tmk
15 years ago
commit
ac3134ffeb
@ -0,0 +1,614 @@ |
||||
# Hey Emacs, this is a -*- makefile -*-
|
||||
#----------------------------------------------------------------------------
|
||||
# WinAVR Makefile Template written by Eric B. Weddington, Jörg Wunsch, et al.
|
||||
#
|
||||
# Released to the Public Domain
|
||||
#
|
||||
# Additional material for this makefile was written by:
|
||||
# Peter Fleury
|
||||
# Tim Henigan
|
||||
# Colin O'Flynn
|
||||
# Reiner Patommel
|
||||
# Markus Pfaff
|
||||
# Sander Pool
|
||||
# Frederik Rouleau
|
||||
# Carlos Lamas
|
||||
#
|
||||
#----------------------------------------------------------------------------
|
||||
# On command line:
|
||||
#
|
||||
# make all = Make software.
|
||||
#
|
||||
# make clean = Clean out built project files.
|
||||
#
|
||||
# make coff = Convert ELF to AVR COFF.
|
||||
#
|
||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
||||
#
|
||||
# make program = Download the hex file to the device, using avrdude.
|
||||
# Please customize the avrdude settings below first!
|
||||
#
|
||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
||||
# with avr-gdb or avr-insight as the front end for debugging.
|
||||
#
|
||||
# make filename.s = Just compile filename.c into the assembler code only.
|
||||
#
|
||||
# make filename.i = Create a preprocessed source file for use in submitting
|
||||
# bug reports to the GCC project.
|
||||
#
|
||||
# To rebuild project do "make clean" then "make all".
|
||||
#----------------------------------------------------------------------------
|
||||
|
||||
|
||||
# Target file name (without extension).
|
||||
TARGET = example
|
||||
|
||||
|
||||
# List C source files here. (C dependencies are automatically generated.)
|
||||
SRC = $(TARGET).c \
|
||||
usb_keyboard_debug.c \
|
||||
print.c
|
||||
|
||||
|
||||
# MCU name, you MUST set this to match the board you are using
|
||||
# type "make clean" after changing this, so all files will be rebuilt
|
||||
#MCU = at90usb162 # Teensy 1.0
|
||||
MCU = atmega32u4 # Teensy 2.0
|
||||
#MCU = at90usb646 # Teensy++ 1.0
|
||||
#MCU = at90usb1286 # Teensy++ 2.0
|
||||
|
||||
|
||||
# Processor frequency.
|
||||
# Normally the first thing your program should do is set the clock prescaler,
|
||||
# so your program will run at the correct speed. You should also set this
|
||||
# variable to same clock speed. The _delay_ms() macro uses this, and many
|
||||
# examples use this variable to calculate timings. Do not add a "UL" here.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
# Output format. (can be srec, ihex, binary)
|
||||
FORMAT = ihex
|
||||
|
||||
|
||||
# Object files directory
|
||||
# To put object files in current directory, use a dot (.), do NOT make
|
||||
# this an empty or blank macro!
|
||||
OBJDIR = .
|
||||
|
||||
|
||||
# List C++ source files here. (C dependencies are automatically generated.)
|
||||
CPPSRC =
|
||||
|
||||
|
||||
# List Assembler source files here.
|
||||
# Make them always end in a capital .S. Files ending in a lowercase .s
|
||||
# will not be considered source files but generated files (assembler
|
||||
# output from the compiler), and will be deleted upon "make clean"!
|
||||
# Even though the DOS/Win* filesystem matches both .s and .S the same,
|
||||
# it will preserve the spelling of the filenames, and gcc itself does
|
||||
# care about how the name is spelled on its command-line.
|
||||
ASRC =
|
||||
|
||||
|
||||
# Optimization level, can be [0, 1, 2, 3, s].
|
||||
# 0 = turn off optimization. s = optimize for size.
|
||||
# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
|
||||
OPT = s
|
||||
|
||||
|
||||
# Debugging format.
|
||||
# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
|
||||
# AVR Studio 4.10 requires dwarf-2.
|
||||
# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
|
||||
DEBUG = dwarf-2
|
||||
|
||||
|
||||
# List any extra directories to look for include files here.
|
||||
# Each directory must be seperated by a space.
|
||||
# Use forward slashes for directory separators.
|
||||
# For a directory that has spaces, enclose it in quotes.
|
||||
EXTRAINCDIRS =
|
||||
|
||||
|
||||
# Compiler flag to set the C Standard level.
|
||||
# c89 = "ANSI" C
|
||||
# gnu89 = c89 plus GCC extensions
|
||||
# c99 = ISO C99 standard (not yet fully implemented)
|
||||
# gnu99 = c99 plus GCC extensions
|
||||
CSTANDARD = -std=gnu99
|
||||
|
||||
|
||||
# Place -D or -U options here for C sources
|
||||
CDEFS = -DF_CPU=$(F_CPU)UL
|
||||
|
||||
|
||||
# Place -D or -U options here for ASM sources
|
||||
ADEFS = -DF_CPU=$(F_CPU)
|
||||
|
||||
|
||||
# Place -D or -U options here for C++ sources
|
||||
CPPDEFS = -DF_CPU=$(F_CPU)UL
|
||||
#CPPDEFS += -D__STDC_LIMIT_MACROS
|
||||
#CPPDEFS += -D__STDC_CONSTANT_MACROS
|
||||
|
||||
|
||||
|
||||
#---------------- Compiler Options C ----------------
|
||||
# -g*: generate debugging information
|
||||
# -O*: optimization level
|
||||
# -f...: tuning, see GCC manual and avr-libc documentation
|
||||
# -Wall...: warning level
|
||||
# -Wa,...: tell GCC to pass this to the assembler.
|
||||
# -adhlns...: create assembler listing
|
||||
CFLAGS = -g$(DEBUG)
|
||||
CFLAGS += $(CDEFS)
|
||||
CFLAGS += -O$(OPT)
|
||||
CFLAGS += -funsigned-char
|
||||
CFLAGS += -funsigned-bitfields
|
||||
CFLAGS += -ffunction-sections
|
||||
CFLAGS += -fpack-struct
|
||||
CFLAGS += -fshort-enums
|
||||
CFLAGS += -Wall
|
||||
CFLAGS += -Wstrict-prototypes
|
||||
#CFLAGS += -mshort-calls
|
||||
#CFLAGS += -fno-unit-at-a-time
|
||||
#CFLAGS += -Wundef
|
||||
#CFLAGS += -Wunreachable-code
|
||||
#CFLAGS += -Wsign-compare
|
||||
CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
|
||||
CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
|
||||
CFLAGS += $(CSTANDARD)
|
||||
|
||||
|
||||
#---------------- Compiler Options C++ ----------------
|
||||
# -g*: generate debugging information
|
||||
# -O*: optimization level
|
||||
# -f...: tuning, see GCC manual and avr-libc documentation
|
||||
# -Wall...: warning level
|
||||
# -Wa,...: tell GCC to pass this to the assembler.
|
||||
# -adhlns...: create assembler listing
|
||||
CPPFLAGS = -g$(DEBUG)
|
||||
CPPFLAGS += $(CPPDEFS)
|
||||
CPPFLAGS += -O$(OPT)
|
||||
CPPFLAGS += -funsigned-char
|
||||
CPPFLAGS += -funsigned-bitfields
|
||||
CPPFLAGS += -fpack-struct
|
||||
CPPFLAGS += -fshort-enums
|
||||
CPPFLAGS += -fno-exceptions
|
||||
CPPFLAGS += -Wall
|
||||
CPPFLAGS += -Wundef
|
||||
#CPPFLAGS += -mshort-calls
|
||||
#CPPFLAGS += -fno-unit-at-a-time
|
||||
#CPPFLAGS += -Wstrict-prototypes
|
||||
#CPPFLAGS += -Wunreachable-code
|
||||
#CPPFLAGS += -Wsign-compare
|
||||
CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
|
||||
CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
|
||||
#CPPFLAGS += $(CSTANDARD)
|
||||
|
||||
|
||||
#---------------- Assembler Options ----------------
|
||||
# -Wa,...: tell GCC to pass this to the assembler.
|
||||
# -adhlns: create listing
|
||||
# -gstabs: have the assembler create line number information; note that
|
||||
# for use in COFF files, additional information about filenames
|
||||
# and function names needs to be present in the assembler source
|
||||
# files -- see avr-libc docs [FIXME: not yet described there]
|
||||
# -listing-cont-lines: Sets the maximum number of continuation lines of hex
|
||||
# dump that will be displayed for a given single line of source input.
|
||||
ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
|
||||
|
||||
|
||||
#---------------- Library Options ----------------
|
||||
# Minimalistic printf version
|
||||
PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
|
||||
|
||||
# Floating point printf version (requires MATH_LIB = -lm below)
|
||||
PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
|
||||
|
||||
# If this is left blank, then it will use the Standard printf version.
|
||||
PRINTF_LIB =
|
||||
#PRINTF_LIB = $(PRINTF_LIB_MIN)
