Damien
9 years ago
committed by
GitHub
commit
af24ea558a
@ -0,0 +1,221 @@ |
||||
ifndef VERBOSE |
||||
.SILENT: |
||||
endif |
||||
|
||||
.DEFAULT_GOAL := all
|
||||
|
||||
include common.mk |
||||
|
||||
ifneq ($(SUBPROJECT),) |
||||
TARGET ?= $(KEYBOARD)_$(SUBPROJECT)_$(KEYMAP)
|
||||
KEYBOARD_OUTPUT := $(BUILD_DIR)/obj_$(KEYBOARD)_$(SUBPROJECT)
|
||||
else |
||||
TARGET ?= $(KEYBOARD)_$(KEYMAP)
|
||||
KEYBOARD_OUTPUT := $(BUILD_DIR)/obj_$(KEYBOARD)
|
||||
endif |
||||
|
||||
# Force expansion
|
||||
TARGET := $(TARGET)
|
||||
|
||||
|
||||
MASTER ?= left
|
||||
ifdef master |
||||
MASTER = $(master)
|
||||
endif |
||||
|
||||
ifeq ($(MASTER),right)
|
||||
OPT_DEFS += -DMASTER_IS_ON_RIGHT
|
||||
else
|
||||
ifneq ($(MASTER),left)
|
||||
$(error MASTER does not have a valid value(left/right)) |
||||
endif
|
||||
endif |
||||
|
||||
|
||||
|
||||
KEYBOARD_PATH := keyboards/$(KEYBOARD)
|
||||
KEYBOARD_C := $(KEYBOARD_PATH)/$(KEYBOARD).c
|
||||
|
||||
ifneq ("$(wildcard $(KEYBOARD_C))","") |
||||
include $(KEYBOARD_PATH)/rules.mk
|
||||
else
|
||||
$(error "$(KEYBOARD_C)" does not exist)
|
||||
endif |
||||
|
||||
|
||||
ifneq ($(SUBPROJECT),) |
||||
SUBPROJECT_PATH := keyboards/$(KEYBOARD)/$(SUBPROJECT)
|
||||
SUBPROJECT_C := $(SUBPROJECT_PATH)/$(SUBPROJECT).c
|
||||
ifneq ("$(wildcard $(SUBPROJECT_C))","")
|
||||
OPT_DEFS += -DSUBPROJECT_$(SUBPROJECT)
|
||||
include $(SUBPROJECT_PATH)/rules.mk
|
||||
else
|
||||
$(error "$(SUBPROJECT_PATH)/$(SUBPROJECT).c" does not exist)
|
||||
endif
|
||||
endif |
||||
|
||||
# We can assume a ChibiOS target When MCU_FAMILY is defined, since it's not used for LUFA
|
||||
ifdef MCU_FAMILY |
||||
PLATFORM=CHIBIOS
|
||||
else |
||||
PLATFORM=AVR
|
||||
endif |
||||
|
||||
ifeq ($(PLATFORM),CHIBIOS) |
||||
include $(TMK_PATH)/protocol/chibios.mk
|
||||
include $(TMK_PATH)/chibios.mk
|
||||
OPT_OS = chibios
|
||||
ifneq ("$(wildcard $(SUBPROJECT_PATH)/bootloader_defs.h)","")
|
||||
OPT_DEFS += -include $(SUBPROJECT_PATH)/bootloader_defs.h
|
||||
else ifneq ("$(wildcard $(SUBPROJECT_PATH)/boards/$(BOARD)/bootloader_defs.h)","")
|
||||
OPT_DEFS += -include $(SUBPROJECT_PATH)/boards/$(BOARD)/bootloader_defs.h
|
||||
else ifneq ("$(wildcard $(KEYBOARD_PATH)/bootloader_defs.h)","")
|
||||
OPT_DEFS += -include $(KEYBOARD_PATH)/bootloader_defs.h
|
||||
else ifneq ("$(wildcard $(KEYBOARD_PATH)/boards/$(BOARD)/bootloader_defs.h)","")
|
||||
OPT_DEFS += -include $(KEYBOARD_PATH)/boards/$(BOARD)/bootloader_defs.h
|
||||
endif
|
||||
endif |
||||
|
||||
CONFIG_H = $(KEYBOARD_PATH)/config.h
|
||||
ifneq ($(SUBPROJECT),) |
||||
ifneq ("$(wildcard $(SUBPROJECT_C))","")
|
||||
CONFIG_H = $(SUBPROJECT_PATH)/config.h
|
||||
endif
|
||||
endif |
||||
|
||||
# Save the defines and includes here, so we don't include any keymap specific ones
|
||||
PROJECT_DEFS := $(OPT_DEFS)
|
||||
PROJECT_INC := $(VPATH) $(EXTRAINCDIRS) $(SUBPROJECT_PATH) $(KEYBOARD_PATH)
|
||||
PROJECT_CONFIG := $(CONFIG_H)
|
||||
|
||||
MAIN_KEYMAP_PATH := $(KEYBOARD_PATH)/keymaps/$(KEYMAP)
|
||||
MAIN_KEYMAP_C := $(MAIN_KEYMAP_PATH)/keymap.c
|
||||
SUBPROJ_KEYMAP_PATH := $(SUBPROJECT_PATH)/keymaps/$(KEYMAP)
|
||||
SUBPROJ_KEYMAP_C := $(SUBPROJ_KEYMAP_PATH)/keymap.c
|
||||
ifneq ("$(wildcard $(SUBPROJ_KEYMAP_C))","") |
||||
-include $(SUBPROJ_KEYMAP_PATH)/Makefile
|
||||
KEYMAP_C := $(SUBPROJ_KEYMAP_C)
|
||||
KEYMAP_PATH := $(SUBPROJ_KEYMAP_PATH)
|
||||
else ifneq ("$(wildcard $(MAIN_KEYMAP_C))","") |
||||
-include $(MAIN_KEYMAP_PATH)/Makefile
|
||||
KEYMAP_C := $(MAIN_KEYMAP_C)
|
||||
KEYMAP_PATH := $(MAIN_KEYMAP_PATH)
|
||||
else |
||||
$(error "$(MAIN_KEYMAP_C)/keymap.c" does not exist)
|
||||
endif |
||||
|
||||
|
||||
# Object files directory
|
||||
# To put object files in current directory, use a dot (.), do NOT make
|
||||
# this an empty or blank macro!
|
||||
KEYMAP_OUTPUT := $(BUILD_DIR)/obj_$(TARGET)
|
||||
|
||||
|
||||
ifneq ("$(wildcard $(KEYMAP_PATH)/config.h)","") |
||||
CONFIG_H = $(KEYMAP_PATH)/config.h
|
||||
endif |
||||
|
||||
# # project specific files
|
||||
SRC += $(KEYBOARD_C) \
|
||||
$(KEYMAP_C) \
|
||||
$(QUANTUM_DIR)/quantum.c \
|
||||
$(QUANTUM_DIR)/keymap_common.c \
|
||||
$(QUANTUM_DIR)/keycode_config.c \
|
||||
$(QUANTUM_DIR)/process_keycode/process_leader.c
|
||||
|
||||
ifneq ($(SUBPROJECT),) |
||||
SRC += $(SUBPROJECT_C)
|
||||
endif |
||||
|
||||
ifndef CUSTOM_MATRIX |
||||
SRC += $(QUANTUM_DIR)/matrix.c
|
||||
endif |
||||
|
||||
ifeq ($(strip $(MIDI_ENABLE)), yes) |
||||
OPT_DEFS += -DMIDI_ENABLE
|
||||
SRC += $(QUANTUM_DIR)/process_keycode/process_midi.c
|
||||
endif |
||||
|
||||
ifeq ($(strip $(VIRTSER_ENABLE)), yes) |
||||
OPT_DEFS += -DVIRTSER_ENABLE
|
||||
endif |
||||
|
||||
ifeq ($(strip $(AUDIO_ENABLE)), yes) |
||||
OPT_DEFS += -DAUDIO_ENABLE
|
||||
SRC += $(QUANTUM_DIR)/process_keycode/process_music.c
|
||||
SRC += $(QUANTUM_DIR)/audio/audio.c
|
||||
SRC += $(QUANTUM_DIR)/audio/voices.c
|
||||
SRC += $(QUANTUM_DIR)/audio/luts.c
|
||||
endif |
||||
|
||||
ifeq ($(strip $(UNICODE_ENABLE)), yes) |
||||
OPT_DEFS += -DUNICODE_ENABLE
|
||||
SRC += $(QUANTUM_DIR)/process_keycode/process_unicode.c
|
||||
endif |
||||
|
||||
ifeq ($(strip $(RGBLIGHT_ENABLE)), yes) |
||||
OPT_DEFS += -DRGBLIGHT_ENABLE
|
||||
SRC += $(QUANTUM_DIR)/light_ws2812.c
|
||||
SRC += $(QUANTUM_DIR)/rgblight.c
|
||||
endif |
||||
|
||||
ifeq ($(strip $(TAP_DANCE_ENABLE)), yes) |
||||
OPT_DEFS += -DTAP_DANCE_ENABLE
|
||||
SRC += $(QUANTUM_DIR)/process_keycode/process_tap_dance.c
|
||||
endif |
||||
|
||||
ifeq ($(strip $(SERIAL_LINK_ENABLE)), yes) |
||||
SRC += $(patsubst $(QUANTUM_PATH)/%,%,$(SERIAL_SRC))
|
||||
OPT_DEFS += $(SERIAL_DEFS)
|
||||
VAPTH += $(SERIAL_PATH)
|
||||
endif |
||||
|
||||
# Optimize size but this may cause error "relocation truncated to fit"
|
||||
#EXTRALDFLAGS = -Wl,--relax
|
||||
|
||||
# Search Path
|
||||
VPATH += $(KEYMAP_PATH)
|
||||
ifneq ($(SUBPROJECT),) |
||||
VPATH += $(SUBPROJECT_PATH)
|
||||
endif |
||||
VPATH += $(KEYBOARD_PATH)
|
||||
VPATH += $(COMMON_VPATH)
|
||||
|
||||
|
||||
include $(TMK_PATH)/common.mk |
||||
SRC += $(TMK_COMMON_SRC)
|
||||
OPT_DEFS += $(TMK_COMMON_DEFS)
|
||||
EXTRALDFLAGS += $(TMK_COMMON_LDFLAGS)
|
||||
|
||||
ifeq ($(PLATFORM),AVR) |
||||
include $(TMK_PATH)/protocol/lufa.mk
|
||||
include $(TMK_PATH)/avr.mk
|
||||
endif |
||||
|
||||
ifeq ($(strip $(VISUALIZER_ENABLE)), yes) |
||||
VISUALIZER_DIR = $(QUANTUM_DIR)/visualizer
|
||||
VISUALIZER_PATH = $(QUANTUM_PATH)/visualizer
|
||||
include $(VISUALIZER_PATH)/visualizer.mk
|
||||
endif |
||||
|
||||
OUTPUTS := $(KEYMAP_OUTPUT) $(KEYBOARD_OUTPUT)
|
||||
$(KEYMAP_OUTPUT)_SRC := $(SRC)
|
||||
$(KEYMAP_OUTPUT)_DEFS := $(OPT_DEFS) -DQMK_KEYBOARD=\"$(KEYBOARD)\" -DQMK_KEYMAP=\"$(KEYMAP)\"
|
||||
$(KEYMAP_OUTPUT)_INC := $(VPATH) $(EXTRAINCDIRS)
|
||||
$(KEYMAP_OUTPUT)_CONFIG := $(CONFIG_H)
|
||||
$(KEYBOARD_OUTPUT)_SRC := $(CHIBISRC)
|
||||
$(KEYBOARD_OUTPUT)_DEFS := $(PROJECT_DEFS)
|
||||
$(KEYBOARD_OUTPUT)_INC := $(PROJECT_INC)
|
||||
$(KEYBOARD_OUTPUT)_CONFIG := $(PROJECT_CONFIG)
|
||||
|
||||
# Default target.
|
||||
all: build sizeafter |
||||
|
||||
# Change the build target to build a HEX file or a library.
|
||||
build: elf hex |
||||
#build: elf hex eep lss sym
|
||||
#build: lib
|
||||
|
||||
|
||||
include $(TMK_PATH)/rules.mk |
||||
|
||||
@ -0,0 +1,57 @@ |
||||
ifndef VERBOSE |
||||
.SILENT: |
||||
endif |
||||
|
||||
.DEFAULT_GOAL := all
|
||||
|
||||
include common.mk |
||||
|
||||
TARGET=test/$(TEST)
|
||||
|
||||
GTEST_OUTPUT = $(BUILD_DIR)/gtest
|
||||
|
||||
TEST_OBJ = $(BUILD_DIR)/test_obj
|
||||
|
||||
OUTPUTS := $(TEST_OBJ)/$(TEST) $(GTEST_OUTPUT)
|
||||
|
||||
GTEST_INC := \
|
||||
$(LIB_PATH)/googletest/googletest/include\
|
||||
$(LIB_PATH)/googletest/googlemock/include\
|
||||
|
||||
GTEST_INTERNAL_INC :=\
|
||||
$(LIB_PATH)/googletest/googletest\
|
||||
$(LIB_PATH)/googletest/googlemock
|
||||
|
||||
$(GTEST_OUTPUT)_SRC :=\
|
||||
googletest/src/gtest-all.cc\
|
||||
googletest/src/gtest_main.cc\
|
||||
googlemock/src/gmock-all.cc
|
||||
|
||||
$(GTEST_OUTPUT)_DEFS :=
|
||||
$(GTEST_OUTPUT)_INC := $(GTEST_INC) $(GTEST_INTERNAL_INC)
|
||||
|
||||
LDFLAGS += -lstdc++ -lpthread -shared-libgcc
|
||||
CREATE_MAP := no
|
||||
|
||||
VPATH +=\
|
||||
$(LIB_PATH)/googletest\
|
||||
$(LIB_PATH)/googlemock
|
||||
|
||||
all: elf |
||||
|
||||
VPATH += $(COMMON_VPATH)
|
||||
|
||||
include $(TMK_PATH)/common.mk |
||||
include $(QUANTUM_PATH)/serial_link/tests/rules.mk |
||||
|
||||
$(TEST_OBJ)/$(TEST)_SRC := $($(TEST)_SRC) |
||||
$(TEST_OBJ)/$(TEST)_INC := $($(TEST)_INC) $(VPATH) $(GTEST_INC) |
||||
$(TEST_OBJ)/$(TEST)_DEFS := $($(TEST)_DEFS) |
||||
|
||||
include $(TMK_PATH)/native.mk |
||||
include $(TMK_PATH)/rules.mk |
||||
|
||||
|
||||
$(shell mkdir -p $(BUILD_DIR)/test 2>/dev/null) |
||||
$(shell mkdir -p $(TEST_OBJ) 2>/dev/null) |
||||
|
||||
@ -0,0 +1,26 @@ |
||||
include message.mk |
||||
|
||||
# Directory common source files exist
|
||||
TOP_DIR = .
|
||||
TMK_DIR = tmk_core
|
||||
TMK_PATH = $(TOP_DIR)/$(TMK_DIR)
|
||||
LIB_PATH = $(TOP_DIR)/lib
|
||||
|
||||
QUANTUM_DIR = quantum
|
||||
QUANTUM_PATH = $(TOP_DIR)/$(QUANTUM_DIR)
|
||||
|
||||
BUILD_DIR := $(TOP_DIR)/.build
|
||||
|
||||
SERIAL_DIR := $(QUANTUM_DIR)/serial_link
|
||||
SERIAL_PATH := $(QUANTUM_PATH)/serial_link
|
||||
SERIAL_SRC := $(wildcard $(SERIAL_PATH)/protocol/*.c)
|
||||
SERIAL_SRC += $(wildcard $(SERIAL_PATH)/system/*.c)
|
||||
SERIAL_DEFS += -DSERIAL_LINK_ENABLE
|
||||
|
||||
COMMON_VPATH := $(TOP_DIR)
|
||||
COMMON_VPATH += $(TMK_PATH)
|
||||
COMMON_VPATH += $(QUANTUM_PATH)
|
||||
COMMON_VPATH += $(QUANTUM_PATH)/keymap_extras
|
||||
COMMON_VPATH += $(QUANTUM_PATH)/audio
|
||||
COMMON_VPATH += $(QUANTUM_PATH)/process_keycode
|
||||
COMMON_VPATH += $(SERIAL_PATH)
