Refactor `bootloader_jump()` implementations (#15450)
* Refactor `bootloader_jump()` implementations * Fix tests? * Rename `atmel-samba` to `md-boot`fix_template_bootmagic
Ryan
3 years ago
committed by
GitHub
parent
cffe143ca2
commit
6bc870d899
@ -1,5 +1,8 @@ |
|||||||
# MCU name
|
# MCU name
|
||||||
MCU = MK20DX256
|
MCU = MK20DX256
|
||||||
|
|
||||||
|
# Bootloader selection
|
||||||
|
BOOTLOADER = halfkay
|
||||||
|
|
||||||
# Enter lower-power sleep mode when on the ChibiOS idle thread
|
# Enter lower-power sleep mode when on the ChibiOS idle thread
|
||||||
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
|
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
|
||||||
|
|||||||
@ -1,293 +0,0 @@ |
|||||||
#include <stdint.h> |
|
||||||
#include <stdbool.h> |
|
||||||
#include <avr/io.h> |
|
||||||
#include <avr/eeprom.h> |
|
||||||
#include <avr/interrupt.h> |
|
||||||
#include <avr/wdt.h> |
|
||||||
#include <util/delay.h> |
|
||||||
#include "bootloader.h" |
|
||||||
#include <avr/boot.h> |
|
||||||
|
|
||||||
#ifdef PROTOCOL_LUFA |
|
||||||
# include <LUFA/Drivers/USB/USB.h> |
|
||||||
#endif |
|
||||||
|
|
||||||
/** \brief Bootloader Size in *bytes*
|
|
||||||
* |
|
||||||
* AVR Boot section size are defined by setting BOOTSZ fuse in fact. Consult with your MCU datasheet. |
|
||||||
* Note that 'Word'(2 bytes) size and address are used in datasheet while TMK uses 'Byte'. |
|
||||||
* |
|
||||||
* Size of Bootloaders in bytes: |
|
||||||
* Atmel DFU loader(ATmega32U4) 4096 |
|
||||||
* Atmel DFU loader(AT90USB128) 8192 |
|
||||||
* LUFA bootloader(ATmega32U4) 4096 |
|
||||||
* Arduino Caterina(ATmega32U4) 4096 |
|
||||||
* USBaspLoader(ATmega***) 2048 |
|
||||||
* Teensy halfKay(ATmega32U4) 512 |
|
||||||
* Teensy++ halfKay(AT90USB128) 1024 |
|
||||||
* |
|
||||||
* AVR Boot section is located at the end of Flash memory like the followings. |
|
||||||
* |
|
||||||
* byte Atmel/LUFA(ATMega32u4) byte Atmel(AT90SUB128) |
|
||||||
* 0x0000 +---------------+ 0x00000 +---------------+ |
|
||||||
* | | | | |
|
||||||
* | | | | |
|
||||||
* | Application | | Application | |
|
||||||
* | | | | |
|
||||||
* = = = = |
|
||||||
* | | 32KB-4KB | | 128KB-8KB |
|
||||||
* 0x7000 +---------------+ 0x1E000 +---------------+ |
|
||||||
* | Bootloader | 4KB | Bootloader | 8KB |
|
||||||
* 0x7FFF +---------------+ 0x1FFFF +---------------+ |
|
||||||
* |
|
||||||
* |
|
||||||
* byte Teensy(ATMega32u4) byte Teensy++(AT90SUB128) |
|
||||||
* 0x0000 +---------------+ 0x00000 +---------------+ |
|
||||||
* | | | | |
|
||||||
* | | | | |
|
||||||
* | Application | | Application | |
|
||||||
* | | | | |
|
||||||
* = = = = |
|
||||||
* | | 32KB-512B | | 128KB-1KB |
|
||||||
* 0x7E00 +---------------+ 0x1FC00 +---------------+ |
|
||||||
* | Bootloader | 512B | Bootloader | 1KB |
|
||||||
* 0x7FFF +---------------+ 0x1FFFF +---------------+ |
|
||||||
*/ |
|
||||||
#define FLASH_SIZE (FLASHEND + 1L) |
|
||||||
|
|
||||||
#if !defined(BOOTLOADER_SIZE) |
|
||||||
uint16_t bootloader_start; |
|
||||||
#endif |
|
||||||
|
|
||||||
// compatibility between ATMega8 and ATMega88
|
|
||||||
#if !defined(MCUCSR) |
|
||||||
# if defined(MCUSR) |
|
||||||
# define MCUCSR MCUSR |
|
||||||
# endif |
|
||||||
#endif |
|
||||||
|
|
||||||
/** \brief Entering the Bootloader via Software
|
|
||||||
* |
|
||||||
* http://www.fourwalledcubicle.com/files/LUFA/Doc/120730/html/_page__software_bootloader_start.html
|
|
||||||
*/ |
|
||||||
#define BOOTLOADER_RESET_KEY 0xB007B007 |
|
||||||
uint32_t reset_key __attribute__((section(".noinit,\"aw\",@nobits;"))); |
|
||||||
|
|
||||||
/** \brief initialize MCU status by watchdog reset
|
|
||||||
* |
|
||||||
* FIXME: needs doc |
|
||||||
*/ |
|
||||||
__attribute__((weak)) void bootloader_jump(void) { |
|
||||||
#if !defined(BOOTLOADER_SIZE) |
|
||||||
uint8_t high_fuse = boot_lock_fuse_bits_get(GET_HIGH_FUSE_BITS); |
|
||||||
|
|
||||||
if (high_fuse & ~(FUSE_BOOTSZ0 & FUSE_BOOTSZ1)) { |
|
||||||
bootloader_start = (FLASH_SIZE - 512) >> 1; |
|
||||||
} else if (high_fuse & ~(FUSE_BOOTSZ1)) { |
|
||||||
bootloader_start = (FLASH_SIZE - 1024) >> 1; |
|
||||||
} else if (high_fuse & ~(FUSE_BOOTSZ0)) { |
|
||||||
bootloader_start = (FLASH_SIZE - 2048) >> 1; |
|
||||||
} else { |
|
||||||
bootloader_start = (FLASH_SIZE - 4096) >> 1; |
|
||||||
} |
|
||||||
#endif |
|
||||||
|
|
||||||
// Something like this might work, but it compiled larger than the block above
|
|
||||||
// bootloader_start = FLASH_SIZE - (256 << (~high_fuse & 0b110 >> 1));
|
|
||||||
|
|
||||||
#if defined(BOOTLOADER_HALFKAY) |
|
||||||
// http://www.pjrc.com/teensy/jump_to_bootloader.html
|
|
||||||
cli(); |
|
||||||
// disable watchdog, if enabled (it's not)
