[Keyboard] Leaf60 hotswap and universal pcb (#5882)
* initial commit * copy paste with some fixes the code from fox lab leaf60 repo * add 60_ansi and 60_hhkb and community layout support * add QMK Configurator support * turn bootmagic to lite and turn on rgb and backlights * disable some features so firmware isn't too big * initial commit for hotswap leaf60 * add hotswap support * edits for consistency * add a generic leaf60 readme * turn off console and command to save firmware space * not enabling sleep led enable * not enabling sleep led enable * had one extra key in 60_hhkb * get rid of limit val define * Update keyboards/foxlab/leaf60/hotswap/readme.md Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/foxlab/leaf60/hotswap/rules.mk Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/foxlab/leaf60/universal/rules.mk Co-Authored-By: fauxpark <fauxpark@gmail.com>planck_thk^2
MechMerlin
6 years ago
committed by
Drashna Jaelre
parent
b541369c45
commit
a8af694d26
@ -0,0 +1,229 @@ |
|||||||
|
/*
|
||||||
|
Copyright 2019 Fox Lab |
||||||
|
|
||||||
|
This program is free software: you can redistribute it and/or modify |
||||||
|
it under the terms of the GNU General Public License as published by |
||||||
|
the Free Software Foundation, either version 2 of the License, or |
||||||
|
(at your option) any later version. |
||||||
|
|
||||||
|
This program is distributed in the hope that it will be useful, |
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||||
|
GNU General Public License for more details. |
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License |
||||||
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/ |
||||||
|
|
||||||
|
#pragma once |
||||||
|
|
||||||
|
#include "config_common.h" |
||||||
|
|
||||||
|
/* USB Device descriptor parameter */ |
||||||
|
#define VENDOR_ID 0xFEED |
||||||
|
#define PRODUCT_ID 0x0000 |
||||||
|
#define DEVICE_VER 0x0001 |
||||||
|
#define MANUFACTURER Fox Lab |
||||||
|
#define PRODUCT Leaf60 Hotswap |
||||||
|
#define DESCRIPTION A custom hotswap 60% keyboard |
||||||
|
|
||||||
|
/* key matrix size */ |
||||||
|
#define MATRIX_ROWS 5 |
||||||
|
#define MATRIX_COLS 15 |
||||||
|
|
||||||
|
/*
|
||||||
|
* Keyboard Matrix Assignments |
||||||
|
* |
||||||
|
* Change this to how you wired your keyboard |
||||||
|
* COLS: AVR pins used for columns, left to right |
||||||
|
* ROWS: AVR pins used for rows, top to bottom |
||||||
|
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) |
||||||
|
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) |
||||||
|
* |
||||||
|
*/ |
||||||
|
#define MATRIX_ROW_PINS { D2, D1, D0, D3, D5 } |
||||||
|
#define MATRIX_COL_PINS { F5, F4, F1, F0, B0, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4 } |
||||||
|
#define UNUSED_PINS |
||||||
|
|
||||||
|
/* COL2ROW, ROW2COL*/ |
||||||
|
#define DIODE_DIRECTION COL2ROW |
||||||
|
|
||||||
|
#define BACKLIGHT_PIN B7 |
||||||
|
#define BACKLIGHT_BREATHING |
||||||
|
#define BACKLIGHT_LEVELS 4 |
||||||
|
|
||||||
|
#define RGB_DI_PIN E2 |
||||||
|
#ifdef RGB_DI_PIN |
||||||
|
#define RGBLED_NUM 8 |
||||||
|
#define RGBLIGHT_HUE_STEP 8 |
||||||
|
#define RGBLIGHT_SAT_STEP 8 |
||||||
|
#define RGBLIGHT_VAL_STEP 8 |
||||||
|
#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ |
||||||
|
/*== all animations enable ==*/ |
||||||
|
#define RGBLIGHT_ANIMATIONS |
||||||
|
#endif |
||||||
|
|
||||||
|
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ |
||||||
|
#define DEBOUNCING_DELAY 5 |
||||||
|
|
||||||
|
/* define if matrix has ghost (lacks anti-ghosting diodes) */ |
||||||
|
//#define MATRIX_HAS_GHOST
|
||||||
|
|
||||||
|
/* number of backlight levels */ |
||||||
|
|
||||||
|
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ |
||||||
|
#define LOCKING_SUPPORT_ENABLE |
||||||
|
/* Locking resynchronize hack */ |
||||||
|
#define LOCKING_RESYNC_ENABLE |
||||||
|
|
||||||
|
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
|
||||||
|
* This is userful for the Windows task manager shortcut (ctrl+shift+esc). |
||||||
|
*/ |
||||||
|
// #define GRAVE_ESC_CTRL_OVERRIDE
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Force NKRO |
||||||
|
* |
||||||
|
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved |
||||||
|
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the |
||||||
|
* makefile for this to work.) |
||||||
|
* |
||||||
|
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) |
||||||
|
* until the next keyboard reset. |
||||||
|
* |
||||||
|
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is |
||||||
|
* fully operational during normal computer usage. |
||||||
|
* |
||||||
|
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) |
||||||
|
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by |
||||||
|
* bootmagic, NKRO mode will always be enabled until it is toggled again during a |
||||||
|
* power-up. |
||||||
|
* |
||||||
|
*/ |
||||||
|
//#define FORCE_NKRO
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Magic Key Options |
||||||
|
* |
||||||
|
* Magic keys are hotkey commands that allow control over firmware functions of |
||||||
|
* the keyboard. They are best used in combination with the HID Listen program, |
||||||
|
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
||||||
|
* |
||||||
|
* The options below allow the magic key functionality to be changed. This is |
