[Keyboard] Ymd09 config updates (#20124)

Co-authored-by: jack <0x6a73@protonmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>

keyboards/ymdk/ymd09/config.h

@@ -1,5 +1,6 @@
 /*
 Copyright 2020 Patrick Fruh
+Copyright 2023 SHVD3x
 
 This program is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
@@ -17,33 +18,59 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
+#define RGB_MATRIX_LED_COUNT 9
+#define RGB_DI_PIN E2
 
-/* Keyboard Matrix Assignments */
+#define RGB_DISABLE_WHEN_USB_SUSPENDED
-#define MATRIX_ROW_PINS { F5, F4, F1 }
-#define MATRIX_COL_PINS { D6, D2, D1 }
-
-/* COL2ROW, ROW2COL*/
-#define DIODE_DIRECTION ROW2COL
 
-#define RGB_DI_PIN E2
+// RGB Matrix Animation modes. Explicitly enabled
-#ifdef RGB_DI_PIN
+// For full list of effects, see:
- #define RGBLED_NUM 9
+// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects
- #define RGBLIGHT_HUE_STEP 8
+//#define ENABLE_RGB_MATRIX_ALPHAS_MODS
- #define RGBLIGHT_SAT_STEP 8
+//#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
- #define RGBLIGHT_VAL_STEP 8
+//#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
- #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+#define ENABLE_RGB_MATRIX_BREATHING
- #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+//#define ENABLE_RGB_MATRIX_BAND_SAT
-#define RGBLIGHT_EFFECT_BREATHING
+//#define ENABLE_RGB_MATRIX_BAND_VAL
-#define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
-#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
-#define RGBLIGHT_EFFECT_SNAKE
+//#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
-#define RGBLIGHT_EFFECT_KNIGHT
+//#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
-#define RGBLIGHT_EFFECT_CHRISTMAS
+#define ENABLE_RGB_MATRIX_CYCLE_ALL
-#define RGBLIGHT_EFFECT_STATIC_GRADIENT
+#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
-#define RGBLIGHT_EFFECT_RGB_TEST
+#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
-#define RGBLIGHT_EFFECT_ALTERNATING
+#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
-#define RGBLIGHT_EFFECT_TWINKLE
+#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
-#endif
+//#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
+#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
+#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL
+#define ENABLE_RGB_MATRIX_DUAL_BEACON
+#define ENABLE_RGB_MATRIX_RAINBOW_BEACON
+//#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
+#define ENABLE_RGB_MATRIX_RAINDROPS
+#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
+#define ENABLE_RGB_MATRIX_HUE_BREATHING
+#define ENABLE_RGB_MATRIX_HUE_PENDULUM
+#define ENABLE_RGB_MATRIX_HUE_WAVE
+#define ENABLE_RGB_MATRIX_PIXEL_RAIN
+#define ENABLE_RGB_MATRIX_PIXEL_FLOW
+#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL
+// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined
+#define ENABLE_RGB_MATRIX_TYPING_HEATMAP
+#define ENABLE_RGB_MATRIX_DIGITAL_RAIN
+// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
+#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
+#define ENABLE_RGB_MATRIX_SPLASH
+#define ENABLE_RGB_MATRIX_MULTISPLASH
+#define ENABLE_RGB_MATRIX_SOLID_SPLASH
+#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/ymdk/ymd09/info.json

