hailey
/
qmk_firmware
mirror of https://github.com/hailey/qmk_firmware.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Add open-drain GPIO support. (#15282)

Browse Source 
* Add open-drain GPIO support.

* `qmk format-c`

* Wording.

* Remove port GPIO implementations as the only board that uses it has its own internal defs anyway. Will wait for first-class handling of ports in core before reimplementing.
fix_template_bootmagic
Nick Brassel 3 years ago committed by GitHub
parent f491e6b138
commit 6e40dfa022
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
4 changed files with 30 additions and 47 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 6
      docs/internals_gpio_control.md
  2. 12
      platforms/arm_atsam/gpio.h
  3. 17
      platforms/avr/gpio.h
  4. 24
      platforms/chibios/gpio.h

6
docs/internals_gpio_control.md
Unescape View File

@ -7,11 +7,13 @@ QMK has a GPIO control abstraction layer which is microcontroller agnostic. This
The following functions provide basic control of GPIOs and are found in `platforms/<platform>/gpio.h`.
| Function | Description | Old AVR Examples | Old ChibiOS/ARM Examples |
|------------------------|--------------------------------------------------|-------------------------------------------------|-------------------------------------------------|
|------------------------------|-----------------------------------------------------|-------------------------------------------------|--------------------------------------------------|
| `setPinInput(pin)` | Set pin as input with high impedance (High-Z) | `DDRB &= ~(1<<2)` | `palSetLineMode(pin, PAL_MODE_INPUT)` |
| `setPinInputHigh(pin)` | Set pin as input with builtin pull-up resistor | `DDRB &= ~(1<<2); PORTB \|= (1<<2)` | `palSetLineMode(pin, PAL_MODE_INPUT_PULLUP)` |
| `setPinInputLow(pin)` | Set pin as input with builtin pull-down resistor | N/A (Not supported on AVR) | `palSetLineMode(pin, PAL_MODE_INPUT_PULLDOWN)` |
| `setPinOutput(pin)` | Set pin as output | `DDRB \|= (1<<2)` | `palSetLineMode(pin, PAL_MODE_OUTPUT_PUSHPULL)` |
| `setPinOutput(pin)` | Set pin as output (alias of `setPinOutputPushPull`) | `DDRB \|= (1<<2)` | `palSetLineMode(pin, PAL_MODE_OUTPUT_PUSHPULL)` |
| `setPinOutputPushPull(pin)` | Set pin as output, push/pull mode | `DDRB \|= (1<<2)` | `palSetLineMode(pin, PAL_MODE_OUTPUT_PUSHPULL)` |
| `setPinOutputOpenDrain(pin)` | Set pin as output, open-drain mode | N/A (Not implemented on AVR) | `palSetLineMode(pin, PAL_MODE_OUTPUT_OPENDRAIN)` |
| `writePinHigh(pin)` | Set pin level as high, assuming it is an output | `PORTB \|= (1<<2)` | `palSetLine(pin)` |
| `writePinLow(pin)` | Set pin level as low, assuming it is an output | `PORTB &= ~(1<<2)` | `palClearLine(pin)` |
| `writePin(pin, level)` | Set pin level, assuming it is an output | `(level) ? PORTB \|= (1<<2) : PORTB &= ~(1<<2)` | `(level) ? palSetLine(pin) : palClearLine(pin)` |

12
platforms/arm_atsam/gpio.h
Unescape View File

@ -22,9 +22,9 @@
typedef uint8_t pin_t;
#define SAMD_PORT(pin) ((pin & 0x20) >> 5)
#define SAMD_PIN(pin) (pin & 0x1f)
#define SAMD_PIN_MASK(pin) (1 << (pin & 0x1f))
#define SAMD_PORT(pin) (((pin)&0x20) >> 5)
#define SAMD_PIN(pin) ((pin)&0x1f)
#define SAMD_PIN_MASK(pin) (1 << ((pin)&0x1f))
#define setPinInput(pin) \
do { \
@ -48,12 +48,16 @@ typedef uint8_t pin_t;
PORT->Group[SAMD_PORT(pin)].PINCFG[SAMD_PIN(pin)].bit.PULLEN = 1; \
} while (0)
#define setPinOutput(pin) \
#define setPinOutputPushPull(pin) \
do { \
PORT->Group[SAMD_PORT(pin)].DIRSET.reg = SAMD_PIN_MASK(pin); \
PORT->Group[SAMD_PORT(pin)].OUTCLR.reg = SAMD_PIN_MASK(pin); \
} while (0)
#define setPinOutputOpenDrain(pin) _Static_assert(0, "arm_atsam platform does not implement an open-drain output")
#define setPinOutput(pin) setPinOutputPushPull(pin)
#define writePinHigh(pin) \
do { \
PORT->Group[SAMD_PORT(pin)].OUTSET.reg = SAMD_PIN_MASK(pin); \

