[Keyboard] add geekboards 8key macro-pad tester (#5940)
* add geekboards 8key macro-pad tester * Update readme.md * Update keyboards/geekboards/tester/rules.mk Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/geekboards/tester/keymaps/default/keymap.c Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/geekboards/tester/keymaps/default/keymap.c Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/geekboards/tester/keymaps/default/keymap.c Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/geekboards/tester/keymaps/default/keymap.c Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keymap.c * Update keyboards/geekboards/tester/readme.md Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/geekboards/tester/readme.md Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/geekboards/tester/readme.md Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/geekboards/tester/readme.md Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/geekboards/tester/readme.md Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update readme.md * Update tester.c * Update keyboards/geekboards/tester/config.h Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update keyboards/geekboards/tester/rules.mk Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update keyboards/geekboards/tester/keymaps/default/keymap.c Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update keyboards/geekboards/tester/keymaps/default/keymap.c Co-Authored-By: Drashna Jaelre <drashna@live.com>planck_thk^2
moyi4681
6 years ago
committed by
Drashna Jaelre
parent
ff6a57c3c3
commit
4d46489a2a
@ -0,0 +1,39 @@ |
||||
#pragma once |
||||
|
||||
#include "config_common.h" |
||||
|
||||
|
||||
#define VENDOR_ID 0xFEED |
||||
#define PRODUCT_ID 0x1319 |
||||
#define DEVICE_VER 0x0001 |
||||
#define MANUFACTURER Geekboards |
||||
#define PRODUCT Geekboards Tester |
||||
#define DESCRIPTION Geekboards 8-keys macropad |
||||
|
||||
|
||||
#define MATRIX_ROWS 2 |
||||
#define MATRIX_COLS 4 |
||||
|
||||
#define MATRIX_ROW_PINS { B0, D4} |
||||
#define MATRIX_COL_PINS { F7, F6, D2, D3} |
||||
#define UNUSED_PINS |
||||
|
||||
#define DIODE_DIRECTION COL2ROW |
||||
#define LOCKING_SUPPORT_ENABL |
||||
#define LOCKING_RESYNC_ENABLE |
||||
|
||||
#define DEBOUNCE 3 |
||||
#define RGB_DISABLE_AFTER_TIMEOUT 0 |
||||
#define RGB_DISABLE_WHEN_USB_SUSPENDED true |
||||
#define RGB_MATRIX_KEYPRESSES |
||||
#define DISABLE_RGB_MATRIX_SPLASH |
||||
#define DISABLE_RGB_MATRIX_MULTISPLASH |
||||
#define DISABLE_RGB_MATRIX_SOLID_SPLASH |
||||
#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH |
||||
#define DRIVER_ADDR_1 0b1110100 |
||||
#define DRIVER_ADDR_2 0b1110101 |
||||
|
||||
#define DRIVER_COUNT 2 |
||||
#define DRIVER_1_LED_TOTAL 8 |
||||
#define DRIVER_2_LED_TOTAL 0 |
||||
#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) |
||||
@ -0,0 +1,23 @@ |
||||
#include QMK_KEYBOARD_H |
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { |
||||
[0] = LAYOUT( /* Base */ |
||||
RGB_MOD, KC_1, KC_2, KC_3, |
||||
KC_4, KC_5, KC_6, MO(1) |
||||
), |
||||
[1] = LAYOUT( /* Base */ |
||||
KC_ESC, KC_F1, KC_F2, KC_F3, |
||||
KC_F4, KC_F5, KC_F6, KC_F7 |
||||
), |
||||
}; |
||||
|
||||
void matrix_init_user(void) { |
||||
//user initialization
|
||||
} |
||||
|
||||
void matrix_scan_user(void) { |
||||
//user matrix
|
||||
} |
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { |
||||
return true; |
||||
} |
||||
@ -0,0 +1,12 @@ |
||||
Geekboards 8-keys macropad |
||||
===== |
||||
|
||||
Keyboard Maintainer: [dztech](https://github.com/moyi4681) |
||||
Hardware Supported: Geekboards 8-keys macropad |
||||
Hardware Availability: geekboards.ru(https://geekboards.ru/) |
||||
|
||||
Make example for this keyboard (after setting up your build environment): |
||||
|
||||
make geekboards/tester:default |
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
||||
@ -0,0 +1,68 @@ |
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# project specific files
|
||||
#SRC =
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
# Boot Section
|
||||
BOOTLOADER = qmk-dfu
|
||||
|
||||
# Do not put the microcontroller into power saving mode
|
||||
# when we get USB suspend event. We want it to keep updating
|
||||
# backlight effects.
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||
RGB_MATRIX_ENABLE = yes # Use RGB matrix
|
||||
@ -0,0 +1,56 @@ |
||||
#include "tester.h" |
||||
const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { |
||||
/* Refer to IS31 manual for these locations
|
||||
* driver |
||||
* | R location |
||||
* | | G location |
||||
* | | | B location |
||||
* | | | | */ |
||||
{0, C1_1, C3_2, C4_2}, //A1
|
||||
{0, C1_2, C2_2, C4_3}, //A2
|
||||
{0, C1_3, C2_3, C3_3}, //A3
|
||||
{0, C1_4, C2_4, C3_4}, //A4
|
||||
{0, C1_5, C2_5, C3_5}, //A5
|
||||
{0, C1_6, C2_6, C3_6}, //A6
|
||||
{0, C1_7, C2_7, C3_7}, //A7
|
||||
{0, C1_8, C2_8, C3_8}, //A8
|
||||
}; |
||||
|
||||
led_config_t g_led_config = {
|
||||
{ |
||||
{ 0, 1, 2, 3}, |
||||
{ 4, 5, 6, 7} |
||||
},
|
||||
{ |
||||
{ 0, 0 }, { 75, 0 }, { 151, 0 }, { 224, 0 }, { 0, 64 }, { 75, 64 }, { 151, 64 }, { 224, 64 } |
||||
},
|
||||
{ |
||||
4, 4, 4, 4, 4, 4, 4, 4 |
||||
}
|
||||
}; |
||||
|
||||
|
||||
|
||||
void matrix_init_kb(void) { |
||||
matrix_init_user(); |
||||
} |
||||
|
||||
void matrix_scan_kb(void) { |
||||
matrix_scan_user(); |
||||
} |
||||
|
||||
bool process_record_kb(uint16_t keycode, keyrecord_t *record) { |
||||
return process_record_user(keycode, record); |
||||
} |
||||
|
||||
void suspend_power_down_kb(void) |
||||
{ |
||||
rgb_matrix_set_suspend_state(true); |
||||
suspend_power_down_user(); |
||||
} |
||||
|
||||
void suspend_wakeup_init_kb(void) |
||||
{ |
||||
rgb_matrix_set_suspend_state(false); |
||||
suspend_wakeup_init_user(); |
||||
} |
||||
@ -0,0 +1,10 @@ |
||||
#pragma once |
||||
#include "quantum.h" |
||||
#define LAYOUT( \ |
||||
k00, k01, k02, k03,\
|
||||
k10, k11, k12, k13\
|
||||
) \
|
||||
{ \
|
||||
{ k00, k01, k02, k03 }, \
|
||||
{ k10, k11, k12, k13 } \
|
||||
} |
||||
Loading…
Reference in new issue