|
||||
@ -1,70 +1,3 @@ |
||||
|
||||
|
||||
# Target file name (without extension).
|
||||
|
||||
# project specific files
|
||||
SRC = led.c
|
||||
|
||||
# MCU name
|
||||
MCU = atmega32u2
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
||||
#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
|
||||
|
||||
ifndef QUANTUM_DIR |
||||
ifndef MAKEFILE_INCLUDED |
||||
include ../../Makefile
|
||||
endif |
||||
@ -0,0 +1,66 @@ |
||||
|
||||
|
||||
# Target file name (without extension).
|
||||
|
||||
# project specific files
|
||||
SRC = led.c
|
||||
|
||||
# MCU name
|
||||
MCU = atmega32u2
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
||||
#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
|
||||
@ -1,70 +1,3 @@ |
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= no # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
RGBLIGHT_ENABLE ?= yes # Enable keyboard underlight functionality (+4870)
|
||||
BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150)
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
AUDIO_ENABLE ?= no
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
|
||||
ifndef QUANTUM_DIR |
||||
ifndef MAKEFILE_INCLUDED |
||||
include ../../Makefile
|
||||
endif |
||||
endif |
||||
@ -0,0 +1,66 @@ |
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= no # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
RGBLIGHT_ENABLE ?= yes # Enable keyboard underlight functionality (+4870)
|
||||
BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality (+1150)
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
AUDIO_ENABLE ?= no
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
@ -1,74 +1,3 @@ |
||||
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=512
|
||||
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE ?= no # Audio output on port C6
|
||||
|
||||
ifndef QUANTUM_DIR |
||||
ifndef MAKEFILE_INCLUDED |
||||
include ../../Makefile
|
||||
endif |
||||
@ -0,0 +1,70 @@ |
||||
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=512
|
||||
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE ?= no # Audio output on port C6
|
||||
@ -1,73 +1,3 @@ |
||||
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= no # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
AUDIO_ENABLE ?= no # Audio output on port C6
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
|
||||
ifndef QUANTUM_DIR |
||||
ifndef MAKEFILE_INCLUDED |
||||
include ../../Makefile
|
||||
endif |
||||
@ -0,0 +1,69 @@ |
||||
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= no # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
AUDIO_ENABLE ?= no # Audio output on port C6
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
@ -1,88 +1,3 @@ |
||||
|
||||
|
||||
ifdef TEENSY2 |
||||
OPT_DEFS += -DATREUS_TEENSY2
|
||||
ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex
|
||||
else |
||||
OPT_DEFS += -DATREUS_ASTAR
|
||||
OPT_DEFS += -DCATERINA_BOOTLOADER
|
||||
ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
|
||||
avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
|
||||
endif |
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - not yet supported in LUFA
|
||||
# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
|
||||
# MIDI_ENABLE ?= YES # MIDI controls
|
||||
UNICODE_ENABLE ?= YES # Unicode
|
||||
# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
|
||||
|
||||
ifndef QUANTUM_DIR |
||||
ifndef MAKEFILE_INCLUDED |
||||
include ../../Makefile
|
||||
endif |
||||
|
||||
USB ?= /dev/cu.usbmodem1411
|
||||
|
||||
upload: build |
||||
$(ATREUS_UPLOAD_COMMAND)
|
||||
|
||||
endif |
||||
@ -0,0 +1,82 @@ |
||||
|
||||
|
||||
ifdef TEENSY2 |
||||
OPT_DEFS += -DATREUS_TEENSY2
|
||||
ATRUES_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex
|
||||
else |
||||
OPT_DEFS += -DATREUS_ASTAR
|
||||
OPT_DEFS += -DCATERINA_BOOTLOADER
|
||||
ATRUES_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
|
||||
avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
|
||||
endif |
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - not yet supported in LUFA
|
||||
# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
|
||||
# MIDI_ENABLE ?= YES # MIDI controls
|
||||
UNICODE_ENABLE ?= YES # Unicode
|
||||
# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
|
||||
USB ?= /dev/cu.usbmodem1411
|
||||
|
||||
upload: build |
||||
$(ATRUES_UPLOAD_COMMAND)
|
||||
@ -1,72 +1,3 @@ |
||||
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=512
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
|
||||
# NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
|
||||
# MIDI_ENABLE ?= YES # MIDI controls
|
||||
# UNICODE_ENABLE ?= YES # Unicode
|
||||
# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
|
||||
ifndef QUANTUM_DIR |
||||
ifndef MAKEFILE_INCLUDED |
||||
include ../../Makefile
|
||||
endif |
||||
|
||||
endif |
||||
@ -0,0 +1,67 @@ |
||||
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=512
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
|
||||
# NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
|
||||
# MIDI_ENABLE ?= YES # MIDI controls
|
||||
# UNICODE_ENABLE ?= YES # Unicode
|
||||
# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
@ -1,14 +1,5 @@ |
||||
SUBPROJECT_DEFAULT = stm32_f072_onekey
|
||||
|
||||
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control
|
||||
CONSOLE_ENABLE ?= yes # Console for debug
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover
|
||||
CUSTOM_MATRIX ?= yes # Custom matrix file
|
||||
|
||||
ifndef QUANTUM_DIR |
||||
ifndef MAKEFILE_INCLUDED |
||||
include ../../Makefile
|
||||
endif |
||||
@ -1,49 +1,49 @@ |
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio |
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License"); |
||||
you may not use this file except in compliance with the License. |
||||
You may obtain a copy of the License at |
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software |
||||
distributed under the License is distributed on an "AS IS" BASIS, |
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
||||
See the License for the specific language governing permissions and |
||||
limitations under the License. |
||||
*/ |
||||
|
||||
#include "hal.h" |
||||
|
||||
/**
|
||||
* @brief PAL setup. |
||||
* @details Digital I/O ports static configuration as defined in @p board.h. |
||||
* This variable is used by the HAL when initializing the PAL driver. |
||||
*/ |
||||
#if HAL_USE_PAL || defined(__DOXYGEN__) |
||||
const PALConfig pal_default_config = |
||||
{ |
||||
{VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH}, |
||||
{VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH}, |
||||
{VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH}, |
||||
{VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH}, |
||||
{VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH}, |
||||
}; |
||||
#endif |
||||
|
||||
/*
|
||||
* Early initialization code. |
||||
* This initialization must be performed just after stack setup and before |
||||
* any other initialization. |
||||
*/ |
||||
void __early_init(void) { |
||||
|
||||
stm32_clock_init(); |
||||
} |
||||
|
||||
/*
|
||||
* Board-specific initialization code. |
||||
*/ |
||||
void boardInit(void) { |
||||
} |
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio |
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License"); |
||||
you may not use this file except in compliance with the License. |
||||
You may obtain a copy of the License at |
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software |
||||
distributed under the License is distributed on an "AS IS" BASIS, |
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
||||
See the License for the specific language governing permissions and |
||||
limitations under the License. |
||||
*/ |
||||
|
||||
#include "hal.h" |
||||
|
||||
/**
|
||||
* @brief PAL setup. |
||||
* @details Digital I/O ports static configuration as defined in @p board.h. |
||||
* This variable is used by the HAL when initializing the PAL driver. |
||||
*/ |
||||
#if HAL_USE_PAL || defined(__DOXYGEN__) |
||||
const PALConfig pal_default_config = |
||||
{ |
||||
{VAL_GPIOAODR, VAL_GPIOACRL, VAL_GPIOACRH}, |
||||
{VAL_GPIOBODR, VAL_GPIOBCRL, VAL_GPIOBCRH}, |
||||
{VAL_GPIOCODR, VAL_GPIOCCRL, VAL_GPIOCCRH}, |
||||
{VAL_GPIODODR, VAL_GPIODCRL, VAL_GPIODCRH}, |
||||
{VAL_GPIOEODR, VAL_GPIOECRL, VAL_GPIOECRH}, |
||||
}; |
||||
#endif |
||||
|
||||
/*
|
||||
* Early initialization code. |
||||
* This initialization must be performed just after stack setup and before |
||||
* any other initialization. |
||||
*/ |
||||
void __early_init(void) { |
||||
|
||||
stm32_clock_init(); |
||||
} |
||||
|
||||
/*
|
||||
* Board-specific initialization code. |
||||
*/ |
||||
void boardInit(void) { |
||||
} |
||||
|
||||
@ -1,166 +1,166 @@ |
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio |
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License"); |
||||
you may not use this file except in compliance with the License. |
||||
You may obtain a copy of the License at |
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software |
||||
distributed under the License is distributed on an "AS IS" BASIS, |
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
||||
See the License for the specific language governing permissions and |
||||
limitations under the License. |
||||
*/ |
||||
|
||||
#ifndef _BOARD_H_ |
||||
#define _BOARD_H_ |
||||
|
||||
/*
|
||||
* Setup for a Generic STM32F103 board. |
||||
*/ |
||||
|
||||
/*
|
||||
* Board identifier. |
||||
*/ |
||||
#define BOARD_GENERIC_STM32_F103 |
||||
#define BOARD_NAME "Generic STM32F103x board" |
||||
|
||||
/*
|
||||
* Board frequencies. |
||||
*/ |
||||
#define STM32_LSECLK 32768 |
||||
#define STM32_HSECLK 8000000 |
||||
|
||||
/*
|
||||
* MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h. |
||||
*/ |
||||
#define STM32F103xB |
||||
|
||||
/*
|
||||
* IO pins assignments |
||||
*/ |
||||
|
||||
/* on-board */ |
||||
|
||||
#define GPIOC_LED 13 |
||||
#define GPIOD_OSC_IN 0 |
||||
#define GPIOD_OSC_OUT 1 |
||||
|
||||
/* In case your board has a "USB enable" hardware
|
||||
controlled by a pin, define it here. (It could be just |
||||
a 1.5k resistor connected to D+ line.) |
||||
*/ |
||||
/*
|
||||
#define GPIOB_USB_DISC 10 |
||||
*/ |
||||
|
||||
/*
|
||||
* I/O ports initial setup, this configuration is established soon after reset |
||||
* in the initialization code. |
||||
* |
||||
* The digits have the following meaning: |
||||
* 0 - Analog input. |
||||
* 1 - Push Pull output 10MHz. |
||||
* 2 - Push Pull output 2MHz. |
||||
* 3 - Push Pull output 50MHz. |
||||
* 4 - Digital input. |
||||
* 5 - Open Drain output 10MHz. |
||||
* 6 - Open Drain output 2MHz. |
||||
* 7 - Open Drain output 50MHz. |
||||
* 8 - Digital input with PullUp or PullDown resistor depending on ODR. |
||||
* 9 - Alternate Push Pull output 10MHz. |
||||
* A - Alternate Push Pull output 2MHz. |
||||
* B - Alternate Push Pull output 50MHz. |
||||
* C - Reserved. |
||||
* D - Alternate Open Drain output 10MHz. |
||||
* E - Alternate Open Drain output 2MHz. |
||||
* F - Alternate Open Drain output 50MHz. |
||||
* Please refer to the STM32 Reference Manual for details. |
||||
*/ |
||||
|
||||
/*
|
||||
* Port A setup. |
||||
* Everything input with pull-up except: |
||||
* PA2 - Alternate output (USART2 TX). |
||||
* PA3 - Normal input (USART2 RX). |
||||
* PA9 - Alternate output (USART1 TX). |
||||
* PA10 - Normal input (USART1 RX). |
||||
*/ |
||||
#define VAL_GPIOACRL 0x88884B88 /* PA7...PA0 */ |
||||
#define VAL_GPIOACRH 0x888884B8 /* PA15...PA8 */ |
||||
#define VAL_GPIOAODR 0xFFFFFFFF |
||||
|
||||
/*
|
||||
* Port B setup. |
||||
* Everything input with pull-up except: |
||||
* PB10 - Push Pull output (USB switch). |
||||
*/ |
||||
#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */ |
||||
#define VAL_GPIOBCRH 0x88888388 /* PB15...PB8 */ |
||||
#define VAL_GPIOBODR 0xFFFFFFFF |
||||
|
||||
/*
|
||||
* Port C setup. |
||||
* Everything input with pull-up except: |
||||
* PC13 - Push Pull output (LED). |
||||
*/ |
||||
#define VAL_GPIOCCRL 0x88888888 /* PC7...PC0 */ |
||||
#define VAL_GPIOCCRH 0x88388888 /* PC15...PC8 */ |
||||
#define VAL_GPIOCODR 0xFFFFFFFF |
||||
|
||||
/*
|
||||
* Port D setup. |
||||
* Everything input with pull-up except: |
||||
* PD0 - Normal input (XTAL). |
||||
* PD1 - Normal input (XTAL). |
||||
*/ |
||||
#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */ |
||||
#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */ |
||||
#define VAL_GPIODODR 0xFFFFFFFF |
||||
|
||||
/*
|
||||
* Port E setup. |
||||
* Everything input with pull-up except: |
||||
*/ |
||||
#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */ |
||||
#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */ |
||||
#define VAL_GPIOEODR 0xFFFFFFFF |
||||
|
||||
/*
|
||||
* USB bus activation macro, required by the USB driver. |
||||
*/ |
||||
/* The point is that most of the generic STM32F103* boards
|
||||
have a 1.5k resistor connected on one end to the D+ line |
||||
and on the other end to some pin. Or even a slightly more |
||||
complicated "USB enable" circuit, controlled by a pin. |
||||
That should go here. |
||||
|
||||
However on some boards (e.g. one that I have), there's no |
||||
such hardware. In which case it's better to not do anything. |
||||
*/ |
||||
/*
|
||||
#define usb_lld_connect_bus(usbp) palClearPad(GPIOB, GPIOB_USB_DISC) |
||||
*/ |
||||
#define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT); |
||||
|
||||
/*
|
||||
* USB bus de-activation macro, required by the USB driver. |
||||
*/ |
||||
/*
|
||||
#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOB, GPIOB_USB_DISC) |
||||
*/ |
||||
#define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12); |
||||
|
||||
#if !defined(_FROM_ASM_) |
||||
#ifdef __cplusplus |
||||
extern "C" { |
||||
#endif |
||||
void boardInit(void); |
||||
#ifdef __cplusplus |
||||
} |
||||
#endif |
||||
#endif /* _FROM_ASM_ */ |
||||
|
||||
#endif /* _BOARD_H_ */ |
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio |
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License"); |
||||
you may not use this file except in compliance with the License. |
||||
You may obtain a copy of the License at |
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software |
||||
distributed under the License is distributed on an "AS IS" BASIS, |
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
||||
See the License for the specific language governing permissions and |
||||
limitations under the License. |
||||
*/ |
||||
|
||||
#ifndef _BOARD_H_ |
||||
#define _BOARD_H_ |
||||
|
||||
/*
|
||||
* Setup for a Generic STM32F103 board. |
||||
*/ |
||||
|
||||
/*
|
||||
* Board identifier. |
||||
*/ |
||||
#define BOARD_GENERIC_STM32_F103 |
||||
#define BOARD_NAME "Generic STM32F103x board" |
||||
|
||||
/*
|
||||
* Board frequencies. |
||||
*/ |
||||
#define STM32_LSECLK 32768 |
||||
#define STM32_HSECLK 8000000 |
||||
|
||||
/*
|
||||
* MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h. |
||||
*/ |
||||
#define STM32F103xB |
||||
|
||||
/*
|
||||
* IO pins assignments |
||||
*/ |
||||
|
||||
/* on-board */ |
||||
|
||||
#define GPIOC_LED 13 |
||||
#define GPIOD_OSC_IN 0 |
||||
#define GPIOD_OSC_OUT 1 |
||||
|
||||
/* In case your board has a "USB enable" hardware
|
||||
controlled by a pin, define it here. (It could be just |
||||
a 1.5k resistor connected to D+ line.) |
||||
*/ |
||||
/*
|
||||
#define GPIOB_USB_DISC 10 |
||||
*/ |
||||
|
||||
/*
|
||||
* I/O ports initial setup, this configuration is established soon after reset |
||||
* in the initialization code. |
||||
* |
||||
* The digits have the following meaning: |
||||
* 0 - Analog input. |
||||
* 1 - Push Pull output 10MHz. |
||||
* 2 - Push Pull output 2MHz. |
||||
* 3 - Push Pull output 50MHz. |
||||
* 4 - Digital input. |
||||
* 5 - Open Drain output 10MHz. |
||||
* 6 - Open Drain output 2MHz. |
||||
* 7 - Open Drain output 50MHz. |
||||
* 8 - Digital input with PullUp or PullDown resistor depending on ODR. |
||||
* 9 - Alternate Push Pull output 10MHz. |
||||
* A - Alternate Push Pull output 2MHz. |
||||
* B - Alternate Push Pull output 50MHz. |
||||
* C - Reserved. |
||||
* D - Alternate Open Drain output 10MHz. |
||||
* E - Alternate Open Drain output 2MHz. |
||||
* F - Alternate Open Drain output 50MHz. |
||||
* Please refer to the STM32 Reference Manual for details. |
||||
*/ |
||||
|
||||
/*
|
||||
* Port A setup. |
||||
* Everything input with pull-up except: |
||||
* PA2 - Alternate output (USART2 TX). |
||||
* PA3 - Normal input (USART2 RX). |
||||
* PA9 - Alternate output (USART1 TX). |
||||
* PA10 - Normal input (USART1 RX). |
||||
*/ |
||||
#define VAL_GPIOACRL 0x88884B88 /* PA7...PA0 */ |
||||
#define VAL_GPIOACRH 0x888884B8 /* PA15...PA8 */ |
||||
#define VAL_GPIOAODR 0xFFFFFFFF |
||||
|
||||
/*
|
||||
* Port B setup. |
||||
* Everything input with pull-up except: |
||||
* PB10 - Push Pull output (USB switch). |
||||
*/ |
||||
#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */ |
||||
#define VAL_GPIOBCRH 0x88888388 /* PB15...PB8 */ |
||||
#define VAL_GPIOBODR 0xFFFFFFFF |
||||
|
||||
/*
|
||||
* Port C setup. |
||||
* Everything input with pull-up except: |
||||
* PC13 - Push Pull output (LED). |
||||
*/ |
||||
#define VAL_GPIOCCRL 0x88888888 /* PC7...PC0 */ |
||||
#define VAL_GPIOCCRH 0x88388888 /* PC15...PC8 */ |
||||
#define VAL_GPIOCODR 0xFFFFFFFF |
||||
|
||||
/*
|
||||
* Port D setup. |
||||
* Everything input with pull-up except: |
||||
* PD0 - Normal input (XTAL). |
||||
* PD1 - Normal input (XTAL). |
||||
*/ |
||||
#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */ |
||||
#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */ |
||||
#define VAL_GPIODODR 0xFFFFFFFF |
||||
|
||||
/*
|
||||
* Port E setup. |
||||
* Everything input with pull-up except: |
||||
*/ |
||||
#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */ |
||||
#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */ |
||||
#define VAL_GPIOEODR 0xFFFFFFFF |
||||
|
||||
/*
|
||||
* USB bus activation macro, required by the USB driver. |
||||
*/ |
||||
/* The point is that most of the generic STM32F103* boards
|
||||
have a 1.5k resistor connected on one end to the D+ line |
||||
and on the other end to some pin. Or even a slightly more |
||||
complicated "USB enable" circuit, controlled by a pin. |
||||
That should go here. |
||||
|
||||
However on some boards (e.g. one that I have), there's no |
||||
such hardware. In which case it's better to not do anything. |
||||
*/ |
||||
/*
|
||||
#define usb_lld_connect_bus(usbp) palClearPad(GPIOB, GPIOB_USB_DISC) |
||||
*/ |
||||
#define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT); |
||||
|
||||
/*
|
||||
* USB bus de-activation macro, required by the USB driver. |
||||
*/ |
||||
/*
|
||||
#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOB, GPIOB_USB_DISC) |
||||
*/ |
||||
#define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12); |
||||
|
||||
#if !defined(_FROM_ASM_) |
||||
#ifdef __cplusplus |
||||
extern "C" { |
||||
#endif |
||||
void boardInit(void); |
||||
#ifdef __cplusplus |
||||
} |
||||
#endif |
||||
#endif /* _FROM_ASM_ */ |
||||
|
||||
#endif /* _BOARD_H_ */ |
||||
|
||||
@ -1,5 +1,5 @@ |
||||
# List of all the board related files.
|
||||
BOARDSRC = $(KEYBOARD_PATH)/boards/GENERIC_STM32_F103/board.c
|
||||
|
||||
# Required include directories
|
||||
BOARDINC = $(KEYBOARD_PATH)/boards/GENERIC_STM32_F103
|
||||
# List of all the board related files.
|
||||
BOARDSRC = $(KEYBOARD_PATH)/boards/GENERIC_STM32_F103/board.c
|
||||
|
||||
# Required include directories
|
||||
BOARDINC = $(KEYBOARD_PATH)/boards/GENERIC_STM32_F103
|
||||
|
||||
@ -1,105 +1,105 @@ |
||||
/* |
||||
* Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com |
||||
* (C) 2016 flabbergast <s3+flabbergast@sdfeu.org> |
||||
* |
||||
* Permission is hereby granted, free of charge, to any person obtaining |
||||
* a copy of this software and associated documentation files (the "Software"), |
||||
* to deal in the Software without restriction, including without limitation |
||||
* the rights to use, copy, modify, merge, publish, distribute, sublicense, |
||||
* and/or sell copies of the Software, and to permit persons to whom the |
||||
* Software is furnished to do so, subject to the following conditions: |
||||
* |
||||
* The above copyright notice and this permission notice shall be included in |
||||
* all copies or substantial portions of the Software. |
||||
* |
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS |
||||
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE |
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE |
||||
* SOFTWARE. |
||||
*/ |
||||
|
||||
/* |
||||
* KL26Z64 memory setup. |
||||
*/ |
||||
MEMORY |
||||
{ |
||||
flash0 : org = 0x00000000, len = 0x100 |
||||
flash1 : org = 0x00000400, len = 0x10 |
||||
flash2 : org = 0x00000410, len = 62k - 0x410 |
||||
flash3 : org = 0x0000F800, len = 2k |
||||
flash4 : org = 0x00000000, len = 0 |
||||
flash5 : org = 0x00000000, len = 0 |
||||
flash6 : org = 0x00000000, len = 0 |
||||
flash7 : org = 0x00000000, len = 0 |
||||
ram0 : org = 0x1FFFF800, len = 8k |
||||
ram1 : org = 0x00000000, len = 0 |
||||
ram2 : org = 0x00000000, len = 0 |
||||
ram3 : org = 0x00000000, len = 0 |
||||
ram4 : org = 0x00000000, len = 0 |
||||
ram5 : org = 0x00000000, len = 0 |
||||
ram6 : org = 0x00000000, len = 0 |
||||
ram7 : org = 0x00000000, len = 0 |
||||
} |
||||
|
||||
/* Flash region for the configuration bytes.*/ |
||||
SECTIONS |
||||
{ |
||||
.cfmprotect : ALIGN(4) SUBALIGN(4) |
||||
{ |
||||
KEEP(*(.cfmconfig)) |
||||
} > flash1 |
||||
} |
||||
|
||||
/* For each data/text section two region are defined, a virtual region |
||||
and a load region (_LMA suffix).*/ |
||||
|
||||
/* Flash region to be used for exception vectors.*/ |
||||
REGION_ALIAS("VECTORS_FLASH", flash0); |
||||
REGION_ALIAS("VECTORS_FLASH_LMA", flash0); |
||||
|
||||
/* Flash region to be used for constructors and destructors.*/ |
||||
REGION_ALIAS("XTORS_FLASH", flash2); |
||||
REGION_ALIAS("XTORS_FLASH_LMA", flash2); |
||||
|
||||
/* Flash region to be used for code text.*/ |
||||
REGION_ALIAS("TEXT_FLASH", flash2); |
||||
REGION_ALIAS("TEXT_FLASH_LMA", flash2); |
||||
|
||||
/* Flash region to be used for read only data.*/ |
||||
REGION_ALIAS("RODATA_FLASH", flash2); |
||||
REGION_ALIAS("RODATA_FLASH_LMA", flash2); |
||||
|
||||
/* Flash region to be used for various.*/ |
||||
REGION_ALIAS("VARIOUS_FLASH", flash2); |
||||
REGION_ALIAS("VARIOUS_FLASH_LMA", flash2); |
||||
|
||||
/* Flash region to be used for RAM(n) initialization data.*/ |
||||
REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2); |
||||
|
||||
/* RAM region to be used for Main stack. This stack accommodates the processing |
||||
of all exceptions and interrupts.*/ |
||||
REGION_ALIAS("MAIN_STACK_RAM", ram0); |
||||
|
||||
/* RAM region to be used for the process stack. This is the stack used by |
||||
the main() function.*/ |
||||
REGION_ALIAS("PROCESS_STACK_RAM", ram0); |
||||
|
||||
/* RAM region to be used for data segment.*/ |
||||
REGION_ALIAS("DATA_RAM", ram0); |
||||
REGION_ALIAS("DATA_RAM_LMA", flash2); |
||||
|
||||
/* RAM region to be used for BSS segment.*/ |
||||
REGION_ALIAS("BSS_RAM", ram0); |
||||
|
||||
/* RAM region to be used for the default heap.*/ |
||||
REGION_ALIAS("HEAP_RAM", ram0); |
||||
|
||||
__eeprom_workarea_start__ = ORIGIN(flash3); |
||||
__eeprom_workarea_size__ = LENGTH(flash3); |
||||
__eeprom_workarea_end__ = __eeprom_workarea_start__ + __eeprom_workarea_size__; |
||||
|
||||
/* Generic rules inclusion.*/ |
||||
INCLUDE rules.ld |
||||
/* |
||||
* Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com |
||||
* (C) 2016 flabbergast <s3+flabbergast@sdfeu.org> |
||||
* |
||||
* Permission is hereby granted, free of charge, to any person obtaining |
||||
* a copy of this software and associated documentation files (the "Software"), |
||||
* to deal in the Software without restriction, including without limitation |
||||
* the rights to use, copy, modify, merge, publish, distribute, sublicense, |
||||
* and/or sell copies of the Software, and to permit persons to whom the |
||||
* Software is furnished to do so, subject to the following conditions: |
||||
* |
||||
* The above copyright notice and this permission notice shall be included in |
||||
* all copies or substantial portions of the Software. |
||||
* |
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS |
||||
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
||||
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE |
||||
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
||||
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, |
||||
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE |
||||
* SOFTWARE. |
||||
*/ |
||||
|
||||
/* |
||||
* KL26Z64 memory setup. |
||||
*/ |
||||
MEMORY |
||||
{ |
||||
flash0 : org = 0x00000000, len = 0x100 |
||||
flash1 : org = 0x00000400, len = 0x10 |
||||
flash2 : org = 0x00000410, len = 62k - 0x410 |
||||
flash3 : org = 0x0000F800, len = 2k |
||||
flash4 : org = 0x00000000, len = 0 |
||||
flash5 : org = 0x00000000, len = 0 |
||||
flash6 : org = 0x00000000, len = 0 |
||||
flash7 : org = 0x00000000, len = 0 |
||||
ram0 : org = 0x1FFFF800, len = 8k |
||||
ram1 : org = 0x00000000, len = 0 |
||||
ram2 : org = 0x00000000, len = 0 |
||||
ram3 : org = 0x00000000, len = 0 |
||||
ram4 : org = 0x00000000, len = 0 |
||||
ram5 : org = 0x00000000, len = 0 |
||||
ram6 : org = 0x00000000, len = 0 |
||||
ram7 : org = 0x00000000, len = 0 |
||||
} |
||||
|
||||
/* Flash region for the configuration bytes.*/ |
||||
SECTIONS |
||||
{ |
||||
.cfmprotect : ALIGN(4) SUBALIGN(4) |
||||
{ |
||||
KEEP(*(.cfmconfig)) |
||||
} > flash1 |
||||
} |
||||
|
||||
/* For each data/text section two region are defined, a virtual region |
||||
and a load region (_LMA suffix).*/ |
||||
|
||||
/* Flash region to be used for exception vectors.*/ |
||||
REGION_ALIAS("VECTORS_FLASH", flash0); |
||||
REGION_ALIAS("VECTORS_FLASH_LMA", flash0); |
||||
|
||||
/* Flash region to be used for constructors and destructors.*/ |
||||
REGION_ALIAS("XTORS_FLASH", flash2); |
||||
REGION_ALIAS("XTORS_FLASH_LMA", flash2); |
||||
|
||||
/* Flash region to be used for code text.*/ |
||||
REGION_ALIAS("TEXT_FLASH", flash2); |
||||
REGION_ALIAS("TEXT_FLASH_LMA", flash2); |
||||
|
||||
/* Flash region to be used for read only data.*/ |
||||
REGION_ALIAS("RODATA_FLASH", flash2); |
||||
REGION_ALIAS("RODATA_FLASH_LMA", flash2); |
||||
|
||||
/* Flash region to be used for various.*/ |
||||
REGION_ALIAS("VARIOUS_FLASH", flash2); |
||||
REGION_ALIAS("VARIOUS_FLASH_LMA", flash2); |
||||
|
||||
/* Flash region to be used for RAM(n) initialization data.*/ |
||||
REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2); |
||||
|
||||
/* RAM region to be used for Main stack. This stack accommodates the processing |
||||
of all exceptions and interrupts.*/ |
||||
REGION_ALIAS("MAIN_STACK_RAM", ram0); |
||||
|
||||
/* RAM region to be used for the process stack. This is the stack used by |
||||
the main() function.*/ |
||||
REGION_ALIAS("PROCESS_STACK_RAM", ram0); |
||||
|
||||
/* RAM region to be used for data segment.*/ |
||||
REGION_ALIAS("DATA_RAM", ram0); |
||||
REGION_ALIAS("DATA_RAM_LMA", flash2); |
||||
|
||||
/* RAM region to be used for BSS segment.*/ |
||||
REGION_ALIAS("BSS_RAM", ram0); |
||||
|
||||
/* RAM region to be used for the default heap.*/ |
||||
REGION_ALIAS("HEAP_RAM", ram0); |
||||
|
||||
__eeprom_workarea_start__ = ORIGIN(flash3); |
||||
__eeprom_workarea_size__ = LENGTH(flash3); |
||||
__eeprom_workarea_end__ = __eeprom_workarea_start__ + __eeprom_workarea_size__; |
||||
|
||||
/* Generic rules inclusion.*/ |
||||
INCLUDE rules.ld |
||||
|
||||
@ -1,88 +1,88 @@ |
||||
/* |
||||
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio |
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License"); |
||||
you may not use this file except in compliance with the License. |
||||
You may obtain a copy of the License at |
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0 |
||||
|
||||
Unless required by applicable law or agreed to in writing, software |
||||
distributed under the License is distributed on an "AS IS" BASIS, |
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
||||
See the License for the specific language governing permissions and |
||||
limitations under the License. |
||||
*/ |
||||
|
||||
/* |
||||
* ST32F103xB memory setup for use with the maplemini bootloader. |
||||
* You will have to |
||||
* #define CORTEX_VTOR_INIT 0x5000 |
||||
* in your projects chconf.h |
||||
*/ |
||||
MEMORY |
||||
{ |
||||
flash0 : org = 0x08002000, len = 128k - 0x2000 |
||||
flash1 : org = 0x00000000, len = 0 |
||||
flash2 : org = 0x00000000, len = 0 |
||||
flash3 : org = 0x00000000, len = 0 |
||||
flash4 : org = 0x00000000, len = 0 |
||||
flash5 : org = 0x00000000, len = 0 |
||||
flash6 : org = 0x00000000, len = 0 |
||||
flash7 : org = 0x00000000, len = 0 |
||||
ram0 : org = 0x20000000, len = 20k |
||||
ram1 : org = 0x00000000, len = 0 |
||||
ram2 : org = 0x00000000, len = 0 |
||||
ram3 : org = 0x00000000, len = 0 |
||||
ram4 : org = 0x00000000, len = 0 |
||||
ram5 : org = 0x00000000, len = 0 |
||||
ram6 : org = 0x00000000, len = 0 |
||||
ram7 : org = 0x00000000, len = 0 |
||||
} |
||||
|
||||
/* For each data/text section two region are defined, a virtual region |
||||
and a load region (_LMA suffix).*/ |
||||
|
||||
/* Flash region to be used for exception vectors.*/ |
||||
REGION_ALIAS("VECTORS_FLASH", flash0); |
||||
REGION_ALIAS("VECTORS_FLASH_LMA", flash0); |
||||
|
||||
/* Flash region to be used for constructors and destructors.*/ |
||||
REGION_ALIAS("XTORS_FLASH", flash0); |
||||
REGION_ALIAS("XTORS_FLASH_LMA", flash0); |
||||
|
||||
/* Flash region to be used for code text.*/ |
||||
REGION_ALIAS("TEXT_FLASH", flash0); |
||||
REGION_ALIAS("TEXT_FLASH_LMA", flash0); |
||||
|
||||
/* Flash region to be used for read only data.*/ |
||||
REGION_ALIAS("RODATA_FLASH", flash0); |
||||
REGION_ALIAS("RODATA_FLASH_LMA", flash0); |
||||
|
||||
/* Flash region to be used for various.*/ |
||||
REGION_ALIAS("VARIOUS_FLASH", flash0); |
||||
REGION_ALIAS("VARIOUS_FLASH_LMA", flash0); |
||||
|
||||
/* Flash region to be used for RAM(n) initialization data.*/ |
||||
REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0); |
||||
|
||||
/* RAM region to be used for Main stack. This stack accommodates the processing |
||||
of all exceptions and interrupts.*/ |
||||
REGION_ALIAS("MAIN_STACK_RAM", ram0); |
||||
|
||||
/* RAM region to be used for the process stack. This is the stack used by |
||||
the main() function.*/ |
||||
REGION_ALIAS("PROCESS_STACK_RAM", ram0); |
||||
|
||||
/* RAM region to be used for data segment.*/ |
||||
REGION_ALIAS("DATA_RAM", ram0); |
||||
REGION_ALIAS("DATA_RAM_LMA", flash0); |
||||
|
||||
/* RAM region to be used for BSS segment.*/ |
||||
REGION_ALIAS("BSS_RAM", ram0); |
||||
|
||||
/* RAM region to be used for the default heap.*/ |
||||
REGION_ALIAS("HEAP_RAM", ram0); |
||||
|
||||
/* Generic rules inclusion.*/ |
||||
INCLUDE rules.ld |
||||
/* |
||||
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio |
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License"); |
||||
you may not use this file except in compliance with the License. |
||||
You may obtain a copy of the License at |
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0 |
||||
|
||||
Unless required by applicable law or agreed to in writing, software |
||||
distributed under the License is distributed on an "AS IS" BASIS, |
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
||||
See the License for the specific language governing permissions and |
||||
limitations under the License. |
||||
*/ |
||||
|
||||
/* |
||||
* ST32F103xB memory setup for use with the maplemini bootloader. |
||||
* You will have to |
||||
* #define CORTEX_VTOR_INIT 0x5000 |
||||
* in your projects chconf.h |
||||
*/ |
||||
MEMORY |
||||
{ |
||||
flash0 : org = 0x08002000, len = 128k - 0x2000 |
||||
flash1 : org = 0x00000000, len = 0 |
||||
flash2 : org = 0x00000000, len = 0 |
||||
flash3 : org = 0x00000000, len = 0 |
||||
flash4 : org = 0x00000000, len = 0 |
||||
flash5 : org = 0x00000000, len = 0 |
||||
flash6 : org = 0x00000000, len = 0 |
||||
flash7 : org = 0x00000000, len = 0 |
||||
ram0 : org = 0x20000000, len = 20k |
||||
ram1 : org = 0x00000000, len = 0 |
||||
ram2 : org = 0x00000000, len = 0 |
||||
ram3 : org = 0x00000000, len = 0 |
||||
ram4 : org = 0x00000000, len = 0 |
||||
ram5 : org = 0x00000000, len = 0 |
||||
ram6 : org = 0x00000000, len = 0 |
||||
ram7 : org = 0x00000000, len = 0 |
||||
} |
||||
|
||||
/* For each data/text section two region are defined, a virtual region |
||||
and a load region (_LMA suffix).*/ |
||||
|
||||
/* Flash region to be used for exception vectors.*/ |
||||
REGION_ALIAS("VECTORS_FLASH", flash0); |
||||
REGION_ALIAS("VECTORS_FLASH_LMA", flash0); |
||||
|
||||
/* Flash region to be used for constructors and destructors.*/ |
||||
REGION_ALIAS("XTORS_FLASH", flash0); |
||||
REGION_ALIAS("XTORS_FLASH_LMA", flash0); |
||||
|
||||
/* Flash region to be used for code text.*/ |
||||
REGION_ALIAS("TEXT_FLASH", flash0); |
||||
REGION_ALIAS("TEXT_FLASH_LMA", flash0); |
||||
|
||||
/* Flash region to be used for read only data.*/ |
||||
REGION_ALIAS("RODATA_FLASH", flash0); |
||||
REGION_ALIAS("RODATA_FLASH_LMA", flash0); |
||||
|
||||
/* Flash region to be used for various.*/ |
||||
REGION_ALIAS("VARIOUS_FLASH", flash0); |
||||
REGION_ALIAS("VARIOUS_FLASH_LMA", flash0); |
||||
|
||||
/* Flash region to be used for RAM(n) initialization data.*/ |
||||
REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0); |
||||
|
||||
/* RAM region to be used for Main stack. This stack accommodates the processing |
