Refactor to use led config - Part 2 (#10906)

* Refactor to use led config

* Refactor to use led config

* Refactor to use led config

keyboards/bpiphany/kitten_paw/config.h

@@ -48,6 +48,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
+#define LED_NUM_LOCK_PIN B7
+#define LED_CAPS_LOCK_PIN C6
+#define LED_SCROLL_LOCK_PIN C5
+#define LED_PIN_ON_STATE 0
+
 // #define BACKLIGHT_PIN B7
 // #define BACKLIGHT_BREATHING
 // #define BACKLIGHT_LEVELS 3

keyboards/bpiphany/kitten_paw/kitten_paw.c

@@ -1,51 +1 @@
 #include "kitten_paw.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-    matrix_scan_user();
-}
-
-__attribute__ ((weak))
-void matrix_init_user(void) {
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-    CONFIG_LED_IO;
-    CONFIG_LED_IO;
-    print_dec(usb_led);
-    if (usb_led & (1<<USB_LED_CAPS_LOCK))
-        USB_LED_CAPS_LOCK_ON;
-    else
-        USB_LED_CAPS_LOCK_OFF;
-
-    if (usb_led & (1<<USB_LED_NUM_LOCK))
-        USB_LED_NUM_LOCK_ON;
-    else
-        USB_LED_NUM_LOCK_OFF;
-    if (usb_led & (1<<USB_LED_SCROLL_LOCK))
-        USB_LED_SCROLL_LOCK_ON;
-    else
-        USB_LED_SCROLL_LOCK_OFF;
-	led_set_user(usb_led);
-}

keyboards/bpiphany/kitten_paw/kitten_paw.h

@@ -3,17 +3,6 @@
 
 #include "quantum.h"
 
-#define CONFIG_LED_IO \
-  DDRB |= (1<<7); \
-  DDRC |= (1<<5) | (1<<6);
-
-#define USB_LED_CAPS_LOCK_ON    PORTC &= ~(1<<6)
-#define USB_LED_CAPS_LOCK_OFF   PORTC |=  (1<<6)
-#define USB_LED_NUM_LOCK_ON     PORTB &= ~(1<<7)
-#define USB_LED_NUM_LOCK_OFF    PORTB |=  (1<<7)
-#define USB_LED_SCROLL_LOCK_ON  PORTC &= ~(1<<5)
-#define USB_LED_SCROLL_LOCK_OFF PORTC |=  (1<<5)
-
 // This a shortcut to help you visually see your layout.
 // The first section contains all of the arguements
 // The second converts the arguments into a two-dimensional array

keyboards/bpiphany/tiger_lily/config.h

@@ -44,6 +44,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #define UNUSED_PINS { B0, C4, D3 }
 
+#define LED_NUM_LOCK_PIN C5
+#define LED_CAPS_LOCK_PIN C6
+#define LED_SCROLL_LOCK_PIN B7
+#define LED_PIN_ON_STATE 0
+
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
 

keyboards/bpiphany/tiger_lily/tiger_lily.c

@@ -1,63 +1 @@
 #include "tiger_lily.h"
-
-void matrix_init_kb(void) {
-    // put your keyboard start-up code here
-    // runs once when the firmware starts up
-
-    matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-    // put your looping keyboard code here
-    // runs every cycle (a lot)
-
-    matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-    // put your per-action keyboard code here
-    // runs for every action, just before processing by the firmware
-
-    return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-    DDRB |= (1<<7);
-    DDRC |= (1<<5) | (1<<6);
-
-    print_dec(usb_led);
-
-    if (usb_led & (1<<USB_LED_NUM_LOCK))
-        PORTC &= ~(1<<5);
-    else
-        PORTC |=  (1<<5);
-
-    if (usb_led & (1<<USB_LED_SCROLL_LOCK))
-        PORTB &= ~(1<<7);
-    else
-        PORTB |=  (1<<7);
-
-    if (usb_led & (1<<USB_LED_CAPS_LOCK))
-        PORTC &= ~(1<<6);
-    else
-        PORTC |=  (1<<6);
-
-    led_set_user(usb_led);
-}
-
-__attribute__ ((weak))
-void matrix_init_user(void) {
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-}
-
-__attribute__ ((weak))
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-  return true;
-}
-
-__attribute__ ((weak))
-void led_set_user(uint8_t usb_led) {
-}

