Keyboard: dactyl manuform 6x6 added (#3662)
* mouse layer keys shifted * mouse layer keys shifted * manuform 5x6 added * mouse layer keys shifted * manuform 5x6 added * dactyl_manuform 5x6 keymap added * reorg. dactyl manuform folder * removed LAYOUTS = ortho_4x12 for 4x5 * Rows and Cols in config.h fixed * MASTER_LEFT * 5x6 matrix fixed * keymap updated * removed the i2c, serial, split_util and matrix files and inserted SPLIT_KEYBOARD * default keymap for dactyl_manuform 5x6 * Fixes for Dactyl Manuform * Add/update default keymap * readme dactyl_manuform updated * links to keymaps added * dactyl_manuform 6x6 added. README updated * dactyl_manuform README updated * cleanup * more cleanuppeb
zwnk
7 years ago
committed by
Drashna Jaelre
parent
4cfdd2cff5
commit
3549415116
@ -1,161 +0,0 @@ |
||||
Dactyl Manuform 4x5 |
||||
====== |
||||
the [Dactyl-Manuform](https://github.com/tshort/dactyl-keyboard) is a split curved keyboard based on the design of [adereth dactyl](https://github.com/adereth/dactyl-keyboard) and thumb cluster design of the [manuform](https://geekhack.org/index.php?topic=46015.0) keyboard, the hardware is similar to the let's split keyboard. all information needed for making one is in the first link. |
||||
 |
||||
|
||||
|
||||
## First Time Setup |
||||
|
||||
Download or clone the `qmk_firmware` repo and navigate to its top level directory. Once your build environment is setup, you'll be able to generate the default .hex using: |
||||
|
||||
``` |
||||
$ make handwired/dactyl_manuform/4x5:dvorak |
||||
``` |
||||
|
||||
You will see a lot of output and if everything worked correctly you will see the built hex file: |
||||
|
||||
``` |
||||
dactyl_manuform_4x5_dvorak.hex |
||||
``` |
||||
|
||||
If you would like to use one of the alternative keymaps, or create your own, copy one of the existing [keymaps](keymaps/) and run make like so: |
||||
|
||||
``` |
||||
$ make handwired/dactyl_manuform/4x5:YOUR_KEYMAP_NAME |
||||
``` |
||||
|
||||
If everything worked correctly you will see a file: |
||||
|
||||
``` |
||||
dactyl_manuform_4x5_YOUR_KEYMAP_NAME.hex |
||||
``` |
||||
|
||||
For more information on customizing keymaps, take a look at the primary documentation for [Customizing Your Keymap](/docs/faq_keymap.md) in the main readme.md. |
||||
|
||||
## Keymaps |
||||
Currently there are only two keymaps: Qwerty and Dvorak, feel free to make changes and contribute your keymap. |
||||
### Qwerty and Dvorak |
||||
Qwerty base layer: |
||||
 |
||||
Dvorak base layer: |
||||
 |
||||
Both keymaps have the same Raise and Lower layers: |
||||
Raise Layer |
||||
 |
||||
Lower Layer |
||||
 |
||||
|
||||
Required Hardware |
||||
----------------- |
||||
|
||||
Apart from diodes and key switches for the keyboard matrix in each half, you |
||||
will need: |
||||
|
||||
* 2 Arduino Pro Micros. You can find these on AliExpress for ≈3.50USD each. |
||||
* 2 TRRS sockets and 1 TRRS cable, or 2 TRS sockets and 1 TRS cable |
||||
|
||||
Alternatively, you can use any sort of cable and socket that has at least 3 |
||||
wires. If you want to use I2C to communicate between halves, you will need a |
||||
cable with at least 4 wires and 2x 4.7kΩ pull-up resistors |
||||
|
||||
Optional Hardware |
||||
----------------- |
||||
A speaker can be hooked-up to either side to the `5` (`C6`) pin and `GND`, and turned on via `AUDIO_ENABLE`. |
||||
|
||||
Wiring |
||||
------ |
||||
|
||||
The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and digital pin 3 (i.e. |
||||
PD0 on the ATmega32u4) between the two Pro Micros. |
||||
|
||||
Next, wire your key matrix to any of the remaining 17 IO pins of the pro micro |
||||
and modify the `matrix.c` accordingly. |
||||
|
||||
The wiring for serial: |
||||
|
||||
 |
||||
|
||||
The wiring for i2c: |
||||
|
||||
 |
||||
|
||||
The pull-up resistors may be placed on either half. It is also possible |
||||
to use 4 resistors and have the pull-ups in both halves, but this is |
||||
unnecessary in simple use cases. |
||||
|
||||
