hailey
/
qmk_firmware
mirror of https://github.com/hailey/qmk_firmware.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Prune out pure software pwm && custom driver && remove wrapping BACKLIGHT_PIN (#8041)

Browse Source
make_cli_parsing 0.8.11
Joel Challis 5 years ago committed by GitHub
parent 3dc061ac78
commit 88356c85c4
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 241 additions and 284 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 525
      quantum/backlight/backlight_avr.c

525
quantum/backlight/backlight_avr.c
Unescape View File

@ -2,7 +2,9 @@
#include "backlight.h" #include "backlight.h"
#include "debug.h" #include "debug.h"
#if defined(BACKLIGHT_ENABLE) && (defined(BACKLIGHT_PIN) || defined(BACKLIGHT_PINS)) #if !defined(BACKLIGHT_PIN) && !defined(BACKLIGHT_PINS)
# error "Backlight pin/pins not defined. Please configure."
#endif
// This logic is a bit complex, we support 3 setups: // This logic is a bit complex, we support 3 setups:
// //
@ -12,262 +14,223 @@
// depends on the Audio setup (Audio wins over Backlight). // depends on the Audio setup (Audio wins over Backlight).
// 3. Full software PWM, driven by the matrix scan, if both timers are used by Audio. // 3. Full software PWM, driven by the matrix scan, if both timers are used by Audio.
# if (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__)) && (BACKLIGHT_PIN == B5 || BACKLIGHT_PIN == B6 || BACKLIGHT_PIN == B7) #if (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__)) && (BACKLIGHT_PIN == B5 || BACKLIGHT_PIN == B6 || BACKLIGHT_PIN == B7)
# define HARDWARE_PWM # define HARDWARE_PWM
# define ICRx ICR1 # define ICRx ICR1
# define TCCRxA TCCR1A # define TCCRxA TCCR1A
# define TCCRxB TCCR1B # define TCCRxB TCCR1B
# define TIMERx_OVF_vect TIMER1_OVF_vect # define TIMERx_OVF_vect TIMER1_OVF_vect
# define TIMSKx TIMSK1 # define TIMSKx TIMSK1
# define TOIEx TOIE1 # define TOIEx TOIE1
# if BACKLIGHT_PIN == B5 # if BACKLIGHT_PIN == B5
# define COMxx0 COM1A0 # define COMxx0 COM1A0
# define COMxx1 COM1A1 # define COMxx1 COM1A1
# define OCRxx OCR1A # define OCRxx OCR1A
# elif BACKLIGHT_PIN == B6 # elif BACKLIGHT_PIN == B6
# define COMxx0 COM1B0 # define COMxx0 COM1B0
# define COMxx1 COM1B1 # define COMxx1 COM1B1
# define OCRxx OCR1B # define OCRxx OCR1B
# elif BACKLIGHT_PIN == B7 # elif BACKLIGHT_PIN == B7
# define COMxx0 COM1C0 # define COMxx0 COM1C0
# define COMxx1 COM1C1 # define COMxx1 COM1C1
# define OCRxx OCR1C # define OCRxx OCR1C
# endif # endif
# elif (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__)) && (BACKLIGHT_PIN == C4 || BACKLIGHT_PIN == C5 || BACKLIGHT_PIN == C6) #elif (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__)) && (BACKLIGHT_PIN == C4 || BACKLIGHT_PIN == C5 || BACKLIGHT_PIN == C6)
# define HARDWARE_PWM # define HARDWARE_PWM
# define ICRx ICR3 # define ICRx ICR3
# define TCCRxA TCCR3A # define TCCRxA TCCR3A
# define TCCRxB TCCR3B # define TCCRxB TCCR3B
# define TIMERx_OVF_vect TIMER3_OVF_vect # define TIMERx_OVF_vect TIMER3_OVF_vect
# define TIMSKx TIMSK3 # define TIMSKx TIMSK3
# define TOIEx TOIE3 # define TOIEx TOIE3
# if BACKLIGHT_PIN == C4 # if BACKLIGHT_PIN == C4
# if (defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__)) # if (defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__))