@@ -10,19 +10,51 @@
     },
     "processor": "atmega32u4",
     "bootloader": "atmel-dfu",
+    "features": {
+        "bootmagic": true,
+        "mousekey": true,
+        "extrakey": true,
+        "console": false,
+        "command": false,
+        "nkro": true,
+        "rgb_matrix": true,
+    },
+    "build": {
+        "lto": true
+    },
+    "diode_direction": "ROW2COL",
+    "matrix_pins": {
+        "cols": ["D6", "D2", "D1"],
+        "rows": ["F5", "F4", "F1"]
+    },
     "layouts": {
         "LAYOUT": {
             "layout": [
-                {"label": "7", "x": 0, "y": 0},
+                {"label": "7", "matrix": [0, 0], "x": 0, "y": 0},
-                {"label": "8", "x": 1, "y": 0},
+                {"label": "8", "matrix": [0, 1], "x": 1, "y": 0},
-                {"label": "9", "x": 2, "y": 0},
+                {"label": "9", "matrix": [0, 2], "x": 2, "y": 0},
-                {"label": "4", "x": 0, "y": 1},
+                {"label": "4", "matrix": [1, 0], "x": 0, "y": 1},
-                {"label": "5", "x": 1, "y": 1},
+                {"label": "5", "matrix": [1, 1], "x": 1, "y": 1},
-                {"label": "6", "x": 2, "y": 1},
+                {"label": "6", "matrix": [1, 2], "x": 2, "y": 1},
-                {"label": "1", "x": 0, "y": 2},
+                {"label": "1", "matrix": [2, 0], "x": 0, "y": 2},
-                {"label": "2", "x": 1, "y": 2},
+                {"label": "2", "matrix": [2, 1], "x": 1, "y": 2},
-                {"label": "3", "x": 2, "y": 2}
+                {"label": "3", "matrix": [2, 2], "x": 2, "y": 2}
             ]
         }
+    },
+    "rgb_matrix": {
+        "driver": "WS2812",
+        "layout": [
+            { "flags": 4, "matrix": [0, 2], "x": 64, "y": 0 },  //7
+            { "flags": 4, "matrix": [0, 1], "x": 32, "y": 0 },  //8
+            { "flags": 4, "matrix": [0, 0], "x":  0, "y": 0 },  //9
+            { "flags": 4, "matrix": [1, 2], "x": 64, "y": 32 }, //4
+            { "flags": 4, "matrix": [1, 1], "x": 32, "y": 32 }, //5
+            { "flags": 4, "matrix": [1, 0], "x":  0, "y": 32 }, //6
+            { "flags": 4, "matrix": [2, 2], "x": 64, "y": 64 }, //1
+            { "flags": 4, "matrix": [2, 1], "x": 32, "y": 64 }, //2
+            { "flags": 4, "matrix": [2, 0], "x":  0, "y": 64 }  //3
+        ],
+        "center_point": [ 32, 32 ],
     }
 }

keyboards/ymdk/ymd09/keymaps/default/keymap.c

@@ -1,3 +1,18 @@
+/*
+Copyright 2023
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+
 #include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {

keyboards/ymdk/ymd09/keymaps/via/keymap.c

@@ -1,3 +1,18 @@
+/*
+Copyright 2023
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+
 #include QMK_KEYBOARD_H
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {

keyboards/ymdk/ymd09/readme.md

@@ -12,4 +12,16 @@ Make example for this keyboard (after setting up your build environment):
 
     make ymdk/ymd09:default
 
+Flashing example for this keyboard:
+
+    make ymdk/ymd09:default:flash
+
 See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

keyboards/ymdk/ymd09/rules.mk

@@ -1,13 +1 @@
-# Build Options
+# This file intentionally left blank
-#   change yes to no to disable
-#
-BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
-MOUSEKEY_ENABLE = yes       # Mouse keys
-EXTRAKEY_ENABLE = yes       # Audio control and System control
-CONSOLE_ENABLE = no         # Console for debug
-COMMAND_ENABLE = no         # Commands for debug and configuration
-NKRO_ENABLE = no            # Enable N-Key Rollover
-BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
-RGBLIGHT_ENABLE = yes       # Enable keyboard RGB underglow
-AUDIO_ENABLE = no           # Audio output
-LTO_ENABLE = yes            # reduce firmware size

keyboards/ymdk/ymd09/ymd09.c

@@ -1 +0,0 @@
-#include "ymd09.h"

keyboards/ymdk/ymd09/ymd09.h

@@ -1,13 +0,0 @@
-#pragma once
-
-#include "quantum.h"
-
-#define LAYOUT( \
-	K00, K01, K02, \
-	K10, K11, K12, \
-	K20, K21, K22  \
-) { \
-	{ K00,   K01,   K02 }, \
-	{ K10,   K11,   K12 }, \
-	{ K20,   K21,   K22 }  \
-}