You can change your configuration between serial and i2c by modifying your `config.h` file. |
||||
|
||||
Notes on Software Configuration |
||||
------------------------------- |
||||
|
||||
the keymaps in here are for the 4x5 layout of the keyboard only. |
||||
|
||||
Flashing |
||||
------- |
||||
From the top level `qmk_firmware` directory run `make KEYBOARD:KEYMAP:avrdude` for automatic serial port resolution and flashing. |
||||
Example: `make lets_split/rev2:default:avrdude` |
||||
|
||||
|
||||
Choosing which board to plug the USB cable into (choosing Master) |
||||
-------- |
||||
Because the two boards are identical, the firmware has logic to differentiate the left and right board. |
||||
|
||||
It uses two strategies to figure things out: looking at the EEPROM (memory on the chip) or looking if the current board has the usb cable. |
||||
|
||||
The EEPROM approach requires additional setup (flashing the eeprom) but allows you to swap the usb cable to either side. |
||||
|
||||
The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra. |
||||
|
||||
### Setting the left hand as master |
||||
If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out `EE_HANDS` and comment out `I2C_MASTER_RIGHT` or `MASTER_RIGHT` if for some reason it was set. |
||||
|
||||
### Setting the right hand as master |
||||
If you always plug the usb cable into the right board, add an extra flag to your `config.h` |
||||
``` |
||||
#define MASTER_RIGHT |
||||
``` |
||||
|
||||
### Setting EE_hands to use either hands as master |
||||
If you define `EE_HANDS` in your `config.h`, you will need to set the |
||||
EEPROM for the left and right halves. |
||||
|
||||
The EEPROM is used to store whether the |
||||
half is left handed or right handed. This makes it so that the same firmware |
||||
file will run on both hands instead of having to flash left and right handed |
||||
versions of the firmware to each half. To flash the EEPROM file for the left |
||||
half run: |
||||
``` |
||||
avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-lefthand.eep |
||||
// or the equivalent in dfu-programmer |
||||
|
||||
``` |
||||
and similarly for right half |
||||
``` |
||||
avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-righhand.eep |
||||
// or the equivalent in dfu-programmer |
||||
``` |
||||
|
||||
NOTE: replace `$(COM_PORT)` with the port of your device (e.g. `/dev/ttyACM0`) |
||||
|
||||
After you have flashed the EEPROM, you then need to set `EE_HANDS` in your config.h, rebuild the hex files and reflash. |
||||
|
||||
Note that you need to program both halves, but you have the option of using |
||||
different keymaps for each half. You could program the left half with a QWERTY |
||||
layout and the right half with a Colemak layout using bootmagic's default layout option. |
||||
Then if you connect the left half to a computer by USB the keyboard will use QWERTY and Colemak when the |
||||
right half is connected. |
||||
|
||||
|
||||
Notes on Using Pro Micro 3.3V |
||||
----------------------------- |
||||
|
||||
Do update the `F_CPU` parameter in `rules.mk` to `8000000` which reflects |
||||
the frequency on the 3.3V board. |
||||
|
||||
Also, if the slave board is producing weird characters in certain columns, |
||||
update the following line in `matrix.c` to the following: |
||||
|
||||
``` |
||||
// _delay_us(30); // without this wait read unstable value. |
||||
_delay_us(300); // without this wait read unstable value. |
||||
``` |
||||
@ -1,142 +0,0 @@ |
||||
Dactyl Manuform 5x6 |
||||
====== |
||||
the [Dactyl-Manuform](https://github.com/tshort/dactyl-keyboard) is a split curved keyboard based on the design of [adereth dactyl](https://github.com/adereth/dactyl-keyboard) and thumb cluster design of the [manuform](https://geekhack.org/index.php?topic=46015.0) keyboard, the hardware is similar to the let's split keyboard. all information needed for making one is in the first link. |
||||
 |
||||
|
||||
|
||||
## First Time Setup |
||||
|
||||
