quantum separated

common/matrix.h

@@ -61,6 +61,10 @@ void matrix_print(void);
 void matrix_power_up(void);
 void matrix_power_down(void);
 
+void *matrix_init_kb(void);
+void *matrix_scan_kb(void);
+
+
 #ifdef __cplusplus
 }
 #endif

keyboard/planck/Makefile

@@ -39,7 +39,7 @@
 #----------------------------------------------------------------------------
 
 # Target file name (without extension).
-TARGET = planck_lufa
+TARGET = planck
 
 
 # Directory common source filess exist
@@ -49,9 +49,7 @@ TOP_DIR = ../..
 TARGET_DIR = .
 
 # # project specific files
-SRC = keymap_common.c \
+SRC = planck.c \
-	matrix.c \
-	led.c \
 	backlight.c 
 
 ifdef KEYMAP
@@ -128,14 +126,6 @@ MIDI_ENABLE = YES 		# MIDI controls
 # UNICODE_ENABLE = YES 		# Unicode
 BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
 
-ifdef MIDI_ENABLE
-	SRC += keymap_midi.c \
-		   beeps.c
-endif
-
-ifdef UNICODE_ENABLE
-	SRC += keymap_unicode.c
-endif
 
 # Optimize size but this may cause error "relocation truncated to fit"
 #EXTRALDFLAGS = -Wl,--relax
@@ -144,8 +134,5 @@ endif
 VPATH += $(TARGET_DIR)
 VPATH += $(TOP_DIR)
 
-include $(TOP_DIR)/protocol/lufa.mk
+include $(TOP_DIR)/quantum.mk
-
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
 

keyboard/planck/Makefile.pjrc

@@ -1,116 +0,0 @@
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device.
-#                Please customize your programmer settings(PROGRAM_CMD)
-#
-# make teensy = Download the hex file to the device, using teensy_loader_cli.
-#               (must have teensy_loader_cli installed).
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-#            have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-#             have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-#               (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-#                (must have Atmel FLIP installed).
-#
-# make debug = Start either simulavr or avarice as specified for debugging, 
-#              with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-#                   bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-# Target file name (without extension).
-TARGET = gh60_pjrc
-
-# Directory common source filess exist
-TOP_DIR = ../..
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# project specific files
-SRC =	keymap_common.c \
-	matrix.c \
-	led.c
-
-ifdef KEYMAP
-    SRC := keymap_$(KEYMAP).c $(SRC)
-else
-    SRC := keymap_jack.c $(SRC)
-endif
-
-CONFIG_H = config.h
-
-
-# MCU name, you MUST set this to match the board you are using
-# type "make clean" after changing this, so all files will be rebuilt
-MCU = atmega32u4
-#MCU = at90usb1286
-
-
-# Processor frequency.
-#   Normally the first thing your program should do is set the clock prescaler,
-#   so your program will run at the correct speed.  You should also set this
-#   variable to same clock speed.  The _delay_ms() macro uses this, and many
-#   examples use this variable to calculate timings.  Do not add a "UL" here.
-F_CPU = 16000000
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes	# Mouse keys(+5000)
-EXTRAKEY_ENABLE = yes	# Audio control and System control(+600)
-CONSOLE_ENABLE = yes    # Console for debug
-COMMAND_ENABLE = yes    # Commands for debug and configuration
-SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes	# USB Nkey Rollover(+500)
-#PS2_MOUSE_ENABLE = yes	# PS/2 mouse(TrackPoint) support
-
-
-# Search Path
-VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
-
-include $(TOP_DIR)/protocol/pjrc.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
-
-plain: OPT_DEFS += -DKEYMAP_PLAIN
-plain: all
-
-poker: OPT_DEFS += -DKEYMAP_POKER
-poker: all
-
-poker_set: OPT_DEFS += -DKEYMAP_POKER_SET
-poker_set: all
-
-poker_bit: OPT_DEFS += -DKEYMAP_POKER_BIT
-poker_bit: all

keyboard/planck/keymaps/keymap_default.c

@@ -1,6 +1,5 @@
-#include "keymap_common.h"
+#include "planck.h"
 #include "backlight.h"
-#include "debug.h"
 