keyboards/bpiphany/unloved_bastard/config.h

@@ -35,6 +35,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
 
+#define LED_NUM_LOCK_PIN B7
+#define LED_CAPS_LOCK_PIN C5
+#define LED_SCROLL_LOCK_PIN C6
+#define LED_PIN_ON_STATE 0
+
 /* define if matrix has ghost (lacks anti-ghosting diodes) */
 //#define MATRIX_HAS_GHOST
 

keyboards/bpiphany/unloved_bastard/unloved_bastard.c

@@ -14,57 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "unloved_bastard.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-	led_init_ports();
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-    // put your per-action keyboard code here
-    // runs for every action, just before processing by the firmware
-    return process_record_user(keycode, record);
-}
-
-// C5 left
-// C6 middle led
-// B7 right led
-void led_init_ports(void) {
-    DDRB |= (1<<7);
-    DDRC |= (1<<5);
-    DDRC |= (1<<6);
-
-    PORTB |= (1<<7);
-    PORTC |= (1<<5);
-    PORTC |= (1<<6);
-}
-
-
-void led_set_kb(uint8_t usb_led) {
-
-    if (usb_led & (1<<USB_LED_CAPS_LOCK))
-        PORTC &= ~(1<<5);
-    else
-        PORTC |=  (1<<5);
-
-    if (usb_led & (1<<USB_LED_NUM_LOCK))
-        PORTB &= ~(1<<7);
-    else
-        PORTB |=  (1<<7);
-
-    if (usb_led & (1<<USB_LED_SCROLL_LOCK))
-        PORTC &= ~(1<<6);
-    else
-        PORTC |=  (1<<6);
-
-    led_set_user(usb_led);
-}

keyboards/gray_studio/space65/config.h

@@ -48,10 +48,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+#define LED_CAPS_LOCK_PIN E6
+#define LED_PIN_ON_STATE 0
 
 #define BACKLIGHT_PIN B7
 #define BACKLIGHT_BREATHING

keyboards/gray_studio/space65/space65.c

@@ -14,36 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "space65.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	setPinOutput(E6);
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-  if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
-    writePinLow(E6);
-  } else {
-    writePinHigh(E6);
-  }
-
-	led_set_user(usb_led);
-}

keyboards/gray_studio/think65/hotswap/config.h

@@ -46,6 +46,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define DIODE_DIRECTION COL2ROW
 
+#define LED_NUM_LOCK_PIN C6
+#define LED_CAPS_LOCK_PIN C7
+#define LED_SCROLL_LOCK_PIN F7
+#define LED_PIN_ON_STATE 0
+
 #define RGB_DI_PIN E2
 #ifdef RGB_DI_PIN
     #define RGBLED_NUM 22

keyboards/gray_studio/think65/hotswap/hotswap.c

@@ -14,58 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "hotswap.h"
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-
-void matrix_init_kb(void) {
-  // put your keyboard start-up code here
-  // runs once when the firmware starts up
-
-  setPinOutput(C6);
-  setPinOutput(C7);
-  setPinOutput(F7);
-  
-  matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-  // put your looping keyboard code here
-  // runs every cycle (a lot)
-
-  matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  // put your per-action keyboard code here
-  // runs for every action, just before processing by the firmware
-
-  return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-  if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
-    writePinLow(C7);
-  } else {
-    writePinHigh(C7);
-  }
-
-  if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
-    writePinLow(C6);
-  } else {
-    writePinHigh(C6);
-  }
-
-  if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) {
-    writePinLow(F7);
-  } else {
-    writePinHigh(F7);
-  }
-
-  led_set_user(usb_led);
-}
-

