||||||
# Define Messages |
|
||||||
# English |
|
||||||
MSG_ERRORS_NONE = Errors: none |
|
||||||
MSG_BEGIN = -------- begin -------- |
|
||||||
MSG_END = -------- end -------- |
|
||||||
MSG_SIZE_BEFORE = Size before: |
|
||||||
MSG_SIZE_AFTER = Size after: |
|
||||||
MSG_COFF = Converting to AVR COFF: |
|
||||||
MSG_FLASH = Creating load file for Flash: |
|
||||||
MSG_EEPROM = Creating load file for EEPROM: |
|
||||||
MSG_EXTENDED_LISTING = Creating Extended Listing: |
|
||||||
MSG_SYMBOL_TABLE = Creating Symbol Table: |
|
||||||
MSG_LINKING = Linking: |
|
||||||
MSG_COMPILING = Compiling C: |
|
||||||
MSG_COMPILING_CPP = Compiling C++: |
|
||||||
MSG_ASSEMBLING = Assembling: |
|
||||||
MSG_CLEANING = Cleaning project: |
|
||||||
MSG_CREATING_LIBRARY = Creating library: |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Define all object files. |
|
||||||
OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) |
|
||||||
|
|
||||||
# Define all listing files. |
|
||||||
LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) |
|
||||||
|
|
||||||
|
|
||||||
# Compiler flags to generate dependency files. |
|
||||||
#GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d |
|
||||||
|
|
||||||
|
|
||||||
# Combine all necessary flags and optional flags. |
|
||||||
# Add target processor to flags. |
|
||||||
ALL_CFLAGS = -mpart=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS) |
|
||||||
ALL_CPPFLAGS = -mpart=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS) |
|
||||||
ALL_ASFLAGS = -mpart=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Default target. |
|
||||||
all: begin gccversion sizebefore build sizeafter end |
|
||||||
|
|
||||||
# Change the build target to build a HEX file or a library. |
|
||||||
build: elf hex lss sym |
|
||||||
#build: lib |
|
||||||
|
|
||||||
|
|
||||||
elf: $(TARGET).elf |
|
||||||
hex: $(TARGET).hex |
|
||||||
lss: $(TARGET).lss |
|
||||||
sym: $(TARGET).sym |
|
||||||
LIBNAME=lib$(TARGET).a |
|
||||||
lib: $(LIBNAME) |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Eye candy. |
|
||||||
# AVR Studio 3.x does not check make's exit code but relies on |
|
||||||
# the following magic strings to be generated by the compile job. |
|
||||||
begin: |
|
||||||
@echo |
|
||||||
@echo $(MSG_BEGIN) |
|
||||||
|
|
||||||
end: |
|
||||||
@echo $(MSG_END) |
|
||||||
@echo |
|
||||||
|
|
||||||
|
|
||||||
# Display size of file. |
|
||||||
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex |
|
||||||
ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf |
|
||||||
MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) ) |
|
||||||
FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr ) |
|
||||||
|
|
||||||
|
|
||||||
sizebefore: |
|
||||||
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \ |
|
||||||
2>/dev/null; echo; fi |
|
||||||
|
|
||||||
sizeafter: |
|
||||||
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ |
|
||||||
2>/dev/null; echo; fi |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Display compiler version information. |
|
||||||
gccversion : |
|
||||||
@$(CC) --version |
|
||||||
|
|
||||||
|
|
||||||
# Program the device. |
|
||||||
flip: $(TARGET).hex |
|
||||||
batchisp -hardware usb -device $(MCU) -operation erase f |
|
||||||
batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program |
|
||||||
batchisp -hardware usb -device $(MCU) -operation start reset 0 |
|
||||||
|
|
||||||
dfu: $(TARGET).hex |
|
||||||
dfu-programmer $(MCU) erase |
|
||||||
dfu-programmer $(MCU) flash $(TARGET).hex |
|
||||||
dfu-programmer $(MCU) reset |
|
||||||
|
|
||||||
|
|
||||||
# Create final output files (.hex, .eep) from ELF output file. |
|
||||||
%.hex: %.elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_FLASH) $@ |
|
||||||
$(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature $< $@ |
|
||||||
|
|
||||||
# Create extended listing file from ELF output file. |
|
||||||
%.lss: %.elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_EXTENDED_LISTING) $@ |
|
||||||
$(OBJDUMP) -h -S -z $< > $@ |
|
||||||
|
|
||||||
# Create a symbol table from ELF output file. |
|
||||||
%.sym: %.elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_SYMBOL_TABLE) $@ |
|
||||||
$(NM) -n $< > $@ |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Create library from object files. |
|
||||||
.SECONDARY : $(TARGET).a |
|
||||||
.PRECIOUS : $(OBJ) |
|
||||||
%.a: $(OBJ) |
|
||||||
@echo |
|
||||||
@echo $(MSG_CREATING_LIBRARY) $@ |
|
||||||
$(AR) $@ $(OBJ) |
|
||||||
|
|
||||||
|
|
||||||
# Link: create ELF output file from object files. |
|
||||||
.SECONDARY : $(TARGET).elf |
|
||||||
.PRECIOUS : $(OBJ) |
|
||||||
%.elf: $(OBJ) |
|
||||||
@echo |
|
||||||
@echo $(MSG_LINKING) $@ |
|
||||||
$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS) |
|
||||||
|
|
||||||
|
|
||||||
# Compile: create object files from C source files. |
|
||||||
$(OBJDIR)/%.o : %.c |
|
||||||
@echo |
|
||||||
@echo $(MSG_COMPILING) $< |
|
||||||
$(CC) -c $(ALL_CFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Compile: create object files from C++ source files. |
|
||||||
$(OBJDIR)/%.o : %.cpp |
|
||||||
@echo |
|
||||||
@echo $(MSG_COMPILING_CPP) $< |
|
||||||
$(CC) -c $(ALL_CPPFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Compile: create assembler files from C source files. |
|
||||||
%.s : %.c |
|
||||||
$(CC) -S $(ALL_CFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Compile: create assembler files from C++ source files. |
|
||||||
%.s : %.cpp |
|
||||||
$(CC) -S $(ALL_CPPFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Assemble: create object files from assembler source files. |
|
||||||
$(OBJDIR)/%.o : %.S |
|
||||||
@echo |
|
||||||
@echo $(MSG_ASSEMBLING) $< |
|
||||||
$(CC) -c $(ALL_ASFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Create preprocessed source for use in sending a bug report. |
|
||||||
%.i : %.c |
|
||||||
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Target: clean project. |
|
||||||
clean: begin clean_list end |
|
||||||
|
|
||||||
clean_list : |
|
||||||
@echo |
|
||||||
@echo $(MSG_CLEANING) |
|
||||||
$(REMOVE) $(TARGET).hex |
|
||||||
$(REMOVE) $(TARGET).cof |
|
||||||
$(REMOVE) $(TARGET).elf |
|
||||||
$(REMOVE) $(TARGET).map |
|
||||||
$(REMOVE) $(TARGET).sym |
|
||||||
$(REMOVE) $(TARGET).lss |
|
||||||
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) |
|
||||||
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) |
|
||||||
$(REMOVE) $(SRC:.c=.s) |
|
||||||
$(REMOVE) $(SRC:.c=.d) |
|
||||||
$(REMOVE) $(SRC:.c=.i) |
|
||||||
$(REMOVEDIR) .dep |
|
||||||
|
|
||||||
doxygen: |
|
||||||
@echo Generating Project Documentation \($(TARGET)\)... |
|
||||||
@if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ |
|
||||||
exit 1; \ |
|
||||||
fi; |
|
||||||
@echo Documentation Generation Complete. |
|
||||||
|
|
||||||
clean_doxygen: |
|
||||||
rm -rf Documentation |
|
||||||
|
|
||||||
checksource: |
|
||||||
@for f in $(SRC) $(CPPSRC) $(ASRC); do \ |
|
||||||
if [ -f $$f ]; then \ |
|
||||||
echo "Found Source File: $$f" ; \ |
|
||||||
else \ |
|
||||||
echo "Source File Not Found: $$f" ; \ |
|
||||||
fi; done |
|
||||||
|
|
||||||
|
|
||||||
# Create object files directory |
|
||||||
$(shell mkdir $(OBJDIR) 2>/dev/null) |
|
||||||
|
|
||||||
|
|
||||||
# Include the dependency files. |
|
||||||
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*) |
|
||||||
|
|
||||||
|
|
||||||
# Listing of phony targets. |
|
||||||
.PHONY : all begin finish end sizebefore sizeafter gccversion \ |
|
||||||
build elf hex lss sym doxygen clean clean_list clean_doxygen \ |
|
||||||
dfu flip checksource |
|
||||||
|
|
||||||
@ -1,705 +0,0 @@ |
|||||||
# Hey Emacs, this is a -*- makefile -*- |
|
||||||
#---------------------------------------------------------------------------- |
|
||||||
# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al. |
|
||||||
# >> Modified for use with the LUFA project. << |
|
||||||
# |
|
||||||
# Released to the Public Domain |
|
||||||
# |
|
||||||
# Additional material for this makefile was written by: |
|
||||||
# Peter Fleury |
|
||||||
# Tim Henigan |
|
||||||
# Colin O'Flynn |
|
||||||
# Reiner Patommel |
|
||||||
# Markus Pfaff |
|
||||||
# Sander Pool |
|
||||||
# Frederik Rouleau |
|
||||||
# Carlos Lamas |
|
||||||
# Dean Camera |
|
||||||
# Opendous Inc. |
|
||||||
# Denver Gingerich |
|
||||||
# |
|
||||||
#---------------------------------------------------------------------------- |
|
||||||
# On command line: |
|
||||||
# |
|
||||||
# make all = Make software. |
|
||||||
# |
|
||||||
# make clean = Clean out built project files. |
|
||||||
# |
|
||||||
# make coff = Convert ELF to AVR COFF. |
|
||||||
# |
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF. |
|
||||||
# |
|
||||||
# make program = Download the hex file to the device, using avrdude. |
|
||||||
# Please customize the avrdude settings below first! |
|
||||||
# |
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must |
|
||||||
# have dfu-programmer installed). |
|
||||||
# |
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must |
|
||||||
# have Atmel FLIP installed). |
|
||||||
# |
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer |
|
||||||
# (must have dfu-programmer installed). |
|
||||||
# |
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP |
|
||||||
# (must have Atmel FLIP installed). |
|
||||||
# |
|
||||||
# make doxygen = Generate DoxyGen documentation for the project (must have |
|
||||||
# DoxyGen installed) |
|
||||||
# |
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging, |
|
||||||
# with avr-gdb or avr-insight as the front end for debugging. |
|
||||||
# |
|
||||||
# make filename.s = Just compile filename.c into the assembler code only. |
|
||||||
# |
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting |
|
||||||
# bug reports to the GCC project. |
|
||||||
# |
|
||||||
# To rebuild project do "make clean" then "make all". |
|
||||||
#---------------------------------------------------------------------------- |
|
||||||
|
|
||||||
|
|
||||||
# MCU name |
|
||||||
MCU = atxmega128a1u |
|
||||||
|
|
||||||
|
|
||||||
# Targeted chip architecture (see library "Architectures" documentation) |
|
||||||
ARCH = XMEGA |
|
||||||
|
|
||||||
|
|
||||||
# Target board (see library "Board Types" documentation, NONE for projects not requiring |
|
||||||
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called |
|
||||||
# "Board" inside the application directory. |
|
||||||
BOARD = NONE |
|
||||||
|
|
||||||
|
|
||||||
# Processor frequency. |
|
||||||
# This will define a symbol, F_CPU, in all source code files equal to the |
|
||||||
# processor frequency in Hz. You can then use this symbol in your source code to |
|
||||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done |
|
||||||
# automatically to create a 32-bit value in your source code. |
|
||||||
# |
|
||||||
# This should be the frequency the system core runs at, after the system clock |
|
||||||
# has been set up correctly and started. |
|
||||||
F_CPU = 24000000 |
|
||||||
|
|
||||||
|
|
||||||
# USB controller master clock frequency. |
|
||||||
# This will define a symbol, F_USB, in all source code files equal to the |
|
||||||
# input clock frequency of the USB controller's clock generator in Hz. |
|
||||||
# |
|
||||||
# For the XMEGA chips, this should be equal to a multiple of 6MHz for Low |
|
||||||
# Speed USB mode, or a multiple of 48MHz for Full Speed USB mode. |
|
||||||
F_USB = 48000000 |
|
||||||
|
|
||||||
|
|
||||||
# Output format. (can be srec, ihex, binary) |
|
||||||
FORMAT = ihex |
|
||||||
|
|
||||||
|
|
||||||
# Target file name (without extension). |
|
||||||
TARGET = Test |
|
||||||
|
|
||||||
|
|
||||||
# Object files directory |
|
||||||
# To put object files in current directory, use a dot (.), do NOT make |
|
||||||
# this an empty or blank macro! |
|
||||||
OBJDIR = . |
|
||||||
|
|
||||||
|
|
||||||
# Path to the LUFA library |
|
||||||
LUFA_PATH = ../.. |
|
||||||
|
|
||||||
|
|
||||||
# LUFA library compile-time options and predefined tokens |
|
||||||
LUFA_OPTS = |
|
||||||
|
|
||||||
|
|
||||||
# Create the LUFA source path variables by including the LUFA root makefile |
|
||||||
include $(LUFA_PATH)/LUFA/makefile |
|
||||||
|
|
||||||
|
|
||||||
# List C source files here. (C dependencies are automatically generated.) |
|
||||||
SRC = Test.c |
|
||||||
|
|
||||||
|
|
||||||
# List C++ source files here. (C dependencies are automatically generated.) |
|
||||||
CPPSRC = |
|
||||||
|
|
||||||
|
|
||||||
# List Assembler source files here. |
|
||||||
# Make them always end in a capital .S. Files ending in a lowercase .s |
|
||||||
# will not be considered source files but generated files (assembler |
|
||||||
# output from the compiler), and will be deleted upon "make clean"! |
|
||||||
# Even though the DOS/Win* filesystem matches both .s and .S the same, |
|
||||||
# it will preserve the spelling of the filenames, and gcc itself does |
|
||||||
# care about how the name is spelled on its command-line. |
|
||||||
ASRC = |
|
||||||
|
|
||||||
|
|
||||||
# Optimization level, can be [0, 1, 2, 3, s]. |
|
||||||
# 0 = turn off optimization. s = optimize for size. |
|
||||||
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) |
|
||||||
OPT = 1 |
|
||||||
|
|
||||||
|
|
||||||
# List any extra directories to look for include files here. |
|
||||||
# Each directory must be seperated by a space. |
|
||||||
# Use forward slashes for directory separators. |
|
||||||
# For a directory that has spaces, enclose it in quotes. |
|
||||||
EXTRAINCDIRS = $(LUFA_PATH)/ |
|
||||||
|
|
||||||
|
|
||||||
# Compiler flag to set the C Standard level. |
|
||||||
# c89 = "ANSI" C |
|
||||||
# gnu89 = c89 plus GCC extensions |
|
||||||
# c99 = ISO C99 standard (not yet fully implemented) |
|
||||||
# gnu99 = c99 plus GCC extensions |
|
||||||
CSTANDARD = -std=gnu99 |
|
||||||
|
|
||||||
|
|
||||||
# Place -D or -U options here for C sources |
|
||||||
CDEFS = -DF_CPU=$(F_CPU)UL |
|
||||||
CDEFS += -DF_USB=$(F_USB)UL |
|
||||||
CDEFS += -DBOARD=BOARD_$(BOARD) |
|
||||||
CDEFS += -DARCH=ARCH_$(ARCH) |
|
||||||
CDEFS += $(LUFA_OPTS) |
|
||||||
|
|
||||||
|
|
||||||
# Place -D or -U options here for ASM sources |
|
||||||
ADEFS = -DF_CPU=$(F_CPU) |
|
||||||
ADEFS += -DF_USB=$(F_USB)UL |
|
||||||
ADEFS += -DBOARD=BOARD_$(BOARD) |
|
||||||
ADEFS += -DARCH=ARCH_$(ARCH) |
|
||||||
ADEFS += $(LUFA_OPTS) |
|
||||||
|
|
||||||
# Place -D or -U options here for C++ sources |
|
||||||
CPPDEFS = -DF_CPU=$(F_CPU)UL |
|
||||||
CPPDEFS += -DF_USB=$(F_USB)UL |
|
||||||
CPPDEFS += -DBOARD=BOARD_$(BOARD) |
|
||||||
CPPDEFS += -DARCH=ARCH_$(ARCH) |
|
||||||
CPPDEFS += $(LUFA_OPTS) |
|
||||||
|
|
||||||
|
|
||||||
# Debugging format. |
|
||||||
# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs. |
|
||||||
# AVR Studio 4.10 requires dwarf-2. |
|
||||||
# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run. |
|
||||||
DEBUG = dwarf-2 |
|
||||||
|
|
||||||
|
|
||||||
#---------------- Compiler Options C ---------------- |
|
||||||
# -g*: generate debugging information |
|
||||||
# -O*: optimization level |
|
||||||
# -f...: tuning, see GCC manual and avr-libc documentation |
|
||||||
# -Wall...: warning level |
|
||||||
# -Wa,...: tell GCC to pass this to the assembler. |
|
||||||
# -adhlns...: create assembler listing |
|
||||||
CFLAGS = -g$(DEBUG) |
|
||||||
CFLAGS += $(CDEFS) |
|
||||||
CFLAGS += -O$(OPT) |
|
||||||
CFLAGS += -funsigned-char |
|
||||||
CFLAGS += -funsigned-bitfields |
|
||||||
CFLAGS += -ffunction-sections |
|
||||||
CFLAGS += -fno-inline-small-functions |
|
||||||
CFLAGS += -fpack-struct |
|
||||||
CFLAGS += -fshort-enums |
|
||||||
CFLAGS += -fno-strict-aliasing |
|
||||||
CFLAGS += -Wall |
|
||||||
CFLAGS += -Wstrict-prototypes |
|
||||||
#CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) |
|
||||||
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) |
|
||||||
CFLAGS += $(CSTANDARD) |
|
||||||
|
|
||||||
|
|
||||||
#---------------- Compiler Options C++ ---------------- |
|
||||||
# -g*: generate debugging information |
|
||||||
# -O*: optimization level |
|
||||||
# -f...: tuning, see GCC manual and avr-libc documentation |
|
||||||
# -Wall...: warning level |
|
||||||
# -Wa,...: tell GCC to pass this to the assembler. |
|
||||||
# -adhlns...: create assembler listing |
|
||||||
CPPFLAGS = -g$(DEBUG) |
|
||||||
CPPFLAGS += $(CPPDEFS) |
|
||||||
CPPFLAGS += -O$(OPT) |
|
||||||
CPPFLAGS += -funsigned-char |
|
||||||
CPPFLAGS += -funsigned-bitfields |
|
||||||
CPPFLAGS += -fpack-struct |
|
||||||
CPPFLAGS += -fshort-enums |
|
||||||
CPPFLAGS += -ffunction-sections |
|
||||||
CPPFLAGS += -fno-strict-aliasing |
|
||||||
CPPFLAGS += -fno-exceptions |
|
||||||
CPPFLAGS += -Wall |
|
||||||
CPPFLAGS += -Wundef |
|
||||||
#CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) |
|
||||||
CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) |
|
||||||
#CPPFLAGS += $(CSTANDARD) |
|
||||||
|
|
||||||
|
|
||||||
#---------------- Assembler Options ---------------- |
|
||||||
# -Wa,...: tell GCC to pass this to the assembler. |
|
||||||
# -adhlns: create listing |
|
||||||
# -gstabs: have the assembler create line number information; note that |
|
||||||
# for use in COFF files, additional information about filenames |
|
||||||
# and function names needs to be present in the assembler source |
|
||||||
# files -- see avr-libc docs [FIXME: not yet described there] |
|
||||||
# -listing-cont-lines: Sets the maximum number of continuation lines of hex |
|
||||||
# dump that will be displayed for a given single line of source input. |
|
||||||
ASFLAGS = $(ADEFS) |
|
||||||
#ASFLAGS += -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 |
|
||||||
|
|
||||||
|
|
||||||
#---------------- Library Options ---------------- |
|
||||||
# Minimalistic printf version |
|
||||||
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min |
|
||||||
|
|
||||||
# Floating point printf version (requires MATH_LIB = -lm below) |
|
||||||
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt |
|
||||||
|
|
||||||
# If this is left blank, then it will use the Standard printf version. |
|
||||||
PRINTF_LIB = |
|
||||||
#PRINTF_LIB = $(PRINTF_LIB_MIN) |
|
||||||
#PRINTF_LIB = $(PRINTF_LIB_FLOAT) |
|
||||||
|
|
||||||
|
|
||||||
# Minimalistic scanf version |
|
||||||
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min |
|
||||||
|
|
||||||
# Floating point + %[ scanf version (requires MATH_LIB = -lm below) |
|
||||||
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt |
|
||||||
|
|
||||||
# If this is left blank, then it will use the Standard scanf version. |
|
||||||
SCANF_LIB = |
|
||||||
#SCANF_LIB = $(SCANF_LIB_MIN) |
|
||||||
#SCANF_LIB = $(SCANF_LIB_FLOAT) |
|
||||||
|
|
||||||
|
|
||||||
MATH_LIB = -lm |
|
||||||
|
|
||||||
|
|
||||||
# List any extra directories to look for libraries here. |
|
||||||
# Each directory must be seperated by a space. |
|
||||||
# Use forward slashes for directory separators. |
|
||||||
# For a directory that has spaces, enclose it in quotes. |
|
||||||
EXTRALIBDIRS = |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#---------------- External Memory Options ---------------- |
|
||||||
|
|
||||||
# 64 KB of external RAM, starting after internal RAM (ATmega128!), |
|
||||||
# used for variables (.data/.bss) and heap (malloc()). |
|
||||||
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff |
|
||||||
|
|
||||||
# 64 KB of external RAM, starting after internal RAM (ATmega128!), |
|
||||||
# only used for heap (malloc()). |
|
||||||
#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff |
|
||||||
|
|
||||||
EXTMEMOPTS = |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#---------------- Linker Options ---------------- |
|
||||||
# -Wl,...: tell GCC to pass this to linker. |
|
||||||
# -Map: create map file |
|
||||||
# --cref: add cross reference to map file |
|
||||||
#LDFLAGS = -Wl,-Map=$(TARGET).map,--cref |
|
||||||
LDFLAGS += -Wl,--relax |
|
||||||
LDFLAGS += -Wl,--gc-sections |
|
||||||
LDFLAGS += $(EXTMEMOPTS) |
|
||||||
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) |
|
||||||
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB) |
|
||||||
#LDFLAGS += -T linker_script.x |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#---------------- Programming Options (avrdude) ---------------- |
|
||||||
|
|
||||||
# Programming hardware |
|
||||||
# Type: avrdude -c ? |
|
||||||
# to get a full listing. |
|
||||||
# |
|
||||||
AVRDUDE_PROGRAMMER = jtagmkII |
|
||||||
|
|
||||||
# com1 = serial port. Use lpt1 to connect to parallel port. |
|
||||||
AVRDUDE_PORT = usb |
|
||||||
|
|
||||||
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex |
|
||||||
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep |
|
||||||
|
|
||||||
|
|
||||||
# Uncomment the following if you want avrdude's erase cycle counter. |
|
||||||
# Note that this counter needs to be initialized first using -Yn, |
|
||||||
# see avrdude manual. |
|
||||||
#AVRDUDE_ERASE_COUNTER = -y |
|
||||||
|
|
||||||
# Uncomment the following if you do /not/ wish a verification to be |
|
||||||
# performed after programming the device. |
|
||||||
#AVRDUDE_NO_VERIFY = -V |
|
||||||
|
|
||||||
# Increase verbosity level. Please use this when submitting bug |
|
||||||
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> |
|
||||||
# to submit bug reports. |
|
||||||
#AVRDUDE_VERBOSE = -v -v |
|
||||||
|
|
||||||
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) |
|
||||||
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY) |
|
||||||
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE) |
|
||||||
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER) |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#---------------- Debugging Options ---------------- |
|
||||||
|
|
||||||
# For simulavr only - target MCU frequency. |
|
||||||
DEBUG_MFREQ = $(F_CPU) |
|
||||||
|
|
||||||
# Set the DEBUG_UI to either gdb or insight. |
|
||||||
# DEBUG_UI = gdb |
|
||||||
DEBUG_UI = insight |
|
||||||
|
|
||||||
# Set the debugging back-end to either avarice, simulavr. |
|
||||||
DEBUG_BACKEND = avarice |
|
||||||
#DEBUG_BACKEND = simulavr |
|
||||||
|
|
||||||
# GDB Init Filename. |
|
||||||
GDBINIT_FILE = __avr_gdbinit |
|
||||||
|
|
||||||
# When using avarice settings for the JTAG |
|
||||||
JTAG_DEV = /dev/com1 |
|
||||||
|
|
||||||
# Debugging port used to communicate between GDB / avarice / simulavr. |
|
||||||
DEBUG_PORT = 4242 |
|
||||||
|
|
||||||
# Debugging host used to communicate between GDB / avarice / simulavr, normally |
|
||||||
# just set to localhost unless doing some sort of crazy debugging when |
|
||||||
# avarice is running on a different computer. |
|
||||||
DEBUG_HOST = localhost |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#============================================================================ |
|
||||||
|
|
||||||
|
|
||||||
# Define programs and commands. |
|
||||||
SHELL = sh |
|
||||||
CC = avr-gcc |
|
||||||
OBJCOPY = avr-objcopy |
|
||||||
OBJDUMP = avr-objdump |
|
||||||
SIZE = avr-size |
|
||||||
AR = avr-ar rcs |
|
||||||
NM = avr-nm |
|
||||||
AVRDUDE = avrdude |
|
||||||
REMOVE = rm -f |
|
||||||
REMOVEDIR = rm -rf |
|
||||||
COPY = cp |
|
||||||
WINSHELL = cmd |
|
||||||
|
|
||||||
|
|
||||||
# Define Messages |
|
||||||
# English |
|
||||||
MSG_ERRORS_NONE = Errors: none |
|
||||||
MSG_BEGIN = -------- begin -------- |
|
||||||
MSG_END = -------- end -------- |
|
||||||
MSG_SIZE_BEFORE = Size before: |
|
||||||
MSG_SIZE_AFTER = Size after: |
|
||||||
MSG_COFF = Converting to AVR COFF: |
|
||||||
MSG_EXTENDED_COFF = Converting to AVR Extended COFF: |
|
||||||
MSG_FLASH = Creating load file for Flash: |
|
||||||
MSG_EEPROM = Creating load file for EEPROM: |
|
||||||
MSG_EXTENDED_LISTING = Creating Extended Listing: |
|
||||||
MSG_SYMBOL_TABLE = Creating Symbol Table: |
|
||||||
MSG_LINKING = Linking: |
|
||||||
MSG_COMPILING = Compiling C: |
|
||||||
MSG_COMPILING_CPP = Compiling C++: |
|
||||||
MSG_ASSEMBLING = Assembling: |
|
||||||
MSG_CLEANING = Cleaning project: |
|
||||||
MSG_CREATING_LIBRARY = Creating library: |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Define all object files. |
|
||||||
OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) |
|
||||||
|
|
||||||
# Define all listing files. |
|
||||||
LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) |
|
||||||
|
|
||||||
|
|
||||||
# Compiler flags to generate dependency files. |
|
||||||
#GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d |
|
||||||
|
|
||||||
|
|
||||||
# Combine all necessary flags and optional flags. |
|
||||||
# Add target processor to flags. |
|
||||||
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS) |
|
||||||
ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS) |
|
||||||
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Default target. |
|
||||||
all: begin gccversion sizebefore build sizeafter end |
|
||||||
|
|
||||||
# Change the build target to build a HEX file or a library. |
|
||||||
build: elf hex eep lss sym |
|
||||||
#build: lib |
|
||||||
|
|
||||||
|
|
||||||
elf: $(TARGET).elf |
|
||||||
hex: $(TARGET).hex |
|
||||||
eep: $(TARGET).eep |
|
||||||
lss: $(TARGET).lss |
|
||||||
sym: $(TARGET).sym |
|
||||||
LIBNAME=lib$(TARGET).a |
|
||||||
lib: $(LIBNAME) |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Eye candy. |
|
||||||
# AVR Studio 3.x does not check make's exit code but relies on |
|
||||||
# the following magic strings to be generated by the compile job. |
|
||||||
begin: |
|
||||||
@echo |
|
||||||
@echo $(MSG_BEGIN) |
|
||||||
|
|
||||||
end: |
|
||||||
@echo $(MSG_END) |
|
||||||
@echo |
|
||||||
|
|
||||||
|
|
||||||
# Display size of file. |
|
||||||
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex |
|
||||||
ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf |
|
||||||
MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) ) |
|
||||||
FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr ) |
|
||||||
|
|
||||||
|
|
||||||
sizebefore: |
|
||||||
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \ |
|
||||||
2>/dev/null; echo; fi |
|
||||||
|
|
||||||
sizeafter: |
|
||||||
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ |
|
||||||
2>/dev/null; echo; fi |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Display compiler version information. |
|
||||||
gccversion : |
|
||||||
@$(CC) --version |
|
||||||
|
|
||||||
|
|
||||||
# Program the device. |
|
||||||
program: $(TARGET).hex $(TARGET).eep |
|
||||||
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) |
|
||||||
|
|
||||||
flip: $(TARGET).hex |
|
||||||
batchisp -hardware usb -device $(MCU) -operation erase f |
|
||||||
batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program |
|
||||||
batchisp -hardware usb -device $(MCU) -operation start reset 0 |
|
||||||
|
|
||||||
dfu: $(TARGET).hex |
|
||||||
dfu-programmer $(MCU) erase |
|
||||||
dfu-programmer $(MCU) flash $(TARGET).hex |
|
||||||
dfu-programmer $(MCU) reset |
|
||||||
|
|
||||||
flip-ee: $(TARGET).hex $(TARGET).eep |
|
||||||
$(COPY) $(TARGET).eep $(TARGET)eep.hex |
|
||||||
batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase |
|
||||||
batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program |
|
||||||
batchisp -hardware usb -device $(MCU) -operation start reset 0 |
|
||||||
$(REMOVE) $(TARGET)eep.hex |
|
||||||
|
|
||||||
dfu-ee: $(TARGET).hex $(TARGET).eep |
|
||||||
dfu-programmer $(MCU) eeprom-flash $(TARGET).eep |
|
||||||
dfu-programmer $(MCU) reset |
|
||||||
|
|
||||||
|
|
||||||
# Generate avr-gdb config/init file which does the following: |
|
||||||
# define the reset signal, load the target file, connect to target, and set |
|
||||||
# a breakpoint at main(). |
|
||||||
gdb-config: |
|
||||||
@$(REMOVE) $(GDBINIT_FILE) |
|
||||||
@echo define reset >> $(GDBINIT_FILE) |
|
||||||
@echo SIGNAL SIGHUP >> $(GDBINIT_FILE) |
|
||||||
@echo end >> $(GDBINIT_FILE) |
|
||||||
@echo file $(TARGET).elf >> $(GDBINIT_FILE) |
|
||||||
@echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE) |
|
||||||
ifeq ($(DEBUG_BACKEND),simulavr) |
|
||||||
@echo load >> $(GDBINIT_FILE) |
|
||||||
endif |
|
||||||
@echo break main >> $(GDBINIT_FILE) |
|
||||||
|
|
||||||
debug: gdb-config $(TARGET).elf |
|
||||||
ifeq ($(DEBUG_BACKEND), avarice) |
|
||||||
@echo Starting AVaRICE - Press enter when "waiting to connect" message displays. |
|
||||||
@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \ |
|
||||||
$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT) |
|
||||||
@$(WINSHELL) /c pause |
|
||||||
|
|
||||||
else |
|
||||||
@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \ |
|
||||||
$(DEBUG_MFREQ) --port $(DEBUG_PORT) |
|
||||||
endif |
|
||||||
@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE) |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. |
|
||||||
COFFCONVERT = $(OBJCOPY) --debugging |
|
||||||
COFFCONVERT += --change-section-address .data-0x800000 |
|
||||||
COFFCONVERT += --change-section-address .bss-0x800000 |
|
||||||
COFFCONVERT += --change-section-address .noinit-0x800000 |
|
||||||
COFFCONVERT += --change-section-address .eeprom-0x810000 |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
coff: $(TARGET).elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_COFF) $(TARGET).cof |
|
||||||
$(COFFCONVERT) -O coff-avr $< $(TARGET).cof |
|
||||||
|
|
||||||
|
|
||||||
extcoff: $(TARGET).elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_EXTENDED_COFF) $(TARGET).cof |
|
||||||