|
|
||||||
// disable all peripherals
|
|
||||||
// a shutdown call might make sense here
|
|
||||||
UDCON = 1; |
|
||||||
USBCON = (1 << FRZCLK); // disable USB
|
|
||||||
UCSR1B = 0; |
|
||||||
_delay_ms(5); |
|
||||||
# if defined(__AVR_AT90USB162__) // Teensy 1.0
|
|
||||||
EIMSK = 0; |
|
||||||
PCICR = 0; |
|
||||||
SPCR = 0; |
|
||||||
ACSR = 0; |
|
||||||
EECR = 0; |
|
||||||
TIMSK0 = 0; |
|
||||||
TIMSK1 = 0; |
|
||||||
UCSR1B = 0; |
|
||||||
DDRB = 0; |
|
||||||
DDRC = 0; |
|
||||||
DDRD = 0; |
|
||||||
PORTB = 0; |
|
||||||
PORTC = 0; |
|
||||||
PORTD = 0; |
|
||||||
asm volatile("jmp 0x3E00"); |
|
||||||
# elif defined(__AVR_ATmega32U4__) // Teensy 2.0
|
|
||||||
EIMSK = 0; |
|
||||||
PCICR = 0; |
|
||||||
SPCR = 0; |
|
||||||
ACSR = 0; |
|
||||||
EECR = 0; |
|
||||||
ADCSRA = 0; |
|
||||||
TIMSK0 = 0; |
|
||||||
TIMSK1 = 0; |
|
||||||
TIMSK3 = 0; |
|
||||||
TIMSK4 = 0; |
|
||||||
UCSR1B = 0; |
|
||||||
TWCR = 0; |
|
||||||
DDRB = 0; |
|
||||||
DDRC = 0; |
|
||||||
DDRD = 0; |
|
||||||
DDRE = 0; |
|
||||||
DDRF = 0; |
|
||||||
TWCR = 0; |
|
||||||
PORTB = 0; |
|
||||||
PORTC = 0; |
|
||||||
PORTD = 0; |
|
||||||
PORTE = 0; |
|
||||||
PORTF = 0; |
|
||||||
asm volatile("jmp 0x7E00"); |
|
||||||
# elif defined(__AVR_AT90USB646__) // Teensy++ 1.0
|
|
||||||
EIMSK = 0; |
|
||||||
PCICR = 0; |
|
||||||
SPCR = 0; |
|
||||||
ACSR = 0; |
|
||||||
EECR = 0; |
|
||||||
ADCSRA = 0; |
|
||||||
TIMSK0 = 0; |
|
||||||
TIMSK1 = 0; |
|
||||||
TIMSK2 = 0; |
|
||||||
TIMSK3 = 0; |
|
||||||
UCSR1B = 0; |
|
||||||
TWCR = 0; |
|
||||||
DDRA = 0; |
|
||||||
DDRB = 0; |
|
||||||
DDRC = 0; |
|
||||||
DDRD = 0; |
|
||||||
DDRE = 0; |
|
||||||
DDRF = 0; |
|
||||||
PORTA = 0; |
|
||||||
PORTB = 0; |
|
||||||
PORTC = 0; |
|
||||||
PORTD = 0; |
|
||||||
PORTE = 0; |
|
||||||
PORTF = 0; |
|
||||||
asm volatile("jmp 0xFC00"); |
|
||||||
# elif defined(__AVR_AT90USB1286__) // Teensy++ 2.0
|
|
||||||
EIMSK = 0; |
|
||||||
PCICR = 0; |
|
||||||
SPCR = 0; |
|
||||||
ACSR = 0; |
|
||||||
EECR = 0; |
|
||||||
ADCSRA = 0; |
|
||||||
TIMSK0 = 0; |
|
||||||
TIMSK1 = 0; |
|
||||||
TIMSK2 = 0; |
|
||||||
TIMSK3 = 0; |
|
||||||
UCSR1B = 0; |
|
||||||
TWCR = 0; |
|
||||||
DDRA = 0; |
|
||||||
DDRB = 0; |
|
||||||
DDRC = 0; |
|
||||||
DDRD = 0; |
|
||||||
DDRE = 0; |
|
||||||
DDRF = 0; |
|
||||||
PORTA = 0; |
|
||||||
PORTB = 0; |
|
||||||
PORTC = 0; |
|
||||||
PORTD = 0; |
|
||||||
PORTE = 0; |
|
||||||
PORTF = 0; |
|
||||||
asm volatile("jmp 0x1FC00"); |
|
||||||
# endif |
|
||||||
|
|
||||||
#elif defined(BOOTLOADER_CATERINA) |
|
||||||
// this block may be optional
|
|
||||||
// TODO: figure it out
|
|
||||||
|
|
||||||
uint16_t *const bootKeyPtr = (uint16_t *)0x0800; |
|
||||||
|
|
||||||
// Value used by Caterina bootloader use to determine whether to run the
|
|
||||||
// sketch or the bootloader programmer.
|
|
||||||
uint16_t bootKey = 0x7777; |
|
||||||
|
|
||||||
*bootKeyPtr = bootKey; |
|
||||||
|
|
||||||
// setup watchdog timeout
|
|
||||||
wdt_enable(WDTO_60MS); |
|
||||||
|
|
||||||
while (1) { |
|
||||||
} // wait for watchdog timer to trigger
|
|
||||||
|
|
||||||
#elif defined(BOOTLOADER_USBASP) |
|
||||||
// Taken with permission of Stephan Baerwolf from https://github.com/tinyusbboard/API/blob/master/apipage.c
|
|
||||||
wdt_enable(WDTO_15MS); |
|
||||||
wdt_reset(); |
|
||||||
asm volatile("cli \n\t" |
|
||||||
"ldi r29 , %[ramendhi] \n\t" |
|
||||||
"ldi r28 , %[ramendlo] \n\t" |
|
||||||
# if (FLASHEND > 131071) |
|
||||||
"ldi r18 , %[bootaddrhi] \n\t" |
|
||||||
"st Y+, r18 \n\t" |
|
||||||
# endif |
|
||||||
"ldi r18 , %[bootaddrme] \n\t" |
|
||||||
"st Y+, r18 \n\t" |
|
||||||
"ldi r18 , %[bootaddrlo] \n\t" |
|
||||||
"st Y+, r18 \n\t" |
|
||||||
"out %[mcucsrio], __zero_reg__ \n\t" |
|
||||||
"bootloader_startup_loop%=: \n\t" |
|
||||||
"rjmp bootloader_startup_loop%= \n\t" |
|
||||||
: |
|
||||||
: [mcucsrio] "I"(_SFR_IO_ADDR(MCUCSR)), |
|
||||||
# if (FLASHEND > 131071) |
|
||||||
[ramendhi] "M"(((RAMEND - 2) >> 8) & 0xff), [ramendlo] "M"(((RAMEND - 2) >> 0) & 0xff), [bootaddrhi] "M"((((FLASH_SIZE - BOOTLOADER_SIZE) >> 1) >> 16) & 0xff), |
|
||||||
# else |
|
||||||
[ramendhi] "M"(((RAMEND - 1) >> 8) & 0xff), [ramendlo] "M"(((RAMEND - 1) >> 0) & 0xff), |
|
||||||
# endif |
|
||||||
[bootaddrme] "M"((((FLASH_SIZE - BOOTLOADER_SIZE) >> 1) >> 8) & 0xff), [bootaddrlo] "M"((((FLASH_SIZE - BOOTLOADER_SIZE) >> 1) >> 0) & 0xff)); |
|
||||||
|
|
||||||
#else // Assume remaining boards are DFU, even if the flag isn't set
|
|
||||||
|
|
||||||
# if !(defined(__AVR_ATmega32A__) || defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__) || defined(__AVR_ATtiny85__)) // no USB - maybe BOOTLOADER_BOOTLOADHID instead though?