||||
of all exceptions and interrupts.*/ |
||||
REGION_ALIAS("MAIN_STACK_RAM", ram0); |
||||
|
||||
/* RAM region to be used for the process stack. This is the stack used by |
||||
the main() function.*/ |
||||
REGION_ALIAS("PROCESS_STACK_RAM", ram0); |
||||
|
||||
/* RAM region to be used for data segment.*/ |
||||
REGION_ALIAS("DATA_RAM", ram0); |
||||
REGION_ALIAS("DATA_RAM_LMA", flash0); |
||||
|
||||
/* RAM region to be used for BSS segment.*/ |
||||
REGION_ALIAS("BSS_RAM", ram0); |
||||
|
||||
/* RAM region to be used for the default heap.*/ |
||||
REGION_ALIAS("HEAP_RAM", ram0); |
||||
|
||||
/* Generic rules inclusion.*/ |
||||
INCLUDE rules.ld |
||||
|
||||
@ -0,0 +1,8 @@ |
||||
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control
|
||||
CONSOLE_ENABLE ?= yes # Console for debug
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover
|
||||
CUSTOM_MATRIX ?= yes # Custom matrix file
|
||||
@ -1,41 +1,3 @@ |
||||
# project specific files
|
||||
SRC = matrix.c \
|
||||
led.c
|
||||
|
||||
## chip/board settings
|
||||
# the next two should match the directories in
|
||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
||||
MCU_FAMILY = STM32
|
||||
MCU_SERIES = STM32F0xx
|
||||
# linker script to use
|
||||
# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
||||
# or <this_dir>/ld/
|
||||
MCU_LDSCRIPT = STM32F072xB
|
||||
# startup code to use
|
||||
# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
||||
MCU_STARTUP = stm32f0xx
|
||||
# it should exist either in <chibios>/os/hal/boards/
|
||||
# or <this_dir>/boards
|
||||
BOARD = ST_STM32F072B_DISCOVERY
|
||||
# Cortex version
|
||||
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
|
||||
MCU = cortex-m0
|
||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
||||
ARMV = 6
|
||||
# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
|
||||
# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
|
||||
# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
|
||||
# a custom board definition that you plan to reuse).
|
||||
# If you're not setting it here, leave it commented out.
|
||||
# It is chip dependent, the correct number can be looked up here (page 175):
|
||||
# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
|
||||
# This also requires a patch to chibios:
|
||||
# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
|
||||
#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
ifndef QUANTUM_DIR |
||||
ifndef MAKEFILE_INCLUDED |
||||
include ../../../Makefile
|
||||
endif |
||||
endif |
||||
@ -1,171 +1,171 @@ |
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio |
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License"); |
||||
you may not use this file except in compliance with the License. |
||||
You may obtain a copy of the License at |
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software |
||||
distributed under the License is distributed on an "AS IS" BASIS, |
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
||||
See the License for the specific language governing permissions and |
||||
limitations under the License. |
||||
*/ |
||||
|
||||
#ifndef _MCUCONF_H_ |
||||
#define _MCUCONF_H_ |
||||
|
||||
/*
|
||||
* STM32F0xx drivers configuration. |
||||
* The following settings override the default settings present in |
||||
* the various device driver implementation headers. |
||||
* Note that the settings for each driver only have effect if the whole |
||||
* driver is enabled in halconf.h. |
||||
* |
||||
* IRQ priorities: |
||||
* 3...0 Lowest...Highest. |
||||
* |
||||
* DMA priorities: |
||||
* 0...3 Lowest...Highest. |
||||
*/ |
||||
|
||||
#define STM32F0xx_MCUCONF |
||||
|
||||
/*
|
||||
* HAL driver system settings. |
||||
*/ |
||||
#define STM32_NO_INIT FALSE |
||||
#define STM32_PVD_ENABLE FALSE |
||||
#define STM32_PLS STM32_PLS_LEV0 |
||||
#define STM32_HSI_ENABLED TRUE |
||||
#define STM32_HSI14_ENABLED TRUE |
||||
#define STM32_HSI48_ENABLED FALSE |
||||
#define STM32_LSI_ENABLED TRUE |
||||
#define STM32_HSE_ENABLED FALSE |
||||
#define STM32_LSE_ENABLED FALSE |
||||
#define STM32_SW STM32_SW_PLL |
||||
#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 |
||||
#define STM32_PREDIV_VALUE 1 |
||||
#define STM32_PLLMUL_VALUE 12 |
||||
#define STM32_HPRE STM32_HPRE_DIV1 |
||||
#define STM32_PPRE STM32_PPRE_DIV1 |
||||
#define STM32_ADCSW STM32_ADCSW_HSI14 |
||||
#define STM32_ADCPRE STM32_ADCPRE_DIV4 |
||||
#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK |
||||
#define STM32_ADCPRE STM32_ADCPRE_DIV4 |
||||
#define STM32_ADCSW STM32_ADCSW_HSI14 |
||||
#define STM32_USBSW STM32_USBSW_HSI48 |
||||
#define STM32_CECSW STM32_CECSW_HSI |
||||
#define STM32_I2C1SW STM32_I2C1SW_HSI |
||||
#define STM32_USART1SW STM32_USART1SW_PCLK |
||||
#define STM32_RTCSEL STM32_RTCSEL_LSI |
||||
|
||||
/*
|
||||
* ADC driver system settings. |
||||
*/ |
||||
#define STM32_ADC_USE_ADC1 FALSE |
||||
#define STM32_ADC_ADC1_DMA_PRIORITY 2 |
||||
#define STM32_ADC_IRQ_PRIORITY 2 |
||||
#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 |
||||
|
||||
/*
|
||||
* EXT driver system settings. |
||||
*/ |
||||
#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 |
||||
#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 |
||||
#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 |
||||
#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 |
||||
#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 |
||||
|
||||
/*
|
||||
* GPT driver system settings. |
||||
*/ |
||||
#define STM32_GPT_USE_TIM1 FALSE |
||||
#define STM32_GPT_USE_TIM2 FALSE |
||||
#define STM32_GPT_USE_TIM3 FALSE |
||||
#define STM32_GPT_USE_TIM14 FALSE |
||||
#define STM32_GPT_TIM1_IRQ_PRIORITY 2 |
||||
#define STM32_GPT_TIM2_IRQ_PRIORITY 2 |
||||
#define STM32_GPT_TIM3_IRQ_PRIORITY 2 |
||||
#define STM32_GPT_TIM14_IRQ_PRIORITY 2 |
||||
|
||||
/*
|
||||
* I2C driver system settings. |
||||
*/ |
||||
#define STM32_I2C_USE_I2C1 FALSE |
||||
#define STM32_I2C_USE_I2C2 FALSE |
||||
#define STM32_I2C_BUSY_TIMEOUT 50 |
||||
#define STM32_I2C_I2C1_IRQ_PRIORITY 3 |
||||
#define STM32_I2C_I2C2_IRQ_PRIORITY 3 |
||||
#define STM32_I2C_USE_DMA TRUE |
||||
#define STM32_I2C_I2C1_DMA_PRIORITY 1 |
||||
#define STM32_I2C_I2C2_DMA_PRIORITY 1 |
||||
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") |
||||
|
||||
/*
|
||||
* ICU driver system settings. |
||||
*/ |
||||
#define STM32_ICU_USE_TIM1 FALSE |
||||
#define STM32_ICU_USE_TIM2 FALSE |
||||
#define STM32_ICU_USE_TIM3 FALSE |
||||
#define STM32_ICU_TIM1_IRQ_PRIORITY 3 |
||||
#define STM32_ICU_TIM2_IRQ_PRIORITY 3 |
||||
#define STM32_ICU_TIM3_IRQ_PRIORITY 3 |
||||
|
||||
/*
|
||||
* PWM driver system settings. |
||||
*/ |
||||
#define STM32_PWM_USE_ADVANCED FALSE |
||||
#define STM32_PWM_USE_TIM1 FALSE |
||||
#define STM32_PWM_USE_TIM2 FALSE |
||||
#define STM32_PWM_USE_TIM3 FALSE |
||||
#define STM32_PWM_TIM1_IRQ_PRIORITY 3 |
||||
#define STM32_PWM_TIM2_IRQ_PRIORITY 3 |
||||
#define STM32_PWM_TIM3_IRQ_PRIORITY 3 |
||||
|
||||
/*
|
||||
* SERIAL driver system settings. |
||||
*/ |
||||
#define STM32_SERIAL_USE_USART1 FALSE |
||||
#define STM32_SERIAL_USE_USART2 FALSE |
||||
#define STM32_SERIAL_USART1_PRIORITY 3 |
||||
#define STM32_SERIAL_USART2_PRIORITY 3 |
||||
|
||||
/*
|
||||
* SPI driver system settings. |
||||
*/ |
||||
#define STM32_SPI_USE_SPI1 FALSE |
||||
#define STM32_SPI_USE_SPI2 FALSE |
||||
#define STM32_SPI_SPI1_DMA_PRIORITY 1 |
||||
#define STM32_SPI_SPI2_DMA_PRIORITY 1 |
||||
#define STM32_SPI_SPI1_IRQ_PRIORITY 2 |
||||
#define STM32_SPI_SPI2_IRQ_PRIORITY 2 |
||||
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") |
||||
|
||||
/*
|
||||
* ST driver system settings. |
||||
*/ |
||||
#define STM32_ST_IRQ_PRIORITY 2 |
||||
#define STM32_ST_USE_TIMER 2 |
||||
|
||||
/*
|
||||
* UART driver system settings. |
||||
*/ |
||||
#define STM32_UART_USE_USART1 FALSE |
||||
#define STM32_UART_USE_USART2 FALSE |
||||
#define STM32_UART_USART1_IRQ_PRIORITY 3 |
||||
#define STM32_UART_USART2_IRQ_PRIORITY 3 |
||||
#define STM32_UART_USART1_DMA_PRIORITY 0 |
||||
#define STM32_UART_USART2_DMA_PRIORITY 0 |
||||
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") |
||||
|
||||
/*
|
||||
* USB driver system settings. |
||||
*/ |
||||
#define STM32_USB_USE_USB1 TRUE |
||||
#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE |
||||
#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 |
||||
|
||||
#endif /* _MCUCONF_H_ */ |
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio |
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License"); |
||||
you may not use this file except in compliance with the License. |
||||
You may obtain a copy of the License at |
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software |
||||
distributed under the License is distributed on an "AS IS" BASIS, |
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
||||
See the License for the specific language governing permissions and |
||||
limitations under the License. |
||||
*/ |
||||
|
||||
#ifndef _MCUCONF_H_ |
||||
#define _MCUCONF_H_ |
||||
|
||||
/*
|
||||
* STM32F0xx drivers configuration. |
||||
* The following settings override the default settings present in |
||||
* the various device driver implementation headers. |
||||
* Note that the settings for each driver only have effect if the whole |
||||
* driver is enabled in halconf.h. |
||||
* |
||||
* IRQ priorities: |
||||
* 3...0 Lowest...Highest. |
||||
* |
||||
* DMA priorities: |
||||
* 0...3 Lowest...Highest. |
||||
*/ |
||||
|
||||
#define STM32F0xx_MCUCONF |
||||
|
||||
/*
|
||||
* HAL driver system settings. |
||||
*/ |
||||
#define STM32_NO_INIT FALSE |
||||
#define STM32_PVD_ENABLE FALSE |
||||
#define STM32_PLS STM32_PLS_LEV0 |
||||
#define STM32_HSI_ENABLED TRUE |
||||
#define STM32_HSI14_ENABLED TRUE |
||||
#define STM32_HSI48_ENABLED FALSE |
||||
#define STM32_LSI_ENABLED TRUE |
||||
#define STM32_HSE_ENABLED FALSE |
||||
#define STM32_LSE_ENABLED FALSE |
||||
#define STM32_SW STM32_SW_PLL |
||||
#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 |
||||
#define STM32_PREDIV_VALUE 1 |
||||
#define STM32_PLLMUL_VALUE 12 |
||||
#define STM32_HPRE STM32_HPRE_DIV1 |
||||
#define STM32_PPRE STM32_PPRE_DIV1 |
||||
#define STM32_ADCSW STM32_ADCSW_HSI14 |
||||
#define STM32_ADCPRE STM32_ADCPRE_DIV4 |
||||
#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK |
||||
#define STM32_ADCPRE STM32_ADCPRE_DIV4 |
||||
#define STM32_ADCSW STM32_ADCSW_HSI14 |
||||
#define STM32_USBSW STM32_USBSW_HSI48 |
||||
#define STM32_CECSW STM32_CECSW_HSI |
||||
#define STM32_I2C1SW STM32_I2C1SW_HSI |
||||
#define STM32_USART1SW STM32_USART1SW_PCLK |
||||
#define STM32_RTCSEL STM32_RTCSEL_LSI |
||||
|
||||
/*
|
||||
* ADC driver system settings. |
||||
*/ |
||||
#define STM32_ADC_USE_ADC1 FALSE |
||||
#define STM32_ADC_ADC1_DMA_PRIORITY 2 |
||||
#define STM32_ADC_IRQ_PRIORITY 2 |
||||
#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 |
||||
|
||||
/*
|
||||
* EXT driver system settings. |
||||
*/ |
||||
#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 |
||||
#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 |
||||
#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 |
||||
#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 |
||||
#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 |
||||
|
||||
/*
|
||||
* GPT driver system settings. |
||||
*/ |
||||
#define STM32_GPT_USE_TIM1 FALSE |
||||
#define STM32_GPT_USE_TIM2 FALSE |
||||
#define STM32_GPT_USE_TIM3 FALSE |
||||
#define STM32_GPT_USE_TIM14 FALSE |
||||
#define STM32_GPT_TIM1_IRQ_PRIORITY 2 |
||||
#define STM32_GPT_TIM2_IRQ_PRIORITY 2 |
||||
#define STM32_GPT_TIM3_IRQ_PRIORITY 2 |
||||
#define STM32_GPT_TIM14_IRQ_PRIORITY 2 |
||||
|
||||
/*
|
||||
* I2C driver system settings. |
||||
*/ |
||||
#define STM32_I2C_USE_I2C1 FALSE |
||||
#define STM32_I2C_USE_I2C2 FALSE |
||||
#define STM32_I2C_BUSY_TIMEOUT 50 |
||||
#define STM32_I2C_I2C1_IRQ_PRIORITY 3 |
||||
#define STM32_I2C_I2C2_IRQ_PRIORITY 3 |
||||
#define STM32_I2C_USE_DMA TRUE |
||||
#define STM32_I2C_I2C1_DMA_PRIORITY 1 |
||||
#define STM32_I2C_I2C2_DMA_PRIORITY 1 |
||||
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") |
||||
|
||||
/*
|
||||
* ICU driver system settings. |
||||
*/ |
||||
#define STM32_ICU_USE_TIM1 FALSE |
||||
#define STM32_ICU_USE_TIM2 FALSE |
||||
#define STM32_ICU_USE_TIM3 FALSE |
||||
#define STM32_ICU_TIM1_IRQ_PRIORITY 3 |
||||
#define STM32_ICU_TIM2_IRQ_PRIORITY 3 |
||||
#define STM32_ICU_TIM3_IRQ_PRIORITY 3 |
||||
|
||||
/*
|
||||
* PWM driver system settings. |
||||
*/ |
||||
#define STM32_PWM_USE_ADVANCED FALSE |
||||
#define STM32_PWM_USE_TIM1 FALSE |
||||
#define STM32_PWM_USE_TIM2 FALSE |
||||
#define STM32_PWM_USE_TIM3 FALSE |
||||
#define STM32_PWM_TIM1_IRQ_PRIORITY 3 |
||||
#define STM32_PWM_TIM2_IRQ_PRIORITY 3 |
||||
#define STM32_PWM_TIM3_IRQ_PRIORITY 3 |
||||
|
||||
/*
|
||||
* SERIAL driver system settings. |
||||
*/ |
||||
#define STM32_SERIAL_USE_USART1 FALSE |
||||
#define STM32_SERIAL_USE_USART2 FALSE |
||||
#define STM32_SERIAL_USART1_PRIORITY 3 |
||||
#define STM32_SERIAL_USART2_PRIORITY 3 |
||||
|
||||
/*
|
||||
* SPI driver system settings. |
||||
*/ |
||||
#define STM32_SPI_USE_SPI1 FALSE |
||||
#define STM32_SPI_USE_SPI2 FALSE |
||||
#define STM32_SPI_SPI1_DMA_PRIORITY 1 |
||||
#define STM32_SPI_SPI2_DMA_PRIORITY 1 |
||||
#define STM32_SPI_SPI1_IRQ_PRIORITY 2 |
||||
#define STM32_SPI_SPI2_IRQ_PRIORITY 2 |
||||
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") |
||||
|
||||
/*
|
||||
* ST driver system settings. |
||||
*/ |
||||
#define STM32_ST_IRQ_PRIORITY 2 |
||||
#define STM32_ST_USE_TIMER 2 |
||||
|
||||
/*
|
||||
* UART driver system settings. |
||||
*/ |
||||
#define STM32_UART_USE_USART1 FALSE |
||||
#define STM32_UART_USE_USART2 FALSE |
||||
#define STM32_UART_USART1_IRQ_PRIORITY 3 |
||||
#define STM32_UART_USART2_IRQ_PRIORITY 3 |
||||
#define STM32_UART_USART1_DMA_PRIORITY 0 |
||||
#define STM32_UART_USART2_DMA_PRIORITY 0 |
||||
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") |
||||
|
||||
/*
|
||||
* USB driver system settings. |
||||
*/ |
||||
#define STM32_USB_USE_USB1 TRUE |
||||
#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE |
||||
#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 |
||||
|
||||
#endif /* _MCUCONF_H_ */ |
||||
|
||||
@ -0,0 +1,41 @@ |
||||
# project specific files
|
||||
SRC = matrix.c \
|
||||
led.c
|
||||
|
||||
## chip/board settings
|
||||
# the next two should match the directories in
|
||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
||||
MCU_FAMILY = STM32
|
||||
MCU_SERIES = STM32F0xx
|
||||
# linker script to use
|
||||
# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
||||
# or <this_dir>/ld/
|
||||
MCU_LDSCRIPT = STM32F072xB
|
||||
# startup code to use
|
||||
# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
||||
MCU_STARTUP = stm32f0xx
|
||||
# it should exist either in <chibios>/os/hal/boards/
|
||||
# or <this_dir>/boards
|
||||
BOARD = ST_STM32F072B_DISCOVERY
|
||||
# Cortex version
|
||||
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
|
||||
MCU = cortex-m0
|
||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
||||
ARMV = 6
|
||||
# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
|
||||
# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
|
||||
# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
|
||||
# a custom board definition that you plan to reuse).
|
||||
# If you're not setting it here, leave it commented out.
|
||||
# It is chip dependent, the correct number can be looked up here (page 175):
|
||||
# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
|
||||
# This also requires a patch to chibios:
|
||||
# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
|
||||
#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
ifndef QUANTUM_DIR |
||||
include ../../../Makefile
|
||||
endif |
||||
@ -1,52 +1,3 @@ |
||||
# project specific files
|
||||
SRC = matrix.c \
|
||||
led.c
|
||||
|
||||
# GENERIC STM32F103C8T6 board - stm32duino bootloader
|
||||
OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
|
||||
MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
|
||||
BOARD = GENERIC_STM32_F103
|
||||
|
||||
# GENERIC STM32F103C8T6 board - no bootloader (programmer over serial or SWD)
|
||||
# OPT_DEFS =
|
||||
# MCU_LDSCRIPT = STM32F103x8
|
||||
# BOARD = GENERIC_STM32_F103
|
||||
|
||||
# MAPLE MINI
|
||||
# OPT_DEFS = -DCORTEX_VTOR_INIT=0x5000
|
||||
# MCU_LDSCRIPT = STM32F103xB_maplemini_bootloader
|
||||
# BOARD = MAPLEMINI_STM32_F103
|
||||
|
||||
## chip/board settings
|
||||
# the next two should match the directories in
|
||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
||||
MCU_FAMILY = STM32
|
||||
MCU_SERIES = STM32F1xx
|
||||
# linker script to use
|
||||
# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
||||
# or <this_dir>/ld/
|
||||
# startup code to use
|
||||
# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
||||
MCU_STARTUP = stm32f1xx
|
||||
# it should exist either in <chibios>/os/hal/boards/
|
||||
# or <this_dir>/boards
|
||||
# Cortex version
|
||||
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
|
||||
MCU = cortex-m3
|
||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
||||
ARMV = 7
|
||||
# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
|
||||
# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
|
||||
# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
|
||||
# a custom board definition that you plan to reuse).
|
||||
# If you're not setting it here, leave it commented out.
|
||||
# It is chip dependent, the correct number can be looked up here (page 175):
|
||||
# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
|
||||
# This also requires a patch to chibios:
|
||||
# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
|
||||
#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
|
||||
|
||||
|
||||
ifndef QUANTUM_DIR |
||||
ifndef MAKEFILE_INCLUDED |
||||
include ../../../Makefile
|
||||
endif |
||||
endif |
||||
@ -1,209 +1,209 @@ |
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio |
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License"); |
||||
you may not use this file except in compliance with the License. |
||||
You may obtain a copy of the License at |
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software |
||||
distributed under the License is distributed on an "AS IS" BASIS, |
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
||||
See the License for the specific language governing permissions and |
||||
limitations under the License. |
||||
*/ |
||||
|
||||
#ifndef _MCUCONF_H_ |
||||
#define _MCUCONF_H_ |
||||
|
||||
#define STM32F103_MCUCONF |
||||
|
||||
/*
|
||||
* STM32F103 drivers configuration. |
||||
* The following settings override the default settings present in |
||||
