[Keyboard] New Keyboard: Exent (#6985)
* initial commit * thank you mr keebs for making this easy. Added 65_ansi macro made from mrkeebs kle2qmk tool. * split backspace requires an additional row * change k43 to k42 * add in split space bar support for LAYOUT_all * add QMK Configurator support * make default keymap more usable * update readme * Update keyboards/exent/info.json Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/exent/keymaps/default/keymap.c Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/exent/keymaps/default/keymap.c Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/exent/rules.mk Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>better_chibios_wait
MechMerlin
6 years ago
committed by
noroadsleft
parent
23cac6a606
commit
3cb216f381
@ -0,0 +1,53 @@ |
||||
/*
|
||||
Copyright 2019 mechmerlin |
||||
|
||||
This program is free software: you can redistribute it and/or modify |
||||
it under the terms of the GNU General Public License as published by |
||||
the Free Software Foundation, either version 2 of the License, or |
||||
(at your option) any later version. |
||||
|
||||
This program is distributed in the hope that it will be useful, |
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
GNU General Public License for more details. |
||||
|
||||
You should have received a copy of the GNU General Public License |
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/ |
||||
|
||||
#pragma once |
||||
|
||||
#include "config_common.h" |
||||
|
||||
#define VENDOR_ID 0x20A0 |
||||
#define PRODUCT_ID 0x422D |
||||
#define DEVICE_VER 0x0001 |
||||
#define MANUFACTURER Quadcube |
||||
#define PRODUCT Exent |
||||
#define DESCRIPTION 65% Keyboard |
||||
|
||||
#define RGBLED_NUM 18 |
||||
|
||||
#define MATRIX_ROWS 7 |
||||
#define MATRIX_COLS 14 |
||||
|
||||
// 0 1 2 3 4 5 6 7 8 9 A B C D
|
||||
#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6 } |
||||
#define MATRIX_COL_PINS { D7, C2, C3, C4, C5, C6, C7, A7, A6, A5, A4, A3, A1, A0 } |
||||
#define UNUSED_PINS |
||||
|
||||
#define DIODE_DIRECTION COL2ROW |
||||
#define DEBOUNCE 5 |
||||
|
||||
#define BACKLIGHT_LEVELS 1 |
||||
#define RGBLIGHT_ANIMATIONS |
||||
|
||||
#define NO_UART 1 |
||||
|
||||
/* key combination for magic key command */ |
||||
/* defined by default; to change, uncomment and set to the combination you want */ |
||||
// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT)
|
||||
|
||||
/* Bootmagic Lite key configuration */ |
||||
// #define BOOTMAGIC_LITE_ROW 0
|
||||
// #define BOOTMAGIC_LITE_COLUMN 0
|
||||
@ -0,0 +1,90 @@ |
||||
/* Copyright 2019 mechmerlin
|
||||
* |
||||
* This program is free software: you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License as published by |
||||
* the Free Software Foundation, either version 2 of the License, or |
||||
* (at your option) any later version. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
* |
||||
* You should have received a copy of the GNU General Public License |
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/ |
||||
|
||||
#include "exent.h" |
||||
|
||||
#ifdef RGBLIGHT_ENABLE |
||||
|
||||
# include <string.h> |
||||
# include "i2c_master.h" |
||||
# include "rgblight.h" |
||||
|
||||
extern rgblight_config_t rgblight_config; |
||||
|
||||
void matrix_init_kb(void) { |
||||
i2c_init(); |
||||
// call user level keymaps, if any
|
||||
matrix_init_user(); |
||||
} |
||||
|
||||
// custom RGB driver
|
||||
void rgblight_set(void) { |
||||
if (!rgblight_config.enable) { |
||||
memset(led, 0, 3 * RGBLED_NUM); |
||||
} |
||||
|
||||
i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); |
||||
} |
||||
|
||||
bool rgb_init = false; |
||||
|
||||
void matrix_scan_kb(void) { |
||||
// if LEDs were previously on before poweroff, turn them back on
|
||||
if (rgb_init == false && rgblight_config.enable) { |
||||
i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); |
||||
rgb_init = true; |
||||
} |
||||
|
||||
rgblight_task(); |
||||
matrix_scan_user(); |
||||
} |
||||
|
||||
#endif |
||||
|
||||
// Optional override functions below.