# error This MCU has no C4 pin! # error This MCU has no C4 pin!
# else # else
# define COMxx0 COM3C0 # define COMxx0 COM3C0
# define COMxx1 COM3C1 # define COMxx1 COM3C1
# define OCRxx OCR3C # define OCRxx OCR3C
# endif
# elif BACKLIGHT_PIN == C5
# if (defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__))
# error This MCU has no C5 pin!
# else
# define COMxx0 COM3B0
# define COMxx1 COM3B1
# define OCRxx OCR3B
# endif
# elif BACKLIGHT_PIN == C6
# define COMxx0 COM3A0
# define COMxx1 COM3A1
# define OCRxx OCR3A
# endif # endif
# elif (defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__)) && (BACKLIGHT_PIN == B7 || BACKLIGHT_PIN == C5 || BACKLIGHT_PIN == C6) # elif BACKLIGHT_PIN == C5
# define HARDWARE_PWM # if (defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__))
# define ICRx ICR1 # error This MCU has no C5 pin!
# define TCCRxA TCCR1A # else
# define TCCRxB TCCR1B # define COMxx0 COM3B0
# define TIMERx_OVF_vect TIMER1_OVF_vect # define COMxx1 COM3B1
# define TIMSKx TIMSK1 # define OCRxx OCR3B
# define TOIEx TOIE1
# if BACKLIGHT_PIN == B7
# define COMxx0 COM1C0
# define COMxx1 COM1C1
# define OCRxx OCR1C
# elif BACKLIGHT_PIN == C5
# define COMxx0 COM1B0
# define COMxx1 COM1B1
# define OCRxx OCR1B
# elif BACKLIGHT_PIN == C6
# define COMxx0 COM1A0
# define COMxx1 COM1A1
# define OCRxx OCR1A
# endif # endif
# elif defined(__AVR_ATmega32A__) && (BACKLIGHT_PIN == D4 || BACKLIGHT_PIN == D5) # elif BACKLIGHT_PIN == C6
# define HARDWARE_PWM # define COMxx0 COM3A0
# define ICRx ICR1 # define COMxx1 COM3A1
# define TCCRxA TCCR1A # define OCRxx OCR3A
# define TCCRxB TCCR1B # endif
# define TIMERx_OVF_vect TIMER1_OVF_vect #elif (defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__)) && (BACKLIGHT_PIN == B7 || BACKLIGHT_PIN == C5 || BACKLIGHT_PIN == C6)
# define HARDWARE_PWM
# define ICRx ICR1
# define TCCRxA TCCR1A
# define TCCRxB TCCR1B
# define TIMERx_OVF_vect TIMER1_OVF_vect
# define TIMSKx TIMSK1
# define TOIEx TOIE1
# if BACKLIGHT_PIN == B7
# define COMxx0 COM1C0
# define COMxx1 COM1C1
# define OCRxx OCR1C
# elif BACKLIGHT_PIN == C5
# define COMxx0 COM1B0
# define COMxx1 COM1B1
# define OCRxx OCR1B
# elif BACKLIGHT_PIN == C6
# define COMxx0 COM1A0
# define COMxx1 COM1A1
# define OCRxx OCR1A
# endif
#elif defined(__AVR_ATmega32A__) && (BACKLIGHT_PIN == D4 || BACKLIGHT_PIN == D5)
# define HARDWARE_PWM
# define ICRx ICR1
# define TCCRxA TCCR1A
# define TCCRxB TCCR1B
# define TIMERx_OVF_vect TIMER1_OVF_vect
# define TIMSKx TIMSK
# define TOIEx TOIE1
# if BACKLIGHT_PIN == D4
# define COMxx0 COM1B0
# define COMxx1 COM1B1
# define OCRxx OCR1B
# elif BACKLIGHT_PIN == D5
# define COMxx0 COM1A0
# define COMxx1 COM1A1
# define OCRxx OCR1A
# endif
#elif defined(__AVR_ATmega328P__) && (BACKLIGHT_PIN == B1 || BACKLIGHT_PIN == B2)
# define HARDWARE_PWM
# define ICRx ICR1
# define TCCRxA TCCR1A
# define TCCRxB TCCR1B
# define TIMERx_OVF_vect TIMER1_OVF_vect
# define TIMSKx TIMSK1
# define TOIEx TOIE1
# if BACKLIGHT_PIN == B1
# define COMxx0 COM1A0
# define COMxx1 COM1A1
# define OCRxx OCR1A
# elif BACKLIGHT_PIN == B2
# define COMxx0 COM1B0
# define COMxx1 COM1B1
# define OCRxx OCR1B
# endif
#elif !defined(B5_AUDIO) && !defined(B6_AUDIO) && !defined(B7_AUDIO)
