hailey
/
qmk_firmware
mirror of https://github.com/hailey/qmk_firmware.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Updated readme to show compile rules that won't throw an error

Browse Source
b6_b7_audio
unknown 8 years ago committed by Jack Humbert
parent f2824bca02
commit 9334986bd9
1 changed files with 134 additions and 126 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 260
      keyboards/deltasplit75/readme.md

260
keyboards/deltasplit75/readme.md
Unescape View File

@ -1,126 +1,134 @@
DeltaSplit75 DeltaSplit75
====== ======
This readme and most of the code are from https://github.com/ahtn/tmk_keyboard/ and https://github.com/qmk/qmk_firmware/tree/master/keyboards/lets_split This readme and most of the code are from https://github.com/ahtn/tmk_keyboard/ and https://github.com/qmk/qmk_firmware/tree/master/keyboards/lets_split
Credit to ahtn and wootpatoot for work on the split keyboard firmware Credit to ahtn and wootpatoot for work on the split keyboard firmware
Split keyboard firmware for Arduino Pro Micro or other ATmega32u4 Split keyboard firmware for Arduino Pro Micro or other ATmega32u4
based boards. based boards.
## Case Files ## Case Files
Files are available here: https://github.com/xyxjj/DeltaSplit75-Case-files Files are available here: https://github.com/xyxjj/DeltaSplit75-Case-files
## First Time Setup ## First Time Setup
Download or clone the whole firmware and navigate to the keyboards/DeltaSplit75 directory. Once your dev env is setup, you'll be able to generate the default .hex using: Download or clone the whole firmware and navigate to the keyboards/deltasplit75 directory. Once your dev env is setup, you'll be able to generate the default .hex using:
``` ```
make v2 make v2-default
or or
make protosplit-protosplit (if you have one of the prototype PCBs) make v2-YOUR_KEYMAP_NAME
```
or
You will see a lot of output and if everything worked correctly you will see the built hex files:
make protosplit-protosplit (if you have one of the prototype PCBs)
``` ```
deltasplit75_protosplit_protosplit.hex
You will see a lot of output and if everything worked correctly you will see the built hex files:
or
```
deltasplit75_v2_default.hex deltasplit75_protosplit_protosplit.hex
``` or
deltasplit74_v2_YOUR_KEYMAP_NAME.hex
For more information on customizing keymaps, take a look at the primary documentation for [Customizing Your Keymap](/readme.md##customizing-your-keymap) in the main readme.md.
or
### DeltaSplit75 V2
The PCBs available in groupbuy are all v2, if you've bought one of my prototype PCBs (it says DeltaSplit65 on the silkscreen instead of 75), use the code make ProtoSplit-ProtoSplit instead deltasplit75_v2_default.hex
Features ```
--------
For the full Quantum Mechanical Keyboard feature list, see [the parent readme.md](/readme.md). For more information on customizing keymaps, take a look at the primary documentation for [Customizing Your Keymap](/readme.md##customizing-your-keymap) in the main readme.md.
Some features supported by the firmware: ### DeltaSplit75 V2
The PCBs available in groupbuy are all v2, if you've bought one of my prototype PCBs (it says DeltaSplit65 on the silkscreen instead of 75), use the code make ProtoSplit-ProtoSplit instead
* Either half can connect to the computer via USB, or both halves can be used
independently. Features
* 75% formfactor --------
* Support for multiple Bottom Rows
* RGB underglow support For the full Quantum Mechanical Keyboard feature list, see [the parent readme.md](/readme.md).
* Split Backspace and ISO support
Some features supported by the firmware:
Flashing * Either half can connect to the computer via USB, or both halves can be used
------- independently.
I personally use xLoader to upload my hex files to the keyboard, though any other working software is fine too * 75% formfactor
* Support for multiple Bottom Rows
* RGB underglow support
Choosing which board to plug the USB cable into (choosing Master) * Split Backspace and ISO support
--------
Because the two boards are identical, the firmware has logic to differentiate the left and right board.
Flashing
It uses two strategies to figure things out: look at the EEPROM (memory on the chip) or looks if the current board has the usb cable. -------
I personally use xLoader to upload my hex files to the keyboard, though any other working software is fine too
The EEPROM approach requires additional setup (flashing the eeeprom) but allows you to swap the usb cable to either side.
The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra. Choosing which board to plug the USB cable into (choosing Master)