|
||||
// You can leave any or all of these undefined.
|
||||
// These are only required if you want to perform custom actions.
|
||||
|
||||
/*
|
||||
|
||||
void matrix_init_kb(void) { |
||||
// put your keyboard start-up code here
|
||||
// runs once when the firmware starts up
|
||||
|
||||
matrix_init_user(); |
||||
} |
||||
|
||||
void matrix_scan_kb(void) { |
||||
// put your looping keyboard code here
|
||||
// runs every cycle (a lot)
|
||||
|
||||
matrix_scan_user(); |
||||
} |
||||
|
||||
bool process_record_kb(uint16_t keycode, keyrecord_t *record) { |
||||
// put your per-action keyboard code here
|
||||
// runs for every action, just before processing by the firmware
|
||||
|
||||
return process_record_user(keycode, record); |
||||
} |
||||
|
||||
void led_set_kb(uint8_t usb_led) { |
||||
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
|
||||
|
||||
led_set_user(usb_led); |
||||
} |
||||
|
||||
*/ |
||||
@ -0,0 +1,68 @@ |
||||
/* Copyright 2019 mechmerlin
|
||||
* |
||||
* This program is free software: you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License as published by |
||||
* the Free Software Foundation, either version 2 of the License, or |
||||
* (at your option) any later version. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
* |
||||
* You should have received a copy of the GNU General Public License |
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/ |
||||
#pragma once |
||||
|
||||
#include "quantum.h" |
||||
|
||||
#define ___ KC_NO |
||||
|
||||
#define LAYOUT_all( \ |
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k6d, k53, \
|
||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k52, \
|
||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k51, \
|
||||
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k50, \
|
||||
k40, k41, k42, k44, k45, k46, k47, k48, k49, k4b, k4c, k4d \
|
||||
){ \
|
||||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d }, \
|
||||
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d }, \
|
||||
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d }, \
|
||||
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d }, \
|
||||
{ k40, k41, k42, ___, k44, k45, k46, k47, k48, k49, ___, k4b, k4c, k4d }, \
|
||||
{ k50, k51, k52, k53, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___ }, \
|
||||
{ ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, k6d } \
|
||||
} |
||||
|
||||
#define LAYOUT_65_ansi( \ |
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k53, \
|
||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k52, \
|
||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, k51, \
|
||||
k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k50, \
|
||||
k40, k41, k42, k45, k47, k48, k49, k4b, k4c, k4d \
|
||||
){ \
|
||||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d }, \
|
||||
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d }, \
|
||||
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, ___, k2d }, \
|
||||
{ k30, ___, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d }, \
|
||||
{ k40, k41, k42, ___, ___, k45, ___, k47, k48, k49, ___, k4b, k4c, k4d }, \
|
||||
{ k50, k51, k52, k53, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___ }, \
|
||||
{ ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___ } \
|
||||
} |
||||
|
||||
#define LAYOUT_65_iso( \ |
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k53, \
|
||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k52, \
|
||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, k51, \
|
||||
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, k50, \
|
||||
k40, k41, k42, k45, k47, k48, k49, k4b, k4c, k4d \
|
||||
){ \
|
||||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d }, \
|
||||
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, ___ }, \
|
||||
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d }, \
|
||||
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d }, \
|
||||
{ k40, k41, k42, ___, ___, k45, ___, k47, k48, k49, ___, k4b, k4c, k4d }, \
|
||||
{ k50, k51, k52, k53, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___ }, \
|
||||
{ ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___ } \
|
||||
} |
||||
@ -0,0 +1,20 @@ |
||||
{ |
||||
"keyboard_name": "Exent", |
||||
"url": "", |
||||
"maintainer": "qmk", |
||||
"width": 16, |
||||
"height": 5, |
||||
"layouts": { |
||||
"LAYOUT_all": { |
||||