// Timer 1 is not in use by Audio feature, Backlight can use it
# pragma message "Using hardware timer 1 with software PWM"
# define HARDWARE_PWM
# define BACKLIGHT_PWM_TIMER
# define ICRx ICR1
# define TCCRxA TCCR1A
# define TCCRxB TCCR1B
# define TIMERx_COMPA_vect TIMER1_COMPA_vect
# define TIMERx_OVF_vect TIMER1_OVF_vect
# if defined(__AVR_ATmega32A__) // This MCU has only one TIMSK register
# define TIMSKx TIMSK # define TIMSKx TIMSK
# define TOIEx TOIE1
# if BACKLIGHT_PIN == D4
# define COMxx0 COM1B0
# define COMxx1 COM1B1
# define OCRxx OCR1B
# elif BACKLIGHT_PIN == D5
# define COMxx0 COM1A0
# define COMxx1 COM1A1
# define OCRxx OCR1A
# endif
# elif defined(__AVR_ATmega328P__) && (BACKLIGHT_PIN == B1 || BACKLIGHT_PIN == B2)
# define HARDWARE_PWM
# define ICRx ICR1
# define TCCRxA TCCR1A
# define TCCRxB TCCR1B
# define TIMERx_OVF_vect TIMER1_OVF_vect
# define TIMSKx TIMSK1
# define TOIEx TOIE1
# if BACKLIGHT_PIN == B1
# define COMxx0 COM1A0
# define COMxx1 COM1A1
# define OCRxx OCR1A
# elif BACKLIGHT_PIN == B2
# define COMxx0 COM1B0
# define COMxx1 COM1B1
# define OCRxx OCR1B
# endif
# else # else
# if !defined(BACKLIGHT_CUSTOM_DRIVER) # define TIMSKx TIMSK1
# if !defined(B5_AUDIO) && !defined(B6_AUDIO) && !defined(B7_AUDIO)
// Timer 1 is not in use by Audio feature, Backlight can use it
# pragma message "Using hardware timer 1 with software PWM"
# define HARDWARE_PWM
# define BACKLIGHT_PWM_TIMER
# define ICRx ICR1
# define TCCRxA TCCR1A
# define TCCRxB TCCR1B
# define TIMERx_COMPA_vect TIMER1_COMPA_vect
# define TIMERx_OVF_vect TIMER1_OVF_vect
# if defined(__AVR_ATmega32A__) // This MCU has only one TIMSK register
# define TIMSKx TIMSK
# else
# define TIMSKx TIMSK1
# endif
# define TOIEx TOIE1
# define OCIExA OCIE1A
# define OCRxx OCR1A
# elif !defined(C6_AUDIO) && !defined(C5_AUDIO) && !defined(C4_AUDIO)
# pragma message "Using hardware timer 3 with software PWM"
// Timer 3 is not in use by Audio feature, Backlight can use it
# define HARDWARE_PWM
# define BACKLIGHT_PWM_TIMER
# define ICRx ICR1
# define TCCRxA TCCR3A
# define TCCRxB TCCR3B
# define TIMERx_COMPA_vect TIMER3_COMPA_vect
# define TIMERx_OVF_vect TIMER3_OVF_vect
# define TIMSKx TIMSK3
# define TOIEx TOIE3
# define OCIExA OCIE3A
# define OCRxx OCR3A
# else
# pragma message "Audio in use - using pure software PWM"
# define NO_HARDWARE_PWM
# endif
# else
# pragma message "Custom driver defined - using pure software PWM"
# define NO_HARDWARE_PWM
# endif
# endif # endif
# define TOIEx TOIE1
# ifndef BACKLIGHT_ON_STATE # define OCIExA OCIE1A
# define BACKLIGHT_ON_STATE 1 # define OCRxx OCR1A
# endif #elif !defined(C6_AUDIO) && !defined(C5_AUDIO) && !defined(C4_AUDIO)
# pragma message "Using hardware timer 3 with software PWM"
// Timer 3 is not in use by Audio feature, Backlight can use it