 #define QWERTY_LAYER 0
 #define COLEMAK_LAYER 1

keyboard/planck/matrix_steno.c

@@ -1,234 +0,0 @@
-/*
-Copyright 2012 Jun Wako 
-Generated by planckkeyboard.com (2014 Jack Humbert)
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/*
- * scan matrix
- */
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/io.h>
-#include <util/delay.h>
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "matrix.h"
-
-#ifndef DEBOUNCE
-#   define DEBOUNCE 10
-#endif
-static uint8_t debouncing = DEBOUNCE;
-
-/* matrix state(1:on, 0:off) */
-static matrix_row_t matrix[MATRIX_ROWS];
-static matrix_row_t matrix_debouncing[MATRIX_ROWS];
-
-static matrix_row_t read_cols(void);
-static void init_cols(void);
-static void unselect_rows(void);
-static void select_row(uint8_t row);
-
-inline
-uint8_t matrix_rows(void)
-{
-    return MATRIX_ROWS;
-}
-
-inline
-uint8_t matrix_cols(void)
-{
-    return MATRIX_COLS;
-}
-
-void matrix_init(void)
-{
-    // To use PORTF disable JTAG with writing JTD bit twice within four cycles.
-    MCUCR |= (1<<JTD);
-    MCUCR |= (1<<JTD);
-
-    backlight_init_ports();
-
-    // Turn status LED on
-    DDRE |= (1<<6);
-    PORTE |= (1<<6);
-
-    // initialize row and col
-    unselect_rows();
-    init_cols();
-
-    // initialize matrix state: all keys off
-    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
-        matrix[i] = 0;
-        matrix_debouncing[i] = 0;
-    }
-}
-
-
-uint8_t matrix_scan(void)
-{
-    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-        select_row(i);
-        _delay_us(30);  // without this wait read unstable value.
-        matrix_row_t cols = read_cols();
-        if (matrix_debouncing[i] != cols) {
-            matrix_debouncing[i] = cols;
-            if (debouncing) {
-                debug("bounce!: "); debug_hex(debouncing); debug("\n");
-            }
-            debouncing = DEBOUNCE;
-        }
-        unselect_rows();
-    }
-
-    if (debouncing) {
-        if (--debouncing) {
-            _delay_ms(1);
-        } else {
-            for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-                matrix[i] = matrix_debouncing[i];
-            }
-        }
-    }
-
-    return 1;
-}
-
-bool matrix_is_modified(void)
-{
-    if (debouncing) return false;
-    return true;
-}
-
-inline
-bool matrix_is_on(uint8_t row, uint8_t col)
-{
-    return (matrix[row] & ((matrix_row_t)1<col));
-}
-
-inline
-matrix_row_t matrix_get_row(uint8_t row)
-{
-    return matrix[row];
-}
-
-void matrix_print(void)
-{
-    print("\nr/c 0123456789ABCDEF\n");
-    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
-        phex(row); print(": ");
-        pbin_reverse16(matrix_get_row(row));
-        print("\n");
-    }
-}
-
-uint8_t matrix_key_count(void)
-{
-    uint8_t count = 0;
-    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
-        count += bitpop16(matrix[i]);
-    }
-    return count;
-}
-