|
|
||||||
UDCON = 1; |
|
||||||
USBCON = (1 << FRZCLK); // disable USB
|
|
||||||
UCSR1B = 0; |
|
||||||
_delay_ms(5); // 5 seems to work fine
|
|
||||||
# endif |
|
||||||
|
|
||||||
# ifdef BOOTLOADER_BOOTLOADHID |
|
||||||
// force bootloadHID to stay in bootloader mode, so that it waits
|
|
||||||
// for a new firmware to be flashed
|
|
||||||
eeprom_write_byte((uint8_t *)1, 0x00); |
|
||||||
# endif |
|
||||||
|
|
||||||
// watchdog reset
|
|
||||||
reset_key = BOOTLOADER_RESET_KEY; |
|
||||||
wdt_enable(WDTO_250MS); |
|
||||||
for (;;) |
|
||||||
; |
|
||||||
#endif |
|
||||||
} |
|
||||||
|
|
||||||
/* this runs before main() */ |
|
||||||
void bootloader_jump_after_watchdog_reset(void) __attribute__((used, naked, section(".init3"))); |
|
||||||
void bootloader_jump_after_watchdog_reset(void) { |
|
||||||
#ifndef BOOTLOADER_HALFKAY |
|
||||||
if ((MCUCSR & (1 << WDRF)) && reset_key == BOOTLOADER_RESET_KEY) { |
|
||||||
reset_key = 0; |
|
||||||
|
|
||||||
// My custom USBasploader requires this to come up.
|
|
||||||
MCUCSR = 0; |
|
||||||
|
|
||||||
// Seems like Teensy halfkay loader requires clearing WDRF and disabling watchdog.
|
|
||||||
MCUCSR &= ~(1 << WDRF); |
|
||||||
wdt_disable(); |
|
||||||
|
|
||||||
// This is compled into 'icall', address should be in word unit, not byte.
|
|
||||||
# ifdef BOOTLOADER_SIZE |
|
||||||
((void (*)(void))((FLASH_SIZE - BOOTLOADER_SIZE) >> 1))(); |
|
||||||
# else |
|
||||||
asm("ijmp" ::"z"(bootloader_start)); |
|
||||||
# endif |
|
||||||
} |
|
||||||
#endif |
|
||||||
} |
|
||||||
@ -0,0 +1,34 @@ |
|||||||
|
/* Copyright 2021 QMK
|
||||||
|
* |
||||||
|
* This program is free software: you can redistribute it and/or modify |
||||||
|
* it under the terms of the GNU General Public License as published by |
||||||
|
* the Free Software Foundation, either version 3 of the License, or |
||||||
|
* (at your option) any later version. |
||||||
|
* |
||||||
|
* This program is distributed in the hope that it will be useful, |
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||||
|
* GNU General Public License for more details. |
||||||
|
* |
||||||
|
* You should have received a copy of the GNU General Public License |
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/ |
||||||
|
|
||||||
|
#include "bootloader.h" |
||||||
|
|
||||||
|
#include <avr/eeprom.h> |
||||||
|
#include <avr/wdt.h> |
||||||
|
|
||||||
|
__attribute__((weak)) |
||||||
|
void bootloader_jump(void) { |
||||||
|
// force bootloadHID to stay in bootloader mode, so that it waits
|
||||||
|
// for a new firmware to be flashed
|
||||||
|
// NOTE: this byte is part of QMK's "magic number" - changing it causes the EEPROM to be re-initialized
|
||||||
|
// thus every time the device is flashed the EEPROM will be wiped
|
||||||
|
eeprom_write_byte((uint8_t *)1, 0x00); |
||||||
|
|
||||||
|
// watchdog reset
|
||||||
|
wdt_enable(WDTO_250MS); |
||||||
|
for (;;) |
||||||
|
; |
||||||
|
} |
||||||
@ -0,0 +1,39 @@ |
|||||||
|
/* Copyright 2021 QMK
|
||||||
|
* |
||||||
|
* This program is free software: you can redistribute it and/or modify |
||||||
|
* it under the terms of the GNU General Public License as published by |
||||||
|
* the Free Software Foundation, either version 3 of the License, or |
||||||
|
* (at your option) any later version. |
||||||
|
* |
||||||
|
* This program is distributed in the hope that it will be useful, |
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||||
|
* GNU General Public License for more details. |
||||||
|
* |
||||||
|
* You should have received a copy of the GNU General Public License |
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/ |
||||||
|
|
||||||
|
#include "bootloader.h" |
||||||
|
|
||||||
|
#include <avr/wdt.h> |
||||||
|
|
||||||
|
__attribute__((weak)) |
||||||
|
void bootloader_jump(void) { |
||||||
|
// this block may be optional
|
||||||
|
// TODO: figure it out
|
||||||
|
|
||||||
|
uint16_t *const bootKeyPtr = (uint16_t *)0x0800; |
||||||
|
|
||||||
|
// Value used by Caterina bootloader use to determine whether to run the
|
||||||
|
// sketch or the bootloader programmer.