# define HARDWARE_PWM
# define BACKLIGHT_PWM_TIMER
# define ICRx ICR1
# define TCCRxA TCCR3A
# define TCCRxB TCCR3B
# define TIMERx_COMPA_vect TIMER3_COMPA_vect
# define TIMERx_OVF_vect TIMER3_OVF_vect
# define TIMSKx TIMSK3
# define TOIEx TOIE3
# define OCIExA OCIE3A
# define OCRxx OCR3A
#elif defined(BACKLIGHT_CUSTOM_DRIVER)
error("Please set 'BACKLIGHT_DRIVER = custom' within rules.mk")
#else
error("Please set 'BACKLIGHT_DRIVER = software' within rules.mk")
#endif
#ifndef BACKLIGHT_ON_STATE
# define BACKLIGHT_ON_STATE 1
#endif
void backlight_on(pin_t backlight_pin) { void backlight_on(pin_t backlight_pin) {
# if BACKLIGHT_ON_STATE == 1 #if BACKLIGHT_ON_STATE == 1
writePinHigh(backlight_pin); writePinHigh(backlight_pin);
# else #else
writePinLow(backlight_pin); writePinLow(backlight_pin);
# endif #endif
} }
void backlight_off(pin_t backlight_pin) { void backlight_off(pin_t backlight_pin) {
# if BACKLIGHT_ON_STATE == 1 #if BACKLIGHT_ON_STATE == 1
writePinLow(backlight_pin); writePinLow(backlight_pin);
# else #else
writePinHigh(backlight_pin); writePinHigh(backlight_pin);
# endif #endif
} }
# if defined(NO_HARDWARE_PWM) || defined(BACKLIGHT_PWM_TIMER) // pwm through software #ifdef BACKLIGHT_PWM_TIMER // pwm through software
// we support multiple backlight pins // we support multiple backlight pins
# ifndef BACKLIGHT_LED_COUNT # ifndef BACKLIGHT_LED_COUNT
# define BACKLIGHT_LED_COUNT 1 # define BACKLIGHT_LED_COUNT 1
# endif # endif
# if BACKLIGHT_LED_COUNT == 1 # if BACKLIGHT_LED_COUNT == 1
# define BACKLIGHT_PIN_INIT \ # define BACKLIGHT_PIN_INIT \
{ BACKLIGHT_PIN } { BACKLIGHT_PIN }
# else # else
# define BACKLIGHT_PIN_INIT BACKLIGHT_PINS # define BACKLIGHT_PIN_INIT BACKLIGHT_PINS
# endif # endif
# define FOR_EACH_LED(x) \ # define FOR_EACH_LED(x) \
for (uint8_t i = 0; i < BACKLIGHT_LED_COUNT; i++) { \ for (uint8_t i = 0; i < BACKLIGHT_LED_COUNT; i++) { \
pin_t backlight_pin = backlight_pins[i]; \ pin_t backlight_pin = backlight_pins[i]; \
{ x } \ { x } \
} }
static const pin_t backlight_pins[BACKLIGHT_LED_COUNT] = BACKLIGHT_PIN_INIT; static const pin_t backlight_pins[BACKLIGHT_LED_COUNT] = BACKLIGHT_PIN_INIT;
# else // full hardware PWM #else // full hardware PWM
static inline void enable_pwm(void) { static inline void enable_pwm(void) {
# if BACKLIGHT_ON_STATE == 1 # if BACKLIGHT_ON_STATE == 1
TCCRxA |= _BV(COMxx1); TCCRxA |= _BV(COMxx1);
# else # else
TCCRxA |= _BV(COMxx1) | _BV(COMxx0); TCCRxA |= _BV(COMxx1) | _BV(COMxx0);
# endif # endif
} }
static inline void disable_pwm(void) { static inline void disable_pwm(void) {
# if BACKLIGHT_ON_STATE == 1 # if BACKLIGHT_ON_STATE == 1
TCCRxA &= ~(_BV(COMxx1)); TCCRxA &= ~(_BV(COMxx1));
# else # else
TCCRxA &= ~(_BV(COMxx1) | _BV(COMxx0)); TCCRxA &= ~(_BV(COMxx1) | _BV(COMxx0));
# endif # endif
} }
// we support only one backlight pin // we support only one backlight pin
static const pin_t backlight_pin = BACKLIGHT_PIN; static const pin_t backlight_pin = BACKLIGHT_PIN;
# define FOR_EACH_LED(x) x # define FOR_EACH_LED(x) x
# endif
# ifdef NO_HARDWARE_PWM
void backlight_init_ports(void) {
// Setup backlight pin as output and output to on state.