$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Create final output files (.hex, .eep) from ELF output file. |
|
||||||
%.hex: %.elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_FLASH) $@ |
|
||||||
$(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature $< $@ |
|
||||||
|
|
||||||
%.eep: %.elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_EEPROM) $@ |
|
||||||
-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ |
|
||||||
--change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0 |
|
||||||
|
|
||||||
# Create extended listing file from ELF output file. |
|
||||||
%.lss: %.elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_EXTENDED_LISTING) $@ |
|
||||||
$(OBJDUMP) -h -S -z $< > $@ |
|
||||||
|
|
||||||
# Create a symbol table from ELF output file. |
|
||||||
%.sym: %.elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_SYMBOL_TABLE) $@ |
|
||||||
$(NM) -n $< > $@ |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Create library from object files. |
|
||||||
.SECONDARY : $(TARGET).a |
|
||||||
.PRECIOUS : $(OBJ) |
|
||||||
%.a: $(OBJ) |
|
||||||
@echo |
|
||||||
@echo $(MSG_CREATING_LIBRARY) $@ |
|
||||||
$(AR) $@ $(OBJ) |
|
||||||
|
|
||||||
|
|
||||||
# Link: create ELF output file from object files. |
|
||||||
.SECONDARY : $(TARGET).elf |
|
||||||
.PRECIOUS : $(OBJ) |
|
||||||
%.elf: $(OBJ) |
|
||||||
@echo |
|
||||||
@echo $(MSG_LINKING) $@ |
|
||||||
$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS) |
|
||||||
|
|
||||||
|
|
||||||
# Compile: create object files from C source files. |
|
||||||
$(OBJDIR)/%.o : %.c |
|
||||||
@echo |
|
||||||
@echo $(MSG_COMPILING) $< |
|
||||||
$(CC) -c $(ALL_CFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Compile: create object files from C++ source files. |
|
||||||
$(OBJDIR)/%.o : %.cpp |
|
||||||
@echo |
|
||||||
@echo $(MSG_COMPILING_CPP) $< |
|
||||||
$(CC) -c $(ALL_CPPFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Compile: create assembler files from C source files. |
|
||||||
%.s : %.c |
|
||||||
$(CC) -S $(ALL_CFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Compile: create assembler files from C++ source files. |
|
||||||
%.s : %.cpp |
|
||||||
$(CC) -S $(ALL_CPPFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Assemble: create object files from assembler source files. |
|
||||||
$(OBJDIR)/%.o : %.S |
|
||||||
@echo |
|
||||||
@echo $(MSG_ASSEMBLING) $< |
|
||||||
$(CC) -c $(ALL_ASFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Create preprocessed source for use in sending a bug report. |
|
||||||
%.i : %.c |
|
||||||
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Target: clean project. |
|
||||||
clean: begin clean_list end |
|
||||||
|
|
||||||
clean_list : |
|
||||||
@echo |
|
||||||
@echo $(MSG_CLEANING) |
|
||||||
$(REMOVE) $(TARGET).hex |
|
||||||
$(REMOVE) $(TARGET).eep |
|
||||||
$(REMOVE) $(TARGET).cof |
|
||||||
$(REMOVE) $(TARGET).elf |
|
||||||
$(REMOVE) $(TARGET).map |
|
||||||
$(REMOVE) $(TARGET).sym |
|
||||||
$(REMOVE) $(TARGET).lss |
|
||||||
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) |
|
||||||
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) |
|
||||||
$(REMOVE) $(SRC:.c=.s) |
|
||||||
$(REMOVE) $(SRC:.c=.d) |
|
||||||
$(REMOVE) $(SRC:.c=.i) |
|
||||||
$(REMOVEDIR) .dep |
|
||||||
|
|
||||||
doxygen: |
|
||||||
@echo Generating Project Documentation \($(TARGET)\)... |
|
||||||
@if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ |
|
||||||
exit 1; \ |
|
||||||
fi; |
|
||||||
@echo Documentation Generation Complete. |
|
||||||
|
|
||||||
clean_doxygen: |
|
||||||
rm -rf Documentation |
|
||||||
|
|
||||||
checksource: |
|
||||||
@for f in $(SRC) $(CPPSRC) $(ASRC); do \ |
|
||||||
if [ -f $$f ]; then \ |
|
||||||
echo "Found Source File: $$f" ; \ |
|
||||||
else \ |
|
||||||
echo "Source File Not Found: $$f" ; \ |
|
||||||
fi; done |
|
||||||
|
|
||||||
|
|
||||||
# Create object files directory |
|
||||||
$(shell mkdir $(OBJDIR) 2>/dev/null) |
|
||||||
|
|
||||||
|
|
||||||
# Include the dependency files. |
|
||||||
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*) |
|
||||||
|
|
||||||
|
|
||||||
# Listing of phony targets. |
|
||||||
.PHONY : all begin finish end sizebefore sizeafter gccversion \ |
|
||||||
build elf hex eep lss sym coff extcoff doxygen clean \ |
|
||||||
clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ |
|
||||||
debug gdb-config checksource |
|
||||||
@ -1,742 +0,0 @@ |
|||||||
# Hey Emacs, this is a -*- makefile -*- |
|
||||||
#---------------------------------------------------------------------------- |
|
||||||
# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al. |
|
||||||
# >> Modified for use with the LUFA project. << |
|
||||||
# |
|
||||||
# Released to the Public Domain |
|
||||||
# |
|
||||||
# Additional material for this makefile was written by: |
|
||||||
# Peter Fleury |
|
||||||
# Tim Henigan |
|
||||||
# Colin O'Flynn |
|
||||||
# Reiner Patommel |
|
||||||
# Markus Pfaff |
|
||||||
# Sander Pool |
|
||||||
# Frederik Rouleau |
|
||||||
# Carlos Lamas |
|
||||||
# Dean Camera |
|
||||||
# Opendous Inc. |
|
||||||
# Denver Gingerich |
|
||||||
# |
|
||||||
#---------------------------------------------------------------------------- |
|
||||||
# On command line: |
|
||||||
# |
|
||||||
# make all = Make software. |
|
||||||
# |
|
||||||
# make clean = Clean out built project files. |
|
||||||
# |
|
||||||
# make coff = Convert ELF to AVR COFF. |
|
||||||
# |
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF. |
|
||||||
# |
|
||||||
# make program = Download the hex file to the device, using avrdude. |
|
||||||
# Please customize the avrdude settings below first! |
|
||||||
# |
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must |
|
||||||
# have dfu-programmer installed). |
|
||||||
# |
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must |
|
||||||
# have Atmel FLIP installed). |
|
||||||
# |
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer |
|
||||||
# (must have dfu-programmer installed). |
|
||||||
# |
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP |
|
||||||
# (must have Atmel FLIP installed). |
|
||||||
# |
|
||||||
# make doxygen = Generate DoxyGen documentation for the project (must have |
|
||||||
# DoxyGen installed) |
|
||||||
# |
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging, |
|
||||||
# with avr-gdb or avr-insight as the front end for debugging. |
|
||||||
# |
|
||||||
# make filename.s = Just compile filename.c into the assembler code only. |
|
||||||
# |
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting |
|
||||||
# bug reports to the GCC project. |
|
||||||
# |
|
||||||
# To rebuild project do "make clean" then "make all". |
|
||||||
#---------------------------------------------------------------------------- |
|
||||||
|
|
||||||
|
|
||||||
# MCU name |
|
||||||
MCU = at90usb1287 |
|
||||||
|
|
||||||
|
|
||||||
# Target architecture (see library "Board Types" documentation). |
|
||||||
ARCH = AVR8 |
|
||||||
|
|
||||||
|
|
||||||
# Target board (see library "Board Types" documentation, NONE for projects not requiring |
|
||||||
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called |
|
||||||
# "Board" inside the application directory. |
|
||||||
BOARD = NONE |
|
||||||
|
|
||||||
|
|
||||||
# Processor frequency. |
|
||||||
# This will define a symbol, F_CPU, in all source code files equal to the |
|
||||||
# processor frequency in Hz. You can then use this symbol in your source code to |
|
||||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done |
|
||||||
# automatically to create a 32-bit value in your source code. |
|
||||||
# |
|
||||||
# This will be an integer division of F_USB below, as it is sourced by |
|
||||||
# F_USB after it has run through any CPU prescalers. Note that this value |
|
||||||
# does not *change* the processor frequency - it should merely be updated to |
|
||||||
# reflect the processor speed set externally so that the code can use accurate |
|
||||||
# software delays. |
|
||||||
F_CPU = 16000000 |
|
||||||
|
|
||||||
|
|
||||||
# Input clock frequency. |
|
||||||
# This will define a symbol, F_USB, in all source code files equal to the |
|
||||||
# input clock frequency (before any prescaling is performed) in Hz. This value may |
|
||||||
# differ from F_CPU if prescaling is used on the latter, and is required as the |
|
||||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed |
|
||||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' |
|
||||||
# at the end, this will be done automatically to create a 32-bit value in your |
|
||||||
# source code. |
|
||||||
# |
|
||||||
# If no clock division is performed on the input clock inside the AVR (via the |
|
||||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. |
|
||||||
F_USB = $(F_CPU) |
|
||||||
|
|
||||||
|
|
||||||
# Output format. (can be srec, ihex, binary) |
|
||||||
FORMAT = ihex |
|
||||||
|
|
||||||
|
|
||||||
# Target file name (without extension). |
|
||||||
TARGET = Test |
|
||||||
|
|
||||||
|
|
||||||
# Object files directory |
|
||||||
# To put object files in current directory, use a dot (.), do NOT make |
|
||||||
# this an empty or blank macro! |
|
||||||
OBJDIR = . |
|
||||||
|
|
||||||
|
|
||||||
# Path to the LUFA library |
|
||||||
LUFA_PATH = ../.. |
|
||||||
|
|
||||||
|
|
||||||
# LUFA library compile-time options and predefined tokens |
|
||||||
LUFA_OPTS = |
|
||||||
|
|
||||||
|
|
||||||
# Create the LUFA source path variables by including the LUFA root makefile |
|
||||||
include $(LUFA_PATH)/LUFA/makefile |
|
||||||
|
|
||||||
|
|
||||||
# List C source files here. (C dependencies are automatically generated.) |
|
||||||
SRC = Test_C.c \ |
|
||||||
$(LUFA_SRC_USB) \ |
|
||||||
$(LUFA_SRC_USBCLASS) \ |
|
||||||
$(LUFA_SRC_TEMPERATURE) \ |
|
||||||
$(LUFA_SRC_SERIAL) \ |
|
||||||
$(LUFA_SRC_TWI) \ |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# List C++ source files here. (C dependencies are automatically generated.) |
|
||||||
CPPSRC = Test_CPP.cpp |
|
||||||
|
|
||||||
|
|
||||||
# List Assembler source files here. |
|
||||||
# Make them always end in a capital .S. Files ending in a lowercase .s |
|
||||||
# will not be considered source files but generated files (assembler |
|
||||||
# output from the compiler), and will be deleted upon "make clean"! |
|
||||||
# Even though the DOS/Win* filesystem matches both .s and .S the same, |
|
||||||
# it will preserve the spelling of the filenames, and gcc itself does |
|
||||||
# care about how the name is spelled on its command-line. |
|
||||||
ASRC = Dummy.S |
|
||||||
|
|
||||||
|
|
||||||
# Optimization level, can be [0, 1, 2, 3, s]. |
|
||||||
# 0 = turn off optimization. s = optimize for size. |
|
||||||
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) |
|
||||||
OPT = 1 |
|
||||||
|
|
||||||
|
|
||||||
# Debugging format. |
|
||||||
# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs. |
|
||||||
# AVR Studio 4.10 requires dwarf-2. |
|
||||||
# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run. |
|
||||||
DEBUG = dwarf-2 |
|
||||||
|
|
||||||
|
|
||||||
# List any extra directories to look for include files here. |
|
||||||
# Each directory must be seperated by a space. |
|
||||||
# Use forward slashes for directory separators. |
|
||||||
# For a directory that has spaces, enclose it in quotes. |
|
||||||
EXTRAINCDIRS = $(LUFA_PATH)/ |
|
||||||
|
|
||||||
|
|
||||||
# Compiler flag to set the C Standard level. |
|
||||||
# c89 = "ANSI" C |
|
||||||
# gnu89 = c89 plus GCC extensions |
|
||||||
# c99 = ISO C99 standard (not yet fully implemented) |
|
||||||
# gnu99 = c99 plus GCC extensions |
|
||||||
CSTANDARD = -std=c99 |
|
||||||
|
|
||||||
|
|
||||||
# Place -D or -U options here for C sources |
|
||||||
CDEFS = -DF_CPU=$(F_CPU)UL |
|
||||||
CDEFS += -DF_USB=$(F_USB)UL |
|
||||||
CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH) |
|
||||||
CDEFS += $(LUFA_OPTS) |
|
||||||
|
|
||||||
|
|
||||||
# Place -D or -U options here for ASM sources |
|
||||||
ADEFS = -DF_CPU=$(F_CPU) |
|
||||||
ADEFS += -DF_USB=$(F_USB)UL |
|
||||||
ADEFS += -DBOARD=BOARD_$(BOARD) |
|
||||||
ADEFS += $(LUFA_OPTS) |
|
||||||
|
|
||||||
# Place -D or -U options here for C++ sources |
|
||||||
CPPDEFS = -DF_CPU=$(F_CPU)UL |
|
||||||
CPPDEFS += -DF_USB=$(F_USB)UL |
|
||||||
CPPDEFS += -DBOARD=BOARD_$(BOARD) |
|
||||||
CPPDEFS += $(LUFA_OPTS) |
|
||||||
#CPPDEFS += -D__STDC_LIMIT_MACROS |
|
||||||
#CPPDEFS += -D__STDC_CONSTANT_MACROS |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#---------------- Compiler Options C ---------------- |
|
||||||
# -g*: generate debugging information |
|
||||||
# -O*: optimization level |
|
||||||
# -f...: tuning, see GCC manual and avr-libc documentation |
|
||||||
# -Wall...: warning level |
|
||||||
# -Wa,...: tell GCC to pass this to the assembler. |
|
||||||
# -adhlns...: create assembler listing |
|
||||||
CFLAGS = -g$(DEBUG) |
|
||||||
CFLAGS += $(CDEFS) |
|
||||||
CFLAGS += -O$(OPT) |
|
||||||
CFLAGS += -funsigned-char |
|
||||||
CFLAGS += -funsigned-bitfields |
|
||||||
CFLAGS += -ffunction-sections |
|
||||||
CFLAGS += -fno-inline-small-functions |
|
||||||
CFLAGS += -fpack-struct |
|
||||||
CFLAGS += -fshort-enums |
|
||||||
CFLAGS += -fno-strict-aliasing |
|
||||||
CFLAGS += -fno-split-wide-types |
|
||||||
#CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) |
|
||||||
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) |
|
||||||
CFLAGS += $(CSTANDARD) |
|
||||||
CFLAGS += -Werror |
|
||||||
CFLAGS += -Wall |
|
||||||
CFLAGS += -Wextra |
|
||||||
CFLAGS += -Wstrict-prototypes |
|
||||||
CFLAGS += -Wformat=2 |
|
||||||
CFLAGS += -Winit-self |
|
||||||
CFLAGS += -Wswitch-enum |
|
||||||
CFLAGS += -Wunused |
|
||||||
CFLAGS += -Wundef |
|
||||||
CFLAGS += -Wpointer-arith |
|
||||||
CFLAGS += -Wcast-align |
|
||||||
CFLAGS += -Wwrite-strings |
|
||||||
CFLAGS += -Wlogical-op |
|
||||||
CFLAGS += -Wmissing-parameter-type |
|
||||||
CFLAGS += -Wmissing-declarations |
|
||||||
CFLAGS += -Wmissing-field-initializers |
|
||||||
CFLAGS += -Wmissing-format-attribute |
|
||||||
CFLAGS += -Wredundant-decls |
|
||||||
CFLAGS += -Wnested-externs |
|
||||||
CFLAGS += -Woverlength-strings |
|
||||||
#CFLAGS += -Wswitch-default |
|
||||||
#CFLAGS += -Wc++-compat |
|
||||||
#CFLAGS += -Wcast-qual |
|
||||||
#CFLAGS += -Wconversion |
|
||||||
#CFLAGS += -Wjump-misses-init |
|
||||||
#CFLAGS += -pedantic |
|
||||||
|
|
||||||
|
|
||||||
#---------------- Compiler Options C++ ---------------- |
|
||||||
# -g*: generate debugging information |
|
||||||
# -O*: optimization level |
|
||||||
# -f...: tuning, see GCC manual and avr-libc documentation |
|
||||||
# -Wall...: warning level |
|
||||||
# -Wa,...: tell GCC to pass this to the assembler. |
|
||||||
# -adhlns...: create assembler listing |
|
||||||
CPPFLAGS = -g$(DEBUG) |
|
||||||
CPPFLAGS += $(CPPDEFS) |
|
||||||
CPPFLAGS += -O$(OPT) |
|
||||||
CPPFLAGS += -funsigned-char |
|
||||||
CPPFLAGS += -funsigned-bitfields |
|
||||||
CPPFLAGS += -fpack-struct |
|
||||||
CPPFLAGS += -fshort-enums |
|
||||||
CPPFLAGS += -fno-exceptions |
|
||||||
CPPFLAGS += -Wall |
|
||||||
CPPFLAGS += -Wundef |
|
||||||
#CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) |
|
||||||
CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) |
|
||||||
|
|
||||||
|
|
||||||
#---------------- Assembler Options ---------------- |
|
||||||
# -Wa,...: tell GCC to pass this to the assembler. |
|
||||||
# -adhlns: create listing |
|
||||||
# -gstabs: have the assembler create line number information; note that |
|
||||||
# for use in COFF files, additional information about filenames |
|
||||||
# and function names needs to be present in the assembler source |
|
||||||
# files -- see avr-libc docs [FIXME: not yet described there] |
|
||||||
# -listing-cont-lines: Sets the maximum number of continuation lines of hex |
|
||||||
# dump that will be displayed for a given single line of source input. |
|
||||||
ASFLAGS = $(ADEFS) |
|
||||||
#ASFLAGS += -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 |
|
||||||
|
|
||||||
|
|
||||||
#---------------- Library Options ---------------- |
|
||||||
# Minimalistic printf version |
|
||||||
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min |
|
||||||
|
|
||||||
# Floating point printf version (requires MATH_LIB = -lm below) |
|
||||||
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt |
|
||||||
|
|
||||||
# If this is left blank, then it will use the Standard printf version. |
|
||||||
PRINTF_LIB = |
|
||||||
#PRINTF_LIB = $(PRINTF_LIB_MIN) |
|
||||||
#PRINTF_LIB = $(PRINTF_LIB_FLOAT) |
|
||||||
|
|
||||||
|
|
||||||
# Minimalistic scanf version |
|
||||||
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min |
|
||||||
|
|
||||||
# Floating point + %[ scanf version (requires MATH_LIB = -lm below) |
|
||||||
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt |
|
||||||
|
|
||||||
# If this is left blank, then it will use the Standard scanf version. |
|
||||||
SCANF_LIB = |
|
||||||
#SCANF_LIB = $(SCANF_LIB_MIN) |
|
||||||
#SCANF_LIB = $(SCANF_LIB_FLOAT) |
|
||||||
|
|
||||||
|
|
||||||
MATH_LIB = -lm |
|
||||||
|
|
||||||
|
|
||||||
# List any extra directories to look for libraries here. |
|
||||||
# Each directory must be seperated by a space. |
|
||||||
# Use forward slashes for directory separators. |
|
||||||
# For a directory that has spaces, enclose it in quotes. |
|
||||||
EXTRALIBDIRS = |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#---------------- External Memory Options ---------------- |
|
||||||
|
|
||||||
# 64 KB of external RAM, starting after internal RAM (ATmega128!), |
|
||||||
# used for variables (.data/.bss) and heap (malloc()). |
|
||||||
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff |
|
||||||
|
|
||||||
# 64 KB of external RAM, starting after internal RAM (ATmega128!), |
|
||||||
# only used for heap (malloc()). |
|
||||||
#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff |
|
||||||
|
|
||||||
EXTMEMOPTS = |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#---------------- Linker Options ---------------- |
|
||||||
# -Wl,...: tell GCC to pass this to linker. |
|
||||||
# -Map: create map file |
|
||||||
# --cref: add cross reference to map file |
|
||||||
#LDFLAGS = -Wl,-Map=$(TARGET).map,--cref |
|
||||||
LDFLAGS += -Wl,--relax |
|
||||||
LDFLAGS += -Wl,--gc-sections |
|
||||||
LDFLAGS += $(EXTMEMOPTS) |
|
||||||
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) |
|
||||||
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB) |
|
||||||
#LDFLAGS += -T linker_script.x |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#---------------- Programming Options (avrdude) ---------------- |
|
||||||
|
|
||||||
# Programming hardware |
|
||||||
# Type: avrdude -c ? |
|
||||||
# to get a full listing. |
|
||||||
# |
|
||||||
AVRDUDE_PROGRAMMER = jtagmkII |
|
||||||
|
|
||||||
# com1 = serial port. Use lpt1 to connect to parallel port. |
|
||||||
AVRDUDE_PORT = usb |
|
||||||
|
|
||||||
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex |
|
||||||
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep |
|
||||||
|
|
||||||
|
|
||||||
# Uncomment the following if you want avrdude's erase cycle counter. |
|
||||||
# Note that this counter needs to be initialized first using -Yn, |
|
||||||
# see avrdude manual. |
|
||||||
#AVRDUDE_ERASE_COUNTER = -y |
|
||||||
|
|
||||||
# Uncomment the following if you do /not/ wish a verification to be |
|
||||||
# performed after programming the device. |
|
||||||
#AVRDUDE_NO_VERIFY = -V |
|
||||||
|
|
||||||
# Increase verbosity level. Please use this when submitting bug |
|
||||||
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> |
|
||||||
# to submit bug reports. |
|
||||||
#AVRDUDE_VERBOSE = -v -v |
|
||||||
|
|
||||||
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) |
|
||||||
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY) |
|
||||||
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE) |
|
||||||
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER) |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#---------------- Debugging Options ---------------- |
|
||||||
|
|
||||||
# For simulavr only - target MCU frequency. |
|
||||||
DEBUG_MFREQ = $(F_CPU) |
|
||||||
|
|
||||||
# Set the DEBUG_UI to either gdb or insight. |
|
||||||
# DEBUG_UI = gdb |
|
||||||
DEBUG_UI = insight |
|
||||||
|
|
||||||
# Set the debugging back-end to either avarice, simulavr. |
|
||||||
DEBUG_BACKEND = avarice |
|
||||||
#DEBUG_BACKEND = simulavr |
|
||||||
|
|
||||||
# GDB Init Filename. |
|
||||||
GDBINIT_FILE = __avr_gdbinit |
|
||||||
|
|
||||||
# When using avarice settings for the JTAG |
|
||||||
JTAG_DEV = /dev/com1 |
|
||||||
|
|
||||||
# Debugging port used to communicate between GDB / avarice / simulavr. |
|
||||||
DEBUG_PORT = 4242 |
|
||||||
|
|
||||||
# Debugging host used to communicate between GDB / avarice / simulavr, normally |
|
||||||
# just set to localhost unless doing some sort of crazy debugging when |
|
||||||
# avarice is running on a different computer. |
|
||||||
DEBUG_HOST = localhost |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#============================================================================ |
|
||||||
|
|
||||||
|
|
||||||
# Define programs and commands. |
|
||||||
SHELL = sh |
|
||||||
CC = avr-gcc |
|
||||||
OBJCOPY = avr-objcopy |
|
||||||
OBJDUMP = avr-objdump |
|
||||||
SIZE = avr-size |
|
||||||
AR = avr-ar rcs |
|
||||||
NM = avr-nm |
|
||||||
AVRDUDE = avrdude |
|
||||||
REMOVE = rm -f |
|
||||||
REMOVEDIR = rm -rf |
|
||||||
COPY = cp |
|
||||||
WINSHELL = cmd |
|
||||||
|
|
||||||
|
|
||||||
# Define Messages |
|
||||||
# English |
|
||||||
MSG_ERRORS_NONE = Errors: none |
|
||||||
MSG_BEGIN = -------- begin -------- |
|
||||||
MSG_END = -------- end -------- |
|
||||||
MSG_SIZE_BEFORE = Size before: |
|
||||||
MSG_SIZE_AFTER = Size after: |
|
||||||
MSG_COFF = Converting to AVR COFF: |
|
||||||
MSG_EXTENDED_COFF = Converting to AVR Extended COFF: |
|
||||||
MSG_FLASH = Creating load file for Flash: |
|
||||||
MSG_EEPROM = Creating load file for EEPROM: |
|
||||||
MSG_EXTENDED_LISTING = Creating Extended Listing: |
|
||||||
MSG_SYMBOL_TABLE = Creating Symbol Table: |
|
||||||
MSG_LINKING = Linking: |
|
||||||
MSG_COMPILING = Compiling C: |
|
||||||
MSG_COMPILING_CPP = Compiling C++: |
|
||||||
MSG_ASSEMBLING = Assembling: |
|
||||||
MSG_CLEANING = Cleaning project: |
|
||||||
MSG_CREATING_LIBRARY = Creating library: |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Define all object files. |
|
||||||
OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) |
|
||||||
|
|
||||||
# Define all listing files. |
|
||||||
LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) |
|
||||||
|
|
||||||
|
|
||||||
# Compiler flags to generate dependency files. |
|
||||||
#GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d |
|
||||||
|
|
||||||
|
|
||||||
# Combine all necessary flags and optional flags. |
|
||||||
# Add target processor to flags. |
|
||||||
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS) |
|
||||||
ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS) |
|
||||||
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Default target. |
|
||||||
all: begin gccversion sizebefore build sizeafter end |
|
||||||
|
|
||||||
# Change the build target to build a HEX file or a library. |
|
||||||
build: elf hex eep lss sym |
|
||||||
#build: lib |
|
||||||
|
|
||||||
|
|
||||||
elf: $(TARGET).elf |
|
||||||
hex: $(TARGET).hex |
|
||||||
eep: $(TARGET).eep |
|
||||||
lss: $(TARGET).lss |
|
||||||
sym: $(TARGET).sym |
|
||||||
LIBNAME=lib$(TARGET).a |
|
||||||
lib: $(LIBNAME) |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Eye candy. |
|
||||||
# AVR Studio 3.x does not check make's exit code but relies on |
|
||||||
# the following magic strings to be generated by the compile job. |
|
||||||
begin: |
|
||||||
@echo |
|
||||||
@echo $(MSG_BEGIN) |
|
||||||
|
|
||||||
end: |
|
||||||
@echo $(MSG_END) |
|
||||||
@echo |
|
||||||
|
|
||||||
|
|
||||||
# Display size of file. |
|
||||||
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex |
|
||||||
ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf |
|
||||||
MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) ) |
|
||||||
FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr ) |
|
||||||
|
|
||||||
|
|
||||||
sizebefore: |
|
||||||
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \ |
|
||||||
2>/dev/null; echo; fi |
|
||||||
|
|
||||||
sizeafter: |
|
||||||
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ |
|
||||||
2>/dev/null; echo; fi |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Display compiler version information. |
|
||||||
gccversion : |
|
||||||
@$(CC) --version |
|
||||||
|
|
||||||
|
|
||||||
# Program the device. |
|
||||||
program: $(TARGET).hex $(TARGET).eep |
|
||||||
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) |
|
||||||
|
|
||||||
flip: $(TARGET).hex |
|
||||||
batchisp -hardware usb -device $(MCU) -operation erase f |
|
||||||
batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program |
|
||||||
batchisp -hardware usb -device $(MCU) -operation start reset 0 |
|
||||||
|
|
||||||
dfu: $(TARGET).hex |
|
||||||
dfu-programmer $(MCU) erase |
|
||||||
dfu-programmer $(MCU) flash $(TARGET).hex |
|
||||||
dfu-programmer $(MCU) reset |
|
||||||
|
|
||||||
flip-ee: $(TARGET).hex $(TARGET).eep |
|
||||||
$(COPY) $(TARGET).eep $(TARGET)eep.hex |
|
||||||
batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase |
|
||||||
batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program |
|
||||||
batchisp -hardware usb -device $(MCU) -operation start reset 0 |
|
||||||
$(REMOVE) $(TARGET)eep.hex |
|
||||||
|
|
||||||
dfu-ee: $(TARGET).hex $(TARGET).eep |
|
||||||
dfu-programmer $(MCU) eeprom-flash $(TARGET).eep |
|
||||||
dfu-programmer $(MCU) reset |
|
||||||
|
|
||||||
|
|
||||||
# Generate avr-gdb config/init file which does the following: |
|
||||||
# define the reset signal, load the target file, connect to target, and set |
|
||||||
# a breakpoint at main(). |
|
||||||
gdb-config: |
|
||||||
@$(REMOVE) $(GDBINIT_FILE) |
|
||||||
@echo define reset >> $(GDBINIT_FILE) |
|
||||||
@echo SIGNAL SIGHUP >> $(GDBINIT_FILE) |
|
||||||
@echo end >> $(GDBINIT_FILE) |
|
||||||
@echo file $(TARGET).elf >> $(GDBINIT_FILE) |
|
||||||
@echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE) |
|
||||||
ifeq ($(DEBUG_BACKEND),simulavr) |
|
||||||
@echo load >> $(GDBINIT_FILE) |
|
||||||
endif |
|
||||||
@echo break main >> $(GDBINIT_FILE) |
|
||||||
|
|
||||||
debug: gdb-config $(TARGET).elf |
|
||||||
ifeq ($(DEBUG_BACKEND), avarice) |
|
||||||
@echo Starting AVaRICE - Press enter when "waiting to connect" message displays. |
|
||||||
@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \ |
|
||||||
$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT) |
|
||||||
@$(WINSHELL) /c pause |
|
||||||
|
|
||||||
else |
|
||||||
@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \ |
|
||||||
$(DEBUG_MFREQ) --port $(DEBUG_PORT) |
|
||||||
endif |
|
||||||
@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE) |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. |
|
||||||
COFFCONVERT = $(OBJCOPY) --debugging |
|
||||||
COFFCONVERT += --change-section-address .data-0x800000 |
|
||||||
COFFCONVERT += --change-section-address .bss-0x800000 |
|
||||||
COFFCONVERT += --change-section-address .noinit-0x800000 |
|
||||||
COFFCONVERT += --change-section-address .eeprom-0x810000 |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
coff: $(TARGET).elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_COFF) $(TARGET).cof |
|
||||||
$(COFFCONVERT) -O coff-avr $< $(TARGET).cof |
|
||||||
|
|
||||||
|
|
||||||
extcoff: $(TARGET).elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_EXTENDED_COFF) $(TARGET).cof |
|
||||||
$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Create final output files (.hex, .eep) from ELF output file. |
|
||||||
%.hex: %.elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_FLASH) $@ |
|
||||||
$(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock $< $@ |
|
||||||
|
|
||||||
%.eep: %.elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_EEPROM) $@ |
|
||||||
-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ |
|
||||||
--change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0 |
|
||||||
|
|
||||||
# Create extended listing file from ELF output file. |
|
||||||
%.lss: %.elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_EXTENDED_LISTING) $@ |
|
||||||
$(OBJDUMP) -h -S -z $< > $@ |
|
||||||
|
|
||||||
# Create a symbol table from ELF output file. |
|
||||||
%.sym: %.elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_SYMBOL_TABLE) $@ |
|
||||||
$(NM) -n $< > $@ |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Create library from object files. |
|
||||||
.SECONDARY : $(TARGET).a |
|
||||||
.PRECIOUS : $(OBJ) |
|
||||||
%.a: $(OBJ) |
|
||||||
@echo |
|
||||||
@echo $(MSG_CREATING_LIBRARY) $@ |
|
||||||
$(AR) $@ $(OBJ) |
|
||||||
|
|
||||||
|
|
||||||
# Link: create ELF output file from object files. |
|
||||||
.SECONDARY : $(TARGET).elf |
|
||||||
.PRECIOUS : $(OBJ) |
|
||||||
%.elf: $(OBJ) |
|
||||||
@echo |
|
||||||
@echo $(MSG_LINKING) $@ |
|
||||||
$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS) |
|
||||||
|
|
||||||
|
|
||||||
# Compile: create object files from C source files. |
|
||||||
$(OBJDIR)/%.o : %.c |
|
||||||
@echo |
|
||||||
@echo $(MSG_COMPILING) $< |
|
||||||