-static void init_cols(void)
-{
-    int B = 0, C = 0, D = 0, E = 0, F = 0;
-    for(int x = 0; x < MATRIX_COLS; x++) { 
-        int col = COLS[x];
-        if ((col & 0xF0) == 0x20) { 
-            B |= (1<<(col & 0x0F)); 
-        } else if ((col & 0xF0) == 0x30) { 
-            C |= (1<<(col & 0x0F)); 
-        } else if ((col & 0xF0) == 0x40) { 
-            D |= (1<<(col & 0x0F)); 
-        } else if ((col & 0xF0) == 0x50) { 
-            E |= (1<<(col & 0x0F)); 
-        } else if ((col & 0xF0) == 0x60) { 
-            F |= (1<<(col & 0x0F)); 
-        } 
-    }
-    DDRB &= ~(B); PORTB |= (B);
-    DDRC &= ~(C); PORTC |= (C); 
-    DDRD &= ~(D); PORTD |= (D);
-    DDRE &= ~(E); PORTE |= (E);
-    DDRF &= ~(F); PORTF |= (F);
-}
-
-static matrix_row_t read_cols(void)
-{
-    matrix_row_t result = 0;
-    for(int x = 0; x < MATRIX_COLS; x++) {     
-        int col = COLS[x];
-        if ((col & 0xF0) == 0x20) { 
-            result |= (PINB&(1<<(col & 0x0F)) ? 0 : (1<<x)); 
-        } else if ((col & 0xF0) == 0x30) { 
-            result |= (PINC&(1<<(col & 0x0F)) ? 0 : (1<<x)); 
-        } else if ((col & 0xF0) == 0x40) { 
-            result |= (PIND&(1<<(col & 0x0F)) ? 0 : (1<<x)); 
-        } else if ((col & 0xF0) == 0x50) { 
-            result |= (PINE&(1<<(col & 0x0F)) ? 0 : (1<<x)); 
-        } else if ((col & 0xF0) == 0x60) { 
-            result |= (PINF&(1<<(col & 0x0F)) ? 0 : (1<<x)); 
-        } 
-    }
-    return result;
-}
-
-static void unselect_rows(void)
-{
-    int B = 0, C = 0, D = 0, E = 0, F = 0;
-    for(int x = 0; x < MATRIX_ROWS; x++) { 
-        int row = ROWS[x];
-        if ((row & 0xF0) == 0x20) { 
-            B |= (1<<(row & 0x0F)); 
-        } else if ((row & 0xF0) == 0x30) { 
-            C |= (1<<(row & 0x0F)); 
-        } else if ((row & 0xF0) == 0x40) { 
-            D |= (1<<(row & 0x0F)); 
-        } else if ((row & 0xF0) == 0x50) { 
-            E |= (1<<(row & 0x0F)); 
-        } else if ((row & 0xF0) == 0x60) { 
-            F |= (1<<(row & 0x0F)); 
-        } 
-    }
-    DDRB &= ~(B); PORTB |= (B);
-    DDRC &= ~(C); PORTC |= (C); 
-    DDRD &= ~(D); PORTD |= (D);
-    DDRE &= ~(E); PORTE |= (E);
-    DDRF &= ~(F); PORTF |= (F);
-}
-
-static void select_row(uint8_t row)
-{
-    int row_pin = ROWS[row];
-    if ((row_pin & 0xF0) == 0x20) { 
-        DDRB  |= (1<<(row_pin & 0x0F));
-        PORTB &= ~(1<<(row_pin & 0x0F));
-    } else if ((row_pin & 0xF0) == 0x30) { 
-        DDRC  |= (1<<(row_pin & 0x0F));
-        PORTC &= ~(1<<(row_pin & 0x0F));
-    } else if ((row_pin & 0xF0) == 0x40) { 
-        DDRD  |= (1<<(row_pin & 0x0F));
-        PORTD &= ~(1<<(row_pin & 0x0F));
-    } else if ((row_pin & 0xF0) == 0x50) { 
-        DDRE  |= (1<<(row_pin & 0x0F));
-        PORTE &= ~(1<<(row_pin & 0x0F));
-    } else if ((row_pin & 0xF0) == 0x60) { 
-        DDRF  |= (1<<(row_pin & 0x0F));
-        PORTF &= ~(1<<(row_pin & 0x0F));
-    }  
-}