|
||||
#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
|
||||
|
||||
|
||||
# Minimalistic scanf version
|
||||
SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
|
||||
|
||||
# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
|
||||
SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
|
||||
|
||||
# If this is left blank, then it will use the Standard scanf version.
|
||||
SCANF_LIB =
|
||||
#SCANF_LIB = $(SCANF_LIB_MIN)
|
||||
#SCANF_LIB = $(SCANF_LIB_FLOAT)
|
||||
|
||||
|
||||
MATH_LIB = -lm
|
||||
|
||||
|
||||
# List any extra directories to look for libraries here.
|
||||
# Each directory must be seperated by a space.
|
||||
# Use forward slashes for directory separators.
|
||||
# For a directory that has spaces, enclose it in quotes.
|
||||
EXTRALIBDIRS =
|
||||
|
||||
|
||||
|
||||
#---------------- External Memory Options ----------------
|
||||
|
||||
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
|
||||
# used for variables (.data/.bss) and heap (malloc()).
|
||||
#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
|
||||
|
||||
# 64 KB of external RAM, starting after internal RAM (ATmega128!),
|
||||
# only used for heap (malloc()).
|
||||
#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
|
||||
|
||||
EXTMEMOPTS =
|
||||
|
||||
|
||||
|
||||
#---------------- Linker Options ----------------
|
||||
# -Wl,...: tell GCC to pass this to linker.
|
||||
# -Map: create map file
|
||||
# --cref: add cross reference to map file
|
||||
LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
|
||||
LDFLAGS += -Wl,--relax
|
||||
LDFLAGS += -Wl,--gc-sections
|
||||
LDFLAGS += $(EXTMEMOPTS)
|
||||
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
|
||||
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
|
||||
#LDFLAGS += -T linker_script.x
|
||||
|
||||
|
||||
|
||||
#---------------- Programming Options (avrdude) ----------------
|
||||
|
||||
# Programming hardware
|
||||
# Type: avrdude -c ?
|
||||
# to get a full listing.
|
||||
#
|
||||
AVRDUDE_PROGRAMMER = stk500v2
|
||||
|
||||
# com1 = serial port. Use lpt1 to connect to parallel port.
|
||||
AVRDUDE_PORT = com1 # programmer connected to serial device
|
||||
|
||||
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
|
||||
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
|
||||
|
||||
|
||||
# Uncomment the following if you want avrdude's erase cycle counter.
|
||||
# Note that this counter needs to be initialized first using -Yn,
|
||||
# see avrdude manual.
|
||||
#AVRDUDE_ERASE_COUNTER = -y
|
||||
|
||||
# Uncomment the following if you do /not/ wish a verification to be
|
||||
# performed after programming the device.
|
||||
#AVRDUDE_NO_VERIFY = -V
|
||||
|
||||
# Increase verbosity level. Please use this when submitting bug
|
||||
# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
|
||||
# to submit bug reports.
|
||||
#AVRDUDE_VERBOSE = -v -v
|
||||
|
||||
AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
|
||||
AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
|
||||
AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
|
||||
AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
|
||||
|
||||
|
||||
|
||||
#---------------- Debugging Options ----------------
|
||||
|
||||
# For simulavr only - target MCU frequency.
|
||||
DEBUG_MFREQ = $(F_CPU)
|
||||
|
||||
# Set the DEBUG_UI to either gdb or insight.
|
||||
# DEBUG_UI = gdb
|
||||
DEBUG_UI = insight
|
||||
|
||||
# Set the debugging back-end to either avarice, simulavr.
|
||||
DEBUG_BACKEND = avarice
|
||||
#DEBUG_BACKEND = simulavr
|
||||
|
||||
# GDB Init Filename.
|
||||
GDBINIT_FILE = __avr_gdbinit
|
||||
|
||||
# When using avarice settings for the JTAG
|
||||
JTAG_DEV = /dev/com1
|
||||
|
||||
# Debugging port used to communicate between GDB / avarice / simulavr.
|
||||
DEBUG_PORT = 4242
|
||||
|
||||
# Debugging host used to communicate between GDB / avarice / simulavr, normally
|
||||
# just set to localhost unless doing some sort of crazy debugging when
|
||||
# avarice is running on a different computer.
|
||||
DEBUG_HOST = localhost
|
||||
|
||||
|
||||
|
||||
#============================================================================
|
||||
|
||||
|
||||
# Define programs and commands.
|
||||
SHELL = sh
|
||||
CC = avr-gcc
|
||||
OBJCOPY = avr-objcopy
|
||||
OBJDUMP = avr-objdump
|
||||
SIZE = avr-size
|
||||
AR = avr-ar rcs
|
||||
NM = avr-nm
|
||||
AVRDUDE = avrdude
|
||||
REMOVE = rm -f
|
||||
REMOVEDIR = rm -rf
|
||||
COPY = cp
|
||||
WINSHELL = cmd
|
||||
|
||||
|
||||
# Define Messages
|
||||
# English
|
||||
MSG_ERRORS_NONE = Errors: none
|
||||
MSG_BEGIN = -------- begin --------
|
||||
MSG_END = -------- end --------
|
||||
MSG_SIZE_BEFORE = Size before:
|
||||
MSG_SIZE_AFTER = Size after:
|
||||
MSG_COFF = Converting to AVR COFF:
|
||||
MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
|
||||
MSG_FLASH = Creating load file for Flash:
|
||||
MSG_EEPROM = Creating load file for EEPROM:
|
||||
MSG_EXTENDED_LISTING = Creating Extended Listing:
|
||||
MSG_SYMBOL_TABLE = Creating Symbol Table:
|
||||
MSG_LINKING = Linking:
|
||||
MSG_COMPILING = Compiling C:
|
||||
MSG_COMPILING_CPP = Compiling C++:
|
||||
MSG_ASSEMBLING = Assembling:
|
||||
MSG_CLEANING = Cleaning project:
|
||||
MSG_CREATING_LIBRARY = Creating library:
|
||||
|
||||
|
||||
|
||||
|
||||
# Define all object files.
|
||||
OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
|
||||
|
||||
# Define all listing files.
|
||||
LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
|
||||
|
||||
|
||||
# Compiler flags to generate dependency files.
|
||||
GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
|
||||
|
||||
|
||||
# Combine all necessary flags and optional flags.
|
||||
# Add target processor to flags.
|
||||
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
|
||||
ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
|
||||
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
# Default target.
|
||||
all: begin gccversion sizebefore build sizeafter end |
||||
|
||||
# Change the build target to build a HEX file or a library.
|
||||
build: elf hex eep lss sym |
||||
#build: lib
|
||||
|
||||
|
||||
elf: $(TARGET).elf |
||||
hex: $(TARGET).hex |
||||
eep: $(TARGET).eep |
||||
lss: $(TARGET).lss |
||||
sym: $(TARGET).sym |
||||
LIBNAME=lib$(TARGET).a
|
||||
lib: $(LIBNAME) |
||||
|
||||
|
||||
|
||||
# Eye candy.
|
||||
# AVR Studio 3.x does not check make's exit code but relies on
|
||||
# the following magic strings to be generated by the compile job.
|
||||
begin: |
||||
@echo
|
||||
@echo $(MSG_BEGIN)
|
||||
|
||||
end: |
||||
@echo $(MSG_END)
|
||||
@echo
|
||||
|
||||
|
||||
# Display size of file.
|
||||
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
|
||||
#ELFSIZE = $(SIZE) --mcu=$(MCU) --format=avr $(TARGET).elf
|
||||
ELFSIZE = $(SIZE) $(TARGET).elf
|
||||
|
||||
sizebefore: |
||||
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
|
||||
2>/dev/null; echo; fi
|
||||
|
||||
sizeafter: |
||||
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
|
||||
2>/dev/null; echo; fi
|
||||
|
||||
|
||||
|
||||
# Display compiler version information.
|
||||
gccversion : |
||||
@$(CC) --version
|
||||
|
||||
|
||||
|
||||
# Program the device.
|
||||
program: $(TARGET).hex $(TARGET).eep |
||||
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
|
||||
|
||||
|
||||
# Generate avr-gdb config/init file which does the following:
|
||||
# define the reset signal, load the target file, connect to target, and set
|
||||
# a breakpoint at main().
|
||||
gdb-config: |
||||
@$(REMOVE) $(GDBINIT_FILE)
|
||||
@echo define reset >> $(GDBINIT_FILE)
|
||||
@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
|
||||
@echo end >> $(GDBINIT_FILE)
|
||||
@echo file $(TARGET).elf >> $(GDBINIT_FILE)
|
||||
@echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE)
|
||||
ifeq ($(DEBUG_BACKEND),simulavr) |
||||
@echo load >> $(GDBINIT_FILE)
|
||||
endif |
||||
@echo break main >> $(GDBINIT_FILE)
|
||||
|
||||
debug: gdb-config $(TARGET).elf |
||||
ifeq ($(DEBUG_BACKEND), avarice) |
||||
@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
|
||||
@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
|
||||
$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
|
||||
@$(WINSHELL) /c pause
|
||||
|
||||
else |
||||
@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
|
||||
$(DEBUG_MFREQ) --port $(DEBUG_PORT)