* the various device driver implementation headers. |
||||
* Note that the settings for each driver only have effect if the whole |
||||
* driver is enabled in halconf.h. |
||||
* |
||||
* IRQ priorities: |
||||
* 15...0 Lowest...Highest. |
||||
* |
||||
* DMA priorities: |
||||
* 0...3 Lowest...Highest. |
||||
*/ |
||||
|
||||
/*
|
||||
* HAL driver system settings. |
||||
*/ |
||||
#define STM32_NO_INIT FALSE |
||||
#define STM32_HSI_ENABLED TRUE |
||||
#define STM32_LSI_ENABLED FALSE |
||||
#define STM32_HSE_ENABLED TRUE |
||||
#define STM32_LSE_ENABLED FALSE |
||||
#define STM32_SW STM32_SW_PLL |
||||
#define STM32_PLLSRC STM32_PLLSRC_HSE |
||||
#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 |
||||
#define STM32_PLLMUL_VALUE 9 |
||||
#define STM32_HPRE STM32_HPRE_DIV1 |
||||
#define STM32_PPRE1 STM32_PPRE1_DIV2 |
||||
#define STM32_PPRE2 STM32_PPRE2_DIV2 |
||||
#define STM32_ADCPRE STM32_ADCPRE_DIV4 |
||||
#define STM32_USB_CLOCK_REQUIRED TRUE |
||||
#define STM32_USBPRE STM32_USBPRE_DIV1P5 |
||||
#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK |
||||
#define STM32_RTCSEL STM32_RTCSEL_HSEDIV |
||||
#define STM32_PVD_ENABLE FALSE |
||||
#define STM32_PLS STM32_PLS_LEV0 |
||||
|
||||
/*
|
||||
* ADC driver system settings. |
||||
*/ |
||||
#define STM32_ADC_USE_ADC1 FALSE |
||||
#define STM32_ADC_ADC1_DMA_PRIORITY 2 |
||||
#define STM32_ADC_ADC1_IRQ_PRIORITY 6 |
||||
|
||||
/*
|
||||
* CAN driver system settings. |
||||
*/ |
||||
#define STM32_CAN_USE_CAN1 FALSE |
||||
#define STM32_CAN_CAN1_IRQ_PRIORITY 11 |
||||
|
||||
/*
|
||||
* EXT driver system settings. |
||||
*/ |
||||
#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 |
||||
#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 |
||||
#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 |
||||
#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 |
||||
#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 |
||||
#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 |
||||
#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 |
||||
#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 |
||||
#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 |
||||
#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 |
||||
#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 |
||||
|
||||
/*
|
||||
* GPT driver system settings. |
||||
*/ |
||||
#define STM32_GPT_USE_TIM1 FALSE |
||||
#define STM32_GPT_USE_TIM2 FALSE |
||||
#define STM32_GPT_USE_TIM3 FALSE |
||||
#define STM32_GPT_USE_TIM4 FALSE |
||||
#define STM32_GPT_USE_TIM5 FALSE |
||||
#define STM32_GPT_USE_TIM8 FALSE |
||||
#define STM32_GPT_TIM1_IRQ_PRIORITY 7 |
||||
#define STM32_GPT_TIM2_IRQ_PRIORITY 7 |
||||
#define STM32_GPT_TIM3_IRQ_PRIORITY 7 |
||||
#define STM32_GPT_TIM4_IRQ_PRIORITY 7 |
||||
#define STM32_GPT_TIM5_IRQ_PRIORITY 7 |
||||
#define STM32_GPT_TIM8_IRQ_PRIORITY 7 |
||||
|
||||
/*
|
||||
* I2C driver system settings. |
||||
*/ |
||||
#define STM32_I2C_USE_I2C1 FALSE |
||||
#define STM32_I2C_USE_I2C2 FALSE |
||||
#define STM32_I2C_BUSY_TIMEOUT 50 |
||||
#define STM32_I2C_I2C1_IRQ_PRIORITY 5 |
||||
#define STM32_I2C_I2C2_IRQ_PRIORITY 5 |
||||
#define STM32_I2C_I2C1_DMA_PRIORITY 3 |
||||
#define STM32_I2C_I2C2_DMA_PRIORITY 3 |
||||
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") |
||||
|
||||
/*
|
||||
* ICU driver system settings. |
||||
*/ |
||||
#define STM32_ICU_USE_TIM1 FALSE |
||||
#define STM32_ICU_USE_TIM2 FALSE |
||||
#define STM32_ICU_USE_TIM3 FALSE |
||||
#define STM32_ICU_USE_TIM4 FALSE |
||||
#define STM32_ICU_USE_TIM5 FALSE |
||||
#define STM32_ICU_USE_TIM8 FALSE |
||||
#define STM32_ICU_TIM1_IRQ_PRIORITY 7 |
||||
#define STM32_ICU_TIM2_IRQ_PRIORITY 7 |
||||
#define STM32_ICU_TIM3_IRQ_PRIORITY 7 |
||||
#define STM32_ICU_TIM4_IRQ_PRIORITY 7 |
||||
#define STM32_ICU_TIM5_IRQ_PRIORITY 7 |
||||
#define STM32_ICU_TIM8_IRQ_PRIORITY 7 |
||||
|
||||
/*
|
||||
* PWM driver system settings. |
||||
*/ |
||||
#define STM32_PWM_USE_ADVANCED FALSE |
||||
#define STM32_PWM_USE_TIM1 FALSE |
||||
#define STM32_PWM_USE_TIM2 FALSE |
||||
#define STM32_PWM_USE_TIM3 FALSE |
||||
#define STM32_PWM_USE_TIM4 FALSE |
||||
#define STM32_PWM_USE_TIM5 FALSE |
||||
#define STM32_PWM_USE_TIM8 FALSE |
||||
#define STM32_PWM_TIM1_IRQ_PRIORITY 7 |
||||
#define STM32_PWM_TIM2_IRQ_PRIORITY 7 |
||||
#define STM32_PWM_TIM3_IRQ_PRIORITY 7 |
||||
#define STM32_PWM_TIM4_IRQ_PRIORITY 7 |
||||
#define STM32_PWM_TIM5_IRQ_PRIORITY 7 |
||||
#define STM32_PWM_TIM8_IRQ_PRIORITY 7 |
||||
|
||||
/*
|
||||
* RTC driver system settings. |
||||
*/ |
||||
#define STM32_RTC_IRQ_PRIORITY 15 |
||||
|
||||
/*
|
||||
* SERIAL driver system settings. |
||||
*/ |
||||
#define STM32_SERIAL_USE_USART1 FALSE |
||||
#define STM32_SERIAL_USE_USART2 FALSE |
||||
#define STM32_SERIAL_USE_USART3 FALSE |
||||
#define STM32_SERIAL_USE_UART4 FALSE |
||||
#define STM32_SERIAL_USE_UART5 FALSE |
||||
#define STM32_SERIAL_USART1_PRIORITY 12 |
||||
#define STM32_SERIAL_USART2_PRIORITY 12 |
||||
#define STM32_SERIAL_USART3_PRIORITY 12 |
||||
#define STM32_SERIAL_UART4_PRIORITY 12 |
||||
#define STM32_SERIAL_UART5_PRIORITY 12 |
||||
|
||||
/*
|
||||
* SPI driver system settings. |
||||
*/ |
||||
#define STM32_SPI_USE_SPI1 FALSE |
||||
#define STM32_SPI_USE_SPI2 FALSE |
||||
#define STM32_SPI_USE_SPI3 FALSE |
||||
#define STM32_SPI_SPI1_DMA_PRIORITY 1 |
||||
#define STM32_SPI_SPI2_DMA_PRIORITY 1 |
||||
#define STM32_SPI_SPI3_DMA_PRIORITY 1 |
||||
#define STM32_SPI_SPI1_IRQ_PRIORITY 10 |
||||
#define STM32_SPI_SPI2_IRQ_PRIORITY 10 |
||||
#define STM32_SPI_SPI3_IRQ_PRIORITY 10 |
||||
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") |
||||
|
||||
/*
|
||||
* ST driver system settings. |
||||
*/ |
||||
#define STM32_ST_IRQ_PRIORITY 8 |
||||
#define STM32_ST_USE_TIMER 2 |
||||
|
||||
/*
|
||||
* UART driver system settings. |
||||
*/ |
||||
#define STM32_UART_USE_USART1 FALSE |
||||
#define STM32_UART_USE_USART2 FALSE |
||||
#define STM32_UART_USE_USART3 FALSE |
||||
#define STM32_UART_USART1_IRQ_PRIORITY 12 |
||||
#define STM32_UART_USART2_IRQ_PRIORITY 12 |
||||
#define STM32_UART_USART3_IRQ_PRIORITY 12 |
||||
#define STM32_UART_USART1_DMA_PRIORITY 0 |
||||
#define STM32_UART_USART2_DMA_PRIORITY 0 |
||||
#define STM32_UART_USART3_DMA_PRIORITY 0 |
||||
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") |
||||
|
||||
/*
|
||||
* USB driver system settings. |
||||
*/ |
||||
#define STM32_USB_USE_USB1 TRUE |
||||
#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE |
||||
#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 |
||||
#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 |
||||
|
||||
#endif /* _MCUCONF_H_ */ |
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio |
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License"); |
||||
you may not use this file except in compliance with the License. |
||||
You may obtain a copy of the License at |
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software |
||||
distributed under the License is distributed on an "AS IS" BASIS, |
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
||||
See the License for the specific language governing permissions and |
||||
limitations under the License. |
||||
*/ |
||||
|
||||
#ifndef _MCUCONF_H_ |
||||
#define _MCUCONF_H_ |
||||
|
||||
#define STM32F103_MCUCONF |
||||
|
||||
/*
|
||||
* STM32F103 drivers configuration. |
||||
* The following settings override the default settings present in |
||||
* the various device driver implementation headers. |
||||
* Note that the settings for each driver only have effect if the whole |
||||
* driver is enabled in halconf.h. |
||||
* |
||||
* IRQ priorities: |
||||
* 15...0 Lowest...Highest. |
||||
* |
||||
* DMA priorities: |
||||
* 0...3 Lowest...Highest. |
||||
*/ |
||||
|
||||
/*
|
||||
* HAL driver system settings. |
||||
*/ |
||||
#define STM32_NO_INIT FALSE |
||||
#define STM32_HSI_ENABLED TRUE |
||||
#define STM32_LSI_ENABLED FALSE |
||||
#define STM32_HSE_ENABLED TRUE |
||||
#define STM32_LSE_ENABLED FALSE |
||||
#define STM32_SW STM32_SW_PLL |
||||
#define STM32_PLLSRC STM32_PLLSRC_HSE |
||||
#define STM32_PLLXTPRE STM32_PLLXTPRE_DIV1 |
||||
#define STM32_PLLMUL_VALUE 9 |
||||
#define STM32_HPRE STM32_HPRE_DIV1 |
||||
#define STM32_PPRE1 STM32_PPRE1_DIV2 |
||||
#define STM32_PPRE2 STM32_PPRE2_DIV2 |
||||
#define STM32_ADCPRE STM32_ADCPRE_DIV4 |
||||
#define STM32_USB_CLOCK_REQUIRED TRUE |
||||
#define STM32_USBPRE STM32_USBPRE_DIV1P5 |
||||
#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK |
||||
#define STM32_RTCSEL STM32_RTCSEL_HSEDIV |
||||
#define STM32_PVD_ENABLE FALSE |
||||
#define STM32_PLS STM32_PLS_LEV0 |
||||
|
||||
/*
|
||||
* ADC driver system settings. |
||||
*/ |
||||
#define STM32_ADC_USE_ADC1 FALSE |
||||
#define STM32_ADC_ADC1_DMA_PRIORITY 2 |
||||
#define STM32_ADC_ADC1_IRQ_PRIORITY 6 |
||||
|
||||
/*
|
||||
* CAN driver system settings. |
||||
*/ |
||||
#define STM32_CAN_USE_CAN1 FALSE |
||||
#define STM32_CAN_CAN1_IRQ_PRIORITY 11 |
||||
|
||||
/*
|
||||
* EXT driver system settings. |
||||
*/ |
||||
#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 |
||||
#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 |
||||
#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 |
||||
#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 |
||||
#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 |
||||
#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 |
||||
#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 |
||||
#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 |
||||
#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 |
||||
#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 |
||||
#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 |
||||
|
||||
/*
|
||||
* GPT driver system settings. |
||||
*/ |
||||
#define STM32_GPT_USE_TIM1 FALSE |
||||
#define STM32_GPT_USE_TIM2 FALSE |
||||
#define STM32_GPT_USE_TIM3 FALSE |
||||
#define STM32_GPT_USE_TIM4 FALSE |
||||
#define STM32_GPT_USE_TIM5 FALSE |
||||
#define STM32_GPT_USE_TIM8 FALSE |
||||
#define STM32_GPT_TIM1_IRQ_PRIORITY 7 |
||||
#define STM32_GPT_TIM2_IRQ_PRIORITY 7 |
||||
#define STM32_GPT_TIM3_IRQ_PRIORITY 7 |
||||
#define STM32_GPT_TIM4_IRQ_PRIORITY 7 |
||||
#define STM32_GPT_TIM5_IRQ_PRIORITY 7 |
||||
#define STM32_GPT_TIM8_IRQ_PRIORITY 7 |
||||
|
||||
/*
|
||||
* I2C driver system settings. |
||||
*/ |
||||
#define STM32_I2C_USE_I2C1 FALSE |
||||
#define STM32_I2C_USE_I2C2 FALSE |
||||
#define STM32_I2C_BUSY_TIMEOUT 50 |
||||
#define STM32_I2C_I2C1_IRQ_PRIORITY 5 |
||||
#define STM32_I2C_I2C2_IRQ_PRIORITY 5 |
||||
#define STM32_I2C_I2C1_DMA_PRIORITY 3 |
||||
#define STM32_I2C_I2C2_DMA_PRIORITY 3 |
||||
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") |
||||
|
||||
/*
|
||||
* ICU driver system settings. |
||||
*/ |
||||
#define STM32_ICU_USE_TIM1 FALSE |
||||
#define STM32_ICU_USE_TIM2 FALSE |
||||
#define STM32_ICU_USE_TIM3 FALSE |
||||
#define STM32_ICU_USE_TIM4 FALSE |
||||
#define STM32_ICU_USE_TIM5 FALSE |
||||
#define STM32_ICU_USE_TIM8 FALSE |
||||
#define STM32_ICU_TIM1_IRQ_PRIORITY 7 |
||||
#define STM32_ICU_TIM2_IRQ_PRIORITY 7 |
||||
#define STM32_ICU_TIM3_IRQ_PRIORITY 7 |
||||
#define STM32_ICU_TIM4_IRQ_PRIORITY 7 |
||||
#define STM32_ICU_TIM5_IRQ_PRIORITY 7 |
||||
#define STM32_ICU_TIM8_IRQ_PRIORITY 7 |
||||
|
||||
/*
|
||||
* PWM driver system settings. |
||||
*/ |
||||
#define STM32_PWM_USE_ADVANCED FALSE |
||||
#define STM32_PWM_USE_TIM1 FALSE |
||||
#define STM32_PWM_USE_TIM2 FALSE |
||||
#define STM32_PWM_USE_TIM3 FALSE |
||||
#define STM32_PWM_USE_TIM4 FALSE |
||||
#define STM32_PWM_USE_TIM5 FALSE |
||||
#define STM32_PWM_USE_TIM8 FALSE |
||||
#define STM32_PWM_TIM1_IRQ_PRIORITY 7 |
||||
#define STM32_PWM_TIM2_IRQ_PRIORITY 7 |
||||
#define STM32_PWM_TIM3_IRQ_PRIORITY 7 |
||||
#define STM32_PWM_TIM4_IRQ_PRIORITY 7 |
||||
#define STM32_PWM_TIM5_IRQ_PRIORITY 7 |
||||
#define STM32_PWM_TIM8_IRQ_PRIORITY 7 |
||||
|
||||
/*
|
||||
* RTC driver system settings. |
||||
*/ |
||||
#define STM32_RTC_IRQ_PRIORITY 15 |
||||
|
||||
/*
|
||||
* SERIAL driver system settings. |
||||
*/ |
||||
#define STM32_SERIAL_USE_USART1 FALSE |
||||
#define STM32_SERIAL_USE_USART2 FALSE |
||||
#define STM32_SERIAL_USE_USART3 FALSE |
||||
#define STM32_SERIAL_USE_UART4 FALSE |
||||
#define STM32_SERIAL_USE_UART5 FALSE |
||||
#define STM32_SERIAL_USART1_PRIORITY 12 |
||||
#define STM32_SERIAL_USART2_PRIORITY 12 |
||||
#define STM32_SERIAL_USART3_PRIORITY 12 |
||||
#define STM32_SERIAL_UART4_PRIORITY 12 |
||||
#define STM32_SERIAL_UART5_PRIORITY 12 |
||||
|
||||
/*
|
||||
* SPI driver system settings. |
||||
*/ |
||||
#define STM32_SPI_USE_SPI1 FALSE |
||||
#define STM32_SPI_USE_SPI2 FALSE |
||||
#define STM32_SPI_USE_SPI3 FALSE |
||||
#define STM32_SPI_SPI1_DMA_PRIORITY 1 |
||||
#define STM32_SPI_SPI2_DMA_PRIORITY 1 |
||||
#define STM32_SPI_SPI3_DMA_PRIORITY 1 |
||||
#define STM32_SPI_SPI1_IRQ_PRIORITY 10 |
||||
#define STM32_SPI_SPI2_IRQ_PRIORITY 10 |
||||
#define STM32_SPI_SPI3_IRQ_PRIORITY 10 |
||||
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") |
||||
|
||||
/*
|
||||
* ST driver system settings. |
||||
*/ |
||||
#define STM32_ST_IRQ_PRIORITY 8 |
||||
#define STM32_ST_USE_TIMER 2 |
||||
|
||||
/*
|
||||
* UART driver system settings. |
||||
*/ |
||||
#define STM32_UART_USE_USART1 FALSE |
||||
#define STM32_UART_USE_USART2 FALSE |
||||
#define STM32_UART_USE_USART3 FALSE |
||||
#define STM32_UART_USART1_IRQ_PRIORITY 12 |
||||
#define STM32_UART_USART2_IRQ_PRIORITY 12 |
||||
#define STM32_UART_USART3_IRQ_PRIORITY 12 |
||||
#define STM32_UART_USART1_DMA_PRIORITY 0 |
||||
#define STM32_UART_USART2_DMA_PRIORITY 0 |
||||
#define STM32_UART_USART3_DMA_PRIORITY 0 |
||||
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") |
||||
|
||||
/*
|
||||
* USB driver system settings. |
||||
*/ |
||||
#define STM32_USB_USE_USB1 TRUE |
||||
#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE |
||||
#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 |
||||
#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 |
||||
|
||||
#endif /* _MCUCONF_H_ */ |
||||
|
||||
@ -0,0 +1,52 @@ |
||||
# project specific files
|
||||
SRC = matrix.c \
|
||||
led.c
|
||||
|
||||
# GENERIC STM32F103C8T6 board - stm32duino bootloader
|
||||
OPT_DEFS = -DCORTEX_VTOR_INIT=0x2000
|
||||
MCU_LDSCRIPT = STM32F103x8_stm32duino_bootloader
|
||||
BOARD = GENERIC_STM32_F103
|
||||
|
||||
# GENERIC STM32F103C8T6 board - no bootloader (programmer over serial or SWD)
|
||||
# OPT_DEFS =
|
||||
# MCU_LDSCRIPT = STM32F103x8
|
||||
# BOARD = GENERIC_STM32_F103
|
||||
|
||||
# MAPLE MINI
|
||||
# OPT_DEFS = -DCORTEX_VTOR_INIT=0x5000
|
||||
# MCU_LDSCRIPT = STM32F103xB_maplemini_bootloader
|
||||
# BOARD = MAPLEMINI_STM32_F103
|
||||
|
||||
## chip/board settings
|
||||
# the next two should match the directories in
|
||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
||||
MCU_FAMILY = STM32
|
||||
MCU_SERIES = STM32F1xx
|
||||
# linker script to use
|
||||
# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
||||
# or <this_dir>/ld/
|
||||
# startup code to use
|
||||
# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
||||
MCU_STARTUP = stm32f1xx
|
||||
# it should exist either in <chibios>/os/hal/boards/
|
||||
# or <this_dir>/boards
|
||||
# Cortex version
|
||||
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
|
||||
MCU = cortex-m3
|
||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
||||
ARMV = 7
|
||||
# If you want to be able to jump to bootloader from firmware on STM32 MCUs,
|
||||
# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in
|
||||
# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have
|
||||
# a custom board definition that you plan to reuse).
|
||||
# If you're not setting it here, leave it commented out.
|
||||
# It is chip dependent, the correct number can be looked up here (page 175):
|
||||
# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
|
||||
# This also requires a patch to chibios:
|
||||
# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
|
||||
#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800
|
||||
|
||||
|
||||
ifndef QUANTUM_DIR |
||||
include ../../../Makefile
|
||||
endif |
||||
@ -1,49 +1,3 @@ |
||||
# project specific files
|
||||
SRC = matrix.c \
|
||||
led.c
|
||||
|
||||
## chip/board settings
|
||||
# - the next two should match the directories in
|
||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
||||
# - For Teensies, FAMILY = KINETIS and SERIES is either
|
||||
# KL2x (LC) or K20x (3.0,3.1,3.2).
|
||||
MCU_FAMILY = KINETIS
|
||||
MCU_SERIES = KL2x
|
||||
|
||||
# Linker script to use
|
||||
# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
||||
# or <this_dir>/ld/
|
||||
# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
|
||||
# - LDSCRIPT =
|
||||
# - MKL26Z64 for Teensy LC
|
||||
# - MK20DX128 for Teensy 3.0
|
||||
# - MK20DX256 for Teensy 3.1 and 3.2
|
||||
MCU_LDSCRIPT = MKL26Z64
|
||||
|
||||
# Startup code to use
|
||||
# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
||||
# - STARTUP =
|
||||
# - kl2x for Teensy LC
|
||||
# - k20x5 for Teensy 3.0
|
||||
# - k20x7 for Teensy 3.1 and 3.2
|
||||
MCU_STARTUP = kl2x
|
||||
|
||||
# Board: it should exist either in <chibios>/os/hal/boards/
|
||||
# or <this_dir>/boards
|
||||
# - BOARD =
|
||||
# - PJRC_TEENSY_LC for Teensy LC
|
||||
# - PJRC_TEENSY_3 for Teensy 3.0
|
||||
# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
|
||||
BOARD = PJRC_TEENSY_LC
|
||||
|
||||
# Cortex version
|
||||
# Teensy LC is cortex-m0plus; Teensy 3.x are cortex-m4
|
||||
MCU = cortex-m0plus
|
||||
|
||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
||||
# I.e. 6 for Teensy LC; 7 for Teensy 3.x
|
||||
ARMV = 6
|
||||
|
||||
ifndef QUANTUM_DIR |
||||
ifndef MAKEFILE_INCLUDED |
||||
include ../../../Makefile
|
||||
endif |
||||
File diff suppressed because it is too large
Load Diff
@ -1,187 +1,187 @@ |
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio |
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License"); |
||||
you may not use this file except in compliance with the License. |
||||
You may obtain a copy of the License at |
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software |
||||
distributed under the License is distributed on an "AS IS" BASIS, |
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
||||
See the License for the specific language governing permissions and |
||||
limitations under the License. |
||||
*/ |
||||
|
||||
/**
|
||||
* @file templates/halconf.h |
||||
* @brief HAL configuration header. |
||||
* @details HAL configuration file, this file allows to enable or disable the |
||||
* various device drivers from your application. You may also use |
||||
* this file in order to override the device drivers default settings. |
||||
* |
||||
* @addtogroup HAL_CONF |
||||
* @{ |
||||
*/ |
||||
|
||||