|
||||||
|
uint16_t bootKey = 0x7777; |
||||||
|
|
||||||
|
*bootKeyPtr = bootKey; |
||||||
|
|
||||||
|
// setup watchdog timeout
|
||||||
|
wdt_enable(WDTO_60MS); |
||||||
|
|
||||||
|
// wait for watchdog timer to trigger
|
||||||
|
while (1) { } |
||||||
|
} |
||||||
@ -0,0 +1,53 @@ |
|||||||
|
/* Copyright 2021 QMK
|
||||||
|
* |
||||||
|
* This program is free software: you can redistribute it and/or modify |
||||||
|
* it under the terms of the GNU General Public License as published by |
||||||
|
* the Free Software Foundation, either version 3 of the License, or |
||||||
|
* (at your option) any later version. |
||||||
|
* |
||||||
|
* This program is distributed in the hope that it will be useful, |
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||||
|
* GNU General Public License for more details. |
||||||
|
* |
||||||
|
* You should have received a copy of the GNU General Public License |
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/ |
||||||
|
|
||||||
|
#include "bootloader.h" |
||||||
|
|
||||||
|
#include <avr/wdt.h> |
||||||
|
#include <util/delay.h> |
||||||
|
|
||||||
|
#define FLASH_SIZE (FLASHEND + 1L) |
||||||
|
|
||||||
|
/** \brief Entering the Bootloader via Software
|
||||||
|
* |
||||||
|
* http://www.fourwalledcubicle.com/files/LUFA/Doc/120730/html/_page__software_bootloader_start.html
|
||||||
|
*/ |
||||||
|
#define BOOTLOADER_RESET_KEY 0xB007B007 |
||||||
|
uint32_t reset_key __attribute__((section(".noinit,\"aw\",@nobits;"))); |
||||||
|
|
||||||
|
__attribute__((weak)) |
||||||
|
void bootloader_jump(void) { |
||||||
|
UDCON = 1; |
||||||
|
USBCON = (1 << FRZCLK); // disable USB
|
||||||
|
UCSR1B = 0; |
||||||
|
_delay_ms(5); // 5 seems to work fine
|
||||||
|
|
||||||
|
// watchdog reset
|
||||||
|
reset_key = BOOTLOADER_RESET_KEY; |
||||||
|
wdt_enable(WDTO_250MS); |
||||||
|
for (;;) |
||||||
|
; |
||||||
|
} |
||||||
|
|
||||||
|
/* this runs before main() */ |
||||||
|
void bootloader_jump_after_watchdog_reset(void) __attribute__((used, naked, section(".init3"))); |
||||||
|
void bootloader_jump_after_watchdog_reset(void) { |
||||||
|
if ((MCUSR & (1 << WDRF)) && reset_key == BOOTLOADER_RESET_KEY) { |
||||||
|
reset_key = 0; |
||||||
|
|
||||||
|
((void (*)(void))((FLASH_SIZE - BOOTLOADER_SIZE) >> 1))(); |
||||||
|
} |
||||||
|
} |
||||||
@ -0,0 +1,129 @@ |
|||||||
|
/* Copyright 2021 QMK
|
||||||
|
* |
||||||
|
* This program is free software: you can redistribute it and/or modify |
||||||
|
* it under the terms of the GNU General Public License as published by |
||||||
|
* the Free Software Foundation, either version 3 of the License, or |
||||||
|
* (at your option) any later version. |
||||||
|
* |
||||||
|
* This program is distributed in the hope that it will be useful, |
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||||
|
* GNU General Public License for more details. |
||||||
|
* |
||||||
|
* You should have received a copy of the GNU General Public License |
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/ |
||||||
|
|
||||||
|
#include "bootloader.h" |
||||||
|
|
||||||
|
#include <avr/interrupt.h> |
||||||
|
#include <util/delay.h> |
||||||
|
|
||||||
|
__attribute__((weak)) |
||||||
|
void bootloader_jump(void) { |
||||||
|
// http://www.pjrc.com/teensy/jump_to_bootloader.html
|
||||||
|
|
||||||
|
cli(); |
||||||
|
// disable watchdog, if enabled (it's not)
|
||||||
|
// disable all peripherals
|
||||||
|
// a shutdown call might make sense here
|
||||||
|
UDCON = 1; |
||||||
|
USBCON = (1 << FRZCLK); // disable USB
|
||||||
|
UCSR1B = 0; |
||||||
|
_delay_ms(5); |
||||||
|
|
||||||
|
#if defined(__AVR_AT90USB162__) // Teensy 1.0
|
||||||
|
EIMSK = 0; |
||||||
|
PCICR = 0; |
||||||
|
SPCR = 0; |
||||||
|
ACSR = 0; |
||||||
|
EECR = 0; |
||||||
|
TIMSK0 = 0; |
||||||
|
TIMSK1 = 0; |
||||||
|
UCSR1B = 0; |
||||||
|
DDRB = 0; |
||||||
|
DDRC = 0; |
||||||
|
DDRD = 0; |
||||||
|
PORTB = 0; |
||||||
|
PORTC = 0; |
||||||
|
PORTD = 0; |
||||||
|
asm volatile("jmp 0x3E00"); |
||||||
|
#elif defined(__AVR_ATmega32U4__) // Teensy 2.0
|
||||||
|
EIMSK = 0; |
||||||
|
PCICR = 0; |
||||||
|
SPCR = 0; |
||||||
|
ACSR = 0; |
||||||
|
EECR = 0; |
||||||
|
ADCSRA = 0; |
||||||
|
TIMSK0 = 0; |
||||||
|
TIMSK1 = 0; |
||||||
|
TIMSK3 = 0; |
||||||
|
TIMSK4 = 0; |
||||||
|
UCSR1B = 0; |
||||||
|
TWCR = 0; |
||||||
|
DDRB = 0; |
||||||
|
DDRC = 0; |
||||||
|
DDRD = 0; |
||||||
|
DDRE = 0; |
||||||
|
DDRF = 0; |
||||||
|
TWCR = 0; |
||||||
|
PORTB = 0; |
||||||
|
PORTC = 0; |
||||||
|
PORTD = 0; |
||||||
|
PORTE = 0; |
||||||
|
PORTF = 0; |
||||||
|
asm volatile("jmp 0x7E00"); |
||||||
|
#elif defined(__AVR_AT90USB646__) // Teensy++ 1.0
|
||||||
|
EIMSK = 0; |
||||||
|
PCICR = 0; |
||||||
|
SPCR = 0; |
||||||
|
ACSR = 0; |
||||||
|
EECR = 0; |
||||||
|
ADCSRA = 0; |
||||||
|
TIMSK0 = 0; |
||||||
|
TIMSK1 = 0; |
||||||
|
TIMSK2 = 0; |
||||||
|
TIMSK3 = 0; |
||||||
|
UCSR1B = 0; |
||||||
|
TWCR = 0; |
||||||
|
DDRA = 0; |
||||||
|
DDRB = 0; |
||||||
|
DDRC = 0; |
||||||
|
DDRD = 0; |
||||||
|
DDRE = 0; |
||||||
|
DDRF = 0; |
||||||
|
PORTA = 0; |
||||||
|
PORTB = 0; |
||||||
|
PORTC = 0; |
||||||
|
PORTD = 0; |
||||||
|
PORTE = 0; |
||||||
|
PORTF = 0; |
||||||
|
asm volatile("jmp 0xFC00"); |
||||||
|
#elif defined(__AVR_AT90USB1286__) // Teensy++ 2.0
|
||||||
|
EIMSK = 0; |
||||||
|
PCICR = 0; |
||||||
|
SPCR = 0; |
||||||
|
ACSR = 0; |
||||||
|
EECR = 0; |
||||||
|
ADCSRA = 0; |
||||||
|
TIMSK0 = 0; |
||||||
|
TIMSK1 = 0; |
||||||
|
TIMSK2 = 0; |
||||||
|
TIMSK3 = 0; |
||||||
|
UCSR1B = 0; |
||||||
|
TWCR = 0; |
||||||
|
DDRA = 0; |
||||||
|
DDRB = 0; |
||||||
|
DDRC = 0; |
||||||
|
DDRD = 0; |
||||||
|
DDRE = 0; |
||||||
|
DDRF = 0; |
||||||
|
PORTA = 0; |
||||||
|
PORTB = 0; |
||||||
|