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2}, {"x":13.75, "y":2, "w":1.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.25}, {"x":6, "y":4, "w":1.25}, {"x":7.25, "y":4, "w":2.75}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}] |
||||
}, |
||||
|
||||
"LAYOUT_65_ansi": { |
||||
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}] |
||||
}, |
||||
|
||||
"LAYOUT_65_iso": { |
||||
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2}, {"x":13.75, "y":1, "w":1.25, "h":2}, {"x":15, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}] |
||||
} |
||||
} |
||||
} |
||||
@ -0,0 +1,19 @@ |
||||
/* Copyright 2019 mechmerlin
|
||||
* |
||||
* This program is free software: you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License as published by |
||||
* the Free Software Foundation, either version 2 of the License, or |
||||
* (at your option) any later version. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
* |
||||
* You should have received a copy of the GNU General Public License |
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/ |
||||
|
||||
#pragma once |
||||
|
||||
// place overrides here
|
||||
@ -0,0 +1,18 @@ |
||||
#include QMK_KEYBOARD_H |
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { |
||||
/* layer 0: qwerty */ |
||||
[0] = LAYOUT_65_ansi( |
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, |
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, |
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, |
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, |
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
|
||||
|
||||
[1] = LAYOUT_65_ansi( |
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, |
||||
BL_TOGG, BL_STEP, BL_INC, BL_DEC, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, |
||||
RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, RGB_SPI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, |
||||
KC_TRNS, RGB_RMOD, RGB_HUD, RGB_SAD, RGB_VAD, RGB_SPD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, |
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
|
||||
}; |
||||
@ -0,0 +1 @@ |
||||
# The default keymap for exent |
||||
@ -0,0 +1,19 @@ |
||||
# exent |
||||
|
||||
65% custom keyboard with large bezels. |
||||
|
||||
Keyboard Maintainer: [mechmerlin](https://github.com/mechmerlin) |
||||
Hardware Supported: Exent PCB |
||||
Hardware Availability: [Geekhack GB](https://geekhack.org/index.php?topic=87213.0) |
||||
|
||||
Make example for this keyboard (after setting up your build environment): |
||||
|
||||
make exent:default |
||||
|
||||
Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](flashing_bootloadhid.md)) |
||||
|
||||
make exent:default:flash |
||||
|
||||
**Reset Key**: Hold down the key located at `k0d`, commonly programmed as Backspace while plugging in the keyboard. |
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
||||
@ -0,0 +1,28 @@ |
||||
# MCU name
|
||||
MCU = atmega32a
|
||||
|
||||
# Bootloader selection
|
||||
# Teensy halfkay
|
||||
# Pro Micro caterina
|
||||
# Atmel DFU atmel-dfu
|
||||
# LUFA DFU lufa-dfu
|
||||
# QMK DFU qmk-dfu
|
||||
# ATmega32A bootloadHID
|
||||
# ATmega328P USBasp
|
||||
BOOTLOADER = bootloadHID
|
||||
|
||||
# build options
|
||||
BOOTMAGIC_ENABLE = no
|
||||
MOUSEKEY_ENABLE = no
|
||||
EXTRAKEY_ENABLE = yes
|
||||
CONSOLE_ENABLE = yes
|
||||
COMMAND_ENABLE = yes
|
||||
BACKLIGHT_ENABLE = no
|
||||
RGBLIGHT_ENABLE = yes
|
||||
RGBLIGHT_CUSTOM_DRIVER = yes
|
||||
|
||||
OPT_DEFS = -DDEBUG_LEVEL=0
|
||||
|
||||
SRC += i2c_master.c
|
||||
|
||||
LAYOUTS = 65_ansi 65_iso
|
||||
@ -0,0 +1,383 @@ |
||||
#pragma once |
||||
|
||||
#include "config.h" |
||||
|
||||
/*
|
||||
General Description: |
||||
This file is an example configuration (with inline documentation) for the USB |
||||
driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is |
||||
also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may |
||||
wire the lines to any other port, as long as D+ is also wired to INT0 (or any |
||||
other hardware interrupt, as long as it is the highest level interrupt, see |
||||
section at the end of this file). |
||||
*/ |
||||
|
||||
/* ---------------------------- Hardware Config ---------------------------- */ |
||||
|
||||
#define USB_CFG_IOPORTNAME D |
||||
/* This is the port where the USB bus is connected. When you configure it to
|
||||
* "B", the registers PORTB, PINB and DDRB will be used. |
||||
*/ |
||||
#define USB_CFG_DMINUS_BIT 3 |
||||
/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected.