#ifndef _HALCONF_H_ |
||||
#define _HALCONF_H_ |
||||
|
||||
#include "mcuconf.h" |
||||
|
||||
/**
|
||||
* @brief Enables the PAL subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) |
||||
#define HAL_USE_PAL TRUE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the ADC subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) |
||||
#define HAL_USE_ADC FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the CAN subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) |
||||
#define HAL_USE_CAN FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the DAC subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) |
||||
#define HAL_USE_DAC FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the EXT subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) |
||||
#define HAL_USE_EXT FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the GPT subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) |
||||
#define HAL_USE_GPT FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the I2C subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) |
||||
#define HAL_USE_I2C FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the I2S subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) |
||||
#define HAL_USE_I2S FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the ICU subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) |
||||
#define HAL_USE_ICU FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the MAC subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) |
||||
#define HAL_USE_MAC FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the MMC_SPI subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) |
||||
#define HAL_USE_MMC_SPI FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the PWM subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) |
||||
#define HAL_USE_PWM FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the RTC subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) |
||||
#define HAL_USE_RTC FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the SDC subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) |
||||
#define HAL_USE_SDC FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the SERIAL subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) |
||||
#define HAL_USE_SERIAL FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the SERIAL over USB subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) |
||||
#define HAL_USE_SERIAL_USB FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the SPI subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) |
||||
#define HAL_USE_SPI FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the UART subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) |
||||
#define HAL_USE_UART FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the USB subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) |
||||
#define HAL_USE_USB TRUE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the WDG subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) |
||||
#define HAL_USE_WDG FALSE |
||||
#endif |
||||
|
||||
/*===========================================================================*/ |
||||
/* USB driver related settings. */ |
||||
/*===========================================================================*/ |
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs. |
||||
* @note Disabling this option saves both code and data space. |
||||
*/ |
||||
#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) |
||||
#define USB_USE_WAIT TRUE |
||||
#endif |
||||
|
||||
#endif /* _HALCONF_H_ */ |
||||
|
||||
/** @} */ |
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio |
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License"); |
||||
you may not use this file except in compliance with the License. |
||||
You may obtain a copy of the License at |
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software |
||||
distributed under the License is distributed on an "AS IS" BASIS, |
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
||||
See the License for the specific language governing permissions and |
||||
limitations under the License. |
||||
*/ |
||||
|
||||
/**
|
||||
* @file templates/halconf.h |
||||
* @brief HAL configuration header. |
||||
* @details HAL configuration file, this file allows to enable or disable the |
||||
* various device drivers from your application. You may also use |
||||
* this file in order to override the device drivers default settings. |
||||
* |
||||
* @addtogroup HAL_CONF |
||||
* @{ |
||||
*/ |
||||
|
||||
#ifndef _HALCONF_H_ |
||||
#define _HALCONF_H_ |
||||
|
||||
#include "mcuconf.h" |
||||
|
||||
/**
|
||||
* @brief Enables the PAL subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) |
||||
#define HAL_USE_PAL TRUE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the ADC subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) |
||||
#define HAL_USE_ADC FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the CAN subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) |
||||
#define HAL_USE_CAN FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the DAC subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) |
||||
#define HAL_USE_DAC FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the EXT subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) |
||||
#define HAL_USE_EXT FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the GPT subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) |
||||
#define HAL_USE_GPT FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the I2C subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) |
||||
#define HAL_USE_I2C FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the I2S subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) |
||||
#define HAL_USE_I2S FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the ICU subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) |
||||
#define HAL_USE_ICU FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the MAC subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) |
||||
#define HAL_USE_MAC FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the MMC_SPI subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) |
||||
#define HAL_USE_MMC_SPI FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the PWM subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) |
||||
#define HAL_USE_PWM FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the RTC subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) |
||||
#define HAL_USE_RTC FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the SDC subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) |
||||
#define HAL_USE_SDC FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the SERIAL subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) |
||||
#define HAL_USE_SERIAL FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the SERIAL over USB subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) |
||||
#define HAL_USE_SERIAL_USB FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the SPI subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) |
||||
#define HAL_USE_SPI FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the UART subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) |
||||
#define HAL_USE_UART FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the USB subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) |
||||
#define HAL_USE_USB TRUE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the WDG subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) |
||||
#define HAL_USE_WDG FALSE |
||||
#endif |
||||
|
||||
/*===========================================================================*/ |
||||
/* USB driver related settings. */ |
||||
/*===========================================================================*/ |
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs. |
||||
* @note Disabling this option saves both code and data space. |
||||
*/ |
||||
#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) |
||||
#define USB_USE_WAIT TRUE |
||||
#endif |
||||
|
||||
#endif /* _HALCONF_H_ */ |
||||
|
||||
/** @} */ |
||||
|
||||
@ -1,55 +1,55 @@ |
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio |
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License"); |
||||
you may not use this file except in compliance with the License. |
||||
You may obtain a copy of the License at |
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software |
||||
distributed under the License is distributed on an "AS IS" BASIS, |
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
||||
See the License for the specific language governing permissions and |
||||
limitations under the License. |
||||
*/ |
||||
|
||||
#ifndef _MCUCONF_H_ |
||||
#define _MCUCONF_H_ |
||||
|
||||
#define KL2x_MCUCONF |
||||
|
||||
/*
|
||||
* HAL driver system settings. |
||||
*/ |
||||
#if 1 |
||||
/* PEE mode - 48MHz system clock driven by (16 MHz) external crystal. */ |
||||
#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE |
||||
#define KINETIS_PLLCLK_FREQUENCY 96000000UL |
||||
#define KINETIS_SYSCLK_FREQUENCY 48000000UL |
||||
#endif |
||||
|
||||
#if 0 |
||||
/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */ |
||||
#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI |
||||
#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ |
||||
#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ |
||||
#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ |
||||
#define KINETIS_CLKDIV1_OUTDIV1 1 /* do not divide system clock */ |
||||
#endif |
||||
|
||||
/*
|
||||
* SERIAL driver system settings. |
||||
*/ |
||||
#define KINETIS_SERIAL_USE_UART0 TRUE |
||||
|
||||
/*
|
||||
* USB driver settings |
||||
*/ |
||||
#define KINETIS_USB_USE_USB0 TRUE |
||||
/* Need to redefine this, since the default is for K20x */ |
||||
/* This is for Teensy LC; you should comment it out (or change to 5)
|
||||
* for Teensy 3.x */ |
||||
#define KINETIS_USB_USB0_IRQ_PRIORITY 2 |
||||
|
||||
#endif /* _MCUCONF_H_ */ |
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio |
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License"); |
||||
you may not use this file except in compliance with the License. |
||||
You may obtain a copy of the License at |
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software |
||||
distributed under the License is distributed on an "AS IS" BASIS, |
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
||||
See the License for the specific language governing permissions and |
||||
limitations under the License. |
||||
*/ |
||||
|
||||
#ifndef _MCUCONF_H_ |
||||
#define _MCUCONF_H_ |
||||
|
||||
#define KL2x_MCUCONF |
||||
|
||||
/*
|
||||
* HAL driver system settings. |
||||
*/ |
||||
#if 1 |
||||
/* PEE mode - 48MHz system clock driven by (16 MHz) external crystal. */ |
||||
#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE |
||||
#define KINETIS_PLLCLK_FREQUENCY 96000000UL |
||||
#define KINETIS_SYSCLK_FREQUENCY 48000000UL |
||||
#endif |
||||
|
||||
#if 0 |
||||
/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */ |
||||
#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI |
||||
#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ |
||||
#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ |
||||
#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ |
||||
#define KINETIS_CLKDIV1_OUTDIV1 1 /* do not divide system clock */ |
||||
#endif |
||||
|
||||
/*
|
||||
* SERIAL driver system settings. |
||||
*/ |
||||
#define KINETIS_SERIAL_USE_UART0 TRUE |
||||
|
||||
/*
|
||||
* USB driver settings |
||||
*/ |
||||
#define KINETIS_USB_USE_USB0 TRUE |
||||
/* Need to redefine this, since the default is for K20x */ |
||||
/* This is for Teensy LC; you should comment it out (or change to 5)
|
||||
* for Teensy 3.x */ |
||||
#define KINETIS_USB_USB0_IRQ_PRIORITY 2 |
||||
|
||||
#endif /* _MCUCONF_H_ */ |
||||
|
||||
@ -0,0 +1,49 @@ |
||||
# project specific files
|
||||
SRC = matrix.c \
|
||||
led.c
|
||||
|
||||
## chip/board settings
|
||||
# - the next two should match the directories in
|
||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
||||
# - For Teensies, FAMILY = KINETIS and SERIES is either
|
||||
# KL2x (LC) or K20x (3.0,3.1,3.2).
|
||||
MCU_FAMILY = KINETIS
|
||||
MCU_SERIES = KL2x
|
||||
|
||||
# Linker script to use
|
||||
# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
||||
# or <this_dir>/ld/
|
||||
# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
|
||||
# - LDSCRIPT =
|
||||
# - MKL26Z64 for Teensy LC
|
||||
# - MK20DX128 for Teensy 3.0
|
||||
# - MK20DX256 for Teensy 3.1 and 3.2
|
||||
MCU_LDSCRIPT = MKL26Z64
|
||||
|
||||
# Startup code to use
|
||||
# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
||||
# - STARTUP =
|
||||
# - kl2x for Teensy LC
|
||||
# - k20x5 for Teensy 3.0
|
||||
# - k20x7 for Teensy 3.1 and 3.2
|
||||
MCU_STARTUP = kl2x
|
||||
|
||||
# Board: it should exist either in <chibios>/os/hal/boards/
|
||||
# or <this_dir>/boards
|
||||
# - BOARD =
|
||||
# - PJRC_TEENSY_LC for Teensy LC
|
||||
# - PJRC_TEENSY_3 for Teensy 3.0
|
||||
# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
|
||||
BOARD = PJRC_TEENSY_LC
|
||||
|
||||
# Cortex version
|
||||
# Teensy LC is cortex-m0plus; Teensy 3.x are cortex-m4
|
||||
MCU = cortex-m0plus
|
||||
|
||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
||||
# I.e. 6 for Teensy LC; 7 for Teensy 3.x
|
||||
ARMV = 6
|
||||
|
||||
ifndef QUANTUM_DIR |
||||
include ../../../Makefile
|
||||
endif |
||||
@ -1,109 +1,5 @@ |
||||
#----------------------------------------------------------------------------
|
||||
# On command line:
|
||||
#
|
||||
# make all = Make software.
|
||||
#
|
||||
# make clean = Clean out built project files.
|
||||
#
|
||||
# make coff = Convert ELF to AVR COFF.
|
||||
#
|
||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
||||
#
|
||||
# make program = Download the hex file to the device.
|
||||
# Please customize your programmer settings(PROGRAM_CMD)
|
||||
#
|
||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
||||
# (must have teensy_loader_cli installed).
|
||||
#
|
||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
||||
# have dfu-programmer installed).
|
||||
#
|
||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
||||
# have Atmel FLIP installed).
|
||||
#
|
||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
||||
# (must have dfu-programmer installed).
|
||||
#
|
||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
||||
# (must have Atmel FLIP installed).
|
||||
#
|
||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
||||
# with avr-gdb or avr-insight as the front end for debugging.
|
||||
#
|
||||
# make filename.s = Just compile filename.c into the assembler code only.
|
||||
#
|
||||
# make filename.i = Create a preprocessed source file for use in submitting
|
||||
# bug reports to the GCC project.
|
||||
#
|
||||
# To rebuild project do "make clean" then "make all".
|
||||
#----------------------------------------------------------------------------
|
||||
|
||||
SUBPROJECT_DEFAULT = rev2
|
||||
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# change to no to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= no # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
AUDIO_ENABLE ?= no
|
||||
RGBLIGHT_ENABLE ?= no # Enable keyboard underlight functionality
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
|
||||
ifndef QUANTUM_DIR |
||||
ifndef MAKEFILE_INCLUDED |
||||
include ../../Makefile
|
||||
endif |
||||
endif |
||||
@ -1,5 +1,3 @@ |
||||
BACKLIGHT_ENABLE = no
|
||||
|
||||
ifndef QUANTUM_DIR |
||||
ifndef MAKEFILE_INCLUDED |
||||
include ../../../Makefile
|
||||
endif |
||||
endif |
||||
@ -0,0 +1,5 @@ |
||||
BACKLIGHT_ENABLE = no
|
||||
|
||||
ifndef QUANTUM_DIR |
||||
include ../../../Makefile
|
||||
endif |
||||
@ -1,5 +1,3 @@ |
||||
BACKLIGHT_ENABLE = yes
|
||||
|
||||
ifndef QUANTUM_DIR |
||||
ifndef MAKEFILE_INCLUDED |
||||
include ../../../Makefile
|
||||
endif |
||||
endif |
||||
@ -0,0 +1,5 @@ |
||||
BACKLIGHT_ENABLE = yes
|
||||
|
||||
ifndef QUANTUM_DIR |
||||
include ../../../Makefile
|
||||
endif |
||||
@ -0,0 +1,103 @@ |
||||
#----------------------------------------------------------------------------
|
||||
# On command line:
|
||||
#
|
||||
# make all = Make software.
|
||||
#
|
||||
# make clean = Clean out built project files.
|
||||
#
|
||||
# make coff = Convert ELF to AVR COFF.
|
||||
#
|
||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
||||
#
|
||||
# make program = Download the hex file to the device.
|
||||
# Please customize your programmer settings(PROGRAM_CMD)
|
||||
#
|
||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
||||
# (must have teensy_loader_cli installed).
|
||||
#
|
||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
||||
# have dfu-programmer installed).
|
||||
#
|
||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
||||
# have Atmel FLIP installed).
|
||||
#
|
||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
||||
# (must have dfu-programmer installed).
|
||||
#
|
||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
||||
# (must have Atmel FLIP installed).
|
||||
#
|
||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
||||
# with avr-gdb or avr-insight as the front end for debugging.
|
||||
#
|
||||
# make filename.s = Just compile filename.c into the assembler code only.
|
||||
#
|
||||
# make filename.i = Create a preprocessed source file for use in submitting
|
||||
# bug reports to the GCC project.
|
||||
#
|
||||
# To rebuild project do "make clean" then "make all".
|
||||
#----------------------------------------------------------------------------
|
||||
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= no # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
AUDIO_ENABLE ?= no
|
||||
RGBLIGHT_ENABLE ?= no # Enable keyboard underlight functionality
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
@ -1,76 +1,3 @@ |
||||
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE ?= no # USB Nkey Rollover
|
||||
RGBLIGHT_ENABLE ?= yes # Enable keyboard underlight functionality (+4870)
|
||||
BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality by default
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE ?= yes # Audio output on port C6
|
||||
|
||||
ifndef QUANTUM_DIR |
||||
ifndef MAKEFILE_INCLUDED |
||||
include ../../Makefile
|
||||
endif |
||||
|
||||
|
||||
endif |
||||
@ -0,0 +1,70 @@ |
||||
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE ?= no # USB Nkey Rollover
|
||||
RGBLIGHT_ENABLE ?= yes # Enable keyboard underlight functionality (+4870)
|
||||
BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality by default
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE ?= yes # Audio output on port C6