PORTC = 0; |
||||||
|
PORTD = 0; |
||||||
|
PORTE = 0; |
||||||
|
PORTF = 0; |
||||||
|
asm volatile("jmp 0x1FC00"); |
||||||
|
#endif |
||||||
|
} |
||||||
@ -0,0 +1,20 @@ |
|||||||
|
/* Copyright 2021 QMK
|
||||||
|
* |
||||||
|
* This program is free software: you can redistribute it and/or modify |
||||||
|
* it under the terms of the GNU General Public License as published by |
||||||
|
* the Free Software Foundation, either version 3 of the License, or |
||||||
|
* (at your option) any later version. |
||||||
|
* |
||||||
|
* This program is distributed in the hope that it will be useful, |
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||||
|
* GNU General Public License for more details. |
||||||
|
* |
||||||
|
* You should have received a copy of the GNU General Public License |
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/ |
||||||
|
|
||||||
|
#include "bootloader.h" |
||||||
|
|
||||||
|
__attribute__((weak)) |
||||||
|
void bootloader_jump(void) { } |
||||||
@ -0,0 +1,57 @@ |
|||||||
|
/* Copyright 2021 QMK
|
||||||
|
* |
||||||
|
* This program is free software: you can redistribute it and/or modify |
||||||
|
* it under the terms of the GNU General Public License as published by |
||||||
|
* the Free Software Foundation, either version 3 of the License, or |
||||||
|
* (at your option) any later version. |
||||||
|
* |
||||||
|
* This program is distributed in the hope that it will be useful, |
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||||
|
* GNU General Public License for more details. |
||||||
|
* |
||||||
|
* You should have received a copy of the GNU General Public License |
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/ |
||||||
|
|
||||||
|
#include "bootloader.h" |
||||||
|
|
||||||
|
#include <avr/wdt.h> |
||||||
|
|
||||||
|
#define FLASH_SIZE (FLASHEND + 1L) |
||||||
|
|
||||||
|
#if !defined(MCUCSR) |
||||||
|
# if defined(MCUSR) |
||||||
|
# define MCUCSR MCUSR |
||||||
|
# endif |
||||||
|
#endif |
||||||
|
|
||||||
|
__attribute__((weak)) |
||||||
|
void bootloader_jump(void) { |
||||||
|
// Taken with permission of Stephan Baerwolf from https://github.com/tinyusbboard/API/blob/master/apipage.c
|
||||||
|
|
||||||
|
wdt_enable(WDTO_15MS); |
||||||
|
wdt_reset(); |
||||||
|
asm volatile("cli \n\t" |
||||||
|
"ldi r29 , %[ramendhi] \n\t" |
||||||
|
"ldi r28 , %[ramendlo] \n\t" |
||||||
|
#if (FLASHEND > 131071) |
||||||
|
"ldi r18 , %[bootaddrhi] \n\t" |
||||||
|
"st Y+, r18 \n\t" |
||||||
|
#endif |
||||||
|
"ldi r18 , %[bootaddrme] \n\t" |
||||||
|
"st Y+, r18 \n\t" |
||||||
|
"ldi r18 , %[bootaddrlo] \n\t" |
||||||
|
"st Y+, r18 \n\t" |
||||||
|
"out %[mcucsrio], __zero_reg__ \n\t" |
||||||
|
"bootloader_startup_loop%=: \n\t" |
||||||
|
"rjmp bootloader_startup_loop%= \n\t" |
||||||
|
: |
||||||
|
: [mcucsrio] "I"(_SFR_IO_ADDR(MCUCSR)), |
||||||
|
#if (FLASHEND > 131071) |
||||||
|
[ramendhi] "M"(((RAMEND - 2) >> 8) & 0xff), [ramendlo] "M"(((RAMEND - 2) >> 0) & 0xff), [bootaddrhi] "M"((((FLASH_SIZE - BOOTLOADER_SIZE) >> 1) >> 16) & 0xff), |
||||||
|
#else |
||||||
|
[ramendhi] "M"(((RAMEND - 1) >> 8) & 0xff), [ramendlo] "M"(((RAMEND - 1) >> 0) & 0xff), |
||||||
|
#endif |
||||||
|
[bootaddrme] "M"((((FLASH_SIZE - BOOTLOADER_SIZE) >> 1) >> 8) & 0xff), [bootaddrlo] "M"((((FLASH_SIZE - BOOTLOADER_SIZE) >> 1) >> 0) & 0xff)); |
||||||
|
} |
||||||
@ -1,145 +0,0 @@ |
|||||||
#include "bootloader.h" |
|
||||||
|
|
||||||
#include <ch.h> |
|
||||||
#include <hal.h> |
|
||||||
#include "wait.h" |
|
||||||
|
|
||||||
/* This code should be checked whether it runs correctly on platforms */ |
|
||||||
#define SYMVAL(sym) (uint32_t)(((uint8_t *)&(sym)) - ((uint8_t *)0)) |
|
||||||
#define BOOTLOADER_MAGIC 0xDEADBEEF |
|
||||||
#define MAGIC_ADDR (unsigned long *)(SYMVAL(__ram0_end__) - 4) |
|
||||||
|
|
||||||
#ifndef STM32_BOOTLOADER_DUAL_BANK |
|
||||||
# define STM32_BOOTLOADER_DUAL_BANK FALSE |
|
||||||
#endif |
|
||||||
|
|
||||||
#ifdef BOOTLOADER_TINYUF2 |
|
||||||
|
|
||||||
# define DBL_TAP_MAGIC 0xf01669ef // From tinyuf2's board_api.h
|
|
||||||
|
|
||||||
// defined by linker script
|
|
||||||
extern uint32_t _board_dfu_dbl_tap[]; |
|
||||||
# define DBL_TAP_REG _board_dfu_dbl_tap[0] |
|
||||||
|
|
||||||
void bootloader_jump(void) { |
|
||||||
DBL_TAP_REG = DBL_TAP_MAGIC; |
|
||||||
NVIC_SystemReset(); |
|
||||||
} |
|
||||||
|
|
||||||
void enter_bootloader_mode_if_requested(void) { /* not needed, no two-stage reset */ |
|
||||||
} |
|
||||||
|
|
||||||
#elif STM32_BOOTLOADER_DUAL_BANK |
|
||||||
|
|
||||||
// Need pin definitions
|
|
||||||
# include "config_common.h" |
|
||||||
|
|
||||||
# ifndef STM32_BOOTLOADER_DUAL_BANK_GPIO |
|
||||||
# error "No STM32_BOOTLOADER_DUAL_BANK_GPIO defined, don't know which pin to toggle" |
|
||||||
# endif |
|
||||||
|
|
||||||
# ifndef STM32_BOOTLOADER_DUAL_BANK_POLARITY |
|
||||||
# define STM32_BOOTLOADER_DUAL_BANK_POLARITY 0 |
|
||||||
# endif |
|
||||||
|
|
||||||
# ifndef STM32_BOOTLOADER_DUAL_BANK_DELAY |
|
||||||
# define STM32_BOOTLOADER_DUAL_BANK_DELAY 100000 |
|
||||||
# endif |
|
||||||
|
|
||||||
extern uint32_t __ram0_end__; |
|
||||||
|
|
||||||
__attribute__((weak)) void bootloader_jump(void) { |
|
||||||
// For STM32 MCUs with dual-bank flash, and we're incapable of jumping to the bootloader. The first valid flash
|
|
||||||
// bank is executed unconditionally after a reset, so it doesn't enter DFU unless BOOT0 is high. Instead, we do
|
|
||||||
// it with hardware...in this case, we pull a GPIO high/low depending on the configuration, connects 3.3V to
|
|
||||||
// BOOT0's RC charging circuit, lets it charge the capacitor, and issue a system reset. See the QMK discord
|
|
||||||
// #hardware channel pins for an example circuit.