|
||||
* This may be any bit in the port. |
||||
*/ |
||||
#define USB_CFG_DPLUS_BIT 2 |
||||
/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected.
|
||||
* This may be any bit in the port. Please note that D+ must also be connected |
||||
* to interrupt pin INT0! [You can also use other interrupts, see section |
||||
* "Optional MCU Description" below, or you can connect D- to the interrupt, as |
||||
* it is required if you use the USB_COUNT_SOF feature. If you use D- for the |
||||
* interrupt, the USB interrupt will also be triggered at Start-Of-Frame |
||||
* markers every millisecond.] |
||||
*/ |
||||
#define USB_CFG_CLOCK_KHZ (F_CPU / 1000) |
||||
/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000,
|
||||
* 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code |
||||
* require no crystal, they tolerate +/- 1% deviation from the nominal |
||||
* frequency. All other rates require a precision of 2000 ppm and thus a |
||||
* crystal! |
||||
* Since F_CPU should be defined to your actual clock rate anyway, you should |
||||
* not need to modify this setting. |
||||
*/ |
||||
#define USB_CFG_CHECK_CRC 0 |
||||
/* Define this to 1 if you want that the driver checks integrity of incoming
|
||||
* data packets (CRC checks). CRC checks cost quite a bit of code size and are |
||||
* currently only available for 18 MHz crystal clock. You must choose |
||||
* USB_CFG_CLOCK_KHZ = 18000 if you enable this option. |
||||
*/ |
||||
|
||||
/* ----------------------- Optional Hardware Config ------------------------ */ |
||||
|
||||
/* #define USB_CFG_PULLUP_IOPORTNAME D */ |
||||
/* If you connect the 1.5k pullup resistor from D- to a port pin instead of
|
||||
* V+, you can connect and disconnect the device from firmware by calling |
||||
* the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h). |
||||
* This constant defines the port on which the pullup resistor is connected. |
||||
*/ |
||||
/* #define USB_CFG_PULLUP_BIT 4 */ |
||||
/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined
|
||||
* above) where the 1.5k pullup resistor is connected. See description |
||||
* above for details. |
||||
*/ |
||||
|
||||
/* --------------------------- Functional Range ---------------------------- */ |
||||
|
||||
#define USB_CFG_HAVE_INTRIN_ENDPOINT 1 |
||||
/* Define this to 1 if you want to compile a version with two endpoints: The
|
||||
* default control endpoint 0 and an interrupt-in endpoint (any other endpoint |
||||
* number). |
||||
*/ |
||||
#define USB_CFG_HAVE_INTRIN_ENDPOINT3 1 |
||||
/* Define this to 1 if you want to compile a version with three endpoints: The
|
||||
* default control endpoint 0, an interrupt-in endpoint 3 (or the number |
||||
* configured below) and a catch-all default interrupt-in endpoint as above. |
||||
* You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature. |
||||
*/ |
||||
#define USB_CFG_EP3_NUMBER 3 |
||||
/* If the so-called endpoint 3 is used, it can now be configured to any other
|
||||
* endpoint number (except 0) with this macro. Default if undefined is 3. |
||||
*/ |
||||
/* #define USB_INITIAL_DATATOKEN USBPID_DATA1 */ |
||||
/* The above macro defines the startup condition for data toggling on the
|
||||
* interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1. |
||||
* Since the token is toggled BEFORE sending any data, the first packet is |
||||
* sent with the oposite value of this configuration! |
||||
*/ |
||||
#define USB_CFG_IMPLEMENT_HALT 0 |
||||
/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature
|
||||
* for endpoint 1 (interrupt endpoint). Although you may not need this feature, |
||||
* it is required by the standard. We have made it a config option because it |
||||
* bloats the code considerably. |
||||
*/ |
||||
#define USB_CFG_SUPPRESS_INTR_CODE 0 |
||||
/* Define this to 1 if you want to declare interrupt-in endpoints, but don't
|
||||
* want to send any data over them. If this macro is defined to 1, functions |
||||
* usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if |
||||
* you need the interrupt-in endpoints in order to comply to an interface |
||||
* (e.g. HID), but never want to send any data. This option saves a couple |
||||
* of bytes in flash memory and the transmit buffers in RAM. |
||||
*/ |
||||
#define USB_CFG_INTR_POLL_INTERVAL 1 |
||||
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
|
||||
* interval. The value is in milliseconds and must not be less than 10 ms for |
||||
* low speed devices. |
||||
*/ |
||||
#define USB_CFG_IS_SELF_POWERED 0 |
||||
/* Define this to 1 if the device has its own power supply. Set it to 0 if the
|
||||
* device is powered from the USB bus. |
||||
*/ |
||||
#define USB_CFG_MAX_BUS_POWER 500 |
||||
/* Set this variable to the maximum USB bus power consumption of your device.
