Prune out pure software pwm && custom driver && remove wrapping BACKLIGHT_PIN (#8041)

5 years ago · 88356c85c4
parent 3dc061ac78
commit 88356c85c4
1 changed files with 241 additions and 284 deletions
--- a/quantum/backlight/backlight_avr.c
+++ b/quantum/backlight/backlight_avr.c
@ -2,7 +2,9 @@
 #include "backlight.h"
 #include "debug.h"

-#if defined(BACKLIGHT_ENABLE) && (defined(BACKLIGHT_PIN) || defined(BACKLIGHT_PINS))
+#if !defined(BACKLIGHT_PIN) && !defined(BACKLIGHT_PINS)
+#    error "Backlight pin/pins not defined. Please configure."
+#endif

 // This logic is a bit complex, we support 3 setups:
 //
@ -12,7 +14,7 @@
 //      depends on the Audio setup (Audio wins over Backlight).
 //   3. Full software PWM, driven by the matrix scan, if both timers are used by Audio.

-#    if (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__)) && (BACKLIGHT_PIN == B5 || BACKLIGHT_PIN == B6 || BACKLIGHT_PIN == B7)
+#if (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__)) && (BACKLIGHT_PIN == B5 || BACKLIGHT_PIN == B6 || BACKLIGHT_PIN == B7)
 #    define HARDWARE_PWM
 #    define ICRx ICR1
 #    define TCCRxA TCCR1A
@ -34,7 +36,7 @@
 #        define COMxx1 COM1C1
 #        define OCRxx OCR1C
 #    endif
-#    elif (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__)) && (BACKLIGHT_PIN == C4 || BACKLIGHT_PIN == C5 || BACKLIGHT_PIN == C6)
+#elif (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) || defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__)) && (BACKLIGHT_PIN == C4 || BACKLIGHT_PIN == C5 || BACKLIGHT_PIN == C6)
 #    define HARDWARE_PWM
 #    define ICRx ICR3
 #    define TCCRxA TCCR3A
@ -64,7 +66,7 @@
 #        define COMxx1 COM3A1
 #        define OCRxx OCR3A
 #    endif
-#    elif (defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__)) && (BACKLIGHT_PIN == B7 || BACKLIGHT_PIN == C5 || BACKLIGHT_PIN == C6)
+#elif (defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega32U2__)) && (BACKLIGHT_PIN == B7 || BACKLIGHT_PIN == C5 || BACKLIGHT_PIN == C6)
 #    define HARDWARE_PWM
 #    define ICRx ICR1
 #    define TCCRxA TCCR1A
@ -86,7 +88,7 @@
 #        define COMxx1 COM1A1
 #        define OCRxx OCR1A
 #    endif
-#    elif defined(__AVR_ATmega32A__) && (BACKLIGHT_PIN == D4 || BACKLIGHT_PIN == D5)
+#elif defined(__AVR_ATmega32A__) && (BACKLIGHT_PIN == D4 || BACKLIGHT_PIN == D5)
 #    define HARDWARE_PWM
 #    define ICRx ICR1
 #    define TCCRxA TCCR1A
@ -104,7 +106,7 @@
 #        define COMxx1 COM1A1
 #        define OCRxx OCR1A
 #    endif
-#    elif defined(__AVR_ATmega328P__) && (BACKLIGHT_PIN == B1 || BACKLIGHT_PIN == B2)
+#elif defined(__AVR_ATmega328P__) && (BACKLIGHT_PIN == B1 || BACKLIGHT_PIN == B2)
 #    define HARDWARE_PWM
 #    define ICRx ICR1
 #    define TCCRxA TCCR1A
@ -122,9 +124,7 @@
 #        define COMxx1 COM1B1
 #        define OCRxx OCR1B
 #    endif
-#    else
-#        if !defined(BACKLIGHT_CUSTOM_DRIVER)
-#            if !defined(B5_AUDIO) && !defined(B6_AUDIO) && !defined(B7_AUDIO)
+#elif !defined(B5_AUDIO) && !defined(B6_AUDIO) && !defined(B7_AUDIO)
 // Timer 1 is not in use by Audio feature, Backlight can use it
 #    pragma message "Using hardware timer 1 with software PWM"
 #    define HARDWARE_PWM
@ -143,7 +143,7 @@