|
|
||||||
palSetPadMode(PAL_PORT(STM32_BOOTLOADER_DUAL_BANK_GPIO), PAL_PAD(STM32_BOOTLOADER_DUAL_BANK_GPIO), PAL_MODE_OUTPUT_PUSHPULL); |
|
||||||
# if STM32_BOOTLOADER_DUAL_BANK_POLARITY |
|
||||||
palSetPad(PAL_PORT(STM32_BOOTLOADER_DUAL_BANK_GPIO), PAL_PAD(STM32_BOOTLOADER_DUAL_BANK_GPIO)); |
|
||||||
# else |
|
||||||
palClearPad(PAL_PORT(STM32_BOOTLOADER_DUAL_BANK_GPIO), PAL_PAD(STM32_BOOTLOADER_DUAL_BANK_GPIO)); |
|
||||||
# endif |
|
||||||
|
|
||||||
// Wait for a while for the capacitor to charge
|
|
||||||
wait_ms(100); |
|
||||||
|
|
||||||
// Issue a system reset to get the ROM bootloader to execute, with BOOT0 high
|
|
||||||
NVIC_SystemReset(); |
|
||||||
} |
|
||||||
|
|
||||||
void enter_bootloader_mode_if_requested(void) {} // not needed at all, but if anybody attempts to invoke it....
|
|
||||||
|
|
||||||
#elif defined(STM32_BOOTLOADER_ADDRESS) // STM32_BOOTLOADER_DUAL_BANK
|
|
||||||
|
|
||||||
extern uint32_t __ram0_end__; |
|
||||||
|
|
||||||
__attribute__((weak)) void bootloader_jump(void) { |
|
||||||
*MAGIC_ADDR = BOOTLOADER_MAGIC; // set magic flag => reset handler will jump into boot loader
|
|
||||||
NVIC_SystemReset(); |
|
||||||
} |
|
||||||
|
|
||||||
void enter_bootloader_mode_if_requested(void) { |
|
||||||
unsigned long *check = MAGIC_ADDR; |
|
||||||
if (*check == BOOTLOADER_MAGIC) { |
|
||||||
*check = 0; |
|
||||||
__set_CONTROL(0); |
|
||||||
__set_MSP(*(__IO uint32_t *)STM32_BOOTLOADER_ADDRESS); |
|
||||||
__enable_irq(); |
|
||||||
|
|
||||||
typedef void (*BootJump_t)(void); |
|
||||||
BootJump_t boot_jump = *(BootJump_t *)(STM32_BOOTLOADER_ADDRESS + 4); |
|
||||||
boot_jump(); |
|
||||||
while (1) |
|
||||||
; |
|
||||||
} |
|
||||||
} |
|
||||||
|
|
||||||
#elif defined(GD32VF103) |
|
||||||
|
|
||||||
# define DBGMCU_KEY_UNLOCK 0x4B5A6978 |
|
||||||
# define DBGMCU_CMD_RESET 0x1 |
|
||||||
|
|
||||||
__IO uint32_t *DBGMCU_KEY = (uint32_t *)DBGMCU_BASE + 0x0CU; |
|
||||||
__IO uint32_t *DBGMCU_CMD = (uint32_t *)DBGMCU_BASE + 0x08U; |
|
||||||
|
|
||||||
__attribute__((weak)) void bootloader_jump(void) { |
|
||||||
/* The MTIMER unit of the GD32VF103 doesn't have the MSFRST
|
|
||||||
* register to generate a software reset request. |
|
||||||
* BUT instead two undocumented registers in the debug peripheral |
|
||||||
* that allow issueing a software reset. WHO would need the MSFRST |
|
||||||
* register anyway? Source: |
|
||||||
* https://github.com/esmil/gd32vf103inator/blob/master/include/gd32vf103/dbg.h */
|
|
||||||
*DBGMCU_KEY = DBGMCU_KEY_UNLOCK; |
|
||||||
*DBGMCU_CMD = DBGMCU_CMD_RESET; |
|
||||||
} |
|
||||||
|
|
||||||
void enter_bootloader_mode_if_requested(void) { /* Jumping to bootloader is not possible from user code. */ |
|
||||||
} |
|
||||||
|
|
||||||
#elif defined(KL2x) || defined(K20x) || defined(MK66F18) || defined(MIMXRT1062) // STM32_BOOTLOADER_DUAL_BANK // STM32_BOOTLOADER_ADDRESS
|
|
||||||
/* Kinetis */ |
|
||||||
|
|
||||||
# if defined(BOOTLOADER_KIIBOHD) |
|
||||||
/* Kiibohd Bootloader (MCHCK and Infinity KB) */ |
|
||||||
# define SCB_AIRCR_VECTKEY_WRITEMAGIC 0x05FA0000 |
|
||||||
const uint8_t sys_reset_to_loader_magic[] = "\xff\x00\x7fRESET TO LOADER\x7f\x00\xff\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00"; |
|
||||||
__attribute__((weak)) void bootloader_jump(void) { |
|
||||||
void *volatile vbat = (void *)VBAT; |
|
||||||
__builtin_memcpy(vbat, (const void *)sys_reset_to_loader_magic, sizeof(sys_reset_to_loader_magic)); |
|
||||||
// request reset
|
|
||||||
SCB->AIRCR = SCB_AIRCR_VECTKEY_WRITEMAGIC | SCB_AIRCR_SYSRESETREQ_Msk; |
|
||||||
} |
|
||||||
|
|
||||||
# else /* defined(BOOTLOADER_KIIBOHD) */ |
|
||||||
/* Default for Kinetis - expecting an ARM Teensy */ |
|
||||||
# include "wait.h" |
|
||||||
__attribute__((weak)) void bootloader_jump(void) { |
|
||||||
wait_ms(100); |
|
||||||
__BKPT(0); |
|
||||||
} |
|
||||||
# endif /* defined(BOOTLOADER_KIIBOHD) */ |
|
||||||
|
|
||||||
#else /* neither STM32 nor KINETIS */ |
|
||||||
__attribute__((weak)) void bootloader_jump(void) {} |
|
||||||
#endif |
|
||||||
@ -0,0 +1,40 @@ |
|||||||
|
/* Copyright 2021 QMK
|
||||||
|
* |
||||||
|
* This program is free software: you can redistribute it and/or modify |
||||||
|
* it under the terms of the GNU General Public License as published by |
||||||
|
* the Free Software Foundation, either version 3 of the License, or |
||||||
|
* (at your option) any later version. |
||||||
|
* |
||||||
|
* This program is distributed in the hope that it will be useful, |
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||||
|
* GNU General Public License for more details. |
||||||
|
* |
||||||
|
* You should have received a copy of the GNU General Public License |
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/ |
||||||
|
|
||||||
|
#include "bootloader.h" |
||||||
|
|
||||||
|
#include <ch.h> |
||||||
|
|
||||||
|
#define DBGMCU_KEY_UNLOCK 0x4B5A6978 |
||||||
|
#define DBGMCU_CMD_RESET 0x1 |
||||||
|
|
||||||
|
__IO uint32_t *DBGMCU_KEY = (uint32_t *)DBGMCU_BASE + 0x0CU; |
||||||
|
__IO uint32_t *DBGMCU_CMD = (uint32_t *)DBGMCU_BASE + 0x08U; |
||||||
|
|
||||||
|
__attribute__((weak)) |
||||||
|
void bootloader_jump(void) { |
||||||
|
/* The MTIMER unit of the GD32VF103 doesn't have the MSFRST
|
||||||
|
* register to generate a software reset request. |
||||||
|
* BUT instead two undocumented registers in the debug peripheral |
||||||
|
* that allow issueing a software reset. WHO would need the MSFRST |
||||||
|
* register anyway? Source: |
||||||
|
* https://github.com/esmil/gd32vf103inator/blob/master/include/gd32vf103/dbg.h */
|
||||||
|
*DBGMCU_KEY = DBGMCU_KEY_UNLOCK; |
||||||
|