Download or clone the `qmk_firmware` repo and navigate to its top level directory. Once your build environment is setup, you'll be able to generate the default .hex using: |
||||
|
||||
``` |
||||
$ make handwired/dactyl_manuform/5x6:YOUR_KEYMAP_NAME |
||||
``` |
||||
|
||||
If everything worked correctly you will see a file: |
||||
|
||||
``` |
||||
dactyl_manuform_5x6_YOUR_KEYMAP_NAME.hex |
||||
``` |
||||
|
||||
For more information on customizing keymaps, take a look at the primary documentation for [Customizing Your Keymap](/docs/faq_keymap.md) in the main readme.md. |
||||
|
||||
## Keymaps |
||||
Currently there are only two keymaps: Qwerty and Dvorak, feel free to make changes and contribute your keymap. |
||||
### Impstyle |
||||
|
||||
|
||||
|
||||
Required Hardware |
||||
----------------- |
||||
|
||||
Apart from diodes and key switches for the keyboard matrix in each half, you |
||||
will need: |
||||
|
||||
* 2 Arduino Pro Micros. You can find these on AliExpress for ≈3.50USD each. |
||||
* 2 TRRS sockets and 1 TRRS cable, or 2 TRS sockets and 1 TRS cable |
||||
|
||||
Alternatively, you can use any sort of cable and socket that has at least 3 |
||||
wires. If you want to use I2C to communicate between halves, you will need a |
||||
cable with at least 4 wires and 2x 4.7kΩ pull-up resistors |
||||
|
||||
Optional Hardware |
||||
----------------- |
||||
A speaker can be hooked-up to either side to the `5` (`C6`) pin and `GND`, and turned on via `AUDIO_ENABLE`. |
||||
|
||||
Wiring |
||||
------ |
||||
|
||||
The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and digital pin 3 (i.e. |
||||
PD0 on the ATmega32u4) between the two Pro Micros. |
||||
|
||||
Next, wire your key matrix to any of the remaining 17 IO pins of the pro micro |
||||
and modify the `matrix.c` accordingly. |
||||
|
||||
The wiring for serial: |
||||
|
||||
 |
||||
|
||||
The wiring for i2c: |
||||
|
||||
 |
||||
|
||||
The pull-up resistors may be placed on either half. It is also possible |
||||
to use 4 resistors and have the pull-ups in both halves, but this is |
||||
unnecessary in simple use cases. |
||||
|
||||
You can change your configuration between serial and i2c by modifying your `config.h` file. |
||||
|
||||
Notes on Software Configuration |
||||
------------------------------- |
||||
|
||||
the keymaps in here are for the 4x5 layout of the keyboard only. |
||||
|
||||
Flashing |
||||
------- |
||||
From the top level `qmk_firmware` directory run `make KEYBOARD:KEYMAP:avrdude` for automatic serial port resolution and flashing. |
||||
Example: `make lets_split/rev2:default:avrdude` |
||||
|
||||
|
||||
Choosing which board to plug the USB cable into (choosing Master) |
||||
-------- |
||||
Because the two boards are identical, the firmware has logic to differentiate the left and right board. |
||||
|
||||
It uses two strategies to figure things out: looking at the EEPROM (memory on the chip) or looking if the current board has the usb cable. |
||||
|
||||
The EEPROM approach requires additional setup (flashing the eeprom) but allows you to swap the usb cable to either side. |
||||
|
||||
The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra. |
||||
|
||||
### Setting the left hand as master |
||||
If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out `EE_HANDS` and comment out `I2C_MASTER_RIGHT` or `MASTER_RIGHT` if for some reason it was set. |
||||
|
||||
### Setting the right hand as master |
||||
If you always plug the usb cable into the right board, add an extra flag to your `config.h` |
||||
``` |
||||
#define MASTER_RIGHT |
||||
``` |
||||
|
||||
### Setting EE_hands to use either hands as master |
||||
If you define `EE_HANDS` in your `config.h`, you will need to set the |
||||
EEPROM for the left and right halves. |
||||
|
||||
The EEPROM is used to store whether the |
||||
half is left handed or right handed. This makes it so that the same firmware |
||||
file will run on both hands instead of having to flash left and right handed |
||||