|
||||
@ -1,70 +1,3 @@ |
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
# MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
# EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
# CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
# COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE ?= yes # Enable numpad's backlight functionality
|
||||
RGBLIGHT_ENABLE ?= yes
|
||||
# MIDI_ENABLE ?= YES # MIDI controls
|
||||
# UNICODE_ENABLE ?= YES # Unicode
|
||||
# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
|
||||
|
||||
ifndef QUANTUM_DIR |
||||
ifndef MAKEFILE_INCLUDED |
||||
include ../../Makefile
|
||||
endif |
||||
endif |
||||
@ -0,0 +1,65 @@ |
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
# MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
# EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
# CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
# COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE ?= yes # Enable numpad's backlight functionality
|
||||
RGBLIGHT_ENABLE ?= yes
|
||||
# MIDI_ENABLE ?= YES # MIDI controls
|
||||
# UNICODE_ENABLE ?= YES # Unicode
|
||||
# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
@ -1,34 +1,5 @@ |
||||
#----------------------------------------------------------------------------
|
||||
# On command line:
|
||||
#
|
||||
# make = Make software.
|
||||
#
|
||||
# make clean = Clean out built project files.
|
||||
#
|
||||
# That's pretty much all you need. To compile, always go make clean,
|
||||
# followed by make.
|
||||
#
|
||||
# For advanced users only:
|
||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
||||
# (must have teensy_loader_cli installed).
|
||||
#
|
||||
#----------------------------------------------------------------------------
|
||||
SUBPROJECT_DEFAULT = ez
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= no # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
CUSTOM_MATRIX ?= yes # Custom matrix file for the ErgoDox EZ
|
||||
SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
UNICODE_ENABLE ?= yes # Unicode
|
||||
|
||||
ifndef QUANTUM_DIR |
||||
ifndef MAKEFILE_INCLUDED |
||||
include ../../Makefile
|
||||
endif |
||||
endif |
||||
@ -1,76 +1,3 @@ |
||||
#----------------------------------------------------------------------------
|
||||
# On command line:
|
||||
#
|
||||
# make = Make software.
|
||||
#
|
||||
# make clean = Clean out built project files.
|
||||
#
|
||||
# That's pretty much all you need. To compile, always go make clean,
|
||||
# followed by make.
|
||||
#
|
||||
# For advanced users only:
|
||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
||||
# (must have teensy_loader_cli installed).
|
||||
#
|
||||
#----------------------------------------------------------------------------
|
||||
|
||||
# # project specific files
|
||||
SRC = twimaster.c \
|
||||
matrix.c
|
||||
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=512
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
|
||||
ifndef QUANTUM_DIR |
||||
ifndef MAKEFILE_INCLUDED |
||||
include ../../../Makefile
|
||||
endif |
||||
endif |
||||
@ -0,0 +1,76 @@ |
||||
#----------------------------------------------------------------------------
|
||||
# On command line:
|
||||
#
|
||||
# make = Make software.
|
||||
#
|
||||
# make clean = Clean out built project files.
|
||||
#
|
||||
# That's pretty much all you need. To compile, always go make clean,
|
||||
# followed by make.
|
||||
#
|
||||
# For advanced users only:
|
||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
||||
# (must have teensy_loader_cli installed).
|
||||
#
|
||||
#----------------------------------------------------------------------------
|
||||
|
||||
# # project specific files
|
||||
SRC = twimaster.c \
|
||||
matrix.c
|
||||
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=512
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
|
||||
ifndef QUANTUM_DIR |
||||
include ../../../Makefile
|
||||
endif |
||||
@ -1,77 +1,3 @@ |
||||
# project specific files
|
||||
SRC = matrix.c \
|
||||
led.c
|
||||
|
||||
## chip/board settings
|
||||
# - the next two should match the directories in
|
||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
||||
# - For Teensies, FAMILY = KINETIS and SERIES is either
|
||||
# KL2x (LC) or K20x (3.0,3.1,3.2).
|
||||
# - For Infinity KB, SERIES = K20x
|
||||
MCU_FAMILY = KINETIS
|
||||
MCU_SERIES = K20x
|
||||
|
||||
# Linker script to use
|
||||
# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
||||
# or <this_dir>/ld/
|
||||
# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
|
||||
# - LDSCRIPT =
|
||||
# - MKL26Z64 for Teensy LC
|
||||
# - MK20DX128 for Teensy 3.0
|
||||
# - MK20DX256 for Teensy 3.1 and 3.2
|
||||
# - MK20DX128BLDR4 for Infinity 60% with Kiibohd bootloader
|
||||
# - MK20DX256BLDR8 for Infinity ErgoDox with Kiibohd bootloader
|
||||
MCU_LDSCRIPT = MK20DX256BLDR8
|
||||
|
||||
# Startup code to use
|
||||
# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
||||
# - STARTUP =
|
||||
# - kl2x for Teensy LC
|
||||
# - k20x5 for Teensy 3.0 and Infinity 60%
|
||||
# - k20x7 for Teensy 3.1, 3.2 and Infinity ErgoDox
|
||||
MCU_STARTUP = k20x7
|
||||
|
||||
# Board: it should exist either in <chibios>/os/hal/boards/
|
||||
# or <this_dir>/boards
|
||||
# - BOARD =
|
||||
# - PJRC_TEENSY_LC for Teensy LC
|
||||
# - PJRC_TEENSY_3 for Teensy 3.0
|
||||
# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
|
||||
# - MCHCK_K20 for Infinity KB
|
||||
#BOARD = MCHCK_K20
|
||||
BOARD = PJRC_TEENSY_3_1
|
||||
|
||||
# Cortex version
|
||||
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
|
||||
MCU = cortex-m4
|
||||
|
||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
||||
# I.e. 6 for Teensy LC; 7 for Teensy 3.x
|
||||
ARMV = 7
|
||||
|
||||
# Vector table for application
|
||||
# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
|
||||
# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
|
||||
OPT_DEFS += -DCORTEX_VTOR_INIT=0x00002000
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
CUSTOM_MATRIX ?= yes # Custom matrix file
|
||||
SERIAL_LINK_ENABLE = yes
|
||||
VISUALIZER_ENABLE ?= no #temporarily disabled to make everything compile
|
||||
LCD_ENABLE ?= yes
|
||||
LED_ENABLE ?= yes
|
||||
LCD_BACKLIGHT_ENABLE ?= yes
|
||||
|
||||
ifndef QUANTUM_DIR |
||||
ifndef MAKEFILE_INCLUDED |
||||
include ../../../Makefile
|
||||
endif |
||||
|
||||
ifdef LCD_ENABLE |
||||
include $(SUBPROJECT_PATH)/drivers/gdisp/st7565ergodox/driver.mk |
||||
endif |
||||
|
||||
ifdef LED_ENABLE |
||||
include $(SUBPROJECT_PATH)/drivers/gdisp/IS31FL3731C/driver.mk |
||||
endif |
||||
endif |
||||
@ -0,0 +1,77 @@ |
||||
# project specific files
|
||||
SRC = matrix.c \
|
||||
led.c
|
||||
|
||||
## chip/board settings
|
||||
# - the next two should match the directories in
|
||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
||||
# - For Teensies, FAMILY = KINETIS and SERIES is either
|
||||
# KL2x (LC) or K20x (3.0,3.1,3.2).
|
||||
# - For Infinity KB, SERIES = K20x
|
||||
MCU_FAMILY = KINETIS
|
||||
MCU_SERIES = K20x
|
||||
|
||||
# Linker script to use
|
||||
# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
||||
# or <this_dir>/ld/
|
||||
# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
|
||||
# - LDSCRIPT =
|
||||
# - MKL26Z64 for Teensy LC
|
||||
# - MK20DX128 for Teensy 3.0
|
||||
# - MK20DX256 for Teensy 3.1 and 3.2
|
||||
# - MK20DX128BLDR4 for Infinity 60% with Kiibohd bootloader
|
||||
# - MK20DX256BLDR8 for Infinity ErgoDox with Kiibohd bootloader
|
||||
MCU_LDSCRIPT = MK20DX256BLDR8
|
||||
|
||||
# Startup code to use
|
||||
# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
||||
# - STARTUP =
|
||||
# - kl2x for Teensy LC
|
||||
# - k20x5 for Teensy 3.0 and Infinity 60%
|
||||
# - k20x7 for Teensy 3.1, 3.2 and Infinity ErgoDox
|
||||
MCU_STARTUP = k20x7
|
||||
|
||||
# Board: it should exist either in <chibios>/os/hal/boards/
|
||||
# or <this_dir>/boards
|
||||
# - BOARD =
|
||||
# - PJRC_TEENSY_LC for Teensy LC
|
||||
# - PJRC_TEENSY_3 for Teensy 3.0
|
||||
# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
|
||||
# - MCHCK_K20 for Infinity KB
|
||||
#BOARD = MCHCK_K20
|
||||
BOARD = PJRC_TEENSY_3_1
|
||||
|
||||
# Cortex version
|
||||
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
|
||||
MCU = cortex-m4
|
||||
|
||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
||||
# I.e. 6 for Teensy LC; 7 for Teensy 3.x
|
||||
ARMV = 7
|
||||
|
||||
# Vector table for application
|
||||
# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
|
||||
# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
|
||||
OPT_DEFS += -DCORTEX_VTOR_INIT=0x00002000
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
CUSTOM_MATRIX ?= yes # Custom matrix file
|
||||
SERIAL_LINK_ENABLE = yes
|
||||
VISUALIZER_ENABLE ?= no #temporarily disabled to make everything compile
|
||||
LCD_ENABLE ?= yes
|
||||
LED_ENABLE ?= yes
|
||||
LCD_BACKLIGHT_ENABLE ?= yes
|
||||
|
||||
ifndef QUANTUM_DIR |
||||
include ../../../Makefile
|
||||
endif |
||||
|
||||
ifdef LCD_ENABLE |
||||
include $(SUBPROJECT_PATH)/drivers/gdisp/st7565ergodox/driver.mk |
||||
endif |
||||
|
||||
ifdef LED_ENABLE |
||||
include $(SUBPROJECT_PATH)/drivers/gdisp/IS31FL3731C/driver.mk |
||||
endif |
||||
@ -0,0 +1,28 @@ |
||||
#----------------------------------------------------------------------------
|
||||
# On command line:
|
||||
#
|
||||
# make = Make software.
|
||||
#
|
||||
# make clean = Clean out built project files.
|
||||
#
|
||||
# That's pretty much all you need. To compile, always go make clean,
|
||||
# followed by make.
|
||||
#
|
||||
# For advanced users only:
|
||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
||||
# (must have teensy_loader_cli installed).
|
||||
#
|
||||
#----------------------------------------------------------------------------
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= no # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
CUSTOM_MATRIX ?= yes # Custom matrix file for the ErgoDox EZ
|
||||
SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
UNICODE_ENABLE ?= yes # Unicode
|
||||
@ -1,74 +1,3 @@ |
||||
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
# CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
# COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
|
||||
# MIDI_ENABLE ?= YES # MIDI controls
|
||||
# UNICODE_ENABLE ?= YES # Unicode
|
||||
# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
|
||||
|
||||
ifndef QUANTUM_DIR |
||||
include ../../Makefile
|
||||
endif |
||||
|
||||
ifndef MAKEFILE_INCLUDED |
||||
include ../../Makefile
|
||||
endif |
||||
|
||||
@ -1,161 +1,161 @@ |
||||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com> |
||||
|
||||
This program is free software: you can redistribute it and/or modify |
||||
it under the terms of the GNU General Public License as published by |
||||
the Free Software Foundation, either version 2 of the License, or |
||||
(at your option) any later version. |
||||
|
||||
This program is distributed in the hope that it will be useful, |
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
GNU General Public License for more details. |
||||
|
||||
You should have received a copy of the GNU General Public License |
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/ |
||||
|
||||
#ifndef CONFIG_H |
||||
#define CONFIG_H |
||||
|
||||
#include "config_common.h" |
||||
|
||||
/* USB Device descriptor parameter */ |
||||
#define VENDOR_ID 0xFEED |
||||
#define PRODUCT_ID 0x6060 |
||||
#define DEVICE_VER 0x0001 |
||||
#define MANUFACTURER geekhack |
||||
#define PRODUCT GH60 |
||||
#define DESCRIPTION t.m.k. keyboard firmware for GH60 |
||||
|
||||
/* key matrix size */ |
||||
#define MATRIX_ROWS 5 |
||||
#define MATRIX_COLS 14 |
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments |
||||
* |
||||
* Change this to how you wired your keyboard |
||||
* COLS: AVR pins used for columns, left to right |
||||
* ROWS: AVR pins used for rows, top to bottom |
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) |
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) |
||||
* |
||||
*/ |
||||
#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } |
||||
// Rev A
|
||||
// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 }
|
||||
// Rev B/C
|
||||
#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 } |
||||
#define UNUSED_PINS |
||||
|
||||
/* COL2ROW or ROW2COL */ |
||||
#define DIODE_DIRECTION COL2ROW |
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ |
||||
#define DEBOUNCING_DELAY 5 |
||||
|
||||
/* define if matrix has ghost (lacks anti-ghosting diodes) */ |
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* number of backlight levels */ |
||||
#define BACKLIGHT_LEVELS 3 |
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ |
||||
#define LOCKING_SUPPORT_ENABLE |
||||
/* Locking resynchronize hack */ |
||||
#define LOCKING_RESYNC_ENABLE |
||||
|
||||
/*
|
||||
* Force NKRO |
||||
* |
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved |
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the |
||||
* makefile for this to work.) |
||||
* |
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) |
||||
* until the next keyboard reset. |
||||
* |
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is |
||||
* fully operational during normal computer usage. |
||||
* |
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) |
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by |
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a |
||||
* power-up. |
||||
* |
||||
*/ |
||||
//#define FORCE_NKRO
|
||||
|
||||
/*
|
||||
* Magic Key Options |
||||
* |
||||
* Magic keys are hotkey commands that allow control over firmware functions of |
||||
* the keyboard. They are best used in combination with the HID Listen program, |
||||
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
||||
* |
||||
* The options below allow the magic key functionality to be changed. This is |
||||
* useful if your keyboard/keypad is missing keys and you want magic key support. |
||||
* |
||||
*/ |
||||
|
||||
/* key combination for magic key command */ |
||||
#define IS_COMMAND() ( \ |
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
) |
||||
|
||||
/* control how magic key switches layers */ |
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
||||
|
||||
/* override magic key keymap */ |
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
||||
//#define MAGIC_KEY_HELP1 H
|
||||
//#define MAGIC_KEY_HELP2 SLASH
|
||||
//#define MAGIC_KEY_DEBUG D
|
||||
//#define MAGIC_KEY_DEBUG_MATRIX X
|
||||
//#define MAGIC_KEY_DEBUG_KBD K
|
||||
//#define MAGIC_KEY_DEBUG_MOUSE M
|
||||
//#define MAGIC_KEY_VERSION V
|
||||
//#define MAGIC_KEY_STATUS S
|
||||
//#define MAGIC_KEY_CONSOLE C
|
||||
//#define MAGIC_KEY_LAYER0_ALT1 ESC
|
||||
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
|
||||
//#define MAGIC_KEY_LAYER0 0
|
||||
//#define MAGIC_KEY_LAYER1 1
|
||||
//#define MAGIC_KEY_LAYER2 2
|
||||
//#define MAGIC_KEY_LAYER3 3
|
||||
//#define MAGIC_KEY_LAYER4 4
|
||||
//#define MAGIC_KEY_LAYER5 5
|
||||
//#define MAGIC_KEY_LAYER6 6
|
||||
//#define MAGIC_KEY_LAYER7 7
|
||||
//#define MAGIC_KEY_LAYER8 8
|
||||
//#define MAGIC_KEY_LAYER9 9
|
||||
//#define MAGIC_KEY_BOOTLOADER PAUSE
|
||||
//#define MAGIC_KEY_LOCK CAPS
|
||||
//#define MAGIC_KEY_EEPROM E
|
||||
//#define MAGIC_KEY_NKRO N
|
||||
//#define MAGIC_KEY_SLEEP_LED Z
|
||||
|
||||
/*
|
||||
* Feature disable options |
||||
* These options are also useful to firmware size reduction. |
||||
*/ |
||||
|
||||
/* disable debug print */ |
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */ |
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */ |
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
#endif |
||||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com> |
||||
|
||||
This program is free software: you can redistribute it and/or modify |
||||
it under the terms of the GNU General Public License as published by |
||||
the Free Software Foundation, either version 2 of the License, or |
||||
(at your option) any later version. |
||||
|
||||
This program is distributed in the hope that it will be useful, |
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
GNU General Public License for more details. |
||||
|
||||
You should have received a copy of the GNU General Public License |
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/ |
||||
|
||||
#ifndef CONFIG_H |
||||
#define CONFIG_H |
||||
|
||||
#include "config_common.h" |
||||
|
||||
/* USB Device descriptor parameter */ |
||||
#define VENDOR_ID 0xFEED |
||||
#define PRODUCT_ID 0x6060 |
||||
#define DEVICE_VER 0x0001 |
||||
#define MANUFACTURER geekhack |
||||
#define PRODUCT GH60 |
||||
#define DESCRIPTION t.m.k. keyboard firmware for GH60 |
||||
|
||||
/* key matrix size */ |
||||
#define MATRIX_ROWS 5 |
||||
#define MATRIX_COLS 14 |
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments |
||||
* |
||||
* Change this to how you wired your keyboard |
||||
* COLS: AVR pins used for columns, left to right |
||||
* ROWS: AVR pins used for rows, top to bottom |
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) |
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) |
||||
* |
||||
*/ |
||||
#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } |
||||
// Rev A
|
||||
// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 }
|
||||
// Rev B/C
|
||||
#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 } |
||||
#define UNUSED_PINS |
||||
|
||||
/* COL2ROW or ROW2COL */ |
||||
#define DIODE_DIRECTION COL2ROW |
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ |
||||
#define DEBOUNCING_DELAY 5 |
||||
|
||||
/* define if matrix has ghost (lacks anti-ghosting diodes) */ |
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* number of backlight levels */ |
||||
#define BACKLIGHT_LEVELS 3 |
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ |
||||
#define LOCKING_SUPPORT_ENABLE |
||||
/* Locking resynchronize hack */ |
||||
#define LOCKING_RESYNC_ENABLE |
||||
|
||||
/*
|
||||
* Force NKRO |
||||
* |
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved |
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the |
||||
* makefile for this to work.) |
||||
* |
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) |
||||
* until the next keyboard reset. |
||||
* |
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is |
||||
* fully operational during normal computer usage. |
||||
* |
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) |
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by |
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a |
||||
* power-up. |
||||
* |
||||
*/ |
||||
//#define FORCE_NKRO
|
||||
|
||||
/*
|
||||
* Magic Key Options |
||||
* |
||||
* Magic keys are hotkey commands that allow control over firmware functions of |
||||
* the keyboard. They are best used in combination with the HID Listen program, |
||||
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
||||
* |
||||
* The options below allow the magic key functionality to be changed. This is |
||||
* useful if your keyboard/keypad is missing keys and you want magic key support. |
||||
* |
||||
*/ |
||||
|
||||
/* key combination for magic key command */ |
||||
#define IS_COMMAND() ( \ |
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
) |
||||
|
||||
/* control how magic key switches layers */ |
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
||||
|
||||
/* override magic key keymap */ |
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
||||
//#define MAGIC_KEY_HELP1 H
|
||||
//#define MAGIC_KEY_HELP2 SLASH
|
||||
//#define MAGIC_KEY_DEBUG D
|
||||
//#define MAGIC_KEY_DEBUG_MATRIX X
|
||||
//#define MAGIC_KEY_DEBUG_KBD K
|
||||
//#define MAGIC_KEY_DEBUG_MOUSE M
|
||||
//#define MAGIC_KEY_VERSION V
|
||||
//#define MAGIC_KEY_STATUS S
|
||||
//#define MAGIC_KEY_CONSOLE C
|
||||
//#define MAGIC_KEY_LAYER0_ALT1 ESC
|
||||
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
|
||||
//#define MAGIC_KEY_LAYER0 0
|
||||
//#define MAGIC_KEY_LAYER1 1
|
||||
//#define MAGIC_KEY_LAYER2 2
|
||||
//#define MAGIC_KEY_LAYER3 3
|
||||
//#define MAGIC_KEY_LAYER4 4
|
||||
//#define MAGIC_KEY_LAYER5 5
|
||||
//#define MAGIC_KEY_LAYER6 6
|
||||
//#define MAGIC_KEY_LAYER7 7
|
||||
//#define MAGIC_KEY_LAYER8 8
|
||||
//#define MAGIC_KEY_LAYER9 9
|
||||
//#define MAGIC_KEY_BOOTLOADER PAUSE
|
||||
//#define MAGIC_KEY_LOCK CAPS
|
||||
//#define MAGIC_KEY_EEPROM E
|
||||
//#define MAGIC_KEY_NKRO N
|
||||
//#define MAGIC_KEY_SLEEP_LED Z
|
||||
|
||||
/*
|
||||
* Feature disable options |
||||
* These options are also useful to firmware size reduction. |
||||
*/ |
||||
|
||||
/* disable debug print */ |
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */ |
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */ |
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
#endif |
||||
|
||||
@ -1,25 +1,25 @@ |
||||
#include "gh60.h" |
||||
|
||||
void led_set_kb(uint8_t usb_led) { |
||||
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
|
||||
|
||||
if (usb_led & (1<<USB_LED_CAPS_LOCK)) { |
||||
gh60_caps_led_on(); |
||||
} else { |
||||
gh60_caps_led_off();
|
||||
} |
||||
|
||||
// if (usb_led & (1<<USB_LED_NUM_LOCK)) {
|
||||
// gh60_esc_led_on();
|
||||
// } else {
|
||||
// gh60_esc_led_off();
|
||||
// }
|
||||
|
||||
// if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {
|
||||
// gh60_fn_led_on();
|
||||
// } else {
|
||||
// gh60_fn_led_off();
|
||||
// }
|
||||
|
||||
led_set_user(usb_led);
|
||||
} |
||||
#include "gh60.h" |
||||
|
||||
void led_set_kb(uint8_t usb_led) { |
||||
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
|
||||
|
||||
if (usb_led & (1<<USB_LED_CAPS_LOCK)) { |
||||
gh60_caps_led_on(); |
||||
} else { |
||||
gh60_caps_led_off();
|
||||
} |
||||
|
||||
// if (usb_led & (1<<USB_LED_NUM_LOCK)) {
|
||||
// gh60_esc_led_on();
|
||||
// } else {
|
||||
// gh60_esc_led_off();
|
||||
// }
|
||||
|
||||
// if (usb_led & (1<<USB_LED_SCROLL_LOCK)) {
|
||||
// gh60_fn_led_on();
|
||||
// } else {
|
||||
// gh60_fn_led_off();
|
||||
// }
|
||||
|
||||
led_set_user(usb_led);
|
||||
} |
||||
|
||||
@ -1,74 +1,74 @@ |
||||
#ifndef GH60_H |
||||
#define GH60_H |
||||
|
||||
#include "quantum.h" |
||||
#include "led.h" |
||||
|
||||
/* GH60 LEDs
|
||||
* GPIO pads |
||||
* 0 F7 WASD LEDs |
||||
* 1 F6 ESC LED |
||||
* 2 F5 FN LED |
||||
* 3 F4 POKER Arrow LEDs |
||||
* B2 Capslock LED |
||||
* B0 not connected |
||||
*/ |
||||
inline void gh60_caps_led_on(void) { DDRB |= (1<<2); PORTB &= ~(1<<2); } |
||||
inline void gh60_poker_leds_on(void) { DDRF |= (1<<4); PORTF &= ~(1<<4); } |
||||
inline void gh60_fn_led_on(void) { DDRF |= (1<<5); PORTF &= ~(1<<5); } |
||||
inline void gh60_esc_led_on(void) { DDRF |= (1<<6); PORTF &= ~(1<<6); } |
||||
inline void gh60_wasd_leds_on(void) { DDRF |= (1<<7); PORTF &= ~(1<<7); } |
||||
|
||||
inline void gh60_caps_led_off(void) { DDRB &= ~(1<<2); PORTB &= ~(1<<2); } |
||||
inline void gh60_poker_leds_off(void) { DDRF &= ~(1<<4); PORTF &= ~(1<<4); } |
||||
inline void gh60_fn_led_off(void) { DDRF &= ~(1<<5); PORTF &= ~(1<<5); } |
||||
inline void gh60_esc_led_off(void) { DDRF &= ~(1<<6); PORTF &= ~(1<<6); } |
||||
inline void gh60_wasd_leds_off(void) { DDRF &= ~(1<<7); PORTF &= ~(1<<7); } |
||||
|
||||
/* GH60 keymap definition macro
|
||||
* K2C, K31 and K3C are extra keys for ISO |
||||
*/ |
||||
#define KEYMAP( \ |
||||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
|
||||
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
|
||||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \
|
||||
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
|
||||
K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D \
|
||||
) { \
|
||||
{ KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D }, \
|
||||
{ KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D }, \
|
||||
{ KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D }, \
|
||||
{ KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D }, \
|
||||
{ KC_##K40, KC_##K41, KC_##K42, KC_NO, KC_NO, KC_##K45, KC_NO, KC_NO, KC_NO, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D } \
|
||||
} |
||||
|
||||
/* ANSI valiant. No extra keys for ISO */ |
||||
#define KEYMAP_ANSI( \ |
||||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
|
||||
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
|
||||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \
|
||||
K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \
|
||||
K40, K41, K42, K45, K4A, K4B, K4C, K4D \
|
||||
) KEYMAP( \
|
||||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
|
||||
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
|
||||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, NO, K2D, \
|
||||
K30, NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, NO, K3D, \
|
||||
K40, K41, K42, K45, NO, K4A, K4B, K4C, K4D \
|
||||
) |
||||
|
||||
#define KEYMAP_HHKB( \ |
||||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K49,\
|
||||
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
|
||||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \
|
||||
K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3C, \
|
||||
K40, K41, K42, K45, K4A, K4B, K4C, K4D \
|
||||
) KEYMAP( \
|
||||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
|
||||
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
|
||||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, NO, K2D, \
|
||||
K30, NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
|
||||
K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D \
|
||||
) |
||||
|
||||
#endif |
||||
#ifndef GH60_H |
||||
#define GH60_H |
||||
|
||||
#include "quantum.h" |
||||
#include "led.h" |
||||
|
||||
/* GH60 LEDs
|
||||
* GPIO pads |
||||
* 0 F7 WASD LEDs |
||||
* 1 F6 ESC LED |
||||
* 2 F5 FN LED |
||||
* 3 F4 POKER Arrow LEDs |
||||
* B2 Capslock LED |
||||
* B0 not connected |
||||
*/ |
||||
inline void gh60_caps_led_on(void) { DDRB |= (1<<2); PORTB &= ~(1<<2); } |
||||
inline void gh60_poker_leds_on(void) { DDRF |= (1<<4); PORTF &= ~(1<<4); } |
||||
inline void gh60_fn_led_on(void) { DDRF |= (1<<5); PORTF &= ~(1<<5); } |
||||
inline void gh60_esc_led_on(void) { DDRF |= (1<<6); PORTF &= ~(1<<6); } |
||||
inline void gh60_wasd_leds_on(void) { DDRF |= (1<<7); PORTF &= ~(1<<7); } |
||||
|
||||
inline void gh60_caps_led_off(void) { DDRB &= ~(1<<2); PORTB &= ~(1<<2); } |
||||
inline void gh60_poker_leds_off(void) { DDRF &= ~(1<<4); PORTF &= ~(1<<4); } |
||||
inline void gh60_fn_led_off(void) { DDRF &= ~(1<<5); PORTF &= ~(1<<5); } |
||||
inline void gh60_esc_led_off(void) { DDRF &= ~(1<<6); PORTF &= ~(1<<6); } |
||||
inline void gh60_wasd_leds_off(void) { DDRF &= ~(1<<7); PORTF &= ~(1<<7); } |
||||
|
||||
/* GH60 keymap definition macro
|
||||
* K2C, K31 and K3C are extra keys for ISO |
||||
*/ |
||||
#define KEYMAP( \ |
||||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
|
||||
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
|
||||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \
|
||||
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
|
||||
K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D \
|
||||
) { \
|
||||
{ KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D }, \
|
||||
{ KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D }, \
|
||||
{ KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D }, \
|
||||
{ KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D }, \
|
||||
{ KC_##K40, KC_##K41, KC_##K42, KC_NO, KC_NO, KC_##K45, KC_NO, KC_NO, KC_NO, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D } \