$(CC) -c $(ALL_CFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Compile: create object files from C++ source files. |
|
||||||
$(OBJDIR)/%.o : %.cpp |
|
||||||
@echo |
|
||||||
@echo $(MSG_COMPILING_CPP) $< |
|
||||||
$(CC) -c $(ALL_CPPFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Compile: create assembler files from C source files. |
|
||||||
%.s : %.c |
|
||||||
$(CC) -S $(ALL_CFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Compile: create assembler files from C++ source files. |
|
||||||
%.s : %.cpp |
|
||||||
$(CC) -S $(ALL_CPPFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Assemble: create object files from assembler source files. |
|
||||||
$(OBJDIR)/%.o : %.S |
|
||||||
@echo |
|
||||||
@echo $(MSG_ASSEMBLING) $< |
|
||||||
$(CC) -c $(ALL_ASFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Create preprocessed source for use in sending a bug report. |
|
||||||
%.i : %.c |
|
||||||
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Target: clean project. |
|
||||||
clean: begin clean_list end |
|
||||||
|
|
||||||
clean_list : |
|
||||||
@echo |
|
||||||
@echo $(MSG_CLEANING) |
|
||||||
$(REMOVE) $(TARGET).hex |
|
||||||
$(REMOVE) $(TARGET).eep |
|
||||||
$(REMOVE) $(TARGET).cof |
|
||||||
$(REMOVE) $(TARGET).elf |
|
||||||
$(REMOVE) $(TARGET).map |
|
||||||
$(REMOVE) $(TARGET).sym |
|
||||||
$(REMOVE) $(TARGET).lss |
|
||||||
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) |
|
||||||
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) |
|
||||||
$(REMOVE) $(SRC:.c=.s) |
|
||||||
$(REMOVE) $(SRC:.c=.d) |
|
||||||
$(REMOVE) $(SRC:.c=.i) |
|
||||||
$(REMOVEDIR) .dep |
|
||||||
|
|
||||||
doxygen: |
|
||||||
@echo Generating Project Documentation \($(TARGET)\)... |
|
||||||
@if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ |
|
||||||
exit 1; \ |
|
||||||
fi; |
|
||||||
@echo Documentation Generation Complete. |
|
||||||
|
|
||||||
|
|
||||||
clean_doxygen: |
|
||||||
rm -rf Documentation |
|
||||||
|
|
||||||
checksource: |
|
||||||
@for f in $(SRC) $(CPPSRC) $(ASRC); do \ |
|
||||||
if [ -f $$f ]; then \ |
|
||||||
echo "Found Source File: $$f" ; \ |
|
||||||
else \ |
|
||||||
echo "Source File Not Found: $$f" ; \ |
|
||||||
fi; done |
|
||||||
|
|
||||||
|
|
||||||
# Create object files directory |
|
||||||
$(shell mkdir $(OBJDIR) 2>/dev/null) |
|
||||||
|
|
||||||
|
|
||||||
# Include the dependency files. |
|
||||||
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*) |
|
||||||
|
|
||||||
|
|
||||||
# Listing of phony targets. |
|
||||||
.PHONY : all begin finish end sizebefore sizeafter gccversion \ |
|
||||||
build elf hex eep lss sym coff extcoff doxygen clean \ |
|
||||||
clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ |
|
||||||
debug gdb-config checksource |
|
||||||
@ -0,0 +1,63 @@ |
|||||||
|
# |
||||||
|
# LUFA Library |
||||||
|
# Copyright (C) Dean Camera, 2012. |
||||||
|
# |
||||||
|
# dean [at] fourwalledcubicle [dot] com |
||||||
|
# www.lufa-lib.org |
||||||
|
# |
||||||
|
# -------------------------------------- |
||||||
|
# LUFA Project Makefile. |
||||||
|
# -------------------------------------- |
||||||
|
|
||||||
|
MCU = at90usb1287 |
||||||
|
ARCH = AVR8 |
||||||
|
BOARD = NONE |
||||||
|
F_CPU = 8000000 |
||||||
|
|
||||||
|
ifeq ($(ARCH), AVR8) |
||||||
|
F_USB = 8000000 |
||||||
|
else ifeq ($(ARCH), XMEGA) |
||||||
|
F_USB = 48000000 |
||||||
|
else ifeq ($(ARCH), UC3) |
||||||
|
F_USB = 48000000 |
||||||
|
endif |
||||||
|
|
||||||
|
OPTIMIZATION = 1 |
||||||
|
TARGET = Test |
||||||
|
SRC = $(TARGET)_C.c $(TARGET)_CPP.cpp Dummy.S $(LUFA_SRC_USB) |
||||||
|
LUFA_PATH = ../../LUFA/ |
||||||
|
|
||||||
|
CC_FLAGS = -Wextra |
||||||
|
#CC_FLAGS += -Werror # FIXME |
||||||
|
CC_FLAGS += -Wformat=2 |
||||||
|
CC_FLAGS += -Winit-self |
||||||
|
CC_FLAGS += -Wswitch-enum |
||||||
|
CC_FLAGS += -Wunused |
||||||
|
CC_FLAGS += -Wundef |
||||||
|
CC_FLAGS += -Wpointer-arith |
||||||
|
CC_FLAGS += -Wcast-align |
||||||
|
CC_FLAGS += -Wwrite-strings |
||||||
|
CC_FLAGS += -Wlogical-op |
||||||
|
CC_FLAGS += -Wmissing-parameter-type |
||||||
|
CC_FLAGS += -Wmissing-declarations |
||||||
|
CC_FLAGS += -Wmissing-field-initializers |
||||||
|
CC_FLAGS += -Wmissing-format-attribute |
||||||
|
CC_FLAGS += -Wnested-externs |
||||||
|
CC_FLAGS += -Woverlength-strings |
||||||
|
|
||||||
|
# Only enable rendundant declaration warnings for AVR8 target (FIXME) |
||||||
|
ifeq ($(ARCH), AVR8) |
||||||
|
CC_FLAGS += -Wredundant-decls |
||||||
|
endif |
||||||
|
|
||||||
|
# Potential additional warnings to enable in the future (FIXME) |
||||||
|
#CC_FLAGS += -Wswitch-default |
||||||
|
#CC_FLAGS += -Wc++-compat |
||||||
|
#CC_FLAGS += -Wcast-qual |
||||||
|
#CC_FLAGS += -Wconversion |
||||||
|
#CC_FLAGS += -Wjump-misses-init |
||||||
|
#CC_FLAGS += -pedantic |
||||||
|
|
||||||
|
# Include LUFA build script makefiles |
||||||
|
include $(LUFA_PATH)/Build/lufa.sources.in |
||||||
|
include $(LUFA_PATH)/Build/lufa.build.in |
||||||
@ -1,733 +0,0 @@ |
|||||||
# Hey Emacs, this is a -*- makefile -*- |
|
||||||
#---------------------------------------------------------------------------- |
|
||||||
# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al. |
|
||||||
# >> Modified for use with the LUFA project. << |
|
||||||
# |
|
||||||
# Released to the Public Domain |
|
||||||
# |
|
||||||
# Additional material for this makefile was written by: |
|
||||||
# Peter Fleury |
|
||||||
# Tim Henigan |
|
||||||
# Colin O'Flynn |
|
||||||
# Reiner Patommel |
|
||||||
# Markus Pfaff |
|
||||||
# Sander Pool |
|
||||||
# Frederik Rouleau |
|
||||||
# Carlos Lamas |
|
||||||
# Dean Camera |
|
||||||
# Opendous Inc. |
|
||||||
# Denver Gingerich |
|
||||||
# |
|
||||||
#---------------------------------------------------------------------------- |
|
||||||
# On command line: |
|
||||||
# |
|
||||||
# make all = Make software. |
|
||||||
# |
|
||||||
# make clean = Clean out built project files. |
|
||||||
# |
|
||||||
# make coff = Convert ELF to AVR COFF. |
|
||||||
# |
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF. |
|
||||||
# |
|
||||||
# make program = Download the hex file to the device, using avrdude. |
|
||||||
# Please customize the avrdude settings below first! |
|
||||||
# |
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must |
|
||||||
# have dfu-programmer installed). |
|
||||||
# |
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must |
|
||||||
# have Atmel FLIP installed). |
|
||||||
# |
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer |
|
||||||
# (must have dfu-programmer installed). |
|
||||||
# |
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP |
|
||||||
# (must have Atmel FLIP installed). |
|
||||||
# |
|
||||||
# make doxygen = Generate DoxyGen documentation for the project (must have |
|
||||||
# DoxyGen installed) |
|
||||||
# |
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging, |
|
||||||
# with avr-gdb or avr-insight as the front end for debugging. |
|
||||||
# |
|
||||||
# make filename.s = Just compile filename.c into the assembler code only. |
|
||||||
# |
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting |
|
||||||
# bug reports to the GCC project. |
|
||||||
# |
|
||||||
# To rebuild project do "make clean" then "make all". |
|
||||||
#---------------------------------------------------------------------------- |
|
||||||
|
|
||||||
|
|
||||||
# MCU name |
|
||||||
MCU = atxmega128a1u |
|
||||||
|
|
||||||
|
|
||||||
# Targeted chip architecture (see library "Architectures" documentation) |
|
||||||
ARCH = XMEGA |
|
||||||
|
|
||||||
|
|
||||||
# Target board (see library "Board Types" documentation, NONE for projects not requiring |
|
||||||
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called |
|
||||||
# "Board" inside the application directory. |
|
||||||
BOARD = NONE |
|
||||||
|
|
||||||
|
|
||||||
# Processor frequency. |
|
||||||
# This will define a symbol, F_CPU, in all source code files equal to the |
|
||||||
# processor frequency in Hz. You can then use this symbol in your source code to |
|
||||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done |
|
||||||
# automatically to create a 32-bit value in your source code. |
|
||||||
# |
|
||||||
# This should be the frequency the system core runs at, after the system clock |
|
||||||
# has been set up correctly and started. |
|
||||||
F_CPU = 24000000 |
|
||||||
|
|
||||||
|
|
||||||
# USB controller master clock frequency. |
|
||||||
# This will define a symbol, F_USB, in all source code files equal to the |
|
||||||
# input clock frequency of the USB controller's clock generator in Hz. |
|
||||||
# |
|
||||||
# For the XMEGA chips, this should be equal to a multiple of 6MHz for Low |
|
||||||
# Speed USB mode, or a multiple of 48MHz for Full Speed USB mode. |
|
||||||
F_USB = 48000000 |
|
||||||
|
|
||||||
|
|
||||||
# Output format. (can be srec, ihex, binary) |
|
||||||
FORMAT = ihex |
|
||||||
|
|
||||||
|
|
||||||
# Target file name (without extension). |
|
||||||
TARGET = Test |
|
||||||
|
|
||||||
|
|
||||||
# Object files directory |
|
||||||
# To put object files in current directory, use a dot (.), do NOT make |
|
||||||
# this an empty or blank macro! |
|
||||||
OBJDIR = . |
|
||||||
|
|
||||||
|
|
||||||
# Path to the LUFA library |
|
||||||
LUFA_PATH = ../.. |
|
||||||
|
|
||||||
|
|
||||||
# LUFA library compile-time options and predefined tokens |
|
||||||
LUFA_OPTS = |
|
||||||
|
|
||||||
|
|
||||||
# Create the LUFA source path variables by including the LUFA root makefile |
|
||||||
include $(LUFA_PATH)/LUFA/makefile |
|
||||||
|
|
||||||
|
|
||||||
# List C source files here. (C dependencies are automatically generated.) |
|
||||||
SRC = Test_C.c \ |
|
||||||
$(LUFA_SRC_USB) \ |
|
||||||
$(LUFA_SRC_USBCLASS) \ |
|
||||||
$(LUFA_SRC_SERIAL) |
|
||||||
|
|
||||||
|
|
||||||
# List C++ source files here. (C dependencies are automatically generated.) |
|
||||||
CPPSRC = Test_CPP.cpp |
|
||||||
|
|
||||||
|
|
||||||
# List Assembler source files here. |
|
||||||
# Make them always end in a capital .S. Files ending in a lowercase .s |
|
||||||
# will not be considered source files but generated files (assembler |
|
||||||
# output from the compiler), and will be deleted upon "make clean"! |
|
||||||
# Even though the DOS/Win* filesystem matches both .s and .S the same, |
|
||||||
# it will preserve the spelling of the filenames, and gcc itself does |
|
||||||
# care about how the name is spelled on its command-line. |
|
||||||
ASRC = Dummy.S |
|
||||||
|
|
||||||
|
|
||||||
# Optimization level, can be [0, 1, 2, 3, s]. |
|
||||||
# 0 = turn off optimization. s = optimize for size. |
|
||||||
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) |
|
||||||
OPT = 1 |
|
||||||
|
|
||||||
|
|
||||||
# List any extra directories to look for include files here. |
|
||||||
# Each directory must be seperated by a space. |
|
||||||
# Use forward slashes for directory separators. |
|
||||||
# For a directory that has spaces, enclose it in quotes. |
|
||||||
EXTRAINCDIRS = $(LUFA_PATH)/ |
|
||||||
|
|
||||||
|
|
||||||
# Compiler flag to set the C Standard level. |
|
||||||
# c89 = "ANSI" C |
|
||||||
# gnu89 = c89 plus GCC extensions |
|
||||||
# c99 = ISO C99 standard (not yet fully implemented) |
|
||||||
# gnu99 = c99 plus GCC extensions |
|
||||||
CSTANDARD = -std=gnu99 |
|
||||||
|
|
||||||
|
|
||||||
# Place -D or -U options here for C sources |
|
||||||
CDEFS = -DF_CPU=$(F_CPU)UL |
|
||||||
CDEFS += -DF_USB=$(F_USB)UL |
|
||||||
CDEFS += -DBOARD=BOARD_$(BOARD) |
|
||||||
CDEFS += -DARCH=ARCH_$(ARCH) |
|
||||||
CDEFS += $(LUFA_OPTS) |
|
||||||
|
|
||||||
|
|
||||||
# Place -D or -U options here for ASM sources |
|
||||||
ADEFS = -DF_CPU=$(F_CPU) |
|
||||||
ADEFS += -DF_USB=$(F_USB)UL |
|
||||||
ADEFS += -DBOARD=BOARD_$(BOARD) |
|
||||||
ADEFS += -DARCH=ARCH_$(ARCH) |
|
||||||
ADEFS += $(LUFA_OPTS) |
|
||||||
|
|
||||||
# Place -D or -U options here for C++ sources |
|
||||||
CPPDEFS = -DF_CPU=$(F_CPU)UL |
|
||||||
CPPDEFS += -DF_USB=$(F_USB)UL |
|
||||||
CPPDEFS += -DBOARD=BOARD_$(BOARD) |
|
||||||
CPPDEFS += -DARCH=ARCH_$(ARCH) |
|
||||||
CPPDEFS += $(LUFA_OPTS) |
|
||||||
|
|
||||||
|
|
||||||
# Debugging format. |
|
||||||
# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs. |
|
||||||
# AVR Studio 4.10 requires dwarf-2. |
|
||||||
# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run. |
|
||||||
DEBUG = dwarf-2 |
|
||||||
|
|
||||||
|
|
||||||
#---------------- Compiler Options C ---------------- |
|
||||||
# -g*: generate debugging information |
|
||||||
# -O*: optimization level |
|
||||||
# -f...: tuning, see GCC manual and avr-libc documentation |
|
||||||
# -Wall...: warning level |
|
||||||
# -Wa,...: tell GCC to pass this to the assembler. |
|
||||||
# -adhlns...: create assembler listing |
|
||||||
CFLAGS = -g$(DEBUG) |
|
||||||
CFLAGS += $(CDEFS) |
|
||||||
CFLAGS += -O$(OPT) |
|
||||||
CFLAGS += -funsigned-char |
|
||||||
CFLAGS += -funsigned-bitfields |
|
||||||
CFLAGS += -ffunction-sections |
|
||||||
CFLAGS += -fno-inline-small-functions |
|
||||||
CFLAGS += -fpack-struct |
|
||||||
CFLAGS += -fshort-enums |
|
||||||
CFLAGS += -fno-strict-aliasing |
|
||||||
CFLAGS += -fno-split-wide-types |
|
||||||
#CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) |
|
||||||
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) |
|
||||||
CFLAGS += $(CSTANDARD) |
|
||||||
CFLAGS += -Werror |
|
||||||
CFLAGS += -Wall |
|
||||||
CFLAGS += -Wextra |
|
||||||
CFLAGS += -Wstrict-prototypes |
|
||||||
CFLAGS += -Wformat=2 |
|
||||||
CFLAGS += -Winit-self |
|
||||||
CFLAGS += -Wswitch-enum |
|
||||||
CFLAGS += -Wunused |
|
||||||
CFLAGS += -Wundef |
|
||||||
CFLAGS += -Wpointer-arith |
|
||||||
CFLAGS += -Wcast-align |
|
||||||
CFLAGS += -Wwrite-strings |
|
||||||
CFLAGS += -Wlogical-op |
|
||||||
CFLAGS += -Wmissing-parameter-type |
|
||||||
CFLAGS += -Wmissing-declarations |
|
||||||
CFLAGS += -Wmissing-field-initializers |
|
||||||
CFLAGS += -Wmissing-format-attribute |
|
||||||
CFLAGS += -Wredundant-decls |
|
||||||
CFLAGS += -Wnested-externs |
|
||||||
CFLAGS += -Woverlength-strings |
|
||||||
#CFLAGS += -Wswitch-default |
|
||||||
#CFLAGS += -Wc++-compat |
|
||||||
#CFLAGS += -Wcast-qual |
|
||||||
#CFLAGS += -Wconversion |
|
||||||
#CFLAGS += -Wjump-misses-init |
|
||||||
#CFLAGS += -pedantic |
|
||||||
|
|
||||||
|
|
||||||
#---------------- Compiler Options C++ ---------------- |
|
||||||
# -g*: generate debugging information |
|
||||||
# -O*: optimization level |
|
||||||
# -f...: tuning, see GCC manual and avr-libc documentation |
|
||||||
# -Wall...: warning level |
|
||||||
# -Wa,...: tell GCC to pass this to the assembler. |
|
||||||
# -adhlns...: create assembler listing |
|
||||||
CPPFLAGS = -g$(DEBUG) |
|
||||||
CPPFLAGS += $(CPPDEFS) |
|
||||||
CPPFLAGS += -O$(OPT) |
|
||||||
CPPFLAGS += -funsigned-char |
|
||||||
CPPFLAGS += -funsigned-bitfields |
|
||||||
CPPFLAGS += -fpack-struct |
|
||||||
CPPFLAGS += -fshort-enums |
|
||||||
CPPFLAGS += -ffunction-sections |
|
||||||
CPPFLAGS += -fno-strict-aliasing |
|
||||||
CPPFLAGS += -fno-exceptions |
|
||||||
CPPFLAGS += -Wall |
|
||||||
CPPFLAGS += -Wundef |
|
||||||
#CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) |
|
||||||
CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) |
|
||||||
#CPPFLAGS += $(CSTANDARD) |
|
||||||
|
|
||||||
|
|
||||||
#---------------- Assembler Options ---------------- |
|
||||||
# -Wa,...: tell GCC to pass this to the assembler. |
|
||||||
# -adhlns: create listing |
|
||||||
# -gstabs: have the assembler create line number information; note that |
|
||||||
# for use in COFF files, additional information about filenames |
|
||||||
# and function names needs to be present in the assembler source |
|
||||||
# files -- see avr-libc docs [FIXME: not yet described there] |
|
||||||
# -listing-cont-lines: Sets the maximum number of continuation lines of hex |
|
||||||
# dump that will be displayed for a given single line of source input. |
|
||||||
ASFLAGS = $(ADEFS) |
|
||||||
#ASFLAGS += -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 |
|
||||||
|
|
||||||
|
|
||||||
#---------------- Library Options ---------------- |
|
||||||
# Minimalistic printf version |
|
||||||
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min |
|
||||||
|
|
||||||
# Floating point printf version (requires MATH_LIB = -lm below) |
|
||||||
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt |
|
||||||
|
|
||||||
# If this is left blank, then it will use the Standard printf version. |
|
||||||
PRINTF_LIB = |
|
||||||
#PRINTF_LIB = $(PRINTF_LIB_MIN) |
|
||||||
#PRINTF_LIB = $(PRINTF_LIB_FLOAT) |
|
||||||
|
|
||||||
|
|
||||||
# Minimalistic scanf version |
|
||||||
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min |
|
||||||
|
|
||||||
# Floating point + %[ scanf version (requires MATH_LIB = -lm below) |
|
||||||
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt |
|
||||||
|
|
||||||
# If this is left blank, then it will use the Standard scanf version. |
|
||||||
SCANF_LIB = |
|
||||||
#SCANF_LIB = $(SCANF_LIB_MIN) |
|
||||||
#SCANF_LIB = $(SCANF_LIB_FLOAT) |
|
||||||
|
|
||||||
|
|
||||||
MATH_LIB = -lm |
|
||||||
|
|
||||||
|
|
||||||
# List any extra directories to look for libraries here. |
|
||||||
# Each directory must be seperated by a space. |
|
||||||
# Use forward slashes for directory separators. |
|
||||||
# For a directory that has spaces, enclose it in quotes. |
|
||||||
EXTRALIBDIRS = |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#---------------- External Memory Options ---------------- |
|
||||||
|
|
||||||
# 64 KB of external RAM, starting after internal RAM (ATmega128!), |
|
||||||
# used for variables (.data/.bss) and heap (malloc()). |
|
||||||
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff |
|
||||||
|
|
||||||
# 64 KB of external RAM, starting after internal RAM (ATmega128!), |
|
||||||
# only used for heap (malloc()). |
|
||||||
#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff |
|
||||||
|
|
||||||
EXTMEMOPTS = |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#---------------- Linker Options ---------------- |
|
||||||
# -Wl,...: tell GCC to pass this to linker. |
|
||||||
# -Map: create map file |
|
||||||
# --cref: add cross reference to map file |
|
||||||
#LDFLAGS = -Wl,-Map=$(TARGET).map,--cref |
|
||||||
LDFLAGS += -Wl,--relax |
|
||||||
LDFLAGS += -Wl,--gc-sections |
|
||||||
LDFLAGS += $(EXTMEMOPTS) |
|
||||||
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) |
|
||||||
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB) |
|
||||||
#LDFLAGS += -T linker_script.x |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#---------------- Programming Options (avrdude) ---------------- |
|
||||||
|
|
||||||
# Programming hardware |
|
||||||
# Type: avrdude -c ? |
|
||||||
# to get a full listing. |
|
||||||
# |
|
||||||
AVRDUDE_PROGRAMMER = jtagmkII |
|
||||||
|
|
||||||
# com1 = serial port. Use lpt1 to connect to parallel port. |
|
||||||
AVRDUDE_PORT = usb |
|
||||||
|
|
||||||
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex |
|
||||||
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep |
|
||||||
|
|
||||||
|
|
||||||
# Uncomment the following if you want avrdude's erase cycle counter. |
|
||||||
# Note that this counter needs to be initialized first using -Yn, |
|
||||||
# see avrdude manual. |
|
||||||
#AVRDUDE_ERASE_COUNTER = -y |
|
||||||
|
|
||||||
# Uncomment the following if you do /not/ wish a verification to be |
|
||||||
# performed after programming the device. |
|
||||||
#AVRDUDE_NO_VERIFY = -V |
|
||||||
|
|
||||||
# Increase verbosity level. Please use this when submitting bug |
|
||||||
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> |
|
||||||
# to submit bug reports. |
|
||||||
#AVRDUDE_VERBOSE = -v -v |
|
||||||
|
|
||||||
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) |
|
||||||
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY) |
|
||||||
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE) |
|
||||||
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER) |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#---------------- Debugging Options ---------------- |
|
||||||
|
|
||||||
# For simulavr only - target MCU frequency. |
|
||||||
DEBUG_MFREQ = $(F_CPU) |
|
||||||
|
|
||||||
# Set the DEBUG_UI to either gdb or insight. |
|
||||||
# DEBUG_UI = gdb |
|
||||||
DEBUG_UI = insight |
|
||||||
|
|
||||||
# Set the debugging back-end to either avarice, simulavr. |
|
||||||
DEBUG_BACKEND = avarice |
|
||||||
#DEBUG_BACKEND = simulavr |
|
||||||
|
|
||||||
# GDB Init Filename. |
|
||||||
GDBINIT_FILE = __avr_gdbinit |
|
||||||
|
|
||||||
# When using avarice settings for the JTAG |
|
||||||
JTAG_DEV = /dev/com1 |
|
||||||
|
|
||||||
# Debugging port used to communicate between GDB / avarice / simulavr. |
|
||||||
DEBUG_PORT = 4242 |
|
||||||
|
|
||||||
# Debugging host used to communicate between GDB / avarice / simulavr, normally |
|
||||||
# just set to localhost unless doing some sort of crazy debugging when |
|
||||||
# avarice is running on a different computer. |
|
||||||
DEBUG_HOST = localhost |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#============================================================================ |
|
||||||
|
|
||||||
|
|
||||||
# Define programs and commands. |
|
||||||
SHELL = sh |
|
||||||
CC = avr-gcc |
|
||||||
OBJCOPY = avr-objcopy |
|
||||||
OBJDUMP = avr-objdump |
|
||||||
SIZE = avr-size |
|
||||||
AR = avr-ar rcs |
|
||||||
NM = avr-nm |
|
||||||
AVRDUDE = avrdude |
|
||||||
REMOVE = rm -f |
|
||||||
REMOVEDIR = rm -rf |
|
||||||
COPY = cp |
|
||||||
WINSHELL = cmd |
|
||||||
|
|
||||||
|
|
||||||
# Define Messages |
|
||||||
# English |
|
||||||
MSG_ERRORS_NONE = Errors: none |
|
||||||
MSG_BEGIN = -------- begin -------- |
|
||||||
MSG_END = -------- end -------- |
|
||||||
MSG_SIZE_BEFORE = Size before: |
|
||||||
MSG_SIZE_AFTER = Size after: |
|
||||||
MSG_COFF = Converting to AVR COFF: |
|
||||||
MSG_EXTENDED_COFF = Converting to AVR Extended COFF: |
|
||||||
MSG_FLASH = Creating load file for Flash: |
|
||||||
MSG_EEPROM = Creating load file for EEPROM: |
|
||||||
MSG_EXTENDED_LISTING = Creating Extended Listing: |
|
||||||
MSG_SYMBOL_TABLE = Creating Symbol Table: |
|
||||||
MSG_LINKING = Linking: |
|
||||||
MSG_COMPILING = Compiling C: |
|
||||||
MSG_COMPILING_CPP = Compiling C++: |
|
||||||
MSG_ASSEMBLING = Assembling: |
|
||||||
MSG_CLEANING = Cleaning project: |
|
||||||
MSG_CREATING_LIBRARY = Creating library: |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Define all object files. |
|
||||||
OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) |
|
||||||
|
|
||||||
# Define all listing files. |
|
||||||
LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) |
|
||||||
|
|
||||||
|
|
||||||
# Compiler flags to generate dependency files. |
|
||||||
#GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d |
|
||||||
|
|
||||||
|
|
||||||
# Combine all necessary flags and optional flags. |
|
||||||
# Add target processor to flags. |
|
||||||
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS) |
|
||||||
ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS) |
|
||||||
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Default target. |
|
||||||
all: begin gccversion sizebefore build sizeafter end |
|
||||||
|
|
||||||
# Change the build target to build a HEX file or a library. |
|
||||||
build: elf hex eep lss sym |
|
||||||
#build: lib |
|
||||||
|
|
||||||
|
|
||||||
elf: $(TARGET).elf |
|
||||||
hex: $(TARGET).hex |
|
||||||
eep: $(TARGET).eep |
|
||||||
lss: $(TARGET).lss |
|
||||||
sym: $(TARGET).sym |
|
||||||
LIBNAME=lib$(TARGET).a |
|
||||||
lib: $(LIBNAME) |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Eye candy. |
|
||||||
# AVR Studio 3.x does not check make's exit code but relies on |
|
||||||
# the following magic strings to be generated by the compile job. |
|
||||||
begin: |
|
||||||
@echo |
|
||||||
@echo $(MSG_BEGIN) |
|
||||||
|
|
||||||
end: |
|
||||||
@echo $(MSG_END) |
|
||||||
@echo |
|
||||||
|
|
||||||
|
|
||||||
# Display size of file. |
|
||||||
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex |
|
||||||
ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf |
|
||||||
MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) ) |
|
||||||
FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr ) |
|
||||||
|
|
||||||
|
|
||||||
sizebefore: |
|
||||||
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \ |
|
||||||
2>/dev/null; echo; fi |
|
||||||
|
|
||||||
sizeafter: |
|
||||||
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ |
|
||||||
2>/dev/null; echo; fi |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Display compiler version information. |
|
||||||
gccversion : |
|
||||||
@$(CC) --version |
|
||||||
|
|
||||||
|
|
||||||
# Program the device. |
|
||||||
program: $(TARGET).hex $(TARGET).eep |
|
||||||
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) |
|
||||||
|
|
||||||
flip: $(TARGET).hex |
|
||||||
batchisp -hardware usb -device $(MCU) -operation erase f |
|
||||||
batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program |
|
||||||
batchisp -hardware usb -device $(MCU) -operation start reset 0 |
|
||||||
|
|
||||||
dfu: $(TARGET).hex |
|
||||||
dfu-programmer $(MCU) erase |
|
||||||
dfu-programmer $(MCU) flash $(TARGET).hex |
|
||||||
dfu-programmer $(MCU) reset |
|
||||||
|
|
||||||
flip-ee: $(TARGET).hex $(TARGET).eep |
|
||||||
$(COPY) $(TARGET).eep $(TARGET)eep.hex |
|
||||||
batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase |
|
||||||
batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program |
|
||||||
batchisp -hardware usb -device $(MCU) -operation start reset 0 |
|
||||||
$(REMOVE) $(TARGET)eep.hex |
|
||||||
|
|
||||||
dfu-ee: $(TARGET).hex $(TARGET).eep |
|
||||||
dfu-programmer $(MCU) eeprom-flash $(TARGET).eep |
|
||||||
dfu-programmer $(MCU) reset |
|
||||||
|
|
||||||
|
|
||||||
# Generate avr-gdb config/init file which does the following: |
|
||||||
# define the reset signal, load the target file, connect to target, and set |
|
||||||
# a breakpoint at main(). |
|
||||||
gdb-config: |
|
||||||
@$(REMOVE) $(GDBINIT_FILE) |
|
||||||
@echo define reset >> $(GDBINIT_FILE) |
|
||||||
@echo SIGNAL SIGHUP >> $(GDBINIT_FILE) |
|
||||||
@echo end >> $(GDBINIT_FILE) |
|
||||||
@echo file $(TARGET).elf >> $(GDBINIT_FILE) |
|
||||||
@echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE) |
|
||||||
ifeq ($(DEBUG_BACKEND),simulavr) |
|
||||||
@echo load >> $(GDBINIT_FILE) |
|
||||||
endif |
|
||||||
@echo break main >> $(GDBINIT_FILE) |
|
||||||
|
|
||||||
debug: gdb-config $(TARGET).elf |
|
||||||
ifeq ($(DEBUG_BACKEND), avarice) |
|
||||||
@echo Starting AVaRICE - Press enter when "waiting to connect" message displays. |
|
||||||
@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \ |
|
||||||
$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT) |
|
||||||
@$(WINSHELL) /c pause |
|
||||||
|
|
||||||
else |
|
||||||
@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \ |
|
||||||
$(DEBUG_MFREQ) --port $(DEBUG_PORT) |
|
||||||
endif |
|
||||||
@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE) |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. |
|
||||||
COFFCONVERT = $(OBJCOPY) --debugging |
|
||||||
COFFCONVERT += --change-section-address .data-0x800000 |
|
||||||
COFFCONVERT += --change-section-address .bss-0x800000 |
|
||||||
COFFCONVERT += --change-section-address .noinit-0x800000 |
|
||||||
COFFCONVERT += --change-section-address .eeprom-0x810000 |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
coff: $(TARGET).elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_COFF) $(TARGET).cof |
|
||||||
$(COFFCONVERT) -O coff-avr $< $(TARGET).cof |
|
||||||
|
|
||||||
|
|
||||||
extcoff: $(TARGET).elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_EXTENDED_COFF) $(TARGET).cof |
|
||||||
$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Create final output files (.hex, .eep) from ELF output file. |
|
||||||
%.hex: %.elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_FLASH) $@ |
|
||||||
$(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature $< $@ |
|
||||||
|
|
||||||
%.eep: %.elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_EEPROM) $@ |
|
||||||
-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ |
|
||||||
--change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0 |
|
||||||
|
|
||||||
# Create extended listing file from ELF output file. |
|
||||||
%.lss: %.elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_EXTENDED_LISTING) $@ |
|
||||||
$(OBJDUMP) -h -S -z $< > $@ |
|
||||||
|
|
||||||
# Create a symbol table from ELF output file. |
|
||||||
%.sym: %.elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_SYMBOL_TABLE) $@ |
|
||||||
$(NM) -n $< > $@ |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Create library from object files. |
|
||||||
.SECONDARY : $(TARGET).a |
|
||||||
.PRECIOUS : $(OBJ) |
|
||||||
%.a: $(OBJ) |
|
||||||
@echo |
|
||||||
@echo $(MSG_CREATING_LIBRARY) $@ |
|
||||||
$(AR) $@ $(OBJ) |
|
||||||
|
|
||||||
|
|
||||||
# Link: create ELF output file from object files. |
|
||||||
.SECONDARY : $(TARGET).elf |
|
||||||
.PRECIOUS : $(OBJ) |
|
||||||
%.elf: $(OBJ) |
|
||||||
@echo |
|
||||||
@echo $(MSG_LINKING) $@ |
|
||||||
$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS) |
|
||||||
|
|
||||||
|
|
||||||
# Compile: create object files from C source files. |
|
||||||
$(OBJDIR)/%.o : %.c |
|
||||||
@echo |
|
||||||
@echo $(MSG_COMPILING) $< |