||||||
|
* useful if your keyboard/keypad is missing keys and you want magic key support. |
||||||
|
* |
||||||
|
*/ |
||||||
|
|
||||||
|
/* key combination for magic key command */ |
||||||
|
/* defined by default; to change, uncomment and set to the combination you want */ |
||||||
|
// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
|
||||||
|
|
||||||
|
/* control how magic key switches layers */ |
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
||||||
|
|
||||||
|
/* override magic key keymap */ |
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
||||||
|
//#define MAGIC_KEY_HELP H
|
||||||
|
//#define MAGIC_KEY_HELP_ALT SLASH
|
||||||
|
//#define MAGIC_KEY_DEBUG D
|
||||||
|
//#define MAGIC_KEY_DEBUG_MATRIX X
|
||||||
|
//#define MAGIC_KEY_DEBUG_KBD K
|
||||||
|
//#define MAGIC_KEY_DEBUG_MOUSE M
|
||||||
|
//#define MAGIC_KEY_VERSION V
|
||||||
|
//#define MAGIC_KEY_STATUS S
|
||||||
|
//#define MAGIC_KEY_CONSOLE C
|
||||||
|
//#define MAGIC_KEY_LAYER0 0
|
||||||
|
//#define MAGIC_KEY_LAYER0_ALT GRAVE
|
||||||
|
//#define MAGIC_KEY_LAYER1 1
|
||||||
|
//#define MAGIC_KEY_LAYER2 2
|
||||||
|
//#define MAGIC_KEY_LAYER3 3
|
||||||
|
//#define MAGIC_KEY_LAYER4 4
|
||||||
|
//#define MAGIC_KEY_LAYER5 5
|
||||||
|
//#define MAGIC_KEY_LAYER6 6
|
||||||
|
//#define MAGIC_KEY_LAYER7 7
|
||||||
|
//#define MAGIC_KEY_LAYER8 8
|
||||||
|
//#define MAGIC_KEY_LAYER9 9
|
||||||
|
//#define MAGIC_KEY_BOOTLOADER B
|
||||||
|
//#define MAGIC_KEY_BOOTLOADER_ALT ESC
|
||||||
|
//#define MAGIC_KEY_LOCK CAPS
|
||||||
|
//#define MAGIC_KEY_EEPROM E
|
||||||
|
//#define MAGIC_KEY_EEPROM_CLEAR BSPACE
|
||||||
|
//#define MAGIC_KEY_NKRO N
|
||||||
|
//#define MAGIC_KEY_SLEEP_LED Z
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Feature disable options |
||||||
|
* These options are also useful to firmware size reduction. |
||||||
|
*/ |
||||||
|
|
||||||
|
/* disable debug print */ |
||||||
|
//#define NO_DEBUG
|
||||||
|
|
||||||
|
/* disable print */ |
||||||
|
//#define NO_PRINT
|
||||||
|
|
||||||
|
/* disable action features */ |
||||||
|
//#define NO_ACTION_LAYER
|
||||||
|
//#define NO_ACTION_TAPPING
|
||||||
|
//#define NO_ACTION_ONESHOT
|
||||||
|
//#define NO_ACTION_MACRO
|
||||||
|
//#define NO_ACTION_FUNCTION
|
||||||
|
|
||||||
|
/*
|
||||||
|
* MIDI options |
||||||
|
*/ |
||||||
|
|
||||||
|
/* Prevent use of disabled MIDI features in the keymap */ |
||||||
|
//#define MIDI_ENABLE_STRICT 1
|
||||||
|
|
||||||
|
/* enable basic MIDI features:
|
||||||
|
- MIDI notes can be sent when in Music mode is on |
||||||
|
*/ |
||||||
|
//#define MIDI_BASIC
|
||||||
|
|
||||||
|
/* enable advanced MIDI features:
|
||||||
|
- MIDI notes can be added to the keymap |
||||||
|
- Octave shift and transpose |
||||||
|
- Virtual sustain, portamento, and modulation wheel |
||||||
|
- etc. |
||||||
|
*/ |
||||||
|
//#define MIDI_ADVANCED
|
||||||
|
|
||||||
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ |
||||||
|
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||||
|
|
||||||
|
/*
|
||||||
|
* HD44780 LCD Display Configuration |
||||||
|
*/ |
||||||
|
/*
|
||||||
|
#define LCD_LINES 2 //< number of visible lines of the display
|
||||||
|
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
|
||||||
|
|
||||||
|
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
|
||||||
|
|
||||||
|
#if LCD_IO_MODE |
||||||
|
#define LCD_PORT PORTB //< port for the LCD lines
|
||||||
|
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
|
||||||
|
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
|
||||||
|
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
|
||||||
|
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
|
||||||
|
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
|
||||||
|
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
|
||||||
|
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
|
||||||
|
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
|
||||||
|
#define LCD_RS_PORT LCD_PORT //< port for RS line
|
||||||
|
#define LCD_RS_PIN 3 //< pin for RS line
|
||||||
|
#define LCD_RW_PORT LCD_PORT //< port for RW line
|
||||||
|
#define LCD_RW_PIN 2 //< pin for RW line
|
||||||
|
#define LCD_E_PORT LCD_PORT //< port for Enable line
|
||||||
|
#define LCD_E_PIN 1 //< pin for Enable line
|
||||||
|
#endif |
||||||
|
*/ |
||||||
|
|
||||||
|
/* Bootmagic Lite key configuration */ |
||||||
|
// #define BOOTMAGIC_LITE_ROW 0
|
||||||
|
// #define BOOTMAGIC_LITE_COLUMN 0
|
||||||
@ -0,0 +1,59 @@ |
|||||||
|
/* Copyright 2019 Fox Lab
|
||||||
|
* |
||||||
|
* This program is free software: you can redistribute it and/or modify |
||||||
|
* it under the terms of the GNU General Public License as published by |
||||||
|
* the Free Software Foundation, either version 2 of the License, or |
||||||
|
* (at your option) any later version. |
||||||
|
* |
||||||
|
* This program is distributed in the hope that it will be useful, |
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||||
|
* GNU General Public License for more details. |
||||||
|
* |
||||||
|
* You should have received a copy of the GNU General Public License |
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/ |
||||||
|
#include "hotswap.h" |
||||||
|
|
||||||
|
// Optional override functions below.