|
||||
endif |
||||
@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
|
||||
|
||||
|
||||
|
||||
|
||||
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
|
||||
COFFCONVERT = $(OBJCOPY) --debugging
|
||||
COFFCONVERT += --change-section-address .data-0x800000
|
||||
COFFCONVERT += --change-section-address .bss-0x800000
|
||||
COFFCONVERT += --change-section-address .noinit-0x800000
|
||||
COFFCONVERT += --change-section-address .eeprom-0x810000
|
||||
|
||||
|
||||
|
||||
coff: $(TARGET).elf |
||||
@echo
|
||||
@echo $(MSG_COFF) $(TARGET).cof
|
||||
$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
|
||||
|
||||
|
||||
extcoff: $(TARGET).elf |
||||
@echo
|
||||
@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
|
||||
$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
|
||||
|
||||
|
||||
|
||||
# Create final output files (.hex, .eep) from ELF output file.
|
||||
%.hex: %.elf |
||||
@echo
|
||||
@echo $(MSG_FLASH) $@
|
||||
$(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature $< $@
|
||||
|
||||
%.eep: %.elf |
||||
@echo
|
||||
@echo $(MSG_EEPROM) $@
|
||||
-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
|
||||
--change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
|
||||
|
||||
# Create extended listing file from ELF output file.
|
||||
%.lss: %.elf |
||||
@echo
|
||||
@echo $(MSG_EXTENDED_LISTING) $@
|
||||
$(OBJDUMP) -h -S -z $< > $@
|
||||
|
||||
# Create a symbol table from ELF output file.
|
||||
%.sym: %.elf |
||||
@echo
|
||||
@echo $(MSG_SYMBOL_TABLE) $@
|
||||
$(NM) -n $< > $@
|
||||
|
||||
|
||||
|
||||
# Create library from object files.
|
||||
.SECONDARY : $(TARGET).a |
||||
.PRECIOUS : $(OBJ) |
||||
%.a: $(OBJ) |
||||
@echo
|
||||
@echo $(MSG_CREATING_LIBRARY) $@
|
||||
$(AR) $@ $(OBJ)
|
||||
|
||||
|
||||
# Link: create ELF output file from object files.
|
||||
.SECONDARY : $(TARGET).elf |
||||
.PRECIOUS : $(OBJ) |
||||
%.elf: $(OBJ) |
||||
@echo
|
||||
@echo $(MSG_LINKING) $@
|
||||
$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
|
||||
|
||||
|
||||
# Compile: create object files from C source files.
|
||||
$(OBJDIR)/%.o : %.c |
||||
@echo
|
||||
@echo $(MSG_COMPILING) $<
|
||||
$(CC) -c $(ALL_CFLAGS) $< -o $@
|
||||
|
||||
|
||||
# Compile: create object files from C++ source files.
|
||||
$(OBJDIR)/%.o : %.cpp |
||||
@echo
|
||||
@echo $(MSG_COMPILING_CPP) $<
|
||||
$(CC) -c $(ALL_CPPFLAGS) $< -o $@
|
||||
|
||||
|
||||
# Compile: create assembler files from C source files.
|
||||
%.s : %.c |
||||
$(CC) -S $(ALL_CFLAGS) $< -o $@
|
||||
|
||||
|
||||
# Compile: create assembler files from C++ source files.
|
||||
%.s : %.cpp |
||||
$(CC) -S $(ALL_CPPFLAGS) $< -o $@
|
||||
|
||||
|
||||
# Assemble: create object files from assembler source files.
|
||||
$(OBJDIR)/%.o : %.S |
||||
@echo
|
||||
@echo $(MSG_ASSEMBLING) $<
|
||||
$(CC) -c $(ALL_ASFLAGS) $< -o $@
|
||||
|
||||
|
||||
# Create preprocessed source for use in sending a bug report.
|
||||
%.i : %.c |
||||
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
|
||||
|
||||
|
||||
# Target: clean project.
|
||||
clean: begin clean_list end |
||||
|
||||
clean_list : |
||||
@echo
|
||||
@echo $(MSG_CLEANING)
|
||||
$(REMOVE) $(TARGET).hex
|
||||
$(REMOVE) $(TARGET).eep
|
||||
$(REMOVE) $(TARGET).cof
|
||||
$(REMOVE) $(TARGET).elf
|
||||
$(REMOVE) $(TARGET).map
|
||||
$(REMOVE) $(TARGET).sym
|
||||
$(REMOVE) $(TARGET).lss
|
||||
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)
|
||||
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)
|
||||
$(REMOVE) $(SRC:.c=.s)
|
||||
$(REMOVE) $(SRC:.c=.d)
|
||||
$(REMOVE) $(SRC:.c=.i)
|
||||
$(REMOVEDIR) .dep
|
||||
|
||||
|
||||
# Create object files directory
|
||||
$(shell mkdir $(OBJDIR) 2>/dev/null) |
||||
|
||||
|
||||
# Include the dependency files.
|
||||
-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*) |
||||
|
||||
|
||||
# Listing of phony targets.
|
||||
.PHONY : all begin finish end sizebefore sizeafter gccversion \
|
||||
build elf hex eep lss sym coff extcoff \ |
||||
clean clean_list program debug gdb-config |
||||
@ -0,0 +1,137 @@ |
||||
/* Keyboard example with debug channel, for Teensy USB Development Board
|
||||
* http://www.pjrc.com/teensy/usb_keyboard.html
|
||||
* Copyright (c) 2008 PJRC.COM, LLC |
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy |
||||
* of this software and associated documentation files (the "Software"), to deal |
||||
* in the Software without restriction, including without limitation the rights |
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
||||
* copies of the Software, and to permit persons to whom the Software is |
||||
* furnished to do so, subject to the following conditions: |
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in |
||||
* all copies or substantial portions of the Software. |
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE |
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
||||
* THE SOFTWARE. |
||||
*/ |
||||
|
||||
#include <avr/io.h> |
||||
#include <avr/pgmspace.h> |
||||
#include <avr/interrupt.h> |
||||
#include <util/delay.h> |
||||
#include "usb_keyboard_debug.h" |
||||
#include "print.h" |
||||
|
||||
#define LED_CONFIG (DDRD |= (1<<6)) |
||||
#define LED_ON (PORTD &= ~(1<<6)) |
||||
#define LED_OFF (PORTD |= (1<<6)) |
||||
#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n)) |
||||
|
||||
uint8_t number_keys[10]= |
||||
{KEY_0,KEY_1,KEY_2,KEY_3,KEY_4,KEY_5,KEY_6,KEY_7,KEY_8,KEY_9}; |
||||
|
||||
uint16_t idle_count=0; |
||||
|
||||
int main(void) |
||||
{ |
||||
uint8_t b, d, mask, i, reset_idle; |
||||
uint8_t b_prev=0xFF, d_prev=0xFF; |
||||
|
||||
// set for 16 MHz clock
|
||||
CPU_PRESCALE(0); |
||||
|
||||
// Configure all port B and port D pins as inputs with pullup resistors.
|
||||
// See the "Using I/O Pins" page for details.
|
||||
// http://www.pjrc.com/teensy/pins.html
|
||||
DDRD = 0x00; |
||||
DDRB = 0x00; |
||||
PORTB = 0xFF; |
||||
PORTD = 0xFF; |
||||
|
||||
// Initialize the USB, and then wait for the host to set configuration.
|
||||
// If the Teensy is powered without a PC connected to the USB port,
|
||||
// this will wait forever.
|
||||
usb_init(); |
||||
while (!usb_configured()) /* wait */ ; |
||||
|
||||
// Wait an extra second for the PC's operating system to load drivers
|
||||
// and do whatever it does to actually be ready for input
|
||||
_delay_ms(1000); |
||||
|
||||
// Configure timer 0 to generate a timer overflow interrupt every
|
||||
// 256*1024 clock cycles, or approx 61 Hz when using 16 MHz clock
|
||||
// This demonstrates how to use interrupts to implement a simple
|
||||
// inactivity timeout.
|
||||
TCCR0A = 0x00; |
||||
TCCR0B = 0x05; |
||||
TIMSK0 = (1<<TOIE0); |
||||
|
||||
print("Begin keyboard example program\n"); |
||||
print("All Port B or Port D pins are inputs with pullup resistors.\n"); |
||||
print("Any connection to ground on Port B or D pins will result in\n"); |
||||
print("keystrokes sent to the PC (and debug messages here).\n"); |
||||
while (1) { |
||||
// read all port B and port D pins
|
||||
b = PINB; |
||||
d = PIND; |
||||
// check if any pins are low, but were high previously
|
||||
mask = 1; |
||||
reset_idle = 0; |
||||
for (i=0; i<8; i++) { |
||||
if (((b & mask) == 0) && (b_prev & mask) != 0) { |
||||
usb_keyboard_press(KEY_B, KEY_SHIFT); |
||||
usb_keyboard_press(number_keys[i], 0); |
||||
print("Port B, bit "); |
||||
phex(i); |
||||
print("\n"); |
||||
reset_idle = 1; |
||||
} |
||||
if (((d & mask) == 0) && (d_prev & mask) != 0) { |
||||
usb_keyboard_press(KEY_D, KEY_SHIFT); |
||||
usb_keyboard_press(number_keys[i], 0); |
||||
print("Port D, bit "); |
||||
phex(i); |
||||
print("\n"); |
||||
reset_idle = 1; |
||||
} |
||||
mask = mask << 1; |
||||
} |
||||
// if any keypresses were detected, reset the idle counter
|
||||
if (reset_idle) { |
||||
// variables shared with interrupt routines must be
|
||||
// accessed carefully so the interrupt routine doesn't
|
||||
// try to use the variable in the middle of our access
|
||||
cli(); |
||||
idle_count = 0; |
||||
sei(); |
||||
} |
||||
// now the current pins will be the previous, and
|
||||
// wait a short delay so we're not highly sensitive
|
||||
// to mechanical "bounce".