|
||||||
$(CC) -c $(ALL_CFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Compile: create object files from C++ source files. |
|
||||||
$(OBJDIR)/%.o : %.cpp |
|
||||||
@echo |
|
||||||
@echo $(MSG_COMPILING_CPP) $< |
|
||||||
$(CC) -c $(ALL_CPPFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Compile: create assembler files from C source files. |
|
||||||
%.s : %.c |
|
||||||
$(CC) -S $(ALL_CFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Compile: create assembler files from C++ source files. |
|
||||||
%.s : %.cpp |
|
||||||
$(CC) -S $(ALL_CPPFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Assemble: create object files from assembler source files. |
|
||||||
$(OBJDIR)/%.o : %.S |
|
||||||
@echo |
|
||||||
@echo $(MSG_ASSEMBLING) $< |
|
||||||
$(CC) -c $(ALL_ASFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Create preprocessed source for use in sending a bug report. |
|
||||||
%.i : %.c |
|
||||||
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Target: clean project. |
|
||||||
clean: begin clean_list end |
|
||||||
|
|
||||||
clean_list : |
|
||||||
@echo |
|
||||||
@echo $(MSG_CLEANING) |
|
||||||
$(REMOVE) $(TARGET).hex |
|
||||||
$(REMOVE) $(TARGET).eep |
|
||||||
$(REMOVE) $(TARGET).cof |
|
||||||
$(REMOVE) $(TARGET).elf |
|
||||||
$(REMOVE) $(TARGET).map |
|
||||||
$(REMOVE) $(TARGET).sym |
|
||||||
$(REMOVE) $(TARGET).lss |
|
||||||
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) |
|
||||||
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) |
|
||||||
$(REMOVE) $(SRC:.c=.s) |
|
||||||
$(REMOVE) $(SRC:.c=.d) |
|
||||||
$(REMOVE) $(SRC:.c=.i) |
|
||||||
$(REMOVEDIR) .dep |
|
||||||
|
|
||||||
doxygen: |
|
||||||
@echo Generating Project Documentation \($(TARGET)\)... |
|
||||||
@if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ |
|
||||||
exit 1; \ |
|
||||||
fi; |
|
||||||
@echo Documentation Generation Complete. |
|
||||||
|
|
||||||
clean_doxygen: |
|
||||||
rm -rf Documentation |
|
||||||
|
|
||||||
checksource: |
|
||||||
@for f in $(SRC) $(CPPSRC) $(ASRC); do \ |
|
||||||
if [ -f $$f ]; then \ |
|
||||||
echo "Found Source File: $$f" ; \ |
|
||||||
else \ |
|
||||||
echo "Source File Not Found: $$f" ; \ |
|
||||||
fi; done |
|
||||||
|
|
||||||
|
|
||||||
# Create object files directory |
|
||||||
$(shell mkdir $(OBJDIR) 2>/dev/null) |
|
||||||
|
|
||||||
|
|
||||||
# Include the dependency files. |
|
||||||
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*) |
|
||||||
|
|
||||||
|
|
||||||
# Listing of phony targets. |
|
||||||
.PHONY : all begin finish end sizebefore sizeafter gccversion \ |
|
||||||
build elf hex eep lss sym coff extcoff doxygen clean \ |
|
||||||
clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ |
|
||||||
debug gdb-config checksource |
|
||||||
@ -1,724 +0,0 @@ |
|||||||
# Hey Emacs, this is a -*- makefile -*- |
|
||||||
#---------------------------------------------------------------------------- |
|
||||||
# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al. |
|
||||||
# >> Modified for use with the LUFA project. << |
|
||||||
# |
|
||||||
# Released to the Public Domain |
|
||||||
# |
|
||||||
# Additional material for this makefile was written by: |
|
||||||
# Peter Fleury |
|
||||||
# Tim Henigan |
|
||||||
# Colin O'Flynn |
|
||||||
# Reiner Patommel |
|
||||||
# Markus Pfaff |
|
||||||
# Sander Pool |
|
||||||
# Frederik Rouleau |
|
||||||
# Carlos Lamas |
|
||||||
# Dean Camera |
|
||||||
# Opendous Inc. |
|
||||||
# Denver Gingerich |
|
||||||
# |
|
||||||
#---------------------------------------------------------------------------- |
|
||||||
# On command line: |
|
||||||
# |
|
||||||
# make all = Make software. |
|
||||||
# |
|
||||||
# make clean = Clean out built project files. |
|
||||||
# |
|
||||||
# make coff = Convert ELF to AVR COFF. |
|
||||||
# |
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF. |
|
||||||
# |
|
||||||
# make program = Download the hex file to the device, using avrdude. |
|
||||||
# Please customize the avrdude settings below first! |
|
||||||
# |
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must |
|
||||||
# have dfu-programmer installed). |
|
||||||
# |
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must |
|
||||||
# have Atmel FLIP installed). |
|
||||||
# |
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer |
|
||||||
# (must have dfu-programmer installed). |
|
||||||
# |
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP |
|
||||||
# (must have Atmel FLIP installed). |
|
||||||
# |
|
||||||
# make doxygen = Generate DoxyGen documentation for the project (must have |
|
||||||
# DoxyGen installed) |
|
||||||
# |
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging, |
|
||||||
# with avr-gdb or avr-insight as the front end for debugging. |
|
||||||
# |
|
||||||
# make filename.s = Just compile filename.c into the assembler code only. |
|
||||||
# |
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting |
|
||||||
# bug reports to the GCC project. |
|
||||||
# |
|
||||||
# To rebuild project do "make clean" then "make all". |
|
||||||
#---------------------------------------------------------------------------- |
|
||||||
|
|
||||||
|
|
||||||
# MCU name |
|
||||||
MCU = at90usb1287 |
|
||||||
|
|
||||||
|
|
||||||
# Target architecture (see library "Board Types" documentation). |
|
||||||
ARCH = AVR8 |
|
||||||
|
|
||||||
|
|
||||||
# Target board (see library "Board Types" documentation, NONE for projects not requiring |
|
||||||
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called |
|
||||||
# "Board" inside the application directory. |
|
||||||
BOARD = NONE |
|
||||||
|
|
||||||
|
|
||||||
# Processor frequency. |
|
||||||
# This will define a symbol, F_CPU, in all source code files equal to the |
|
||||||
# processor frequency in Hz. You can then use this symbol in your source code to |
|
||||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done |
|
||||||
# automatically to create a 32-bit value in your source code. |
|
||||||
# |
|
||||||
# This will be an integer division of F_USB below, as it is sourced by |
|
||||||
# F_USB after it has run through any CPU prescalers. Note that this value |
|
||||||
# does not *change* the processor frequency - it should merely be updated to |
|
||||||
# reflect the processor speed set externally so that the code can use accurate |
|
||||||
# software delays. |
|
||||||
F_CPU = 16000000 |
|
||||||
|
|
||||||
|
|
||||||
# Input clock frequency. |
|
||||||
# This will define a symbol, F_USB, in all source code files equal to the |
|
||||||
# input clock frequency (before any prescaling is performed) in Hz. This value may |
|
||||||
# differ from F_CPU if prescaling is used on the latter, and is required as the |
|
||||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed |
|
||||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' |
|
||||||
# at the end, this will be done automatically to create a 32-bit value in your |
|
||||||
# source code. |
|
||||||
# |
|
||||||
# If no clock division is performed on the input clock inside the AVR (via the |
|
||||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. |
|
||||||
F_USB = $(F_CPU) |
|
||||||
|
|
||||||
|
|
||||||
# Output format. (can be srec, ihex, binary) |
|
||||||
FORMAT = ihex |
|
||||||
|
|
||||||
|
|
||||||
# Target file name (without extension). |
|
||||||
TARGET = Test |
|
||||||
|
|
||||||
|
|
||||||
# Object files directory |
|
||||||
# To put object files in current directory, use a dot (.), do NOT make |
|
||||||
# this an empty or blank macro! |
|
||||||
OBJDIR = . |
|
||||||
|
|
||||||
|
|
||||||
# Path to the LUFA library |
|
||||||
LUFA_PATH = ../.. |
|
||||||
|
|
||||||
|
|
||||||
# LUFA library compile-time options and predefined tokens |
|
||||||
LUFA_OPTS = |
|
||||||
|
|
||||||
|
|
||||||
# Create the LUFA source path variables by including the LUFA root makefile |
|
||||||
include $(LUFA_PATH)/LUFA/makefile |
|
||||||
|
|
||||||
|
|
||||||
# List C source files here. (C dependencies are automatically generated.) |
|
||||||
SRC = Test.c \ |
|
||||||
$(LUFA_SRC_USB) |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# List C++ source files here. (C dependencies are automatically generated.) |
|
||||||
CPPSRC = |
|
||||||
|
|
||||||
|
|
||||||
# List Assembler source files here. |
|
||||||
# Make them always end in a capital .S. Files ending in a lowercase .s |
|
||||||
# will not be considered source files but generated files (assembler |
|
||||||
# output from the compiler), and will be deleted upon "make clean"! |
|
||||||
# Even though the DOS/Win* filesystem matches both .s and .S the same, |
|
||||||
# it will preserve the spelling of the filenames, and gcc itself does |
|
||||||
# care about how the name is spelled on its command-line. |
|
||||||
ASRC = Dummy.S |
|
||||||
|
|
||||||
|
|
||||||
# Optimization level, can be [0, 1, 2, 3, s]. |
|
||||||
# 0 = turn off optimization. s = optimize for size. |
|
||||||
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) |
|
||||||
OPT = 1 |
|
||||||
|
|
||||||
|
|
||||||
# Debugging format. |
|
||||||
# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs. |
|
||||||
# AVR Studio 4.10 requires dwarf-2. |
|
||||||
# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run. |
|
||||||
DEBUG = dwarf-2 |
|
||||||
|
|
||||||
|
|
||||||
# List any extra directories to look for include files here. |
|
||||||
# Each directory must be seperated by a space. |
|
||||||
# Use forward slashes for directory separators. |
|
||||||
# For a directory that has spaces, enclose it in quotes. |
|
||||||
EXTRAINCDIRS = $(LUFA_PATH)/ |
|
||||||
|
|
||||||
|
|
||||||
# Compiler flag to set the C Standard level. |
|
||||||
# c89 = "ANSI" C |
|
||||||
# gnu89 = c89 plus GCC extensions |
|
||||||
# c99 = ISO C99 standard (not yet fully implemented) |
|
||||||
# gnu99 = c99 plus GCC extensions |
|
||||||
CSTANDARD = -std=c99 |
|
||||||
|
|
||||||
|
|
||||||
# Place -D or -U options here for C sources |
|
||||||
CDEFS = -DF_CPU=$(F_CPU)UL |
|
||||||
CDEFS += -DF_USB=$(F_USB)UL |
|
||||||
CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH) |
|
||||||
CDEFS += $(LUFA_OPTS) |
|
||||||
|
|
||||||
|
|
||||||
# Place -D or -U options here for ASM sources |
|
||||||
ADEFS = -DF_CPU=$(F_CPU) |
|
||||||
ADEFS += -DF_USB=$(F_USB)UL |
|
||||||
ADEFS += -DBOARD=BOARD_$(BOARD) |
|
||||||
ADEFS += $(LUFA_OPTS) |
|
||||||
|
|
||||||
# Place -D or -U options here for C++ sources |
|
||||||
CPPDEFS = -DF_CPU=$(F_CPU)UL |
|
||||||
CPPDEFS += -DF_USB=$(F_USB)UL |
|
||||||
CPPDEFS += -DBOARD=BOARD_$(BOARD) |
|
||||||
CPPDEFS += $(LUFA_OPTS) |
|
||||||
#CPPDEFS += -D__STDC_LIMIT_MACROS |
|
||||||
#CPPDEFS += -D__STDC_CONSTANT_MACROS |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#---------------- Compiler Options C ---------------- |
|
||||||
# -g*: generate debugging information |
|
||||||
# -O*: optimization level |
|
||||||
# -f...: tuning, see GCC manual and avr-libc documentation |
|
||||||
# -Wall...: warning level |
|
||||||
# -Wa,...: tell GCC to pass this to the assembler. |
|
||||||
# -adhlns...: create assembler listing |
|
||||||
CFLAGS = -g$(DEBUG) |
|
||||||
CFLAGS += $(CDEFS) |
|
||||||
CFLAGS += -O$(OPT) |
|
||||||
CFLAGS += -funsigned-char |
|
||||||
CFLAGS += -funsigned-bitfields |
|
||||||
CFLAGS += -ffunction-sections |
|
||||||
CFLAGS += -fno-inline-small-functions |
|
||||||
CFLAGS += -fpack-struct |
|
||||||
CFLAGS += -fshort-enums |
|
||||||
CFLAGS += -fno-strict-aliasing |
|
||||||
CFLAGS += -fno-split-wide-types |
|
||||||
CFLAGS += -Wall |
|
||||||
CFLAGS += -Wstrict-prototypes |
|
||||||
#CFLAGS += -mshort-calls |
|
||||||
#CFLAGS += -fno-unit-at-a-time |
|
||||||
#CFLAGS += -Wundef |
|
||||||
#CFLAGS += -Wunreachable-code |
|
||||||
#CFLAGS += -Wsign-compare |
|
||||||
#CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) |
|
||||||
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) |
|
||||||
CFLAGS += $(CSTANDARD) |
|
||||||
|
|
||||||
|
|
||||||
#---------------- Compiler Options C++ ---------------- |
|
||||||
# -g*: generate debugging information |
|
||||||
# -O*: optimization level |
|
||||||
# -f...: tuning, see GCC manual and avr-libc documentation |
|
||||||
# -Wall...: warning level |
|
||||||
# -Wa,...: tell GCC to pass this to the assembler. |
|
||||||
# -adhlns...: create assembler listing |
|
||||||
CPPFLAGS = -g$(DEBUG) |
|
||||||
CPPFLAGS += $(CPPDEFS) |
|
||||||
CPPFLAGS += -O$(OPT) |
|
||||||
CPPFLAGS += -funsigned-char |
|
||||||
CPPFLAGS += -funsigned-bitfields |
|
||||||
CPPFLAGS += -fpack-struct |
|
||||||
CPPFLAGS += -fshort-enums |
|
||||||
CPPFLAGS += -fno-exceptions |
|
||||||
CPPFLAGS += -Wall |
|
||||||
CPPFLAGS += -Wundef |
|
||||||
#CPPFLAGS += -mshort-calls |
|
||||||
#CPPFLAGS += -fno-unit-at-a-time |
|
||||||
#CPPFLAGS += -Wstrict-prototypes |
|
||||||
#CPPFLAGS += -Wunreachable-code |
|
||||||
#CPPFLAGS += -Wsign-compare |
|
||||||
#CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) |
|
||||||
CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) |
|
||||||
#CPPFLAGS += $(CSTANDARD) |
|
||||||
|
|
||||||
|
|
||||||
#---------------- Assembler Options ---------------- |
|
||||||
# -Wa,...: tell GCC to pass this to the assembler. |
|
||||||
# -adhlns: create listing |
|
||||||
# -gstabs: have the assembler create line number information; note that |
|
||||||
# for use in COFF files, additional information about filenames |
|
||||||
# and function names needs to be present in the assembler source |
|
||||||
# files -- see avr-libc docs [FIXME: not yet described there] |
|
||||||
# -listing-cont-lines: Sets the maximum number of continuation lines of hex |
|
||||||
# dump that will be displayed for a given single line of source input. |
|
||||||
ASFLAGS = $(ADEFS) |
|
||||||
#ASFLAGS += -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 |
|
||||||
|
|
||||||
|
|
||||||
#---------------- Library Options ---------------- |
|
||||||
# Minimalistic printf version |
|
||||||
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min |
|
||||||
|
|
||||||
# Floating point printf version (requires MATH_LIB = -lm below) |
|
||||||
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt |
|
||||||
|
|
||||||
# If this is left blank, then it will use the Standard printf version. |
|
||||||
PRINTF_LIB = |
|
||||||
#PRINTF_LIB = $(PRINTF_LIB_MIN) |
|
||||||
#PRINTF_LIB = $(PRINTF_LIB_FLOAT) |
|
||||||
|
|
||||||
|
|
||||||
# Minimalistic scanf version |
|
||||||
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min |
|
||||||
|
|
||||||
# Floating point + %[ scanf version (requires MATH_LIB = -lm below) |
|
||||||
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt |
|
||||||
|
|
||||||
# If this is left blank, then it will use the Standard scanf version. |
|
||||||
SCANF_LIB = |
|
||||||
#SCANF_LIB = $(SCANF_LIB_MIN) |
|
||||||
#SCANF_LIB = $(SCANF_LIB_FLOAT) |
|
||||||
|
|
||||||
|
|
||||||
MATH_LIB = -lm |
|
||||||
|
|
||||||
|
|
||||||
# List any extra directories to look for libraries here. |
|
||||||
# Each directory must be seperated by a space. |
|
||||||
# Use forward slashes for directory separators. |
|
||||||
# For a directory that has spaces, enclose it in quotes. |
|
||||||
EXTRALIBDIRS = |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#---------------- External Memory Options ---------------- |
|
||||||
|
|
||||||
# 64 KB of external RAM, starting after internal RAM (ATmega128!), |
|
||||||
# used for variables (.data/.bss) and heap (malloc()). |
|
||||||
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff |
|
||||||
|
|
||||||
# 64 KB of external RAM, starting after internal RAM (ATmega128!), |
|
||||||
# only used for heap (malloc()). |
|
||||||
#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff |
|
||||||
|
|
||||||
EXTMEMOPTS = |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#---------------- Linker Options ---------------- |
|
||||||
# -Wl,...: tell GCC to pass this to linker. |
|
||||||
# -Map: create map file |
|
||||||
# --cref: add cross reference to map file |
|
||||||
#LDFLAGS = -Wl,-Map=$(TARGET).map,--cref |
|
||||||
LDFLAGS += -Wl,--relax |
|
||||||
LDFLAGS += -Wl,--gc-sections |
|
||||||
LDFLAGS += $(EXTMEMOPTS) |
|
||||||
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) |
|
||||||
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB) |
|
||||||
#LDFLAGS += -T linker_script.x |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#---------------- Programming Options (avrdude) ---------------- |
|
||||||
|
|
||||||
# Programming hardware |
|
||||||
# Type: avrdude -c ? |
|
||||||
# to get a full listing. |
|
||||||
# |
|
||||||
AVRDUDE_PROGRAMMER = jtagmkII |
|
||||||
|
|
||||||
# com1 = serial port. Use lpt1 to connect to parallel port. |
|
||||||
AVRDUDE_PORT = usb |
|
||||||
|
|
||||||
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex |
|
||||||
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep |
|
||||||
|
|
||||||
|
|
||||||
# Uncomment the following if you want avrdude's erase cycle counter. |
|
||||||
# Note that this counter needs to be initialized first using -Yn, |
|
||||||
# see avrdude manual. |
|
||||||
#AVRDUDE_ERASE_COUNTER = -y |
|
||||||
|
|
||||||
# Uncomment the following if you do /not/ wish a verification to be |
|
||||||
# performed after programming the device. |
|
||||||
#AVRDUDE_NO_VERIFY = -V |
|
||||||
|
|
||||||
# Increase verbosity level. Please use this when submitting bug |
|
||||||
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> |
|
||||||
# to submit bug reports. |
|
||||||
#AVRDUDE_VERBOSE = -v -v |
|
||||||
|
|
||||||
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) |
|
||||||
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY) |
|
||||||
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE) |
|
||||||
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER) |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#---------------- Debugging Options ---------------- |
|
||||||
|
|
||||||
# For simulavr only - target MCU frequency. |
|
||||||
DEBUG_MFREQ = $(F_CPU) |
|
||||||
|
|
||||||
# Set the DEBUG_UI to either gdb or insight. |
|
||||||
# DEBUG_UI = gdb |
|
||||||
DEBUG_UI = insight |
|
||||||
|
|
||||||
# Set the debugging back-end to either avarice, simulavr. |
|
||||||
DEBUG_BACKEND = avarice |
|
||||||
#DEBUG_BACKEND = simulavr |
|
||||||
|
|
||||||
# GDB Init Filename. |
|
||||||
GDBINIT_FILE = __avr_gdbinit |
|
||||||
|
|
||||||
# When using avarice settings for the JTAG |
|
||||||
JTAG_DEV = /dev/com1 |
|
||||||
|
|
||||||
# Debugging port used to communicate between GDB / avarice / simulavr. |
|
||||||
DEBUG_PORT = 4242 |
|
||||||
|
|
||||||
# Debugging host used to communicate between GDB / avarice / simulavr, normally |
|
||||||
# just set to localhost unless doing some sort of crazy debugging when |
|
||||||
# avarice is running on a different computer. |
|
||||||
DEBUG_HOST = localhost |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#============================================================================ |
|
||||||
|
|
||||||
|
|
||||||
# Define programs and commands. |
|
||||||
SHELL = sh |
|
||||||
CC = avr-gcc |
|
||||||
OBJCOPY = avr-objcopy |
|
||||||
OBJDUMP = avr-objdump |
|
||||||
SIZE = avr-size |
|
||||||
AR = avr-ar rcs |
|
||||||
NM = avr-nm |
|
||||||
AVRDUDE = avrdude |
|
||||||
REMOVE = rm -f |
|
||||||
REMOVEDIR = rm -rf |
|
||||||
COPY = cp |
|
||||||
WINSHELL = cmd |
|
||||||
|
|
||||||
|
|
||||||
# Define Messages |
|
||||||
# English |
|
||||||
MSG_ERRORS_NONE = Errors: none |
|
||||||
MSG_BEGIN = -------- begin -------- |
|
||||||
MSG_END = -------- end -------- |
|
||||||
MSG_SIZE_BEFORE = Size before: |
|
||||||
MSG_SIZE_AFTER = Size after: |
|
||||||
MSG_COFF = Converting to AVR COFF: |
|
||||||
MSG_EXTENDED_COFF = Converting to AVR Extended COFF: |
|
||||||
MSG_FLASH = Creating load file for Flash: |
|
||||||
MSG_EEPROM = Creating load file for EEPROM: |
|
||||||
MSG_EXTENDED_LISTING = Creating Extended Listing: |
|
||||||
MSG_SYMBOL_TABLE = Creating Symbol Table: |
|
||||||
MSG_LINKING = Linking: |
|
||||||
MSG_COMPILING = Compiling C: |
|
||||||
MSG_COMPILING_CPP = Compiling C++: |
|
||||||
MSG_ASSEMBLING = Assembling: |
|
||||||
MSG_CLEANING = Cleaning project: |
|
||||||
MSG_CREATING_LIBRARY = Creating library: |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Define all object files. |
|
||||||
OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) |
|
||||||
|
|
||||||
# Define all listing files. |
|
||||||
LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) |
|
||||||
|
|
||||||
|
|
||||||
# Compiler flags to generate dependency files. |
|
||||||
#GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d |
|
||||||
|
|
||||||
|
|
||||||
# Combine all necessary flags and optional flags. |
|
||||||
# Add target processor to flags. |
|
||||||
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS) |
|
||||||
ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS) |
|
||||||
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Default target. |
|
||||||
all: begin gccversion sizebefore build sizeafter end |
|
||||||
|
|
||||||
# Change the build target to build a HEX file or a library. |
|
||||||
build: elf hex eep lss sym |
|
||||||
#build: lib |
|
||||||
|
|
||||||
|
|
||||||
elf: $(TARGET).elf |
|
||||||
hex: $(TARGET).hex |
|
||||||
eep: $(TARGET).eep |
|
||||||
lss: $(TARGET).lss |
|
||||||
sym: $(TARGET).sym |
|
||||||
LIBNAME=lib$(TARGET).a |
|
||||||
lib: $(LIBNAME) |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Eye candy. |
|
||||||
# AVR Studio 3.x does not check make's exit code but relies on |
|
||||||
# the following magic strings to be generated by the compile job. |
|
||||||
begin: |
|
||||||
@echo |
|
||||||
@echo $(MSG_BEGIN) |
|
||||||
|
|
||||||
end: |
|
||||||
@echo $(MSG_END) |
|
||||||
@echo |
|
||||||
|
|
||||||
|
|
||||||
# Display size of file. |
|
||||||
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex |
|
||||||
ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf |
|
||||||
MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) ) |
|
||||||
FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr ) |
|
||||||
|
|
||||||
|
|
||||||
sizebefore: |
|
||||||
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \ |
|
||||||
2>/dev/null; echo; fi |
|
||||||
|
|
||||||
sizeafter: |
|
||||||
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ |
|
||||||
2>/dev/null; echo; fi |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Display compiler version information. |
|
||||||
gccversion : |
|
||||||
@$(CC) --version |
|
||||||
|
|
||||||
|
|
||||||
# Program the device. |
|
||||||
program: $(TARGET).hex $(TARGET).eep |
|
||||||
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) |
|
||||||
|
|
||||||
flip: $(TARGET).hex |
|
||||||
batchisp -hardware usb -device $(MCU) -operation erase f |
|
||||||
batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program |
|
||||||
batchisp -hardware usb -device $(MCU) -operation start reset 0 |
|
||||||
|
|
||||||
dfu: $(TARGET).hex |
|
||||||
dfu-programmer $(MCU) erase |
|
||||||
dfu-programmer $(MCU) flash $(TARGET).hex |
|
||||||
dfu-programmer $(MCU) reset |
|
||||||
|
|
||||||
flip-ee: $(TARGET).hex $(TARGET).eep |
|
||||||
$(COPY) $(TARGET).eep $(TARGET)eep.hex |
|
||||||
batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase |
|
||||||
batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program |
|
||||||
batchisp -hardware usb -device $(MCU) -operation start reset 0 |
|
||||||
$(REMOVE) $(TARGET)eep.hex |
|
||||||
|
|
||||||
dfu-ee: $(TARGET).hex $(TARGET).eep |
|
||||||
dfu-programmer $(MCU) eeprom-flash $(TARGET).eep |
|
||||||
dfu-programmer $(MCU) reset |
|
||||||
|
|
||||||
|
|
||||||
# Generate avr-gdb config/init file which does the following: |
|
||||||
# define the reset signal, load the target file, connect to target, and set |
|
||||||
# a breakpoint at main(). |
|
||||||
gdb-config: |
|
||||||
@$(REMOVE) $(GDBINIT_FILE) |
|
||||||
@echo define reset >> $(GDBINIT_FILE) |
|
||||||
@echo SIGNAL SIGHUP >> $(GDBINIT_FILE) |
|
||||||
@echo end >> $(GDBINIT_FILE) |
|
||||||
@echo file $(TARGET).elf >> $(GDBINIT_FILE) |
|
||||||
@echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE) |
|
||||||
ifeq ($(DEBUG_BACKEND),simulavr) |
|
||||||
@echo load >> $(GDBINIT_FILE) |
|
||||||
endif |
|
||||||
@echo break main >> $(GDBINIT_FILE) |
|
||||||
|
|
||||||
debug: gdb-config $(TARGET).elf |
|
||||||
ifeq ($(DEBUG_BACKEND), avarice) |
|
||||||
@echo Starting AVaRICE - Press enter when "waiting to connect" message displays. |
|
||||||
@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \ |
|
||||||
$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT) |
|
||||||
@$(WINSHELL) /c pause |
|
||||||
|
|
||||||
else |
|
||||||
@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \ |
|
||||||
$(DEBUG_MFREQ) --port $(DEBUG_PORT) |
|
||||||
endif |
|
||||||
@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE) |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. |
|
||||||
COFFCONVERT = $(OBJCOPY) --debugging |
|
||||||
COFFCONVERT += --change-section-address .data-0x800000 |
|
||||||
COFFCONVERT += --change-section-address .bss-0x800000 |
|
||||||
COFFCONVERT += --change-section-address .noinit-0x800000 |
|
||||||
COFFCONVERT += --change-section-address .eeprom-0x810000 |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
coff: $(TARGET).elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_COFF) $(TARGET).cof |
|
||||||
$(COFFCONVERT) -O coff-avr $< $(TARGET).cof |
|
||||||
|
|
||||||
|
|
||||||
extcoff: $(TARGET).elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_EXTENDED_COFF) $(TARGET).cof |
|
||||||
$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Create final output files (.hex, .eep) from ELF output file. |
|
||||||
%.hex: %.elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_FLASH) $@ |
|
||||||
$(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock $< $@ |
|
||||||
|
|
||||||
%.eep: %.elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_EEPROM) $@ |
|
||||||
-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ |
|
||||||
--change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0 |
|
||||||
|
|
||||||
# Create extended listing file from ELF output file. |
|
||||||
%.lss: %.elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_EXTENDED_LISTING) $@ |
|
||||||
$(OBJDUMP) -h -S -z $< > $@ |
|
||||||
|
|
||||||
# Create a symbol table from ELF output file. |
|
||||||
%.sym: %.elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_SYMBOL_TABLE) $@ |
|
||||||
$(NM) -n $< > $@ |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Create library from object files. |
|
||||||
.SECONDARY : $(TARGET).a |
|
||||||
.PRECIOUS : $(OBJ) |
|
||||||
%.a: $(OBJ) |
|
||||||
@echo |
|
||||||
@echo $(MSG_CREATING_LIBRARY) $@ |
|
||||||
$(AR) $@ $(OBJ) |
|
||||||
|
|
||||||
|
|
||||||
# Link: create ELF output file from object files. |
|
||||||
.SECONDARY : $(TARGET).elf |
|
||||||
.PRECIOUS : $(OBJ) |
|
||||||
%.elf: $(OBJ) |
|
||||||
@echo |
|
||||||
@echo $(MSG_LINKING) $@ |
|
||||||
$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS) |
|
||||||
|
|
||||||
|
|
||||||
# Compile: create object files from C source files. |
|
||||||
$(OBJDIR)/%.o : %.c |
|
||||||
@echo |
|
||||||
@echo $(MSG_COMPILING) $< |
|
||||||
$(CC) -c $(ALL_CFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Compile: create object files from C++ source files. |
|
||||||
$(OBJDIR)/%.o : %.cpp |
|
||||||
@echo |
|
||||||
@echo $(MSG_COMPILING_CPP) $< |
|
||||||
$(CC) -c $(ALL_CPPFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Compile: create assembler files from C source files. |
|
||||||
%.s : %.c |
|
||||||
$(CC) -S $(ALL_CFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Compile: create assembler files from C++ source files. |
|
||||||
%.s : %.cpp |
|
||||||
$(CC) -S $(ALL_CPPFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Assemble: create object files from assembler source files. |
|
||||||
$(OBJDIR)/%.o : %.S |
|
||||||
@echo |
|
||||||
@echo $(MSG_ASSEMBLING) $< |
|
||||||
$(CC) -c $(ALL_ASFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Create preprocessed source for use in sending a bug report. |
|
||||||
%.i : %.c |
|
||||||
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Target: clean project. |
|
||||||
clean: begin clean_list end |
|
||||||
|
|
||||||
clean_list : |
|
||||||
@echo |
|
||||||
@echo $(MSG_CLEANING) |
|
||||||
$(REMOVE) $(TARGET).hex |
|
||||||
$(REMOVE) $(TARGET).eep |
|
||||||
$(REMOVE) $(TARGET).cof |
|
||||||
$(REMOVE) $(TARGET).elf |
|
||||||
$(REMOVE) $(TARGET).map |
|
||||||
$(REMOVE) $(TARGET).sym |
|
||||||
$(REMOVE) $(TARGET).lss |
|
||||||
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) |
|
||||||
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) |
|
||||||
$(REMOVE) $(SRC:.c=.s) |
|
||||||
$(REMOVE) $(SRC:.c=.d) |
|
||||||
$(REMOVE) $(SRC:.c=.i) |
|
||||||
$(REMOVEDIR) .dep |
|
||||||
|
|
||||||
doxygen: |
|
||||||
@echo Generating Project Documentation \($(TARGET)\)... |
|
||||||
@if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ |
|
||||||
exit 1; \ |
|
||||||
fi; |
|
||||||
@echo Documentation Generation Complete. |
|
||||||
|
|
||||||
clean_doxygen: |
|
||||||
rm -rf Documentation |
|
||||||
|
|
||||||
checksource: |
|
||||||
@for f in $(SRC) $(CPPSRC) $(ASRC); do \ |
|
||||||
if [ -f $$f ]; then \ |
|
||||||
echo "Found Source File: $$f" ; \ |
|
||||||
else \ |
|
||||||
echo "Source File Not Found: $$f" ; \ |
|
||||||
fi; done |
|
||||||
|
|
||||||
|
|
||||||