keyboard/planck/planck.c

@@ -0,0 +1,29 @@
+#include "planck.h"
+
+void * matrix_init_user(void) {
+
+};
+
+void * matrix_scan_user(void) {
+
+};
+
+void *matrix_init_kb(void) {
+	#ifdef BACKLIGHT_ENABLE
+    	backlight_init_ports();
+	#endif
+
+    // Turn status LED on
+    DDRE |= (1<<6);
+    PORTE |= (1<<6);
+
+	if (matrix_init_user) {
+		(*matrix_init_user)();
+	}
+};
+
+void *matrix_scan_kb(void) {
+	if (matrix_scan_user) {
+		(*matrix_scan_user)();
+	}
+};

keyboard/planck/planck.h

@@ -0,0 +1,38 @@
+#ifndef PLANCK_H
+#define PLANCK_H
+
+#include "matrix.h"
+#include "keymap_common.h"
+#include "backlight.h"
+#include <stddef.h>
+
+#define PLANCK_MIT( \
+	k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
+	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \
+	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
+	k30, k31, k32, k33, k34,    k35,   k37, k38, k39, k3a, k3b \
+) \
+{ \
+	{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \
+	{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \
+	{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \
+	{ k30, k31, k32, k33, k34, k35, k35, k37, k38, k39, k3a, k3b } \
+} 
+
+#define PLANCK_GRID( \
+	k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \
+	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \
+	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \
+	k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b \
+) \
+{ \
+	{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \
+	{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \
+	{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \
+	{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b } \
+} 
+
+void * matrix_init_user(void);
+void * matrix_scan_user(void);
+
+#endif

protocol/lufa/lufa.c

@@ -908,13 +908,16 @@ int main(void)
 
     print("Keyboard start.\n");
     while (1) {
-        // while (USB_DeviceState == DEVICE_STATE_Suspended) {
+
-        //     print("[s]");
+#ifndef BLUETOOTH_ENABLE
-        //     suspend_power_down();
+        while (USB_DeviceState == DEVICE_STATE_Suspended) {
-        //     if (USB_Device_RemoteWakeupEnabled && suspend_wakeup_condition()) {
+            print("[s]");
-        //             USB_Device_SendRemoteWakeup();
+            suspend_power_down();
-        //     }
+            if (USB_Device_RemoteWakeupEnabled && suspend_wakeup_condition()) {
-        // }
+                    USB_Device_SendRemoteWakeup();
+            }
+        }
+#endif
 
 #ifdef MIDI_ENABLE
         midi_device_process(&midi_device);

quantum.mk

@@ -0,0 +1,69 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+#                Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+#            have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+#             have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+#               (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+#                (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging, 
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+QUANTUM_DIR = $(TOP_DIR)/quantum
+
+# # project specific files
+SRC += $(QUANTUM_DIR)/keymap_common.c \
+	$(QUANTUM_DIR)/matrix.c \
+	$(QUANTUM_DIR)/led.c 
+
+ifdef MIDI_ENABLE
+	SRC += $(QUANTUM_DIR)/keymap_midi.c \
+		   $(QUANTUM_DIR)/beeps.c
+endif
+
+ifdef UNICODE_ENABLE
+	SRC += $(QUANTUM_DIR)/keymap_unicode.c
+endif
+
+# Optimize size but this may cause error "relocation truncated to fit"
+#EXTRALDFLAGS = -Wl,--relax
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+VPATH += $(QUANTUM_DIR)
+
+include $(TOP_DIR)/protocol/lufa.mk
+
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
+

quantum/keymap_common.c

@@ -73,6 +73,12 @@ action_t action_for_key(uint8_t layer, keypos_t key)
         print("\nDEBUG: enabled.\n");
         debug_enable = true;
         return;
+    } else if (keycode >= 0x5000 && keycode < 0x6000) {
+        int when = (keycode >> 0x9) & 0x3;
+        int layer = keycode & 0xFF;
+        action_t action;
+        action.code = ACTION_LAYER_SET(layer, when);
+        return action;
     } else if (keycode >= 0x6000 && keycode < 0x7000) {
         action_t action;
         action.code =  ACTION_FUNCTION_OPT(keycode & 0xFF, (keycode & 0x0F00) >> 8);

quantum/keymap_common.h

@@ -108,8 +108,14 @@ extern const uint16_t fn_actions[];
 #define RESET 0x5000
 #define DEBUG 0x5001
 
+// ON_PRESS    = 1
+// ON_RELEASE  = 2
+// ON_BOTH     = 3
+#define TO(layer, when) (layer | 0x5100 | (when << 0x9))
+
 #define MIDI(n) (n | 0x6000)
 
 #define UNI(n) (n | 0x8000)
 