|
||||
b_prev = b; |
||||
d_prev = d; |
||||
_delay_ms(2); |
||||
} |
||||
} |
||||
|
||||
// This interrupt routine is run approx 61 times per second.
|
||||
// A very simple inactivity timeout is implemented, where we
|
||||
// will send a space character and print a message to the
|
||||
// hid_listen debug message window.
|
||||
ISR(TIMER0_OVF_vect) |
||||
{ |
||||
idle_count++; |
||||
if (idle_count > 61 * 8) { |
||||
idle_count = 0; |
||||
print("Timer Event :)\n"); |
||||
usb_keyboard_press(KEY_SPACE, 0); |
||||
} |
||||
} |
||||
|
||||
|
||||
@ -0,0 +1,62 @@ |
||||
/* Very basic print functions, intended to be used with usb_debug_only.c
|
||||
* http://www.pjrc.com/teensy/
|
||||
* Copyright (c) 2008 PJRC.COM, LLC |
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy |
||||
* of this software and associated documentation files (the "Software"), to deal |
||||
* in the Software without restriction, including without limitation the rights |
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
||||
* copies of the Software, and to permit persons to whom the Software is |
||||
* furnished to do so, subject to the following conditions: |
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in |
||||
* all copies or substantial portions of the Software. |
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE |
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
||||
* THE SOFTWARE. |
||||
*/ |
||||
|
||||
// Version 1.0: Initial Release
|
||||
|
||||
#include <avr/io.h> |
||||
#include <avr/pgmspace.h> |
||||
|
||||
#include "print.h" |
||||
|
||||
void print_P(const char *s) |
||||
{ |
||||
char c; |
||||
|
||||
while (1) { |
||||
c = pgm_read_byte(s++); |
||||
if (!c) break; |
||||
if (c == '\n') usb_debug_putchar('\r'); |
||||
usb_debug_putchar(c); |
||||
} |
||||
} |
||||
|
||||
void phex1(unsigned char c) |
||||
{ |
||||
usb_debug_putchar(c + ((c < 10) ? '0' : 'A' - 10)); |
||||
} |
||||
|
||||
void phex(unsigned char c) |
||||
{ |
||||
phex1(c >> 4); |
||||
phex1(c & 15); |
||||
} |
||||
|
||||
void phex16(unsigned int i) |
||||
{ |
||||
phex(i >> 8); |
||||
phex(i); |
||||
} |
||||
|
||||
|
||||
|
||||
|
||||
@ -0,0 +1,16 @@ |
||||
#ifndef print_h__ |
||||
#define print_h__ |
||||
|
||||
#include <avr/pgmspace.h> |
||||
#include "usb_keyboard_debug.h" |
||||
|
||||
// this macro allows you to write print("some text") and
|
||||
// the string is automatically placed into flash memory :)
|
||||
#define print(s) print_P(PSTR(s)) |
||||
#define pchar(c) usb_debug_putchar(c) |
||||
|
||||
void print_P(const char *s); |
||||
void phex(unsigned char c); |
||||
void phex16(unsigned int i); |
||||
|
||||
#endif |
||||
@ -0,0 +1,750 @@ |
||||
/* USB Keyboard Plus Debug Channel Example for Teensy USB Development Board
|
||||
* http://www.pjrc.com/teensy/usb_keyboard.html
|
||||
* Copyright (c) 2009 PJRC.COM, LLC |
||||
*
|
||||
* Permission is hereby granted, free of charge, to any person obtaining a copy |
||||
* of this software and associated documentation files (the "Software"), to deal |
||||
* in the Software without restriction, including without limitation the rights |
||||
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell |
||||
* copies of the Software, and to permit persons to whom the Software is |
||||
* furnished to do so, subject to the following conditions: |
||||
*
|
||||
* The above copyright notice and this permission notice shall be included in |
||||
* all copies or substantial portions of the Software. |
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
||||
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE |
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN |
||||
* THE SOFTWARE. |
||||
*/ |
||||
|
||||
// Version 1.0: Initial Release
|
||||
// Version 1.1: Add support for Teensy 2.0
|
||||
|
||||
#define USB_SERIAL_PRIVATE_INCLUDE |
||||
#include "usb_keyboard_debug.h" |
||||
|
||||
/**************************************************************************
|
||||
* |
||||
* Configurable Options |
||||
* |
||||
**************************************************************************/ |
||||
|
||||
// You can change these to give your code its own name.
|
||||
#define STR_MANUFACTURER L"MfgName" |
||||
#define STR_PRODUCT L"Keyboard" |
||||
|
||||
|
||||
// Mac OS-X and Linux automatically load the correct drivers. On
|
||||
// Windows, even though the driver is supplied by Microsoft, an
|
||||
// INF file is needed to load the driver. These numbers need to
|
||||
// match the INF file.
|
||||
#define VENDOR_ID 0x16C0 |
||||
#define PRODUCT_ID 0x047D |
||||
|
||||
|
||||
// USB devices are supposed to implment a halt feature, which is
|
||||
// rarely (if ever) used. If you comment this line out, the halt
|
||||
// code will be removed, saving 102 bytes of space (gcc 4.3.0).
|
||||
// This is not strictly USB compliant, but works with all major
|
||||
// operating systems.
|
||||
#define SUPPORT_ENDPOINT_HALT |
||||
|
||||
|
||||
|
||||
/**************************************************************************
|
||||
* |
||||
* Endpoint Buffer Configuration |
||||
* |
||||
**************************************************************************/ |
||||
|
||||
#define ENDPOINT0_SIZE 32 |
||||
|
||||
#define KEYBOARD_INTERFACE 0 |
||||
#define KEYBOARD_ENDPOINT 3 |
||||
#define KEYBOARD_SIZE 8 |
||||
#define KEYBOARD_BUFFER EP_DOUBLE_BUFFER |
||||
|
||||
#define DEBUG_INTERFACE 1 |
||||
#define DEBUG_TX_ENDPOINT 4 |
||||
#define DEBUG_TX_SIZE 32 |
||||
#define DEBUG_TX_BUFFER EP_DOUBLE_BUFFER |
||||
|
||||
static const uint8_t PROGMEM endpoint_config_table[] = { |
||||
0, |
||||
0, |
||||
1, EP_TYPE_INTERRUPT_IN, EP_SIZE(KEYBOARD_SIZE) | KEYBOARD_BUFFER, |
||||
1, EP_TYPE_INTERRUPT_IN, EP_SIZE(DEBUG_TX_SIZE) | DEBUG_TX_BUFFER |
||||
}; |
||||
|
||||
|
||||
/**************************************************************************
|
||||
* |
||||
* Descriptor Data |
||||
* |
||||
**************************************************************************/ |
||||
|
||||
// Descriptors are the data that your computer reads when it auto-detects
|
||||
// this USB device (called "enumeration" in USB lingo). The most commonly
|
||||
// changed items are editable at the top of this file. Changing things
|
||||
// in here should only be done by those who've read chapter 9 of the USB
|
||||
// spec and relevant portions of any USB class specifications!