# Create object files directory |
|
||||||
$(shell mkdir $(OBJDIR) 2>/dev/null) |
|
||||||
|
|
||||||
|
|
||||||
# Include the dependency files. |
|
||||||
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*) |
|
||||||
|
|
||||||
|
|
||||||
# Listing of phony targets. |
|
||||||
.PHONY : all begin finish end sizebefore sizeafter gccversion \ |
|
||||||
build elf hex eep lss sym coff extcoff doxygen clean \ |
|
||||||
clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ |
|
||||||
debug gdb-config checksource |
|
||||||
@ -0,0 +1,34 @@ |
|||||||
|
# |
||||||
|
# LUFA Library |
||||||
|
# Copyright (C) Dean Camera, 2012. |
||||||
|
# |
||||||
|
# dean [at] fourwalledcubicle [dot] com |
||||||
|
# www.lufa-lib.org |
||||||
|
# |
||||||
|
# -------------------------------------- |
||||||
|
# LUFA Project Makefile. |
||||||
|
# -------------------------------------- |
||||||
|
|
||||||
|
MCU = at90usb1287 |
||||||
|
ARCH = AVR8 |
||||||
|
BOARD = NONE |
||||||
|
F_CPU = 8000000 |
||||||
|
|
||||||
|
ifeq ($(ARCH), AVR8) |
||||||
|
F_USB = 8000000 |
||||||
|
else ifeq ($(ARCH), XMEGA) |
||||||
|
F_USB = 48000000 |
||||||
|
else ifeq ($(ARCH), UC3) |
||||||
|
F_USB = 48000000 |
||||||
|
endif |
||||||
|
|
||||||
|
OPTIMIZATION = 1 |
||||||
|
TARGET = Test |
||||||
|
SRC = Test.c Dummy.S $(LUFA_SRC_USB) |
||||||
|
LUFA_PATH = ../../LUFA/ |
||||||
|
CC_FLAGS = |
||||||
|
# TODO: Add warnings and set warnings as errors |
||||||
|
|
||||||
|
# Include LUFA build script makefiles |
||||||
|
include $(LUFA_PATH)/Build/lufa.sources.in |
||||||
|
include $(LUFA_PATH)/Build/lufa.build.in |
||||||
@ -1,487 +0,0 @@ |
|||||||
# Hey Emacs, this is a -*- makefile -*- |
|
||||||
#---------------------------------------------------------------------------- |
|
||||||
# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al. |
|
||||||
# >> Modified for use with the LUFA project. << |
|
||||||
# |
|
||||||
# Released to the Public Domain |
|
||||||
# |
|
||||||
# Additional material for this makefile was written by: |
|
||||||
# Peter Fleury |
|
||||||
# Tim Henigan |
|
||||||
# Colin O'Flynn |
|
||||||
# Reiner Patommel |
|
||||||
# Markus Pfaff |
|
||||||
# Sander Pool |
|
||||||
# Frederik Rouleau |
|
||||||
# Carlos Lamas |
|
||||||
# Dean Camera |
|
||||||
# Opendous Inc. |
|
||||||
# Denver Gingerich |
|
||||||
# |
|
||||||
#---------------------------------------------------------------------------- |
|
||||||
# On command line: |
|
||||||
# |
|
||||||
# make all = Make software. |
|
||||||
# |
|
||||||
# make clean = Clean out built project files. |
|
||||||
# |
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must |
|
||||||
# have dfu-programmer installed). |
|
||||||
# |
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must |
|
||||||
# have Atmel FLIP installed). |
|
||||||
# |
|
||||||
# make doxygen = Generate DoxyGen documentation for the project (must have |
|
||||||
# DoxyGen installed) |
|
||||||
# |
|
||||||
# make filename.s = Just compile filename.c into the assembler code only. |
|
||||||
# |
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting |
|
||||||
# bug reports to the GCC project. |
|
||||||
# |
|
||||||
# To rebuild project do "make clean" then "make all". |
|
||||||
#---------------------------------------------------------------------------- |
|
||||||
|
|
||||||
|
|
||||||
# MCU name |
|
||||||
MCU = uc3a3256 |
|
||||||
|
|
||||||
|
|
||||||
# Targeted chip architecture (see library "Architectures" documentation) |
|
||||||
ARCH = UC3 |
|
||||||
|
|
||||||
|
|
||||||
# Target board (see library "Board Types" documentation, NONE for projects not requiring |
|
||||||
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called |
|
||||||
# "Board" inside the application directory. |
|
||||||
BOARD = NONE |
|
||||||
|
|
||||||
|
|
||||||
# Processor frequency. |
|
||||||
# This will define a symbol, F_CPU, in all source code files equal to the |
|
||||||
# processor frequency in Hz. You can then use this symbol in your source code to |
|
||||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done |
|
||||||
# automatically to create a 32-bit value in your source code. |
|
||||||
# |
|
||||||
# This should be the frequency the system core runs at, after the system clock |
|
||||||
# has been set up correctly and started. |
|
||||||
F_CPU = 12000000 |
|
||||||
|
|
||||||
|
|
||||||
# USB controller master clock frequency. |
|
||||||
# This will define a symbol, F_USB, in all source code files equal to the |
|
||||||
# input clock frequency of the USB controller's clock generator in Hz. |
|
||||||
# |
|
||||||
# For the UC3 chips, this should be equal to 48MHz or 96MHz. |
|
||||||
F_USB = 48000000 |
|
||||||
|
|
||||||
|
|
||||||
# Output format. (can be srec, ihex, binary) |
|
||||||
FORMAT = ihex |
|
||||||
|
|
||||||
|
|
||||||
# Target file name (without extension). |
|
||||||
TARGET = Test |
|
||||||
|
|
||||||
|
|
||||||
# Object files directory |
|
||||||
# To put object files in current directory, use a dot (.), do NOT make |
|
||||||
# this an empty or blank macro! |
|
||||||
OBJDIR = . |
|
||||||
|
|
||||||
|
|
||||||
# Path to the LUFA library |
|
||||||
LUFA_PATH = ../.. |
|
||||||
|
|
||||||
|
|
||||||
# LUFA library compile-time options and predefined tokens (add '-D' before each token) |
|
||||||
LUFA_OPTS = |
|
||||||
|
|
||||||
|
|
||||||
# Create the LUFA source path variables by including the LUFA root makefile |
|
||||||
include $(LUFA_PATH)/LUFA/makefile |
|
||||||
|
|
||||||
|
|
||||||
# List C source files here. (C dependencies are automatically generated.) |
|
||||||
SRC = Test.c \ |
|
||||||
$(LUFA_SRC_USB) |
|
||||||
|
|
||||||
|
|
||||||
# List C++ source files here. (C dependencies are automatically generated.) |
|
||||||
CPPSRC = |
|
||||||
|
|
||||||
|
|
||||||
# List Assembler source files here. |
|
||||||
# Make them always end in a capital .S. Files ending in a lowercase .s |
|
||||||
# will not be considered source files but generated files (assembler |
|
||||||
# output from the compiler), and will be deleted upon "make clean"! |
|
||||||
# Even though the DOS/Win* filesystem matches both .s and .S the same, |
|
||||||
# it will preserve the spelling of the filenames, and gcc itself does |
|
||||||
# care about how the name is spelled on its command-line. |
|
||||||
ASRC = Dummy.S |
|
||||||
|
|
||||||
|
|
||||||
# Optimization level, can be [0, 1, 2, 3, s]. |
|
||||||
# 0 = turn off optimization. s = optimize for size. |
|
||||||
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) |
|
||||||
OPT = 1 |
|
||||||
|
|
||||||
|
|
||||||
# List any extra directories to look for include files here. |
|
||||||
# Each directory must be seperated by a space. |
|
||||||
# Use forward slashes for directory separators. |
|
||||||
# For a directory that has spaces, enclose it in quotes. |
|
||||||
EXTRAINCDIRS = $(LUFA_PATH)/ |
|
||||||
|
|
||||||
|
|
||||||
# Compiler flag to set the C Standard level. |
|
||||||
# c89 = "ANSI" C |
|
||||||
# gnu89 = c89 plus GCC extensions |
|
||||||
# c99 = ISO C99 standard (not yet fully implemented) |
|
||||||
# gnu99 = c99 plus GCC extensions |
|
||||||
CSTANDARD = -std=gnu99 |
|
||||||
|
|
||||||
|
|
||||||
# Place -D or -U options here for C sources |
|
||||||
CDEFS = -DF_CPU=$(F_CPU)UL |
|
||||||
CDEFS += -DF_USB=$(F_USB)UL |
|
||||||
CDEFS += -DBOARD=BOARD_$(BOARD) |
|
||||||
CDEFS += -DARCH=ARCH_$(ARCH) |
|
||||||
CDEFS += $(LUFA_OPTS) |
|
||||||
|
|
||||||
|
|
||||||
# Place -D or -U options here for ASM sources |
|
||||||
ADEFS = -DF_CPU=$(F_CPU) |
|
||||||
ADEFS += -DF_USB=$(F_USB)UL |
|
||||||
ADEFS += -DBOARD=BOARD_$(BOARD) |
|
||||||
ADEFS += -DARCH=ARCH_$(ARCH) |
|
||||||
ADEFS += $(LUFA_OPTS) |
|
||||||
|
|
||||||
# Place -D or -U options here for C++ sources |
|
||||||
CPPDEFS = -DF_CPU=$(F_CPU)UL |
|
||||||
CPPDEFS += -DF_USB=$(F_USB)UL |
|
||||||
CPPDEFS += -DBOARD=BOARD_$(BOARD) |
|
||||||
CPPDEFS += -DARCH=ARCH_$(ARCH) |
|
||||||
CPPDEFS += $(LUFA_OPTS) |
|
||||||
|
|
||||||
|
|
||||||
# Debugging level. |
|
||||||
DEBUG = 3 |
|
||||||
|
|
||||||
|
|
||||||
#---------------- Compiler Options C ---------------- |
|
||||||
# -g*: generate debugging information |
|
||||||
# -O*: optimization level |
|
||||||
# -f...: tuning, see GCC manual and avr-libc documentation |
|
||||||
# -Wall...: warning level |
|
||||||
# -Wa,...: tell GCC to pass this to the assembler. |
|
||||||
# -adhlns...: create assembler listing |
|
||||||
CFLAGS = -g$(DEBUG) |
|
||||||
CFLAGS += $(CDEFS) |
|
||||||
CFLAGS += -O$(OPT) |
|
||||||
CFLAGS += -funsigned-char |
|
||||||
CFLAGS += -funsigned-bitfields |
|
||||||
CFLAGS += -ffunction-sections |
|
||||||
CFLAGS += -fno-strict-aliasing |
|
||||||
CFLAGS += -Wall |
|
||||||
CFLAGS += -Wstrict-prototypes |
|
||||||
CFLAGS += -masm-addr-pseudos |
|
||||||
#CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) |
|
||||||
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) |
|
||||||
CFLAGS += $(CSTANDARD) |
|
||||||
|
|
||||||
|
|
||||||
#---------------- Compiler Options C++ ---------------- |
|
||||||
# -g*: generate debugging information |
|
||||||
# -O*: optimization level |
|
||||||
# -f...: tuning, see GCC manual and avr-libc documentation |
|
||||||
# -Wall...: warning level |
|
||||||
# -Wa,...: tell GCC to pass this to the assembler. |
|
||||||
# -adhlns...: create assembler listing |
|
||||||
CPPFLAGS = -g$(DEBUG) |
|
||||||
CPPFLAGS += $(CPPDEFS) |
|
||||||
CPPFLAGS += -O$(OPT) |
|
||||||
CPPFLAGS += -funsigned-char |
|
||||||
CPPFLAGS += -funsigned-bitfields |
|
||||||
CPPFLAGS += -ffunction-sections |
|
||||||
CPPFLAGS += -fno-strict-aliasing |
|
||||||
CPPFLAGS += -fno-exceptions |
|
||||||
CPPFLAGS += -masm-addr-pseudos |
|
||||||
CPPFLAGS += -Wall |
|
||||||
CPPFLAGS += -Wundef |
|
||||||
#CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) |
|
||||||
CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) |
|
||||||
#CPPFLAGS += $(CSTANDARD) |
|
||||||
|
|
||||||
|
|
||||||
#---------------- Assembler Options ---------------- |
|
||||||
# -Wa,...: tell GCC to pass this to the assembler. |
|
||||||
# -adhlns: create listing |
|
||||||
# -gstabs: have the assembler create line number information; note that |
|
||||||
# for use in COFF files, additional information about filenames |
|
||||||
# and function names needs to be present in the assembler source |
|
||||||
# files -- see avr-libc docs [FIXME: not yet described there] |
|
||||||
# -listing-cont-lines: Sets the maximum number of continuation lines of hex |
|
||||||
# dump that will be displayed for a given single line of source input. |
|
||||||
ASFLAGS = $(ADEFS) |
|
||||||
#ASFLAGS += -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 |
|
||||||
|
|
||||||
|
|
||||||
#---------------- Linker Options ---------------- |
|
||||||
# -Wl,...: tell GCC to pass this to linker. |
|
||||||
# -Map: create map file |
|
||||||
# --cref: add cross reference to map file |
|
||||||
#LDFLAGS = -Wl,-Map=$(TARGET).map,--cref |
|
||||||
LDFLAGS += -Wl,--gc-sections --rodata-writable |
|
||||||
LDFLAGS += -Wl,--direct-data |
|
||||||
#LDFLAGS += -T linker_script.x |
|
||||||
|
|
||||||
|
|
||||||
#============================================================================ |
|
||||||
|
|
||||||
|
|
||||||
# Define programs and commands. |
|
||||||
SHELL = sh |
|
||||||
CC = avr32-gcc |
|
||||||
OBJCOPY = avr32-objcopy |
|
||||||
OBJDUMP = avr32-objdump |
|
||||||
SIZE = avr32-size |
|
||||||
AR = avr32-ar rcs |
|
||||||
NM = avr32-nm |
|
||||||
REMOVE = rm -f |
|
||||||
REMOVEDIR = rm -rf |
|
||||||
COPY = cp |
|
||||||
WINSHELL = cmd |
|
||||||
|
|
||||||
|
|
||||||
# Define Messages |
|
||||||
# English |
|
||||||
MSG_ERRORS_NONE = Errors: none |
|
||||||
MSG_BEGIN = -------- begin -------- |
|
||||||
MSG_END = -------- end -------- |
|
||||||
MSG_SIZE_BEFORE = Size before: |
|
||||||
MSG_SIZE_AFTER = Size after: |
|
||||||
MSG_COFF = Converting to AVR COFF: |
|
||||||
MSG_FLASH = Creating load file for Flash: |
|
||||||
MSG_EEPROM = Creating load file for EEPROM: |
|
||||||
MSG_EXTENDED_LISTING = Creating Extended Listing: |
|
||||||
MSG_SYMBOL_TABLE = Creating Symbol Table: |
|
||||||
MSG_LINKING = Linking: |
|
||||||
MSG_COMPILING = Compiling C: |
|
||||||
MSG_COMPILING_CPP = Compiling C++: |
|
||||||
MSG_ASSEMBLING = Assembling: |
|
||||||
MSG_CLEANING = Cleaning project: |
|
||||||
MSG_CREATING_LIBRARY = Creating library: |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Define all object files. |
|
||||||
OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) |
|
||||||
|
|
||||||
# Define all listing files. |
|
||||||
LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) |
|
||||||
|
|
||||||
|
|
||||||
# Compiler flags to generate dependency files. |
|
||||||
#GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d |
|
||||||
|
|
||||||
|
|
||||||
# Combine all necessary flags and optional flags. |
|
||||||
# Add target processor to flags. |
|
||||||
ALL_CFLAGS = -mpart=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS) |
|
||||||
ALL_CPPFLAGS = -mpart=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS) |
|
||||||
ALL_ASFLAGS = -mpart=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Default target. |
|
||||||
all: begin gccversion sizebefore build sizeafter end |
|
||||||
|
|
||||||
# Change the build target to build a HEX file or a library. |
|
||||||
build: elf hex lss sym |
|
||||||
#build: lib |
|
||||||
|
|
||||||
|
|
||||||
elf: $(TARGET).elf |
|
||||||
hex: $(TARGET).hex |
|
||||||
lss: $(TARGET).lss |
|
||||||
sym: $(TARGET).sym |
|
||||||
LIBNAME=lib$(TARGET).a |
|
||||||
lib: $(LIBNAME) |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Eye candy. |
|
||||||
# AVR Studio 3.x does not check make's exit code but relies on |
|
||||||
# the following magic strings to be generated by the compile job. |
|
||||||
begin: |
|
||||||
@echo |
|
||||||
@echo $(MSG_BEGIN) |
|
||||||
|
|
||||||
end: |
|
||||||
@echo $(MSG_END) |
|
||||||
@echo |
|
||||||
|
|
||||||
|
|
||||||
# Display size of file. |
|
||||||
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex |
|
||||||
ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf |
|
||||||
MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) ) |
|
||||||
FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr ) |
|
||||||
|
|
||||||
|
|
||||||
sizebefore: |
|
||||||
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \ |
|
||||||
2>/dev/null; echo; fi |
|
||||||
|
|
||||||
sizeafter: |
|
||||||
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ |
|
||||||
2>/dev/null; echo; fi |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Display compiler version information. |
|
||||||
gccversion : |
|
||||||
@$(CC) --version |
|
||||||
|
|
||||||
|
|
||||||
# Program the device. |
|
||||||
flip: $(TARGET).hex |
|
||||||
batchisp -hardware usb -device $(MCU) -operation erase f |
|
||||||
batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program |
|
||||||
batchisp -hardware usb -device $(MCU) -operation start reset 0 |
|
||||||
|
|
||||||
dfu: $(TARGET).hex |
|
||||||
dfu-programmer $(MCU) erase |
|
||||||
dfu-programmer $(MCU) flash $(TARGET).hex |
|
||||||
dfu-programmer $(MCU) reset |
|
||||||
|
|
||||||
|
|
||||||
# Create final output files (.hex, .eep) from ELF output file. |
|
||||||
%.hex: %.elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_FLASH) $@ |
|
||||||
$(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature $< $@ |
|
||||||
|
|
||||||
# Create extended listing file from ELF output file. |
|
||||||
%.lss: %.elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_EXTENDED_LISTING) $@ |
|
||||||
$(OBJDUMP) -h -S -z $< > $@ |
|
||||||
|
|
||||||
# Create a symbol table from ELF output file. |
|
||||||
%.sym: %.elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_SYMBOL_TABLE) $@ |
|
||||||
$(NM) -n $< > $@ |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Create library from object files. |
|
||||||
.SECONDARY : $(TARGET).a |
|
||||||
.PRECIOUS : $(OBJ) |
|
||||||
%.a: $(OBJ) |
|
||||||
@echo |
|
||||||
@echo $(MSG_CREATING_LIBRARY) $@ |
|
||||||
$(AR) $@ $(OBJ) |
|
||||||
|
|
||||||
|
|
||||||
# Link: create ELF output file from object files. |
|
||||||
.SECONDARY : $(TARGET).elf |
|
||||||
.PRECIOUS : $(OBJ) |
|
||||||
%.elf: $(OBJ) |
|
||||||
@echo |
|
||||||
@echo $(MSG_LINKING) $@ |
|
||||||
$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS) |
|
||||||
|
|
||||||
|
|
||||||
# Compile: create object files from C source files. |
|
||||||
$(OBJDIR)/%.o : %.c |
|
||||||
@echo |
|
||||||
@echo $(MSG_COMPILING) $< |
|
||||||
$(CC) -c $(ALL_CFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Compile: create object files from C++ source files. |
|
||||||
$(OBJDIR)/%.o : %.cpp |
|
||||||
@echo |
|
||||||
@echo $(MSG_COMPILING_CPP) $< |
|
||||||
$(CC) -c $(ALL_CPPFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Compile: create assembler files from C source files. |
|
||||||
%.s : %.c |
|
||||||
$(CC) -S $(ALL_CFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Compile: create assembler files from C++ source files. |
|
||||||
%.s : %.cpp |
|
||||||
$(CC) -S $(ALL_CPPFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Assemble: create object files from assembler source files. |
|
||||||
$(OBJDIR)/%.o : %.S |
|
||||||
@echo |
|
||||||
@echo $(MSG_ASSEMBLING) $< |
|
||||||
$(CC) -c $(ALL_ASFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Create preprocessed source for use in sending a bug report. |
|
||||||
%.i : %.c |
|
||||||
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Target: clean project. |
|
||||||
clean: begin clean_list end |
|
||||||
|
|
||||||
clean_list : |
|
||||||
@echo |
|
||||||
@echo $(MSG_CLEANING) |
|
||||||
$(REMOVE) $(TARGET).hex |
|
||||||
$(REMOVE) $(TARGET).cof |
|
||||||
$(REMOVE) $(TARGET).elf |
|
||||||
$(REMOVE) $(TARGET).map |
|
||||||
$(REMOVE) $(TARGET).sym |
|
||||||
$(REMOVE) $(TARGET).lss |
|
||||||
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) |
|
||||||
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) |
|
||||||
$(REMOVE) $(SRC:.c=.s) |
|
||||||
$(REMOVE) $(SRC:.c=.d) |
|
||||||
$(REMOVE) $(SRC:.c=.i) |
|
||||||
$(REMOVEDIR) .dep |
|
||||||
|
|
||||||
doxygen: |
|
||||||
@echo Generating Project Documentation \($(TARGET)\)... |
|
||||||
@if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ |
|
||||||
exit 1; \ |
|
||||||
fi; |
|
||||||
@echo Documentation Generation Complete. |
|
||||||
|
|
||||||
clean_doxygen: |
|
||||||
rm -rf Documentation |
|
||||||
|
|
||||||
checksource: |
|
||||||
@for f in $(SRC) $(CPPSRC) $(ASRC); do \ |
|
||||||
if [ -f $$f ]; then \ |
|
||||||
echo "Found Source File: $$f" ; \ |
|
||||||
else \ |
|
||||||
echo "Source File Not Found: $$f" ; \ |
|
||||||
fi; done |
|
||||||
|
|
||||||
|
|
||||||
# Create object files directory |
|
||||||
$(shell mkdir $(OBJDIR) 2>/dev/null) |
|
||||||
|
|
||||||
|
|
||||||
# Include the dependency files. |
|
||||||
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*) |
|
||||||
|
|
||||||
|
|
||||||
# Listing of phony targets. |
|
||||||
.PHONY : all begin finish end sizebefore sizeafter gccversion \ |
|
||||||
build elf hex lss sym doxygen clean clean_list clean_doxygen \ |
|
||||||
dfu flip checksource |
|
||||||
|
|
||||||
@ -1,706 +0,0 @@ |
|||||||
# Hey Emacs, this is a -*- makefile -*- |
|
||||||
#---------------------------------------------------------------------------- |
|
||||||
# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al. |
|
||||||
# >> Modified for use with the LUFA project. << |
|
||||||
# |
|
||||||
# Released to the Public Domain |
|
||||||
# |
|
||||||
# Additional material for this makefile was written by: |
|
||||||
# Peter Fleury |
|
||||||
# Tim Henigan |
|
||||||
# Colin O'Flynn |
|
||||||
# Reiner Patommel |
|
||||||
# Markus Pfaff |
|
||||||
# Sander Pool |
|
||||||
# Frederik Rouleau |
|
||||||
# Carlos Lamas |
|
||||||
# Dean Camera |
|
||||||
# Opendous Inc. |
|
||||||
# Denver Gingerich |
|
||||||
# |
|
||||||
#---------------------------------------------------------------------------- |
|
||||||
# On command line: |
|
||||||
# |
|
||||||
# make all = Make software. |
|
||||||
# |
|
||||||
# make clean = Clean out built project files. |
|
||||||
# |
|
||||||
# make coff = Convert ELF to AVR COFF. |
|
||||||
# |
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF. |
|
||||||
# |
|
||||||
# make program = Download the hex file to the device, using avrdude. |
|
||||||
# Please customize the avrdude settings below first! |
|
||||||
# |
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must |
|
||||||
# have dfu-programmer installed). |
|
||||||
# |
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must |
|
||||||
# have Atmel FLIP installed). |
|
||||||
# |
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer |
|
||||||
# (must have dfu-programmer installed). |
|
||||||
# |
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP |
|
||||||
# (must have Atmel FLIP installed). |
|
||||||
# |
|
||||||
# make doxygen = Generate DoxyGen documentation for the project (must have |
|
||||||
# DoxyGen installed) |
|
||||||
# |
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging, |
|
||||||
# with avr-gdb or avr-insight as the front end for debugging. |
|
||||||
# |
|
||||||
# make filename.s = Just compile filename.c into the assembler code only. |
|
||||||
# |
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting |
|
||||||
# bug reports to the GCC project. |
|
||||||
# |
|
||||||
# To rebuild project do "make clean" then "make all". |
|
||||||
#---------------------------------------------------------------------------- |
|
||||||
|
|
||||||
|
|
||||||
# MCU name |
|
||||||
MCU = atxmega128a1u |
|
||||||
|
|
||||||
|
|
||||||
# Targeted chip architecture (see library "Architectures" documentation) |
|
||||||
ARCH = XMEGA |
|
||||||
|
|
||||||
|
|
||||||
# Target board (see library "Board Types" documentation, NONE for projects not requiring |
|
||||||
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called |
|
||||||
# "Board" inside the application directory. |
|
||||||
BOARD = NONE |
|
||||||
|
|
||||||
|
|
||||||
# Processor frequency. |
|
||||||
# This will define a symbol, F_CPU, in all source code files equal to the |
|
||||||
# processor frequency in Hz. You can then use this symbol in your source code to |
|
||||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done |
|
||||||
# automatically to create a 32-bit value in your source code. |
|
||||||
# |
|
||||||
# This should be the frequency the system core runs at, after the system clock |
|
||||||
# has been set up correctly and started. |
|
||||||
F_CPU = 24000000 |
|
||||||
|
|
||||||
|
|
||||||
# USB controller master clock frequency. |
|
||||||
# This will define a symbol, F_USB, in all source code files equal to the |
|
||||||
# input clock frequency of the USB controller's clock generator in Hz. |
|
||||||
# |
|
||||||
# For the XMEGA chips, this should be equal to a multiple of 6MHz for Low |
|
||||||
# Speed USB mode, or a multiple of 48MHz for Full Speed USB mode. |
|
||||||
F_USB = 48000000 |
|
||||||
|
|
||||||
|
|
||||||
# Output format. (can be srec, ihex, binary) |
|
||||||
FORMAT = ihex |
|
||||||
|
|
||||||
|
|
||||||
# Target file name (without extension). |
|
||||||
TARGET = Test |
|
||||||
|
|
||||||
|
|
||||||
# Object files directory |
|
||||||
# To put object files in current directory, use a dot (.), do NOT make |
|
||||||
# this an empty or blank macro! |
|
||||||
OBJDIR = . |
|
||||||
|
|
||||||
|
|
||||||
# Path to the LUFA library |
|
||||||
LUFA_PATH = ../.. |
|
||||||
|
|
||||||
|
|
||||||
# LUFA library compile-time options and predefined tokens |
|
||||||
LUFA_OPTS = |
|
||||||
|
|
||||||
|
|
||||||
# Create the LUFA source path variables by including the LUFA root makefile |
|
||||||
include $(LUFA_PATH)/LUFA/makefile |
|
||||||
|
|
||||||
|
|
||||||
# List C source files here. (C dependencies are automatically generated.) |
|
||||||
SRC = Test.c \ |
|
||||||
$(LUFA_SRC_USB) |
|
||||||
|
|
||||||
|
|
||||||
# List C++ source files here. (C dependencies are automatically generated.) |
|
||||||
CPPSRC = |
|
||||||
|
|
||||||
|
|
||||||
# List Assembler source files here. |
|
||||||
# Make them always end in a capital .S. Files ending in a lowercase .s |
|
||||||
# will not be considered source files but generated files (assembler |
|
||||||
# output from the compiler), and will be deleted upon "make clean"! |
|
||||||
# Even though the DOS/Win* filesystem matches both .s and .S the same, |
|
||||||
# it will preserve the spelling of the filenames, and gcc itself does |
|
||||||
# care about how the name is spelled on its command-line. |
|
||||||
ASRC = Dummy.S |
|
||||||
|
|
||||||
|
|
||||||
# Optimization level, can be [0, 1, 2, 3, s]. |
|
||||||
# 0 = turn off optimization. s = optimize for size. |
|
||||||
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) |
|
||||||
OPT = 1 |
|
||||||
|
|
||||||
|
|
||||||
# List any extra directories to look for include files here. |
|
||||||
# Each directory must be seperated by a space. |
|
||||||
# Use forward slashes for directory separators. |
|
||||||
# For a directory that has spaces, enclose it in quotes. |
|
||||||
EXTRAINCDIRS = $(LUFA_PATH)/ |
|
||||||
|
|
||||||
|
|
||||||
# Compiler flag to set the C Standard level. |
|
||||||
# c89 = "ANSI" C |
|
||||||
# gnu89 = c89 plus GCC extensions |
|
||||||
# c99 = ISO C99 standard (not yet fully implemented) |
|
||||||
# gnu99 = c99 plus GCC extensions |
|
||||||
CSTANDARD = -std=gnu99 |
|
||||||
|
|
||||||
|
|
||||||
# Place -D or -U options here for C sources |
|
||||||
CDEFS = -DF_CPU=$(F_CPU)UL |
|
||||||
CDEFS += -DF_USB=$(F_USB)UL |
|
||||||
CDEFS += -DBOARD=BOARD_$(BOARD) |
|
||||||
CDEFS += -DARCH=ARCH_$(ARCH) |
|
||||||
CDEFS += $(LUFA_OPTS) |
|
||||||
|
|
||||||
|
|
||||||
# Place -D or -U options here for ASM sources |
|
||||||
ADEFS = -DF_CPU=$(F_CPU) |
|
||||||
ADEFS += -DF_USB=$(F_USB)UL |
|
||||||
ADEFS += -DBOARD=BOARD_$(BOARD) |
|
||||||
ADEFS += -DARCH=ARCH_$(ARCH) |
|
||||||
ADEFS += $(LUFA_OPTS) |
|
||||||
|
|
||||||
# Place -D or -U options here for C++ sources |
|
||||||
CPPDEFS = -DF_CPU=$(F_CPU)UL |
|
||||||
CPPDEFS += -DF_USB=$(F_USB)UL |
|
||||||
CPPDEFS += -DBOARD=BOARD_$(BOARD) |
|
||||||
CPPDEFS += -DARCH=ARCH_$(ARCH) |
|
||||||
CPPDEFS += $(LUFA_OPTS) |
|
||||||
|
|
||||||
|
|
||||||
# Debugging format. |
|
||||||
# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs. |
|
||||||
# AVR Studio 4.10 requires dwarf-2. |
|
||||||
# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run. |
|
||||||
DEBUG = dwarf-2 |
|
||||||
|
|
||||||
|
|
||||||
#---------------- Compiler Options C ---------------- |
|
||||||
# -g*: generate debugging information |
|
||||||
# -O*: optimization level |
|
||||||
# -f...: tuning, see GCC manual and avr-libc documentation |
|
||||||
# -Wall...: warning level |
|
||||||
# -Wa,...: tell GCC to pass this to the assembler. |
|
||||||
# -adhlns...: create assembler listing |
|
||||||
CFLAGS = -g$(DEBUG) |
|
||||||
CFLAGS += $(CDEFS) |
|
||||||
CFLAGS += -O$(OPT) |
|
||||||
CFLAGS += -funsigned-char |
|
||||||
CFLAGS += -funsigned-bitfields |
|
||||||
CFLAGS += -ffunction-sections |
|
||||||
CFLAGS += -fno-inline-small-functions |
|
||||||
CFLAGS += -fpack-struct |
|
||||||
CFLAGS += -fshort-enums |
|
||||||
CFLAGS += -fno-strict-aliasing |
|
||||||
CFLAGS += -Wall |
|
||||||
CFLAGS += -Wstrict-prototypes |
|
||||||
#CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) |
|
||||||
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) |
|
||||||
CFLAGS += $(CSTANDARD) |
|
||||||
|
|
||||||
|
|
||||||
#---------------- Compiler Options C++ ---------------- |
|
||||||
# -g*: generate debugging information |
|
||||||
# -O*: optimization level |
|
||||||
# -f...: tuning, see GCC manual and avr-libc documentation |
|
||||||
# -Wall...: warning level |
|
||||||
# -Wa,...: tell GCC to pass this to the assembler. |
|
||||||
# -adhlns...: create assembler listing |
|
||||||
CPPFLAGS = -g$(DEBUG) |
|
||||||
CPPFLAGS += $(CPPDEFS) |
|
||||||
CPPFLAGS += -O$(OPT) |
|
||||||
CPPFLAGS += -funsigned-char |
|
||||||
CPPFLAGS += -funsigned-bitfields |
|
||||||
CPPFLAGS += -fpack-struct |
|
||||||
CPPFLAGS += -fshort-enums |
|
||||||
CPPFLAGS += -ffunction-sections |
|
||||||
CPPFLAGS += -fno-strict-aliasing |
|
||||||
CPPFLAGS += -fno-exceptions |
|
||||||
CPPFLAGS += -Wall |
|
||||||
CPPFLAGS += -Wundef |
|
||||||
#CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) |
|
||||||
CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) |
|
||||||
#CPPFLAGS += $(CSTANDARD) |
|
||||||
|
|
||||||
|
|
||||||
#---------------- Assembler Options ---------------- |
|
||||||
# -Wa,...: tell GCC to pass this to the assembler. |
|
||||||
# -adhlns: create listing |
|
||||||
# -gstabs: have the assembler create line number information; note that |
|
||||||
# for use in COFF files, additional information about filenames |
|
||||||
# and function names needs to be present in the assembler source |
|
||||||
# files -- see avr-libc docs [FIXME: not yet described there] |
|
||||||
# -listing-cont-lines: Sets the maximum number of continuation lines of hex |
|
||||||
# dump that will be displayed for a given single line of source input. |
|
||||||
ASFLAGS = $(ADEFS) |
|
||||||
#ASFLAGS += -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 |
|
||||||
|
|
||||||
|
|
||||||
#---------------- Library Options ---------------- |
|
||||||
# Minimalistic printf version |
|
||||||
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min |