17
platforms/avr/gpio.h
Unescape View File

@ -25,7 +25,9 @@ typedef uint8_t pin_t;
#define setPinInput(pin) (DDRx_ADDRESS(pin) &= ~_BV((pin)&0xF), PORTx_ADDRESS(pin) &= ~_BV((pin)&0xF))
#define setPinInputHigh(pin) (DDRx_ADDRESS(pin) &= ~_BV((pin)&0xF), PORTx_ADDRESS(pin) |= _BV((pin)&0xF))
#define setPinInputLow(pin) _Static_assert(0, "AVR processors cannot implement an input as pull low")
#define setPinOutput(pin) (DDRx_ADDRESS(pin) |= _BV((pin)&0xF))
#define setPinOutputPushPull(pin) (DDRx_ADDRESS(pin) |= _BV((pin)&0xF))
#define setPinOutputOpenDrain(pin) _Static_assert(0, "AVR platform does not implement an open-drain output")
#define setPinOutput(pin) setPinOutputPushPull(pin)
#define writePinHigh(pin) (PORTx_ADDRESS(pin) |= _BV((pin)&0xF))
#define writePinLow(pin) (PORTx_ADDRESS(pin) &= ~_BV((pin)&0xF))
@ -34,16 +36,3 @@ typedef uint8_t pin_t;
#define readPin(pin) ((bool)(PINx_ADDRESS(pin) & _BV((pin)&0xF)))
#define togglePin(pin) (PORTx_ADDRESS(pin) ^= _BV((pin)&0xF))
/* Operation of GPIO by port. */
typedef uint8_t port_data_t;
#define readPort(port) PINx_ADDRESS(port)
#define setPortBitInput(port, bit) (DDRx_ADDRESS(port) &= ~_BV((bit)&0xF), PORTx_ADDRESS(port) &= ~_BV((bit)&0xF))
#define setPortBitInputHigh(port, bit) (DDRx_ADDRESS(port) &= ~_BV((bit)&0xF), PORTx_ADDRESS(port) |= _BV((bit)&0xF))
#define setPortBitOutput(port, bit) (DDRx_ADDRESS(port) |= _BV((bit)&0xF))
#define writePortBitLow(port, bit) (PORTx_ADDRESS(port) &= ~_BV((bit)&0xF))
#define writePortBitHigh(port, bit) (PORTx_ADDRESS(port) |= _BV((bit)&0xF))

24
platforms/chibios/gpio.h
Unescape View File

@ -22,10 +22,12 @@ typedef ioline_t pin_t;
/* Operation of GPIO by pin. */
#define setPinInput(pin) palSetLineMode(pin, PAL_MODE_INPUT)
#define setPinInputHigh(pin) palSetLineMode(pin, PAL_MODE_INPUT_PULLUP)
#define setPinInputLow(pin) palSetLineMode(pin, PAL_MODE_INPUT_PULLDOWN)
#define setPinOutput(pin) palSetLineMode(pin, PAL_MODE_OUTPUT_PUSHPULL)
#define setPinInput(pin) palSetLineMode((pin), PAL_MODE_INPUT)
#define setPinInputHigh(pin) palSetLineMode((pin), PAL_MODE_INPUT_PULLUP)
#define setPinInputLow(pin) palSetLineMode((pin), PAL_MODE_INPUT_PULLDOWN)
#define setPinOutputPushPull(pin) palSetLineMode((pin), PAL_MODE_OUTPUT_PUSHPULL)
#define setPinOutputOpenDrain(pin) palSetLineMode((pin), PAL_MODE_OUTPUT_OPENDRAIN)
#define setPinOutput(pin) setPinOutputPushPull(pin)
#define writePinHigh(pin) palSetLine(pin)
#define writePinLow(pin) palClearLine(pin)
@ -34,17 +36,3 @@ typedef ioline_t pin_t;
#define readPin(pin) palReadLine(pin)
#define togglePin(pin) palToggleLine(pin)
/* Operation of GPIO by port. */
typedef uint16_t port_data_t;
#define readPort(pin) palReadPort(PAL_PORT(pin))
#define setPortBitInput(pin, bit) palSetPadMode(PAL_PORT(pin), bit, PAL_MODE_INPUT)
#define setPortBitInputHigh(pin, bit) palSetPadMode(PAL_PORT(pin), bit, PAL_MODE_INPUT_PULLUP)
#define setPortBitInputLow(pin, bit) palSetPadMode(PAL_PORT(pin), bit, PAL_MODE_INPUT_PULLDOWN)
#define setPortBitOutput(pin, bit) palSetPadMode(PAL_PORT(pin), bit, PAL_MODE_OUTPUT_PUSHPULL)
#define writePortBitLow(pin, bit) palClearLine(PAL_LINE(PAL_PORT(pin), bit))
#define writePortBitHigh(pin, bit) palSetLine(PAL_LINE(PAL_PORT(pin), bit))

Write Preview
Loading…
Cancel
Save