FOR_EACH_LED(setPinOutput(backlight_pin); backlight_on(backlight_pin);)
# ifdef BACKLIGHT_BREATHING
if (is_backlight_breathing()) {
breathing_enable();
}
# endif
}
uint8_t backlight_tick = 0;
# ifndef BACKLIGHT_CUSTOM_DRIVER
void backlight_task(void) {
if ((0xFFFF >> ((BACKLIGHT_LEVELS - get_backlight_level()) * ((BACKLIGHT_LEVELS + 1) / 2))) & (1 << backlight_tick)) {
FOR_EACH_LED(backlight_on(backlight_pin);)
} else {
FOR_EACH_LED(backlight_off(backlight_pin);)
}
backlight_tick = (backlight_tick + 1) % 16;
}
# endif
# ifdef BACKLIGHT_BREATHING
# ifndef BACKLIGHT_CUSTOM_DRIVER
# error "Backlight breathing only available with hardware PWM. Please disable."
# endif
# endif
# else // hardware pwm through timer #endif
# ifdef BACKLIGHT_PWM_TIMER #ifdef BACKLIGHT_PWM_TIMER
// The idea of software PWM assisted by hardware timers is the following // The idea of software PWM assisted by hardware timers is the following
// we use the hardware timer in fast PWM mode like for hardware PWM, but // we use the hardware timer in fast PWM mode like for hardware PWM, but
@ -288,11 +251,11 @@ ISR(TIMERx_COMPA_vect) { FOR_EACH_LED(backlight_off(backlight_pin);) }
// Triggered when the counter reaches the TOP value // Triggered when the counter reaches the TOP value
// this one triggers at F_CPU/65536 =~ 244 Hz // this one triggers at F_CPU/65536 =~ 244 Hz
ISR(TIMERx_OVF_vect) { ISR(TIMERx_OVF_vect) {
# ifdef BACKLIGHT_BREATHING # ifdef BACKLIGHT_BREATHING
if (is_breathing()) { if (is_breathing()) {
breathing_task(); breathing_task();
} }
# endif # endif
// for very small values of OCRxx (or backlight level) // for very small values of OCRxx (or backlight level)
// we can't guarantee this whole code won't execute // we can't guarantee this whole code won't execute
// at the same time as the compare match interrupt // at the same time as the compare match interrupt
@ -306,9 +269,9 @@ ISR(TIMERx_OVF_vect) {
} }
} }
# endif #endif
# define TIMER_TOP 0xFFFFU #define TIMER_TOP 0xFFFFU
// See http://jared.geek.nz/2013/feb/linear-led-pwm // See http://jared.geek.nz/2013/feb/linear-led-pwm
static uint16_t cie_lightness(uint16_t v) { static uint16_t cie_lightness(uint16_t v) {
@ -329,88 +292,86 @@ static uint16_t cie_lightness(uint16_t v) {
// range for val is [0..TIMER_TOP]. PWM pin is high while the timer count is below val. // range for val is [0..TIMER_TOP]. PWM pin is high while the timer count is below val.
static inline void set_pwm(uint16_t val) { OCRxx = val; } static inline void set_pwm(uint16_t val) { OCRxx = val; }
# ifndef BACKLIGHT_CUSTOM_DRIVER
void backlight_set(uint8_t level) { void backlight_set(uint8_t level) {
if (level > BACKLIGHT_LEVELS) level = BACKLIGHT_LEVELS; if (level > BACKLIGHT_LEVELS) level = BACKLIGHT_LEVELS;
if (level == 0) { if (level == 0) {
# ifdef BACKLIGHT_PWM_TIMER #ifdef BACKLIGHT_PWM_TIMER
if (OCRxx) { if (OCRxx) {
TIMSKx &= ~(_BV(OCIExA)); TIMSKx &= ~(_BV(OCIExA));
TIMSKx &= ~(_BV(TOIEx)); TIMSKx &= ~(_BV(TOIEx));
} }
# else #else
// Turn off PWM control on backlight pin // Turn off PWM control on backlight pin
disable_pwm(); disable_pwm();
# endif #endif
FOR_EACH_LED(backlight_off(backlight_pin);) FOR_EACH_LED(backlight_off(backlight_pin);)
} else { } else {
# ifdef BACKLIGHT_PWM_TIMER #ifdef BACKLIGHT_PWM_TIMER
if (!OCRxx) { if (!OCRxx) {
TIMSKx |= _BV(OCIExA); TIMSKx |= _BV(OCIExA);