|
||||||
|
|
||||||
# Floating point printf version (requires MATH_LIB = -lm below) |
|
||||||
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt |
|
||||||
|
|
||||||
# If this is left blank, then it will use the Standard printf version. |
|
||||||
PRINTF_LIB = |
|
||||||
#PRINTF_LIB = $(PRINTF_LIB_MIN) |
|
||||||
#PRINTF_LIB = $(PRINTF_LIB_FLOAT) |
|
||||||
|
|
||||||
|
|
||||||
# Minimalistic scanf version |
|
||||||
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min |
|
||||||
|
|
||||||
# Floating point + %[ scanf version (requires MATH_LIB = -lm below) |
|
||||||
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt |
|
||||||
|
|
||||||
# If this is left blank, then it will use the Standard scanf version. |
|
||||||
SCANF_LIB = |
|
||||||
#SCANF_LIB = $(SCANF_LIB_MIN) |
|
||||||
#SCANF_LIB = $(SCANF_LIB_FLOAT) |
|
||||||
|
|
||||||
|
|
||||||
MATH_LIB = -lm |
|
||||||
|
|
||||||
|
|
||||||
# List any extra directories to look for libraries here. |
|
||||||
# Each directory must be seperated by a space. |
|
||||||
# Use forward slashes for directory separators. |
|
||||||
# For a directory that has spaces, enclose it in quotes. |
|
||||||
EXTRALIBDIRS = |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#---------------- External Memory Options ---------------- |
|
||||||
|
|
||||||
# 64 KB of external RAM, starting after internal RAM (ATmega128!), |
|
||||||
# used for variables (.data/.bss) and heap (malloc()). |
|
||||||
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff |
|
||||||
|
|
||||||
# 64 KB of external RAM, starting after internal RAM (ATmega128!), |
|
||||||
# only used for heap (malloc()). |
|
||||||
#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff |
|
||||||
|
|
||||||
EXTMEMOPTS = |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#---------------- Linker Options ---------------- |
|
||||||
# -Wl,...: tell GCC to pass this to linker. |
|
||||||
# -Map: create map file |
|
||||||
# --cref: add cross reference to map file |
|
||||||
#LDFLAGS = -Wl,-Map=$(TARGET).map,--cref |
|
||||||
LDFLAGS += -Wl,--relax |
|
||||||
LDFLAGS += -Wl,--gc-sections |
|
||||||
LDFLAGS += $(EXTMEMOPTS) |
|
||||||
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) |
|
||||||
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB) |
|
||||||
#LDFLAGS += -T linker_script.x |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#---------------- Programming Options (avrdude) ---------------- |
|
||||||
|
|
||||||
# Programming hardware |
|
||||||
# Type: avrdude -c ? |
|
||||||
# to get a full listing. |
|
||||||
# |
|
||||||
AVRDUDE_PROGRAMMER = jtagmkII |
|
||||||
|
|
||||||
# com1 = serial port. Use lpt1 to connect to parallel port. |
|
||||||
AVRDUDE_PORT = usb |
|
||||||
|
|
||||||
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex |
|
||||||
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep |
|
||||||
|
|
||||||
|
|
||||||
# Uncomment the following if you want avrdude's erase cycle counter. |
|
||||||
# Note that this counter needs to be initialized first using -Yn, |
|
||||||
# see avrdude manual. |
|
||||||
#AVRDUDE_ERASE_COUNTER = -y |
|
||||||
|
|
||||||
# Uncomment the following if you do /not/ wish a verification to be |
|
||||||
# performed after programming the device. |
|
||||||
#AVRDUDE_NO_VERIFY = -V |
|
||||||
|
|
||||||
# Increase verbosity level. Please use this when submitting bug |
|
||||||
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> |
|
||||||
# to submit bug reports. |
|
||||||
#AVRDUDE_VERBOSE = -v -v |
|
||||||
|
|
||||||
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) |
|
||||||
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY) |
|
||||||
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE) |
|
||||||
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER) |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#---------------- Debugging Options ---------------- |
|
||||||
|
|
||||||
# For simulavr only - target MCU frequency. |
|
||||||
DEBUG_MFREQ = $(F_CPU) |
|
||||||
|
|
||||||
# Set the DEBUG_UI to either gdb or insight. |
|
||||||
# DEBUG_UI = gdb |
|
||||||
DEBUG_UI = insight |
|
||||||
|
|
||||||
# Set the debugging back-end to either avarice, simulavr. |
|
||||||
DEBUG_BACKEND = avarice |
|
||||||
#DEBUG_BACKEND = simulavr |
|
||||||
|
|
||||||
# GDB Init Filename. |
|
||||||
GDBINIT_FILE = __avr_gdbinit |
|
||||||
|
|
||||||
# When using avarice settings for the JTAG |
|
||||||
JTAG_DEV = /dev/com1 |
|
||||||
|
|
||||||
# Debugging port used to communicate between GDB / avarice / simulavr. |
|
||||||
DEBUG_PORT = 4242 |
|
||||||
|
|
||||||
# Debugging host used to communicate between GDB / avarice / simulavr, normally |
|
||||||
# just set to localhost unless doing some sort of crazy debugging when |
|
||||||
# avarice is running on a different computer. |
|
||||||
DEBUG_HOST = localhost |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#============================================================================ |
|
||||||
|
|
||||||
|
|
||||||
# Define programs and commands. |
|
||||||
SHELL = sh |
|
||||||
CC = avr-gcc |
|
||||||
OBJCOPY = avr-objcopy |
|
||||||
OBJDUMP = avr-objdump |
|
||||||
SIZE = avr-size |
|
||||||
AR = avr-ar rcs |
|
||||||
NM = avr-nm |
|
||||||
AVRDUDE = avrdude |
|
||||||
REMOVE = rm -f |
|
||||||
REMOVEDIR = rm -rf |
|
||||||
COPY = cp |
|
||||||
WINSHELL = cmd |
|
||||||
|
|
||||||
|
|
||||||
# Define Messages |
|
||||||
# English |
|
||||||
MSG_ERRORS_NONE = Errors: none |
|
||||||
MSG_BEGIN = -------- begin -------- |
|
||||||
MSG_END = -------- end -------- |
|
||||||
MSG_SIZE_BEFORE = Size before: |
|
||||||
MSG_SIZE_AFTER = Size after: |
|
||||||
MSG_COFF = Converting to AVR COFF: |
|
||||||
MSG_EXTENDED_COFF = Converting to AVR Extended COFF: |
|
||||||
MSG_FLASH = Creating load file for Flash: |
|
||||||
MSG_EEPROM = Creating load file for EEPROM: |
|
||||||
MSG_EXTENDED_LISTING = Creating Extended Listing: |
|
||||||
MSG_SYMBOL_TABLE = Creating Symbol Table: |
|
||||||
MSG_LINKING = Linking: |
|
||||||
MSG_COMPILING = Compiling C: |
|
||||||
MSG_COMPILING_CPP = Compiling C++: |
|
||||||
MSG_ASSEMBLING = Assembling: |
|
||||||
MSG_CLEANING = Cleaning project: |
|
||||||
MSG_CREATING_LIBRARY = Creating library: |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Define all object files. |
|
||||||
OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) |
|
||||||
|
|
||||||
# Define all listing files. |
|
||||||
LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) |
|
||||||
|
|
||||||
|
|
||||||
# Compiler flags to generate dependency files. |
|
||||||
#GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d |
|
||||||
|
|
||||||
|
|
||||||
# Combine all necessary flags and optional flags. |
|
||||||
# Add target processor to flags. |
|
||||||
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS) |
|
||||||
ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS) |
|
||||||
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Default target. |
|
||||||
all: begin gccversion sizebefore build sizeafter end |
|
||||||
|
|
||||||
# Change the build target to build a HEX file or a library. |
|
||||||
build: elf hex eep lss sym |
|
||||||
#build: lib |
|
||||||
|
|
||||||
|
|
||||||
elf: $(TARGET).elf |
|
||||||
hex: $(TARGET).hex |
|
||||||
eep: $(TARGET).eep |
|
||||||
lss: $(TARGET).lss |
|
||||||
sym: $(TARGET).sym |
|
||||||
LIBNAME=lib$(TARGET).a |
|
||||||
lib: $(LIBNAME) |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Eye candy. |
|
||||||
# AVR Studio 3.x does not check make's exit code but relies on |
|
||||||
# the following magic strings to be generated by the compile job. |
|
||||||
begin: |
|
||||||
@echo |
|
||||||
@echo $(MSG_BEGIN) |
|
||||||
|
|
||||||
end: |
|
||||||
@echo $(MSG_END) |
|
||||||
@echo |
|
||||||
|
|
||||||
|
|
||||||
# Display size of file. |
|
||||||
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex |
|
||||||
ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf |
|
||||||
MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) ) |
|
||||||
FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr ) |
|
||||||
|
|
||||||
|
|
||||||
sizebefore: |
|
||||||
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \ |
|
||||||
2>/dev/null; echo; fi |
|
||||||
|
|
||||||
sizeafter: |
|
||||||
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ |
|
||||||
2>/dev/null; echo; fi |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Display compiler version information. |
|
||||||
gccversion : |
|
||||||
@$(CC) --version |
|
||||||
|
|
||||||
|
|
||||||
# Program the device. |
|
||||||
program: $(TARGET).hex $(TARGET).eep |
|
||||||
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) |
|
||||||
|
|
||||||
flip: $(TARGET).hex |
|
||||||
batchisp -hardware usb -device $(MCU) -operation erase f |
|
||||||
batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program |
|
||||||
batchisp -hardware usb -device $(MCU) -operation start reset 0 |
|
||||||
|
|
||||||
dfu: $(TARGET).hex |
|
||||||
dfu-programmer $(MCU) erase |
|
||||||
dfu-programmer $(MCU) flash $(TARGET).hex |
|
||||||
dfu-programmer $(MCU) reset |
|
||||||
|
|
||||||
flip-ee: $(TARGET).hex $(TARGET).eep |
|
||||||
$(COPY) $(TARGET).eep $(TARGET)eep.hex |
|
||||||
batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase |
|
||||||
batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program |
|
||||||
batchisp -hardware usb -device $(MCU) -operation start reset 0 |
|
||||||
$(REMOVE) $(TARGET)eep.hex |
|
||||||
|
|
||||||
dfu-ee: $(TARGET).hex $(TARGET).eep |
|
||||||
dfu-programmer $(MCU) eeprom-flash $(TARGET).eep |
|
||||||
dfu-programmer $(MCU) reset |
|
||||||
|
|
||||||
|
|
||||||
# Generate avr-gdb config/init file which does the following: |
|
||||||
# define the reset signal, load the target file, connect to target, and set |
|
||||||
# a breakpoint at main(). |
|
||||||
gdb-config: |
|
||||||
@$(REMOVE) $(GDBINIT_FILE) |
|
||||||
@echo define reset >> $(GDBINIT_FILE) |
|
||||||
@echo SIGNAL SIGHUP >> $(GDBINIT_FILE) |
|
||||||
@echo end >> $(GDBINIT_FILE) |
|
||||||
@echo file $(TARGET).elf >> $(GDBINIT_FILE) |
|
||||||
@echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE) |
|
||||||
ifeq ($(DEBUG_BACKEND),simulavr) |
|
||||||
@echo load >> $(GDBINIT_FILE) |
|
||||||
endif |
|
||||||
@echo break main >> $(GDBINIT_FILE) |
|
||||||
|
|
||||||
debug: gdb-config $(TARGET).elf |
|
||||||
ifeq ($(DEBUG_BACKEND), avarice) |
|
||||||
@echo Starting AVaRICE - Press enter when "waiting to connect" message displays. |
|
||||||
@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \ |
|
||||||
$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT) |
|
||||||
@$(WINSHELL) /c pause |
|
||||||
|
|
||||||
else |
|
||||||
@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \ |
|
||||||
$(DEBUG_MFREQ) --port $(DEBUG_PORT) |
|
||||||
endif |
|
||||||
@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE) |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. |
|
||||||
COFFCONVERT = $(OBJCOPY) --debugging |
|
||||||
COFFCONVERT += --change-section-address .data-0x800000 |
|
||||||
COFFCONVERT += --change-section-address .bss-0x800000 |
|
||||||
COFFCONVERT += --change-section-address .noinit-0x800000 |
|
||||||
COFFCONVERT += --change-section-address .eeprom-0x810000 |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
coff: $(TARGET).elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_COFF) $(TARGET).cof |
|
||||||
$(COFFCONVERT) -O coff-avr $< $(TARGET).cof |
|
||||||
|
|
||||||
|
|
||||||
extcoff: $(TARGET).elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_EXTENDED_COFF) $(TARGET).cof |
|
||||||
$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Create final output files (.hex, .eep) from ELF output file. |
|
||||||
%.hex: %.elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_FLASH) $@ |
|
||||||
$(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature $< $@ |
|
||||||
|
|
||||||
%.eep: %.elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_EEPROM) $@ |
|
||||||
-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ |
|
||||||
--change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0 |
|
||||||
|
|
||||||
# Create extended listing file from ELF output file. |
|
||||||
%.lss: %.elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_EXTENDED_LISTING) $@ |
|
||||||
$(OBJDUMP) -h -S -z $< > $@ |
|
||||||
|
|
||||||
# Create a symbol table from ELF output file. |
|
||||||
%.sym: %.elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_SYMBOL_TABLE) $@ |
|
||||||
$(NM) -n $< > $@ |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Create library from object files. |
|
||||||
.SECONDARY : $(TARGET).a |
|
||||||
.PRECIOUS : $(OBJ) |
|
||||||
%.a: $(OBJ) |
|
||||||
@echo |
|
||||||
@echo $(MSG_CREATING_LIBRARY) $@ |
|
||||||
$(AR) $@ $(OBJ) |
|
||||||
|
|
||||||
|
|
||||||
# Link: create ELF output file from object files. |
|
||||||
.SECONDARY : $(TARGET).elf |
|
||||||
.PRECIOUS : $(OBJ) |
|
||||||
%.elf: $(OBJ) |
|
||||||
@echo |
|
||||||
@echo $(MSG_LINKING) $@ |
|
||||||
$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS) |
|
||||||
|
|
||||||
|
|
||||||
# Compile: create object files from C source files. |
|
||||||
$(OBJDIR)/%.o : %.c |
|
||||||
@echo |
|
||||||
@echo $(MSG_COMPILING) $< |
|
||||||
$(CC) -c $(ALL_CFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Compile: create object files from C++ source files. |
|
||||||
$(OBJDIR)/%.o : %.cpp |
|
||||||
@echo |
|
||||||
@echo $(MSG_COMPILING_CPP) $< |
|
||||||
$(CC) -c $(ALL_CPPFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Compile: create assembler files from C source files. |
|
||||||
%.s : %.c |
|
||||||
$(CC) -S $(ALL_CFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Compile: create assembler files from C++ source files. |
|
||||||
%.s : %.cpp |
|
||||||
$(CC) -S $(ALL_CPPFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Assemble: create object files from assembler source files. |
|
||||||
$(OBJDIR)/%.o : %.S |
|
||||||
@echo |
|
||||||
@echo $(MSG_ASSEMBLING) $< |
|
||||||
$(CC) -c $(ALL_ASFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Create preprocessed source for use in sending a bug report. |
|
||||||
%.i : %.c |
|
||||||
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Target: clean project. |
|
||||||
clean: begin clean_list end |
|
||||||
|
|
||||||
clean_list : |
|
||||||
@echo |
|
||||||
@echo $(MSG_CLEANING) |
|
||||||
$(REMOVE) $(TARGET).hex |
|
||||||
$(REMOVE) $(TARGET).eep |
|
||||||
$(REMOVE) $(TARGET).cof |
|
||||||
$(REMOVE) $(TARGET).elf |
|
||||||
$(REMOVE) $(TARGET).map |
|
||||||
$(REMOVE) $(TARGET).sym |
|
||||||
$(REMOVE) $(TARGET).lss |
|
||||||
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) |
|
||||||
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) |
|
||||||
$(REMOVE) $(SRC:.c=.s) |
|
||||||
$(REMOVE) $(SRC:.c=.d) |
|
||||||
$(REMOVE) $(SRC:.c=.i) |
|
||||||
$(REMOVEDIR) .dep |
|
||||||
|
|
||||||
doxygen: |
|
||||||
@echo Generating Project Documentation \($(TARGET)\)... |
|
||||||
@if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ |
|
||||||
exit 1; \ |
|
||||||
fi; |
|
||||||
@echo Documentation Generation Complete. |
|
||||||
|
|
||||||
clean_doxygen: |
|
||||||
rm -rf Documentation |
|
||||||
|
|
||||||
checksource: |
|
||||||
@for f in $(SRC) $(CPPSRC) $(ASRC); do \ |
|
||||||
if [ -f $$f ]; then \ |
|
||||||
echo "Found Source File: $$f" ; \ |
|
||||||
else \ |
|
||||||
echo "Source File Not Found: $$f" ; \ |
|
||||||
fi; done |
|
||||||
|
|
||||||
|
|
||||||
# Create object files directory |
|
||||||
$(shell mkdir $(OBJDIR) 2>/dev/null) |
|
||||||
|
|
||||||
|
|
||||||
# Include the dependency files. |
|
||||||
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*) |
|
||||||
|
|
||||||
|
|
||||||
# Listing of phony targets. |
|
||||||
.PHONY : all begin finish end sizebefore sizeafter gccversion \ |
|
||||||
build elf hex eep lss sym coff extcoff doxygen clean \ |
|
||||||
clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ |
|
||||||
debug gdb-config checksource |
|
||||||
File diff suppressed because one or more lines are too long
@ -1,715 +0,0 @@ |
|||||||
# Hey Emacs, this is a -*- makefile -*- |
|
||||||
#---------------------------------------------------------------------------- |
|
||||||
# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al. |
|
||||||
# >> Modified for use with the LUFA project. << |
|
||||||
# |
|
||||||
# Released to the Public Domain |
|
||||||
# |
|
||||||
# Additional material for this makefile was written by: |
|
||||||
# Peter Fleury |
|
||||||
# Tim Henigan |
|
||||||
# Colin O'Flynn |
|
||||||
# Reiner Patommel |
|
||||||
# Markus Pfaff |
|
||||||
# Sander Pool |
|
||||||
# Frederik Rouleau |
|
||||||
# Carlos Lamas |
|
||||||
# Dean Camera |
|
||||||
# Opendous Inc. |
|
||||||
# Denver Gingerich |
|
||||||
# |
|
||||||
#---------------------------------------------------------------------------- |
|
||||||
# On command line: |
|
||||||
# |
|
||||||
# make all = Make software. |
|
||||||
# |
|
||||||
# make clean = Clean out built project files. |
|
||||||
# |
|
||||||
# make coff = Convert ELF to AVR COFF. |
|
||||||
# |
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF. |
|
||||||
# |
|
||||||
# make program = Download the hex file to the device, using avrdude. |
|
||||||
# Please customize the avrdude settings below first! |
|
||||||
# |
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must |
|
||||||
# have dfu-programmer installed). |
|
||||||
# |
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must |
|
||||||
# have Atmel FLIP installed). |
|
||||||
# |
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer |
|
||||||
# (must have dfu-programmer installed). |
|
||||||
# |
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP |
|
||||||
# (must have Atmel FLIP installed). |
|
||||||
# |
|
||||||
# make doxygen = Generate DoxyGen documentation for the project (must have |
|
||||||
# DoxyGen installed) |
|
||||||
# |
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging, |
|
||||||
# with avr-gdb or avr-insight as the front end for debugging. |
|
||||||
# |
|
||||||
# make filename.s = Just compile filename.c into the assembler code only. |
|
||||||
# |
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting |
|
||||||
# bug reports to the GCC project. |
|
||||||
# |
|
||||||
# To rebuild project do "make clean" then "make all". |
|
||||||
#---------------------------------------------------------------------------- |
|
||||||
|
|
||||||
|
|
||||||
# MCU name |
|
||||||
MCU = ### INSERT NAME OF MICROCONTROLLER MODEL HERE ### |
|
||||||
|
|
||||||
|
|
||||||
# Targeted chip architecture (see library "Architectures" documentation) |
|
||||||
ARCH = AVR8 |
|
||||||
|
|
||||||
|
|
||||||
# Target board (see library "Board Types" documentation, NONE for projects not requiring |
|
||||||
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called |
|
||||||
# "Board" inside the application directory. |
|
||||||
BOARD = ### INSERT NAME OF BOARD HERE, OR NONE IF NO BOARD DRIVERS USED ### |
|
||||||
|
|
||||||
|
|
||||||
# Processor frequency. |
|
||||||
# This will define a symbol, F_CPU, in all source code files equal to the |
|
||||||
# processor frequency in Hz. You can then use this symbol in your source code to |
|
||||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done |
|
||||||
# automatically to create a 32-bit value in your source code. |
|
||||||
# |
|
||||||
# This will be an integer division of F_CLOCK below, as it is sourced by |
|
||||||
# F_CLOCK after it has run through any CPU prescalers. Note that this value |
|
||||||
# does not *change* the processor frequency - it should merely be updated to |
|
||||||
# reflect the processor speed set externally so that the code can use accurate |
|
||||||
# software delays. |
|
||||||
F_CPU = ### INSERT PRESCALED SYSTEM CLOCK SPEED HERE, IN HZ ### |
|
||||||
|
|
||||||
|
|
||||||
# Input clock frequency. |
|
||||||
# This will define a symbol, F_USB, in all source code files equal to the |
|
||||||
# input clock frequency (before any prescaling is performed) in Hz. This value may |
|
||||||
# differ from F_CPU if prescaling is used on the latter, and is required as the |
|
||||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed |
|
||||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' |
|
||||||
# at the end, this will be done automatically to create a 32-bit value in your |
|
||||||
# source code. |
|
||||||
# |
|
||||||
# If no clock division is performed on the input clock inside the AVR (via the |
|
||||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. |
|
||||||
F_USB = ### INSERT CLOCK TO USB MODULE HERE, IN HZ ### |
|
||||||
|
|
||||||
|
|
||||||
# Output format. (can be srec, ihex, binary) |
|
||||||
FORMAT = ihex |
|
||||||
|
|
||||||
|
|
||||||
# Target file name (without extension). |
|
||||||
TARGET = ### INSERT NAME OF MAIN FILENAME HERE, WITHOUT EXTENSION ### |
|
||||||
|
|
||||||
|
|
||||||
# Object files directory |
|
||||||
# To put object files in current directory, use a dot (.), do NOT make |
|
||||||
# this an empty or blank macro! |
|
||||||
OBJDIR = . |
|
||||||
|
|
||||||
|
|
||||||
# Path to the LUFA library |
|
||||||
LUFA_PATH = ### INSERT PATH TO LUFA LIBRARY RELATIVE TO PROJECT DIRECTORY HERE ### |
|
||||||
|
|
||||||
|
|
||||||
# LUFA library compile-time options and predefined tokens (add '-D' before each token) |
|
||||||
LUFA_OPTS = ### INSERT LUFA COMPILE TIME TOKENS HERE ### |
|
||||||
|
|
||||||
|
|
||||||
# Create the LUFA source path variables by including the LUFA root makefile |
|
||||||
include $(LUFA_PATH)/LUFA/makefile |
|
||||||
|
|
||||||
|
|
||||||
# List C source files here. (C dependencies are automatically generated.) |
|
||||||
SRC = $(TARGET).c \ |
|
||||||
$(LUFA_SRC_USB) \ |
|
||||||
$(LUFA_SRC_USBCLASS) |
|
||||||
### INSERT ADDITIONAL PROJECT SOURCE FILENAMES OR LUFA MODULE NAMES HERE ### |
|
||||||
|
|
||||||
|
|
||||||
# List C++ source files here. (C dependencies are automatically generated.) |
|
||||||
CPPSRC = |
|
||||||
|
|
||||||
|
|
||||||
# List Assembler source files here. |
|
||||||
# Make them always end in a capital .S. Files ending in a lowercase .s |
|
||||||
# will not be considered source files but generated files (assembler |
|
||||||
# output from the compiler), and will be deleted upon "make clean"! |
|
||||||
# Even though the DOS/Win* filesystem matches both .s and .S the same, |
|
||||||
# it will preserve the spelling of the filenames, and gcc itself does |
|
||||||
# care about how the name is spelled on its command-line. |
|
||||||
ASRC = |
|
||||||
|
|
||||||
|
|
||||||
# Optimization level, can be [0, 1, 2, 3, s]. |
|
||||||
# 0 = turn off optimization. s = optimize for size. |
|
||||||
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) |
|
||||||
OPT = s |
|
||||||
|
|
||||||
|
|
||||||
# List any extra directories to look for include files here. |
|
||||||
# Each directory must be seperated by a space. |
|
||||||
# Use forward slashes for directory separators. |
|
||||||
# For a directory that has spaces, enclose it in quotes. |
|
||||||
EXTRAINCDIRS = $(LUFA_PATH)/ |
|
||||||
|
|
||||||
|
|
||||||
# Compiler flag to set the C Standard level. |
|
||||||
# c89 = "ANSI" C |
|
||||||
# gnu89 = c89 plus GCC extensions |
|
||||||
# c99 = ISO C99 standard (not yet fully implemented) |
|
||||||
# gnu99 = c99 plus GCC extensions |
|
||||||
CSTANDARD = -std=gnu99 |
|
||||||
|
|
||||||
|
|
||||||
# Place -D or -U options here for C sources |
|
||||||
CDEFS = -DF_CPU=$(F_CPU)UL |
|
||||||
CDEFS += -DF_USB=$(F_USB)UL |
|
||||||
CDEFS += -DBOARD=BOARD_$(BOARD) |
|
||||||
CDEFS += -DARCH=ARCH_$(ARCH) |
|
||||||
CDEFS += $(LUFA_OPTS) |
|
||||||
|
|
||||||
|
|
||||||
# Place -D or -U options here for ASM sources |
|
||||||
ADEFS = -DF_CPU=$(F_CPU) |
|
||||||
ADEFS += -DF_USB=$(F_USB)UL |
|
||||||
ADEFS += -DBOARD=BOARD_$(BOARD) |
|
||||||
ADEFS += -DARCH=ARCH_$(ARCH) |
|
||||||
ADEFS += $(LUFA_OPTS) |
|
||||||
|
|
||||||
# Place -D or -U options here for C++ sources |
|
||||||
CPPDEFS = -DF_CPU=$(F_CPU)UL |
|
||||||
CPPDEFS += -DF_USB=$(F_USB)UL |
|
||||||
CPPDEFS += -DBOARD=BOARD_$(BOARD) |
|
||||||
CPPDEFS += -DARCH=ARCH_$(ARCH) |
|
||||||
CPPDEFS += $(LUFA_OPTS) |
|
||||||
|
|
||||||
|
|
||||||
# Debugging format. |
|
||||||
# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs. |
|
||||||
# AVR Studio 4.10 requires dwarf-2. |
|
||||||
# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run. |
|
||||||
DEBUG = dwarf-2 |
|
||||||
|
|
||||||
|
|
||||||
#---------------- Compiler Options C ---------------- |
|
||||||
# -g*: generate debugging information |
|
||||||
# -O*: optimization level |
|
||||||
# -f...: tuning, see GCC manual and avr-libc documentation |
|
||||||
# -Wall...: warning level |
|
||||||
# -Wa,...: tell GCC to pass this to the assembler. |
|
||||||
# -adhlns...: create assembler listing |
|
||||||
CFLAGS = -g$(DEBUG) |
|
||||||
CFLAGS += $(CDEFS) |
|
||||||
CFLAGS += -O$(OPT) |
|
||||||
CFLAGS += -funsigned-char |
|
||||||
CFLAGS += -funsigned-bitfields |
|
||||||
CFLAGS += -ffunction-sections |
|
||||||
CFLAGS += -fno-inline-small-functions |
|
||||||
CFLAGS += -fpack-struct |
|
||||||
CFLAGS += -fshort-enums |
|
||||||
CFLAGS += -fno-strict-aliasing |
|
||||||
CFLAGS += -Wall |
|
||||||
CFLAGS += -Wstrict-prototypes |
|
||||||
CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) |
|
||||||
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) |
|
||||||
CFLAGS += $(CSTANDARD) |
|
||||||
|
|
||||||
|
|
||||||
#---------------- Compiler Options C++ ---------------- |
|
||||||
# -g*: generate debugging information |
|
||||||
# -O*: optimization level |
|
||||||
# -f...: tuning, see GCC manual and avr-libc documentation |
|
||||||
# -Wall...: warning level |
|
||||||
# -Wa,...: tell GCC to pass this to the assembler. |
|
||||||
# -adhlns...: create assembler listing |
|
||||||
CPPFLAGS = -g$(DEBUG) |
|
||||||
CPPFLAGS += $(CPPDEFS) |
|
||||||
CPPFLAGS += -O$(OPT) |
|
||||||
CPPFLAGS += -funsigned-char |
|
||||||
CPPFLAGS += -funsigned-bitfields |
|
||||||
CPPFLAGS += -fpack-struct |
|
||||||
CPPFLAGS += -fshort-enums |
|
||||||
CPPFLAGS += -ffunction-sections |
|
||||||
CPPFLAGS += -fno-strict-aliasing |
|
||||||
CPPFLAGS += -fno-exceptions |
|
||||||
CPPFLAGS += -Wall |
|
||||||
CPPFLAGS += -Wundef |
|
||||||
CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) |
|
||||||
CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) |
|
||||||
#CPPFLAGS += $(CSTANDARD) |
|
||||||
|
|
||||||
|
|
||||||
#---------------- Assembler Options ---------------- |
|
||||||
# -Wa,...: tell GCC to pass this to the assembler. |
|
||||||
# -adhlns: create listing |
|
||||||
# -gstabs: have the assembler create line number information; note that |
|
||||||
# for use in COFF files, additional information about filenames |
|
||||||
# and function names needs to be present in the assembler source |
|
||||||
# files -- see avr-libc docs [FIXME: not yet described there] |
|
||||||
# -listing-cont-lines: Sets the maximum number of continuation lines of hex |
|
||||||
# dump that will be displayed for a given single line of source input. |
|
||||||
ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 |
|
||||||
|
|
||||||
|
|
||||||
#---------------- Library Options ---------------- |
|
||||||
# Minimalistic printf version |
|
||||||
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min |
|
||||||
|
|
||||||
# Floating point printf version (requires MATH_LIB = -lm below) |
|
||||||
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt |
|
||||||
|
|
||||||
# If this is left blank, then it will use the Standard printf version. |
|
||||||
PRINTF_LIB = |
|
||||||
#PRINTF_LIB = $(PRINTF_LIB_MIN) |
|
||||||
#PRINTF_LIB = $(PRINTF_LIB_FLOAT) |
|
||||||
|
|
||||||
|
|
||||||
# Minimalistic scanf version |
|
||||||
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min |
|
||||||
|
|
||||||
# Floating point + %[ scanf version (requires MATH_LIB = -lm below) |
|
||||||
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt |
|
||||||
|
|
||||||
# If this is left blank, then it will use the Standard scanf version. |
|
||||||
SCANF_LIB = |
|
||||||
#SCANF_LIB = $(SCANF_LIB_MIN) |
|
||||||
#SCANF_LIB = $(SCANF_LIB_FLOAT) |
|
||||||
|
|
||||||
|
|
||||||
MATH_LIB = -lm |
|
||||||
|
|
||||||
|
|
||||||
# List any extra directories to look for libraries here. |
|
||||||
# Each directory must be seperated by a space. |
|
||||||
# Use forward slashes for directory separators. |
|
||||||
# For a directory that has spaces, enclose it in quotes. |
|
||||||
EXTRALIBDIRS = |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#---------------- External Memory Options ---------------- |
|
||||||
|
|
||||||
# 64 KB of external RAM, starting after internal RAM (ATmega128!), |
|
||||||
# used for variables (.data/.bss) and heap (malloc()). |
|
||||||
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff |
|
||||||
|
|
||||||
# 64 KB of external RAM, starting after internal RAM (ATmega128!), |
|
||||||
# only used for heap (malloc()). |
|
||||||
#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff |
|
||||||
|
|
||||||
EXTMEMOPTS = |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#---------------- Linker Options ---------------- |
|
||||||
# -Wl,...: tell GCC to pass this to linker. |
|
||||||
# -Map: create map file |
|
||||||
# --cref: add cross reference to map file |
|
||||||
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref |
|
||||||
LDFLAGS += -Wl,--relax |