|
||||
* The value is in milliamperes. [It will be divided by two since USB |
||||
* communicates power requirements in units of 2 mA.] |
||||
*/ |
||||
#define USB_CFG_IMPLEMENT_FN_WRITE 1 |
||||
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out
|
||||
* transfers. Set it to 0 if you don't need it and want to save a couple of |
||||
* bytes. |
||||
*/ |
||||
#define USB_CFG_IMPLEMENT_FN_READ 0 |
||||
/* Set this to 1 if you need to send control replies which are generated
|
||||
* "on the fly" when usbFunctionRead() is called. If you only want to send |
||||
* data from a static buffer, set it to 0 and return the data from |
||||
* usbFunctionSetup(). This saves a couple of bytes. |
||||
*/ |
||||
#define USB_CFG_IMPLEMENT_FN_WRITEOUT 0 |
||||
/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints.
|
||||
* You must implement the function usbFunctionWriteOut() which receives all |
||||
* interrupt/bulk data sent to any endpoint other than 0. The endpoint number |
||||
* can be found in 'usbRxToken'. |
||||
*/ |
||||
#define USB_CFG_HAVE_FLOWCONTROL 0 |
||||
/* Define this to 1 if you want flowcontrol over USB data. See the definition
|
||||
* of the macros usbDisableAllRequests() and usbEnableAllRequests() in |
||||
* usbdrv.h. |
||||
*/ |
||||
#define USB_CFG_DRIVER_FLASH_PAGE 0 |
||||
/* If the device has more than 64 kBytes of flash, define this to the 64 k page
|
||||
* where the driver's constants (descriptors) are located. Or in other words: |
||||
* Define this to 1 for boot loaders on the ATMega128. |
||||
*/ |
||||
#define USB_CFG_LONG_TRANSFERS 0 |
||||
/* Define this to 1 if you want to send/receive blocks of more than 254 bytes
|
||||
* in a single control-in or control-out transfer. Note that the capability |
||||
* for long transfers increases the driver size. |
||||
*/ |
||||
/* #define USB_RX_USER_HOOK(data, len) if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */ |
||||
/* This macro is a hook if you want to do unconventional things. If it is
|
||||
* defined, it's inserted at the beginning of received message processing. |
||||
* If you eat the received message and don't want default processing to |
||||
* proceed, do a return after doing your things. One possible application |
||||
* (besides debugging) is to flash a status LED on each packet. |
||||
*/ |
||||
/* #define USB_RESET_HOOK(resetStarts) if(!resetStarts){hadUsbReset();} */ |
||||
/* This macro is a hook if you need to know when an USB RESET occurs. It has
|
||||
* one parameter which distinguishes between the start of RESET state and its |
||||
* end. |
||||
*/ |
||||
/* #define USB_SET_ADDRESS_HOOK() hadAddressAssigned(); */ |
||||
/* This macro (if defined) is executed when a USB SET_ADDRESS request was
|
||||
* received. |
||||
*/ |
||||
#define USB_COUNT_SOF 1 |
||||
/* define this macro to 1 if you need the global variable "usbSofCount" which
|
||||
* counts SOF packets. This feature requires that the hardware interrupt is |
||||
* connected to D- instead of D+. |
||||
*/ |
||||
/* #ifdef __ASSEMBLER__
|
||||
* macro myAssemblerMacro |
||||
* in YL, TCNT0 |
||||
* sts timer0Snapshot, YL |
||||
* endm |
||||
* #endif |
||||
* #define USB_SOF_HOOK myAssemblerMacro |
||||
* This macro (if defined) is executed in the assembler module when a |
||||
* Start Of Frame condition is detected. It is recommended to define it to |
||||