|
||||
|
||||
|
||||
static uint8_t PROGMEM device_descriptor[] = { |
||||
18, // bLength
|
||||
1, // bDescriptorType
|
||||
0x00, 0x02, // bcdUSB
|
||||
0, // bDeviceClass
|
||||
0, // bDeviceSubClass
|
||||
0, // bDeviceProtocol
|
||||
ENDPOINT0_SIZE, // bMaxPacketSize0
|
||||
LSB(VENDOR_ID), MSB(VENDOR_ID), // idVendor
|
||||
LSB(PRODUCT_ID), MSB(PRODUCT_ID), // idProduct
|
||||
0x00, 0x01, // bcdDevice
|
||||
1, // iManufacturer
|
||||
2, // iProduct
|
||||
0, // iSerialNumber
|
||||
1 // bNumConfigurations
|
||||
}; |
||||
|
||||
// Keyboard Protocol 1, HID 1.11 spec, Appendix B, page 59-60
|
||||
static uint8_t PROGMEM keyboard_hid_report_desc[] = { |
||||
0x05, 0x01, // Usage Page (Generic Desktop),
|
||||
0x09, 0x06, // Usage (Keyboard),
|
||||
0xA1, 0x01, // Collection (Application),
|
||||
0x75, 0x01, // Report Size (1),
|
||||
0x95, 0x08, // Report Count (8),
|
||||
0x05, 0x07, // Usage Page (Key Codes),
|
||||
0x19, 0xE0, // Usage Minimum (224),
|
||||
0x29, 0xE7, // Usage Maximum (231),
|
||||
0x15, 0x00, // Logical Minimum (0),
|
||||
0x25, 0x01, // Logical Maximum (1),
|
||||
0x81, 0x02, // Input (Data, Variable, Absolute), ;Modifier byte
|
||||
0x95, 0x01, // Report Count (1),
|
||||
0x75, 0x08, // Report Size (8),
|
||||
0x81, 0x03, // Input (Constant), ;Reserved byte
|
||||
0x95, 0x05, // Report Count (5),
|
||||
0x75, 0x01, // Report Size (1),
|
||||
0x05, 0x08, // Usage Page (LEDs),
|
||||
0x19, 0x01, // Usage Minimum (1),
|
||||
0x29, 0x05, // Usage Maximum (5),
|
||||
0x91, 0x02, // Output (Data, Variable, Absolute), ;LED report
|
||||
0x95, 0x01, // Report Count (1),
|
||||
0x75, 0x03, // Report Size (3),
|
||||
0x91, 0x03, // Output (Constant), ;LED report padding
|
||||
0x95, 0x06, // Report Count (6),
|
||||
0x75, 0x08, // Report Size (8),
|
||||
0x15, 0x00, // Logical Minimum (0),
|
||||
0x25, 0x68, // Logical Maximum(104),
|
||||
0x05, 0x07, // Usage Page (Key Codes),
|
||||
0x19, 0x00, // Usage Minimum (0),
|
||||
0x29, 0x68, // Usage Maximum (104),
|
||||
0x81, 0x00, // Input (Data, Array),
|
||||
0xc0 // End Collection
|
||||
}; |
||||
|
||||
static uint8_t PROGMEM debug_hid_report_desc[] = { |
||||
0x06, 0x31, 0xFF, // Usage Page 0xFF31 (vendor defined)
|
||||
0x09, 0x74, // Usage 0x74
|
||||
0xA1, 0x53, // Collection 0x53
|
||||
0x75, 0x08, // report size = 8 bits
|
||||
0x15, 0x00, // logical minimum = 0
|
||||
0x26, 0xFF, 0x00, // logical maximum = 255
|
||||
0x95, DEBUG_TX_SIZE, // report count
|
||||
0x09, 0x75, // usage
|
||||
0x81, 0x02, // Input (array)
|
||||
0xC0 // end collection
|
||||
}; |
||||
|
||||
#define CONFIG1_DESC_SIZE (9+9+9+7+9+9+7) |
||||
#define KEYBOARD_HID_DESC_OFFSET (9+9) |
||||
#define DEBUG_HID_DESC_OFFSET (9+9+9+7+9) |
||||
static uint8_t PROGMEM config1_descriptor[CONFIG1_DESC_SIZE] = { |
||||
// configuration descriptor, USB spec 9.6.3, page 264-266, Table 9-10
|
||||
9, // bLength;
|
||||
2, // bDescriptorType;
|
||||
LSB(CONFIG1_DESC_SIZE), // wTotalLength
|
||||
MSB(CONFIG1_DESC_SIZE), |
||||
2, // bNumInterfaces
|
||||
1, // bConfigurationValue
|
||||
0, // iConfiguration
|
||||
0xC0, // bmAttributes
|
||||
50, // bMaxPower
|
||||
// interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
|
||||
9, // bLength
|
||||
4, // bDescriptorType
|
||||
KEYBOARD_INTERFACE, // bInterfaceNumber
|
||||
0, // bAlternateSetting
|
||||
1, // bNumEndpoints
|
||||
0x03, // bInterfaceClass (0x03 = HID)
|
||||
0x01, // bInterfaceSubClass (0x01 = Boot)
|
||||
0x01, // bInterfaceProtocol (0x01 = Keyboard)
|
||||
0, // iInterface
|
||||
// HID interface descriptor, HID 1.11 spec, section 6.2.1
|
||||
9, // bLength
|
||||
0x21, // bDescriptorType
|
||||
0x11, 0x01, // bcdHID
|
||||
0, // bCountryCode
|
||||
1, // bNumDescriptors
|
||||
0x22, // bDescriptorType
|
||||
sizeof(keyboard_hid_report_desc), // wDescriptorLength
|
||||
0, |
||||
// endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
|
||||
7, // bLength
|
||||
5, // bDescriptorType
|
||||
KEYBOARD_ENDPOINT | 0x80, // bEndpointAddress
|
||||
0x03, // bmAttributes (0x03=intr)
|
||||
KEYBOARD_SIZE, 0, // wMaxPacketSize
|
||||
1, // bInterval
|
||||
// interface descriptor, USB spec 9.6.5, page 267-269, Table 9-12
|
||||
9, // bLength
|
||||
4, // bDescriptorType
|
||||
DEBUG_INTERFACE, // bInterfaceNumber
|
||||
0, // bAlternateSetting
|
||||
1, // bNumEndpoints
|
||||
0x03, // bInterfaceClass (0x03 = HID)
|
||||
0x00, // bInterfaceSubClass
|
||||
0x00, // bInterfaceProtocol
|
||||
0, // iInterface
|
||||
// HID interface descriptor, HID 1.11 spec, section 6.2.1
|
||||
9, // bLength
|
||||
0x21, // bDescriptorType
|
||||
0x11, 0x01, // bcdHID
|
||||
0, // bCountryCode
|
||||
1, // bNumDescriptors
|
||||
0x22, // bDescriptorType
|
||||
sizeof(debug_hid_report_desc), // wDescriptorLength
|
||||
0, |
||||
// endpoint descriptor, USB spec 9.6.6, page 269-271, Table 9-13
|
||||
7, // bLength
|
||||
5, // bDescriptorType
|
||||
DEBUG_TX_ENDPOINT | 0x80, // bEndpointAddress
|
||||
0x03, // bmAttributes (0x03=intr)
|
||||
DEBUG_TX_SIZE, 0, // wMaxPacketSize
|
||||
1 // bInterval
|
||||
}; |
||||
|
||||
// If you're desperate for a little extra code memory, these strings
|
||||
// can be completely removed if iManufacturer, iProduct, iSerialNumber
|
||||
// in the device desciptor are changed to zeros.
|
||||
struct usb_string_descriptor_struct { |
||||
uint8_t bLength; |
||||
uint8_t bDescriptorType; |
||||
int16_t wString[]; |
||||
}; |
||||
static struct usb_string_descriptor_struct PROGMEM string0 = { |
||||
4, |
||||
3, |
||||
{0x0409} |
||||
}; |
||||
static struct usb_string_descriptor_struct PROGMEM string1 = { |
||||
sizeof(STR_MANUFACTURER), |
||||
3, |
||||
STR_MANUFACTURER |
||||
}; |
||||
static struct usb_string_descriptor_struct PROGMEM string2 = { |
||||
sizeof(STR_PRODUCT), |
||||
3, |
||||
STR_PRODUCT |
||||
}; |
||||
|
||||
// This table defines which descriptor data is sent for each specific
|
||||
// request from the host (in wValue and wIndex).
|
||||
static struct descriptor_list_struct { |
||||
uint16_t wValue; |
||||
uint16_t wIndex; |
||||
const uint8_t *addr; |
||||
uint8_t length; |
||||
} PROGMEM descriptor_list[] = { |
||||
{0x0100, 0x0000, device_descriptor, sizeof(device_descriptor)}, |
||||
{0x0200, 0x0000, config1_descriptor, sizeof(config1_descriptor)}, |
||||
{0x2200, KEYBOARD_INTERFACE, keyboard_hid_report_desc, sizeof(keyboard_hid_report_desc)}, |
||||
{0x2100, KEYBOARD_INTERFACE, config1_descriptor+KEYBOARD_HID_DESC_OFFSET, 9}, |
||||
{0x2200, DEBUG_INTERFACE, debug_hid_report_desc, sizeof(debug_hid_report_desc)}, |
||||
{0x2100, DEBUG_INTERFACE, config1_descriptor+DEBUG_HID_DESC_OFFSET, 9}, |
||||
{0x0300, 0x0000, (const uint8_t *)&string0, 4}, |
||||
{0x0301, 0x0409, (const uint8_t *)&string1, sizeof(STR_MANUFACTURER)}, |
||||
{0x0302, 0x0409, (const uint8_t *)&string2, sizeof(STR_PRODUCT)} |
||||
}; |
||||
#define NUM_DESC_LIST (sizeof(descriptor_list)/sizeof(struct descriptor_list_struct)) |
||||
|
||||
|
||||
/**************************************************************************
|
||||
* |
||||
* Variables - these are the only non-stack RAM usage |
||||
* |
||||
**************************************************************************/ |
||||
|
||||
// zero when we are not configured, non-zero when enumerated
|
||||
static volatile uint8_t usb_configuration=0; |
||||
|
||||
// the time remaining before we transmit any partially full
|
||||
// packet, or send a zero length packet.