|
||||||
LDFLAGS += -Wl,--gc-sections |
|
||||||
LDFLAGS += $(EXTMEMOPTS) |
|
||||||
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) |
|
||||||
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB) |
|
||||||
#LDFLAGS += -T linker_script.x |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#---------------- Programming Options (avrdude) ---------------- |
|
||||||
|
|
||||||
# Programming hardware |
|
||||||
# Type: avrdude -c ? |
|
||||||
# to get a full listing. |
|
||||||
# |
|
||||||
AVRDUDE_PROGRAMMER = jtagmkII |
|
||||||
|
|
||||||
# com1 = serial port. Use lpt1 to connect to parallel port. |
|
||||||
AVRDUDE_PORT = usb |
|
||||||
|
|
||||||
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex |
|
||||||
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep |
|
||||||
|
|
||||||
|
|
||||||
# Uncomment the following if you want avrdude's erase cycle counter. |
|
||||||
# Note that this counter needs to be initialized first using -Yn, |
|
||||||
# see avrdude manual. |
|
||||||
#AVRDUDE_ERASE_COUNTER = -y |
|
||||||
|
|
||||||
# Uncomment the following if you do /not/ wish a verification to be |
|
||||||
# performed after programming the device. |
|
||||||
#AVRDUDE_NO_VERIFY = -V |
|
||||||
|
|
||||||
# Increase verbosity level. Please use this when submitting bug |
|
||||||
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> |
|
||||||
# to submit bug reports. |
|
||||||
#AVRDUDE_VERBOSE = -v -v |
|
||||||
|
|
||||||
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) |
|
||||||
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY) |
|
||||||
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE) |
|
||||||
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER) |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#---------------- Debugging Options ---------------- |
|
||||||
|
|
||||||
# For simulavr only - target MCU frequency. |
|
||||||
DEBUG_MFREQ = $(F_CPU) |
|
||||||
|
|
||||||
# Set the DEBUG_UI to either gdb or insight. |
|
||||||
# DEBUG_UI = gdb |
|
||||||
DEBUG_UI = insight |
|
||||||
|
|
||||||
# Set the debugging back-end to either avarice, simulavr. |
|
||||||
DEBUG_BACKEND = avarice |
|
||||||
#DEBUG_BACKEND = simulavr |
|
||||||
|
|
||||||
# GDB Init Filename. |
|
||||||
GDBINIT_FILE = __avr_gdbinit |
|
||||||
|
|
||||||
# When using avarice settings for the JTAG |
|
||||||
JTAG_DEV = /dev/com1 |
|
||||||
|
|
||||||
# Debugging port used to communicate between GDB / avarice / simulavr. |
|
||||||
DEBUG_PORT = 4242 |
|
||||||
|
|
||||||
# Debugging host used to communicate between GDB / avarice / simulavr, normally |
|
||||||
# just set to localhost unless doing some sort of crazy debugging when |
|
||||||
# avarice is running on a different computer. |
|
||||||
DEBUG_HOST = localhost |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#============================================================================ |
|
||||||
|
|
||||||
|
|
||||||
# Define programs and commands. |
|
||||||
SHELL = sh |
|
||||||
CC = avr-gcc |
|
||||||
OBJCOPY = avr-objcopy |
|
||||||
OBJDUMP = avr-objdump |
|
||||||
SIZE = avr-size |
|
||||||
AR = avr-ar rcs |
|
||||||
NM = avr-nm |
|
||||||
AVRDUDE = avrdude |
|
||||||
REMOVE = rm -f |
|
||||||
REMOVEDIR = rm -rf |
|
||||||
COPY = cp |
|
||||||
WINSHELL = cmd |
|
||||||
|
|
||||||
|
|
||||||
# Define Messages |
|
||||||
# English |
|
||||||
MSG_ERRORS_NONE = Errors: none |
|
||||||
MSG_BEGIN = -------- begin -------- |
|
||||||
MSG_END = -------- end -------- |
|
||||||
MSG_SIZE_BEFORE = Size before: |
|
||||||
MSG_SIZE_AFTER = Size after: |
|
||||||
MSG_COFF = Converting to AVR COFF: |
|
||||||
MSG_EXTENDED_COFF = Converting to AVR Extended COFF: |
|
||||||
MSG_FLASH = Creating load file for Flash: |
|
||||||
MSG_EEPROM = Creating load file for EEPROM: |
|
||||||
MSG_EXTENDED_LISTING = Creating Extended Listing: |
|
||||||
MSG_SYMBOL_TABLE = Creating Symbol Table: |
|
||||||
MSG_LINKING = Linking: |
|
||||||
MSG_COMPILING = Compiling C: |
|
||||||
MSG_COMPILING_CPP = Compiling C++: |
|
||||||
MSG_ASSEMBLING = Assembling: |
|
||||||
MSG_CLEANING = Cleaning project: |
|
||||||
MSG_CREATING_LIBRARY = Creating library: |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Define all object files. |
|
||||||
OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) |
|
||||||
|
|
||||||
# Define all listing files. |
|
||||||
LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) |
|
||||||
|
|
||||||
|
|
||||||
# Compiler flags to generate dependency files. |
|
||||||
GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d |
|
||||||
|
|
||||||
|
|
||||||
# Combine all necessary flags and optional flags. |
|
||||||
# Add target processor to flags. |
|
||||||
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS) |
|
||||||
ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS) |
|
||||||
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Default target. |
|
||||||
all: begin gccversion sizebefore build sizeafter end |
|
||||||
|
|
||||||
# Change the build target to build a HEX file or a library. |
|
||||||
build: elf hex eep lss sym |
|
||||||
#build: lib |
|
||||||
|
|
||||||
|
|
||||||
elf: $(TARGET).elf |
|
||||||
hex: $(TARGET).hex |
|
||||||
eep: $(TARGET).eep |
|
||||||
lss: $(TARGET).lss |
|
||||||
sym: $(TARGET).sym |
|
||||||
LIBNAME=lib$(TARGET).a |
|
||||||
lib: $(LIBNAME) |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Eye candy. |
|
||||||
# AVR Studio 3.x does not check make's exit code but relies on |
|
||||||
# the following magic strings to be generated by the compile job. |
|
||||||
begin: |
|
||||||
@echo |
|
||||||
@echo $(MSG_BEGIN) |
|
||||||
|
|
||||||
end: |
|
||||||
@echo $(MSG_END) |
|
||||||
@echo |
|
||||||
|
|
||||||
|
|
||||||
# Display size of file. |
|
||||||
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex |
|
||||||
ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf |
|
||||||
MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) ) |
|
||||||
FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr ) |
|
||||||
|
|
||||||
|
|
||||||
sizebefore: |
|
||||||
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \ |
|
||||||
2>/dev/null; echo; fi |
|
||||||
|
|
||||||
sizeafter: |
|
||||||
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ |
|
||||||
2>/dev/null; echo; fi |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Display compiler version information. |
|
||||||
gccversion : |
|
||||||
@$(CC) --version |
|
||||||
|
|
||||||
|
|
||||||
# Program the device. |
|
||||||
program: $(TARGET).hex $(TARGET).eep |
|
||||||
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) |
|
||||||
|
|
||||||
flip: $(TARGET).hex |
|
||||||
batchisp -hardware usb -device $(MCU) -operation erase f |
|
||||||
batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program |
|
||||||
batchisp -hardware usb -device $(MCU) -operation start reset 0 |
|
||||||
|
|
||||||
dfu: $(TARGET).hex |
|
||||||
dfu-programmer $(MCU) erase |
|
||||||
dfu-programmer $(MCU) flash $(TARGET).hex |
|
||||||
dfu-programmer $(MCU) reset |
|
||||||
|
|
||||||
flip-ee: $(TARGET).hex $(TARGET).eep |
|
||||||
$(COPY) $(TARGET).eep $(TARGET)eep.hex |
|
||||||
batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase |
|
||||||
batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program |
|
||||||
batchisp -hardware usb -device $(MCU) -operation start reset 0 |
|
||||||
$(REMOVE) $(TARGET)eep.hex |
|
||||||
|
|
||||||
dfu-ee: $(TARGET).hex $(TARGET).eep |
|
||||||
dfu-programmer $(MCU) eeprom-flash $(TARGET).eep |
|
||||||
dfu-programmer $(MCU) reset |
|
||||||
|
|
||||||
|
|
||||||
# Generate avr-gdb config/init file which does the following: |
|
||||||
# define the reset signal, load the target file, connect to target, and set |
|
||||||
# a breakpoint at main(). |
|
||||||
gdb-config: |
|
||||||
@$(REMOVE) $(GDBINIT_FILE) |
|
||||||
@echo define reset >> $(GDBINIT_FILE) |
|
||||||
@echo SIGNAL SIGHUP >> $(GDBINIT_FILE) |
|
||||||
@echo end >> $(GDBINIT_FILE) |
|
||||||
@echo file $(TARGET).elf >> $(GDBINIT_FILE) |
|
||||||
@echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE) |
|
||||||
ifeq ($(DEBUG_BACKEND),simulavr) |
|
||||||
@echo load >> $(GDBINIT_FILE) |
|
||||||
endif |
|
||||||
@echo break main >> $(GDBINIT_FILE) |
|
||||||
|
|
||||||
debug: gdb-config $(TARGET).elf |
|
||||||
ifeq ($(DEBUG_BACKEND), avarice) |
|
||||||
@echo Starting AVaRICE - Press enter when "waiting to connect" message displays. |
|
||||||
@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \ |
|
||||||
$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT) |
|
||||||
@$(WINSHELL) /c pause |
|
||||||
|
|
||||||
else |
|
||||||
@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \ |
|
||||||
$(DEBUG_MFREQ) --port $(DEBUG_PORT) |
|
||||||
endif |
|
||||||
@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE) |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. |
|
||||||
COFFCONVERT = $(OBJCOPY) --debugging |
|
||||||
COFFCONVERT += --change-section-address .data-0x800000 |
|
||||||
COFFCONVERT += --change-section-address .bss-0x800000 |
|
||||||
COFFCONVERT += --change-section-address .noinit-0x800000 |
|
||||||
COFFCONVERT += --change-section-address .eeprom-0x810000 |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
coff: $(TARGET).elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_COFF) $(TARGET).cof |
|
||||||
$(COFFCONVERT) -O coff-avr $< $(TARGET).cof |
|
||||||
|
|
||||||
|
|
||||||
extcoff: $(TARGET).elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_EXTENDED_COFF) $(TARGET).cof |
|
||||||
$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Create final output files (.hex, .eep) from ELF output file. |
|
||||||
%.hex: %.elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_FLASH) $@ |
|
||||||
$(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature $< $@ |
|
||||||
|
|
||||||
%.eep: %.elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_EEPROM) $@ |
|
||||||
-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ |
|
||||||
--change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0 |
|
||||||
|
|
||||||
# Create extended listing file from ELF output file. |
|
||||||
%.lss: %.elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_EXTENDED_LISTING) $@ |
|
||||||
$(OBJDUMP) -h -S -z $< > $@ |
|
||||||
|
|
||||||
# Create a symbol table from ELF output file. |
|
||||||
%.sym: %.elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_SYMBOL_TABLE) $@ |
|
||||||
$(NM) -n $< > $@ |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Create library from object files. |
|
||||||
.SECONDARY : $(TARGET).a |
|
||||||
.PRECIOUS : $(OBJ) |
|
||||||
%.a: $(OBJ) |
|
||||||
@echo |
|
||||||
@echo $(MSG_CREATING_LIBRARY) $@ |
|
||||||
$(AR) $@ $(OBJ) |
|
||||||
|
|
||||||
|
|
||||||
# Link: create ELF output file from object files. |
|
||||||
.SECONDARY : $(TARGET).elf |
|
||||||
.PRECIOUS : $(OBJ) |
|
||||||
%.elf: $(OBJ) |
|
||||||
@echo |
|
||||||
@echo $(MSG_LINKING) $@ |
|
||||||
$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS) |
|
||||||
|
|
||||||
|
|
||||||
# Compile: create object files from C source files. |
|
||||||
$(OBJDIR)/%.o : %.c |
|
||||||
@echo |
|
||||||
@echo $(MSG_COMPILING) $< |
|
||||||
$(CC) -c $(ALL_CFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Compile: create object files from C++ source files. |
|
||||||
$(OBJDIR)/%.o : %.cpp |
|
||||||
@echo |
|
||||||
@echo $(MSG_COMPILING_CPP) $< |
|
||||||
$(CC) -c $(ALL_CPPFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Compile: create assembler files from C source files. |
|
||||||
%.s : %.c |
|
||||||
$(CC) -S $(ALL_CFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Compile: create assembler files from C++ source files. |
|
||||||
%.s : %.cpp |
|
||||||
$(CC) -S $(ALL_CPPFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Assemble: create object files from assembler source files. |
|
||||||
$(OBJDIR)/%.o : %.S |
|
||||||
@echo |
|
||||||
@echo $(MSG_ASSEMBLING) $< |
|
||||||
$(CC) -c $(ALL_ASFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Create preprocessed source for use in sending a bug report. |
|
||||||
%.i : %.c |
|
||||||
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Target: clean project. |
|
||||||
clean: begin clean_list end |
|
||||||
|
|
||||||
clean_list : |
|
||||||
@echo |
|
||||||
@echo $(MSG_CLEANING) |
|
||||||
$(REMOVE) $(TARGET).hex |
|
||||||
$(REMOVE) $(TARGET).eep |
|
||||||
$(REMOVE) $(TARGET).cof |
|
||||||
$(REMOVE) $(TARGET).elf |
|
||||||
$(REMOVE) $(TARGET).map |
|
||||||
$(REMOVE) $(TARGET).sym |
|
||||||
$(REMOVE) $(TARGET).lss |
|
||||||
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) |
|
||||||
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) |
|
||||||
$(REMOVE) $(SRC:.c=.s) |
|
||||||
$(REMOVE) $(SRC:.c=.d) |
|
||||||
$(REMOVE) $(SRC:.c=.i) |
|
||||||
$(REMOVEDIR) .dep |
|
||||||
|
|
||||||
doxygen: |
|
||||||
@echo Generating Project Documentation \($(TARGET)\)... |
|
||||||
@if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ |
|
||||||
exit 1; \ |
|
||||||
fi; |
|
||||||
@echo Documentation Generation Complete. |
|
||||||
|
|
||||||
clean_doxygen: |
|
||||||
rm -rf Documentation |
|
||||||
|
|
||||||
checksource: |
|
||||||
@for f in $(SRC) $(CPPSRC) $(ASRC); do \ |
|
||||||
if [ -f $$f ]; then \ |
|
||||||
echo "Found Source File: $$f" ; \ |
|
||||||
else \ |
|
||||||
echo "Source File Not Found: $$f" ; \ |
|
||||||
fi; done |
|
||||||
|
|
||||||
|
|
||||||
# Create object files directory |
|
||||||
$(shell mkdir $(OBJDIR) 2>/dev/null) |
|
||||||
|
|
||||||
|
|
||||||
# Include the dependency files. |
|
||||||
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*) |
|
||||||
|
|
||||||
|
|
||||||
# Listing of phony targets. |
|
||||||
.PHONY : all begin finish end sizebefore sizeafter gccversion \ |
|
||||||
build elf hex eep lss sym coff extcoff doxygen clean \ |
|
||||||
clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ |
|
||||||
debug gdb-config checksource |
|
||||||
@ -1,489 +0,0 @@ |
|||||||
# Hey Emacs, this is a -*- makefile -*- |
|
||||||
#---------------------------------------------------------------------------- |
|
||||||
# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al. |
|
||||||
# >> Modified for use with the LUFA project. << |
|
||||||
# |
|
||||||
# Released to the Public Domain |
|
||||||
# |
|
||||||
# Additional material for this makefile was written by: |
|
||||||
# Peter Fleury |
|
||||||
# Tim Henigan |
|
||||||
# Colin O'Flynn |
|
||||||
# Reiner Patommel |
|
||||||
# Markus Pfaff |
|
||||||
# Sander Pool |
|
||||||
# Frederik Rouleau |
|
||||||
# Carlos Lamas |
|
||||||
# Dean Camera |
|
||||||
# Opendous Inc. |
|
||||||
# Denver Gingerich |
|
||||||
# |
|
||||||
#---------------------------------------------------------------------------- |
|
||||||
# On command line: |
|
||||||
# |
|
||||||
# make all = Make software. |
|
||||||
# |
|
||||||
# make clean = Clean out built project files. |
|
||||||
# |
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must |
|
||||||
# have dfu-programmer installed). |
|
||||||
# |
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must |
|
||||||
# have Atmel FLIP installed). |
|
||||||
# |
|
||||||
# make doxygen = Generate DoxyGen documentation for the project (must have |
|
||||||
# DoxyGen installed) |
|
||||||
# |
|
||||||
# make filename.s = Just compile filename.c into the assembler code only. |
|
||||||
# |
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting |
|
||||||
# bug reports to the GCC project. |
|
||||||
# |
|
||||||
# To rebuild project do "make clean" then "make all". |
|
||||||
#---------------------------------------------------------------------------- |
|
||||||
|
|
||||||
|
|
||||||
# MCU name |
|
||||||
MCU = ### INSERT NAME OF MICROCONTROLLER MODEL HERE ### |
|
||||||
|
|
||||||
|
|
||||||
# Targeted chip architecture (see library "Architectures" documentation) |
|
||||||
ARCH = UC3 |
|
||||||
|
|
||||||
|
|
||||||
# Target board (see library "Board Types" documentation, NONE for projects not requiring |
|
||||||
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called |
|
||||||
# "Board" inside the application directory. |
|
||||||
BOARD = ### INSERT NAME OF BOARD HERE, OR NONE IF NO BOARD DRIVERS USED ### |
|
||||||
|
|
||||||
|
|
||||||
# Processor frequency. |
|
||||||
# This will define a symbol, F_CPU, in all source code files equal to the |
|
||||||
# processor frequency in Hz. You can then use this symbol in your source code to |
|
||||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done |
|
||||||
# automatically to create a 32-bit value in your source code. |
|
||||||
# |
|
||||||
# This should be the frequency the system core runs at, after the system clock |
|
||||||
# has been set up correctly and started. |
|
||||||
F_CPU = ### INSERT PRESCALED SYSTEM CLOCK SPEED HERE, IN HZ ### |
|
||||||
|
|
||||||
|
|
||||||
# USB controller master clock frequency. |
|
||||||
# This will define a symbol, F_USB, in all source code files equal to the |
|
||||||
# input clock frequency of the USB controller's clock generator in Hz. |
|
||||||
# |
|
||||||
# For the UC3 chips, this should be equal to 48MHz or 96MHz. |
|
||||||
F_USB = ### INSERT CLOCK TO USB MODULE HERE, IN HZ ### |
|
||||||
|
|
||||||
|
|
||||||
# Output format. (can be srec, ihex, binary) |
|
||||||
FORMAT = ihex |
|
||||||
|
|
||||||
|
|
||||||
# Target file name (without extension). |
|
||||||
TARGET = ### INSERT NAME OF MAIN FILENAME HERE, WITHOUT EXTENSION ### |
|
||||||
|
|
||||||
|
|
||||||
# Object files directory |
|
||||||
# To put object files in current directory, use a dot (.), do NOT make |
|
||||||
# this an empty or blank macro! |
|
||||||
OBJDIR = . |
|
||||||
|
|
||||||
|
|
||||||
# Path to the LUFA library |
|
||||||
LUFA_PATH = ### INSERT PATH TO LUFA LIBRARY RELATIVE TO PROJECT DIRECTORY HERE ### |
|
||||||
|
|
||||||
|
|
||||||
# LUFA library compile-time options and predefined tokens (add '-D' before each token) |
|
||||||
LUFA_OPTS = ### INSERT LUFA COMPILE TIME TOKENS HERE ### |
|
||||||
|
|
||||||
|
|
||||||
# Create the LUFA source path variables by including the LUFA root makefile |
|
||||||
include $(LUFA_PATH)/LUFA/makefile |
|
||||||
|
|
||||||
|
|
||||||
# List C source files here. (C dependencies are automatically generated.) |
|
||||||
SRC = $(TARGET).c \ |
|
||||||
$(LUFA_SRC_USB) \ |
|
||||||
$(LUFA_SRC_USBCLASS) |
|
||||||
### INSERT ADDITIONAL PROJECT SOURCE FILENAMES OR LUFA MODULE NAMES HERE ### |
|
||||||
|
|
||||||
|
|
||||||
# List C++ source files here. (C dependencies are automatically generated.) |
|
||||||
CPPSRC = |
|
||||||
|
|
||||||
|
|
||||||
# List Assembler source files here. |
|
||||||
# Make them always end in a capital .S. Files ending in a lowercase .s |
|
||||||
# will not be considered source files but generated files (assembler |
|
||||||
# output from the compiler), and will be deleted upon "make clean"! |
|
||||||
# Even though the DOS/Win* filesystem matches both .s and .S the same, |
|
||||||
# it will preserve the spelling of the filenames, and gcc itself does |
|
||||||
# care about how the name is spelled on its command-line. |
|
||||||
ASRC = |
|
||||||
|
|
||||||
|
|
||||||
# Optimization level, can be [0, 1, 2, 3, s]. |
|
||||||
# 0 = turn off optimization. s = optimize for size. |
|
||||||
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) |
|
||||||
OPT = s |
|
||||||
|
|
||||||
|
|
||||||
# List any extra directories to look for include files here. |
|
||||||
# Each directory must be seperated by a space. |
|
||||||
# Use forward slashes for directory separators. |
|
||||||
# For a directory that has spaces, enclose it in quotes. |
|
||||||
EXTRAINCDIRS = $(LUFA_PATH)/ |
|
||||||
|
|
||||||
|
|
||||||
# Compiler flag to set the C Standard level. |
|
||||||
# c89 = "ANSI" C |
|
||||||
# gnu89 = c89 plus GCC extensions |
|
||||||
# c99 = ISO C99 standard (not yet fully implemented) |
|
||||||
# gnu99 = c99 plus GCC extensions |
|
||||||
CSTANDARD = -std=gnu99 |
|
||||||
|
|
||||||
|
|
||||||
# Place -D or -U options here for C sources |
|
||||||
CDEFS = -DF_CPU=$(F_CPU)UL |
|
||||||
CDEFS += -DF_USB=$(F_USB)UL |
|
||||||
CDEFS += -DBOARD=BOARD_$(BOARD) |
|
||||||
CDEFS += -DARCH=ARCH_$(ARCH) |
|
||||||
CDEFS += $(LUFA_OPTS) |
|
||||||
|
|
||||||
|
|
||||||
# Place -D or -U options here for ASM sources |
|
||||||
ADEFS = -DF_CPU=$(F_CPU) |
|
||||||
ADEFS += -DF_USB=$(F_USB)UL |
|
||||||
ADEFS += -DBOARD=BOARD_$(BOARD) |
|
||||||
ADEFS += -DARCH=ARCH_$(ARCH) |
|
||||||
ADEFS += $(LUFA_OPTS) |
|
||||||
|
|
||||||
# Place -D or -U options here for C++ sources |
|
||||||
CPPDEFS = -DF_CPU=$(F_CPU)UL |
|
||||||
CPPDEFS += -DF_USB=$(F_USB)UL |
|
||||||
CPPDEFS += -DBOARD=BOARD_$(BOARD) |
|
||||||
CPPDEFS += -DARCH=ARCH_$(ARCH) |
|
||||||
CPPDEFS += $(LUFA_OPTS) |
|
||||||
|
|
||||||
|
|
||||||
# Debugging level. |
|
||||||
DEBUG = 3 |
|
||||||
|
|
||||||
|
|
||||||
#---------------- Compiler Options C ---------------- |
|
||||||
# -g*: generate debugging information |
|
||||||
# -O*: optimization level |
|
||||||
# -f...: tuning, see GCC manual and avr-libc documentation |
|
||||||
# -Wall...: warning level |
|
||||||
# -Wa,...: tell GCC to pass this to the assembler. |
|
||||||
# -adhlns...: create assembler listing |
|
||||||
CFLAGS = -g$(DEBUG) |
|
||||||
CFLAGS += $(CDEFS) |
|
||||||
CFLAGS += -O$(OPT) |
|
||||||
CFLAGS += -funsigned-char |
|
||||||
CFLAGS += -funsigned-bitfields |
|
||||||
CFLAGS += -ffunction-sections |
|
||||||
CFLAGS += -fno-strict-aliasing |
|
||||||
CFLAGS += -Wall |
|
||||||
CFLAGS += -Wstrict-prototypes |
|
||||||
CFLAGS += -masm-addr-pseudos |
|
||||||
#CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) |
|
||||||
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) |
|
||||||
CFLAGS += $(CSTANDARD) |
|
||||||
|
|
||||||
|
|
||||||
#---------------- Compiler Options C++ ---------------- |
|
||||||
# -g*: generate debugging information |
|
||||||
# -O*: optimization level |
|
||||||
# -f...: tuning, see GCC manual and avr-libc documentation |
|
||||||
# -Wall...: warning level |
|
||||||
# -Wa,...: tell GCC to pass this to the assembler. |
|
||||||
# -adhlns...: create assembler listing |
|
||||||
CPPFLAGS = -g$(DEBUG) |
|
||||||
CPPFLAGS += $(CPPDEFS) |
|
||||||
CPPFLAGS += -O$(OPT) |
|
||||||
CPPFLAGS += -funsigned-char |
|
||||||
CPPFLAGS += -funsigned-bitfields |
|
||||||
CPPFLAGS += -ffunction-sections |
|
||||||
CPPFLAGS += -fno-strict-aliasing |
|
||||||
CPPFLAGS += -fno-exceptions |
|
||||||
CPPFLAGS += -masm-addr-pseudos |
|
||||||
CPPFLAGS += -Wall |
|
||||||
CPPFLAGS += -Wundef |
|
||||||
#CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) |
|
||||||
CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) |
|
||||||
#CPPFLAGS += $(CSTANDARD) |
|
||||||
|
|
||||||
|
|
||||||
#---------------- Assembler Options ---------------- |
|
||||||
# -Wa,...: tell GCC to pass this to the assembler. |
|
||||||
# -adhlns: create listing |
|
||||||
# -gstabs: have the assembler create line number information; note that |
|
||||||
# for use in COFF files, additional information about filenames |
|
||||||
# and function names needs to be present in the assembler source |
|
||||||
# files -- see avr-libc docs [FIXME: not yet described there] |
|
||||||
# -listing-cont-lines: Sets the maximum number of continuation lines of hex |
|
||||||
# dump that will be displayed for a given single line of source input. |
|
||||||
ASFLAGS = $(ADEFS) |
|
||||||
#ASFLAGS += -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 |
|
||||||
|
|
||||||
|
|
||||||
#---------------- Linker Options ---------------- |
|
||||||
# -Wl,...: tell GCC to pass this to linker. |
|
||||||
# -Map: create map file |
|
||||||
# --cref: add cross reference to map file |
|
||||||
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref |
|
||||||
LDFLAGS += -Wl,--gc-sections --rodata-writable |
|
||||||
LDFLAGS += -Wl,--direct-data |
|
||||||
#LDFLAGS += -T linker_script.x |
|
||||||
|
|
||||||
|
|
||||||
#============================================================================ |
|
||||||
|
|
||||||
|
|
||||||
# Define programs and commands. |
|
||||||
SHELL = sh |
|
||||||
CC = avr32-gcc |
|
||||||
OBJCOPY = avr32-objcopy |
|
||||||
OBJDUMP = avr32-objdump |
|
||||||
SIZE = avr32-size |
|
||||||
AR = avr32-ar rcs |
|
||||||
NM = avr32-nm |
|
||||||
REMOVE = rm -f |
|
||||||
REMOVEDIR = rm -rf |
|
||||||
COPY = cp |
|
||||||
WINSHELL = cmd |
|
||||||
|
|
||||||
|
|
||||||
# Define Messages |
|
||||||
# English |
|
||||||
MSG_ERRORS_NONE = Errors: none |
|
||||||
MSG_BEGIN = -------- begin -------- |
|
||||||
MSG_END = -------- end -------- |
|
||||||
MSG_SIZE_BEFORE = Size before: |
|
||||||
MSG_SIZE_AFTER = Size after: |
|
||||||
MSG_COFF = Converting to AVR COFF: |
|
||||||
MSG_FLASH = Creating load file for Flash: |
|
||||||
MSG_EEPROM = Creating load file for EEPROM: |
|
||||||
MSG_EXTENDED_LISTING = Creating Extended Listing: |
|
||||||
MSG_SYMBOL_TABLE = Creating Symbol Table: |
|
||||||
MSG_LINKING = Linking: |
|
||||||
MSG_COMPILING = Compiling C: |
|
||||||
MSG_COMPILING_CPP = Compiling C++: |
|
||||||
MSG_ASSEMBLING = Assembling: |
|
||||||
MSG_CLEANING = Cleaning project: |
|
||||||
MSG_CREATING_LIBRARY = Creating library: |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Define all object files. |
|
||||||
OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) |
|
||||||
|
|
||||||
# Define all listing files. |
|
||||||
LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) |
|
||||||
|
|
||||||
|
|
||||||
# Compiler flags to generate dependency files. |
|
||||||
GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d |
|
||||||
|
|
||||||
|
|
||||||
# Combine all necessary flags and optional flags. |
|
||||||
# Add target processor to flags. |
|
||||||
ALL_CFLAGS = -mpart=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS) |
|
||||||
ALL_CPPFLAGS = -mpart=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS) |
|
||||||
ALL_ASFLAGS = -mpart=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Default target. |
|
||||||
all: begin gccversion sizebefore build sizeafter end |
|
||||||
|
|
||||||
# Change the build target to build a HEX file or a library. |
|
||||||
build: elf hex lss sym |
|
||||||
#build: lib |
|
||||||
|
|
||||||
|
|
||||||
elf: $(TARGET).elf |
|
||||||
hex: $(TARGET).hex |
|
||||||
lss: $(TARGET).lss |
|
||||||
sym: $(TARGET).sym |
|
||||||
LIBNAME=lib$(TARGET).a |
|
||||||
lib: $(LIBNAME) |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Eye candy. |
|
||||||
# AVR Studio 3.x does not check make's exit code but relies on |
|
||||||
# the following magic strings to be generated by the compile job. |
|
||||||
begin: |
|
||||||
@echo |
|
||||||
@echo $(MSG_BEGIN) |
|
||||||
|
|
||||||
end: |
|
||||||
@echo $(MSG_END) |
|
||||||
@echo |
|
||||||
|
|
||||||
|
|
||||||
# Display size of file. |
|
||||||
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex |
|
||||||
ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf |
|
||||||
MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) ) |
|
||||||
FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr ) |
|
||||||
|
|
||||||
|
|
||||||
sizebefore: |
|
||||||
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \ |
|
||||||
2>/dev/null; echo; fi |
|
||||||
|
|
||||||
sizeafter: |
|
||||||
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ |
|
||||||
2>/dev/null; echo; fi |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Display compiler version information. |
|
||||||
gccversion : |
|
||||||
@$(CC) --version |
|
||||||
|
|
||||||
|
|
||||||
# Program the device. |
|
||||||
flip: $(TARGET).hex |
|
||||||
batchisp -hardware usb -device $(MCU) -operation erase f |
|
||||||
batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program |
|
||||||
batchisp -hardware usb -device $(MCU) -operation start reset 0 |
|
||||||
|
|
||||||
dfu: $(TARGET).hex |
|
||||||
dfu-programmer $(MCU) erase |
|
||||||
dfu-programmer $(MCU) flash $(TARGET).hex |
|
||||||
dfu-programmer $(MCU) reset |
|
||||||
|
|
||||||
|
|
||||||
# Create final output files (.hex, .eep) from ELF output file. |
|
||||||
%.hex: %.elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_FLASH) $@ |
|
||||||
$(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature $< $@ |
|
||||||
|
|
||||||
# Create extended listing file from ELF output file. |
|
||||||
%.lss: %.elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_EXTENDED_LISTING) $@ |
|
||||||
$(OBJDUMP) -h -S -z $< > $@ |
|
||||||
|
|
||||||
# Create a symbol table from ELF output file. |
|
||||||
%.sym: %.elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_SYMBOL_TABLE) $@ |
|
||||||
$(NM) -n $< > $@ |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Create library from object files. |
|
||||||
.SECONDARY : $(TARGET).a |
|
||||||
.PRECIOUS : $(OBJ) |
|
||||||
%.a: $(OBJ) |
|
||||||
@echo |
|
||||||
@echo $(MSG_CREATING_LIBRARY) $@ |
|
||||||
$(AR) $@ $(OBJ) |
|
||||||
|
|
||||||
|
|
||||||
# Link: create ELF output file from object files. |
|
||||||
.SECONDARY : $(TARGET).elf |
|
||||||
.PRECIOUS : $(OBJ) |
|
||||||
%.elf: $(OBJ) |
|
||||||
@echo |
|
||||||
@echo $(MSG_LINKING) $@ |
|
||||||
$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS) |
|
||||||
|
|
||||||
|
|
||||||
# Compile: create object files from C source files. |
|
||||||
$(OBJDIR)/%.o : %.c |
|
||||||
@echo |
|
||||||
@echo $(MSG_COMPILING) $< |
|
||||||
$(CC) -c $(ALL_CFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Compile: create object files from C++ source files. |
|
||||||