|
||||||
|
// You can leave any or all of these undefined.
|
||||||
|
// These are only required if you want to perform custom actions.
|
||||||
|
|
||||||
|
void matrix_init_kb(void) { |
||||||
|
// put your keyboard start-up code here
|
||||||
|
// runs once when the firmware starts up
|
||||||
|
setPinOutput(E6); |
||||||
|
matrix_init_user(); |
||||||
|
} |
||||||
|
/*
|
||||||
|
|
||||||
|
void matrix_scan_kb(void) { |
||||||
|
// put your looping keyboard code here
|
||||||
|
// runs every cycle (a lot)
|
||||||
|
|
||||||
|
matrix_scan_user(); |
||||||
|
} |
||||||
|
|
||||||
|
bool process_record_kb(uint16_t keycode, keyrecord_t *record) { |
||||||
|
// put your per-action keyboard code here
|
||||||
|
// runs for every action, just before processing by the firmware
|
||||||
|
|
||||||
|
return process_record_user(keycode, record); |
||||||
|
} |
||||||
|
|
||||||
|
void led_set_kb(uint8_t usb_led) { |
||||||
|
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
|
||||||
|
|
||||||
|
led_set_user(usb_led); |
||||||
|
} |
||||||
|
|
||||||
|
*/ |
||||||
|
|
||||||
|
void led_set_kb(uint8_t usb_led) { |
||||||
|
if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { |
||||||
|
writePinLow(E6); |
||||||
|
} else { |
||||||
|
writePinHigh(E6); |
||||||
|
} |
||||||
|
led_set_user(usb_led); |
||||||
|
} |
||||||
@ -0,0 +1,40 @@ |
|||||||
|
/* Copyright 2019 Fox Lab
|
||||||
|
* |
||||||
|
* This program is free software: you can redistribute it and/or modify |
||||||
|
* it under the terms of the GNU General Public License as published by |
||||||
|
* the Free Software Foundation, either version 2 of the License, or |
||||||
|
* (at your option) any later version. |
||||||
|
* |
||||||
|
* This program is distributed in the hope that it will be useful, |
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||||
|
* GNU General Public License for more details. |
||||||
|
* |
||||||
|
* You should have received a copy of the GNU General Public License |
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/ |
||||||
|
#pragma once |
||||||
|
|
||||||
|
#include "quantum.h" |
||||||
|
|
||||||
|
/* This a shortcut to help you visually see your layout.
|
||||||
|
* |
||||||
|
* The first section contains all of the arguments representing the physical |
||||||
|
* layout of the board and position of the keys. |
||||||
|
* |
||||||
|
* The second converts the arguments into a two-dimensional array which |
||||||
|
* represents the switch matrix. |
||||||
|
*/ |
||||||
|
#define LAYOUT_60_tsangan_hhkb( \ |
||||||
|
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
|
||||||
|
K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, \
|
||||||
|
K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, \
|
||||||
|
K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, \
|
||||||
|
K400, K401, K402, K407, K411, K412, K413 \
|
||||||
|
) { \
|
||||||
|
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \
|
||||||
|
{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, KC_NO }, \
|
||||||
|
{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, KC_NO, KC_NO }, \
|
||||||
|
{ K300, KC_NO, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, KC_NO }, \
|
||||||
|
{ K400, K401, K402, KC_NO, KC_NO, KC_NO, KC_NO, K407, KC_NO, KC_NO, KC_NO, K411, K412, K413, KC_NO } \
|
||||||
|
} |
||||||
@ -0,0 +1,12 @@ |
|||||||
|
{ |
||||||
|
"keyboard_name": "Fox Lab Hotswap Leaf60", |
||||||
|
"url": "", |
||||||
|
"maintainer": "qmk", |
||||||
|
"width": 15, |
||||||
|
"height": 5, |
||||||
|
"layouts": { |
||||||
|
"LAYOUT_60_tsangan_hhkb": { |
||||||
|
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":0, "y":4, "w":1.5}, {"x":1.5, "y":4}, {"x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"x":11, "y":4, "w":1.5}, {"x":12.5, "y":4}, {"x":13.5, "y":4, "w":1.5}] |
||||||
|
} |
||||||
|
} |
||||||
|
} |
||||||
@ -0,0 +1,19 @@ |
|||||||
|
/* Copyright 2019 MechMerlin
|
||||||
|
* |
||||||
|
* This program is free software: you can redistribute it and/or modify |
||||||
|
* it under the terms of the GNU General Public License as published by |
||||||
|
* the Free Software Foundation, either version 2 of the License, or |
||||||
|
* (at your option) any later version. |
||||||
|
* |
||||||
|
* This program is distributed in the hope that it will be useful, |
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||||
|
* GNU General Public License for more details. |
||||||
|
* |
||||||
|
* You should have received a copy of the GNU General Public License |
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/ |
||||||
|
|
||||||
|
#pragma once |
||||||
|
|
||||||
|
// place overrides here
|
||||||
@ -0,0 +1,46 @@ |
|||||||
|
/* Copyright 2019 Fox Lab
|
||||||
|
* |
||||||
|
* This program is free software: you can redistribute it and/or modify |
||||||
|
* it under the terms of the GNU General Public License as published by |
||||||
|
* the Free Software Foundation, either version 2 of the License, or |
||||||
|
* (at your option) any later version. |
||||||
|
* |
||||||
|
* This program is distributed in the hope that it will be useful, |
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||||
|
* GNU General Public License for more details. |
||||||
|
* |
||||||
|
* You should have received a copy of the GNU General Public License |
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/ |
||||||
|
#include QMK_KEYBOARD_H |
||||||
|
|
||||||
|
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { |
||||||
|
|
||||||
|
LAYOUT_60_tsangan_hhkb( |
||||||
|