keyboards/kbdfans/kbd19x/config.h

@@ -47,6 +47,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
+
+#define LED_NUM_LOCK_PIN B2
+#define LED_CAPS_LOCK_PIN B0
+#define LED_SCROLL_LOCK_PIN B1
+
 #define BACKLIGHT_PIN B6
 #ifdef BACKLIGHT_PIN
 #define BACKLIGHT_LEVELS 3

keyboards/kbdfans/kbd19x/kbd19x.c

@@ -16,57 +16,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #include "kbd19x.h"
-
-extern inline void kbd19x_caps_led_on(void);
-extern inline void kbd19x_caps_led_off(void);
-
-extern inline void kbd19x_sclk_led_on(void);
-extern inline void kbd19x_sclk_led_off(void);
-
-extern inline void kbd19x_nmlk_led_on(void);
-extern inline void kbd19x_nmlk_led_off(void);
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-  if (usb_led & (1<<USB_LED_NUM_LOCK)) {
-    kbd19x_nmlk_led_on();
-  } else {
-    kbd19x_nmlk_led_off();
-  }
-
-  if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-    kbd19x_caps_led_on();
-  } else {
-    kbd19x_caps_led_off();
-  }
-
-  if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {
-    kbd19x_sclk_led_on();
-  } else {
-    kbd19x_sclk_led_off();
-  }
-
-  led_set_user(usb_led);
-}

keyboards/kbdfans/kbd19x/kbd19x.h

@@ -20,14 +20,14 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "quantum.h"
 #include "led.h"
 
-inline void kbd19x_caps_led_on(void)    { DDRB |=  (1<<0); PORTB &= ~(1<<0); }
-inline void kbd19x_caps_led_off(void)   { DDRB &= ~(1<<0); PORTB &= ~(1<<0); }
+inline void kbd19x_caps_led_on(void)    { writePinHigh(LED_CAPS_LOCK_PIN); }
+inline void kbd19x_caps_led_off(void)   { writePinLow(LED_CAPS_LOCK_PIN); }
 
-inline void kbd19x_sclk_led_on(void)    { DDRB |=  (1<<1); PORTB &= ~(1<<1); }
-inline void kbd19x_sclk_led_off(void)   { DDRB &= ~(1<<1); PORTB &= ~(1<<1); }
+inline void kbd19x_sclk_led_on(void)    { writePinHigh(LED_SCROLL_LOCK_PIN); }
+inline void kbd19x_sclk_led_off(void)   { writePinLow(LED_SCROLL_LOCK_PIN); }
 
-inline void kbd19x_nmlk_led_on(void)    { DDRB |=  (1<<2); PORTB &= ~(1<<2); }
-inline void kbd19x_nmlk_led_off(void)   { DDRB &= ~(1<<2); PORTB &= ~(1<<2); }
+inline void kbd19x_nmlk_led_on(void)    { writePinHigh(LED_NUM_LOCK_PIN); }
+inline void kbd19x_nmlk_led_off(void)   { writePinLow(LED_NUM_LOCK_PIN); }
 
 // readability
 #define XXX KC_NO

keyboards/kbdfans/kbd67/rev1/config.h

@@ -48,6 +48,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
+#define LED_CAPS_LOCK_PIN B2
+
 #define BACKLIGHT_PIN B6
 #ifdef BACKLIGHT_PIN
 #define BACKLIGHT_BREATHING

keyboards/kbdfans/kbd67/rev1/rev1.c

@@ -14,38 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "rev1.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-		DDRB |= (1 << 2);
-		PORTB &= ~(1 << 2);
-	} else {
-		DDRB &= ~(1 << 2);
-		PORTB &= ~(1 << 2);
-	}
-
-	led_set_user(usb_led);
-}