|
||||
} |
||||
|
||||
/* ANSI valiant. No extra keys for ISO */ |
||||
#define KEYMAP_ANSI( \ |
||||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
|
||||
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
|
||||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \
|
||||
K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \
|
||||
K40, K41, K42, K45, K4A, K4B, K4C, K4D \
|
||||
) KEYMAP( \
|
||||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
|
||||
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
|
||||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, NO, K2D, \
|
||||
K30, NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, NO, K3D, \
|
||||
K40, K41, K42, K45, NO, K4A, K4B, K4C, K4D \
|
||||
) |
||||
|
||||
#define KEYMAP_HHKB( \ |
||||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K49,\
|
||||
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
|
||||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \
|
||||
K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3C, \
|
||||
K40, K41, K42, K45, K4A, K4B, K4C, K4D \
|
||||
) KEYMAP( \
|
||||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
|
||||
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
|
||||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, NO, K2D, \
|
||||
K30, NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \
|
||||
K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D \
|
||||
) |
||||
|
||||
#endif |
||||
|
||||
@ -1,112 +1,112 @@ |
||||
#----------------------------------------------------------------------------
|
||||
# On command line:
|
||||
#
|
||||
# make all = Make software.
|
||||
#
|
||||
# make clean = Clean out built project files.
|
||||
#
|
||||
# make coff = Convert ELF to AVR COFF.
|
||||
#
|
||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
||||
#
|
||||
# make program = Download the hex file to the device.
|
||||
# Please customize your programmer settings(PROGRAM_CMD)
|
||||
#
|
||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
||||
# (must have teensy_loader_cli installed).
|
||||
#
|
||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
||||
# have dfu-programmer installed).
|
||||
#
|
||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
||||
# have Atmel FLIP installed).
|
||||
#
|
||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
||||
# (must have dfu-programmer installed).
|
||||
#
|
||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
||||
# (must have Atmel FLIP installed).
|
||||
#
|
||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
||||
# with avr-gdb or avr-insight as the front end for debugging.
|
||||
#
|
||||
# make filename.s = Just compile filename.c into the assembler code only.
|
||||
#
|
||||
# make filename.i = Create a preprocessed source file for use in submitting
|
||||
# bug reports to the GCC project.
|
||||
#
|
||||
# To rebuild project do "make clean" then "make all".
|
||||
#----------------------------------------------------------------------------
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
# CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
# COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
|
||||
# MIDI_ENABLE ?= YES # MIDI controls
|
||||
# UNICODE_ENABLE ?= YES # Unicode
|
||||
# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE ?= yes # Enable RGB Underglow
|
||||
|
||||
ifndef QUANTUM_DIR |
||||
include ../../../../Makefile
|
||||
endif |
||||
|
||||
#----------------------------------------------------------------------------
|
||||
# On command line:
|
||||
#
|
||||
# make all = Make software.
|
||||
#
|
||||
# make clean = Clean out built project files.
|
||||
#
|
||||
# make coff = Convert ELF to AVR COFF.
|
||||
#
|
||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
||||
#
|
||||
# make program = Download the hex file to the device.
|
||||
# Please customize your programmer settings(PROGRAM_CMD)
|
||||
#
|
||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
||||
# (must have teensy_loader_cli installed).
|
||||
#
|
||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
||||
# have dfu-programmer installed).
|
||||
#
|
||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
||||
# have Atmel FLIP installed).
|
||||
#
|
||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
||||
# (must have dfu-programmer installed).
|
||||
#
|
||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
||||
# (must have Atmel FLIP installed).
|
||||
#
|
||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
||||
# with avr-gdb or avr-insight as the front end for debugging.
|
||||
#
|
||||
# make filename.s = Just compile filename.c into the assembler code only.
|
||||
#
|
||||
# make filename.i = Create a preprocessed source file for use in submitting
|
||||
# bug reports to the GCC project.
|
||||
#
|
||||
# To rebuild project do "make clean" then "make all".
|
||||
#----------------------------------------------------------------------------
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
# CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
# COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
|
||||
# MIDI_ENABLE ?= YES # MIDI controls
|
||||
# UNICODE_ENABLE ?= YES # Unicode
|
||||
# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE ?= yes # Enable RGB Underglow
|
||||
|
||||
ifndef QUANTUM_DIR |
||||
include ../../../../Makefile
|
||||
endif |
||||
|
||||
|
||||
@ -1,190 +1,190 @@ |
||||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com> |
||||
|
||||
This program is free software: you can redistribute it and/or modify |
||||
it under the terms of the GNU General Public License as published by |
||||
the Free Software Foundation, either version 2 of the License, or |
||||
(at your option) any later version. |
||||
|
||||
This program is distributed in the hope that it will be useful, |
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
GNU General Public License for more details. |
||||
|
||||
You should have received a copy of the GNU General Public License |
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/ |
||||
|
||||
#ifndef CONFIG_H |
||||
#define CONFIG_H |
||||
|
||||
#include "config_common.h" |
||||
|
||||
/* USB Device descriptor parameter */ |
||||
#define VENDOR_ID 0xFEED |
||||
#define PRODUCT_ID 0x6060 |
||||
#define DEVICE_VER 0x0001 |
||||
#define MANUFACTURER geekhack |
||||
#define PRODUCT GH60 |
||||
#define DESCRIPTION t.m.k. keyboard firmware for GH60 |
||||
|
||||
/* key matrix size */ |
||||
#define MATRIX_ROWS 5 |
||||
#define MATRIX_COLS 14 |
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments |
||||
* |
||||
* Change this to how you wired your keyboard |
||||
* COLS: AVR pins used for columns, left to right |
||||
* ROWS: AVR pins used for rows, top to bottom |
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) |
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) |
||||
* |
||||
*/ |
||||
#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } |
||||
// Rev A
|
||||
// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 }
|
||||
// Rev B/C
|
||||
#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 } |
||||
#define UNUSED_PINS |
||||
|
||||
/* COL2ROW or ROW2COL */ |
||||
#define DIODE_DIRECTION COL2ROW |
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ |
||||
#define DEBOUNCING_DELAY 5 |
||||
|
||||
/* define if matrix has ghost (lacks anti-ghosting diodes) */ |
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* number of backlight levels */ |
||||
#define BACKLIGHT_LEVELS 3 |
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ |
||||
#define LOCKING_SUPPORT_ENABLE |
||||
/* Locking resynchronize hack */ |
||||
#define LOCKING_RESYNC_ENABLE |
||||
|
||||
/*
|
||||
* Force NKRO |
||||
* |
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved |
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the |
||||
* makefile for this to work.) |
||||
* |
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) |
||||
* until the next keyboard reset. |
||||
* |
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is |
||||
* fully operational during normal computer usage. |
||||
* |
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) |
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by |
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a |
||||
* power-up. |
||||
* |
||||
*/ |
||||
//#define FORCE_NKRO
|
||||
|
||||
/*
|
||||
* Magic Key Options |
||||
* |
||||
* Magic keys are hotkey commands that allow control over firmware functions of |
||||
* the keyboard. They are best used in combination with the HID Listen program, |
||||
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
||||
* |
||||
* The options below allow the magic key functionality to be changed. This is |
||||
* useful if your keyboard/keypad is missing keys and you want magic key support. |
||||
* |
||||
*/ |
||||
|
||||
/* key combination for magic key command */ |
||||
#define IS_COMMAND() ( \ |
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
) |
||||
|
||||
/* control how magic key switches layers */ |
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
||||
|
||||
/* override magic key keymap */ |
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
||||
//#define MAGIC_KEY_HELP1 H
|
||||
//#define MAGIC_KEY_HELP2 SLASH
|
||||
//#define MAGIC_KEY_DEBUG D
|
||||
//#define MAGIC_KEY_DEBUG_MATRIX X
|
||||
//#define MAGIC_KEY_DEBUG_KBD K
|
||||
//#define MAGIC_KEY_DEBUG_MOUSE M
|
||||
//#define MAGIC_KEY_VERSION V
|
||||
//#define MAGIC_KEY_STATUS S
|
||||
//#define MAGIC_KEY_CONSOLE C
|
||||
//#define MAGIC_KEY_LAYER0_ALT1 ESC
|
||||
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
|
||||
//#define MAGIC_KEY_LAYER0 0
|
||||
//#define MAGIC_KEY_LAYER1 1
|
||||
//#define MAGIC_KEY_LAYER2 2
|
||||
//#define MAGIC_KEY_LAYER3 3
|
||||
//#define MAGIC_KEY_LAYER4 4
|
||||
//#define MAGIC_KEY_LAYER5 5
|
||||
//#define MAGIC_KEY_LAYER6 6
|
||||
//#define MAGIC_KEY_LAYER7 7
|
||||
//#define MAGIC_KEY_LAYER8 8
|
||||
//#define MAGIC_KEY_LAYER9 9
|
||||
//#define MAGIC_KEY_BOOTLOADER PAUSE
|
||||
//#define MAGIC_KEY_LOCK CAPS
|
||||
//#define MAGIC_KEY_EEPROM E
|
||||
//#define MAGIC_KEY_NKRO N
|
||||
//#define MAGIC_KEY_SLEEP_LED Z
|
||||
|
||||
/*
|
||||
* Feature disable options |
||||
* These options are also useful to firmware size reduction. |
||||
*/ |
||||
|
||||
/* disable debug print */ |
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */ |
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */ |
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
/*
|
||||
* RGB Underglow |
||||
* These settings are for the F4 by default: |
||||
*
|
||||
* |
||||
* #define ws2812_PORTREG PORTF |
||||
* #define ws2812_DDRREG DDRF |
||||
* #define ws2812_pin PF4 |
||||
* #define RGBLED_NUM 14 // Number of LEDs
|
||||
* #define RGBLIGHT_HUE_STEP 10 |
||||
* #define RGBLIGHT_SAT_STEP 17 |
||||
* #define RGBLIGHT_VAL_STEP 17 |
||||
* |
||||
* The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects.
|
||||
* To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations.
|
||||
* For details, please check this keymap. keyboard/planck/keymaps/yang/keymap.c |
||||
*/ |
||||
|
||||
/* Deprecated code below
|
||||
#define ws2812_PORTREG PORTF |
||||
#define ws2812_DDRREG DDRF |
||||
#define ws2812_pin PF4 |
||||
*/
|
||||
#define RGB_DI_PIN F4 |
||||
#define RGBLIGHT_TIMER |
||||
#define RGBLED_NUM 8 // Number of LEDs
|
||||
#define RGBLIGHT_HUE_STEP 8 |
||||
#define RGBLIGHT_SAT_STEP 8 |
||||
#define RGBLIGHT_VAL_STEP 8 |
||||
#endif |
||||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com> |
||||
|
||||
This program is free software: you can redistribute it and/or modify |
||||
it under the terms of the GNU General Public License as published by |
||||
the Free Software Foundation, either version 2 of the License, or |
||||
(at your option) any later version. |
||||
|
||||
This program is distributed in the hope that it will be useful, |
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
GNU General Public License for more details. |
||||
|
||||
You should have received a copy of the GNU General Public License |
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/ |
||||
|
||||
#ifndef CONFIG_H |
||||
#define CONFIG_H |
||||
|
||||
#include "config_common.h" |
||||
|
||||
/* USB Device descriptor parameter */ |
||||
#define VENDOR_ID 0xFEED |
||||
#define PRODUCT_ID 0x6060 |
||||
#define DEVICE_VER 0x0001 |
||||
#define MANUFACTURER geekhack |
||||
#define PRODUCT GH60 |
||||
#define DESCRIPTION t.m.k. keyboard firmware for GH60 |
||||
|
||||
/* key matrix size */ |
||||
#define MATRIX_ROWS 5 |
||||
#define MATRIX_COLS 14 |
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments |
||||
* |
||||
* Change this to how you wired your keyboard |
||||
* COLS: AVR pins used for columns, left to right |
||||
* ROWS: AVR pins used for rows, top to bottom |
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) |
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) |
||||
* |
||||
*/ |
||||
#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } |
||||
// Rev A
|
||||
// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 }
|
||||
// Rev B/C
|
||||
#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 } |
||||
#define UNUSED_PINS |
||||
|
||||
/* COL2ROW or ROW2COL */ |
||||
#define DIODE_DIRECTION COL2ROW |
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ |
||||
#define DEBOUNCING_DELAY 5 |
||||
|
||||
/* define if matrix has ghost (lacks anti-ghosting diodes) */ |
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* number of backlight levels */ |
||||
#define BACKLIGHT_LEVELS 3 |
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ |
||||
#define LOCKING_SUPPORT_ENABLE |
||||
/* Locking resynchronize hack */ |
||||
#define LOCKING_RESYNC_ENABLE |
||||
|
||||
/*
|
||||
* Force NKRO |
||||
* |
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved |
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the |
||||
* makefile for this to work.) |
||||
* |
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) |
||||
* until the next keyboard reset. |
||||
* |
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is |
||||
* fully operational during normal computer usage. |
||||
* |
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) |
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by |
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a |
||||
* power-up. |
||||
* |
||||
*/ |
||||
//#define FORCE_NKRO
|
||||
|
||||
/*
|
||||
* Magic Key Options |
||||
* |
||||
* Magic keys are hotkey commands that allow control over firmware functions of |
||||
* the keyboard. They are best used in combination with the HID Listen program, |
||||
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
||||
* |
||||
* The options below allow the magic key functionality to be changed. This is |
||||
* useful if your keyboard/keypad is missing keys and you want magic key support. |
||||
* |
||||
*/ |
||||
|
||||
/* key combination for magic key command */ |
||||
#define IS_COMMAND() ( \ |
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
) |
||||
|
||||
/* control how magic key switches layers */ |
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
||||
|
||||
/* override magic key keymap */ |
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
||||
//#define MAGIC_KEY_HELP1 H
|
||||
//#define MAGIC_KEY_HELP2 SLASH
|
||||
//#define MAGIC_KEY_DEBUG D
|
||||
//#define MAGIC_KEY_DEBUG_MATRIX X
|
||||
//#define MAGIC_KEY_DEBUG_KBD K
|
||||
//#define MAGIC_KEY_DEBUG_MOUSE M
|
||||
//#define MAGIC_KEY_VERSION V
|
||||
//#define MAGIC_KEY_STATUS S
|
||||
//#define MAGIC_KEY_CONSOLE C
|
||||
//#define MAGIC_KEY_LAYER0_ALT1 ESC
|
||||
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
|
||||
//#define MAGIC_KEY_LAYER0 0
|
||||
//#define MAGIC_KEY_LAYER1 1
|
||||
//#define MAGIC_KEY_LAYER2 2
|
||||
//#define MAGIC_KEY_LAYER3 3
|
||||
//#define MAGIC_KEY_LAYER4 4
|
||||
//#define MAGIC_KEY_LAYER5 5
|
||||
//#define MAGIC_KEY_LAYER6 6
|
||||
//#define MAGIC_KEY_LAYER7 7
|
||||
//#define MAGIC_KEY_LAYER8 8
|
||||
//#define MAGIC_KEY_LAYER9 9
|
||||
//#define MAGIC_KEY_BOOTLOADER PAUSE
|
||||
//#define MAGIC_KEY_LOCK CAPS
|
||||
//#define MAGIC_KEY_EEPROM E
|
||||
//#define MAGIC_KEY_NKRO N
|
||||
//#define MAGIC_KEY_SLEEP_LED Z
|
||||
|
||||
/*
|
||||
* Feature disable options |
||||
* These options are also useful to firmware size reduction. |
||||
*/ |
||||
|
||||
/* disable debug print */ |
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */ |
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */ |
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
/*
|
||||
* RGB Underglow |
||||
* These settings are for the F4 by default: |
||||
*
|
||||
* |
||||
* #define ws2812_PORTREG PORTF |
||||
* #define ws2812_DDRREG DDRF |
||||
* #define ws2812_pin PF4 |
||||
* #define RGBLED_NUM 14 // Number of LEDs
|
||||
* #define RGBLIGHT_HUE_STEP 10 |
||||
* #define RGBLIGHT_SAT_STEP 17 |
||||
* #define RGBLIGHT_VAL_STEP 17 |
||||
* |
||||
* The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects.
|
||||
* To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations.