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSLS, |
||||||
|
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,
|
||||||
|
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||||
|
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_DEL,
|
||||||
|
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_RALT, KC_RCTL), |
||||||
|
|
||||||
|
LAYOUT_60_tsangan_hhkb( |
||||||
|
RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, BL_TOGG, BL_DEC, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) |
||||||
|
|
||||||
|
}; |
||||||
|
|
||||||
|
void matrix_init_user(void) { |
||||||
|
|
||||||
|
} |
||||||
|
|
||||||
|
void matrix_scan_user(void) { |
||||||
|
|
||||||
|
} |
||||||
|
|
||||||
|
void led_set_user(uint8_t usb_led) { |
||||||
|
|
||||||
|
} |
||||||
@ -0,0 +1 @@ |
|||||||
|
# The default keymap for Fox Lab Hotswap Leaf60 |
||||||
@ -0,0 +1,13 @@ |
|||||||
|
# Fox Lab Hotswap Leaf60 |
||||||
|
|
||||||
|
A hotswap, Tsangan-layout, gasket-mount 60% keyboard. |
||||||
|
|
||||||
|
Keyboard Maintainer: [Fox Lab](https://github.com/fox-lab), [MechMerlin](https://github.com/mechmerlin) |
||||||
|
Hardware Supported: Leaf60 powered by the ATmega32U4 |
||||||
|
Hardware Availability: [Geekhack Group Buy](https://geekhack.org/index.php?topic=99002.0) |
||||||
|
|
||||||
|
Make example for this keyboard (after setting up your build environment): |
||||||
|
|
||||||
|
make foxlab/leaf60/hotswap:default |
||||||
|
|
||||||
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
||||||
@ -0,0 +1,80 @@ |
|||||||
|
# MCU name
|
||||||
|
MCU = atmega32u4
|
||||||
|
|
||||||
|
# Processor frequency.
|
||||||
|
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||||
|
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||||
|
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||||
|
# automatically to create a 32-bit value in your source code.
|
||||||
|
#
|
||||||
|
# This will be an integer division of F_USB below, as it is sourced by
|
||||||
|
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||||
|
# does not *change* the processor frequency - it should merely be updated to
|
||||||
|
# reflect the processor speed set externally so that the code can use accurate
|
||||||
|
# software delays.
|
||||||
|
F_CPU = 16000000
|
||||||
|
|
||||||
|
|
||||||
|
#
|
||||||
|
# LUFA specific
|
||||||
|
#
|
||||||
|
# Target architecture (see library "Board Types" documentation).
|
||||||
|
ARCH = AVR8
|
||||||
|
|
||||||
|
# Input clock frequency.
|
||||||
|
# This will define a symbol, F_USB, in all source code files equal to the
|
||||||
|
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||||
|
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||||
|
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||||
|
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||||
|
# at the end, this will be done automatically to create a 32-bit value in your
|
||||||
|
# source code.
|
||||||
|
#
|
||||||
|
# If no clock division is performed on the input clock inside the AVR (via the
|
||||||
|
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||||
|
F_USB = $(F_CPU)
|
||||||
|
|
||||||
|
# Interrupt driven control endpoint task(+60)
|
||||||
|
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||||
|
|
||||||
|
|
||||||
|
# Bootloader selection
|
||||||
|
# Teensy halfkay
|
||||||
|
# Pro Micro caterina
|
||||||
|
# Atmel DFU atmel-dfu
|
||||||
|
# LUFA DFU lufa-dfu
|
||||||
|
# QMK DFU qmk-dfu
|
||||||
|
# atmega32a bootloadHID
|
||||||
|
BOOTLOADER = atmel-dfu
|
||||||
|
|
||||||
|
|
||||||
|
# If you don't know the bootloader type, then you can specify the
|
||||||
|
# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
|
||||||
|
# Teensy halfKay 512
|
||||||
|
# Teensy++ halfKay 1024
|
||||||
|
# Atmel DFU loader 4096
|
||||||
|
# LUFA bootloader 4096
|
||||||
|
# USBaspLoader 2048
|
||||||
|
# OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||||
|
|
||||||
|
|
||||||
|
# Build Options
|
||||||
|
# change yes to no to disable
|
||||||
|
#
|
||||||
|
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
||||||
|
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||||
|
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||||
|
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||||
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
|
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
NKRO_ENABLE = no # USB Nkey Rollover
|
||||||
|
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
|
||||||
|
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
|
||||||
|
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
||||||
|
UNICODE_ENABLE = no # Unicode
|
||||||
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
|
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
||||||
@ -0,0 +1,7 @@ |
|||||||
|
# Fox Lab Leaf60 |
||||||
|
|
||||||
|
The Leaf60 is a 60% gasket mount board sold via [Geekhack Group Buy](https://geekhack.org/index.php?topic=99002.0). |
||||||
|
|
||||||
|
It was available with a universal layout PCB and a hotswap tsangan PCB. |
||||||
|
|
||||||
|
**Firmware generated for one PCB will not work on the other.** |
||||||
@ -0,0 +1,229 @@ |
|||||||
|
/*
|
||||||
|
Copyright 2019 Fox Lab |
||||||
|
|
||||||
|
This program is free software: you can redistribute it and/or modify |
||||||
|
it under the terms of the GNU General Public License as published by |
||||||
|
the Free Software Foundation, either version 2 of the License, or |
||||||
|
(at your option) any later version. |
||||||
|
|
||||||
|