|
||||
static volatile uint8_t debug_flush_timer=0; |
||||
|
||||
// which modifier keys are currently pressed
|
||||
// 1=left ctrl, 2=left shift, 4=left alt, 8=left gui
|
||||
// 16=right ctrl, 32=right shift, 64=right alt, 128=right gui
|
||||
uint8_t keyboard_modifier_keys=0; |
||||
|
||||
// which keys are currently pressed, up to 6 keys may be down at once
|
||||
uint8_t keyboard_keys[6]={0,0,0,0,0,0}; |
||||
|
||||
// protocol setting from the host. We use exactly the same report
|
||||
// either way, so this variable only stores the setting since we
|
||||
// are required to be able to report which setting is in use.
|
||||
static uint8_t keyboard_protocol=1; |
||||
|
||||
// the idle configuration, how often we send the report to the
|
||||
// host (ms * 4) even when it hasn't changed
|
||||
static uint8_t keyboard_idle_config=125; |
||||
|
||||
// count until idle timeout
|
||||
static uint8_t keyboard_idle_count=0; |
||||
|
||||
// 1=num lock, 2=caps lock, 4=scroll lock, 8=compose, 16=kana
|
||||
volatile uint8_t keyboard_leds=0; |
||||
|
||||
|
||||
/**************************************************************************
|
||||
* |
||||
* Public Functions - these are the API intended for the user |
||||
* |
||||
**************************************************************************/ |
||||
|
||||
|
||||
// initialize USB
|
||||
void usb_init(void) |
||||
{ |
||||
HW_CONFIG(); |
||||
USB_FREEZE(); // enable USB
|
||||
PLL_CONFIG(); // config PLL
|
||||
while (!(PLLCSR & (1<<PLOCK))) ; // wait for PLL lock
|
||||
USB_CONFIG(); // start USB clock
|
||||
UDCON = 0; // enable attach resistor
|
||||
usb_configuration = 0; |
||||
UDIEN = (1<<EORSTE)|(1<<SOFE); |
||||
sei(); |
||||
} |
||||
|
||||
// return 0 if the USB is not configured, or the configuration
|
||||
// number selected by the HOST
|
||||
uint8_t usb_configured(void) |
||||
{ |
||||
return usb_configuration; |
||||
} |
||||
|
||||
|
||||
// perform a single keystroke
|
||||
int8_t usb_keyboard_press(uint8_t key, uint8_t modifier) |
||||
{ |
||||
int8_t r; |
||||
|
||||
keyboard_modifier_keys = modifier; |
||||
keyboard_keys[0] = key; |
||||
r = usb_keyboard_send(); |
||||
if (r) return r; |
||||
keyboard_modifier_keys = 0; |
||||
keyboard_keys[0] = 0; |
||||
return usb_keyboard_send(); |
||||
} |
||||
|
||||
// send the contents of keyboard_keys and keyboard_modifier_keys
|
||||
int8_t usb_keyboard_send(void) |
||||
{ |
||||
uint8_t i, intr_state, timeout; |
||||
|
||||
if (!usb_configuration) return -1; |
||||
intr_state = SREG; |
||||
cli(); |
||||
UENUM = KEYBOARD_ENDPOINT; |
||||
timeout = UDFNUML + 50; |
||||
while (1) { |
||||
// are we ready to transmit?
|
||||
if (UEINTX & (1<<RWAL)) break; |
||||
SREG = intr_state; |
||||
// has the USB gone offline?
|
||||
if (!usb_configuration) return -1; |
||||
// have we waited too long?
|
||||
if (UDFNUML == timeout) return -1; |
||||
// get ready to try checking again
|
||||
intr_state = SREG; |
||||
cli(); |
||||
UENUM = KEYBOARD_ENDPOINT; |
||||
} |
||||
UEDATX = keyboard_modifier_keys; |
||||
UEDATX = 0; |
||||
for (i=0; i<6; i++) { |
||||
UEDATX = keyboard_keys[i]; |
||||
} |
||||
UEINTX = 0x3A; |
||||
keyboard_idle_count = 0; |
||||
SREG = intr_state; |
||||
return 0; |
||||
} |
||||
|
||||
// transmit a character. 0 returned on success, -1 on error
|
||||
int8_t usb_debug_putchar(uint8_t c) |
||||
{ |
||||
static uint8_t previous_timeout=0; |
||||
uint8_t timeout, intr_state; |
||||
|
||||
// if we're not online (enumerated and configured), error
|
||||
if (!usb_configuration) return -1; |
||||
// interrupts are disabled so these functions can be
|
||||
// used from the main program or interrupt context,
|
||||
// even both in the same program!
|
||||
intr_state = SREG; |
||||
cli(); |
||||
UENUM = DEBUG_TX_ENDPOINT; |
||||
// if we gave up due to timeout before, don't wait again
|
||||
if (previous_timeout) { |
||||
if (!(UEINTX & (1<<RWAL))) { |
||||
SREG = intr_state; |
||||
return -1; |
||||
} |
||||
previous_timeout = 0; |
||||
} |
||||
// wait for the FIFO to be ready to accept data
|
||||
timeout = UDFNUML + 4; |
||||
while (1) { |
||||
// are we ready to transmit?
|
||||
if (UEINTX & (1<<RWAL)) break; |
||||
SREG = intr_state; |
||||
// have we waited too long?
|
||||
if (UDFNUML == timeout) { |
||||
previous_timeout = 1; |
||||
return -1; |
||||
} |
||||
// has the USB gone offline?
|
||||
if (!usb_configuration) return -1; |
||||
// get ready to try checking again
|
||||
intr_state = SREG; |
||||
cli(); |
||||
UENUM = DEBUG_TX_ENDPOINT; |
||||
} |
||||
// actually write the byte into the FIFO
|
||||
UEDATX = c; |
||||
// if this completed a packet, transmit it now!
|
||||
if (!(UEINTX & (1<<RWAL))) { |
||||
UEINTX = 0x3A; |
||||
debug_flush_timer = 0; |
||||
} else { |
||||
debug_flush_timer = 2; |
||||
} |
||||
SREG = intr_state; |
||||
return 0; |
||||
} |
||||
|
||||
|
||||
// immediately transmit any buffered output.
|
||||
void usb_debug_flush_output(void) |
||||
{ |
||||
uint8_t intr_state; |
||||
|
||||
intr_state = SREG; |
||||
cli(); |
||||
if (debug_flush_timer) { |
||||
UENUM = DEBUG_TX_ENDPOINT; |
||||
while ((UEINTX & (1<<RWAL))) { |
||||
UEDATX = 0; |
||||
} |
||||
UEINTX = 0x3A; |
||||
debug_flush_timer = 0; |
||||
} |
||||
SREG = intr_state; |
||||
} |
||||
|
||||
|
||||
|
||||
/**************************************************************************
|
||||
* |
||||
* Private Functions - not intended for general user consumption.... |
||||
* |
||||
**************************************************************************/ |
||||
|
||||
|
||||
|
||||
// USB Device Interrupt - handle all device-level events
|
||||
// the transmit buffer flushing is triggered by the start of frame
|
||||
//
|
||||
ISR(USB_GEN_vect) |
||||
{ |
||||
uint8_t intbits, t, i; |
||||
static uint8_t div4=0; |
||||
|
||||
intbits = UDINT; |
||||
UDINT = 0; |
||||
if (intbits & (1<<EORSTI)) { |
||||
UENUM = 0; |
||||
UECONX = 1; |
||||
UECFG0X = EP_TYPE_CONTROL; |
||||
UECFG1X = EP_SIZE(ENDPOINT0_SIZE) | EP_SINGLE_BUFFER; |
||||
UEIENX = (1<<RXSTPE); |
||||
usb_configuration = 0; |
||||
} |
||||
if ((intbits & (1<<SOFI)) && usb_configuration) { |
||||
t = debug_flush_timer; |
||||
if (t) { |
||||
debug_flush_timer = -- t; |
||||
if (!t) { |
||||
UENUM = DEBUG_TX_ENDPOINT; |
||||
while ((UEINTX & (1<<RWAL))) { |
||||
UEDATX = 0; |
||||
} |
||||
UEINTX = 0x3A; |
||||
} |
||||
} |
||||
if (keyboard_idle_config && (++div4 & 3) == 0) { |
||||
UENUM = KEYBOARD_ENDPOINT; |
||||
if (UEINTX & (1<<RWAL)) { |
||||
keyboard_idle_count++; |
||||
if (keyboard_idle_count == keyboard_idle_config) { |
||||
keyboard_idle_count = 0; |
||||
UEDATX = keyboard_modifier_keys; |
||||
UEDATX = 0; |
||||
for (i=0; i<6; i++) { |
||||
UEDATX = keyboard_keys[i]; |
||||
} |
||||
UEINTX = 0x3A; |
||||
} |
||||
} |
||||
} |
||||
} |
||||
} |
||||
|
||||
|
||||
|
||||
// Misc functions to wait for ready and send/receive packets
|
||||
static inline void usb_wait_in_ready(void) |
||||
{ |
||||
while (!(UEINTX & (1<<TXINI))) ; |
||||
} |
||||
static inline void usb_send_in(void) |
||||
{ |
||||
UEINTX = ~(1<<TXINI); |
||||
} |
||||
static inline void usb_wait_receive_out(void) |
||||
{ |
||||
while (!(UEINTX & (1<<RXOUTI))) ; |
||||
} |
||||
static inline void usb_ack_out(void) |
||||
{ |
||||
UEINTX = ~(1<<RXOUTI); |
||||
} |
||||
|
||||
|
||||
|
||||
// USB Endpoint Interrupt - endpoint 0 is handled here. The
|
||||
// other endpoints are manipulated by the user-callable
|
||||
// functions, and the start-of-frame interrupt.