 #    define OCIExA OCIE1A
 #    define OCRxx OCR1A
-#            elif !defined(C6_AUDIO) && !defined(C5_AUDIO) && !defined(C4_AUDIO)
+#elif !defined(C6_AUDIO) && !defined(C5_AUDIO) && !defined(C4_AUDIO)
 #    pragma message "Using hardware timer 3 with software PWM"
 // Timer 3 is not in use by Audio feature, Backlight can use it
 #    define HARDWARE_PWM
@ -158,37 +158,33 @@

 #    define OCIExA OCIE3A
 #    define OCRxx OCR3A
-#            else
-#                pragma message "Audio in use - using pure software PWM"
-#                define NO_HARDWARE_PWM
-#            endif
-#        else
-#            pragma message "Custom driver defined - using pure software PWM"
-#            define NO_HARDWARE_PWM
-#        endif
-#    endif
+#elif defined(BACKLIGHT_CUSTOM_DRIVER)
+error("Please set 'BACKLIGHT_DRIVER = custom' within rules.mk")
+#else
+error("Please set 'BACKLIGHT_DRIVER = software' within rules.mk")
+#endif

-#    ifndef BACKLIGHT_ON_STATE
+#ifndef BACKLIGHT_ON_STATE
 #    define BACKLIGHT_ON_STATE 1
-#    endif
+#endif

 void backlight_on(pin_t backlight_pin) {
-#    if BACKLIGHT_ON_STATE == 1
+#if BACKLIGHT_ON_STATE == 1
    writePinHigh(backlight_pin);
-#    else
+#else
    writePinLow(backlight_pin);
-#    endif
+#endif
 }

 void backlight_off(pin_t backlight_pin) {
-#    if BACKLIGHT_ON_STATE == 1
+#if BACKLIGHT_ON_STATE == 1
    writePinLow(backlight_pin);
-#    else
+#else
    writePinHigh(backlight_pin);
-#    endif
+#endif
 }

-#    if defined(NO_HARDWARE_PWM) || defined(BACKLIGHT_PWM_TIMER)  // pwm through software
+#ifdef BACKLIGHT_PWM_TIMER  // pwm through software

 // we support multiple backlight pins
 #    ifndef BACKLIGHT_LED_COUNT
@ -210,7 +206,7 @@ void backlight_off(pin_t backlight_pin) {

 static const pin_t backlight_pins[BACKLIGHT_LED_COUNT] = BACKLIGHT_PIN_INIT;

-#    else  // full hardware PWM
+#else  // full hardware PWM

 static inline void enable_pwm(void) {
 #    if BACKLIGHT_ON_STATE == 1
@ -232,42 +228,9 @@ static inline void disable_pwm(void) {
 static const pin_t backlight_pin = BACKLIGHT_PIN;
 #    define FOR_EACH_LED(x) x

-#    endif
+#endif

-#    ifdef NO_HARDWARE_PWM
-void backlight_init_ports(void) {
-    // Setup backlight pin as output and output to on state.
-    FOR_EACH_LED(setPinOutput(backlight_pin); backlight_on(backlight_pin);)
-
-#        ifdef BACKLIGHT_BREATHING
-    if (is_backlight_breathing()) {
-        breathing_enable();
-    }
-#        endif
-}
-
-uint8_t backlight_tick = 0;
-
-#        ifndef BACKLIGHT_CUSTOM_DRIVER
-void backlight_task(void) {
-    if ((0xFFFF >> ((BACKLIGHT_LEVELS - get_backlight_level()) * ((BACKLIGHT_LEVELS + 1) / 2))) & (1 << backlight_tick)) {
-        FOR_EACH_LED(backlight_on(backlight_pin);)
-    } else {
-        FOR_EACH_LED(backlight_off(backlight_pin);)
-    }
-    backlight_tick = (backlight_tick + 1) % 16;
-}
-#        endif
-
-#        ifdef BACKLIGHT_BREATHING
-#            ifndef BACKLIGHT_CUSTOM_DRIVER
-#                error "Backlight breathing only available with hardware PWM. Please disable."
-#            endif
-#        endif
-
-#    else  // hardware pwm through timer
-
-#        ifdef BACKLIGHT_PWM_TIMER
+#ifdef BACKLIGHT_PWM_TIMER

