Joshua Colbeck
9 years ago
committed by
GitHub
commit
68ceffe53e
@ -1 +1,17 @@ |
|||||||
#include "rev1.h" |
#include "rev1.h" |
||||||
|
|
||||||
|
void led_init_ports() { |
||||||
|
// * Set our LED pins as output
|
||||||
|
DDRF |= (1<<0); |
||||||
|
} |
||||||
|
|
||||||
|
void led_set_kb(uint8_t usb_led) { |
||||||
|
DDRF |= (1<<0); |
||||||
|
if (usb_led & (1<<USB_LED_CAPS_LOCK)) { |
||||||
|
// Turn capslock on
|
||||||
|
PORTF |= (1<<0); |
||||||
|
} else { |
||||||
|
// Turn capslock off
|
||||||
|
PORTF &= ~(1<<0); |
||||||
|
} |
||||||
|
} |
||||||
|
|||||||
@ -0,0 +1,112 @@ |
|||||||
|
#----------------------------------------------------------------------------
|
||||||
|
# On command line:
|
||||||
|
#
|
||||||
|
# make all = Make software.
|
||||||
|
#
|
||||||
|
# make clean = Clean out built project files.
|
||||||
|
#
|
||||||
|
# make coff = Convert ELF to AVR COFF.
|
||||||
|
#
|
||||||
|
# make extcoff = Convert ELF to AVR Extended COFF.
|
||||||
|
#
|
||||||
|
# make program = Download the hex file to the device.
|
||||||
|
# Please customize your programmer settings(PROGRAM_CMD)
|
||||||
|
#
|
||||||
|
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
||||||
|
# (must have teensy_loader_cli installed).
|
||||||
|
#
|
||||||
|
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
||||||
|
# have dfu-programmer installed).
|
||||||
|
#
|
||||||
|
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
||||||
|
# have Atmel FLIP installed).
|
||||||
|
#
|
||||||
|
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
||||||
|
# (must have dfu-programmer installed).
|
||||||
|
#
|
||||||
|
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
||||||
|
# (must have Atmel FLIP installed).
|
||||||
|
#
|
||||||
|
# make debug = Start either simulavr or avarice as specified for debugging,
|
||||||
|
# with avr-gdb or avr-insight as the front end for debugging.
|
||||||
|
#
|
||||||
|
# make filename.s = Just compile filename.c into the assembler code only.
|
||||||
|
#
|
||||||
|
# make filename.i = Create a preprocessed source file for use in submitting
|
||||||
|
# bug reports to the GCC project.
|
||||||
|
#
|
||||||
|
# To rebuild project do "make clean" then "make all".
|
||||||
|
#----------------------------------------------------------------------------
|
||||||
|
|
||||||
|
# MCU name
|
||||||
|
#MCU = at90usb1287
|
||||||
|
MCU = atmega32u4
|
||||||
|
|
||||||
|
# Processor frequency.
|
||||||
|
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||||
|
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||||
|
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||||
|
# automatically to create a 32-bit value in your source code.
|
||||||
|
#
|
||||||
|
# This will be an integer division of F_USB below, as it is sourced by
|
||||||
|
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||||
|
# does not *change* the processor frequency - it should merely be updated to
|
||||||
|
# reflect the processor speed set externally so that the code can use accurate
|
||||||
|
# software delays.
|
||||||
|
F_CPU = 16000000
|
||||||
|
|
||||||
|
|
||||||
|
#
|
||||||
|
# LUFA specific
|
||||||
|
#
|
||||||
|
# Target architecture (see library "Board Types" documentation).
|
||||||
|
ARCH = AVR8
|
||||||
|
|
||||||
|
# Input clock frequency.
|
||||||
|
# This will define a symbol, F_USB, in all source code files equal to the
|
||||||
|
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||||
|
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||||
|
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||||
|
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||||
|
# at the end, this will be done automatically to create a 32-bit value in your
|
||||||
|
# source code.
|
||||||
|
#
|
||||||
|
# If no clock division is performed on the input clock inside the AVR (via the
|
||||||
|
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||||
|
F_USB = $(F_CPU)
|
||||||
|
|
||||||
|
# Interrupt driven control endpoint task(+60)
|
||||||
|
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||||
|
|
||||||
|
|
||||||
|
# Boot Section Size in *bytes*
|
||||||
|
# Teensy halfKay 512
|
||||||
|
# Teensy++ halfKay 1024
|
||||||
|
# Atmel DFU loader 4096
|
||||||
|
# LUFA bootloader 4096
|
||||||
|
# USBaspLoader 2048
|
||||||
|
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||||
|
|
||||||
|
|
||||||
|
# Build Options
|
||||||
|
# comment out to disable the options.
|
||||||
|
#
|
||||||
|
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||||
|
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||||
|
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||||
|
# CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||||
|
# COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||||
|
KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key
|
||||||
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
|
# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
|
||||||
|
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
|
||||||
|
# MIDI_ENABLE ?= YES # MIDI controls
|
||||||
|
# UNICODE_ENABLE ?= YES # Unicode
|
||||||
|
# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
|
RGBLIGHT_ENABLE ?= yes # Enable RGB Underglow
|
||||||
|
|
||||||
|
ifndef QUANTUM_DIR |
||||||
|
include ../../../../Makefile
|
||||||
|
endif |
||||||
|
|
||||||
|
After Width: | Height: | Size: 1015 KiB |
@ -0,0 +1,190 @@ |
|||||||
|
/*
|
||||||
|
Copyright 2012 Jun Wako <wakojun@gmail.com> |
||||||
|
|
||||||
|
This program is free software: you can redistribute it and/or modify |
||||||
|
it under the terms of the GNU General Public License as published by |
||||||
|
the Free Software Foundation, either version 2 of the License, or |
||||||
|
(at your option) any later version. |
||||||
|
|
||||||
|
This program is distributed in the hope that it will be useful, |
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||||
|
GNU General Public License for more details. |
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License |
||||||
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/ |
||||||
|
|
||||||
|
#ifndef CONFIG_H |
||||||
|
#define CONFIG_H |
||||||
|
|
||||||
|
#include "config_common.h" |
||||||
|
|
||||||
|
/* USB Device descriptor parameter */ |
||||||
|
#define VENDOR_ID 0xFEED |
||||||
|
#define PRODUCT_ID 0x6060 |
||||||
|
#define DEVICE_VER 0x0001 |
||||||
|
#define MANUFACTURER geekhack |
||||||
|
#define PRODUCT GH60 |
||||||
|
#define DESCRIPTION t.m.k. keyboard firmware for GH60 |
||||||
|
|
||||||
|
/* key matrix size */ |
||||||
|
#define MATRIX_ROWS 5 |
||||||
|
#define MATRIX_COLS 14 |
||||||
|
|
||||||
|
/*
|
||||||
|
* Keyboard Matrix Assignments |
||||||
|
* |
||||||
|
* Change this to how you wired your keyboard |
||||||
|
* COLS: AVR pins used for columns, left to right |
||||||
|
* ROWS: AVR pins used for rows, top to bottom |
||||||
|
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) |
||||||
|
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) |
||||||
|
* |
||||||
|
*/ |
||||||
|
#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } |
||||||
|
// Rev A
|
||||||
|
// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 }
|
||||||
|
// Rev B/C
|
||||||
|
#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 } |
||||||
|
#define UNUSED_PINS |
||||||
|
|
||||||
|
/* COL2ROW or ROW2COL */ |
||||||
|
#define DIODE_DIRECTION COL2ROW |
||||||
|
|
||||||
|
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ |
||||||
|
#define DEBOUNCING_DELAY 5 |
||||||
|
|
||||||
|
/* define if matrix has ghost (lacks anti-ghosting diodes) */ |
||||||
|
//#define MATRIX_HAS_GHOST
|
||||||
|
|
||||||
|
/* number of backlight levels */ |
||||||
|
#define BACKLIGHT_LEVELS 3 |
||||||
|
|
||||||
|
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ |
||||||
|
#define LOCKING_SUPPORT_ENABLE |
||||||
|
/* Locking resynchronize hack */ |
||||||
|
#define LOCKING_RESYNC_ENABLE |
||||||
|
|
||||||
|
/*
|
||||||
|
* Force NKRO |
||||||
|
* |
||||||
|
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved |
||||||
|
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the |
||||||
|
* makefile for this to work.) |
||||||
|
* |
||||||
|
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) |
||||||
|
* until the next keyboard reset. |
||||||
|
* |
||||||
|
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is |
||||||
|
* fully operational during normal computer usage. |
||||||
|
* |
||||||
|
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) |
||||||
|
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by |
||||||
|
* bootmagic, NKRO mode will always be enabled until it is toggled again during a |
||||||
|
* power-up. |
||||||
|
* |
||||||
|
*/ |
||||||
|
//#define FORCE_NKRO
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Magic Key Options |
||||||
|
* |
||||||
|
* Magic keys are hotkey commands that allow control over firmware functions of |
||||||
|
* the keyboard. They are best used in combination with the HID Listen program, |
||||||
|
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
||||||
|
* |
||||||
|
* The options below allow the magic key functionality to be changed. This is |
||||||
|
* useful if your keyboard/keypad is missing keys and you want magic key support. |
||||||
|
* |
||||||
|
*/ |
||||||
|
|
||||||
|
/* key combination for magic key command */ |
||||||
|
#define IS_COMMAND() ( \ |
||||||
|
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||||
|
) |
||||||
|
|
||||||
|
/* control how magic key switches layers */ |
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
||||||
|
|
||||||
|
/* override magic key keymap */ |
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
||||||
|
//#define MAGIC_KEY_HELP1 H
|
||||||
|
//#define MAGIC_KEY_HELP2 SLASH
|
||||||
|
//#define MAGIC_KEY_DEBUG D
|
||||||
|
//#define MAGIC_KEY_DEBUG_MATRIX X
|
||||||
|
//#define MAGIC_KEY_DEBUG_KBD K
|
||||||
|
//#define MAGIC_KEY_DEBUG_MOUSE M
|
||||||
|
//#define MAGIC_KEY_VERSION V
|
||||||
|
//#define MAGIC_KEY_STATUS S
|
||||||
|
//#define MAGIC_KEY_CONSOLE C
|
||||||
|
//#define MAGIC_KEY_LAYER0_ALT1 ESC
|
||||||
|
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
|
||||||
|
//#define MAGIC_KEY_LAYER0 0
|
||||||
|
//#define MAGIC_KEY_LAYER1 1
|
||||||
|
//#define MAGIC_KEY_LAYER2 2
|
||||||
|
//#define MAGIC_KEY_LAYER3 3
|
||||||
|
//#define MAGIC_KEY_LAYER4 4
|
||||||
|
//#define MAGIC_KEY_LAYER5 5
|
||||||
|
//#define MAGIC_KEY_LAYER6 6
|
||||||
|
//#define MAGIC_KEY_LAYER7 7
|
||||||
|
//#define MAGIC_KEY_LAYER8 8
|
||||||
|
//#define MAGIC_KEY_LAYER9 9
|
||||||
|
//#define MAGIC_KEY_BOOTLOADER PAUSE
|
||||||
|
//#define MAGIC_KEY_LOCK CAPS
|
||||||
|
//#define MAGIC_KEY_EEPROM E
|
||||||
|
//#define MAGIC_KEY_NKRO N
|
||||||
|
//#define MAGIC_KEY_SLEEP_LED Z
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Feature disable options |
||||||
|
* These options are also useful to firmware size reduction. |
||||||
|
*/ |
||||||
|
|
||||||
|
/* disable debug print */ |
||||||
|
//#define NO_DEBUG
|
||||||
|
|
||||||
|
/* disable print */ |
||||||
|
//#define NO_PRINT
|
||||||
|
|
||||||
|
/* disable action features */ |
||||||
|
//#define NO_ACTION_LAYER
|
||||||
|
//#define NO_ACTION_TAPPING
|
||||||
|
//#define NO_ACTION_ONESHOT
|
||||||
|
//#define NO_ACTION_MACRO
|
||||||
|
//#define NO_ACTION_FUNCTION
|
||||||
|
|
||||||
|
/*
|
||||||
|
* RGB Underglow |
||||||
|
* These settings are for the F4 by default: |
||||||
|
*
|
||||||
|
* |
||||||
|
* #define ws2812_PORTREG PORTF |
||||||
|
* #define ws2812_DDRREG DDRF |
||||||
|
* #define ws2812_pin PF4 |
||||||
|
* #define RGBLED_NUM 14 // Number of LEDs
|
||||||
|
* #define RGBLIGHT_HUE_STEP 10 |
||||||
|
* #define RGBLIGHT_SAT_STEP 17 |
||||||
|
* #define RGBLIGHT_VAL_STEP 17 |
||||||
|
* |
||||||
|
* The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects.
|
||||||
|
* To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations.
|
||||||
|
* For details, please check this keymap. keyboard/planck/keymaps/yang/keymap.c |
||||||
|
*/ |
||||||
|
|
||||||
|
/* Deprecated code below
|
||||||
|
#define ws2812_PORTREG PORTF |
||||||
|
#define ws2812_DDRREG DDRF |
||||||
|
#define ws2812_pin PF4 |
||||||
|
*/
|
||||||
|
#define RGB_DI_PIN F4 |
||||||
|
#define RGBLIGHT_TIMER |
||||||
|
#define RGBLED_NUM 8 // Number of LEDs
|
||||||
|
#define RGBLIGHT_HUE_STEP 8 |
||||||
|
#define RGBLIGHT_SAT_STEP 8 |
||||||
|
#define RGBLIGHT_VAL_STEP 8 |
||||||
|
#endif |
||||||
@ -0,0 +1,226 @@ |
|||||||
|
#include "gh60.h" |
||||||
|
#include "action_layer.h" |
||||||
|
|
||||||
|
#define _BL 0 |
||||||
|
#define _AL 1 |
||||||
|
#define _FL 2 |
||||||
|
#define _UL 3 |
||||||
|
|
||||||
|
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { |
||||||
|
/*
|
||||||
|
* Base layer, pretty standard ANSI layout.