This program is distributed in the hope that it will be useful, |
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||||
|
GNU General Public License for more details. |
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License |
||||||
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/ |
||||||
|
|
||||||
|
#pragma once |
||||||
|
|
||||||
|
#include "config_common.h" |
||||||
|
|
||||||
|
/* USB Device descriptor parameter */ |
||||||
|
#define VENDOR_ID 0xFEED |
||||||
|
#define PRODUCT_ID 0x0000 |
||||||
|
#define DEVICE_VER 0x0001 |
||||||
|
#define MANUFACTURER Fox Lab |
||||||
|
#define PRODUCT Leaf60 Universal |
||||||
|
#define DESCRIPTION A custom 60% keyboard |
||||||
|
|
||||||
|
/* key matrix size */ |
||||||
|
#define MATRIX_ROWS 5 |
||||||
|
#define MATRIX_COLS 15 |
||||||
|
|
||||||
|
/*
|
||||||
|
* Keyboard Matrix Assignments |
||||||
|
* |
||||||
|
* Change this to how you wired your keyboard |
||||||
|
* COLS: AVR pins used for columns, left to right |
||||||
|
* ROWS: AVR pins used for rows, top to bottom |
||||||
|
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) |
||||||
|
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) |
||||||
|
* |
||||||
|
*/ |
||||||
|
#define MATRIX_ROW_PINS { D0, D1, F0, F4, F1 } |
||||||
|
#define MATRIX_COL_PINS { B0, F5, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4, D5, D3, D2 } |
||||||
|
#define UNUSED_PINS |
||||||
|
|
||||||
|
/* COL2ROW, ROW2COL*/ |
||||||
|
#define DIODE_DIRECTION COL2ROW |
||||||
|
|
||||||
|
#define BACKLIGHT_PIN B7 |
||||||
|
#define BACKLIGHT_BREATHING |
||||||
|
#define BACKLIGHT_LEVELS 3 |
||||||
|
|
||||||
|
#define RGB_DI_PIN E2 |
||||||
|
#ifdef RGB_DI_PIN |
||||||
|
#define RGBLED_NUM 8 |
||||||
|
#define RGBLIGHT_HUE_STEP 8 |
||||||
|
#define RGBLIGHT_SAT_STEP 8 |
||||||
|
#define RGBLIGHT_VAL_STEP 8 |
||||||
|
#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ |
||||||
|
/*== all animations enable ==*/ |
||||||
|
#define RGBLIGHT_ANIMATIONS |
||||||
|
#endif |
||||||
|
|
||||||
|
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ |
||||||
|
#define DEBOUNCING_DELAY 5 |
||||||
|
|
||||||
|
/* define if matrix has ghost (lacks anti-ghosting diodes) */ |
||||||
|
//#define MATRIX_HAS_GHOST
|
||||||
|
|
||||||
|
/* number of backlight levels */ |
||||||
|
|
||||||
|
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ |
||||||
|
#define LOCKING_SUPPORT_ENABLE |
||||||
|
/* Locking resynchronize hack */ |
||||||
|
#define LOCKING_RESYNC_ENABLE |
||||||
|
|
||||||
|
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
|
||||||
|
* This is userful for the Windows task manager shortcut (ctrl+shift+esc). |
||||||
|
*/ |
||||||
|
// #define GRAVE_ESC_CTRL_OVERRIDE
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Force NKRO |
||||||
|
* |
||||||
|
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved |
||||||
|
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the |
||||||
|
* makefile for this to work.) |
||||||
|
* |
||||||
|
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) |
||||||
|
* until the next keyboard reset. |
||||||
|
* |
||||||
|
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is |
||||||
|
* fully operational during normal computer usage. |
||||||
|
* |
||||||
|
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) |
||||||
|
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by |
||||||
|
* bootmagic, NKRO mode will always be enabled until it is toggled again during a |
||||||
|
* power-up. |
||||||
|
* |
||||||
|
*/ |
||||||
|
//#define FORCE_NKRO
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Magic Key Options |
||||||
|
* |
||||||
|
* Magic keys are hotkey commands that allow control over firmware functions of |
||||||
|
* the keyboard. They are best used in combination with the HID Listen program, |
||||||
|
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
||||||
|
* |
||||||
|
* The options below allow the magic key functionality to be changed. This is |
||||||
|
* useful if your keyboard/keypad is missing keys and you want magic key support. |
||||||
|
* |
||||||
|
*/ |
||||||
|
|
||||||
|
/* key combination for magic key command */ |
||||||
|
/* defined by default; to change, uncomment and set to the combination you want */ |
||||||
|
// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
|
||||||
|
|
||||||
|
/* control how magic key switches layers */ |
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
||||||
|
|
||||||
|
/* override magic key keymap */ |
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
||||||
|
//#define MAGIC_KEY_HELP H
|
||||||
|
//#define MAGIC_KEY_HELP_ALT SLASH
|
||||||
|
//#define MAGIC_KEY_DEBUG D
|
||||||
|
//#define MAGIC_KEY_DEBUG_MATRIX X
|
||||||
|
//#define MAGIC_KEY_DEBUG_KBD K
|
||||||
|
//#define MAGIC_KEY_DEBUG_MOUSE M
|
||||||
|
//#define MAGIC_KEY_VERSION V
|
||||||
|
//#define MAGIC_KEY_STATUS S
|
||||||
|
//#define MAGIC_KEY_CONSOLE C
|
||||||
|
//#define MAGIC_KEY_LAYER0 0
|
||||||
|
//#define MAGIC_KEY_LAYER0_ALT GRAVE
|
||||||
|
//#define MAGIC_KEY_LAYER1 1
|
||||||
|
//#define MAGIC_KEY_LAYER2 2
|
||||||
|
//#define MAGIC_KEY_LAYER3 3
|
||||||
|
//#define MAGIC_KEY_LAYER4 4
|
||||||
|
//#define MAGIC_KEY_LAYER5 5
|
||||||
|
//#define MAGIC_KEY_LAYER6 6
|
||||||
|
//#define MAGIC_KEY_LAYER7 7
|
||||||
|
//#define MAGIC_KEY_LAYER8 8
|
||||||
|
//#define MAGIC_KEY_LAYER9 9
|
||||||
|
//#define MAGIC_KEY_BOOTLOADER B
|
||||||
|
//#define MAGIC_KEY_BOOTLOADER_ALT ESC
|
||||||
|
//#define MAGIC_KEY_LOCK CAPS
|
||||||
|
//#define MAGIC_KEY_EEPROM E
|
||||||
|
//#define MAGIC_KEY_EEPROM_CLEAR BSPACE