versions of the firmware to each half. To flash the EEPROM file for the left |
||||
half run: |
||||
``` |
||||
avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-lefthand.eep |
||||
// or the equivalent in dfu-programmer |
||||
|
||||
``` |
||||
and similarly for right half |
||||
``` |
||||
avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-righhand.eep |
||||
// or the equivalent in dfu-programmer |
||||
``` |
||||
|
||||
NOTE: replace `$(COM_PORT)` with the port of your device (e.g. `/dev/ttyACM0`) |
||||
|
||||
After you have flashed the EEPROM, you then need to set `EE_HANDS` in your config.h, rebuild the hex files and reflash. |
||||
|
||||
Note that you need to program both halves, but you have the option of using |
||||
different keymaps for each half. You could program the left half with a QWERTY |
||||
layout and the right half with a Colemak layout using bootmagic's default layout option. |
||||
Then if you connect the left half to a computer by USB the keyboard will use QWERTY and Colemak when the |
||||
right half is connected. |
||||
|
||||
|
||||
Notes on Using Pro Micro 3.3V |
||||
----------------------------- |
||||
|
||||
Do update the `F_CPU` parameter in `rules.mk` to `8000000` which reflects |
||||
the frequency on the 3.3V board. |
||||
|
||||
Also, if the slave board is producing weird characters in certain columns, |
||||
update the following line in `matrix.c` to the following: |
||||
|
||||
``` |
||||
// _delay_us(30); // without this wait read unstable value. |
||||
_delay_us(300); // without this wait read unstable value. |
||||
``` |
||||
@ -0,0 +1,23 @@ |
||||
#include "6x6.h" |
||||
|
||||
|
||||
#ifdef SSD1306OLED |
||||
void led_set_kb(uint8_t usb_led) { |
||||
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
|
||||
led_set_user(usb_led); |
||||
} |
||||
#endif |
||||
|
||||
void matrix_init_kb(void) { |
||||
|
||||
// // green led on
|
||||
// DDRD |= (1<<5);
|
||||
// PORTD &= ~(1<<5);
|
||||
|
||||
// // orange led on
|
||||
// DDRB |= (1<<0);
|
||||
// PORTB &= ~(1<<0);
|
||||
|
||||
matrix_init_user(); |
||||
}; |
||||
|
||||
@ -0,0 +1,44 @@ |
||||
#pragma once |
||||
|
||||
#include "dactyl_manuform.h" |
||||
#include "quantum.h" |
||||
|
||||
|
||||
#ifdef USE_I2C |
||||
#include <stddef.h> |
||||
#ifdef __AVR__ |
||||
#include <avr/io.h> |
||||
#include <avr/interrupt.h> |
||||
#endif |
||||
#endif |
||||
|
||||
#define LAYOUT_6x6(\ |
||||
L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
|
||||
L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
|
||||
L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
|
||||
L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35, \
|
||||
L40, L41, L42, L43, L44, L45, R40, R41, R42, R43, R44, R45, \
|
||||
L52, L53, R52, R53, \
|
||||
L54, L55, R50, R51, \
|
||||
L64, L65, R60, R61, \
|
||||
L62, L63, R62, R63 \
|
||||
) \
|
||||
{ \
|
||||
{ L00, L01, L02, L03, L04, L05 }, \
|
||||
{ L10, L11, L12, L13, L14, L15 }, \
|
||||
{ L20, L21, L22, L23, L24, L25 }, \
|
||||
{ L30, L31, L32, L33, L34, L35 }, \
|
||||
{ L40, L41, L42, L43, L44, L45 }, \
|
||||
{ KC_NO, KC_NO, L52, L53, L54, L55 }, \
|
||||
{ KC_NO, KC_NO, L62, L63, L64, L65 }, \
|
||||
\
|
||||
{ R00, R01, R02, R03, R04, R05 }, \
|
||||
{ R10, R11, R12, R13, R14, R15 }, \
|
||||
{ R20, R21, R22, R23, R24, R25 }, \
|
||||
{ R30, R31, R32, R33, R34, R35 }, \
|
||||
{ R40, R41, R42, R43, R44, R45 }, \
|
||||
{ R50, R51, R52, R53, KC_NO, KC_NO },\
|
||||
{ R60, R61, R62, R63, KC_NO, KC_NO }, \
|
||||
} |
||||
|
||||
|
||||
@ -0,0 +1,33 @@ |
||||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com> |
||||
Copyright 2015 Jack Humbert |
||||
|
||||
This program is free software: you can redistribute it and/or modify |
||||
it under the terms of the GNU General Public License as published by |
||||
the Free Software Foundation, either version 2 of the License, or |
||||
(at your option) any later version. |
||||
|
||||
This program is distributed in the hope that it will be useful, |
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