|
||||||
|
* ,-----------------------------------------------------------. |
||||||
|
* |FN12| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | |
||||||
|
* |-----------------------------------------------------------| |
||||||
|
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |
||||||
|
* |-----------------------------------------------------------| |
||||||
|
* |Caps/Fn| A| S| D| F| G| H| J| K| L| ;| '|Return | |
||||||
|
* |-----------------------------------------------------------| |
||||||
|
* |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | |
||||||
|
* |-----------------------------------------------------------| |
||||||
|
* |Ctrl|Gui |Alt | Space |Alt |Fn |Menu|Ctrl| |
||||||
|
* `-----------------------------------------------------------' |
||||||
|
*/ |
||||||
|
[_BL] = KEYMAP( |
||||||
|
FN12,1,2,3,4,5,6,7,8,9,0,MINS,EQL,BSPC, \
|
||||||
|
TAB,Q,W,E,R,T,Y,U,I,O,P,LBRC,RBRC,BSLS, \
|
||||||
|
FN2,A,S,D,F,G,H,J,K,L,SCLN,QUOT,NO,ENT, \
|
||||||
|
LSFT,NO,Z,X,C,V,B,N,M,COMM,DOT,SLSH,NO,RSFT, \
|
||||||
|
LCTL,LGUI,LALT, SPC, NO,RALT,FN0,APP, RCTL), |
||||||
|
|
||||||
|
/*
|
||||||
|
* Locking arrow keys to WASD for when you need dedicated arrow keys |
||||||
|
* ,-----------------------------------------------------------. |
||||||
|
* | | | | | | | | | | | | | | | |
||||||
|
* |-----------------------------------------------------------| |
||||||
|
* | | |Up | | | | | | | | | | | | |
||||||
|
* |-----------------------------------------------------------| |
||||||
|
* | |Left|Down|Rght| | | | | | | | | | |
||||||
|
* |-----------------------------------------------------------| |
||||||
|
* | | | | | | | | | | | | | |
||||||
|
* |-----------------------------------------------------------| |
||||||
|
* | | | | | | | | | |
||||||
|
* `-----------------------------------------------------------' |
||||||
|
*/ |
||||||
|
[_AL] = KEYMAP( |
||||||
|
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \
|
||||||
|
TRNS,TRNS,UP,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \
|
||||||
|
TRNS,LEFT,DOWN,RGHT,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \
|
||||||
|
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \
|
||||||
|
TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,TRNS), |
||||||
|
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Primary function layer, mostly the same as the traditional Pok3r layout. |
||||||
|
* ,-------------------------------------------------------------. |
||||||
|
* |`~ | F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12|DEL | |
||||||
|
* |-------------------------------------------------------------| |
||||||
|
* | |_AL| | | | |Calc|PgUp|Up|PgDn|Ptscn|Srlck|Pause| | |
||||||
|
* |-------------------------------------------------------------| |
||||||
|
* | | | | | | |Home|Left|Down|Rght|Ins| | | |
||||||
|
* |-------------------------------------------------------------| |
||||||
|
* | |_UL| | | | | | | | | | | |
||||||
|
* |-------------------------------------------------------------| |
||||||
|
* | | | | | | | | | |
||||||
|
* `-------------------------------------------------------------' |
||||||
|
*/ |
||||||
|
[_FL] = KEYMAP( |
||||||
|
GRAVE,F1,F2,F3,F4,F5,F6,F7,F8,F9,F10,F11,F12, DELETE, \
|
||||||
|
TRNS,FN1,TRNS,TRNS,TRNS,TRNS,CALC,PGUP,UP,PGDN,PSCR,SLCK,PAUS,TRNS, \
|
||||||
|
TRNS,MUTE,_VOLDOWN,_VOLUP,TRNS,TRNS,HOME,LEFT,DOWN,RGHT,INS,TRNS,TRNS,TRNS, \
|
||||||
|
TRNS,TRNS,FN3,TRNS,TRNS,TRNS,TRNS,END,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \
|
||||||
|
TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,TRNS), |
||||||
|
|
||||||
|
/*
|
||||||
|
* Locking layer for controlling the underglow. |
||||||
|
*
|
||||||
|
* ,-----------------------------------------------------------. |
||||||
|
* | | | | | | | | | | | | | | | |
||||||
|
* |-----------------------------------------------------------| |
||||||
|
* | | | | | | | | | | | | | | | |
||||||
|
* |-----------------------------------------------------------| |
||||||
|
* | |On|Mode| | | | | | | | | | | |
||||||
|
* |-----------------------------------------------------------| |
||||||
|
* | | |Hue+|Hue-|Sat+|Sat-|Val+|Val-| | | | | |
||||||
|
* |-----------------------------------------------------------| |
||||||
|
* | | | | | | | | | |
||||||
|
* `-----------------------------------------------------------' |
||||||
|
*/ |
||||||
|
[_UL] = KEYMAP( |
||||||
|
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \
|
||||||
|
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \
|
||||||
|
TRNS,FN4,FN5,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \
|
||||||
|
TRNS,TRNS,TRNS,FN6,FN7,FN8,FN9,FN10,FN11,TRNS,TRNS,TRNS,TRNS,TRNS, \
|
||||||
|
TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,TRNS), |
||||||
|
}; |
||||||
|
|
||||||
|
enum function_id { |
||||||
|
RGBLED_TOGGLE, |
||||||
|
RGBLED_STEP_MODE, |
||||||
|
RGBLED_INCREASE_HUE, |
||||||
|
RGBLED_DECREASE_HUE, |
||||||
|
RGBLED_INCREASE_SAT, |
||||||
|
RGBLED_DECREASE_SAT, |
||||||
|
RGBLED_INCREASE_VAL, |
||||||
|
RGBLED_DECREASE_VAL, |
||||||
|
SHIFT_ESC, |
||||||
|
}; |
||||||
|
|
||||||
|
const uint16_t PROGMEM fn_actions[] = { |
||||||
|
[0] = ACTION_LAYER_MOMENTARY(2), // Momentary Fn overlay
|
||||||
|
[1] = ACTION_LAYER_TOGGLE(1), // Toggle Arrow Layer overlay
|
||||||
|
[2] = ACTION_LAYER_TAP_KEY(2, KC_CAPS), // Tap to toggle caps lock and hold to activate function layer
|
||||||
|
[3] = ACTION_LAYER_TOGGLE(3), // Toggle Underglow Layer overlay
|
||||||
|
[4] = ACTION_FUNCTION(RGBLED_TOGGLE), //Turn on/off underglow
|
||||||
|
[5] = ACTION_FUNCTION(RGBLED_STEP_MODE), // Change underglow mode
|
||||||
|
[6] = ACTION_FUNCTION(RGBLED_INCREASE_HUE), |
||||||
|
[7] = ACTION_FUNCTION(RGBLED_DECREASE_HUE), |
||||||
|
[8] = ACTION_FUNCTION(RGBLED_INCREASE_SAT), |
||||||
|
[9] = ACTION_FUNCTION(RGBLED_DECREASE_SAT), |
||||||
|
[10] = ACTION_FUNCTION(RGBLED_INCREASE_VAL), |
||||||
|
[11] = ACTION_FUNCTION(RGBLED_DECREASE_VAL), |
||||||
|
[12] = ACTION_FUNCTION(SHIFT_ESC), |
||||||
|
}; |
||||||
|
|
||||||
|
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) |
||||||
|
{ |
||||||
|
// MACRODOWN only works in this function
|
||||||
|
switch(id) { |
||||||
|
case 0: |
||||||
|
if (record->event.pressed) { |
||||||
|
register_code(KC_RSFT); |
||||||
|
} else { |
||||||
|
unregister_code(KC_RSFT); |
||||||
|
} |
||||||
|
break; |
||||||
|
} |
||||||
|
return MACRO_NONE; |
||||||
|
}; |
||||||
|
|
||||||
|
void matrix_scan_user(void) { |
||||||
|
|
||||||
|
// Layer LED indicators
|
||||||
|
// ESC led on when in function layer, WASD cluster leds enabled when on arrow cluster
|
||||||
|
uint32_t layer = layer_state; |
||||||
|
if (layer & (1<<1)) { |
||||||
|
gh60_wasd_leds_on(); |
||||||
|
} else { |
||||||
|
gh60_wasd_leds_off(); |
||||||
|
} |
||||||
|
|
||||||
|
if (layer & (1<<2)) { |
||||||
|
gh60_esc_led_on(); |
||||||
|
} else { |
||||||
|
gh60_esc_led_off(); |
||||||
|
} |
||||||
|
}; |
||||||
|
|
||||||
|
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) |
||||||
|
|
||||||
|
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { |
||||||
|
switch (id) { |
||||||
|
case RGBLED_TOGGLE: |
||||||
|
//led operations
|
||||||
|
if (record->event.pressed) { |
||||||
|
rgblight_toggle(); |
||||||
|
} |
||||||
|
break; |
||||||
|
case RGBLED_INCREASE_HUE: |
||||||
|
if (record->event.pressed) { |
||||||
|
rgblight_increase_hue(); |
||||||
|
} |
||||||
|
break; |
||||||
|
case RGBLED_DECREASE_HUE: |
||||||
|
if (record->event.pressed) { |
||||||
|
rgblight_decrease_hue(); |
||||||
|
} |
||||||
|
break; |
||||||
|
case RGBLED_INCREASE_SAT: |
||||||
|
if (record->event.pressed) { |
||||||
|
rgblight_increase_sat(); |
||||||
|
} |
||||||
|
break; |
||||||
|
case RGBLED_DECREASE_SAT: |
||||||
|
if (record->event.pressed) { |
||||||
|
rgblight_decrease_sat(); |
||||||
|
} |
||||||
|
break; |
||||||
|
case RGBLED_INCREASE_VAL: |
||||||
|
if (record->event.pressed) { |
||||||
|
rgblight_increase_val(); |
||||||
|
} |
||||||
|
break; |
||||||
|
case RGBLED_DECREASE_VAL: |
||||||
|
if (record->event.pressed) { |
||||||
|
rgblight_decrease_val(); |
||||||
|
} |
||||||
|
break; |
||||||
|
case RGBLED_STEP_MODE: |
||||||
|
if (record->event.pressed) { |
||||||
|
rgblight_step(); |
||||||
|
} |
||||||
|
break; |
||||||
|
static uint8_t shift_esc_shift_mask; |
||||||
|
// Shift + ESC = ~
|
||||||
|
case SHIFT_ESC: |
||||||
|
shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; |
||||||
|
if (record->event.pressed) { |
||||||
|
if (shift_esc_shift_mask) { |
||||||
|
add_key(KC_GRV); |
||||||
|
send_keyboard_report(); |
||||||
|
} else { |
||||||
|
add_key(KC_ESC); |
||||||
|
send_keyboard_report(); |
||||||
|
} |
||||||
|
} else { |
||||||
|
if (shift_esc_shift_mask) { |
||||||
|
del_key(KC_GRV); |
||||||
|
send_keyboard_report(); |
||||||
|
} else { |
||||||
|
del_key(KC_ESC); |
||||||
|
send_keyboard_report(); |
||||||
|
} |
||||||
|
} |
||||||
|
break; |
||||||
|
} |
||||||
|
}; |
||||||
@ -0,0 +1,16 @@ |
|||||||
|
robotmaxtron's GH60 Layout |
||||||
|
===================== |
||||||
|
|
||||||
|
##Quantum MK Firmware |
||||||
|
For the full Quantum feature list, see the parent readme.md. |
||||||
|
|
||||||
|
* Standard ANSI layout with Pok3r styled function layers |
||||||
|
* ESC key led enables when on function layer |
||||||
|
* Lockable layer with arrow keys on WASD with backlighting to indicate locked on arrow layer |
||||||
|
* Neopixel/WS2812 RGB Underglow Support |
||||||
|
|
||||||
|
## Reference Images |
||||||
|
![Wiring Refererence] (WS2812-wiring.jpg) |
||||||
|
|
||||||
|
### Additional Credits |
||||||
|
Keymap has been based on various keymaps available from the QMK Repo for the GH60-SATAN and KC60 keyboards. |
||||||
@ -0,0 +1 @@ |
|||||||
|
HHKB_JP=yes
|
||||||
@ -0,0 +1,58 @@ |
|||||||
|
#include "hhkb.h" |
||||||
|
|
||||||
|
#define _______ KC_TRNS |
||||||
|
|
||||||
|
|
||||||
|
/* Layer 0: HHKB JP
|
||||||
|
* ,-----------------------------------------------------------. |
||||||
|
* |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 10| -| =|Yen|Bsp| |
||||||
|
* |-----------------------------------------------------------| |
||||||
|
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | |
||||||
|
* |------------------------------------------------------` Ent| |
||||||
|
* |Ctrl | A| S| D| F| G| H| J| K| L| ;| '| `| | |
||||||
|
* |-----------------------------------------------------------| |
||||||
|
* |Shft | Z| X| C| V| B| N| M| ,| .| /| \| Up|Sft| |
||||||
|
* |-----------------------------------------------------------| |
||||||
|
* | ||Ctl|Alt|Cmd| | Spc |Bsp| | | ||Lft|Dwn|Rgh| |
||||||
|
* `-----------------------------------------------------------' |
||||||
|
*/ |
||||||
|
|
||||||
|
/* Layer 1: HHKB mode (HHKB Fn)
|
||||||
|
* ,-----------------------------------------------------------. |
||||||
|
* |Pwr| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| |
||||||
|
* |-----------------------------------------------------------| |
||||||
|
* |Caps | | | | | | | |Psc|Slk|Pus|Up | | | |
||||||
|
* |------------------------------------------------------` | |
||||||
|
* | |VoD|VoU|Mut| | | *| /|Hom|PgU|Lef|Rig| | | |
||||||
|
* |-----------------------------------------------------------| |
||||||
|
* | | | | | | | +| -|End|PgD|Dow| | | | |
||||||
|
* |-----------------------------------------------------------| |
||||||
|
* | || | | | | | | | | || | | | |
||||||
|
* `-----------------------------------------------------------' |
||||||
|
*/ |
||||||
|
|
||||||
|
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { |
||||||
|
[0] = KEYMAP_JP( |
||||||
|
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_JYEN, KC_BSPC, |
||||||
|
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, |
||||||
|
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, |
||||||
|
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_UP, KC_RSFT, |
||||||
|
MO(1), KC_ZKHK, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC, KC_HENK, KC_KANA, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT |
||||||
|
), |
||||||
|
|
||||||
|
[1] = KEYMAP_JP( |
||||||
|
KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, |
||||||
|
KC_CAPS, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, _______, |
||||||
|
_______, KC_VOLD, KC_VOLU, KC_MUTE, KC_PWR, _______, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, _______, KC_PENT, |
||||||
|
_______, _______, _______, _______, _______, _______, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, _______, _______, _______, |
||||||
|
_______, _______, _______, _______, _______, _______ , _______, _______, _______, _______, _______, _______, _______ |
||||||
|
) |
||||||
|
}; |
||||||
|
|
||||||
|
const macro_t *action_get_macro(keyrecord_t *record, uint8_t macro_id, uint8_t opt) { |
||||||
|
return MACRO_NONE; |
||||||
|
} |
||||||
|
|
||||||
|
const uint16_t PROGMEM fn_actions[] = { |
||||||
|
|
||||||
|
}; |
||||||
@ -0,0 +1 @@ |
|||||||
|
HHKB_JP=yes
|
||||||
@ -0,0 +1,65 @@ |
|||||||
|
#include "hhkb.h" |
||||||
|
|
||||||
|
#define _______ KC_TRNS |
||||||
|
|
||||||
|
enum { |
||||||
|
ZER, |
||||||
|
HDN, |
||||||
|
OSY |
||||||
|
}; |
||||||
|
|
||||||
|
|
||||||
|
#define CTL_ESC CTL_T(KC_ESC) |
||||||
|
#define SFT_BSP SFT_T(KC_BSPC) |
||||||
|
|
||||||
|
#define SCRNS3 LGUI(LCTL(LSFT(KC_3))) |
||||||
|
#define SCRNS4 LGUI(LCTL(LSFT(KC_4))) |
||||||
|
|
||||||
|
|
||||||
|
/* hhkb jp ~ layout
|
||||||
|
* ,-----------------------------------------------------------. |
||||||
|
* |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 10| -| =|Yen|Bsp| |
||||||
|
* |-----------------------------------------------------------| |
||||||
|
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | |
||||||
|
* |------------------------------------------------------` Ent| |
||||||
|
* |Ctrl | A| S| D| F| G| H| J| K| L| ;| '| `| | |
||||||
|
* |-----------------------------------------------------------| |