|
||||||
|
//#define MAGIC_KEY_NKRO N
|
||||||
|
//#define MAGIC_KEY_SLEEP_LED Z
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Feature disable options |
||||||
|
* These options are also useful to firmware size reduction. |
||||||
|
*/ |
||||||
|
|
||||||
|
/* disable debug print */ |
||||||
|
//#define NO_DEBUG
|
||||||
|
|
||||||
|
/* disable print */ |
||||||
|
//#define NO_PRINT
|
||||||
|
|
||||||
|
/* disable action features */ |
||||||
|
//#define NO_ACTION_LAYER
|
||||||
|
//#define NO_ACTION_TAPPING
|
||||||
|
//#define NO_ACTION_ONESHOT
|
||||||
|
//#define NO_ACTION_MACRO
|
||||||
|
//#define NO_ACTION_FUNCTION
|
||||||
|
|
||||||
|
/*
|
||||||
|
* MIDI options |
||||||
|
*/ |
||||||
|
|
||||||
|
/* Prevent use of disabled MIDI features in the keymap */ |
||||||
|
//#define MIDI_ENABLE_STRICT 1
|
||||||
|
|
||||||
|
/* enable basic MIDI features:
|
||||||
|
- MIDI notes can be sent when in Music mode is on |
||||||
|
*/ |
||||||
|
//#define MIDI_BASIC
|
||||||
|
|
||||||
|
/* enable advanced MIDI features:
|
||||||
|
- MIDI notes can be added to the keymap |
||||||
|
- Octave shift and transpose |
||||||
|
- Virtual sustain, portamento, and modulation wheel |
||||||
|
- etc. |
||||||
|
*/ |
||||||
|
//#define MIDI_ADVANCED
|
||||||
|
|
||||||
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ |
||||||
|
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||||
|
|
||||||
|
/*
|
||||||
|
* HD44780 LCD Display Configuration |
||||||
|
*/ |
||||||
|
/*
|
||||||
|
#define LCD_LINES 2 //< number of visible lines of the display
|
||||||
|
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
|
||||||
|
|
||||||
|
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
|
||||||
|
|
||||||
|
#if LCD_IO_MODE |
||||||
|
#define LCD_PORT PORTB //< port for the LCD lines
|
||||||
|
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
|
||||||
|
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
|
||||||
|
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
|
||||||
|
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
|
||||||
|
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
|
||||||
|
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
|
||||||
|
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
|
||||||
|
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
|
||||||
|
#define LCD_RS_PORT LCD_PORT //< port for RS line
|
||||||
|
#define LCD_RS_PIN 3 //< pin for RS line
|
||||||
|
#define LCD_RW_PORT LCD_PORT //< port for RW line
|
||||||
|
#define LCD_RW_PIN 2 //< pin for RW line
|
||||||
|
#define LCD_E_PORT LCD_PORT //< port for Enable line
|
||||||
|
#define LCD_E_PIN 1 //< pin for Enable line
|
||||||
|
#endif |
||||||
|
*/ |
||||||
|
|
||||||
|
/* Bootmagic Lite key configuration */ |
||||||
|
// #define BOOTMAGIC_LITE_ROW 0
|
||||||
|
// #define BOOTMAGIC_LITE_COLUMN 0
|
||||||
@ -0,0 +1,20 @@ |
|||||||
|
{ |
||||||
|
"keyboard_name": "Fox Lab Leaf60", |
||||||
|
"url": "", |
||||||
|
"maintainer": "qmk", |
||||||
|
"width": 15, |
||||||
|
"height": 5, |
||||||
|
"layouts": { |
||||||
|
"LAYOUT_all": { |
||||||
|
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.25}, {"x":6, "y":4, "w":1.25}, {"x":7.25, "y":4, "w":2.75}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":12.5, "y":4, "w":1.25}, {"x":13.75, "y":4, "w":1.25}] |
||||||
|
}, |
||||||
|
|
||||||
|
"LAYOUT_60_ansi": { |
||||||
|
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":2.75}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":12.5, "y":4, "w":1.25}, {"x":13.75, "y":4, "w":1.25}] |
||||||
|
}, |
||||||
|
|
||||||
|
"LAYOUT_60_hhkb": { |
||||||
|
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":1.5, "y":4}, {"x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"x":11, "y":4, "w":1.5}, {"x":12.5, "y":4}] |
||||||
|
} |
||||||
|
} |
||||||
|
} |
||||||
@ -0,0 +1,19 @@ |
|||||||
|
/* Copyright 2019 Fox Lab
|
||||||
|
* |
||||||
|
* This program is free software: you can redistribute it and/or modify |
||||||
|
* it under the terms of the GNU General Public License as published by |
||||||
|
* the Free Software Foundation, either version 2 of the License, or |
||||||
|
* (at your option) any later version. |
||||||
|
* |
||||||
|
* This program is distributed in the hope that it will be useful, |
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||||
|
* GNU General Public License for more details. |
||||||
|
* |
||||||
|
* You should have received a copy of the GNU General Public License |
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/ |
||||||
|
|
||||||
|
#pragma once |
||||||
|
|
||||||
|
// place overrides here
|
||||||
@ -0,0 +1,46 @@ |
|||||||
|
/* Copyright 2019 Fox Lab
|
||||||
|
* |
||||||
|
* This program is free software: you can redistribute it and/or modify |
||||||
|
* it under the terms of the GNU General Public License as published by |
||||||
|
* the Free Software Foundation, either version 2 of the License, or |
||||||
|
* (at your option) any later version. |
||||||
|
* |
||||||
|
* This program is distributed in the hope that it will be useful, |
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||||
|
* GNU General Public License for more details. |
||||||
|
* |
||||||
|
* You should have received a copy of the GNU General Public License |
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/ |
||||||
|
#include QMK_KEYBOARD_H |
||||||
|
|
||||||
|
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { |
||||||
|
|
||||||
|
LAYOUT_all( |
||||||
|
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, |