* the name of an assembler macro which is defined here as well so that more |
||||
* than one assembler instruction can be used. The macro may use the register |
||||
* YL and modify SREG. If it lasts longer than a couple of cycles, USB messages |
||||
* immediately after an SOF pulse may be lost and must be retried by the host. |
||||
* What can you do with this hook? Since the SOF signal occurs exactly every |
||||
* 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in |
||||
* designs running on the internal RC oscillator. |
||||
* Please note that Start Of Frame detection works only if D- is wired to the |
||||
* interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES! |
||||
*/ |
||||
#define USB_CFG_CHECK_DATA_TOGGLING 0 |
||||
/* define this macro to 1 if you want to filter out duplicate data packets
|
||||
* sent by the host. Duplicates occur only as a consequence of communication |
||||
* errors, when the host does not receive an ACK. Please note that you need to |
||||
* implement the filtering yourself in usbFunctionWriteOut() and |
||||
* usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable |
||||
* for each control- and out-endpoint to check for duplicate packets. |
||||
*/ |
||||
#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH 0 |
||||
/* define this macro to 1 if you want the function usbMeasureFrameLength()
|
||||
* compiled in. This function can be used to calibrate the AVR's RC oscillator. |
||||
*/ |
||||
#define USB_USE_FAST_CRC 0 |
||||
/* The assembler module has two implementations for the CRC algorithm. One is
|
||||
* faster, the other is smaller. This CRC routine is only used for transmitted |
||||
* messages where timing is not critical. The faster routine needs 31 cycles |
||||
* per byte while the smaller one needs 61 to 69 cycles. The faster routine |
||||
* may be worth the 32 bytes bigger code size if you transmit lots of data and |
||||
* run the AVR close to its limit. |
||||
*/ |
||||
|
||||
/* -------------------------- Device Description --------------------------- */ |
||||
|
||||
#define USB_CFG_VENDOR_ID (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF) |
||||
/* USB vendor ID for the device, low byte first. If you have registered your
|
||||
* own Vendor ID, define it here. Otherwise you may use one of obdev's free |
||||
* shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules! |
||||
* *** IMPORTANT NOTE *** |
||||
* This template uses obdev's shared VID/PID pair for Vendor Class devices |
||||
* with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand |
||||
* the implications! |
||||
*/ |
||||
#define USB_CFG_DEVICE_ID (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF) |
||||
/* This is the ID of the product, low byte first. It is interpreted in the
|
||||
* scope of the vendor ID. If you have registered your own VID with usb.org |
||||
* or if you have licensed a PID from somebody else, define it here. Otherwise |
||||
* you may use one of obdev's free shared VID/PID pairs. See the file |
||||
* USB-IDs-for-free.txt for details! |
||||
* *** IMPORTANT NOTE *** |
||||
* This template uses obdev's shared VID/PID pair for Vendor Class devices |
||||
* with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand |
||||
* the implications! |
||||
*/ |
||||
#define USB_CFG_DEVICE_VERSION 0x00, 0x02 |
||||
/* Version number of the device: Minor number first, then major number.