||||||
|
* |Shft | Z| X| C| V| B| N| M| ,| .| /| \| Up|Sft| |
||||||
|
* |-----------------------------------------------------------| |
||||||
|
* | ||Ctl|Alt|Cmd| | Spc |Bsp| | | ||Lft|Dwn|Rgh| |
||||||
|
* `-----------------------------------------------------------' |
||||||
|
*/ |
||||||
|
|
||||||
|
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { |
||||||
|
[ZER] = KEYMAP_JP( |
||||||
|
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_INS, KC_BSPC, |
||||||
|
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, |
||||||
|
CTL_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_GRV, KC_ENT, |
||||||
|
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS, KC_UP, KC_RSFT, |
||||||
|
MO(HDN), KC_LCTL, KC_LALT, KC_LGUI, MO(HDN), KC_SPC, SFT_BSP, MO(HDN), MO(OSY), KC_NO, KC_LEFT, KC_DOWN, KC_RGHT |
||||||
|
), |
||||||
|
|
||||||
|
[HDN] = KEYMAP_JP( |
||||||
|
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, |
||||||
|
_______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, _______, |
||||||
|
_______, KC_TILD, KC_GRV, KC_BSLS, KC_PIPE, KC_MINS, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_TILD, KC_GRV, _______, _______, |
||||||
|
_______, KC_VOLD, KC_VOLU, KC_MUTE, KC_PWR, _______, _______, KC_ENT, _______, _______, _______, _______, KC_PGUP, _______, |
||||||
|
_______, _______, _______, _______, _______, KC_UNDS , KC_DEL, _______, _______, _______, KC_HOME, KC_PGDN, KC_END |
||||||
|
), |
||||||
|
|
||||||
|
[OSY] = KEYMAP_JP( |
||||||
|
_______, _______, _______, SCRNS3, SCRNS4, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, |
||||||
|
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, |
||||||
|
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, |
||||||
|
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, |
||||||
|
_______, _______, _______, _______, _______, _______ , _______, _______, _______, _______, _______, _______, _______ |
||||||
|
) |
||||||
|
}; |
||||||
|
|
||||||
|
const macro_t *action_get_macro(keyrecord_t *record, uint8_t macro_id, uint8_t opt) { |
||||||
|
return MACRO_NONE; |
||||||
|
} |
||||||
|
|
||||||
|
const uint16_t PROGMEM fn_actions[] = { |
||||||
|
|
||||||
|
}; |
||||||
@ -0,0 +1,113 @@ |
|||||||
|
/*
|
||||||
|
Copyright 2016 Fred Sundvik <fsundvik@gmail.com> |
||||||
|
|
||||||
|
This program is free software: you can redistribute it and/or modify |
||||||
|
it under the terms of the GNU General Public License as published by |
||||||
|
the Free Software Foundation, either version 2 of the License, or |
||||||
|
(at your option) any later version. |
||||||
|
|
||||||
|
This program is distributed in the hope that it will be useful, |
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||||
|
GNU General Public License for more details. |
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License |
||||||
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/ |
||||||
|
|
||||||
|
#ifndef _GDISP_LLD_BOARD_H |
||||||
|
#define _GDISP_LLD_BOARD_H |
||||||
|
|
||||||
|
static const I2CConfig i2ccfg = { |
||||||
|
400000 // clock speed (Hz); 400kHz max for IS31
|
||||||
|
}; |
||||||
|
|
||||||
|
#define GDISP_SCREEN_WIDTH 7 |
||||||
|
#define GDISP_SCREEN_HEIGHT 7 |
||||||
|
|
||||||
|
static const uint8_t led_mask[] = { |
||||||
|
0xFF, 0x00, /* C1-1 -> C1-16 */ |
||||||
|
0xFF, 0x00, /* C2-1 -> C2-16 */ |
||||||
|
0xFF, 0x00, /* C3-1 -> C3-16 */ |
||||||
|
0xFF, 0x00, /* C4-1 -> C4-16 */ |
||||||
|
0x3F, 0x00, /* C5-1 -> C5-16 */ |
||||||
|
0x00, 0x00, /* C6-1 -> C6-16 */ |
||||||
|
0x00, 0x00, /* C7-1 -> C7-16 */ |
||||||
|
0x00, 0x00, /* C8-1 -> C8-16 */ |
||||||
|
0x00, 0x00, /* C9-1 -> C9-16 */ |
||||||
|
}; |
||||||
|
|
||||||
|
// The address of the LED
|
||||||
|
#define LA(c, r) (c + r * 16 ) |
||||||
|
// Need to be an address that is not mapped, but inside the range of the controller matrix
|
||||||
|
#define NA LA(8, 8) |
||||||
|
|
||||||
|
// The numbers in the comments are the led numbers DXX on the PCB
|
||||||
|
// The mapping is taken from the schematic of left hand side
|
||||||
|
static const uint8_t led_mapping[GDISP_SCREEN_HEIGHT][GDISP_SCREEN_WIDTH] = { |
||||||
|
// 45 44 43 42 41 40 39
|
||||||
|
{ LA(1, 1), LA(1, 0), LA(0, 4), LA(0, 3), LA(0, 2), LA(0, 1), LA(0, 0)}, |
||||||
|
// 52 51 50 49 48 47 46
|
||||||
|
{ LA(2, 3), LA(2, 2), LA(2, 1), LA(2, 0), LA(1, 4), LA(1, 3), LA(1, 2) }, |
||||||
|
// 58 57 56 55 54 53 N/A
|
||||||
|
{ LA(3, 4), LA(3, 3), LA(3, 2), LA(3, 1), LA(3, 0), LA(2, 4), NA }, |
||||||
|
// 67 66 65 64 63 62 61
|
||||||
|
{ LA(5, 3), LA(5, 2), LA(5, 1), LA(5, 0), LA(4, 4), LA(4, 3), LA(4, 2) }, |
||||||
|
// 76 75 74 73 72 60 59
|
||||||
|
{ LA(7, 3), LA(7, 2), LA(7, 1), LA(7, 0), LA(6, 3), LA(4, 1), LA(4, 0) }, |
||||||
|
// N/A N/A N/A N/A N/A N/A 68
|
||||||
|
{ NA, NA, NA, NA, NA, NA, LA(5, 4) }, |
||||||
|
// N/A N/A N/A N/A 71 70 69
|
||||||
|
{ NA, NA, NA, NA, LA(6, 2), LA(6, 1), LA(6, 0) }, |
||||||
|
}; |
||||||
|
|
||||||
|
|
||||||
|
#define IS31_ADDR_DEFAULT 0x74 // AD connected to GND
|
||||||
|
#define IS31_TIMEOUT 5000 |
||||||
|
|
||||||
|
static GFXINLINE void init_board(GDisplay *g) { |
||||||
|
(void) g; |
||||||
|
/* I2C pins */ |
||||||
|
palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL
|
||||||
|
palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA
|
||||||
|
palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL); |
||||||
|
palClearPad(GPIOB, 16); |
||||||
|
/* start I2C */ |
||||||
|
i2cStart(&I2CD1, &i2ccfg); |
||||||
|
// try high drive (from kiibohd)
|
||||||
|
I2CD1.i2c->C2 |= I2Cx_C2_HDRS; |
||||||
|
// try glitch fixing (from kiibohd)
|
||||||
|
I2CD1.i2c->FLT = 4; |
||||||
|
} |
||||||
|
|
||||||
|
static GFXINLINE void post_init_board(GDisplay *g) { |
||||||
|
(void) g; |
||||||
|
} |
||||||
|
|
||||||
|
static GFXINLINE const uint8_t* get_led_mask(GDisplay* g) { |
||||||
|
(void) g; |
||||||
|
return led_mask; |
||||||
|
} |
||||||
|
|
||||||
|
static GFXINLINE uint8_t get_led_address(GDisplay* g, uint16_t x, uint16_t y) |
||||||
|
{ |
||||||
|
(void) g; |
||||||
|
return led_mapping[y][x]; |
||||||
|
} |
||||||
|
|
||||||
|
static GFXINLINE void set_hardware_shutdown(GDisplay* g, bool shutdown) { |
||||||
|
(void) g; |
||||||
|
if(!shutdown) { |
||||||
|
palSetPad(GPIOB, 16); |
||||||
|
} |
||||||
|
else { |
||||||
|
palClearPad(GPIOB, 16); |
||||||
|
} |
||||||
|
} |
||||||
|
|
||||||
|
static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) { |
||||||
|
(void) g; |
||||||
|
i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, data, length, 0, 0, US2ST(IS31_TIMEOUT)); |
||||||
|
} |
||||||
|
|
||||||
|
#endif /* _GDISP_LLD_BOARD_H */ |
||||||
@ -0,0 +1,2 @@ |
|||||||
|
GFXINC += drivers/gdisp/IS31FL3731C
|
||||||
|
GFXSRC += drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c
|
||||||
@ -0,0 +1,333 @@ |
|||||||
|
/*
|
||||||
|
Copyright 2016 Fred Sundvik <fsundvik@gmail.com> |
||||||
|
|
||||||
|
This program is free software: you can redistribute it and/or modify |
||||||
|
it under the terms of the GNU General Public License as published by |
||||||
|
the Free Software Foundation, either version 2 of the License, or |
||||||
|
(at your option) any later version. |
||||||
|
|
||||||
|
This program is distributed in the hope that it will be useful, |
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||||
|
GNU General Public License for more details. |
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License |
||||||
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/ |
||||||
|
|
||||||
|
#include "gfx.h" |
||||||
|
|
||||||
|
#if GFX_USE_GDISP |
||||||
|
|
||||||
|
#define GDISP_DRIVER_VMT GDISPVMT_IS31FL3731C_ERGODOX |
||||||
|
#include "drivers/gdisp/IS31FL3731C/gdisp_lld_config.h" |
||||||
|
#include "src/gdisp/gdisp_driver.h" |
||||||
|
|
||||||
|
#include "board_IS31FL3731C.h" |
||||||
|
|
||||||
|
/*===========================================================================*/ |
||||||
|
/* Driver local definitions. */ |
||||||
|
/*===========================================================================*/ |
||||||
|
|
||||||
|
#ifndef GDISP_SCREEN_HEIGHT |
||||||
|
#define GDISP_SCREEN_HEIGHT 9 |
||||||
|
#endif |
||||||
|
#ifndef GDISP_SCREEN_WIDTH |
||||||
|
#define GDISP_SCREEN_WIDTH 16 |
||||||
|
#endif |
||||||
|
#ifndef GDISP_INITIAL_CONTRAST |
||||||
|
#define GDISP_INITIAL_CONTRAST 0 |
||||||
|
#endif |
||||||
|
#ifndef GDISP_INITIAL_BACKLIGHT |
||||||
|
#define GDISP_INITIAL_BACKLIGHT 100 |
||||||
|
#endif |
||||||
|
|
||||||
|
#define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER<<0) |
||||||
|
|
||||||
|
#define IS31_ADDR_DEFAULT 0x74 |
||||||
|
|
||||||
|
#define IS31_REG_CONFIG 0x00 |
||||||
|
// bits in reg
|
||||||
|
#define IS31_REG_CONFIG_PICTUREMODE 0x00 |
||||||
|
#define IS31_REG_CONFIG_AUTOPLAYMODE 0x08 |
||||||
|
#define IS31_REG_CONFIG_AUDIOPLAYMODE 0x18 |
||||||
|
// D2:D0 bits are starting frame for autoplay mode
|
||||||
|
|
||||||
|
#define IS31_REG_PICTDISP 0x01 // D2:D0 frame select for picture mode
|
||||||
|
|
||||||
|
#define IS31_REG_AUTOPLAYCTRL1 0x02 |
||||||
|
// D6:D4 number of loops (000=infty)
|
||||||
|
// D2:D0 number of frames to be used
|
||||||
|
|
||||||
|
#define IS31_REG_AUTOPLAYCTRL2 0x03 // D5:D0 delay time (*11ms)
|
||||||
|
|
||||||
|
#define IS31_REG_DISPLAYOPT 0x05 |
||||||
|
#define IS31_REG_DISPLAYOPT_INTENSITY_SAME 0x20 // same intensity for all frames
|
||||||
|
#define IS31_REG_DISPLAYOPT_BLINK_ENABLE 0x8 |
||||||
|
// D2:D0 bits blink period time (*0.27s)
|
||||||
|
|
||||||
|
#define IS31_REG_AUDIOSYNC 0x06 |
||||||
|
#define IS31_REG_AUDIOSYNC_ENABLE 0x1 |
||||||
|
|
||||||
|
#define IS31_REG_FRAMESTATE 0x07 |
||||||
|
|
||||||
|
#define IS31_REG_BREATHCTRL1 0x08 |
||||||
|
// D6:D4 fade out time (26ms*2^i)
|
||||||
|
// D2:D0 fade in time (26ms*2^i)
|
||||||
|
|
||||||
|
#define IS31_REG_BREATHCTRL2 0x09 |
||||||
|
#define IS31_REG_BREATHCTRL2_ENABLE 0x10 |
||||||
|
// D2:D0 extinguish time (3.5ms*2^i)
|
||||||
|
|
||||||
|
#define IS31_REG_SHUTDOWN 0x0A |
||||||
|
#define IS31_REG_SHUTDOWN_OFF 0x0 |
||||||
|
#define IS31_REG_SHUTDOWN_ON 0x1 |
||||||
|
|
||||||
|
#define IS31_REG_AGCCTRL 0x0B |
||||||
|
#define IS31_REG_ADCRATE 0x0C |
||||||
|
|
||||||
|
#define IS31_COMMANDREGISTER 0xFD |
||||||
|
#define IS31_FUNCTIONREG 0x0B // helpfully called 'page nine'
|
||||||
|
#define IS31_FUNCTIONREG_SIZE 0xD |
||||||
|
|
||||||
|
#define IS31_FRAME_SIZE 0xB4 |
||||||
|
|
||||||
|
#define IS31_PWM_REG 0x24 |
||||||
|
#define IS31_PWM_SIZE 0x90 |
||||||
|
|
||||||
|
#define IS31_LED_MASK_SIZE 0x12 |
||||||
|
#define IS31_SCREEN_WIDTH 16 |
||||||
|
|
||||||
|
#define IS31 |
||||||
|
|
||||||
|
//Generated by http://jared.geek.nz/2013/feb/linear-led-pwm
|
||||||
|
const unsigned char cie[256] = { |
||||||
|
0, 0, 0, 0, 0, 1, 1, 1, 1, 1, |
||||||
|
1, 1, 1, 1, 2, 2, 2, 2, 2, 2, |
||||||
|
2, 2, 2, 3, 3, 3, 3, 3, 3, 3, |
||||||
|
3, 4, 4, 4, 4, 4, 4, 5, 5, 5, |
||||||
|
5, 5, 6, 6, 6, 6, 6, 7, 7, 7, |
||||||
|
7, 8, 8, 8, 8, 9, 9, 9, 10, 10, |
||||||
|
10, 10, 11, 11, 11, 12, 12, 12, 13, 13, |
||||||
|
13, 14, 14, 15, 15, 15, 16, 16, 17, 17, |
||||||
|
17, 18, 18, 19, 19, 20, 20, 21, 21, 22, |
||||||
|
22, 23, 23, 24, 24, 25, 25, 26, 26, 27, |
||||||
|
28, 28, 29, 29, 30, 31, 31, 32, 32, 33, |
||||||
|
34, 34, 35, 36, 37, 37, 38, 39, 39, 40, |
||||||
|
41, 42, 43, 43, 44, 45, 46, 47, 47, 48, |
||||||
|
49, 50, 51, 52, 53, 54, 54, 55, 56, 57, |
||||||
|
58, 59, 60, 61, 62, 63, 64, 65, 66, 67, |
||||||
|
68, 70, 71, 72, 73, 74, 75, 76, 77, 79, |
||||||
|
80, 81, 82, 83, 85, 86, 87, 88, 90, 91, |
||||||
|
92, 94, 95, 96, 98, 99, 100, 102, 103, 105, |
||||||
|
106, 108, 109, 110, 112, 113, 115, 116, 118, 120, |
||||||
|
121, 123, 124, 126, 128, 129, 131, 132, 134, 136, |
||||||
|
138, 139, 141, 143, 145, 146, 148, 150, 152, 154, |
||||||
|
155, 157, 159, 161, 163, 165, 167, 169, 171, 173, |
||||||
|
175, 177, 179, 181, 183, 185, 187, 189, 191, 193, |
||||||
|
196, 198, 200, 202, 204, 207, 209, 211, 214, 216, |
||||||
|
218, 220, 223, 225, 228, 230, 232, 235, 237, 240, |
||||||
|
242, 245, 247, 250, 252, 255, |
||||||
|
}; |
||||||
|
|
||||||
|
|
||||||
|
/*===========================================================================*/ |
||||||
|
/* Driver local functions. */ |
||||||
|
/*===========================================================================*/ |
||||||
|
|
||||||
|
typedef struct{ |
||||||
|
uint8_t write_buffer_offset; |
||||||
|
uint8_t write_buffer[IS31_FRAME_SIZE]; |
||||||
|
uint8_t frame_buffer[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH]; |
||||||
|
uint8_t page; |
||||||
|
}__attribute__((__packed__)) PrivData; |
||||||
|
|
||||||
|
// Some common routines and macros
|
||||||
|
#define PRIV(g) ((PrivData*)g->priv) |
||||||
|
|
||||||
|
/*===========================================================================*/ |
||||||
|
/* Driver exported functions. */ |
||||||
|
/*===========================================================================*/ |
||||||
|
|
||||||
|
static GFXINLINE void write_page(GDisplay* g, uint8_t page) { |
||||||
|
uint8_t tx[2] __attribute__((aligned(2))); |
||||||
|
tx[0] = IS31_COMMANDREGISTER; |
||||||
|
tx[1] = page; |
||||||
|
write_data(g, tx, 2); |
||||||
|
} |
||||||
|
|
||||||
|
static GFXINLINE void write_register(GDisplay* g, uint8_t page, uint8_t reg, uint8_t data) { |
||||||
|
uint8_t tx[2] __attribute__((aligned(2))); |
||||||
|
tx[0] = reg; |
||||||
|
tx[1] = data; |
||||||
|
write_page(g, page); |
||||||
|
write_data(g, tx, 2); |
||||||
|
} |
||||||
|
|
||||||
|
static GFXINLINE void write_ram(GDisplay *g, uint8_t page, uint16_t offset, uint16_t length) { |
||||||
|
PRIV(g)->write_buffer_offset = offset; |
||||||
|
write_page(g, page); |
||||||
|
write_data(g, (uint8_t*)PRIV(g), length + 1); |
||||||
|
} |
||||||
|
|
||||||
|
LLDSPEC bool_t gdisp_lld_init(GDisplay *g) { |
||||||
|
// The private area is the display surface.