||||||
|
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,
|
||||||
|
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
|
||||||
|
KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_DEL,
|
||||||
|
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_RGUI, KC_RCTL), |
||||||
|
|
||||||
|
LAYOUT_all( |
||||||
|
RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, BL_TOGG, BL_DEC, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) |
||||||
|
|
||||||
|
}; |
||||||
|
|
||||||
|
void matrix_init_user(void) { |
||||||
|
|
||||||
|
} |
||||||
|
|
||||||
|
void matrix_scan_user(void) { |
||||||
|
|
||||||
|
} |
||||||
|
|
||||||
|
void led_set_user(uint8_t usb_led) { |
||||||
|
|
||||||
|
} |
||||||
@ -0,0 +1 @@ |
|||||||
|
# The default keymap for Universal Leaf60 |
||||||
@ -0,0 +1,13 @@ |
|||||||
|
# Fox Lab Leaf60 |
||||||
|
|
||||||
|
A 60% gasket sandwich made by Fox Lab. |
||||||
|
|
||||||
|
Keyboard Maintainer: [Fox Lab](https://github.com/fox-lab), [MechMerlin](https://github.com/mechmerlin) |
||||||
|
Hardware Supported: Leaf60 powered by the ATmega32U4 |
||||||
|
Hardware Availability: [Geekhack Group Buy](https://geekhack.org/index.php?topic=99002.0) |
||||||
|
|
||||||
|
Make example for this keyboard (after setting up your build environment): |
||||||
|
|
||||||
|
make foxlab/leaf60/universal:default |
||||||
|
|
||||||
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
||||||
@ -0,0 +1,82 @@ |
|||||||
|
# MCU name
|
||||||
|
MCU = atmega32u4
|
||||||
|
|
||||||
|
# Processor frequency.
|
||||||
|
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||||
|
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||||
|
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||||
|
# automatically to create a 32-bit value in your source code.
|
||||||
|
#
|
||||||
|
# This will be an integer division of F_USB below, as it is sourced by
|
||||||
|
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||||
|
# does not *change* the processor frequency - it should merely be updated to
|
||||||
|
# reflect the processor speed set externally so that the code can use accurate
|
||||||
|
# software delays.
|
||||||
|
F_CPU = 16000000
|
||||||
|
|
||||||
|
|
||||||
|
#
|
||||||
|
# LUFA specific
|
||||||
|
#
|
||||||
|
# Target architecture (see library "Board Types" documentation).
|
||||||
|
ARCH = AVR8
|
||||||
|
|
||||||
|
# Input clock frequency.
|
||||||
|
# This will define a symbol, F_USB, in all source code files equal to the
|
||||||
|
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||||
|
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||||
|
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||||
|
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||||
|
# at the end, this will be done automatically to create a 32-bit value in your
|
||||||
|
# source code.
|
||||||
|
#
|
||||||
|
# If no clock division is performed on the input clock inside the AVR (via the
|
||||||
|
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||||
|
F_USB = $(F_CPU)
|
||||||
|
|
||||||
|
# Interrupt driven control endpoint task(+60)
|
||||||
|
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||||
|
|
||||||
|
|
||||||
|
# Bootloader selection
|
||||||
|
# Teensy halfkay
|
||||||
|
# Pro Micro caterina
|
||||||
|
# Atmel DFU atmel-dfu
|
||||||
|
# LUFA DFU lufa-dfu
|
||||||
|
# QMK DFU qmk-dfu
|
||||||
|
# atmega32a bootloadHID
|
||||||
|
BOOTLOADER = atmel-dfu
|
||||||
|
|
||||||
|
|
||||||
|
# If you don't know the bootloader type, then you can specify the
|
||||||
|
# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
|
||||||
|
# Teensy halfKay 512
|
||||||
|
# Teensy++ halfKay 1024
|
||||||
|
# Atmel DFU loader 4096
|
||||||
|
# LUFA bootloader 4096
|
||||||
|
# USBaspLoader 2048
|
||||||
|
# OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||||
|
|
||||||
|
|
||||||
|
# Build Options
|
||||||
|
# change yes to no to disable
|
||||||
|
#
|
||||||
|
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
|
||||||
|
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||||
|
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||||
|
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||||
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
|
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
NKRO_ENABLE = no # USB Nkey Rollover
|
||||||
|
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
|
||||||
|
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
|
||||||
|
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
||||||
|
UNICODE_ENABLE = no # Unicode
|
||||||
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
|
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
||||||
|
|
||||||
|
LAYOUTS = 60_ansi 60_hhkb
|
||||||
@ -0,0 +1,61 @@ |
|||||||
|
/* Copyright 2019 Fox Lab
|
||||||
|
* |
||||||
|
* This program is free software: you can redistribute it and/or modify |
||||||
|
* it under the terms of the GNU General Public License as published by |
||||||
|
* the Free Software Foundation, either version 2 of the License, or |
||||||
|
* (at your option) any later version. |
||||||
|
* |
||||||
|
* This program is distributed in the hope that it will be useful, |
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||||
|
* GNU General Public License for more details. |
||||||
|
* |
||||||
|
* You should have received a copy of the GNU General Public License |
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/ |
||||||
|
#include "universal.h" |
||||||
|
|
||||||
|
// Optional override functions below.