keyboards/kbdfans/kbd6x/config.h

@@ -47,6 +47,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
+
+#define LED_CAPS_LOCK_PIN B6
+
 #define BACKLIGHT_PIN B7
 #ifdef BACKLIGHT_PIN
 #define BACKLIGHT_BREATHING

keyboards/kbdfans/kbd6x/kbd6x.c

@@ -14,36 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "kbd6x.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
-		DDRB |= (1 << 6); 
-		PORTB &= ~(1 << 6);
-	} else {
-		DDRB &= ~(1 << 6); 
-		PORTB &= ~(1 << 6);
-	}
-	
-	led_set_user(usb_led);
-}

keyboards/kbdfans/kbd75/config.h

@@ -20,6 +20,9 @@
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 
+#define LED_CAPS_LOCK_PIN B2
+#define LED_PIN_ON_STATE 0
+
 /* number of backlight levels */
 #define BACKLIGHT_PIN B6
 #ifdef BACKLIGHT_PIN

keyboards/kbdfans/kbd75/rev1/rev1.c

@@ -1,17 +1 @@
 #include "rev1.h"
-
-void led_set_kb(uint8_t usb_led) {
-  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-  if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
-    writePinLow(B2);
-  } else {
-    writePinHigh(B2);
-  }
-
-  led_set_user(usb_led);
-}
-
-void matrix_init_kb(void) {
-  setPinOutput(B2);
-  matrix_init_user();
-}

keyboards/kbdfans/kbd75/rev2/rev2.c

@@ -1,17 +1 @@
 #include "rev2.h"
-
-void led_set_kb(uint8_t usb_led) {
-  // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-  if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
-    writePinLow(B2);
-  } else {
-    writePinHigh(B2);
-  }
-
-  led_set_user(usb_led);
-}
-
-void matrix_init_kb(void) {
-  setPinOutput(B2);
-  matrix_init_user();
-}

keyboards/kbdfans/kbd8x/config.h

@@ -47,6 +47,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
+
+#define LED_NUM_LOCK_PIN B1
+#define LED_CAPS_LOCK_PIN B3
+#define LED_SCROLL_LOCK_PIN B2
+
 #define BACKLIGHT_PIN B6
 #ifdef BACKLIGHT_PIN
 #define BACKLIGHT_BREATHING

keyboards/kbdfans/kbd8x/kbd8x.c

@@ -15,58 +15,3 @@
  */
 
 #include "kbd8x.h"
-
-extern inline void caps_led_off(void);
-extern inline void caps_led_on(void);
-extern inline void num_led_off(void);
-extern inline void num_led_on(void);
-extern inline void scroll_led_off(void);
-extern inline void scroll_led_on(void);
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-
-	matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-
-	matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-	// put your per-action keyboard code here
-	// runs for every action, just before processing by the firmware
-
-	return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
-  if(usb_led & (1<<USB_LED_NUM_LOCK))
-    {
-        num_led_on();
-    } else {
-        num_led_off();
-    }
-
-    if(usb_led & (1<<USB_LED_CAPS_LOCK))
-    {
-        caps_led_on();
-    } else {
-        caps_led_off();
-    }
-
-    if(usb_led & (1<<USB_LED_SCROLL_LOCK))
-    {
-        scroll_led_on();
-    } else {
-        scroll_led_off();
-    }
-
-	led_set_user(usb_led);
-}

keyboards/kbdfans/kbd8x/kbd8x.h

@@ -19,15 +19,14 @@
 #include "led.h"
 
 // Functions for setting LEDs on toggle keys
-inline void caps_led_on(void)     { DDRB |=  (1<<3); PORTB &= ~(1<<3); }
-inline void caps_led_off(void)    { DDRB &= ~(1<<3); PORTB &= ~(1<<3); }
+inline void caps_led_on(void)     { writePinHigh(LED_CAPS_LOCK_PIN); }
+inline void caps_led_off(void)    { writePinLow(LED_CAPS_LOCK_PIN); }
 