|
||||
*/ |
||||
#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r' |
||||
#define USB_CFG_VENDOR_NAME_LEN 13 |
||||
/* These two values define the vendor name returned by the USB device. The name
|
||||
* must be given as a list of characters under single quotes. The characters |
||||
* are interpreted as Unicode (UTF-16) entities. |
||||
* If you don't want a vendor name string, undefine these macros. |
||||
* ALWAYS define a vendor name containing your Internet domain name if you use |
||||
* obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for |
||||
* details. |
||||
*/ |
||||
#define USB_CFG_DEVICE_NAME 'p', 's', '2', 'a', 'v', 'r', 'G', 'B' |
||||
#define USB_CFG_DEVICE_NAME_LEN 8 |
||||
/* Same as above for the device name. If you don't want a device name, undefine
|
||||
* the macros. See the file USB-IDs-for-free.txt before you assign a name if |
||||
* you use a shared VID/PID. |
||||
*/ |
||||
/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ |
||||
/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ |
||||
/* Same as above for the serial number. If you don't want a serial number,
|
||||
* undefine the macros. |
||||
* It may be useful to provide the serial number through other means than at |
||||
* compile time. See the section about descriptor properties below for how |
||||
* to fine tune control over USB descriptors such as the string descriptor |
||||
* for the serial number. |
||||
*/ |
||||
#define USB_CFG_DEVICE_CLASS 0 |
||||
#define USB_CFG_DEVICE_SUBCLASS 0 |
||||
/* See USB specification if you want to conform to an existing device class.
|
||||
* Class 0xff is "vendor specific". |
||||
*/ |
||||
#define USB_CFG_INTERFACE_CLASS 3 /* HID */ |
||||
#define USB_CFG_INTERFACE_SUBCLASS 1 /* Boot */ |
||||
#define USB_CFG_INTERFACE_PROTOCOL 1 /* Keyboard */ |
||||
/* See USB specification if you want to conform to an existing device class or
|
||||
* protocol. The following classes must be set at interface level: |
||||
* HID class is 3, no subclass and protocol required (but may be useful!) |
||||
* CDC class is 2, use subclass 2 and protocol 1 for ACM |
||||
*/ |
||||
#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH 0 |
||||
/* Define this to the length of the HID report descriptor, if you implement
|
||||
* an HID device. Otherwise don't define it or define it to 0. |
||||
* If you use this define, you must add a PROGMEM character array named |
||||
* "usbHidReportDescriptor" to your code which contains the report descriptor. |
||||
* Don't forget to keep the array and this define in sync! |
||||
*/ |
||||
|
||||
/* #define USB_PUBLIC static */ |
||||
/* Use the define above if you #include usbdrv.c instead of linking against it.
|
||||
* This technique saves a couple of bytes in flash memory. |
||||
*/ |
||||
|
||||
/* ------------------- Fine Control over USB Descriptors ------------------- */ |
||||
/* If you don't want to use the driver's default USB descriptors, you can
|
||||
* provide our own. These can be provided as (1) fixed length static data in |
||||
* flash memory, (2) fixed length static data in RAM or (3) dynamically at |
||||
* runtime in the function usbFunctionDescriptor(). See usbdrv.h for more |
||||
* information about this function. |
||||
* Descriptor handling is configured through the descriptor's properties. If |
||||
* no properties are defined or if they are 0, the default descriptor is used. |
||||
* Possible properties are: |
||||
* + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched |
||||
* at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is |
||||
* used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if |
||||
* you want RAM pointers. |
||||
* + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found |
||||
* in static memory is in RAM, not in flash memory. |
||||
* + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash), |
||||
* the driver must know the descriptor's length. The descriptor itself is |
||||