|
||||||
|
g->priv = gfxAlloc(sizeof(PrivData)); |
||||||
|
__builtin_memset(PRIV(g), 0, sizeof(PrivData)); |
||||||
|
PRIV(g)->page = 0; |
||||||
|
|
||||||
|
// Initialise the board interface
|
||||||
|
init_board(g); |
||||||
|
gfxSleepMilliseconds(10); |
||||||
|
|
||||||
|
// zero function page, all registers (assuming full_page is all zeroes)
|
||||||
|
write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE); |
||||||
|
set_hardware_shutdown(g, false); |
||||||
|
gfxSleepMilliseconds(10); |
||||||
|
// software shutdown
|
||||||
|
write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); |
||||||
|
gfxSleepMilliseconds(10); |
||||||
|
// zero function page, all registers
|
||||||
|
write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE); |
||||||
|
gfxSleepMilliseconds(10); |
||||||
|
|
||||||
|
|
||||||
|
// zero all LED registers on all 8 pages, and enable the mask
|
||||||
|
__builtin_memcpy(PRIV(g)->write_buffer, get_led_mask(g), IS31_LED_MASK_SIZE); |
||||||
|
for(uint8_t i=0; i<8; i++) { |
||||||
|
write_ram(g, i, 0, IS31_FRAME_SIZE); |
||||||
|
gfxSleepMilliseconds(1); |
||||||
|
} |
||||||
|
|
||||||
|
// software shutdown disable (i.e. turn stuff on)
|
||||||
|
write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON); |
||||||
|
gfxSleepMilliseconds(10); |
||||||
|
|
||||||
|
// Finish Init
|
||||||
|
post_init_board(g); |
||||||
|
|
||||||
|
/* Initialise the GDISP structure */ |
||||||
|
g->g.Width = GDISP_SCREEN_WIDTH; |
||||||
|
g->g.Height = GDISP_SCREEN_HEIGHT; |
||||||
|
g->g.Orientation = GDISP_ROTATE_0; |
||||||
|
g->g.Powermode = powerOn; |
||||||
|
g->g.Backlight = GDISP_INITIAL_BACKLIGHT; |
||||||
|
g->g.Contrast = GDISP_INITIAL_CONTRAST; |
||||||
|
return TRUE; |
||||||
|
} |
||||||
|
|
||||||
|
#if GDISP_HARDWARE_FLUSH |
||||||
|
LLDSPEC void gdisp_lld_flush(GDisplay *g) { |
||||||
|
// Don't flush if we don't need it.
|
||||||
|
if (!(g->flags & GDISP_FLG_NEEDFLUSH)) |
||||||
|
return; |
||||||
|
|
||||||
|
PRIV(g)->page++; |
||||||
|
PRIV(g)->page %= 2; |
||||||
|
// TODO: some smarter algorithm for this
|
||||||
|
// We should run only one physical page at a time
|
||||||
|
// This way we don't need to send so much data, and
|
||||||
|
// we could use slightly less memory
|
||||||
|
uint8_t* src = PRIV(g)->frame_buffer; |
||||||
|
for (int y=0;y<GDISP_SCREEN_HEIGHT;y++) { |
||||||
|
for (int x=0;x<GDISP_SCREEN_WIDTH;x++) { |
||||||
|
PRIV(g)->write_buffer[get_led_address(g, x, y)]=cie[*src]; |
||||||
|
++src; |
||||||
|
} |
||||||
|
} |
||||||
|
write_ram(g, PRIV(g)->page, IS31_PWM_REG, IS31_PWM_SIZE); |
||||||
|
gfxSleepMilliseconds(1); |
||||||
|
write_register(g, IS31_FUNCTIONREG, IS31_REG_PICTDISP, PRIV(g)->page); |
||||||
|
|
||||||
|
g->flags &= ~GDISP_FLG_NEEDFLUSH; |
||||||
|
} |
||||||
|
#endif |
||||||
|
|
||||||
|
#if GDISP_HARDWARE_DRAWPIXEL |
||||||
|
LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) { |
||||||
|
coord_t x, y; |
||||||
|
|
||||||
|
switch(g->g.Orientation) { |
||||||
|
default: |
||||||
|
case GDISP_ROTATE_0: |
||||||
|
x = g->p.x; |
||||||
|
y = g->p.y; |
||||||
|
break; |
||||||
|
case GDISP_ROTATE_180: |
||||||
|
x = GDISP_SCREEN_WIDTH-1 - g->p.x; |
||||||
|
y = g->p.y; |
||||||
|
break; |
||||||
|
} |
||||||
|
PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x] = gdispColor2Native(g->p.color); |
||||||
|
g->flags |= GDISP_FLG_NEEDFLUSH; |
||||||
|
} |
||||||
|
#endif |
||||||
|
|
||||||
|
#if GDISP_HARDWARE_PIXELREAD |
||||||
|
LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) { |
||||||
|
coord_t x, y; |
||||||
|
|
||||||
|
switch(g->g.Orientation) { |
||||||
|
default: |
||||||
|
case GDISP_ROTATE_0: |
||||||
|
x = g->p.x; |
||||||
|
y = g->p.y; |
||||||
|
break; |
||||||
|
case GDISP_ROTATE_180: |
||||||
|
x = GDISP_SCREEN_WIDTH-1 - g->p.x; |
||||||
|
y = g->p.y; |
||||||
|
break; |
||||||
|
} |
||||||
|
return gdispNative2Color(PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x]); |
||||||
|
} |
||||||
|
#endif |
||||||
|
|
||||||
|
#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL |
||||||
|
LLDSPEC void gdisp_lld_control(GDisplay *g) { |
||||||
|
switch(g->p.x) { |
||||||
|
case GDISP_CONTROL_POWER: |
||||||
|
if (g->g.Powermode == (powermode_t)g->p.ptr) |
||||||
|
return; |
||||||
|
switch((powermode_t)g->p.ptr) { |
||||||
|
case powerOff: |
||||||
|
case powerSleep: |
||||||
|
case powerDeepSleep: |
||||||
|
write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); |
||||||
|
break; |
||||||
|
case powerOn: |
||||||
|
write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON); |
||||||
|
break; |
||||||
|
default: |
||||||
|
return; |
||||||
|
} |
||||||
|
g->g.Powermode = (powermode_t)g->p.ptr; |
||||||
|
return; |
||||||
|
|
||||||
|
case GDISP_CONTROL_ORIENTATION: |
||||||
|
if (g->g.Orientation == (orientation_t)g->p.ptr) |
||||||
|
return; |
||||||
|
switch((orientation_t)g->p.ptr) { |
||||||
|
/* Rotation is handled by the drawing routines */ |
||||||
|
case GDISP_ROTATE_0: |
||||||
|
case GDISP_ROTATE_180: |
||||||
|
g->g.Height = GDISP_SCREEN_HEIGHT; |
||||||
|
g->g.Width = GDISP_SCREEN_WIDTH; |
||||||
|
break; |
||||||
|
case GDISP_ROTATE_90: |
||||||
|
case GDISP_ROTATE_270: |
||||||
|
g->g.Height = GDISP_SCREEN_WIDTH; |
||||||
|
g->g.Width = GDISP_SCREEN_HEIGHT; |
||||||
|
break; |
||||||
|
default: |
||||||
|
return; |
||||||
|
} |
||||||
|
g->g.Orientation = (orientation_t)g->p.ptr; |
||||||
|
return; |
||||||
|
|
||||||
|
case GDISP_CONTROL_CONTRAST: |
||||||
|
return; |
||||||
|
} |
||||||
|
} |
||||||
|
#endif // GDISP_NEED_CONTROL
|
||||||
|
|
||||||
|
#endif // GFX_USE_GDISP
|
||||||
@ -0,0 +1,36 @@ |
|||||||
|
/*
|
||||||
|
Copyright 2016 Fred Sundvik <fsundvik@gmail.com> |
||||||
|
|
||||||
|
This program is free software: you can redistribute it and/or modify |
||||||
|
it under the terms of the GNU General Public License as published by |
||||||
|
the Free Software Foundation, either version 2 of the License, or |
||||||
|
(at your option) any later version. |
||||||
|
|
||||||
|
This program is distributed in the hope that it will be useful, |
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||||
|
GNU General Public License for more details. |
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License |
||||||
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/ |
||||||
|
|
||||||
|
#ifndef _GDISP_LLD_CONFIG_H |
||||||
|
#define _GDISP_LLD_CONFIG_H |
||||||
|
|
||||||
|
#if GFX_USE_GDISP |
||||||
|
|
||||||
|
/*===========================================================================*/ |
||||||
|
/* Driver hardware support. */ |
||||||
|
/*===========================================================================*/ |
||||||
|
|
||||||
|
#define GDISP_HARDWARE_FLUSH TRUE // This controller requires flushing
|
||||||
|
#define GDISP_HARDWARE_DRAWPIXEL TRUE |
||||||
|
#define GDISP_HARDWARE_PIXELREAD TRUE |
||||||
|
#define GDISP_HARDWARE_CONTROL TRUE |
||||||
|
|
||||||
|
#define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_GRAY256 |
||||||
|
|
||||||
|
#endif /* GFX_USE_GDISP */ |
||||||
|
|
||||||
|
#endif /* _GDISP_LLD_CONFIG_H */ |
||||||
@ -0,0 +1,2 @@ |
|||||||
|
GFXINC += drivers/gdisp/emulator_lcd
|
||||||
|
GFXSRC += drivers/gdisp/emulator_lcd/emulator_lcd.c
|
||||||
@ -0,0 +1,10 @@ |
|||||||
|
#define GDISP_DRIVER_VMT GDISPVMT_EMULATOR_LCD_ERGODOX |
||||||
|
#define GDISP_HARDWARE_DRAWPIXEL TRUE |
||||||
|
#define GDISP_HARDWARE_PIXELREAD TRUE |
||||||
|
#define GDISP_HARDWARE_CONTROL TRUE |
||||||
|
#define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_MONO |
||||||
|
#define GDISP_SCREEN_WIDTH 128 |
||||||
|
#define GDISP_SCREEN_HEIGHT 32 |
||||||
|
#define ROTATE_180_IS_FLIP |
||||||
|
|
||||||
|
#include "emulator/emulator_driver_impl.h" |
||||||
@ -0,0 +1,2 @@ |
|||||||
|
GFXINC += drivers/gdisp/emulator_led
|
||||||
|
GFXSRC += drivers/gdisp/emulator_led/emulator_led.c
|
||||||
@ -0,0 +1,10 @@ |
|||||||
|
#define GDISP_DRIVER_VMT GDISPVMT_EMULATOR_LED_ERGODOX |
||||||
|
#define GDISP_HARDWARE_DRAWPIXEL TRUE |
||||||
|
#define GDISP_HARDWARE_PIXELREAD TRUE |
||||||
|
#define GDISP_HARDWARE_CONTROL TRUE |
||||||
|
#define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_MONO |
||||||
|
#define GDISP_SCREEN_WIDTH 7 |
||||||
|
#define GDISP_SCREEN_HEIGHT 7 |
||||||
|
#define ROTATE_180_IS_FLIP |
||||||
|
|
||||||
|
#include "emulator/emulator_driver_impl.h" |
||||||
@ -0,0 +1,127 @@ |
|||||||
|
/*
|
||||||
|
* This file is subject to the terms of the GFX License. If a copy of |
||||||
|
* the license was not distributed with this file, you can obtain one at: |
||||||
|
* |
||||||
|
* http://ugfx.org/license.html
|
||||||
|
*/ |
||||||
|
|
||||||
|
#ifndef _GDISP_LLD_BOARD_H |
||||||
|
#define _GDISP_LLD_BOARD_H |
||||||
|
|
||||||
|
#include "print.h" |
||||||
|
|
||||||
|
#define ST7565_LCD_BIAS ST7565_LCD_BIAS_9 // actually 6
|
||||||
|
#define ST7565_ADC ST7565_ADC_NORMAL |
||||||
|
#define ST7565_COM_SCAN ST7565_COM_SCAN_DEC |
||||||
|
#define ST7565_PAGE_ORDER 0,1,2,3 |
||||||
|
/*
|
||||||
|
* Custom page order for several LCD boards, e.g. HEM12864-99 |
||||||
|
* #define ST7565_PAGE_ORDER 4,5,6,7,0,1,2,3 |
||||||
|
*/ |
||||||
|
|
||||||
|
#define ST7565_GPIOPORT GPIOC |
||||||
|
#define ST7565_PORT PORTC |
||||||
|
#define ST7565_A0_PIN 7 |
||||||
|
#define ST7565_RST_PIN 8 |
||||||
|
#define ST7565_MOSI_PIN 6 |
||||||
|
#define ST7565_SLCK_PIN 5 |
||||||
|
#define ST7565_SS_PIN 4 |
||||||
|
|
||||||
|
#define palSetPadModeRaw(portname, bits) \ |
||||||
|
ST7565_PORT->PCR[ST7565_##portname##_PIN] = bits |
||||||
|
|
||||||
|