GNU General Public License for more details. |
||||
|
||||
You should have received a copy of the GNU General Public License |
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/ |
||||
|
||||
#pragma once |
||||
|
||||
#include "config_common.h" |
||||
|
||||
|
||||
#define PRODUCT Dactyl-Manuform (6x6) |
||||
|
||||
/* key matrix size */ |
||||
// Rows are doubled-up
|
||||
#define MATRIX_ROWS 14 |
||||
#define MATRIX_COLS 6 |
||||
|
||||
// wiring of each half
|
||||
#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B5 } |
||||
#define MATRIX_ROW_PINS { F5, F6, F7, B1, B3, B2, B6 } |
||||
@ -0,0 +1,27 @@ |
||||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com> |
||||
|
||||
This program is free software: you can redistribute it and/or modify |
||||
it under the terms of the GNU General Public License as published by |
||||
the Free Software Foundation, either version 2 of the License, or |
||||
(at your option) any later version. |
||||
|
||||
This program is distributed in the hope that it will be useful, |
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
GNU General Public License for more details. |
||||
|
||||
You should have received a copy of the GNU General Public License |
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/ |
||||
|
||||
|
||||
#pragma once |
||||
|
||||
|
||||
#define USE_SERIAL |
||||
|
||||
#define MASTER_LEFT |
||||
// #define MASTER_RIGHT
|
||||
//#define EE_HANDS
|
||||
// Rows are doubled-up
|
||||
@ -0,0 +1,57 @@ |
||||
#include QMK_KEYBOARD_H |
||||
|
||||
extern keymap_config_t keymap_config; |
||||
|
||||
#define _QWERTY 0 |
||||
#define _LOWER 1 |
||||
#define _RAISE 2 |
||||
|
||||
#define RAISE MO(_RAISE) |
||||
#define LOWER MO(_LOWER) |
||||
|
||||
#define _______ KC_TRNS |
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { |
||||
|
||||
[_QWERTY] = LAYOUT_6x6( |
||||
|
||||
KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 ,KC_F10 ,KC_F11 ,KC_F12 , |
||||
KC_ESC , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 ,KC_BSPC, |
||||
KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P ,KC_MINS, |
||||
KC_LSFT, KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L ,KC_SCLN,KC_QUOT, |
||||
KC_LCTL, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M ,KC_COMM,KC_DOT ,KC_SLSH,KC_BSLASH, |
||||
KC_LBRC,KC_RBRC, KC_PLUS, KC_EQL, |
||||
RAISE,KC_SPC, KC_ENT, LOWER, |
||||
KC_TAB,KC_HOME, KC_END, KC_DEL, |
||||
KC_BSPC, KC_GRV, KC_LGUI, KC_LALT |
||||
), |
||||
|
||||
[_LOWER] = LAYOUT_6x6( |
||||
|
||||
KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 ,KC_F10 ,KC_F11 ,KC_F12 , |
||||
KC_TILD,KC_EXLM, KC_AT ,KC_HASH,KC_DLR ,KC_PERC, KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_DEL, |
||||
_______,_______,_______,_______,_______,KC_LBRC, KC_RBRC, KC_P7 , KC_P8 , KC_P9 ,_______,KC_PLUS, |
||||
_______,KC_HOME,KC_PGUP,KC_PGDN,KC_END ,KC_LPRN, KC_RPRN, KC_P4 , KC_P5 , KC_P6 ,KC_MINS,KC_PIPE, |
||||
_______,_______,_______,_______,_______,_______, _______, KC_P1 , KC_P2 , KC_P3 ,KC_EQL ,KC_UNDS, |
||||
_______,KC_PSCR, _______, KC_P0, |
||||
_______,_______, _______,_______, |
||||
_______,_______, _______,_______, |
||||
_______,_______, _______,_______ |
||||
), |
||||
|
||||
[_RAISE] = LAYOUT_6x6( |
||||
|
||||
KC_F12 , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 ,KC_F10 ,KC_F11 , |
||||
_______,_______,_______,_______,_______,KC_LBRC, KC_RBRC,_______,KC_NLCK,KC_INS ,KC_SLCK,KC_MUTE, |
||||
_______,KC_LEFT,KC_UP ,KC_DOWN,KC_RGHT,KC_LPRN, KC_RPRN,KC_MPRV,KC_MPLY,KC_MNXT,_______,KC_VOLU, |
||||
_______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,KC_VOLD, |
||||
_______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,_______, |
||||
|
||||
_______,_______, KC_EQL ,_______, |
||||
_______,_______, _______,_______, |
||||
_______,_______, _______,_______, |
||||
_______,_______, _______,_______ |
||||
), |
||||
|
||||
}; |
||||
|
||||
@ -0,0 +1,21 @@ |
||||
|
||||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
|
||||
Loading…
Reference in new issue