|
||||
//
|
||||
ISR(USB_COM_vect) |
||||
{ |
||||
uint8_t intbits; |
||||
const uint8_t *list; |
||||
const uint8_t *cfg; |
||||
uint8_t i, n, len, en; |
||||
uint8_t bmRequestType; |
||||
uint8_t bRequest; |
||||
uint16_t wValue; |
||||
uint16_t wIndex; |
||||
uint16_t wLength; |
||||
uint16_t desc_val; |
||||
const uint8_t *desc_addr; |
||||
uint8_t desc_length; |
||||
|
||||
UENUM = 0; |
||||
intbits = UEINTX; |
||||
if (intbits & (1<<RXSTPI)) { |
||||
bmRequestType = UEDATX; |
||||
bRequest = UEDATX; |
||||
wValue = UEDATX; |
||||
wValue |= (UEDATX << 8); |
||||
wIndex = UEDATX; |
||||
wIndex |= (UEDATX << 8); |
||||
wLength = UEDATX; |
||||
wLength |= (UEDATX << 8); |
||||
UEINTX = ~((1<<RXSTPI) | (1<<RXOUTI) | (1<<TXINI)); |
||||
if (bRequest == GET_DESCRIPTOR) { |
||||
list = (const uint8_t *)descriptor_list; |
||||
for (i=0; ; i++) { |
||||
if (i >= NUM_DESC_LIST) { |
||||
UECONX = (1<<STALLRQ)|(1<<EPEN); //stall
|
||||
return; |
||||
} |
||||
desc_val = pgm_read_word(list); |
||||
if (desc_val != wValue) { |
||||
list += sizeof(struct descriptor_list_struct); |
||||
continue; |
||||
} |
||||
list += 2; |
||||
desc_val = pgm_read_word(list); |
||||
if (desc_val != wIndex) { |
||||
list += sizeof(struct descriptor_list_struct)-2; |
||||
continue; |
||||
} |
||||
list += 2; |
||||
desc_addr = (const uint8_t *)pgm_read_word(list); |
||||
list += 2; |
||||
desc_length = pgm_read_byte(list); |
||||
break; |
||||
} |
||||
len = (wLength < 256) ? wLength : 255; |
||||
if (len > desc_length) len = desc_length; |
||||
do { |
||||
// wait for host ready for IN packet
|
||||
do { |
||||
i = UEINTX; |
||||
} while (!(i & ((1<<TXINI)|(1<<RXOUTI)))); |
||||
if (i & (1<<RXOUTI)) return; // abort
|
||||
// send IN packet
|
||||
n = len < ENDPOINT0_SIZE ? len : ENDPOINT0_SIZE; |
||||
for (i = n; i; i--) { |
||||
UEDATX = pgm_read_byte(desc_addr++); |
||||
} |
||||
len -= n; |
||||
usb_send_in(); |
||||
} while (len || n == ENDPOINT0_SIZE); |
||||
return; |
||||
} |
||||
if (bRequest == SET_ADDRESS) { |
||||
usb_send_in(); |
||||
usb_wait_in_ready(); |
||||
UDADDR = wValue | (1<<ADDEN); |
||||
return; |
||||
} |
||||
if (bRequest == SET_CONFIGURATION && bmRequestType == 0) { |
||||
usb_configuration = wValue; |
||||
usb_send_in(); |
||||
cfg = endpoint_config_table; |
||||
for (i=1; i<5; i++) { |
||||
UENUM = i; |
||||
en = pgm_read_byte(cfg++); |
||||
UECONX = en; |
||||
if (en) { |
||||
UECFG0X = pgm_read_byte(cfg++); |
||||
UECFG1X = pgm_read_byte(cfg++); |
||||
} |
||||
} |
||||
UERST = 0x1E; |
||||
UERST = 0; |
||||
return; |
||||
} |
||||
if (bRequest == GET_CONFIGURATION && bmRequestType == 0x80) { |
||||
usb_wait_in_ready(); |
||||
UEDATX = usb_configuration; |
||||
usb_send_in(); |
||||
return; |
||||
} |
||||
|
||||
if (bRequest == GET_STATUS) { |
||||
usb_wait_in_ready(); |
||||
i = 0; |
||||
#ifdef SUPPORT_ENDPOINT_HALT |
||||
if (bmRequestType == 0x82) { |
||||
UENUM = wIndex; |
||||
if (UECONX & (1<<STALLRQ)) i = 1; |
||||
UENUM = 0; |
||||
} |
||||
#endif |
||||
UEDATX = i; |
||||
UEDATX = 0; |
||||
usb_send_in(); |
||||
return; |
||||
} |
||||
#ifdef SUPPORT_ENDPOINT_HALT |
||||
if ((bRequest == CLEAR_FEATURE || bRequest == SET_FEATURE) |
||||
&& bmRequestType == 0x02 && wValue == 0) { |
||||
i = wIndex & 0x7F; |
||||
if (i >= 1 && i <= MAX_ENDPOINT) { |
||||
usb_send_in(); |
||||
UENUM = i; |
||||
if (bRequest == SET_FEATURE) { |
||||
UECONX = (1<<STALLRQ)|(1<<EPEN); |
||||
} else { |
||||
UECONX = (1<<STALLRQC)|(1<<RSTDT)|(1<<EPEN); |
||||
UERST = (1 << i); |
||||
UERST = 0; |
||||
} |
||||
return; |
||||
} |
||||
} |
||||
#endif |
||||
if (wIndex == KEYBOARD_INTERFACE) { |
||||
if (bmRequestType == 0xA1) { |
||||
if (bRequest == HID_GET_REPORT) { |
||||
usb_wait_in_ready(); |
||||
UEDATX = keyboard_modifier_keys; |
||||
UEDATX = 0; |
||||
for (i=0; i<6; i++) { |
||||
UEDATX = keyboard_keys[i]; |
||||
} |
||||
usb_send_in(); |
||||
return; |
||||
} |
||||
if (bRequest == HID_GET_IDLE) { |
||||
usb_wait_in_ready(); |
||||
UEDATX = keyboard_idle_config; |
||||
usb_send_in(); |
||||
return; |
||||
} |
||||
if (bRequest == HID_GET_PROTOCOL) { |
||||
usb_wait_in_ready(); |
||||
UEDATX = keyboard_protocol; |
||||
usb_send_in(); |
||||
return; |
||||
} |
||||
} |
||||
if (bmRequestType == 0x21) { |
||||
if (bRequest == HID_SET_REPORT) { |
||||
usb_wait_receive_out(); |
||||
keyboard_leds = UEDATX; |
||||
usb_ack_out(); |
||||
usb_send_in(); |
||||
return; |
||||
} |
||||
if (bRequest == HID_SET_IDLE) { |
||||
keyboard_idle_config = (wValue >> 8); |
||||
keyboard_idle_count = 0; |
||||
//usb_wait_in_ready();
|
||||
usb_send_in(); |
||||
return; |
||||
} |
||||
if (bRequest == HID_SET_PROTOCOL) { |
||||
keyboard_protocol = wValue; |
||||
//usb_wait_in_ready();
|
||||
usb_send_in(); |
||||
return; |
||||
} |
||||
} |
||||
} |
||||
if (wIndex == DEBUG_INTERFACE) { |
||||
if (bRequest == HID_GET_REPORT && bmRequestType == 0xA1) { |
||||
len = wLength; |
||||
do { |
||||
// wait for host ready for IN packet
|
||||
do { |
||||
i = UEINTX; |
||||
} while (!(i & ((1<<TXINI)|(1<<RXOUTI)))); |
||||
if (i & (1<<RXOUTI)) return; // abort
|
||||
// send IN packet
|
||||
n = len < ENDPOINT0_SIZE ? len : ENDPOINT0_SIZE; |
||||
for (i = n; i; i--) { |
||||
UEDATX = 0; |
||||
} |
||||
len -= n; |
||||
usb_send_in(); |
||||
} while (len || n == ENDPOINT0_SIZE); |
||||
return; |
||||
} |
||||
} |
||||
} |
||||
UECONX = (1<<STALLRQ) | (1<<EPEN); // stall
|
||||
} |
||||
|
||||
|
||||
@ -0,0 +1,203 @@ |
||||
#ifndef usb_serial_h__ |
||||
#define usb_serial_h__ |
||||
|
||||
#include <stdint.h> |
||||
|
||||
void usb_init(void); // initialize everything
|
||||
uint8_t usb_configured(void); // is the USB port configured
|
||||
|
||||
int8_t usb_keyboard_press(uint8_t key, uint8_t modifier); |
||||
int8_t usb_keyboard_send(void); |
||||
extern uint8_t keyboard_modifier_keys; |
||||
extern uint8_t keyboard_keys[6]; |