#define palSetPadModeNamed(portname, portmode) \ |
||||||
|
palSetPadMode(ST7565_GPIOPORT, ST7565_##portname##_PIN, portmode) |
||||||
|
|
||||||
|
#define ST7565_SPI_MODE PORTx_PCRn_DSE | PORTx_PCRn_MUX(2) |
||||||
|
// DSPI Clock and Transfer Attributes
|
||||||
|
// Frame Size: 8 bits
|
||||||
|
// MSB First
|
||||||
|
// CLK Low by default
|
||||||
|
static const SPIConfig spi1config = { |
||||||
|
NULL, |
||||||
|
/* HW dependent part.*/ |
||||||
|
ST7565_GPIOPORT, |
||||||
|
ST7565_SS_PIN, |
||||||
|
SPIx_CTARn_FMSZ(7) |
||||||
|
| SPIx_CTARn_ASC(7) |
||||||
|
| SPIx_CTARn_DT(7) |
||||||
|
| SPIx_CTARn_CSSCK(7) |
||||||
|
| SPIx_CTARn_PBR(0) |
||||||
|
| SPIx_CTARn_BR(7) |
||||||
|
//SPI_CR1_BR_0
|
||||||
|
}; |
||||||
|
|
||||||
|
static bool_t st7565_is_data_mode = 1; |
||||||
|
|
||||||
|
static GFXINLINE void init_board(GDisplay *g) { |
||||||
|
(void) g; |
||||||
|
palSetPadModeNamed(A0, PAL_MODE_OUTPUT_PUSHPULL); |
||||||
|
palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN); |
||||||
|
st7565_is_data_mode = 1; |
||||||
|
palSetPadModeNamed(RST, PAL_MODE_OUTPUT_PUSHPULL); |
||||||
|
palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN); |
||||||
|
palSetPadModeRaw(MOSI, ST7565_SPI_MODE); |
||||||
|
palSetPadModeRaw(SLCK, ST7565_SPI_MODE); |
||||||
|
palSetPadModeRaw(SS, ST7565_SPI_MODE); |
||||||
|
|
||||||
|
spiInit(); |
||||||
|
spiStart(&SPID1, &spi1config); |
||||||
|
spiSelect(&SPID1); |
||||||
|
} |
||||||
|
|
||||||
|
static GFXINLINE void post_init_board(GDisplay *g) { |
||||||
|
(void) g; |
||||||
|
} |
||||||
|
|
||||||
|
static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) { |
||||||
|
(void) g; |
||||||
|
if (state) { |
||||||
|
palClearPad(ST7565_GPIOPORT, ST7565_RST_PIN); |
||||||
|
} |
||||||
|
else { |
||||||
|
palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN); |
||||||
|
} |
||||||
|
} |
||||||
|
|
||||||
|
static GFXINLINE void acquire_bus(GDisplay *g) { |
||||||
|
(void) g; |
||||||
|
// Only the LCD is using the SPI bus, so no need to acquire
|
||||||
|
// spiAcquireBus(&SPID1);
|
||||||
|
} |
||||||
|
|
||||||
|
static GFXINLINE void release_bus(GDisplay *g) { |
||||||
|
(void) g; |
||||||
|
// Only the LCD is using the SPI bus, so no need to release
|
||||||
|
//spiReleaseBus(&SPID1);
|
||||||
|
} |
||||||
|
|
||||||
|
static GFXINLINE void write_cmd(GDisplay *g, uint8_t cmd) { |
||||||
|
(void) g; |
||||||
|
if (st7565_is_data_mode) { |
||||||
|
// The sleeps need to be at lest 10 vs 25 ns respectively
|
||||||
|
// So let's sleep two ticks, one tick might not be enough
|
||||||
|
// if we are at the end of the tick
|
||||||
|
chThdSleep(2); |
||||||
|
palClearPad(ST7565_GPIOPORT, ST7565_A0_PIN); |
||||||
|
chThdSleep(2); |
||||||
|
st7565_is_data_mode = 0; |
||||||
|
} |
||||||
|
spiSend(&SPID1, 1, &cmd); |
||||||
|
} |
||||||
|
|
||||||
|
static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) { |
||||||
|
(void) g; |
||||||
|
if (!st7565_is_data_mode) { |
||||||
|
// The sleeps need to be at lest 10 vs 25 ns respectively
|
||||||
|
// So let's sleep two ticks, one tick might not be enough
|
||||||
|
// if we are at the end of the tick
|
||||||
|
chThdSleep(2); |
||||||
|
palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN); |
||||||
|
chThdSleep(2); |
||||||
|
st7565_is_data_mode = 1; |
||||||
|
} |
||||||
|
spiSend(&SPID1, length, data); |
||||||
|
} |
||||||
|
|
||||||
|
#endif /* _GDISP_LLD_BOARD_H */ |
||||||
@ -0,0 +1,2 @@ |
|||||||
|
GFXINC += drivers/gdisp/st7565ergodox
|
||||||
|
GFXSRC += drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c
|
||||||
@ -0,0 +1,292 @@ |
|||||||
|
/*
|
||||||
|
* This file is subject to the terms of the GFX License. If a copy of |
||||||
|
* the license was not distributed with this file, you can obtain one at: |
||||||
|
* |
||||||
|
* http://ugfx.org/license.html
|
||||||
|
*/ |
||||||
|
|
||||||
|
#include "gfx.h" |
||||||
|
|
||||||
|
#if GFX_USE_GDISP |
||||||
|
|
||||||
|
#define GDISP_DRIVER_VMT GDISPVMT_ST7565_ERGODOX |
||||||
|
#include "drivers/gdisp/st7565ergodox/gdisp_lld_config.h" |
||||||
|
#include "src/gdisp/gdisp_driver.h" |
||||||
|
|
||||||
|
#include "board_ST7565.h" |
||||||
|
|
||||||
|
/*===========================================================================*/ |
||||||
|
/* Driver local definitions. */ |
||||||
|
/*===========================================================================*/ |
||||||
|
|
||||||
|
#ifndef GDISP_SCREEN_HEIGHT |
||||||
|
#define GDISP_SCREEN_HEIGHT 32 |
||||||
|
#endif |
||||||
|
#ifndef GDISP_SCREEN_WIDTH |
||||||
|
#define GDISP_SCREEN_WIDTH 128 |
||||||
|
#endif |
||||||
|
#ifndef GDISP_INITIAL_CONTRAST |
||||||
|
#define GDISP_INITIAL_CONTRAST 0 |
||||||
|
#endif |
||||||
|
#ifndef GDISP_INITIAL_BACKLIGHT |
||||||
|
#define GDISP_INITIAL_BACKLIGHT 100 |
||||||
|
#endif |
||||||
|
|
||||||
|
#define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER<<0) |
||||||
|
|
||||||
|
#include "drivers/gdisp/st7565ergodox/st7565.h" |
||||||
|
|
||||||
|
/*===========================================================================*/ |
||||||
|
/* Driver config defaults for backward compatibility. */ |
||||||
|
/*===========================================================================*/ |
||||||
|
#ifndef ST7565_LCD_BIAS |
||||||
|
#define ST7565_LCD_BIAS ST7565_LCD_BIAS_7 |
||||||
|
#endif |
||||||
|
#ifndef ST7565_ADC |
||||||
|
#define ST7565_ADC ST7565_ADC_NORMAL |
||||||
|
#endif |
||||||
|
#ifndef ST7565_COM_SCAN |
||||||
|
#define ST7565_COM_SCAN ST7565_COM_SCAN_INC |
||||||
|
#endif |
||||||
|
#ifndef ST7565_PAGE_ORDER |
||||||
|
#define ST7565_PAGE_ORDER 0,1,2,3 |
||||||
|
#endif |
||||||
|
|
||||||
|
/*===========================================================================*/ |
||||||
|
/* Driver local functions. */ |
||||||
|
/*===========================================================================*/ |
||||||
|
|
||||||
|
typedef struct{ |
||||||
|
bool_t buffer2; |
||||||
|
uint8_t ram[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH / 8]; |
||||||
|
}PrivData; |
||||||
|
|
||||||
|
// Some common routines and macros
|
||||||
|
#define PRIV(g) ((PrivData*)g->priv) |
||||||
|
#define RAM(g) (PRIV(g)->ram) |
||||||
|
#define write_cmd2(g, cmd1, cmd2) { write_cmd(g, cmd1); write_cmd(g, cmd2); } |
||||||
|
#define write_cmd3(g, cmd1, cmd2, cmd3) { write_cmd(g, cmd1); write_cmd(g, cmd2); write_cmd(g, cmd3); } |
||||||
|
|
||||||
|
// Some common routines and macros
|
||||||
|
#define delay(us) gfxSleepMicroseconds(us) |
||||||
|
#define delay_ms(ms) gfxSleepMilliseconds(ms) |
||||||
|
|
||||||
|
#define xyaddr(x, y) ((x) + ((y)>>3)*GDISP_SCREEN_WIDTH) |
||||||
|
#define xybit(y) (1<<((y)&7)) |
||||||
|
|
||||||
|
/*===========================================================================*/ |
||||||
|
/* Driver exported functions. */ |
||||||
|
/*===========================================================================*/ |
||||||
|
|
||||||
|
/*
|
||||||
|
* As this controller can't update on a pixel boundary we need to maintain the |
||||||
|
* the entire display surface in memory so that we can do the necessary bit |
||||||
|
* operations. Fortunately it is a small display in monochrome. |
||||||
|
* 64 * 128 / 8 = 1024 bytes. |
||||||
|
*/ |
||||||
|
|
||||||
|
LLDSPEC bool_t gdisp_lld_init(GDisplay *g) { |
||||||
|
// The private area is the display surface.
|
||||||
|
g->priv = gfxAlloc(sizeof(PrivData)); |
||||||
|
PRIV(g)->buffer2 = false; |
||||||
|
|
||||||
|
// Initialise the board interface
|
||||||
|
init_board(g); |
||||||
|
|
||||||
|
// Hardware reset
|
||||||
|
setpin_reset(g, TRUE); |
||||||
|
gfxSleepMilliseconds(20); |
||||||
|
setpin_reset(g, FALSE); |
||||||
|
gfxSleepMilliseconds(20); |
||||||
|
|
||||||
|
acquire_bus(g); |
||||||
|
write_cmd(g, ST7565_DISPLAY_OFF); |
||||||
|
write_cmd(g, ST7565_LCD_BIAS); |
||||||
|
write_cmd(g, ST7565_ADC); |
||||||
|
write_cmd(g, ST7565_COM_SCAN); |
||||||
|
|
||||||
|
write_cmd(g, ST7565_START_LINE | 0); |
||||||
|
|
||||||
|
write_cmd(g, ST7565_RESISTOR_RATIO | 0x6); |
||||||
|
|
||||||
|
// turn on voltage converter (VC=1, VR=0, VF=0)
|
||||||
|
write_cmd(g, ST7565_POWER_CONTROL | 0x04); |
||||||
|
delay_ms(50); |
||||||
|
|
||||||
|
// turn on voltage regulator (VC=1, VR=1, VF=0)
|
||||||
|
write_cmd(g, ST7565_POWER_CONTROL | 0x06); |
||||||
|
delay_ms(50); |
||||||
|
|
||||||
|
// turn on voltage follower (VC=1, VR=1, VF=1)
|
||||||
|
write_cmd(g, ST7565_POWER_CONTROL | 0x07); |
||||||
|
delay_ms(50); |
||||||
|
|
||||||
|
write_cmd(g, 0xE2); |
||||||
|
write_cmd(g, ST7565_COM_SCAN); |
||||||
|
write_cmd2(g, ST7565_CONTRAST, GDISP_INITIAL_CONTRAST*64/101); |
||||||
|
//write_cmd2(g, ST7565_CONTRAST, 0);
|
||||||
|
write_cmd(g, ST7565_DISPLAY_ON); |
||||||
|
write_cmd(g, ST7565_ALLON_NORMAL); |
||||||
|
write_cmd(g, ST7565_INVERT_DISPLAY); |
||||||
|
|
||||||
|
write_cmd(g, ST7565_RMW); |
||||||
|
|
||||||
|
// Finish Init
|
||||||
|
post_init_board(g); |
||||||
|
|
||||||
|
// Release the bus
|
||||||
|
release_bus(g); |
||||||
|
|
||||||
|
/* Initialise the GDISP structure */ |
||||||
|
g->g.Width = GDISP_SCREEN_WIDTH; |
||||||
|
g->g.Height = GDISP_SCREEN_HEIGHT; |
||||||
|
g->g.Orientation = GDISP_ROTATE_0; |
||||||
|
g->g.Powermode = powerOn; |
||||||
|
g->g.Backlight = GDISP_INITIAL_BACKLIGHT; |
||||||
|
g->g.Contrast = GDISP_INITIAL_CONTRAST; |
||||||
|
return TRUE; |
||||||
|
} |
||||||
|
|
||||||
|
#if GDISP_HARDWARE_FLUSH |
||||||
|
LLDSPEC void gdisp_lld_flush(GDisplay *g) { |
||||||
|
unsigned p; |
||||||
|
|
||||||
|
// Don't flush if we don't need it.