TIMSKx |= _BV(TOIEx); TIMSKx |= _BV(TOIEx);
} }
# else #else
// Turn on PWM control of backlight pin // Turn on PWM control of backlight pin
enable_pwm(); enable_pwm();
# endif #endif
} }
// Set the brightness // Set the brightness
set_pwm(cie_lightness(TIMER_TOP * (uint32_t)level / BACKLIGHT_LEVELS)); set_pwm(cie_lightness(TIMER_TOP * (uint32_t)level / BACKLIGHT_LEVELS));
} }
void backlight_task(void) {} void backlight_task(void) {}
# endif // BACKLIGHT_CUSTOM_DRIVER
# ifdef BACKLIGHT_BREATHING #ifdef BACKLIGHT_BREATHING
# define BREATHING_NO_HALT 0 # define BREATHING_NO_HALT 0
# define BREATHING_HALT_OFF 1 # define BREATHING_HALT_OFF 1
# define BREATHING_HALT_ON 2 # define BREATHING_HALT_ON 2
# define BREATHING_STEPS 128 # define BREATHING_STEPS 128
static uint8_t breathing_halt = BREATHING_NO_HALT; static uint8_t breathing_halt = BREATHING_NO_HALT;
static uint16_t breathing_counter = 0; static uint16_t breathing_counter = 0;
# ifdef BACKLIGHT_PWM_TIMER # ifdef BACKLIGHT_PWM_TIMER
static bool breathing = false; static bool breathing = false;
bool is_breathing(void) { return breathing; } bool is_breathing(void) { return breathing; }
# define breathing_interrupt_enable() \ # define breathing_interrupt_enable() \
do { \ do { \
breathing = true; \ breathing = true; \
} while (0) } while (0)
# define breathing_interrupt_disable() \ # define breathing_interrupt_disable() \
do { \ do { \
breathing = false; \ breathing = false; \
} while (0) } while (0)
# else # else
bool is_breathing(void) { return !!(TIMSKx & _BV(TOIEx)); } bool is_breathing(void) { return !!(TIMSKx & _BV(TOIEx)); }
# define breathing_interrupt_enable() \ # define breathing_interrupt_enable() \
do { \ do { \
TIMSKx |= _BV(TOIEx); \ TIMSKx |= _BV(TOIEx); \
} while (0) } while (0)
# define breathing_interrupt_disable() \ # define breathing_interrupt_disable() \
do { \ do { \
TIMSKx &= ~_BV(TOIEx); \ TIMSKx &= ~_BV(TOIEx); \
} while (0) } while (0)
# endif # endif
# define breathing_min() \ # define breathing_min() \
do { \ do { \
breathing_counter = 0; \ breathing_counter = 0; \
} while (0) } while (0)
# define breathing_max() \ # define breathing_max() \
do { \ do { \
breathing_counter = get_breathing_period() * 244 / 2; \ breathing_counter = get_breathing_period() * 244 / 2; \
} while (0) } while (0)
void breathing_enable(void) { void breathing_enable(void) {
breathing_counter = 0; breathing_counter = 0;
breathing_halt = BREATHING_NO_HALT; breathing_halt = BREATHING_NO_HALT;
breathing_interrupt_enable(); breathing_interrupt_enable();
} }
@ -451,20 +412,20 @@ static const uint8_t breathing_table[BREATHING_STEPS] PROGMEM = {0, 0, 0, 0, 0,
// Use this before the cie_lightness function. // Use this before the cie_lightness function.
static inline uint16_t scale_backlight(uint16_t v) { return v / BACKLIGHT_LEVELS * get_backlight_level(); } static inline uint16_t scale_backlight(uint16_t v) { return v / BACKLIGHT_LEVELS * get_backlight_level(); }
# ifdef BACKLIGHT_PWM_TIMER # ifdef BACKLIGHT_PWM_TIMER
void breathing_task(void) void breathing_task(void)
# else # else
/* Assuming a 16MHz CPU clock and a timer that resets at 64k (ICR1), the following interrupt handler will run /* Assuming a 16MHz CPU clock and a timer that resets at 64k (ICR1), the following interrupt handler will run
* about 244 times per second. * about 244 times per second.