*DBGMCU_CMD = DBGMCU_CMD_RESET; |
||||||
|
} |
||||||
|
|
||||||
|
/* Jumping to bootloader is not possible from user code. */ |
||||||
|
void enter_bootloader_mode_if_requested(void) { } |
||||||
@ -0,0 +1,26 @@ |
|||||||
|
/* Copyright 2021 QMK
|
||||||
|
* |
||||||
|
* This program is free software: you can redistribute it and/or modify |
||||||
|
* it under the terms of the GNU General Public License as published by |
||||||
|
* the Free Software Foundation, either version 3 of the License, or |
||||||
|
* (at your option) any later version. |
||||||
|
* |
||||||
|
* This program is distributed in the hope that it will be useful, |
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||||
|
* GNU General Public License for more details. |
||||||
|
* |
||||||
|
* You should have received a copy of the GNU General Public License |
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/ |
||||||
|
|
||||||
|
#include "bootloader.h" |
||||||
|
|
||||||
|
#include <ch.h> |
||||||
|
#include "wait.h" |
||||||
|
|
||||||
|
__attribute__((weak)) |
||||||
|
void bootloader_jump(void) { |
||||||
|
wait_ms(100); |
||||||
|
__BKPT(0); |
||||||
|
} |
||||||
@ -0,0 +1,33 @@ |
|||||||
|
/* Copyright 2021 QMK
|
||||||
|
* |
||||||
|
* This program is free software: you can redistribute it and/or modify |
||||||
|
* it under the terms of the GNU General Public License as published by |
||||||
|
* the Free Software Foundation, either version 3 of the License, or |
||||||
|
* (at your option) any later version. |
||||||
|
* |
||||||
|
* This program is distributed in the hope that it will be useful, |
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||||
|
* GNU General Public License for more details. |
||||||
|
* |
||||||
|
* You should have received a copy of the GNU General Public License |
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/ |
||||||
|
|
||||||
|
#include "bootloader.h" |
||||||
|
|
||||||
|
#include <ch.h> |
||||||
|
|
||||||
|
/* Kiibohd Bootloader (MCHCK and Infinity KB) */ |
||||||
|
#define SCB_AIRCR_VECTKEY_WRITEMAGIC 0x05FA0000 |
||||||
|
|
||||||
|
const uint8_t sys_reset_to_loader_magic[] = "\xff\x00\x7fRESET TO LOADER\x7f\x00\xff\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00"; |
||||||
|
|
||||||
|
__attribute__((weak)) |
||||||
|
void bootloader_jump(void) { |
||||||
|
void *volatile vbat = (void *)VBAT; |
||||||
|
__builtin_memcpy(vbat, (const void *)sys_reset_to_loader_magic, sizeof(sys_reset_to_loader_magic)); |
||||||
|
|
||||||
|
// request reset
|
||||||
|
SCB->AIRCR = SCB_AIRCR_VECTKEY_WRITEMAGIC | SCB_AIRCR_SYSRESETREQ_Msk; |
||||||
|
} |
||||||
@ -0,0 +1,20 @@ |
|||||||
|
/* Copyright 2021 QMK
|
||||||
|
* |
||||||
|
* This program is free software: you can redistribute it and/or modify |
||||||
|
* it under the terms of the GNU General Public License as published by |
||||||
|
* the Free Software Foundation, either version 3 of the License, or |
||||||
|
* (at your option) any later version. |
||||||
|
* |
||||||
|
* This program is distributed in the hope that it will be useful, |
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||||
|
* GNU General Public License for more details. |
||||||
|
* |
||||||
|
* You should have received a copy of the GNU General Public License |
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/ |
||||||
|
|
||||||
|
#include "bootloader.h" |
||||||
|
|
||||||
|
__attribute__((weak)) |
||||||
|
void bootloader_jump(void) { } |
||||||
@ -0,0 +1,96 @@ |
|||||||
|
/* Copyright 2021 QMK
|
||||||
|
* |
||||||
|
* This program is free software: you can redistribute it and/or modify |
||||||
|
* it under the terms of the GNU General Public License as published by |
||||||
|
* the Free Software Foundation, either version 3 of the License, or |
||||||
|
* (at your option) any later version. |
||||||
|
* |
||||||
|
* This program is distributed in the hope that it will be useful, |
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||||
|
* GNU General Public License for more details. |
||||||
|
* |
||||||
|
* You should have received a copy of the GNU General Public License |
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/ |
||||||
|
|
||||||
|
#include "bootloader.h" |
||||||
|
|
||||||
|
#include <ch.h> |
||||||
|
#include <hal.h> |
||||||
|
#include "wait.h" |
||||||
|
|
||||||
|
extern uint32_t __ram0_end__; |
||||||
|
|
||||||
|
#ifndef STM32_BOOTLOADER_DUAL_BANK |
||||||
|
# define STM32_BOOTLOADER_DUAL_BANK FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
#if STM32_BOOTLOADER_DUAL_BANK |
||||||
|
# include "config_common.h" |
||||||
|
|
||||||
|
# ifndef STM32_BOOTLOADER_DUAL_BANK_GPIO |
||||||
|
# error "No STM32_BOOTLOADER_DUAL_BANK_GPIO defined, don't know which pin to toggle" |
||||||
|
# endif |
||||||
|
|
||||||
|
# ifndef STM32_BOOTLOADER_DUAL_BANK_POLARITY |
||||||
|
# define STM32_BOOTLOADER_DUAL_BANK_POLARITY 0 |
||||||
|
# endif |
||||||
|
|
||||||
|
# ifndef STM32_BOOTLOADER_DUAL_BANK_DELAY |
||||||
|
# define STM32_BOOTLOADER_DUAL_BANK_DELAY 100000 |
||||||
|
# endif |
||||||
|
|
||||||
|
__attribute__((weak)) |
||||||
|
void bootloader_jump(void) { |
||||||
|
// For STM32 MCUs with dual-bank flash, and we're incapable of jumping to the bootloader. The first valid flash
|
||||||
|
// bank is executed unconditionally after a reset, so it doesn't enter DFU unless BOOT0 is high. Instead, we do
|
||||||
|
// it with hardware...in this case, we pull a GPIO high/low depending on the configuration, connects 3.3V to
|
||||||
|
// BOOT0's RC charging circuit, lets it charge the capacitor, and issue a system reset. See the QMK discord
|
||||||
|
// #hardware channel pins for an example circuit.