-inline void num_led_on(void)      { DDRB |=  (1<<1); PORTB &= ~(1<<1); }
-inline void num_led_off(void)     { DDRB &= ~(1<<1); PORTB &= ~(1<<1); }
-
-inline void scroll_led_on(void)   { DDRB |=  (1<<2); PORTB &= ~(1<<2); }
-inline void scroll_led_off(void)  { DDRB &= ~(1<<2); PORTB &= ~(1<<2); }
+inline void num_led_on(void)      { writePinHigh(LED_NUM_LOCK_PIN); }
+inline void num_led_off(void)     { writePinLow(LED_NUM_LOCK_PIN); }
 
+inline void scroll_led_on(void)   { writePinHigh(LED_SCROLL_LOCK_PIN); }
+inline void scroll_led_off(void)  { writePinLow(LED_SCROLL_LOCK_PIN); }
 
 // LAYOUT depicting all possible switch positions.
 // LAYOUT_all supports ISO, split backspace and split left/right shift.

keyboards/kbdfans/kbd8x_mk2/config.h

@@ -48,10 +48,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+#define LED_CAPS_LOCK_PIN E6
+#define LED_SCROLL_LOCK_PIN B2
+#define LED_PIN_ON_STATE 0
+
 #define BACKLIGHT_PIN B7
 #ifdef BACKLIGHT_PIN
 #define BACKLIGHT_BREATHING

keyboards/kbdfans/kbd8x_mk2/kbd8x_mk2.c

@@ -14,58 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "kbd8x_mk2.h"
-
-void matrix_init_kb(void) {  
-
-  // Indicator pins
-  // B2 - Scroll Lock
-  // E6 - Caps Lock
-  // Sinking setup - 5V -> LED/Resistor -> Pin
-  
-  setPinOutput(B2);
-  setPinOutput(E6);
-
-  matrix_init_user();
-}
-
-void led_set_kb(uint8_t usb_led) {
-  
-  // Toggle indicator LEDs
-  // Since they are a sinking setup, write HIGH to DISABLE, LOW to ENABLE
-  
-  if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
-    writePinLow(E6);
-  } else {
-    writePinHigh(E6);
-  }
-  
-  if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) {
-    writePinLow(B2);
-  } else {
-    writePinHigh(B2);
-  }
-
-  led_set_user(usb_led);
-}
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-/*
-
-void matrix_scan_kb(void) {
-  // put your looping keyboard code here
-  // runs every cycle (a lot)
-
-  matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  // put your per-action keyboard code here
-  // runs for every action, just before processing by the firmware
-
-  return process_record_user(keycode, record);
-}
-
-*/

keyboards/kbdfans/kbdpad_mk2/config.h

@@ -48,10 +48,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* COL2ROW, ROW2COL*/
 #define DIODE_DIRECTION COL2ROW
 
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+#define LED_CAPS_LOCK_PIN B4
+#define LED_PIN_ON_STATE 0
 
 #define BACKLIGHT_PIN B7
 #ifdef BACKLIGHT_PIN

keyboards/kbdfans/kbdpad_mk2/kbdpad_mk2.c

@@ -14,48 +14,3 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include "kbdpad_mk2.h"
-
-void matrix_init_kb(void) {
-	
-  // Num Lock LED = B4
-  // Sinking setup (5V -> LED/Res -> Pin)
-  
-  setPinOutput(B4);
-
-  matrix_init_user();
-}
-
-void led_set_kb(uint8_t usb_led) {
-  
-  // Sinking setup. Write HIGH to turn OFF, LOW to turn ON.
-  
-  if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
-    writePinLow(B4);
-  } else {
-    writePinHigh(B4);
-  }
-
-  led_set_user(usb_led);
-}
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-/*
-
-void matrix_scan_kb(void) {
-  // put your looping keyboard code here
-  // runs every cycle (a lot)
-
-  matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-  // put your per-action keyboard code here
-  // runs for every action, just before processing by the firmware
-
-  return process_record_user(keycode, record);
-}
-
-*/