$(OBJDIR)/%.o : %.cpp |
|
||||||
@echo |
|
||||||
@echo $(MSG_COMPILING_CPP) $< |
|
||||||
$(CC) -c $(ALL_CPPFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Compile: create assembler files from C source files. |
|
||||||
%.s : %.c |
|
||||||
$(CC) -S $(ALL_CFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Compile: create assembler files from C++ source files. |
|
||||||
%.s : %.cpp |
|
||||||
$(CC) -S $(ALL_CPPFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Assemble: create object files from assembler source files. |
|
||||||
$(OBJDIR)/%.o : %.S |
|
||||||
@echo |
|
||||||
@echo $(MSG_ASSEMBLING) $< |
|
||||||
$(CC) -c $(ALL_ASFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Create preprocessed source for use in sending a bug report. |
|
||||||
%.i : %.c |
|
||||||
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Target: clean project. |
|
||||||
clean: begin clean_list end |
|
||||||
|
|
||||||
clean_list : |
|
||||||
@echo |
|
||||||
@echo $(MSG_CLEANING) |
|
||||||
$(REMOVE) $(TARGET).hex |
|
||||||
$(REMOVE) $(TARGET).cof |
|
||||||
$(REMOVE) $(TARGET).elf |
|
||||||
$(REMOVE) $(TARGET).map |
|
||||||
$(REMOVE) $(TARGET).sym |
|
||||||
$(REMOVE) $(TARGET).lss |
|
||||||
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) |
|
||||||
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) |
|
||||||
$(REMOVE) $(SRC:.c=.s) |
|
||||||
$(REMOVE) $(SRC:.c=.d) |
|
||||||
$(REMOVE) $(SRC:.c=.i) |
|
||||||
$(REMOVEDIR) .dep |
|
||||||
|
|
||||||
doxygen: |
|
||||||
@echo Generating Project Documentation \($(TARGET)\)... |
|
||||||
@if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ |
|
||||||
exit 1; \ |
|
||||||
fi; |
|
||||||
@echo Documentation Generation Complete. |
|
||||||
|
|
||||||
clean_doxygen: |
|
||||||
rm -rf Documentation |
|
||||||
|
|
||||||
checksource: |
|
||||||
@for f in $(SRC) $(CPPSRC) $(ASRC); do \ |
|
||||||
if [ -f $$f ]; then \ |
|
||||||
echo "Found Source File: $$f" ; \ |
|
||||||
else \ |
|
||||||
echo "Source File Not Found: $$f" ; \ |
|
||||||
fi; done |
|
||||||
|
|
||||||
|
|
||||||
# Create object files directory |
|
||||||
$(shell mkdir $(OBJDIR) 2>/dev/null) |
|
||||||
|
|
||||||
|
|
||||||
# Include the dependency files. |
|
||||||
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*) |
|
||||||
|
|
||||||
|
|
||||||
# Listing of phony targets. |
|
||||||
.PHONY : all begin finish end sizebefore sizeafter gccversion \ |
|
||||||
build elf hex lss sym doxygen clean clean_list clean_doxygen \ |
|
||||||
dfu flip checksource |
|
||||||
|
|
||||||
@ -1,707 +0,0 @@ |
|||||||
# Hey Emacs, this is a -*- makefile -*- |
|
||||||
#---------------------------------------------------------------------------- |
|
||||||
# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al. |
|
||||||
# >> Modified for use with the LUFA project. << |
|
||||||
# |
|
||||||
# Released to the Public Domain |
|
||||||
# |
|
||||||
# Additional material for this makefile was written by: |
|
||||||
# Peter Fleury |
|
||||||
# Tim Henigan |
|
||||||
# Colin O'Flynn |
|
||||||
# Reiner Patommel |
|
||||||
# Markus Pfaff |
|
||||||
# Sander Pool |
|
||||||
# Frederik Rouleau |
|
||||||
# Carlos Lamas |
|
||||||
# Dean Camera |
|
||||||
# Opendous Inc. |
|
||||||
# Denver Gingerich |
|
||||||
# |
|
||||||
#---------------------------------------------------------------------------- |
|
||||||
# On command line: |
|
||||||
# |
|
||||||
# make all = Make software. |
|
||||||
# |
|
||||||
# make clean = Clean out built project files. |
|
||||||
# |
|
||||||
# make coff = Convert ELF to AVR COFF. |
|
||||||
# |
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF. |
|
||||||
# |
|
||||||
# make program = Download the hex file to the device, using avrdude. |
|
||||||
# Please customize the avrdude settings below first! |
|
||||||
# |
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must |
|
||||||
# have dfu-programmer installed). |
|
||||||
# |
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must |
|
||||||
# have Atmel FLIP installed). |
|
||||||
# |
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer |
|
||||||
# (must have dfu-programmer installed). |
|
||||||
# |
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP |
|
||||||
# (must have Atmel FLIP installed). |
|
||||||
# |
|
||||||
# make doxygen = Generate DoxyGen documentation for the project (must have |
|
||||||
# DoxyGen installed) |
|
||||||
# |
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging, |
|
||||||
# with avr-gdb or avr-insight as the front end for debugging. |
|
||||||
# |
|
||||||
# make filename.s = Just compile filename.c into the assembler code only. |
|
||||||
# |
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting |
|
||||||
# bug reports to the GCC project. |
|
||||||
# |
|
||||||
# To rebuild project do "make clean" then "make all". |
|
||||||
#---------------------------------------------------------------------------- |
|
||||||
|
|
||||||
|
|
||||||
# MCU name |
|
||||||
MCU = ### INSERT NAME OF MICROCONTROLLER MODEL HERE ### |
|
||||||
|
|
||||||
|
|
||||||
# Targeted chip architecture (see library "Architectures" documentation) |
|
||||||
ARCH = XMEGA |
|
||||||
|
|
||||||
|
|
||||||
# Target board (see library "Board Types" documentation, NONE for projects not requiring |
|
||||||
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called |
|
||||||
# "Board" inside the application directory. |
|
||||||
BOARD = ### INSERT NAME OF BOARD HERE, OR NONE IF NO BOARD DRIVERS USED ### |
|
||||||
|
|
||||||
|
|
||||||
# Processor frequency. |
|
||||||
# This will define a symbol, F_CPU, in all source code files equal to the |
|
||||||
# processor frequency in Hz. You can then use this symbol in your source code to |
|
||||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done |
|
||||||
# automatically to create a 32-bit value in your source code. |
|
||||||
# |
|
||||||
# This should be the frequency the system core runs at, after the system clock |
|
||||||
# has been set up correctly and started. |
|
||||||
F_CPU = ### INSERT PRESCALED SYSTEM CLOCK SPEED HERE, IN HZ ### |
|
||||||
|
|
||||||
|
|
||||||
# USB controller master clock frequency. |
|
||||||
# This will define a symbol, F_USB, in all source code files equal to the |
|
||||||
# input clock frequency of the USB controller's clock generator in Hz. |
|
||||||
# |
|
||||||
# For the XMEGA chips, this should be equal to a multiple of 6MHz for Low |
|
||||||
# Speed USB mode, or a multiple of 48MHz for Full Speed USB mode. |
|
||||||
F_USB = ### INSERT CLOCK TO USB MODULE HERE, IN HZ ### |
|
||||||
|
|
||||||
|
|
||||||
# Output format. (can be srec, ihex, binary) |
|
||||||
FORMAT = ihex |
|
||||||
|
|
||||||
|
|
||||||
# Target file name (without extension). |
|
||||||
TARGET = ### INSERT NAME OF MAIN FILENAME HERE, WITHOUT EXTENSION ### |
|
||||||
|
|
||||||
|
|
||||||
# Object files directory |
|
||||||
# To put object files in current directory, use a dot (.), do NOT make |
|
||||||
# this an empty or blank macro! |
|
||||||
OBJDIR = . |
|
||||||
|
|
||||||
|
|
||||||
# Path to the LUFA library |
|
||||||
LUFA_PATH = ### INSERT PATH TO LUFA LIBRARY RELATIVE TO PROJECT DIRECTORY HERE ### |
|
||||||
|
|
||||||
|
|
||||||
# LUFA library compile-time options and predefined tokens (add '-D' before each token) |
|
||||||
LUFA_OPTS = ### INSERT LUFA COMPILE TIME TOKENS HERE ### |
|
||||||
|
|
||||||
|
|
||||||
# Create the LUFA source path variables by including the LUFA root makefile |
|
||||||
include $(LUFA_PATH)/LUFA/makefile |
|
||||||
|
|
||||||
|
|
||||||
# List C source files here. (C dependencies are automatically generated.) |
|
||||||
SRC = $(TARGET).c \ |
|
||||||
$(LUFA_SRC_USB) \ |
|
||||||
$(LUFA_SRC_USBCLASS) |
|
||||||
### INSERT ADDITIONAL PROJECT SOURCE FILENAMES OR LUFA MODULE NAMES HERE ### |
|
||||||
|
|
||||||
|
|
||||||
# List C++ source files here. (C dependencies are automatically generated.) |
|
||||||
CPPSRC = |
|
||||||
|
|
||||||
|
|
||||||
# List Assembler source files here. |
|
||||||
# Make them always end in a capital .S. Files ending in a lowercase .s |
|
||||||
# will not be considered source files but generated files (assembler |
|
||||||
# output from the compiler), and will be deleted upon "make clean"! |
|
||||||
# Even though the DOS/Win* filesystem matches both .s and .S the same, |
|
||||||
# it will preserve the spelling of the filenames, and gcc itself does |
|
||||||
# care about how the name is spelled on its command-line. |
|
||||||
ASRC = |
|
||||||
|
|
||||||
|
|
||||||
# Optimization level, can be [0, 1, 2, 3, s]. |
|
||||||
# 0 = turn off optimization. s = optimize for size. |
|
||||||
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) |
|
||||||
OPT = s |
|
||||||
|
|
||||||
|
|
||||||
# List any extra directories to look for include files here. |
|
||||||
# Each directory must be seperated by a space. |
|
||||||
# Use forward slashes for directory separators. |
|
||||||
# For a directory that has spaces, enclose it in quotes. |
|
||||||
EXTRAINCDIRS = $(LUFA_PATH)/ |
|
||||||
|
|
||||||
|
|
||||||
# Compiler flag to set the C Standard level. |
|
||||||
# c89 = "ANSI" C |
|
||||||
# gnu89 = c89 plus GCC extensions |
|
||||||
# c99 = ISO C99 standard (not yet fully implemented) |
|
||||||
# gnu99 = c99 plus GCC extensions |
|
||||||
CSTANDARD = -std=gnu99 |
|
||||||
|
|
||||||
|
|
||||||
# Place -D or -U options here for C sources |
|
||||||
CDEFS = -DF_CPU=$(F_CPU)UL |
|
||||||
CDEFS += -DF_USB=$(F_USB)UL |
|
||||||
CDEFS += -DBOARD=BOARD_$(BOARD) |
|
||||||
CDEFS += -DARCH=ARCH_$(ARCH) |
|
||||||
CDEFS += $(LUFA_OPTS) |
|
||||||
|
|
||||||
|
|
||||||
# Place -D or -U options here for ASM sources |
|
||||||
ADEFS = -DF_CPU=$(F_CPU) |
|
||||||
ADEFS += -DF_USB=$(F_USB)UL |
|
||||||
ADEFS += -DBOARD=BOARD_$(BOARD) |
|
||||||
ADEFS += -DARCH=ARCH_$(ARCH) |
|
||||||
ADEFS += $(LUFA_OPTS) |
|
||||||
|
|
||||||
# Place -D or -U options here for C++ sources |
|
||||||
CPPDEFS = -DF_CPU=$(F_CPU)UL |
|
||||||
CPPDEFS += -DF_USB=$(F_USB)UL |
|
||||||
CPPDEFS += -DBOARD=BOARD_$(BOARD) |
|
||||||
CPPDEFS += -DARCH=ARCH_$(ARCH) |
|
||||||
CPPDEFS += $(LUFA_OPTS) |
|
||||||
|
|
||||||
|
|
||||||
# Debugging format. |
|
||||||
# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs. |
|
||||||
# AVR Studio 4.10 requires dwarf-2. |
|
||||||
# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run. |
|
||||||
DEBUG = dwarf-2 |
|
||||||
|
|
||||||
|
|
||||||
#---------------- Compiler Options C ---------------- |
|
||||||
# -g*: generate debugging information |
|
||||||
# -O*: optimization level |
|
||||||
# -f...: tuning, see GCC manual and avr-libc documentation |
|
||||||
# -Wall...: warning level |
|
||||||
# -Wa,...: tell GCC to pass this to the assembler. |
|
||||||
# -adhlns...: create assembler listing |
|
||||||
CFLAGS = -g$(DEBUG) |
|
||||||
CFLAGS += $(CDEFS) |
|
||||||
CFLAGS += -O$(OPT) |
|
||||||
CFLAGS += -funsigned-char |
|
||||||
CFLAGS += -funsigned-bitfields |
|
||||||
CFLAGS += -ffunction-sections |
|
||||||
CFLAGS += -fno-inline-small-functions |
|
||||||
CFLAGS += -fpack-struct |
|
||||||
CFLAGS += -fshort-enums |
|
||||||
CFLAGS += -fno-strict-aliasing |
|
||||||
CFLAGS += -Wall |
|
||||||
CFLAGS += -Wstrict-prototypes |
|
||||||
CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst) |
|
||||||
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) |
|
||||||
CFLAGS += $(CSTANDARD) |
|
||||||
|
|
||||||
|
|
||||||
#---------------- Compiler Options C++ ---------------- |
|
||||||
# -g*: generate debugging information |
|
||||||
# -O*: optimization level |
|
||||||
# -f...: tuning, see GCC manual and avr-libc documentation |
|
||||||
# -Wall...: warning level |
|
||||||
# -Wa,...: tell GCC to pass this to the assembler. |
|
||||||
# -adhlns...: create assembler listing |
|
||||||
CPPFLAGS = -g$(DEBUG) |
|
||||||
CPPFLAGS += $(CPPDEFS) |
|
||||||
CPPFLAGS += -O$(OPT) |
|
||||||
CPPFLAGS += -funsigned-char |
|
||||||
CPPFLAGS += -funsigned-bitfields |
|
||||||
CPPFLAGS += -fpack-struct |
|
||||||
CPPFLAGS += -fshort-enums |
|
||||||
CPPFLAGS += -ffunction-sections |
|
||||||
CPPFLAGS += -fno-strict-aliasing |
|
||||||
CPPFLAGS += -fno-exceptions |
|
||||||
CPPFLAGS += -Wall |
|
||||||
CPPFLAGS += -Wundef |
|
||||||
CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst) |
|
||||||
CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) |
|
||||||
#CPPFLAGS += $(CSTANDARD) |
|
||||||
|
|
||||||
|
|
||||||
#---------------- Assembler Options ---------------- |
|
||||||
# -Wa,...: tell GCC to pass this to the assembler. |
|
||||||
# -adhlns: create listing |
|
||||||
# -gstabs: have the assembler create line number information; note that |
|
||||||
# for use in COFF files, additional information about filenames |
|
||||||
# and function names needs to be present in the assembler source |
|
||||||
# files -- see avr-libc docs [FIXME: not yet described there] |
|
||||||
# -listing-cont-lines: Sets the maximum number of continuation lines of hex |
|
||||||
# dump that will be displayed for a given single line of source input. |
|
||||||
ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100 |
|
||||||
|
|
||||||
|
|
||||||
#---------------- Library Options ---------------- |
|
||||||
# Minimalistic printf version |
|
||||||
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min |
|
||||||
|
|
||||||
# Floating point printf version (requires MATH_LIB = -lm below) |
|
||||||
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt |
|
||||||
|
|
||||||
# If this is left blank, then it will use the Standard printf version. |
|
||||||
PRINTF_LIB = |
|
||||||
#PRINTF_LIB = $(PRINTF_LIB_MIN) |
|
||||||
#PRINTF_LIB = $(PRINTF_LIB_FLOAT) |
|
||||||
|
|
||||||
|
|
||||||
# Minimalistic scanf version |
|
||||||
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min |
|
||||||
|
|
||||||
# Floating point + %[ scanf version (requires MATH_LIB = -lm below) |
|
||||||
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt |
|
||||||
|
|
||||||
# If this is left blank, then it will use the Standard scanf version. |
|
||||||
SCANF_LIB = |
|
||||||
#SCANF_LIB = $(SCANF_LIB_MIN) |
|
||||||
#SCANF_LIB = $(SCANF_LIB_FLOAT) |
|
||||||
|
|
||||||
|
|
||||||
MATH_LIB = -lm |
|
||||||
|
|
||||||
|
|
||||||
# List any extra directories to look for libraries here. |
|
||||||
# Each directory must be seperated by a space. |
|
||||||
# Use forward slashes for directory separators. |
|
||||||
# For a directory that has spaces, enclose it in quotes. |
|
||||||
EXTRALIBDIRS = |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#---------------- External Memory Options ---------------- |
|
||||||
|
|
||||||
# 64 KB of external RAM, starting after internal RAM (ATmega128!), |
|
||||||
# used for variables (.data/.bss) and heap (malloc()). |
|
||||||
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff |
|
||||||
|
|
||||||
# 64 KB of external RAM, starting after internal RAM (ATmega128!), |
|
||||||
# only used for heap (malloc()). |
|
||||||
#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff |
|
||||||
|
|
||||||
EXTMEMOPTS = |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#---------------- Linker Options ---------------- |
|
||||||
# -Wl,...: tell GCC to pass this to linker. |
|
||||||
# -Map: create map file |
|
||||||
# --cref: add cross reference to map file |
|
||||||
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref |
|
||||||
LDFLAGS += -Wl,--relax |
|
||||||
LDFLAGS += -Wl,--gc-sections |
|
||||||
LDFLAGS += $(EXTMEMOPTS) |
|
||||||
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) |
|
||||||
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB) |
|
||||||
#LDFLAGS += -T linker_script.x |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#---------------- Programming Options (avrdude) ---------------- |
|
||||||
|
|
||||||
# Programming hardware |
|
||||||
# Type: avrdude -c ? |
|
||||||
# to get a full listing. |
|
||||||
# |
|
||||||
AVRDUDE_PROGRAMMER = jtagmkII |
|
||||||
|
|
||||||
# com1 = serial port. Use lpt1 to connect to parallel port. |
|
||||||
AVRDUDE_PORT = usb |
|
||||||
|
|
||||||
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex |
|
||||||
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep |
|
||||||
|
|
||||||
|
|
||||||
# Uncomment the following if you want avrdude's erase cycle counter. |
|
||||||
# Note that this counter needs to be initialized first using -Yn, |
|
||||||
# see avrdude manual. |
|
||||||
#AVRDUDE_ERASE_COUNTER = -y |
|
||||||
|
|
||||||
# Uncomment the following if you do /not/ wish a verification to be |
|
||||||
# performed after programming the device. |
|
||||||
#AVRDUDE_NO_VERIFY = -V |
|
||||||
|
|
||||||
# Increase verbosity level. Please use this when submitting bug |
|
||||||
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> |
|
||||||
# to submit bug reports. |
|
||||||
#AVRDUDE_VERBOSE = -v -v |
|
||||||
|
|
||||||
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) |
|
||||||
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY) |
|
||||||
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE) |
|
||||||
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER) |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#---------------- Debugging Options ---------------- |
|
||||||
|
|
||||||
# For simulavr only - target MCU frequency. |
|
||||||
DEBUG_MFREQ = $(F_CPU) |
|
||||||
|
|
||||||
# Set the DEBUG_UI to either gdb or insight. |
|
||||||
# DEBUG_UI = gdb |
|
||||||
DEBUG_UI = insight |
|
||||||
|
|
||||||
# Set the debugging back-end to either avarice, simulavr. |
|
||||||
DEBUG_BACKEND = avarice |
|
||||||
#DEBUG_BACKEND = simulavr |
|
||||||
|
|
||||||
# GDB Init Filename. |
|
||||||
GDBINIT_FILE = __avr_gdbinit |
|
||||||
|
|
||||||
# When using avarice settings for the JTAG |
|
||||||
JTAG_DEV = /dev/com1 |
|
||||||
|
|
||||||
# Debugging port used to communicate between GDB / avarice / simulavr. |
|
||||||
DEBUG_PORT = 4242 |
|
||||||
|
|
||||||
# Debugging host used to communicate between GDB / avarice / simulavr, normally |
|
||||||
# just set to localhost unless doing some sort of crazy debugging when |
|
||||||
# avarice is running on a different computer. |
|
||||||
DEBUG_HOST = localhost |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#============================================================================ |
|
||||||
|
|
||||||
|
|
||||||
# Define programs and commands. |
|
||||||
SHELL = sh |
|
||||||
CC = avr-gcc |
|
||||||
OBJCOPY = avr-objcopy |
|
||||||
OBJDUMP = avr-objdump |
|
||||||
SIZE = avr-size |
|
||||||
AR = avr-ar rcs |
|
||||||
NM = avr-nm |
|
||||||
AVRDUDE = avrdude |
|
||||||
REMOVE = rm -f |
|
||||||
REMOVEDIR = rm -rf |
|
||||||
COPY = cp |
|
||||||
WINSHELL = cmd |
|
||||||
|
|
||||||
|
|
||||||
# Define Messages |
|
||||||
# English |
|
||||||
MSG_ERRORS_NONE = Errors: none |
|
||||||
MSG_BEGIN = -------- begin -------- |
|
||||||
MSG_END = -------- end -------- |
|
||||||
MSG_SIZE_BEFORE = Size before: |
|
||||||
MSG_SIZE_AFTER = Size after: |
|
||||||
MSG_COFF = Converting to AVR COFF: |
|
||||||
MSG_EXTENDED_COFF = Converting to AVR Extended COFF: |
|
||||||
MSG_FLASH = Creating load file for Flash: |
|
||||||
MSG_EEPROM = Creating load file for EEPROM: |
|
||||||
MSG_EXTENDED_LISTING = Creating Extended Listing: |
|
||||||
MSG_SYMBOL_TABLE = Creating Symbol Table: |
|
||||||
MSG_LINKING = Linking: |
|
||||||
MSG_COMPILING = Compiling C: |
|
||||||
MSG_COMPILING_CPP = Compiling C++: |
|
||||||
MSG_ASSEMBLING = Assembling: |
|
||||||
MSG_CLEANING = Cleaning project: |
|
||||||
MSG_CREATING_LIBRARY = Creating library: |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Define all object files. |
|
||||||
OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) |
|
||||||
|
|
||||||
# Define all listing files. |
|
||||||
LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) |
|
||||||
|
|
||||||
|
|
||||||
# Compiler flags to generate dependency files. |
|
||||||
GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d |
|
||||||
|
|
||||||
|
|
||||||
# Combine all necessary flags and optional flags. |
|
||||||
# Add target processor to flags. |
|
||||||
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS) |
|
||||||
ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS) |
|
||||||
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Default target. |
|
||||||
all: begin gccversion sizebefore build sizeafter end |
|
||||||
|
|
||||||
# Change the build target to build a HEX file or a library. |
|
||||||
build: elf hex eep lss sym |
|
||||||
#build: lib |
|
||||||
|
|
||||||
|
|
||||||
elf: $(TARGET).elf |
|
||||||
hex: $(TARGET).hex |
|
||||||
eep: $(TARGET).eep |
|
||||||
lss: $(TARGET).lss |
|
||||||
sym: $(TARGET).sym |
|
||||||
LIBNAME=lib$(TARGET).a |
|
||||||
lib: $(LIBNAME) |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Eye candy. |
|
||||||
# AVR Studio 3.x does not check make's exit code but relies on |
|
||||||
# the following magic strings to be generated by the compile job. |
|
||||||
begin: |
|
||||||
@echo |
|
||||||
@echo $(MSG_BEGIN) |
|
||||||
|
|
||||||
end: |
|
||||||
@echo $(MSG_END) |
|
||||||
@echo |
|
||||||
|
|
||||||
|
|
||||||
# Display size of file. |
|
||||||
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex |
|
||||||
ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf |
|
||||||
MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) ) |
|
||||||
FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr ) |
|
||||||
|
|
||||||
|
|
||||||
sizebefore: |
|
||||||
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \ |
|
||||||
2>/dev/null; echo; fi |
|
||||||
|
|
||||||
sizeafter: |
|
||||||
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ |
|
||||||
2>/dev/null; echo; fi |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Display compiler version information. |
|
||||||
gccversion : |
|
||||||
@$(CC) --version |
|
||||||
|
|
||||||
|
|
||||||
# Program the device. |
|
||||||
program: $(TARGET).hex $(TARGET).eep |
|
||||||
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) |
|
||||||
|
|
||||||
flip: $(TARGET).hex |
|
||||||
batchisp -hardware usb -device $(MCU) -operation erase f |
|
||||||
batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program |
|
||||||
batchisp -hardware usb -device $(MCU) -operation start reset 0 |
|
||||||
|
|
||||||
dfu: $(TARGET).hex |
|
||||||
dfu-programmer $(MCU) erase |
|
||||||
dfu-programmer $(MCU) flash $(TARGET).hex |
|
||||||
dfu-programmer $(MCU) reset |
|
||||||
|
|
||||||
flip-ee: $(TARGET).hex $(TARGET).eep |
|
||||||
$(COPY) $(TARGET).eep $(TARGET)eep.hex |
|
||||||
batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase |
|
||||||
batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program |
|
||||||
batchisp -hardware usb -device $(MCU) -operation start reset 0 |
|
||||||
$(REMOVE) $(TARGET)eep.hex |
|
||||||
|
|
||||||
dfu-ee: $(TARGET).hex $(TARGET).eep |
|
||||||
dfu-programmer $(MCU) eeprom-flash $(TARGET).eep |
|
||||||
dfu-programmer $(MCU) reset |
|
||||||
|
|
||||||
|
|
||||||
# Generate avr-gdb config/init file which does the following: |
|
||||||
# define the reset signal, load the target file, connect to target, and set |
|
||||||
# a breakpoint at main(). |
|
||||||
gdb-config: |
|
||||||
@$(REMOVE) $(GDBINIT_FILE) |
|
||||||
@echo define reset >> $(GDBINIT_FILE) |
|
||||||
@echo SIGNAL SIGHUP >> $(GDBINIT_FILE) |
|
||||||
@echo end >> $(GDBINIT_FILE) |
|
||||||
@echo file $(TARGET).elf >> $(GDBINIT_FILE) |
|
||||||
@echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE) |
|
||||||
ifeq ($(DEBUG_BACKEND),simulavr) |
|
||||||
@echo load >> $(GDBINIT_FILE) |
|
||||||
endif |
|
||||||
@echo break main >> $(GDBINIT_FILE) |
|
||||||
|
|
||||||
debug: gdb-config $(TARGET).elf |
|
||||||
ifeq ($(DEBUG_BACKEND), avarice) |
|
||||||
@echo Starting AVaRICE - Press enter when "waiting to connect" message displays. |
|
||||||
@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \ |
|
||||||
$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT) |
|
||||||
@$(WINSHELL) /c pause |
|
||||||
|
|
||||||
else |
|
||||||
@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \ |
|
||||||
$(DEBUG_MFREQ) --port $(DEBUG_PORT) |
|
||||||
endif |
|
||||||
@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE) |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. |
|
||||||
COFFCONVERT = $(OBJCOPY) --debugging |
|
||||||
COFFCONVERT += --change-section-address .data-0x800000 |
|
||||||
COFFCONVERT += --change-section-address .bss-0x800000 |
|
||||||
COFFCONVERT += --change-section-address .noinit-0x800000 |
|
||||||
COFFCONVERT += --change-section-address .eeprom-0x810000 |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
coff: $(TARGET).elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_COFF) $(TARGET).cof |
|
||||||
$(COFFCONVERT) -O coff-avr $< $(TARGET).cof |
|
||||||
|
|
||||||
|
|
||||||
extcoff: $(TARGET).elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_EXTENDED_COFF) $(TARGET).cof |
|
||||||
$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Create final output files (.hex, .eep) from ELF output file. |
|
||||||
%.hex: %.elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_FLASH) $@ |
|
||||||
$(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature $< $@ |
|
||||||
|
|
||||||
%.eep: %.elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_EEPROM) $@ |
|
||||||
-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ |
|
||||||
--change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0 |
|
||||||
|
|
||||||
# Create extended listing file from ELF output file. |
|
||||||
%.lss: %.elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_EXTENDED_LISTING) $@ |
|
||||||
$(OBJDUMP) -h -S -z $< > $@ |
|
||||||
|
|
||||||
# Create a symbol table from ELF output file. |
|
||||||
%.sym: %.elf |
|
||||||
@echo |
|
||||||
@echo $(MSG_SYMBOL_TABLE) $@ |
|
||||||
$(NM) -n $< > $@ |
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
# Create library from object files. |
|
||||||
.SECONDARY : $(TARGET).a |
|
||||||
.PRECIOUS : $(OBJ) |
|
||||||
%.a: $(OBJ) |
|
||||||
@echo |
|
||||||
@echo $(MSG_CREATING_LIBRARY) $@ |
|
||||||
$(AR) $@ $(OBJ) |
|
||||||
|
|
||||||
|
|
||||||
# Link: create ELF output file from object files. |
|
||||||
.SECONDARY : $(TARGET).elf |
|
||||||
.PRECIOUS : $(OBJ) |
|
||||||
%.elf: $(OBJ) |
|
||||||
@echo |
|
||||||
@echo $(MSG_LINKING) $@ |
|
||||||
$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS) |
|
||||||
|
|
||||||
|
|
||||||
# Compile: create object files from C source files. |
|
||||||
$(OBJDIR)/%.o : %.c |
|
||||||
@echo |
|
||||||
@echo $(MSG_COMPILING) $< |
|
||||||
$(CC) -c $(ALL_CFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Compile: create object files from C++ source files. |
|
||||||
$(OBJDIR)/%.o : %.cpp |
|
||||||
@echo |
|
||||||
@echo $(MSG_COMPILING_CPP) $< |
|
||||||
$(CC) -c $(ALL_CPPFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Compile: create assembler files from C source files. |
|
||||||
%.s : %.c |
|
||||||
$(CC) -S $(ALL_CFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Compile: create assembler files from C++ source files. |
|
||||||
%.s : %.cpp |
|
||||||
$(CC) -S $(ALL_CPPFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Assemble: create object files from assembler source files. |
|
||||||
$(OBJDIR)/%.o : %.S |
|
||||||
@echo |
|
||||||
@echo $(MSG_ASSEMBLING) $< |
|
||||||
$(CC) -c $(ALL_ASFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Create preprocessed source for use in sending a bug report. |
|
||||||
%.i : %.c |
|
||||||
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ |
|
||||||
|
|
||||||
|
|
||||||
# Target: clean project. |
|
||||||
clean: begin clean_list end |
|
||||||
|
|
||||||
clean_list : |
|
||||||
@echo |
|
||||||
@echo $(MSG_CLEANING) |
|
||||||
$(REMOVE) $(TARGET).hex |
|
||||||
$(REMOVE) $(TARGET).eep |
|
||||||
$(REMOVE) $(TARGET).cof |
|
||||||
$(REMOVE) $(TARGET).elf |
|
||||||
$(REMOVE) $(TARGET).map |
|
||||||
$(REMOVE) $(TARGET).sym |
|
||||||
$(REMOVE) $(TARGET).lss |
|
||||||
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) |
|
||||||
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) |
|
||||||
$(REMOVE) $(SRC:.c=.s) |
|
||||||
$(REMOVE) $(SRC:.c=.d) |
|
||||||
$(REMOVE) $(SRC:.c=.i) |
|
||||||
$(REMOVEDIR) .dep |
|
||||||
|
|
||||||
doxygen: |
|
||||||
@echo Generating Project Documentation \($(TARGET)\)... |
|
||||||
@if ( ( cat Doxygen.conf ; echo "HTML_STYLESHEET=$(LUFA_PATH)/LUFA/DoxygenPages/Style/Style.css" ) | doxygen - 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \ |
|
||||||
exit 1; \ |
|
||||||
fi; |
|
||||||
@echo Documentation Generation Complete. |
|
||||||
|
|
||||||
clean_doxygen: |
|
||||||
rm -rf Documentation |
|
||||||
|
|
||||||
checksource: |
|
||||||
@for f in $(SRC) $(CPPSRC) $(ASRC); do \ |
|
||||||
if [ -f $$f ]; then \ |
|
||||||
echo "Found Source File: $$f" ; \ |
|
||||||
else \ |
|
||||||
echo "Source File Not Found: $$f" ; \ |
|
||||||
fi; done |
|
||||||
|
|
||||||
|
|
||||||
# Create object files directory |
|
||||||
$(shell mkdir $(OBJDIR) 2>/dev/null) |
|
||||||
|
|
||||||
|
|
||||||
# Include the dependency files. |
|
||||||
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*) |
|
||||||
|
|
||||||
|
|
||||||
# Listing of phony targets. |
|
||||||
.PHONY : all begin finish end sizebefore sizeafter gccversion \ |
|
||||||
build elf hex eep lss sym coff extcoff doxygen clean \ |
|
||||||
clean_list clean_doxygen program dfu flip flip-ee dfu-ee \ |
|
||||||
debug gdb-config checksource |
|
||||||
Loading…
Reference in new issue