||||
extern volatile uint8_t keyboard_leds; |
||||
|
||||
int8_t usb_debug_putchar(uint8_t c); // transmit a character
|
||||
void usb_debug_flush_output(void); // immediately transmit any buffered output
|
||||
#define USB_DEBUG_HID |
||||
|
||||
#define KEY_CTRL 0x01 |
||||
#define KEY_SHIFT 0x02 |
||||
#define KEY_ALT 0x04 |
||||
#define KEY_GUI 0x08 |
||||
#define KEY_LEFT_CTRL 0x01 |
||||
#define KEY_LEFT_SHIFT 0x02 |
||||
#define KEY_LEFT_ALT 0x04 |
||||
#define KEY_LEFT_GUI 0x08 |
||||
#define KEY_RIGHT_CTRL 0x10 |
||||
#define KEY_RIGHT_SHIFT 0x20 |
||||
#define KEY_RIGHT_ALT 0x40 |
||||
#define KEY_RIGHT_GUI 0x80 |
||||
|
||||
#define KEY_A 4 |
||||
#define KEY_B 5 |
||||
#define KEY_C 6 |
||||
#define KEY_D 7 |
||||
#define KEY_E 8 |
||||
#define KEY_F 9 |
||||
#define KEY_G 10 |
||||
#define KEY_H 11 |
||||
#define KEY_I 12 |
||||
#define KEY_J 13 |
||||
#define KEY_K 14 |
||||
#define KEY_L 15 |
||||
#define KEY_M 16 |
||||
#define KEY_N 17 |
||||
#define KEY_O 18 |
||||
#define KEY_P 19 |
||||
#define KEY_Q 20 |
||||
#define KEY_R 21 |
||||
#define KEY_S 22 |
||||
#define KEY_T 23 |
||||
#define KEY_U 24 |
||||
#define KEY_V 25 |
||||
#define KEY_W 26 |
||||
#define KEY_X 27 |
||||
#define KEY_Y 28 |
||||
#define KEY_Z 29 |
||||
#define KEY_1 30 |
||||
#define KEY_2 31 |
||||
#define KEY_3 32 |
||||
#define KEY_4 33 |
||||
#define KEY_5 34 |
||||
#define KEY_6 35 |
||||
#define KEY_7 36 |
||||
#define KEY_8 37 |
||||
#define KEY_9 38 |
||||
#define KEY_0 39 |
||||
#define KEY_ENTER 40 |
||||
#define KEY_ESC 41 |
||||
#define KEY_BACKSPACE 42 |
||||
#define KEY_TAB 43 |
||||
#define KEY_SPACE 44 |
||||
#define KEY_MINUS 45 |
||||
#define KEY_EQUAL 46 |
||||
#define KEY_LEFT_BRACE 47 |
||||
#define KEY_RIGHT_BRACE 48 |
||||
#define KEY_BACKSLASH 49 |
||||
#define KEY_NUMBER 50 |
||||
#define KEY_SEMICOLON 51 |
||||
#define KEY_QUOTE 52 |
||||
#define KEY_TILDE 53 |
||||
#define KEY_COMMA 54 |
||||
#define KEY_PERIOD 55 |
||||
#define KEY_SLASH 56 |
||||
#define KEY_CAPS_LOCK 57 |
||||
#define KEY_F1 58 |
||||
#define KEY_F2 59 |
||||
#define KEY_F3 60 |
||||
#define KEY_F4 61 |
||||
#define KEY_F5 62 |
||||
#define KEY_F6 63 |
||||
#define KEY_F7 64 |
||||
#define KEY_F8 65 |
||||
#define KEY_F9 66 |
||||
#define KEY_F10 67 |
||||
#define KEY_F11 68 |
||||
#define KEY_F12 69 |
||||
#define KEY_PRINTSCREEN 70 |
||||
#define KEY_SCROLL_LOCK 71 |
||||
#define KEY_PAUSE 72 |
||||
#define KEY_INSERT 73 |
||||
#define KEY_HOME 74 |
||||
#define KEY_PAGE_UP 75 |
||||
#define KEY_DELETE 76 |
||||
#define KEY_END 77 |
||||
#define KEY_PAGE_DOWN 78 |
||||
#define KEY_RIGHT 79 |
||||
#define KEY_LEFT 80 |
||||
#define KEY_DOWN 81 |
||||
#define KEY_UP 82 |
||||
#define KEY_NUM_LOCK 83 |
||||
#define KEYPAD_SLASH 84 |
||||
#define KEYPAD_ASTERIX 85 |
||||
#define KEYPAD_MINUS 86 |
||||
#define KEYPAD_PLUS 87 |
||||
#define KEYPAD_ENTER 88 |
||||
#define KEYPAD_1 89 |
||||
#define KEYPAD_2 90 |
||||
#define KEYPAD_3 91 |
||||
#define KEYPAD_4 92 |
||||
#define KEYPAD_5 93 |
||||
#define KEYPAD_6 94 |
||||
#define KEYPAD_7 95 |
||||
#define KEYPAD_8 96 |
||||
#define KEYPAD_9 97 |
||||
#define KEYPAD_0 98 |
||||
#define KEYPAD_PERIOD 99 |
||||
|
||||
|
||||
|
||||
|
||||
// Everything below this point is only intended for usb_serial.c
|
||||
#ifdef USB_SERIAL_PRIVATE_INCLUDE |
||||
#include <avr/io.h> |
||||
#include <avr/pgmspace.h> |
||||
#include <avr/interrupt.h> |
||||
|
||||
#define EP_TYPE_CONTROL 0x00 |
||||
#define EP_TYPE_BULK_IN 0x81 |
||||
#define EP_TYPE_BULK_OUT 0x80 |
||||
#define EP_TYPE_INTERRUPT_IN 0xC1 |
||||
#define EP_TYPE_INTERRUPT_OUT 0xC0 |
||||
#define EP_TYPE_ISOCHRONOUS_IN 0x41 |
||||
#define EP_TYPE_ISOCHRONOUS_OUT 0x40 |
||||
|
||||
#define EP_SINGLE_BUFFER 0x02 |
||||
#define EP_DOUBLE_BUFFER 0x06 |
||||
|
||||
#define EP_SIZE(s) ((s) == 64 ? 0x30 : \ |
||||
((s) == 32 ? 0x20 : \
|
||||
((s) == 16 ? 0x10 : \
|
||||
0x00))) |
||||
|
||||
#define MAX_ENDPOINT 4 |
||||
|
||||
#define LSB(n) (n & 255) |
||||
#define MSB(n) ((n >> 8) & 255) |
||||
|
||||
#if defined(__AVR_AT90USB162__) |
||||
#define HW_CONFIG() |
||||
#define PLL_CONFIG() (PLLCSR = ((1<<PLLE)|(1<<PLLP0))) |
||||
#define USB_CONFIG() (USBCON = (1<<USBE)) |
||||
#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK))) |
||||
#elif defined(__AVR_ATmega32U4__) |
||||
#define HW_CONFIG() (UHWCON = 0x01) |
||||
#define PLL_CONFIG() (PLLCSR = 0x12) |
||||
#define USB_CONFIG() (USBCON = ((1<<USBE)|(1<<OTGPADE))) |
||||
#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK))) |
||||
#elif defined(__AVR_AT90USB646__) |
||||
#define HW_CONFIG() (UHWCON = 0x81) |
||||
#define PLL_CONFIG() (PLLCSR = 0x1A) |
||||
#define USB_CONFIG() (USBCON = ((1<<USBE)|(1<<OTGPADE))) |
||||
#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK))) |
||||
#elif defined(__AVR_AT90USB1286__) |
||||
#define HW_CONFIG() (UHWCON = 0x81) |
||||
#define PLL_CONFIG() (PLLCSR = 0x16) |
||||
#define USB_CONFIG() (USBCON = ((1<<USBE)|(1<<OTGPADE))) |
||||
#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK))) |
||||
#endif |
||||
|
||||
// standard control endpoint request types
|
||||
#define GET_STATUS 0 |
||||
#define CLEAR_FEATURE 1 |
||||
#define SET_FEATURE 3 |
||||
#define SET_ADDRESS 5 |
||||
#define GET_DESCRIPTOR 6 |
||||
#define GET_CONFIGURATION 8 |
||||
#define SET_CONFIGURATION 9 |
||||
#define GET_INTERFACE 10 |
||||
#define SET_INTERFACE 11 |
||||
// HID (human interface device)
|
||||
#define HID_GET_REPORT 1 |
||||
#define HID_GET_IDLE 2 |
||||
#define HID_GET_PROTOCOL 3 |
||||
#define HID_SET_REPORT 9 |
||||
#define HID_SET_IDLE 10 |
||||
#define HID_SET_PROTOCOL 11 |
||||
// CDC (communication class device)
|
||||
#define CDC_SET_LINE_CODING 0x20 |
||||
#define CDC_GET_LINE_CODING 0x21 |
||||
#define CDC_SET_CONTROL_LINE_STATE 0x22 |
||||
#endif |
||||
#endif |
||||
Loading…
Reference in new issue