*/ */
ISR(TIMERx_OVF_vect) ISR(TIMERx_OVF_vect)
# endif # endif
{ {
uint8_t breathing_period = get_breathing_period(); uint8_t breathing_period = get_breathing_period();
uint16_t interval = (uint16_t)breathing_period * 244 / BREATHING_STEPS; uint16_t interval = (uint16_t)breathing_period * 244 / BREATHING_STEPS;
// resetting after one period to prevent ugly reset at overflow. // resetting after one period to prevent ugly reset at overflow.
breathing_counter = (breathing_counter + 1) % (breathing_period * 244); breathing_counter = (breathing_counter + 1) % (breathing_period * 244);
uint8_t index = breathing_counter / interval % BREATHING_STEPS; uint8_t index = breathing_counter / interval % BREATHING_STEPS;
if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) || ((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1))) { if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) || ((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1))) {
breathing_interrupt_disable(); breathing_interrupt_disable();
@ -473,7 +434,7 @@ ISR(TIMERx_OVF_vect)
set_pwm(cie_lightness(scale_backlight((uint16_t)pgm_read_byte(&breathing_table[index]) * 0x0101U))); set_pwm(cie_lightness(scale_backlight((uint16_t)pgm_read_byte(&breathing_table[index]) * 0x0101U)));
} }
# endif // BACKLIGHT_BREATHING #endif // BACKLIGHT_BREATHING
void backlight_init_ports(void) { void backlight_init_ports(void) {
// Setup backlight pin as output and output to on state. // Setup backlight pin as output and output to on state.
@ -483,12 +444,12 @@ void backlight_init_ports(void) {
// Go read the ATmega32u4 datasheet. // Go read the ATmega32u4 datasheet.
// And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on // And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on
# ifdef BACKLIGHT_PWM_TIMER #ifdef BACKLIGHT_PWM_TIMER
// TimerX setup, Fast PWM mode count to TOP set in ICRx // TimerX setup, Fast PWM mode count to TOP set in ICRx
TCCRxA = _BV(WGM11); // = 0b00000010; TCCRxA = _BV(WGM11); // = 0b00000010;
// clock select clk/1 // clock select clk/1
TCCRxB = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001; TCCRxB = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001;
# else // hardware PWM #else // hardware PWM
// Pin PB7 = OCR1C (Timer 1, Channel C) // Pin PB7 = OCR1C (Timer 1, Channel C)
// Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0 // Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0
// (i.e. start high, go low when counter matches.) // (i.e. start high, go low when counter matches.)
@ -500,25 +461,21 @@ void backlight_init_ports(void) {
"In fast PWM mode, the compare units allow generation of PWM waveforms on the OCnx pins. Setting the COMnx1:0 bits to two will produce a non-inverted PWM [..]." "In fast PWM mode, the compare units allow generation of PWM waveforms on the OCnx pins. Setting the COMnx1:0 bits to two will produce a non-inverted PWM [..]."
"In fast PWM mode the counter is incremented until the counter value matches either one of the fixed values 0x00FF, 0x01FF, or 0x03FF (WGMn3:0 = 5, 6, or 7), the value in ICRn (WGMn3:0 = 14), or the value in OCRnA (WGMn3:0 = 15)." "In fast PWM mode the counter is incremented until the counter value matches either one of the fixed values 0x00FF, 0x01FF, or 0x03FF (WGMn3:0 = 5, 6, or 7), the value in ICRn (WGMn3:0 = 14), or the value in OCRnA (WGMn3:0 = 15)."
*/ */
# if BACKLIGHT_ON_STATE == 1 # if BACKLIGHT_ON_STATE == 1
TCCRxA = _BV(COMxx1) | _BV(WGM11); TCCRxA = _BV(COMxx1) | _BV(WGM11);
# else # else
TCCRxA = _BV(COMxx1) | _BV(COMxx0) | _BV(WGM11); TCCRxA = _BV(COMxx1) | _BV(COMxx0) | _BV(WGM11);
# endif # endif
TCCRxB = _BV(WGM13) | _BV(WGM12) | _BV(CS10); TCCRxB = _BV(WGM13) | _BV(WGM12) | _BV(CS10);
# endif #endif
// Use full 16-bit resolution. Counter counts to ICR1 before reset to 0. // Use full 16-bit resolution. Counter counts to ICR1 before reset to 0.
ICRx = TIMER_TOP; ICRx = TIMER_TOP;
backlight_init(); backlight_init();
# ifdef BACKLIGHT_BREATHING #ifdef BACKLIGHT_BREATHING
if (is_backlight_breathing()) { if (is_backlight_breathing()) {
breathing_enable(); breathing_enable();
} }
# endif #endif
} }
# endif // hardware backlight
#endif // backlight

Write Preview
Loading…
Cancel
Save