|
||||||
|
if (!(g->flags & GDISP_FLG_NEEDFLUSH)) |
||||||
|
return; |
||||||
|
|
||||||
|
acquire_bus(g); |
||||||
|
unsigned dstOffset = (PRIV(g)->buffer2 ? 4 : 0); |
||||||
|
for (p = 0; p < 4; p++) { |
||||||
|
write_cmd(g, ST7565_PAGE | (p + dstOffset)); |
||||||
|
write_cmd(g, ST7565_COLUMN_MSB | 0); |
||||||
|
write_cmd(g, ST7565_COLUMN_LSB | 0); |
||||||
|
write_cmd(g, ST7565_RMW); |
||||||
|
write_data(g, RAM(g) + (p*GDISP_SCREEN_WIDTH), GDISP_SCREEN_WIDTH); |
||||||
|
} |
||||||
|
unsigned line = (PRIV(g)->buffer2 ? 32 : 0); |
||||||
|
write_cmd(g, ST7565_START_LINE | line); |
||||||
|
PRIV(g)->buffer2 = !PRIV(g)->buffer2; |
||||||
|
release_bus(g); |
||||||
|
|
||||||
|
g->flags &= ~GDISP_FLG_NEEDFLUSH; |
||||||
|
} |
||||||
|
#endif |
||||||
|
|
||||||
|
#if GDISP_HARDWARE_DRAWPIXEL |
||||||
|
LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) { |
||||||
|
coord_t x, y; |
||||||
|
|
||||||
|
switch(g->g.Orientation) { |
||||||
|
default: |
||||||
|
case GDISP_ROTATE_0: |
||||||
|
x = g->p.x; |
||||||
|
y = g->p.y; |
||||||
|
break; |
||||||
|
case GDISP_ROTATE_90: |
||||||
|
x = g->p.y; |
||||||
|
y = GDISP_SCREEN_HEIGHT-1 - g->p.x; |
||||||
|
break; |
||||||
|
case GDISP_ROTATE_180: |
||||||
|
x = GDISP_SCREEN_WIDTH-1 - g->p.x; |
||||||
|
y = GDISP_SCREEN_HEIGHT-1 - g->p.y; |
||||||
|
break; |
||||||
|
case GDISP_ROTATE_270: |
||||||
|
x = GDISP_SCREEN_HEIGHT-1 - g->p.y; |
||||||
|
y = g->p.x; |
||||||
|
break; |
||||||
|
} |
||||||
|
if (gdispColor2Native(g->p.color) != Black) |
||||||
|
RAM(g)[xyaddr(x, y)] |= xybit(y); |
||||||
|
else |
||||||
|
RAM(g)[xyaddr(x, y)] &= ~xybit(y); |
||||||
|
g->flags |= GDISP_FLG_NEEDFLUSH; |
||||||
|
} |
||||||
|
#endif |
||||||
|
|
||||||
|
#if GDISP_HARDWARE_PIXELREAD |
||||||
|
LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) { |
||||||
|
coord_t x, y; |
||||||
|
|
||||||
|
switch(g->g.Orientation) { |
||||||
|
default: |
||||||
|
case GDISP_ROTATE_0: |
||||||
|
x = g->p.x; |
||||||
|
y = g->p.y; |
||||||
|
break; |
||||||
|
case GDISP_ROTATE_90: |
||||||
|
x = g->p.y; |
||||||
|
y = GDISP_SCREEN_HEIGHT-1 - g->p.x; |
||||||
|
break; |
||||||
|
case GDISP_ROTATE_180: |
||||||
|
x = GDISP_SCREEN_WIDTH-1 - g->p.x; |
||||||
|
y = GDISP_SCREEN_HEIGHT-1 - g->p.y; |
||||||
|
break; |
||||||
|
case GDISP_ROTATE_270: |
||||||
|
x = GDISP_SCREEN_HEIGHT-1 - g->p.y; |
||||||
|
y = g->p.x; |
||||||
|
break; |
||||||
|
} |
||||||
|
return (RAM(g)[xyaddr(x, y)] & xybit(y)) ? White : Black; |
||||||
|
} |
||||||
|
#endif |
||||||
|
|
||||||
|
#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL |
||||||
|
LLDSPEC void gdisp_lld_control(GDisplay *g) { |
||||||
|
switch(g->p.x) { |
||||||
|
case GDISP_CONTROL_POWER: |
||||||
|
if (g->g.Powermode == (powermode_t)g->p.ptr) |
||||||
|
return; |
||||||
|
switch((powermode_t)g->p.ptr) { |
||||||
|
case powerOff: |
||||||
|
case powerSleep: |
||||||
|
case powerDeepSleep: |
||||||
|
acquire_bus(g); |
||||||
|
write_cmd(g, ST7565_DISPLAY_OFF); |
||||||
|
release_bus(g); |
||||||
|
break; |
||||||
|
case powerOn: |
||||||
|
acquire_bus(g); |
||||||
|
write_cmd(g, ST7565_DISPLAY_ON); |
||||||
|
release_bus(g); |
||||||
|
break; |
||||||
|
default: |
||||||
|
return; |
||||||
|
} |
||||||
|
g->g.Powermode = (powermode_t)g->p.ptr; |
||||||
|
return; |
||||||
|
|
||||||
|
case GDISP_CONTROL_ORIENTATION: |
||||||
|
if (g->g.Orientation == (orientation_t)g->p.ptr) |
||||||
|
return; |
||||||
|
switch((orientation_t)g->p.ptr) { |
||||||
|
/* Rotation is handled by the drawing routines */ |
||||||
|
case GDISP_ROTATE_0: |
||||||
|
case GDISP_ROTATE_180: |
||||||
|
g->g.Height = GDISP_SCREEN_HEIGHT; |
||||||
|
g->g.Width = GDISP_SCREEN_WIDTH; |
||||||
|
break; |
||||||
|
case GDISP_ROTATE_90: |
||||||
|
case GDISP_ROTATE_270: |
||||||
|
g->g.Height = GDISP_SCREEN_WIDTH; |
||||||
|
g->g.Width = GDISP_SCREEN_HEIGHT; |
||||||
|
break; |
||||||
|
default: |
||||||
|
return; |
||||||
|
} |
||||||
|
g->g.Orientation = (orientation_t)g->p.ptr; |
||||||
|
return; |
||||||
|
|
||||||
|
case GDISP_CONTROL_CONTRAST: |
||||||
|
if ((unsigned)g->p.ptr > 100) |
||||||
|
g->p.ptr = (void *)100; |
||||||
|
acquire_bus(g); |
||||||
|
write_cmd2(g, ST7565_CONTRAST, ((((unsigned)g->p.ptr)<<6)/101) & 0x3F); |
||||||
|
release_bus(g); |
||||||
|
g->g.Contrast = (unsigned)g->p.ptr; |
||||||
|
return; |
||||||
|
} |
||||||
|
} |
||||||
|
#endif // GDISP_NEED_CONTROL
|
||||||
|
|
||||||
|
#endif // GFX_USE_GDISP
|
||||||
@ -0,0 +1,26 @@ |
|||||||
|
/*
|
||||||
|
* This file is subject to the terms of the GFX License. If a copy of |
||||||
|
* the license was not distributed with this file, you can obtain one at: |
||||||
|
* |
||||||
|
* http://ugfx.org/license.html
|
||||||
|
*/ |
||||||
|
|
||||||
|
#ifndef _GDISP_LLD_CONFIG_H |
||||||
|
#define _GDISP_LLD_CONFIG_H |
||||||
|
|
||||||
|
#if GFX_USE_GDISP |
||||||
|
|
||||||
|
/*===========================================================================*/ |
||||||
|
/* Driver hardware support. */ |
||||||
|
/*===========================================================================*/ |
||||||
|
|
||||||
|
#define GDISP_HARDWARE_FLUSH TRUE // This controller requires flushing
|
||||||
|
#define GDISP_HARDWARE_DRAWPIXEL TRUE |
||||||
|
#define GDISP_HARDWARE_PIXELREAD TRUE |
||||||
|
#define GDISP_HARDWARE_CONTROL TRUE |
||||||
|
|
||||||
|
#define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_MONO |
||||||
|
|
||||||
|
#endif /* GFX_USE_GDISP */ |
||||||
|
|
||||||
|
#endif /* _GDISP_LLD_CONFIG_H */ |
||||||
@ -0,0 +1,37 @@ |
|||||||
|
/*
|
||||||
|
* This file is subject to the terms of the GFX License. If a copy of |
||||||
|
* the license was not distributed with this file, you can obtain one at: |
||||||
|
* |
||||||
|
* http://ugfx.org/license.html
|
||||||
|
*/ |
||||||
|
|
||||||
|
#ifndef _ST7565_H |
||||||
|
#define _ST7565_H |
||||||
|
|
||||||
|
#define ST7565_CONTRAST 0x81 |
||||||
|
#define ST7565_ALLON_NORMAL 0xA4 |
||||||
|
#define ST7565_ALLON 0xA5 |
||||||
|
#define ST7565_POSITIVE_DISPLAY 0xA6 |
||||||
|
#define ST7565_INVERT_DISPLAY 0xA7 |
||||||
|
#define ST7565_DISPLAY_OFF 0xAE |
||||||
|
#define ST7565_DISPLAY_ON 0xAF |
||||||
|
|
||||||
|
#define ST7565_LCD_BIAS_7 0xA3 |
||||||
|
#define ST7565_LCD_BIAS_9 0xA2 |
||||||
|
|
||||||
|
#define ST7565_ADC_NORMAL 0xA0 |
||||||
|
#define ST7565_ADC_REVERSE 0xA1 |
||||||
|
|
||||||
|
#define ST7565_COM_SCAN_INC 0xC0 |
||||||
|
#define ST7565_COM_SCAN_DEC 0xC8 |
||||||
|
|
||||||
|
#define ST7565_START_LINE 0x40 |
||||||
|
#define ST7565_PAGE 0xB0 |
||||||
|
#define ST7565_COLUMN_MSB 0x10 |
||||||
|
#define ST7565_COLUMN_LSB 0x00 |
||||||
|
#define ST7565_RMW 0xE0 |
||||||
|
|
||||||
|
#define ST7565_RESISTOR_RATIO 0x20 |
||||||
|
#define ST7565_POWER_CONTROL 0x28 |
||||||
|
|
||||||
|
#endif /* _ST7565_H */ |
||||||
@ -0,0 +1,331 @@ |
|||||||
|
/**
|
||||||
|
* This file has a different license to the rest of the uGFX system. |
||||||
|
* You can copy, modify and distribute this file as you see fit. |
||||||
|
* You do not need to publish your source modifications to this file. |
||||||
|
* The only thing you are not permitted to do is to relicense it |
||||||
|
* under a different license. |
||||||
|
*/ |
||||||
|
|
||||||
|
/**
|
||||||
|
* Copy this file into your project directory and rename it as gfxconf.h |
||||||
|
* Edit your copy to turn on the uGFX features you want to use. |
||||||
|
* The values below are the defaults. |
||||||
|
* |
||||||
|
* Only remove the comments from lines where you want to change the |
||||||
|
* default value. This allows definitions to be included from |
||||||
|
* driver makefiles when required and provides the best future |
||||||
|
* compatibility for your project. |
||||||
|
* |
||||||
|
* Please use spaces instead of tabs in this file. |
||||||
|
*/ |
||||||
|
|
||||||
|
#ifndef _GFXCONF_H |
||||||
|
#define _GFXCONF_H |
||||||
|
|
||||||
|
|
||||||
|
///////////////////////////////////////////////////////////////////////////
|
||||||
|
// GOS - One of these must be defined, preferably in your Makefile //
|
||||||
|
///////////////////////////////////////////////////////////////////////////
|
||||||
|
//#define GFX_USE_OS_CHIBIOS TRUE
|
||||||
|
//#define GFX_USE_OS_FREERTOS FALSE
|
||||||
|
// #define GFX_FREERTOS_USE_TRACE FALSE
|
||||||
|
//#define GFX_USE_OS_WIN32 FALSE
|
||||||
|
//#define GFX_USE_OS_LINUX FALSE
|
||||||
|
//#define GFX_USE_OS_OSX FALSE
|
||||||
|
//#define GFX_USE_OS_ECOS FALSE
|
||||||
|
//#define GFX_USE_OS_RAWRTOS FALSE
|
||||||
|
//#define GFX_USE_OS_ARDUINO FALSE
|
||||||
|
//#define GFX_USE_OS_KEIL FALSE
|
||||||
|
//#define GFX_USE_OS_CMSIS FALSE
|
||||||
|
//#define GFX_USE_OS_RAW32 FALSE
|
||||||
|
// #define INTERRUPTS_OFF() optional_code
|
||||||
|
// #define INTERRUPTS_ON() optional_code
|
||||||
|
// These are not defined by default for some reason
|
||||||
|
#define GOS_NEED_X_THREADS FALSE |
||||||
|
#define GOS_NEED_X_HEAP FALSE |
||||||
|
|
||||||
|
// Options that (should where relevant) apply to all operating systems
|
||||||
|
#define GFX_NO_INLINE FALSE |
||||||
|
// #define GFX_COMPILER GFX_COMPILER_UNKNOWN
|
||||||
|
// #define GFX_CPU GFX_CPU_UNKNOWN
|
||||||
|
// #define GFX_OS_HEAP_SIZE 0
|
||||||
|
// #define GFX_OS_NO_INIT FALSE
|
||||||
|
// #define GFX_OS_INIT_NO_WARNING FALSE
|
||||||
|
// #define GFX_OS_PRE_INIT_FUNCTION myHardwareInitRoutine
|
||||||
|
// #define GFX_OS_EXTRA_INIT_FUNCTION myOSInitRoutine
|
||||||
|
// #define GFX_OS_EXTRA_DEINIT_FUNCTION myOSDeInitRoutine
|
||||||
|
|
||||||
|
|
||||||
|
///////////////////////////////////////////////////////////////////////////
|
||||||
|
// GDISP //
|
||||||
|
///////////////////////////////////////////////////////////////////////////
|
||||||
|
#define GFX_USE_GDISP TRUE |
||||||
|
|
||||||
|
//#define GDISP_NEED_AUTOFLUSH FALSE
|
||||||
|
//#define GDISP_NEED_TIMERFLUSH FALSE
|
||||||
|
//#define GDISP_NEED_VALIDATION TRUE
|
||||||
|
//#define GDISP_NEED_CLIP TRUE
|
||||||
|
#define GDISP_NEED_CIRCLE TRUE |
||||||
|
#define GDISP_NEED_ELLIPSE TRUE |
||||||
|
#define GDISP_NEED_ARC TRUE |
||||||
|
#define GDISP_NEED_ARCSECTORS TRUE |
||||||
|
#define GDISP_NEED_CONVEX_POLYGON TRUE |
||||||
|
//#define GDISP_NEED_SCROLL FALSE
|
||||||
|
#define GDISP_NEED_PIXELREAD TRUE |
||||||
|
#define GDISP_NEED_CONTROL TRUE |
||||||
|
//#define GDISP_NEED_QUERY FALSE
|
||||||
|
//#define GDISP_NEED_MULTITHREAD FALSE
|
||||||
|
//#define GDISP_NEED_STREAMING FALSE
|
||||||
|
#define GDISP_NEED_TEXT TRUE |
||||||
|
// #define GDISP_NEED_TEXT_WORDWRAP FALSE
|
||||||
|
// #define GDISP_NEED_ANTIALIAS FALSE
|
||||||
|
// #define GDISP_NEED_UTF8 FALSE
|
||||||
|
#define GDISP_NEED_TEXT_KERNING TRUE |
||||||
|
// #define GDISP_INCLUDE_FONT_UI1 FALSE
|
||||||
|
// #define GDISP_INCLUDE_FONT_UI2 FALSE // The smallest preferred font.
|
||||||
|
// #define GDISP_INCLUDE_FONT_LARGENUMBERS FALSE
|
||||||
|
// #define GDISP_INCLUDE_FONT_DEJAVUSANS10 FALSE
|
||||||
|
// #define GDISP_INCLUDE_FONT_DEJAVUSANS12 FALSE
|
||||||
|
// #define GDISP_INCLUDE_FONT_DEJAVUSANS16 FALSE
|
||||||
|
// #define GDISP_INCLUDE_FONT_DEJAVUSANS20 FALSE
|
||||||
|
// #define GDISP_INCLUDE_FONT_DEJAVUSANS24 FALSE
|
||||||
|
// #define GDISP_INCLUDE_FONT_DEJAVUSANS32 FALSE
|
||||||
|
#define GDISP_INCLUDE_FONT_DEJAVUSANSBOLD12 TRUE |
||||||
|
// #define GDISP_INCLUDE_FONT_FIXED_10X20 FALSE
|
||||||
|
// #define GDISP_INCLUDE_FONT_FIXED_7X14 FALSE
|
||||||
|
#define GDISP_INCLUDE_FONT_FIXED_5X8 TRUE |
||||||
|
// #define GDISP_INCLUDE_FONT_DEJAVUSANS12_AA FALSE
|
||||||
|
// #define GDISP_INCLUDE_FONT_DEJAVUSANS16_AA FALSE
|
||||||
|
// #define GDISP_INCLUDE_FONT_DEJAVUSANS20_AA FALSE
|
||||||
|
// #define GDISP_INCLUDE_FONT_DEJAVUSANS24_AA FALSE
|
||||||
|
// #define GDISP_INCLUDE_FONT_DEJAVUSANS32_AA FALSE
|
||||||
|
// #define GDISP_INCLUDE_FONT_DEJAVUSANSBOLD12_AA FALSE
|
||||||
|
// #define GDISP_INCLUDE_USER_FONTS FALSE
|
||||||
|
|
||||||
|
//#define GDISP_NEED_IMAGE FALSE
|
||||||
|
// #define GDISP_NEED_IMAGE_NATIVE FALSE
|
||||||
|
// #define GDISP_NEED_IMAGE_GIF FALSE
|
||||||
|
// #define GDISP_NEED_IMAGE_BMP FALSE
|
||||||
|
// #define GDISP_NEED_IMAGE_BMP_1 FALSE
|
||||||
|
// #define GDISP_NEED_IMAGE_BMP_4 FALSE
|
||||||
|
// #define GDISP_NEED_IMAGE_BMP_4_RLE FALSE
|
||||||
|
// #define GDISP_NEED_IMAGE_BMP_8 FALSE
|
||||||
|
// #define GDISP_NEED_IMAGE_BMP_8_RLE FALSE
|
||||||
|
// #define GDISP_NEED_IMAGE_BMP_16 FALSE
|
||||||
|
// #define GDISP_NEED_IMAGE_BMP_24 FALSE
|
||||||
|
// #define GDISP_NEED_IMAGE_BMP_32 FALSE
|
||||||
|
// #define GDISP_NEED_IMAGE_JPG FALSE
|
||||||
|
// #define GDISP_NEED_IMAGE_PNG FALSE
|
||||||
|
// #define GDISP_NEED_IMAGE_ACCOUNTING FALSE
|
||||||
|
#ifdef EMULATOR |
||||||
|
#define GDISP_NEED_PIXMAP TRUE |
||||||
|
#endif |
||||||
|
// #define GDISP_NEED_PIXMAP_IMAGE FALSE
|
||||||
|
|
||||||
|
//#define GDISP_DEFAULT_ORIENTATION GDISP_ROTATE_LANDSCAPE // If not defined the native hardware orientation is used.