|
||||||
|
// You can leave any or all of these undefined.
|
||||||
|
// These are only required if you want to perform custom actions.
|
||||||
|
|
||||||
|
void matrix_init_kb(void) { |
||||||
|
// put your keyboard start-up code here
|
||||||
|
// runs once when the firmware starts up
|
||||||
|
setPinOutput(E6); |
||||||
|
matrix_init_user(); |
||||||
|
} |
||||||
|
|
||||||
|
/*
|
||||||
|
|
||||||
|
void matrix_scan_kb(void) { |
||||||
|
// put your looping keyboard code here
|
||||||
|
// runs every cycle (a lot)
|
||||||
|
|
||||||
|
matrix_scan_user(); |
||||||
|
} |
||||||
|
|
||||||
|
bool process_record_kb(uint16_t keycode, keyrecord_t *record) { |
||||||
|
// put your per-action keyboard code here
|
||||||
|
// runs for every action, just before processing by the firmware
|
||||||
|
|
||||||
|
return process_record_user(keycode, record); |
||||||
|
} |
||||||
|
|
||||||
|
void led_set_kb(uint8_t usb_led) { |
||||||
|
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
|
||||||
|
|
||||||
|
led_set_user(usb_led); |
||||||
|
} |
||||||
|
|
||||||
|
*/ |
||||||
|
|
||||||
|
|
||||||
|
void led_set_kb(uint8_t usb_led) { |
||||||
|
if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { |
||||||
|
writePinLow(E6); |
||||||
|
} else { |
||||||
|
writePinHigh(E6); |
||||||
|
} |
||||||
|
led_set_user(usb_led); |
||||||
|
} |
||||||
@ -0,0 +1,68 @@ |
|||||||
|
/* Copyright 2019 Fox Lab
|
||||||
|
* |
||||||
|
* This program is free software: you can redistribute it and/or modify |
||||||
|
* it under the terms of the GNU General Public License as published by |
||||||
|
* the Free Software Foundation, either version 2 of the License, or |
||||||
|
* (at your option) any later version. |
||||||
|
* |
||||||
|
* This program is distributed in the hope that it will be useful, |
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||||
|
* GNU General Public License for more details. |
||||||
|
* |
||||||
|
* You should have received a copy of the GNU General Public License |
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/ |
||||||
|
#pragma once |
||||||
|
|
||||||
|
#include "quantum.h" |
||||||
|
|
||||||
|
/* This a shortcut to help you visually see your layout.
|
||||||
|
* |
||||||
|
* The first section contains all of the arguments representing the physical |
||||||
|
* layout of the board and position of the keys. |
||||||
|
* |
||||||
|
* The second converts the arguments into a two-dimensional array which |
||||||
|
* represents the switch matrix. |
||||||
|
*/ |
||||||
|
#define LAYOUT_all( \ |
||||||
|
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
|
||||||
|
K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, \
|
||||||
|
K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K213, \
|
||||||
|
K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, \
|
||||||
|
K400, K401, K402, K404, K406, K408, K410, K411, K412, K413 \
|
||||||
|
) { \
|
||||||
|
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \
|
||||||
|
{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, KC_NO }, \
|
||||||
|
{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, KC_NO, K213, KC_NO }, \
|
||||||
|
{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, KC_NO }, \
|
||||||
|
{ K400, K401, K402, KC_NO, K404, KC_NO, K406, KC_NO, K408, KC_NO, K410, K411, K412, K413, KC_NO } \
|
||||||
|
} |
||||||
|
|
||||||
|
#define LAYOUT_60_ansi( \ |
||||||
|
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, \
|
||||||
|
K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, \
|
||||||
|
K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K213, \
|
||||||
|
K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, \
|
||||||
|
K400, K401, K402, K406, K410, K411, K412, K413 \
|
||||||
|
) { \
|
||||||
|
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, KC_NO, K014 }, \
|
||||||
|
{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, KC_NO }, \
|
||||||
|
{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, KC_NO, K213, KC_NO }, \
|
||||||
|
{ K300, KC_NO, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, KC_NO, KC_NO }, \
|
||||||
|
{ K400, K401, K402, KC_NO, KC_NO, KC_NO, K406, KC_NO, KC_NO, KC_NO, K410, K411, K412, K413, KC_NO } \
|
||||||
|
} |
||||||
|
|
||||||
|
#define LAYOUT_60_hhkb( \ |
||||||
|
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \
|
||||||
|
K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, \
|
||||||
|
K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K213, \
|
||||||
|
K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, \
|
||||||
|
K401, K402, K406, K410, K411 \
|
||||||
|
) { \
|
||||||
|
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \
|
||||||
|
{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, KC_NO }, \
|
||||||
|
{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, KC_NO, K213, KC_NO }, \
|
||||||
|
{ K300, KC_NO, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, KC_NO }, \
|
||||||
|
{ KC_NO, K401, K402, KC_NO, KC_NO, KC_NO, K406, KC_NO, KC_NO, KC_NO, K410, K411, KC_NO, KC_NO, KC_NO } \
|
||||||
|
} |
||||||
Loading…
Reference in new issue