--------
### Setting the left hand as master Because the two boards are identical, the firmware has logic to differentiate the left and right board.
If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out `EE_HANDS` and comment out `I2C_MASTER_RIGHT` or `MASTER_RIGHT` if for some reason it was set.
It uses two strategies to figure things out: look at the EEPROM (memory on the chip) or looks if the current board has the usb cable.
### Setting the right hand as master
If you always plug the usb cable into the right board, add an extra flag to your `config.h` The EEPROM approach requires additional setup (flashing the eeeprom) but allows you to swap the usb cable to either side.
```
#define MASTER_RIGHT The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra.
```
### Setting the left hand as master
### Setting EE_hands to use either hands as master If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out `EE_HANDS` and comment out `I2C_MASTER_RIGHT` or `MASTER_RIGHT` if for some reason it was set.
If you define `EE_HANDS` in your `config.h`, you will need to set the
EEPROM for the left and right halves. ### Setting the right hand as master
If you always plug the usb cable into the right board, add an extra flag to your `config.h`
The EEPROM is used to store whether the ```
half is left handed or right handed. This makes it so that the same firmware #define MASTER_RIGHT
file will run on both hands instead of having to flash left and right handed ```
versions of the firmware to each half. To flash the EEPROM file for the left
half run: ### Setting EE_hands to use either hands as master
``` If you define `EE_HANDS` in your `config.h`, you will need to set the
avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-lefthand.eep EEPROM for the left and right halves.
// or the equivalent in dfu-programmer
The EEPROM is used to store whether the
``` half is left handed or right handed. This makes it so that the same firmware
and similarly for right half file will run on both hands instead of having to flash left and right handed
``` versions of the firmware to each half. To flash the EEPROM file for the left
avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-righhand.eep half run:
// or the equivalent in dfu-programmer ```
``` avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-lefthand.eep
// or the equivalent in dfu-programmer
NOTE: replace `$(COM_PORT)` with the port of your device (e.g. `/dev/ttyACM0`)
```
After you have flashed the EEPROM, you then need to set `EE_HANDS` in your config.h, rebuild the hex files and reflash. and similarly for right half
```
Note that you need to program both halves, but you have the option of using avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-righhand.eep
different keymaps for each half. You could program the left half with a QWERTY // or the equivalent in dfu-programmer
layout and the right half with a Colemak layout using bootmagic's default layout option. ```
Then if you connect the left half to a computer by USB the keyboard will use QWERTY and Colemak when the
right half is connected. NOTE: replace `$(COM_PORT)` with the port of your device (e.g. `/dev/ttyACM0`)
After you have flashed the EEPROM, you then need to set `EE_HANDS` in your config.h, rebuild the hex files and reflash.
Notes on Using Pro Micro 3.3V
----------------------------- Note that you need to program both halves, but you have the option of using
different keymaps for each half. You could program the left half with a QWERTY
Do update the `F_CPU` parameter in `rules.mk` to `8000000` which reflects layout and the right half with a Colemak layout using bootmagic's default layout option.
the frequency on the 3.3V board. Then if you connect the left half to a computer by USB the keyboard will use QWERTY and Colemak when the
right half is connected.
Also, if the slave board is producing weird characters in certain columns,
update the following line in `matrix.c` to the following:
Notes on Using Pro Micro 3.3V
``` -----------------------------
// _delay_us(30); // without this wait read unstable value.
_delay_us(300); // without this wait read unstable value. Do update the `F_CPU` parameter in `rules.mk` to `8000000` which reflects
``` the frequency on the 3.3V board.
Also, if the slave board is producing weird characters in certain columns,
update the following line in `matrix.c` to the following:
```
// _delay_us(30); // without this wait read unstable value.
_delay_us(300); // without this wait read unstable value.
```

Write Preview
Loading…
Cancel
Save