|
||||||
|
//#define GDISP_LINEBUF_SIZE 128
|
||||||
|
//#define GDISP_STARTUP_COLOR Black
|
||||||
|
#define GDISP_NEED_STARTUP_LOGO FALSE |
||||||
|
|
||||||
|
//#define GDISP_TOTAL_DISPLAYS 2
|
||||||
|
|
||||||
|
#ifndef EMULATOR |
||||||
|
#define GDISP_DRIVER_LIST GDISPVMT_ST7565_ERGODOX, GDISPVMT_IS31FL3731C_ERGODOX |
||||||
|
#else |
||||||
|
#define GDISP_DRIVER_LIST GDISPVMT_EMULATOR_LCD_ERGODOX, GDISPVMT_EMULATOR_LED_ERGODOX |
||||||
|
#endif |
||||||
|
|
||||||
|
#ifdef GDISP_DRIVER_LIST |
||||||
|
// For code and speed optimization define as TRUE or FALSE if all controllers have the same capability
|
||||||
|
#define GDISP_HARDWARE_STREAM_WRITE FALSE |
||||||
|
#define GDISP_HARDWARE_STREAM_READ FALSE |
||||||
|
#define GDISP_HARDWARE_STREAM_POS FALSE |
||||||
|
#define GDISP_HARDWARE_DRAWPIXEL TRUE |
||||||
|
#define GDISP_HARDWARE_CLEARS FALSE |
||||||
|
#define GDISP_HARDWARE_FILLS FALSE |
||||||
|
#define GDISP_HARDWARE_BITFILLS FALSE |
||||||
|
#define GDISP_HARDWARE_SCROLL FALSE |
||||||
|
#define GDISP_HARDWARE_PIXELREAD TRUE |
||||||
|
#define GDISP_HARDWARE_CONTROL TRUE |
||||||
|
#define GDISP_HARDWARE_QUERY FALSE |
||||||
|
#define GDISP_HARDWARE_CLIP FALSE |
||||||
|
|
||||||
|
#define GDISP_PIXELFORMAT GDISP_PIXELFORMAT_RGB888 |
||||||
|
#endif |
||||||
|
|
||||||
|
// The custom format is not defined for some reason, so define it as error
|
||||||
|
// so we don't get compiler warnings
|
||||||
|
#define GDISP_PIXELFORMAT_CUSTOM GDISP_PIXELFORMAT_ERROR |
||||||
|
|
||||||
|
#define GDISP_USE_GFXNET FALSE |
||||||
|
// #define GDISP_GFXNET_PORT 13001
|
||||||
|
// #define GDISP_GFXNET_CUSTOM_LWIP_STARTUP FALSE
|
||||||
|
// #define GDISP_DONT_WAIT_FOR_NET_DISPLAY FALSE
|
||||||
|
// #define GDISP_GFXNET_UNSAFE_SOCKETS FALSE
|
||||||
|
|
||||||
|
|
||||||
|
///////////////////////////////////////////////////////////////////////////
|
||||||
|
// GWIN //
|
||||||
|
///////////////////////////////////////////////////////////////////////////
|
||||||
|
#define GFX_USE_GWIN FALSE |
||||||
|
|
||||||
|
//#define GWIN_NEED_WINDOWMANAGER FALSE
|
||||||
|
// #define GWIN_REDRAW_IMMEDIATE FALSE
|
||||||
|
// #define GWIN_REDRAW_SINGLEOP FALSE
|
||||||
|
// #define GWIN_NEED_FLASHING FALSE
|
||||||
|
// #define GWIN_FLASHING_PERIOD 250
|
||||||
|
|
||||||
|
//#define GWIN_NEED_CONSOLE FALSE
|
||||||
|
// #define GWIN_CONSOLE_USE_HISTORY FALSE
|
||||||
|
// #define GWIN_CONSOLE_HISTORY_AVERAGING FALSE
|
||||||
|
// #define GWIN_CONSOLE_HISTORY_ATCREATE FALSE
|
||||||
|
// #define GWIN_CONSOLE_ESCSEQ FALSE
|
||||||
|
// #define GWIN_CONSOLE_USE_BASESTREAM FALSE
|
||||||
|
// #define GWIN_CONSOLE_USE_FLOAT FALSE
|
||||||
|
//#define GWIN_NEED_GRAPH FALSE
|
||||||
|
//#define GWIN_NEED_GL3D FALSE
|
||||||
|
|
||||||
|
//#define GWIN_NEED_WIDGET FALSE
|
||||||
|
//#define GWIN_FOCUS_HIGHLIGHT_WIDTH 1
|
||||||
|
// #define GWIN_NEED_LABEL FALSE
|
||||||
|
// #define GWIN_LABEL_ATTRIBUTE FALSE
|
||||||
|
// #define GWIN_NEED_BUTTON FALSE
|
||||||
|
// #define GWIN_BUTTON_LAZY_RELEASE FALSE
|
||||||
|
// #define GWIN_NEED_SLIDER FALSE
|
||||||
|
// #define GWIN_SLIDER_NOSNAP FALSE
|
||||||
|
// #define GWIN_SLIDER_DEAD_BAND 5
|
||||||
|
// #define GWIN_SLIDER_TOGGLE_INC 20
|
||||||
|
// #define GWIN_NEED_CHECKBOX FALSE
|
||||||
|
// #define GWIN_NEED_IMAGE FALSE
|
||||||
|
// #define GWIN_NEED_IMAGE_ANIMATION FALSE
|
||||||
|
// #define GWIN_NEED_RADIO FALSE
|
||||||
|
// #define GWIN_NEED_LIST FALSE
|
||||||
|
// #define GWIN_NEED_LIST_IMAGES FALSE
|
||||||
|
// #define GWIN_NEED_PROGRESSBAR FALSE
|
||||||
|
// #define GWIN_PROGRESSBAR_AUTO FALSE
|
||||||
|
// #define GWIN_NEED_KEYBOARD FALSE
|
||||||
|
// #define GWIN_KEYBOARD_DEFAULT_LAYOUT VirtualKeyboard_English1
|
||||||
|
// #define GWIN_NEED_KEYBOARD_ENGLISH1 TRUE
|
||||||
|
// #define GWIN_NEED_TEXTEDIT FALSE
|
||||||
|
// #define GWIN_FLAT_STYLING FALSE
|
||||||
|
// #define GWIN_WIDGET_TAGS FALSE
|
||||||
|
|
||||||
|
//#define GWIN_NEED_CONTAINERS FALSE
|
||||||
|
// #define GWIN_NEED_CONTAINER FALSE
|
||||||
|
// #define GWIN_NEED_FRAME FALSE
|
||||||
|
// #define GWIN_NEED_TABSET FALSE
|
||||||
|
// #define GWIN_TABSET_TABHEIGHT 18
|
||||||
|
|
||||||
|
|
||||||
|
///////////////////////////////////////////////////////////////////////////
|
||||||
|
// GEVENT //
|
||||||
|
///////////////////////////////////////////////////////////////////////////
|
||||||
|
#define GFX_USE_GEVENT TRUE |
||||||
|
|
||||||
|
//#define GEVENT_ASSERT_NO_RESOURCE FALSE
|
||||||
|
//#define GEVENT_MAXIMUM_SIZE 32
|
||||||
|
//#define GEVENT_MAX_SOURCE_LISTENERS 32
|
||||||
|
|
||||||
|
|
||||||
|
///////////////////////////////////////////////////////////////////////////
|
||||||
|
// GTIMER //
|
||||||
|
///////////////////////////////////////////////////////////////////////////
|
||||||
|
#define GFX_USE_GTIMER FALSE |
||||||
|
|
||||||
|
//#define GTIMER_THREAD_PRIORITY HIGH_PRIORITY
|
||||||
|
//#define GTIMER_THREAD_WORKAREA_SIZE 2048
|
||||||
|
|
||||||
|
|
||||||
|
///////////////////////////////////////////////////////////////////////////
|
||||||
|
// GQUEUE //
|
||||||
|
///////////////////////////////////////////////////////////////////////////
|
||||||
|
#define GFX_USE_GQUEUE FALSE |
||||||
|
|
||||||
|
//#define GQUEUE_NEED_ASYNC FALSE
|
||||||
|
//#define GQUEUE_NEED_GSYNC FALSE
|
||||||
|
//#define GQUEUE_NEED_FSYNC FALSE
|
||||||
|
//#define GQUEUE_NEED_BUFFERS FALSE
|
||||||
|
|
||||||
|
///////////////////////////////////////////////////////////////////////////
|
||||||
|
// GINPUT //
|
||||||
|
///////////////////////////////////////////////////////////////////////////
|
||||||
|
#define GFX_USE_GINPUT FALSE |
||||||
|
|
||||||
|
//#define GINPUT_NEED_MOUSE FALSE
|
||||||
|
// #define GINPUT_TOUCH_STARTRAW FALSE
|
||||||
|
// #define GINPUT_TOUCH_NOTOUCH FALSE
|
||||||
|
// #define GINPUT_TOUCH_NOCALIBRATE FALSE
|
||||||
|
// #define GINPUT_TOUCH_NOCALIBRATE_GUI FALSE
|
||||||
|
// #define GINPUT_MOUSE_POLL_PERIOD 25
|
||||||
|
// #define GINPUT_MOUSE_CLICK_TIME 300
|
||||||
|
// #define GINPUT_TOUCH_CXTCLICK_TIME 700
|
||||||
|
// #define GINPUT_TOUCH_USER_CALIBRATION_LOAD FALSE
|
||||||
|
// #define GINPUT_TOUCH_USER_CALIBRATION_SAVE FALSE
|
||||||
|
// #define GMOUSE_DRIVER_LIST GMOUSEVMT_Win32, GMOUSEVMT_Win32
|
||||||
|
//#define GINPUT_NEED_KEYBOARD FALSE
|
||||||
|
// #define GINPUT_KEYBOARD_POLL_PERIOD 200
|
||||||
|
// #define GKEYBOARD_DRIVER_LIST GKEYBOARDVMT_Win32, GKEYBOARDVMT_Win32
|
||||||
|
// #define GKEYBOARD_LAYOUT_OFF FALSE
|
||||||
|
// #define GKEYBOARD_LAYOUT_SCANCODE2_US FALSE
|
||||||
|
//#define GINPUT_NEED_TOGGLE FALSE
|
||||||
|
//#define GINPUT_NEED_DIAL FALSE
|
||||||
|
|
||||||
|
|
||||||
|
///////////////////////////////////////////////////////////////////////////
|
||||||
|
// GFILE //
|
||||||
|
///////////////////////////////////////////////////////////////////////////
|
||||||
|
#define GFX_USE_GFILE FALSE |
||||||
|
|
||||||
|
//#define GFILE_NEED_PRINTG FALSE
|
||||||
|
//#define GFILE_NEED_SCANG FALSE
|
||||||
|
//#define GFILE_NEED_STRINGS FALSE
|
||||||
|
//#define GFILE_NEED_FILELISTS FALSE
|
||||||
|
//#define GFILE_NEED_STDIO FALSE
|
||||||
|
//#define GFILE_NEED_NOAUTOMOUNT FALSE
|
||||||
|
//#define GFILE_NEED_NOAUTOSYNC FALSE
|
||||||
|
|
||||||
|
//#define GFILE_NEED_MEMFS FALSE
|
||||||
|
//#define GFILE_NEED_ROMFS FALSE
|
||||||
|
//#define GFILE_NEED_RAMFS FALSE
|
||||||
|
//#define GFILE_NEED_FATFS FALSE
|
||||||
|
//#define GFILE_NEED_NATIVEFS FALSE
|
||||||
|
//#define GFILE_NEED_CHBIOSFS FALSE
|
||||||
|
|
||||||
|
//#define GFILE_ALLOW_FLOATS FALSE
|
||||||
|
//#define GFILE_ALLOW_DEVICESPECIFIC FALSE
|
||||||
|
//#define GFILE_MAX_GFILES 3
|
||||||
|
|
||||||
|
///////////////////////////////////////////////////////////////////////////
|
||||||
|
// GADC //
|
||||||
|
///////////////////////////////////////////////////////////////////////////
|
||||||
|
#define GFX_USE_GADC FALSE |
||||||
|
|
||||||
|
//#define GADC_MAX_LOWSPEED_DEVICES 4
|
||||||
|
|
||||||
|
|
||||||
|
///////////////////////////////////////////////////////////////////////////
|
||||||
|
// GAUDIO //
|
||||||
|
///////////////////////////////////////////////////////////////////////////
|
||||||
|
#define GFX_USE_GAUDIO FALSE |
||||||
|
// There seems to be a bug in the ugfx code, the wrong define is used
|
||||||
|
// So define it in order to avoid warnings
|
||||||
|
#define GFX_USE_GAUDIN GFX_USE_GAUDIO |
||||||
|
// #define GAUDIO_NEED_PLAY FALSE
|
||||||
|
// #define GAUDIO_NEED_RECORD FALSE
|
||||||
|
|
||||||
|
|
||||||
|
///////////////////////////////////////////////////////////////////////////
|
||||||
|
// GMISC //
|
||||||
|
///////////////////////////////////////////////////////////////////////////
|
||||||
|
#define GFX_USE_GMISC TRUE |
||||||
|
|
||||||
|
//#define GMISC_NEED_ARRAYOPS FALSE
|
||||||
|
//#define GMISC_NEED_FASTTRIG FALSE
|
||||||
|
//#define GMISC_NEED_FIXEDTRIG FALSE
|
||||||
|
//#define GMISC_NEED_INVSQRT FALSE
|
||||||
|
// #define GMISC_INVSQRT_MIXED_ENDIAN FALSE
|
||||||
|
// #define GMISC_INVSQRT_REAL_SLOW FALSE
|
||||||
|
#define GMISC_NEED_MATRIXFLOAT2D TRUE |
||||||
|
#define GMISC_NEED_MATRIXFIXED2D FALSE |
||||||
|
|
||||||
|
#endif /* _GFXCONF_H */ |
||||||
@ -0,0 +1,168 @@ |
|||||||
|
/*
|
||||||
|
Copyright 2016 Fred Sundvik <fsundvik@gmail.com> |
||||||
|
|
||||||
|
This program is free software: you can redistribute it and/or modify |
||||||
|
it under the terms of the GNU General Public License as published by |
||||||
|
the Free Software Foundation, either version 2 of the License, or |
||||||
|
(at your option) any later version. |
||||||
|
|
||||||
|
This program is distributed in the hope that it will be useful, |
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||||
|
GNU General Public License for more details. |
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License |
||||||
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/ |
||||||
|
|
||||||
|
// Currently we are assuming that both the backlight and LCD are enabled
|
||||||
|
// But it's entirely possible to write a custom visualizer that use only
|
||||||
|
// one of them
|
||||||
|
#ifndef LCD_BACKLIGHT_ENABLE |
||||||
|
#error This visualizer needs that LCD backlight is enabled |
||||||
|
#endif |
||||||
|
|
||||||
|
#ifndef LCD_ENABLE |
||||||
|
#error This visualizer needs that LCD is enabled |
||||||
|
#endif |
||||||
|
|
||||||
|
#include "visualizer.h" |
||||||
|
#include "led_test.h" |
||||||
|
|
||||||
|
static const char* welcome_text[] = {"TMK", "Infinity Ergodox"}; |
||||||
|
|
||||||
|
// Just an example how to write custom keyframe functions, we could have moved
|
||||||
|
// all this into the init function
|
||||||
|
bool display_welcome(keyframe_animation_t* animation, visualizer_state_t* state) { |
||||||
|
(void)animation; |
||||||
|
// Read the uGFX documentation for information how to use the displays
|
||||||
|
// http://wiki.ugfx.org/index.php/Main_Page
|
||||||
|
gdispClear(White); |
||||||
|
// You can use static variables for things that can't be found in the animation
|
||||||
|
// or state structs
|
||||||
|
gdispDrawString(0, 3, welcome_text[0], state->font_dejavusansbold12, Black); |
||||||
|
gdispDrawString(0, 15, welcome_text[1], state->font_dejavusansbold12, Black); |
||||||
|
// Always remember to flush the display
|
||||||
|
gdispFlush(); |
||||||
|
// you could set the backlight color as well, but we won't do it here, since
|
||||||
|
// it's part of the following animation
|
||||||
|
// lcd_backlight_color(hue, saturation, intensity);
|
||||||
|
// We don't need constant updates, just drawing the screen once is enough
|
||||||
|
return false; |
||||||
|
} |
||||||
|
|
||||||
|
// Feel free to modify the animations below, or even add new ones if needed
|
||||||
|
|
||||||
|
// Don't worry, if the startup animation is long, you can use the keyboard like normal
|
||||||
|
// during that time
|
||||||
|
static keyframe_animation_t startup_animation = { |
||||||
|
.num_frames = 4, |
||||||
|
.loop = false, |
||||||
|
.frame_lengths = {0, gfxMillisecondsToTicks(1000), gfxMillisecondsToTicks(5000), 0}, |
||||||
|
.frame_functions = { |
||||||
|
display_welcome, |
||||||
|
keyframe_animate_backlight_color, |
||||||
|
keyframe_no_operation, |
||||||
|
enable_visualization |
||||||
|
}, |
||||||
|
}; |
||||||
|
|
||||||
|
// The color animation animates the LCD color when you change layers
|
||||||
|
static keyframe_animation_t color_animation = { |
||||||
|
.num_frames = 2, |
||||||
|
.loop = false, |
||||||
|
// Note that there's a 200 ms no-operation frame,
|
||||||
|
// this prevents the color from changing when activating the layer
|
||||||
|
// momentarily
|
||||||
|
.frame_lengths = {gfxMillisecondsToTicks(200), gfxMillisecondsToTicks(500)}, |
||||||
|
.frame_functions = {keyframe_no_operation, keyframe_animate_backlight_color}, |
||||||
|
}; |
||||||
|
|
||||||
|
// The LCD animation alternates between the layer name display and a
|
||||||
|
// bitmap that displays all active layers
|
||||||
|
static keyframe_animation_t lcd_animation = { |
||||||
|
.num_frames = 2, |
||||||
|
.loop = true, |
||||||
|
.frame_lengths = {gfxMillisecondsToTicks(2000), gfxMillisecondsToTicks(2000)}, |
||||||
|
.frame_functions = {keyframe_display_layer_text, keyframe_display_layer_bitmap}, |
||||||
|
}; |
||||||
|
|
||||||
|
static keyframe_animation_t suspend_animation = { |
||||||
|
.num_frames = 3, |
||||||
|
.loop = false, |
||||||
|
.frame_lengths = {0, gfxMillisecondsToTicks(1000), 0}, |
||||||
|
.frame_functions = { |
||||||
|
keyframe_display_layer_text, |
||||||
|
keyframe_animate_backlight_color, |
||||||
|
keyframe_disable_lcd_and_backlight, |
||||||
|
}, |
||||||
|
}; |
||||||
|
|
||||||
|
static keyframe_animation_t resume_animation = { |
||||||
|
.num_frames = 5, |
||||||
|
.loop = false, |
||||||
|
.frame_lengths = {0, 0, gfxMillisecondsToTicks(1000), gfxMillisecondsToTicks(5000), 0}, |
||||||
|
.frame_functions = { |
||||||
|
keyframe_enable_lcd_and_backlight, |
||||||
|
display_welcome, |
||||||
|
keyframe_animate_backlight_color, |
||||||
|
keyframe_no_operation, |
||||||
|
enable_visualization, |
||||||
|
}, |
||||||
|
}; |
||||||
|
|
||||||
|
void initialize_user_visualizer(visualizer_state_t* state) { |
||||||
|
// The brightness will be dynamically adjustable in the future
|
||||||
|
// But for now, change it here.