* found at the address of a well known identifier (see below). |
||||
* List of static descriptor names (must be declared PROGMEM if in flash): |
||||
* char usbDescriptorDevice[]; |
||||
* char usbDescriptorConfiguration[]; |
||||
* char usbDescriptorHidReport[]; |
||||
* char usbDescriptorString0[]; |
||||
* int usbDescriptorStringVendor[]; |
||||
* int usbDescriptorStringDevice[]; |
||||
* int usbDescriptorStringSerialNumber[]; |
||||
* Other descriptors can't be provided statically, they must be provided |
||||
* dynamically at runtime. |
||||
* |
||||
* Descriptor properties are or-ed or added together, e.g.: |
||||
* #define USB_CFG_DESCR_PROPS_DEVICE (USB_PROP_IS_RAM | USB_PROP_LENGTH(18)) |
||||
* |
||||
* The following descriptors are defined: |
||||
* USB_CFG_DESCR_PROPS_DEVICE |
||||
* USB_CFG_DESCR_PROPS_CONFIGURATION |
||||
* USB_CFG_DESCR_PROPS_STRINGS |
||||
* USB_CFG_DESCR_PROPS_STRING_0 |
||||
* USB_CFG_DESCR_PROPS_STRING_VENDOR |
||||
* USB_CFG_DESCR_PROPS_STRING_PRODUCT |
||||
* USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER |
||||
* USB_CFG_DESCR_PROPS_HID |
||||
* USB_CFG_DESCR_PROPS_HID_REPORT |
||||
* USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver) |
||||
* |
||||
* Note about string descriptors: String descriptors are not just strings, they |
||||
* are Unicode strings prefixed with a 2 byte header. Example: |
||||
* int serialNumberDescriptor[] = { |
||||
* USB_STRING_DESCRIPTOR_HEADER(6), |
||||
* 'S', 'e', 'r', 'i', 'a', 'l' |
||||
* }; |
||||
*/ |
||||
|
||||
#define USB_CFG_DESCR_PROPS_DEVICE 0 |
||||
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC |
||||
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
|
||||
#define USB_CFG_DESCR_PROPS_STRINGS 0 |
||||
#define USB_CFG_DESCR_PROPS_STRING_0 0 |
||||
#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 |
||||
#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 |
||||
#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 |
||||
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC |
||||
//#define USB_CFG_DESCR_PROPS_HID 0
|
||||
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC |
||||
//#define USB_CFG_DESCR_PROPS_HID_REPORT 0
|
||||
#define USB_CFG_DESCR_PROPS_UNKNOWN 0 |
||||
|
||||
#define usbMsgPtr_t unsigned short |
||||
/* If usbMsgPtr_t is not defined, it defaults to 'uchar *'. We define it to
|
||||
* a scalar type here because gcc generates slightly shorter code for scalar |
||||
* arithmetics than for pointer arithmetics. Remove this define for backward |
||||
* type compatibility or define it to an 8 bit type if you use data in RAM only |
||||
* and all RAM is below 256 bytes (tiny memory model in IAR CC). |
||||
*/ |
||||
|
||||
/* ----------------------- Optional MCU Description ------------------------ */ |
||||
|
||||
/* The following configurations have working defaults in usbdrv.h. You
|
||||
* usually don't need to set them explicitly. Only if you want to run |
||||
* the driver on a device which is not yet supported or with a compiler |
||||
* which is not fully supported (such as IAR C) or if you use a differnt |
||||
* interrupt than INT0, you may have to define some of these. |
||||
*/ |
||||
/* #define USB_INTR_CFG MCUCR */ |
||||
/* #define USB_INTR_CFG_SET ((1 << ISC00) | (1 << ISC01)) */ |
||||
/* #define USB_INTR_CFG_CLR 0 */ |
||||
/* #define USB_INTR_ENABLE GIMSK */ |
||||
/* #define USB_INTR_ENABLE_BIT INT0 */ |
||||
/* #define USB_INTR_PENDING GIFR */ |
||||
/* #define USB_INTR_PENDING_BIT INTF0 */ |
||||
/* #define USB_INTR_VECTOR INT0_vect */ |
||||
|
||||
/* Set INT1 for D- falling edge to count SOF */ |
||||
/* #define USB_INTR_CFG EICRA */ |
||||
#define USB_INTR_CFG_SET ((1 << ISC11) | (0 << ISC10)) |
||||
/* #define USB_INTR_CFG_CLR 0 */ |
||||
/* #define USB_INTR_ENABLE EIMSK */ |
||||
#define USB_INTR_ENABLE_BIT INT1 |
||||
/* #define USB_INTR_PENDING EIFR */ |
||||
#define USB_INTR_PENDING_BIT INTF1 |
||||
#define USB_INTR_VECTOR INT1_vect |
||||
Loading…
Reference in new issue