 // The idea of software PWM assisted by hardware timers is the following
 // we use the hardware timer in fast PWM mode like for hardware PWM, but
@ -306,9 +269,9 @@ ISR(TIMERx_OVF_vect) {
    }
 }

-#        endif
+#endif

-#        define TIMER_TOP 0xFFFFU
+#define TIMER_TOP 0xFFFFU

 // See http://jared.geek.nz/2013/feb/linear-led-pwm
 static uint16_t cie_lightness(uint16_t v) {
@ -329,40 +292,38 @@ static uint16_t cie_lightness(uint16_t v) {
 // range for val is [0..TIMER_TOP]. PWM pin is high while the timer count is below val.
 static inline void set_pwm(uint16_t val) { OCRxx = val; }

-#        ifndef BACKLIGHT_CUSTOM_DRIVER
 void backlight_set(uint8_t level) {
    if (level > BACKLIGHT_LEVELS) level = BACKLIGHT_LEVELS;

    if (level == 0) {
-#            ifdef BACKLIGHT_PWM_TIMER
+#ifdef BACKLIGHT_PWM_TIMER
        if (OCRxx) {
            TIMSKx &= ~(_BV(OCIExA));
            TIMSKx &= ~(_BV(TOIEx));
        }
-#            else
+#else
        // Turn off PWM control on backlight pin
        disable_pwm();
-#            endif
+#endif
        FOR_EACH_LED(backlight_off(backlight_pin);)
    } else {
-#            ifdef BACKLIGHT_PWM_TIMER
+#ifdef BACKLIGHT_PWM_TIMER
        if (!OCRxx) {
            TIMSKx |= _BV(OCIExA);
            TIMSKx |= _BV(TOIEx);
        }
-#            else
+#else
        // Turn on PWM control of backlight pin
        enable_pwm();
-#            endif
+#endif
    }
    // Set the brightness
    set_pwm(cie_lightness(TIMER_TOP * (uint32_t)level / BACKLIGHT_LEVELS));
 }

 void backlight_task(void) {}
-#        endif  // BACKLIGHT_CUSTOM_DRIVER

-#        ifdef BACKLIGHT_BREATHING
+#ifdef BACKLIGHT_BREATHING

 #    define BREATHING_NO_HALT 0
 #    define BREATHING_HALT_OFF 1
@ -473,7 +434,7 @@ ISR(TIMERx_OVF_vect)
    set_pwm(cie_lightness(scale_backlight((uint16_t)pgm_read_byte(&breathing_table[index]) * 0x0101U)));
 }

-#        endif  // BACKLIGHT_BREATHING
+#endif  // BACKLIGHT_BREATHING

 void backlight_init_ports(void) {
    // Setup backlight pin as output and output to on state.
@ -483,12 +444,12 @@ void backlight_init_ports(void) {
    // Go read the ATmega32u4 datasheet.
    // And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on

-#        ifdef BACKLIGHT_PWM_TIMER
+#ifdef BACKLIGHT_PWM_TIMER
    // TimerX setup, Fast PWM mode count to TOP set in ICRx
    TCCRxA = _BV(WGM11);  // = 0b00000010;
    // clock select clk/1
    TCCRxB = _BV(WGM13) | _BV(WGM12) | _BV(CS10);  // = 0b00011001;
-#        else  // hardware PWM
+#else                                              // hardware PWM
    // Pin PB7 = OCR1C (Timer 1, Channel C)
    // Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0
    // (i.e. start high, go low when counter matches.)
@ -507,18 +468,14 @@ void backlight_init_ports(void) {
 #    endif

    TCCRxB = _BV(WGM13) | _BV(WGM12) | _BV(CS10);
-#        endif
+#endif
    // Use full 16-bit resolution. Counter counts to ICR1 before reset to 0.
    ICRx = TIMER_TOP;

    backlight_init();
-#        ifdef BACKLIGHT_BREATHING
+#ifdef BACKLIGHT_BREATHING
    if (is_backlight_breathing()) {
        breathing_enable();
    }
-#        endif
+#endif
 }
-
-#    endif  // hardware backlight
-
-#endif  // backlight