+
 #endif

quantum/keymap_extras/keymap_colemak.h

@@ -0,0 +1,74 @@
+#ifndef KEYMAP_COLEMAK_H
+#define KEYMAP_COLEMAK_H
+
+#include "keymap_common.h"
+// For software implementation of colemak
+#define CM_Q    KC_Q
+#define CM_W    KC_W
+#define CM_F    KC_E
+#define CM_P    KC_R
+#define CM_G    KC_T
+#define CM_J    KC_Y
+#define CM_L    KC_U
+#define CM_U    KC_I
+#define CM_Y    KC_O
+#define CM_SCLN KC_P
+
+#define CM_A    KC_A
+#define CM_R    KC_S
+#define CM_S    KC_D
+#define CM_T    KC_F
+#define CM_D    KC_G
+#define CM_H    KC_H
+#define CM_N    KC_J
+#define CM_E    KC_K
+#define CM_I    KC_L
+#define CM_O    KC_SCLN
+
+#define CM_Z    KC_Z
+#define CM_X    KC_X
+#define CM_C    KC_C
+#define CM_V    KC_V
+#define CM_B    KC_B
+#define CM_K    KC_N
+#define CM_M    KC_M
+#define CM_COMM KC_COMM
+#define CM_DOT  KC_DOT
+#define CM_SLSH KC_SLSH
+
+// Make it easy to support these in macros
+// TODO: change macro implementation so these aren't needed
+#define KC_CM_Q    CM_Q    
+#define KC_CM_W    CM_W    
+#define KC_CM_F    CM_F    
+#define KC_CM_P    CM_P    
+#define KC_CM_G    CM_G    
+#define KC_CM_J    CM_J    
+#define KC_CM_L    CM_L    
+#define KC_CM_U    CM_U    
+#define KC_CM_Y    CM_Y    
+#define KC_CM_SCLN CM_SCLN 
+
+#define KC_CM_A    CM_A    
+#define KC_CM_R    CM_R    
+#define KC_CM_S    CM_S    
+#define KC_CM_T    CM_T    
+#define KC_CM_D    CM_D    
+#define KC_CM_H    CM_H    
+#define KC_CM_N    CM_N    
+#define KC_CM_E    CM_E    
+#define KC_CM_I    CM_I    
+#define KC_CM_O    CM_O    
+
+#define KC_CM_Z    CM_Z    
+#define KC_CM_X    CM_X    
+#define KC_CM_C    CM_C    
+#define KC_CM_V    CM_V    
+#define KC_CM_B    CM_B    
+#define KC_CM_K    CM_K    
+#define KC_CM_M    CM_M    
+#define KC_CM_COMM CM_COMM 
+#define KC_CM_DOT  CM_DOT  
+#define KC_CM_SLSH CM_SLSH 
+
+#endif

quantum/keymap_extras/keymap_dvorak.h

@@ -0,0 +1,72 @@
+#ifndef KEYMAP_DVORAK_H
+#define KEYMAP_DVORAK_H
+
+#include "keymap_common.h"
+
+// Normal characters
+#define DV_GRV	KC_GRV
+#define DV_1	KC_1
+#define DV_2	KC_2
+#define DV_3	KC_3
+#define DV_4	KC_4
+#define DV_5	KC_5
+#define DV_6	KC_6
+#define DV_7	KC_7
+#define DV_8	KC_8
+#define DV_9	KC_9
+#define DV_0	KC_0
+#define DV_LBRC	KC_MINS
+#define DV_RBRC	KC_EQL
+
+#define DV_QUOT KC_Q
+#define DV_COMM	KC_W
+#define DV_DOT	KC_E
+#define DV_P	KC_R
+#define DV_Y	KC_T
+#define	DV_F	KC_Y
+#define DV_G	KC_U
+#define DV_C 	KC_I
+#define	DV_R	KC_O
+#define DV_L	KC_P
+#define DV_SLSH	KC_LBRC
+#define DV_EQL	KC_RBRC
+
+#define DV_A	KC_A
+#define DV_O	KC_S
+#define DV_E	KC_D
+#define DV_U	KC_F
+#define DV_I	KC_G
+#define DV_D	KC_H
+#define DV_H	KC_J
+#define DV_T	KC_K
+#define DV_N	KC_L
+#define DV_S	KC_SCLN
+#define DV_MINS	KC_QUOT
+
+#define DV_SCLN	KC_Z
+#define DV_Q	KC_X
+#define DV_J	KC_C
+#define DV_K	KC_V
+#define DV_X	KC_B
+#define DV_B	KC_N
+#define DV_M	KC_M
+#define DV_W	KC_COMM
+#define DV_V	KC_DOT
+#define DV_Z	KC_SLSH
+
+// Shifted characters
+#define DV_TILD	LSFT(DV_GRV)
+#define DV_EXLM	LSFT(DV_1)
+#define DV_AT	LSFT(DV_2)
+#define DV_HASH	LSFT(DV_3)
+#define DV_DLR	LSFT(DV_4)
+#define DV_PERC	LSFT(DV_5)
+#define DV_CIRC	LSFT(DV_6)
+#define DV_AMPR	LSFT(DV_7)
+#define DV_ASTR	LSFT(DV_8)
+#define DV_LPRN	LSFT(DV_9)
+#define DV_RPRN	LSFT(DV_0)
+#define DV_LCBR	LSFT(DV_LBRC)
+#define DV_RCBR	LSFT(DV_RBRC)
+
+#endif