|
||||||
|
lcd_backlight_brightness(0x50); |
||||||
|
state->current_lcd_color = LCD_COLOR(0x00, 0x00, 0xFF); |
||||||
|
state->target_lcd_color = LCD_COLOR(0x10, 0xFF, 0xFF); |
||||||
|
start_keyframe_animation(&startup_animation); |
||||||
|
start_keyframe_animation(&led_test_animation); |
||||||
|
} |
||||||
|
|
||||||
|
void update_user_visualizer_state(visualizer_state_t* state) { |
||||||
|
// Add more tests, change the colors and layer texts here
|
||||||
|
// Usually you want to check the high bits (higher layers first)
|
||||||
|
// because that's the order layers are processed for keypresses
|
||||||
|
// You can for check for example:
|
||||||
|
// state->status.layer
|
||||||
|
// state->status.default_layer
|
||||||
|
// state->status.leds (see led.h for available statuses)
|
||||||
|
if (state->status.layer & 0x8) { |
||||||
|
state->target_lcd_color = LCD_COLOR(0xC0, 0xB0, 0xFF); |
||||||
|
state->layer_text = "Numpad"; |
||||||
|
} |
||||||
|
else if (state->status.layer & 0x4) { |
||||||
|
state->target_lcd_color = LCD_COLOR(0, 0xB0, 0xFF); |
||||||
|
state->layer_text = "KBD functions"; |
||||||
|
} |
||||||
|
else if (state->status.layer & 0x2) { |
||||||
|
state->target_lcd_color = LCD_COLOR(0x80, 0xB0, 0xFF); |
||||||
|
state->layer_text = "Function keys"; |
||||||
|
} |
||||||
|
else { |
||||||
|
state->target_lcd_color = LCD_COLOR(0x40, 0xB0, 0xFF); |
||||||
|
state->layer_text = "Default"; |
||||||
|
} |
||||||
|
// You can also stop existing animations, and start your custom ones here
|
||||||
|
// remember that you should normally have only one animation for the LCD
|
||||||
|
// and one for the background. But you can also combine them if you want.
|
||||||
|
start_keyframe_animation(&lcd_animation); |
||||||
|
start_keyframe_animation(&color_animation); |
||||||
|
} |
||||||
|
|
||||||
|
void user_visualizer_suspend(visualizer_state_t* state) { |
||||||
|
state->layer_text = "Suspending..."; |
||||||
|
uint8_t hue = LCD_HUE(state->current_lcd_color); |
||||||
|
uint8_t sat = LCD_SAT(state->current_lcd_color); |
||||||
|
state->target_lcd_color = LCD_COLOR(hue, sat, 0); |
||||||
|
start_keyframe_animation(&suspend_animation); |
||||||
|
} |
||||||
|
|
||||||
|
void user_visualizer_resume(visualizer_state_t* state) { |
||||||
|
state->current_lcd_color = LCD_COLOR(0x00, 0x00, 0x00); |
||||||
|
state->target_lcd_color = LCD_COLOR(0x10, 0xFF, 0xFF); |
||||||
|
start_keyframe_animation(&resume_animation); |
||||||
|
start_keyframe_animation(&led_test_animation); |
||||||
|
} |
||||||
@ -0,0 +1,116 @@ |
|||||||
|
#include "satan.h" |
||||||
|
|
||||||
|
// Used for SHIFT_ESC
|
||||||
|
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) |
||||||
|
|
||||||
|
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||||
|
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||||
|
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||||
|
// entirely and just use numbers.
|
||||||
|
#define _BL 0 |
||||||
|
#define _FL 1 |
||||||
|
#define _RL 2 |
||||||
|
|
||||||
|
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { |
||||||
|
/* Keymap _BL: (Base Layer) Default Layer
|
||||||
|
* ,-----------------------------------------------------------. |
||||||
|
* |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | |
||||||
|
* |-----------------------------------------------------------| |
||||||
|
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | |
||||||
|
* |-----------------------------------------------------------| |
||||||
|
* |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return | |
||||||
|
* |-----------------------------------------------------------| |
||||||
|
* |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | |
||||||
|
* |-----------------------------------------------------------| |
||||||
|
* |Ctrl|Gui |Alt | Space |Alt |Gui |FN |Ctrl | |
||||||
|
* `-----------------------------------------------------------' |
||||||
|
*/ |
||||||
|
[_BL] = KEYMAP( |
||||||
|
F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \
|
||||||
|
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \
|
||||||
|
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, \
|
||||||
|
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, \
|
||||||
|
KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, KC_RALT, MO(_RL), MO(_FL), KC_RCTL), |
||||||
|
|
||||||
|
/* Keymap _FL: Function Layer
|
||||||
|
* ,-----------------------------------------------------------. |
||||||
|
* | ~ | F1|F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12| DEL | |
||||||
|
* |-----------------------------------------------------------| |
||||||
|
* | | Up| | | | |Cal| |Ins| |PrSc|Sclk|Paus| | |
||||||
|
* |-----------------------------------------------------------| |
||||||
|
* | |Left|Down|Rig| | | | | | |Home|PgUp| | |
||||||
|
* |-----------------------------------------------------------| |
||||||
|
* | | |App| | | |Vdn|Vup|Mute|End|PgDn| | |
||||||
|
* |-----------------------------------------------------------| |
||||||
|
* | | | | | | | | | |
||||||
|
* `-----------------------------------------------------------' |
||||||
|
*/ |
||||||
|
[_FL] = KEYMAP( |
||||||
|
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \
|
||||||
|
KC_TRNS,KC_TRNS, KC_UP, KC_TRNS,KC_TRNS,KC_TRNS, KC_CALC,KC_TRNS,KC_INS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, \
|
||||||
|
KC_TRNS,KC_LEFT,KC_DOWN,KC_RGHT,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_TRNS, \
|
||||||
|
KC_TRNS, KC_TRNS, KC_APP, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_END, KC_PGDN, KC_TRNS, \
|
||||||
|
KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), |
||||||
|
|
||||||
|
/* Keymap _RL: Function Layer
|
||||||
|
* ,-----------------------------------------------------------. |
||||||
|
* | | | | | | | | | | | | | | RESET| |
||||||
|
* |-----------------------------------------------------------| |
||||||
|
* | | | | | | | | | | | |BL-|BL+|BL | |
||||||
|
* |-----------------------------------------------------------| |
||||||
|
* | | | | | | | | | | | | | |
||||||
|
* |-----------------------------------------------------------| |
||||||
|
* | | F1|F2 | F3|F4 | F5| F6| F7| F8| | | | |
||||||
|
* |-----------------------------------------------------------| |
||||||
|
* | | | | | | | | | |
||||||
|
* `-----------------------------------------------------------'
|
||||||
|
*/ |
||||||
|
[_RL] = KEYMAP( |
||||||
|
#ifdef RGBLIGHT_ENABLE |
||||||
|
KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, \
|
||||||
|
KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_INC, BL_TOGG, \
|
||||||
|
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||||
|
KC_TRNS, RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||||
|
KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), |
||||||
|
#else |
||||||
|
KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, \
|
||||||
|
KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_INC, BL_TOGG, \
|
||||||
|
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||||
|
KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), |
||||||
|
#endif |
||||||
|
}; |
||||||
|
|
||||||
|
enum function_id { |
||||||
|
SHIFT_ESC, |
||||||
|
}; |
||||||
|
|
||||||
|
const uint16_t PROGMEM fn_actions[] = { |
||||||
|
[0] = ACTION_FUNCTION(SHIFT_ESC), |
||||||
|
}; |
||||||
|
|
||||||
|
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { |
||||||
|
static uint8_t shift_esc_shift_mask; |
||||||
|
switch (id) { |
||||||
|
case SHIFT_ESC: |
||||||
|
shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; |
||||||
|
if (record->event.pressed) { |
||||||
|
if (shift_esc_shift_mask) { |
||||||
|
add_key(KC_GRV); |
||||||
|
send_keyboard_report(); |
||||||
|
} else { |
||||||
|
add_key(KC_ESC); |
||||||
|
send_keyboard_report(); |
||||||
|
} |
||||||
|
} else { |
||||||
|
if (shift_esc_shift_mask) { |
||||||
|
del_key(KC_GRV); |
||||||
|
send_keyboard_report(); |
||||||
|
} else { |
||||||
|
del_key(KC_ESC); |
||||||
|
send_keyboard_report(); |
||||||
|
} |
||||||
|
} |
||||||
|
break; |
||||||
|
} |
||||||
|
} |
||||||
@ -0,0 +1,20 @@ |
|||||||
|
#include "../../config.h" |
||||||
|
|
||||||
|
// USB Device descriptor parameter
|
||||||
|
#define VENDOR_ID 0xFEED |
||||||
|
#define PRODUCT_ID 0x6060 |
||||||
|
#define DEVICE_VER 0x0003 |
||||||
|
#define MANUFACTURER Custom |
||||||
|
#define PRODUCT GH60 rev.CHN |
||||||
|
#define DESCRIPTION QMK keyboard firmware for GH60 with WS2812 support |
||||||
|
|
||||||
|
// Backlight configuration
|
||||||
|
#define BACKLIGHT_LEVELS 3 |
||||||
|
|
||||||
|
// Underlight configuration
|
||||||
|
#define RGB_DI_PIN E2 |
||||||
|
#define RGBLIGHT_TIMER |
||||||
|
#define RGBLED_NUM 6 // Number of LEDs
|
||||||
|
#define RGBLIGHT_HUE_STEP 8 |
||||||
|
#define RGBLIGHT_SAT_STEP 8 |
||||||
|
#define RGBLIGHT_VAL_STEP 8 |
||||||
@ -0,0 +1,84 @@ |
|||||||
|
#include "satan.h" |
||||||
|
|
||||||
|
// Used for SHIFT_ESC
|
||||||
|
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) |
||||||
|
|
||||||
|
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||||
|
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||||
|
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||||
|
// entirely and just use numbers.
|
||||||
|
#define _BL 0 |
||||||
|
#define _FL 1 |
||||||
|
#define _RGBL 2 |
||||||
|
|
||||||
|
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { |
||||||
|
|
||||||
|
// See base_layer.png and rgb_layer.png for layout reference
|
||||||
|
|
||||||
|
// Base Default Layer
|
||||||
|
// Mac Modifier Layout. Use BootMagic to toggle GUI and ALT positions.
|
||||||
|
[_BL] = KEYMAP_HHKB( |
||||||
|
F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NO, \
|
||||||
|
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \
|
||||||
|
LT(_FL, KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
|
||||||
|
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_UP, MO(_FL), \
|
||||||
|
KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_LEFT, KC_DOWN, KC_RGHT), |
||||||
|
|
||||||
|
// Function layer
|
||||||
|
[_FL] = KEYMAP_HHKB( |
||||||
|
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_NO, \
|
||||||
|
KC_NO, KC_MPRV, KC_UP, KC_MNXT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_PSCR, KC_SLCK, KC_PAUS, KC_INS, \
|
||||||
|
KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \
|
||||||
|
KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, LT(_RGBL, KC_PGUP), KC_TRNS, \
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_TRNS, KC_HOME, KC_PGDN, KC_END), |
||||||
|
|
||||||
|
// RGB Layer
|
||||||
|
[_RGBL] = KEYMAP_HHKB( |
||||||
|
#ifdef RGBLIGHT_ENABLE |
||||||
|
RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \
|
||||||
|
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \
|
||||||
|
KC_NO, BL_TOGG, BL_STEP, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \
|
||||||
|
KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_NO, KC_NO, KC_TRNS, KC_TRNS,\
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), |
||||||
|
#else |
||||||
|
RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \
|
||||||
|
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \
|
||||||
|
KC_NO, BL_TOGG, BL_STEP, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \
|
||||||
|
KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, KC_TRNS,\
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), |
||||||
|
#endif |
||||||
|
}; |
||||||
|
|
||||||
|
enum function_id { |
||||||
|
SHIFT_ESC, |
||||||
|
}; |
||||||
|
|
||||||
|
const uint16_t PROGMEM fn_actions[] = { |
||||||
|
[0] = ACTION_FUNCTION(SHIFT_ESC), |
||||||
|
}; |
||||||
|
|
||||||
|
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { |
||||||
|
static uint8_t shift_esc_shift_mask; |
||||||
|
switch (id) { |
||||||
|
case SHIFT_ESC: |
||||||
|
shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; |
||||||
|
if (record->event.pressed) { |
||||||
|
if (shift_esc_shift_mask) { |
||||||
|
add_key(KC_GRV); |
||||||
|
send_keyboard_report(); |
||||||
|
} else { |
||||||
|
add_key(KC_ESC); |
||||||
|
send_keyboard_report(); |
||||||
|
} |
||||||
|
} else { |
||||||
|
if (shift_esc_shift_mask) { |
||||||
|
del_key(KC_GRV); |
||||||
|
send_keyboard_report(); |
||||||
|
} else { |
||||||
|
del_key(KC_ESC); |
||||||
|
send_keyboard_report(); |
||||||
|
} |
||||||
|
} |
||||||
|
break; |
||||||
|
} |
||||||
|
} |
||||||
@ -0,0 +1 @@ |
|||||||
|
Subproject commit 13e084ae6231857cd0d472c529f34be07d93c08b |
||||||
Loading…
Reference in new issue