|
||||||
|
palSetPadMode(PAL_PORT(STM32_BOOTLOADER_DUAL_BANK_GPIO), PAL_PAD(STM32_BOOTLOADER_DUAL_BANK_GPIO), PAL_MODE_OUTPUT_PUSHPULL); |
||||||
|
# if STM32_BOOTLOADER_DUAL_BANK_POLARITY |
||||||
|
palSetPad(PAL_PORT(STM32_BOOTLOADER_DUAL_BANK_GPIO), PAL_PAD(STM32_BOOTLOADER_DUAL_BANK_GPIO)); |
||||||
|
# else |
||||||
|
palClearPad(PAL_PORT(STM32_BOOTLOADER_DUAL_BANK_GPIO), PAL_PAD(STM32_BOOTLOADER_DUAL_BANK_GPIO)); |
||||||
|
# endif |
||||||
|
|
||||||
|
// Wait for a while for the capacitor to charge
|
||||||
|
wait_ms(100); |
||||||
|
|
||||||
|
// Issue a system reset to get the ROM bootloader to execute, with BOOT0 high
|
||||||
|
NVIC_SystemReset(); |
||||||
|
} |
||||||
|
|
||||||
|
// not needed at all, but if anybody attempts to invoke it....
|
||||||
|
void enter_bootloader_mode_if_requested(void) { } |
||||||
|
|
||||||
|
#else |
||||||
|
|
||||||
|
/* This code should be checked whether it runs correctly on platforms */ |
||||||
|
#define SYMVAL(sym) (uint32_t)(((uint8_t *)&(sym)) - ((uint8_t *)0)) |
||||||
|
#define BOOTLOADER_MAGIC 0xDEADBEEF |
||||||
|
#define MAGIC_ADDR (unsigned long *)(SYMVAL(__ram0_end__) - 4) |
||||||
|
|
||||||
|
__attribute__((weak)) |
||||||
|
void bootloader_jump(void) { |
||||||
|
*MAGIC_ADDR = BOOTLOADER_MAGIC; // set magic flag => reset handler will jump into boot loader
|
||||||
|
NVIC_SystemReset(); |
||||||
|
} |
||||||
|
|
||||||
|
void enter_bootloader_mode_if_requested(void) { |
||||||
|
unsigned long *check = MAGIC_ADDR; |
||||||
|
if (*check == BOOTLOADER_MAGIC) { |
||||||
|
*check = 0; |
||||||
|
__set_CONTROL(0); |
||||||
|
__set_MSP(*(__IO uint32_t *)STM32_BOOTLOADER_ADDRESS); |
||||||
|
__enable_irq(); |
||||||
|
|
||||||
|
typedef void (*BootJump_t)(void); |
||||||
|
BootJump_t boot_jump = *(BootJump_t *)(STM32_BOOTLOADER_ADDRESS + 4); |
||||||
|
boot_jump(); |
||||||
|
while (1) |
||||||
|
; |
||||||
|
} |
||||||
|
} |
||||||
|
#endif |
||||||
@ -0,0 +1,24 @@ |
|||||||
|
/* Copyright 2021 QMK
|
||||||
|
* |
||||||
|
* This program is free software: you can redistribute it and/or modify |
||||||
|
* it under the terms of the GNU General Public License as published by |
||||||
|
* the Free Software Foundation, either version 3 of the License, or |
||||||
|
* (at your option) any later version. |
||||||
|
* |
||||||
|
* This program is distributed in the hope that it will be useful, |
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||||
|
* GNU General Public License for more details. |
||||||
|
* |
||||||
|
* You should have received a copy of the GNU General Public License |
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/ |
||||||
|
|
||||||
|
#include "bootloader.h" |
||||||
|
|
||||||
|
#include <ch.h> |
||||||
|
|
||||||
|
__attribute__((weak)) |
||||||
|
void bootloader_jump(void) { |
||||||
|
NVIC_SystemReset(); |
||||||
|
} |
||||||
@ -0,0 +1,35 @@ |
|||||||
|
/* Copyright 2021 QMK
|
||||||
|
* |
||||||
|
* This program is free software: you can redistribute it and/or modify |
||||||
|
* it under the terms of the GNU General Public License as published by |
||||||
|
* the Free Software Foundation, either version 3 of the License, or |
||||||
|
* (at your option) any later version. |
||||||
|
* |
||||||
|
* This program is distributed in the hope that it will be useful, |
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||||
|
* GNU General Public License for more details. |
||||||
|
* |
||||||
|
* You should have received a copy of the GNU General Public License |
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/ |
||||||
|
|
||||||
|
#include "bootloader.h" |
||||||
|
|
||||||
|
#include <ch.h> |
||||||
|
|
||||||
|
// From tinyuf2's board_api.h
|
||||||
|
#define DBL_TAP_MAGIC 0xF01669EF |
||||||
|
|
||||||
|
// defined by linker script
|
||||||
|
extern uint32_t _board_dfu_dbl_tap[]; |
||||||
|
#define DBL_TAP_REG _board_dfu_dbl_tap[0] |
||||||
|
|
||||||
|
__attribute__((weak)) |
||||||
|
void bootloader_jump(void) { |
||||||
|
DBL_TAP_REG = DBL_TAP_MAGIC; |
||||||
|
NVIC_SystemReset(); |
||||||
|
} |
||||||
|
|
||||||
|
/* not needed, no two-stage reset */ |
||||||
|
void enter_bootloader_mode_if_requested(void) { } |
||||||
@ -1,24 +0,0 @@ |
|||||||
#ifndef _MD_BOOTLOADER_H_ |
|
||||||
#define _MD_BOOTLOADER_H_ |
|
||||||
|
|
||||||
extern uint32_t _srom; |
|
||||||
extern uint32_t _lrom; |
|
||||||
extern uint32_t _erom; |
|
||||||
|
|
||||||
#define BOOTLOADER_SERIAL_MAX_SIZE 20 // DO NOT MODIFY!
|
|
||||||
|
|
||||||
#ifdef KEYBOARD_massdrop_ctrl |
|
||||||
// WARNING: These are only for CTRL bootloader release "v2.18Jun 22 2018 17:28:08" for bootloader_jump support
|
|
||||||
extern uint32_t _eram; |
|
||||||
# define BOOTLOADER_MAGIC 0x3B9ACA00 |
|
||||||
# define MAGIC_ADDR (uint32_t *)((intptr_t)(&_eram) - 4) |
|
||||||
#endif |
|
||||||
|
|
||||||
#ifdef MD_BOOTLOADER |
|
||||||
|
|
||||||
# define MCU_HZ 48000000 |
|
||||||
# define I2C_HZ 0 // Not used
|
|
||||||
|
|
||||||
#endif // MD_BOOTLOADER
|
|
||||||
|
|
||||||
#endif //_MD_BOOTLOADER_H_
|
|
||||||
Loading…
Reference in new issue