quantum/keymap_extras/keymap_uk.h

@@ -0,0 +1,36 @@
+#ifndef KEYMAP_UK_H
+#define KEYMAP_UK_H
+
+#include "keymap_common.h"
+
+// Alt gr
+#define ALGR(kc) kc | 0x1400
+#define NO_ALGR KC_RALT
+
+// Normal characters
+#define UK_HASH KC_NUHS
+
+#define UK_BSLS	KC_NUBS
+
+// Shifted characters
+#define UK_NOT	LSFT(KC_GRV)
+#define UK_QUOT	LSFT(KC_2)
+#define UK_PND	LSFT(KC_3)
+
+#define UK_AT	LSFT(KC_QUOT)
+#define UK_TILD	LSFT(KC_NUHS)
+
+#define UK_PIPE	LSFT(KC_NUBS)
+
+// Alt Gr-ed characters
+#define UK_BRKP	ALGR(KC_GRV)
+#define UK_EURO	ALGR(KC_4)
+
+#define UK_EACT	ALGR(KC_E)
+#define UK_UACT	ALGR(KC_U)
+#define UK_IACT ALGR(KC_I)
+#define UK_OACT ALGR(KC_O)
+
+#define UK_AACT ALGR(KC_A)
+
+#endif

quantum/matrix.c

@@ -38,8 +38,8 @@ static matrix_row_t matrix[MATRIX_ROWS];
 static matrix_row_t matrix_debouncing[MATRIX_ROWS];
 
 #if DIODE_DIRECTION == ROW2COL
-static matrix_row_t matrix_reversed[MATRIX_COLS];
+    static matrix_row_t matrix_reversed[MATRIX_COLS];
-static matrix_row_t matrix_reversed_debouncing[MATRIX_COLS];
+    static matrix_row_t matrix_reversed_debouncing[MATRIX_COLS];
 #endif
 
 static matrix_row_t read_cols(void);
@@ -65,13 +65,6 @@ void matrix_init(void)
     MCUCR |= (1<<JTD);
     MCUCR |= (1<<JTD);
 
-#ifdef BACKLIGHT_ENABLE
-    backlight_init_ports();
-#endif
-
-    // Turn status LED on
-    DDRE |= (1<<6);
-    PORTE |= (1<<6);
 
     // initialize row and col
     unselect_rows();
@@ -82,11 +75,16 @@ void matrix_init(void)
         matrix[i] = 0;
         matrix_debouncing[i] = 0;
     }
+
+    if (matrix_init_kb) {
+        (*matrix_init_kb)();
+    }
 }
 
 
 uint8_t matrix_scan(void)
 {
+
 #if DIODE_DIRECTION == COL2ROW
     for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
         select_row(i);
@@ -144,6 +142,10 @@ uint8_t matrix_scan(void)
     }
 #endif
 
+    if (matrix_scan_kb) {
+        (*matrix_scan_kb)();
+    }
+
     return 1;
 }