|
||||
* For details, please check this keymap. keyboard/planck/keymaps/yang/keymap.c |
||||
*/ |
||||
|
||||
/* Deprecated code below
|
||||
#define ws2812_PORTREG PORTF |
||||
#define ws2812_DDRREG DDRF |
||||
#define ws2812_pin PF4 |
||||
*/
|
||||
#define RGB_DI_PIN F4 |
||||
#define RGBLIGHT_TIMER |
||||
#define RGBLED_NUM 8 // Number of LEDs
|
||||
#define RGBLIGHT_HUE_STEP 8 |
||||
#define RGBLIGHT_SAT_STEP 8 |
||||
#define RGBLIGHT_VAL_STEP 8 |
||||
#endif |
||||
|
||||
@ -1,18 +1,18 @@ |
||||
/* Column pin configuration |
||||
* col: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 |
||||
* pin: F0 F1 E6 C7 C6 B6 D4 B1 B7 B5 B4 D7 D6 B3 (Rev.C) |
||||
*/ |
||||
|
||||
/* Row pin configuration |
||||
* row: 0 1 2 3 4 |
||||
* pin: D0 D1 D2 D3 D5 |
||||
*/ |
||||
|
||||
GPIO pads |
||||
0 F7 WASD LEDs |
||||
1 F6 ESC LED |
||||
2 F5 FN LED |
||||
3 F4 POKER Arrow LEDs |
||||
|
||||
B2 Capslock LED |
||||
/* Column pin configuration |
||||
* col: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 |
||||
* pin: F0 F1 E6 C7 C6 B6 D4 B1 B7 B5 B4 D7 D6 B3 (Rev.C) |
||||
*/ |
||||
|
||||
/* Row pin configuration |
||||
* row: 0 1 2 3 4 |
||||
* pin: D0 D1 D2 D3 D5 |
||||
*/ |
||||
|
||||
GPIO pads |
||||
0 F7 WASD LEDs |
||||
1 F6 ESC LED |
||||
2 F5 FN LED |
||||
3 F4 POKER Arrow LEDs |
||||
|
||||
B2 Capslock LED |
||||
B0 not connected |
||||
@ -1,60 +1,62 @@ |
||||
## gh60 Rev C keyboard firmware |
||||
|
||||
 |
||||
|
||||
/* Column pin configuration |
||||
* col: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 |
||||
* pin: F0 F1 E6 C7 C6 B6 D4 B1 B7 B5 B4 D7 D6 B3 (Rev.C) |
||||
*/ |
||||
|
||||
/* Row pin configuration |
||||
* row: 0 1 2 3 4 |
||||
* pin: D0 D1 D2 D3 D5 |
||||
*/ |
||||
|
||||
GPIO pads |
||||
0 F7 WASD LEDs |
||||
1 F6 ESC LED |
||||
2 F5 FN LED |
||||
3 F4 POKER Arrow LEDs |
||||
|
||||
B2 Capslock LED |
||||
B0 not connected |
||||
|
||||
Functions to controls LED clusters |
||||
|
||||
gh60_caps_led_on() |
||||
gh60_poker_leds_on() |
||||
gh60_fn_led_on() |
||||
gh60_esc_led_on() |
||||
gh60_wasd_leds_on() |
||||
|
||||
gh60_caps_led_off() |
||||
gh60_poker_leds_off() |
||||
gh60_fn_led_off() |
||||
gh60_esc_led_off() |
||||
gh60_wasd_leds_off() |
||||
|
||||
====================== |
||||
|
||||
## Quantum MK Firmware |
||||
|
||||
For the full Quantum feature list, see [the parent readme.md](/readme.md). |
||||
|
||||
## Building |
||||
|
||||
Download or clone the whole firmware and navigate to the keyboards/gh60_rev_c folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. |
||||
|
||||
Depending on which keymap you would like to use, you will have to compile slightly differently. |
||||
|
||||
### Default |
||||
To build with the default keymap, simply run `make`. |
||||
|
||||
### Other Keymaps |
||||
Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files. |
||||
|
||||
To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like: |
||||
``` |
||||
$ make KEYMAP=[default|jack|<name>] |
||||
``` |
||||
Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder. |
||||
## gh60 Rev C keyboard firmware |
||||
|
||||
 |
||||
|
||||
/* Column pin configuration |
||||
* col: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 |
||||
* pin: F0 F1 E6 C7 C6 B6 D4 B1 B7 B5 B4 D7 D6 B3 (Rev.C) |
||||
*/ |
||||
|
||||
/* Row pin configuration |
||||
* row: 0 1 2 3 4 |
||||
* pin: D0 D1 D2 D3 D5 |
||||
*/ |
||||
|
||||
GPIO pads |
||||
0 F7 WASD LEDs |
||||
1 F6 ESC LED |
||||
2 F5 FN LED |
||||
3 F4 POKER Arrow LEDs |
||||
|
||||
B2 Capslock LED |
||||
B0 not connected |
||||
|
||||
Functions to controls LED clusters |
||||
|
||||
gh60_caps_led_on() |
||||
gh60_poker_leds_on() |
||||
gh60_fn_led_on() |
||||
gh60_esc_led_on() |
||||
gh60_wasd_leds_on() |
||||
|
||||
gh60_caps_led_off() |
||||
gh60_poker_leds_off() |
||||
gh60_fn_led_off() |
||||
gh60_esc_led_off() |
||||
gh60_wasd_leds_off() |
||||
|
||||
====================== |
||||
|
||||
## Quantum MK Firmware |
||||
|
||||
For the full Quantum feature list, see [the parent readme.md](/readme.md). |
||||
|
||||
## Building |
||||
|
||||
Download or clone the whole firmware and navigate to the keyboards/gh60_rev_c folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. |
||||
|
||||
Depending on which keymap you would like to use, you will have to compile slightly differently. |
||||
|
||||
### Default |
||||
To build with the default keymap, simply run `make default`. |
||||
|
||||
### Other Keymaps |
||||
Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files. |
||||
|
||||
To build the firmware binary hex file with a keymap just do `make` with a keymap like this: |
||||
|
||||
``` |
||||
$ make [default|jack|<name>] |
||||
``` |
||||
|
||||
Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder. |
||||
|
||||
@ -0,0 +1,66 @@ |
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
# CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
# COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
|
||||
# MIDI_ENABLE ?= YES # MIDI controls
|
||||
# UNICODE_ENABLE ?= YES # Unicode
|
||||
# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
@ -1,73 +1,3 @@ |
||||
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=512
|
||||
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE ?= no # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE ?= no # Audio output on port C6
|
||||
|
||||
ifndef QUANTUM_DIR |
||||
ifndef MAKEFILE_INCLUDED |
||||
include ../../../Makefile
|
||||
endif |
||||
|
||||
|
||||
endif |
||||
@ -0,0 +1,73 @@ |
||||
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=512
|
||||
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE ?= no # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE ?= no # Audio output on port C6
|
||||
|
||||
ifndef QUANTUM_DIR |
||||
include ../../../Makefile
|
||||
endif |
||||
|
||||
|
||||
@ -1,3 +1,3 @@ |
||||
ifndef QUANTUM_DIR |
||||
ifndef MAKEFILE_INCLUDED |
||||
include ../../Makefile
|
||||
endif |
||||
@ -1,73 +1,3 @@ |
||||
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=512
|
||||
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE ?= no # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE ?= no # Audio output on port C6
|
||||
|
||||
ifndef QUANTUM_DIR |
||||
ifndef MAKEFILE_INCLUDED |
||||
include ../../../Makefile
|
||||
endif |
||||
|
||||
|
||||
endif |
||||
@ -0,0 +1,73 @@ |
||||
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=512
|
||||
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE ?= no # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE ?= no # Audio output on port C6
|
||||
|
||||
ifndef QUANTUM_DIR |
||||
include ../../../Makefile
|
||||
endif |
||||
|
||||
|
||||
@ -1,71 +1,3 @@ |
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=512
|
||||
|
||||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= no # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
NKRO_ENABLE ?= yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
AUDIO_ENABLE ?= no # Audio output on port C6
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE ?= yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
|
||||
ifndef QUANTUM_DIR |
||||
ifndef MAKEFILE_INCLUDED |
||||
include ../../../Makefile
|
||||
endif |
||||
@ -0,0 +1,67 @@ |
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=512
|
||||
|
||||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= no # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
NKRO_ENABLE ?= yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
AUDIO_ENABLE ?= no # Audio output on port C6
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE ?= yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
@ -1,65 +1,3 @@ |
||||
|
||||
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
||||
#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
|
||||
|
||||
ifndef QUANTUM_DIR |
||||
ifndef MAKEFILE_INCLUDED |
||||
include ../../../Makefile
|
||||
endif |
||||
@ -0,0 +1,65 @@ |
||||
|
||||
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
||||
#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
|
||||
|
||||
ifndef QUANTUM_DIR |
||||
include ../../../Makefile
|
||||
endif |
||||
@ -1,89 +1,3 @@ |
||||
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
# for avr upload
|
||||
USB ?= /dev/cu.usbmodem1421
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
|
||||
ifdef TEENSY2 |
||||
OPT_DEFS += -DATREUS_TEENSY2
|
||||
ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex
|
||||
else |
||||
OPT_DEFS += -DATREUS_ASTAR
|
||||
OPT_DEFS += -DCATERINA_BOOTLOADER
|
||||
ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
|
||||
avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
|
||||
endif |
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# MCU name
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= no # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= no # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE ?= no # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE ?= no # Audio output on port C6
|
||||
RGBLIGHT_ENABLE = yes
|
||||
|
||||
ifndef QUANTUM_DIR |
||||
ifndef MAKEFILE_INCLUDED |
||||
include ../../../Makefile
|
||||
endif |
||||
|
||||
upload: build |
||||
$(ATREUS_UPLOAD_COMMAND)
|
||||
|
||||
endif |
||||
@ -0,0 +1,89 @@ |
||||
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
# for avr upload
|
||||
USB ?= /dev/cu.usbmodem1421
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
|
||||
ifdef TEENSY2 |
||||
OPT_DEFS += -DATREUS_TEENSY2
|
||||
ATREUS_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex
|
||||
else |
||||
OPT_DEFS += -DATREUS_ASTAR
|
||||
OPT_DEFS += -DCATERINA_BOOTLOADER
|
||||
ATREUS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
|
||||
avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
|
||||
endif |
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# MCU name
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= no # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= no # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE ?= no # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE ?= no # Audio output on port C6
|
||||
RGBLIGHT_ENABLE = yes
|
||||
|
||||
ifndef QUANTUM_DIR |
||||
include ../../../Makefile
|
||||
endif |
||||
|
||||
upload: build |
||||
$(ATREUS_UPLOAD_COMMAND)
|
||||
|
||||
@ -1,90 +1,3 @@ |
||||
|
||||
|
||||
# project specific files
|
||||
SRC = matrix.c
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
#OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
# as per original hasu settings
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=512
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
CUSTOM_MATRIX ?= yes # Custom matrix file for the HHKB
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
|
||||
# NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
|
||||
# MIDI_ENABLE ?= YES # MIDI controls
|
||||
# UNICODE_ENABLE ?= YES # Unicode
|
||||
# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
|
||||
|
||||
|
||||
ifndef QUANTUM_DIR |
||||
ifndef MAKEFILE_INCLUDED |
||||
include ../../Makefile
|
||||
endif |
||||
|
||||
ifneq (, $(findstring yes, $(HHKB_JP))) |
||||
OPT_DEFS += -DHHKB_JP
|
||||
endif |
||||
|
||||
debug-on: EXTRAFLAGS += -DDEBUG -DDEBUG_ACTION |
||||
debug-on: all |
||||
|
||||
debug-off: EXTRAFLAGS += -DNO_DEBUG -DNO_PRINT |
||||
debug-off: OPT_DEFS := $(filter-out -DCONSOLE_ENABLE,$(OPT_DEFS)) |
||||
debug-off: all |
||||
endif |
||||
@ -0,0 +1,84 @@ |
||||
|
||||
|
||||
# project specific files
|
||||
SRC = matrix.c
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
#OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
# as per original hasu settings
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=512
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
CUSTOM_MATRIX ?= yes # Custom matrix file for the HHKB
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
|
||||
# NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
|
||||
# MIDI_ENABLE ?= YES # MIDI controls
|
||||
# UNICODE_ENABLE ?= YES # Unicode
|
||||
# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
|
||||
ifneq (, $(findstring yes, $(HHKB_JP))) |
||||
OPT_DEFS += -DHHKB_JP
|
||||
endif |
||||
|
||||
debug-on: EXTRAFLAGS += -DDEBUG -DDEBUG_ACTION |
||||
debug-on: all |
||||
|
||||
debug-off: EXTRAFLAGS += -DNO_DEBUG -DNO_PRINT |
||||
debug-off: OPT_DEFS := $(filter-out -DCONSOLE_ENABLE,$(OPT_DEFS)) |
||||
debug-off: all |
||||
@ -0,0 +1,3 @@ |
||||
ifndef MAKEFILE_INCLUDED |
||||
include ../../Makefile
|
||||
endif |
||||
File diff suppressed because it is too large
Load Diff
@ -1,353 +1,353 @@ |
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio |
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License"); |
||||
you may not use this file except in compliance with the License. |
||||
You may obtain a copy of the License at |
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software |
||||
distributed under the License is distributed on an "AS IS" BASIS, |
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
||||
See the License for the specific language governing permissions and |
||||
limitations under the License. |
||||
*/ |
||||
|
||||
/**
|
||||
* @file templates/halconf.h |
||||
* @brief HAL configuration header. |
||||
* @details HAL configuration file, this file allows to enable or disable the |
||||
* various device drivers from your application. You may also use |
||||
* this file in order to override the device drivers default settings. |
||||
* |
||||
* @addtogroup HAL_CONF |
||||
* @{ |
||||
*/ |
||||
|
||||
#ifndef _HALCONF_H_ |
||||
#define _HALCONF_H_ |
||||
|
||||
#include "mcuconf.h" |
||||
|
||||
/**
|
||||
* @brief Enables the PAL subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) |
||||
#define HAL_USE_PAL TRUE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the ADC subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) |
||||
#define HAL_USE_ADC FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the CAN subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) |
||||
#define HAL_USE_CAN FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the DAC subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) |
||||
#define HAL_USE_DAC FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the EXT subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) |
||||
#define HAL_USE_EXT FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the GPT subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) |
||||
#define HAL_USE_GPT FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the I2C subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) |
||||
#define HAL_USE_I2C FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the I2S subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) |
||||
#define HAL_USE_I2S FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the ICU subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) |
||||
#define HAL_USE_ICU FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the MAC subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) |
||||
#define HAL_USE_MAC FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the MMC_SPI subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) |
||||
#define HAL_USE_MMC_SPI FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the PWM subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) |
||||
#define HAL_USE_PWM FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the RTC subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) |
||||
#define HAL_USE_RTC FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the SDC subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) |
||||
#define HAL_USE_SDC FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the SERIAL subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) |
||||
#define HAL_USE_SERIAL FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the SERIAL over USB subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) |
||||
#define HAL_USE_SERIAL_USB TRUE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the SPI subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) |
||||
#define HAL_USE_SPI FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the UART subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) |
||||
#define HAL_USE_UART FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the USB subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) |
||||
#define HAL_USE_USB TRUE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the WDG subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) |
||||
#define HAL_USE_WDG FALSE |
||||
#endif |
||||
|
||||
/*===========================================================================*/ |
||||
/* ADC driver related settings. */ |
||||
/*===========================================================================*/ |
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs. |
||||
* @note Disabling this option saves both code and data space. |
||||
*/ |
||||
#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) |
||||
#define ADC_USE_WAIT TRUE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. |
||||
* @note Disabling this option saves both code and data space. |
||||
*/ |
||||
#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) |
||||
#define ADC_USE_MUTUAL_EXCLUSION TRUE |
||||
#endif |
||||
|
||||
/*===========================================================================*/ |
||||
/* CAN driver related settings. */ |
||||
/*===========================================================================*/ |
||||
|
||||
/**
|
||||
* @brief Sleep mode related APIs inclusion switch. |
||||
*/ |
||||
#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) |
||||
#define CAN_USE_SLEEP_MODE TRUE |
||||
#endif |
||||
|
||||
/*===========================================================================*/ |
||||
/* I2C driver related settings. */ |
||||
/*===========================================================================*/ |
||||
|
||||
/**
|
||||
* @brief Enables the mutual exclusion APIs on the I2C bus. |
||||
*/ |
||||
#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) |
||||
#define I2C_USE_MUTUAL_EXCLUSION TRUE |
||||
#endif |
||||
|
||||
/*===========================================================================*/ |
||||
/* MAC driver related settings. */ |
||||
/*===========================================================================*/ |
||||
|
||||
/**
|
||||
* @brief Enables an event sources for incoming packets. |
||||
*/ |
||||
#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) |
||||
#define MAC_USE_ZERO_COPY FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables an event sources for incoming packets. |
||||
*/ |
||||
#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) |
||||
#define MAC_USE_EVENTS TRUE |
||||
#endif |
||||
|
||||
/*===========================================================================*/ |
||||
/* MMC_SPI driver related settings. */ |
||||
/*===========================================================================*/ |
||||
|
||||
/**
|
||||
* @brief Delays insertions. |
||||
* @details If enabled this options inserts delays into the MMC waiting |
||||
* routines releasing some extra CPU time for the threads with |
||||
* lower priority, this may slow down the driver a bit however. |
||||
* This option is recommended also if the SPI driver does not |
||||
* use a DMA channel and heavily loads the CPU. |
||||
*/ |
||||
#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) |
||||
#define MMC_NICE_WAITING TRUE |
||||
#endif |
||||
|
||||
/*===========================================================================*/ |
||||
/* SDC driver related settings. */ |
||||
/*===========================================================================*/ |
||||
|
||||
/**
|
||||
* @brief Number of initialization attempts before rejecting the card. |
||||
* @note Attempts are performed at 10mS intervals. |
||||
*/ |
||||
#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) |
||||
#define SDC_INIT_RETRY 100 |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Include support for MMC cards. |
||||
* @note MMC support is not yet implemented so this option must be kept |
||||
* at @p FALSE. |
||||
*/ |
||||
#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) |
||||
#define SDC_MMC_SUPPORT FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Delays insertions. |
||||
* @details If enabled this options inserts delays into the MMC waiting |
||||
* routines releasing some extra CPU time for the threads with |
||||
* lower priority, this may slow down the driver a bit however. |
||||
*/ |
||||
#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) |
||||
#define SDC_NICE_WAITING TRUE |
||||
#endif |
||||
|
||||
/*===========================================================================*/ |
||||
/* SERIAL driver related settings. */ |
||||
/*===========================================================================*/ |
||||
|
||||
/**
|
||||
* @brief Default bit rate. |
||||
* @details Configuration parameter, this is the baud rate selected for the |
||||
* default configuration. |
||||
*/ |
||||
#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) |
||||
#define SERIAL_DEFAULT_BITRATE 38400 |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Serial buffers size. |
||||
* @details Configuration parameter, you can change the depth of the queue |
||||
* buffers depending on the requirements of your application. |
||||
* @note The default is 64 bytes for both the transmission and receive |
||||
* buffers. |
||||
*/ |
||||
#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) |
||||
#define SERIAL_BUFFERS_SIZE 16 |
||||
#endif |
||||
|
||||
/*===========================================================================*/ |
||||
/* SERIAL_USB driver related setting. */ |
||||
/*===========================================================================*/ |
||||
|
||||
/**
|
||||
* @brief Serial over USB buffers size. |
||||
* @details Configuration parameter, the buffer size must be a multiple of |
||||
* the USB data endpoint maximum packet size. |
||||
* @note The default is 64 bytes for both the transmission and receive |
||||
* buffers. |
||||
*/ |
||||
#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) |
||||
#define SERIAL_USB_BUFFERS_SIZE 256 |
||||
#endif |
||||
|
||||
/*===========================================================================*/ |
||||
/* SPI driver related settings. */ |
||||
/*===========================================================================*/ |
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs. |
||||
* @note Disabling this option saves both code and data space. |
||||
*/ |
||||
#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) |
||||
#define SPI_USE_WAIT TRUE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. |
||||
* @note Disabling this option saves both code and data space. |
||||
*/ |
||||
#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) |
||||
#define SPI_USE_MUTUAL_EXCLUSION TRUE |
||||
#endif |
||||
|
||||
/*===========================================================================*/ |
||||
/* USB driver related settings. */ |
||||
/*===========================================================================*/ |
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs. |
||||
* @note Disabling this option saves both code and data space. |
||||
*/ |
||||
#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) |
||||
#define USB_USE_WAIT TRUE |
||||
#endif |
||||
|
||||
#endif /* _HALCONF_H_ */ |
||||
|
||||
/** @} */ |
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio |
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License"); |
||||
you may not use this file except in compliance with the License. |
||||
You may obtain a copy of the License at |
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software |
||||
distributed under the License is distributed on an "AS IS" BASIS, |
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
||||
See the License for the specific language governing permissions and |
||||
limitations under the License. |
||||
*/ |
||||
|
||||
/**
|
||||
* @file templates/halconf.h |
||||
* @brief HAL configuration header. |
||||
* @details HAL configuration file, this file allows to enable or disable the |
||||
* various device drivers from your application. You may also use |
||||
* this file in order to override the device drivers default settings. |
||||
* |
||||
* @addtogroup HAL_CONF |
||||
* @{ |
||||
*/ |
||||
|
||||
#ifndef _HALCONF_H_ |
||||
#define _HALCONF_H_ |
||||
|
||||
#include "mcuconf.h" |
||||
|
||||
/**
|
||||
* @brief Enables the PAL subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) |
||||
#define HAL_USE_PAL TRUE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the ADC subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) |
||||
#define HAL_USE_ADC FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the CAN subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) |
||||
#define HAL_USE_CAN FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the DAC subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) |
||||
#define HAL_USE_DAC FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the EXT subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) |
||||
#define HAL_USE_EXT FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the GPT subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) |
||||
#define HAL_USE_GPT FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the I2C subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) |
||||
#define HAL_USE_I2C FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the I2S subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) |
||||
#define HAL_USE_I2S FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the ICU subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) |
||||
#define HAL_USE_ICU FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the MAC subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) |
||||
#define HAL_USE_MAC FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the MMC_SPI subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) |
||||
#define HAL_USE_MMC_SPI FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the PWM subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) |
||||
#define HAL_USE_PWM FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the RTC subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) |
||||
#define HAL_USE_RTC FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the SDC subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) |
||||
#define HAL_USE_SDC FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the SERIAL subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) |
||||
#define HAL_USE_SERIAL FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the SERIAL over USB subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) |
||||
#define HAL_USE_SERIAL_USB TRUE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the SPI subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) |
||||
#define HAL_USE_SPI FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the UART subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) |
||||
#define HAL_USE_UART FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the USB subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) |
||||
#define HAL_USE_USB TRUE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the WDG subsystem. |
||||
*/ |
||||
#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) |
||||
#define HAL_USE_WDG FALSE |
||||
#endif |
||||
|
||||
/*===========================================================================*/ |
||||
/* ADC driver related settings. */ |
||||
/*===========================================================================*/ |
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs. |
||||
* @note Disabling this option saves both code and data space. |
||||
*/ |
||||
#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) |
||||
#define ADC_USE_WAIT TRUE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. |
||||
* @note Disabling this option saves both code and data space. |
||||
*/ |
||||
#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) |
||||
#define ADC_USE_MUTUAL_EXCLUSION TRUE |
||||
#endif |
||||
|
||||
/*===========================================================================*/ |
||||
/* CAN driver related settings. */ |
||||
/*===========================================================================*/ |
||||
|
||||
/**
|
||||
* @brief Sleep mode related APIs inclusion switch. |
||||
*/ |
||||
#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) |
||||
#define CAN_USE_SLEEP_MODE TRUE |
||||
#endif |
||||
|
||||
/*===========================================================================*/ |
||||
/* I2C driver related settings. */ |
||||
/*===========================================================================*/ |
||||
|
||||
/**
|
||||
* @brief Enables the mutual exclusion APIs on the I2C bus. |
||||
*/ |
||||
#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) |
||||
#define I2C_USE_MUTUAL_EXCLUSION TRUE |
||||
#endif |
||||
|
||||
/*===========================================================================*/ |
||||
/* MAC driver related settings. */ |
||||
/*===========================================================================*/ |
||||
|
||||
/**
|
||||
* @brief Enables an event sources for incoming packets. |
||||
*/ |
||||
#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) |
||||
#define MAC_USE_ZERO_COPY FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables an event sources for incoming packets. |
||||
*/ |
||||
#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) |
||||
#define MAC_USE_EVENTS TRUE |
||||
#endif |
||||
|
||||
/*===========================================================================*/ |
||||
/* MMC_SPI driver related settings. */ |
||||
/*===========================================================================*/ |
||||
|
||||
/**
|
||||
* @brief Delays insertions. |
||||
* @details If enabled this options inserts delays into the MMC waiting |
||||
* routines releasing some extra CPU time for the threads with |
||||
* lower priority, this may slow down the driver a bit however. |
||||
* This option is recommended also if the SPI driver does not |
||||
* use a DMA channel and heavily loads the CPU. |
||||
*/ |
||||
#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) |
||||
#define MMC_NICE_WAITING TRUE |
||||
#endif |
||||
|
||||
/*===========================================================================*/ |
||||
/* SDC driver related settings. */ |
||||
/*===========================================================================*/ |
||||
|
||||
/**
|
||||
* @brief Number of initialization attempts before rejecting the card. |
||||
* @note Attempts are performed at 10mS intervals. |
||||
*/ |
||||
#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) |
||||
#define SDC_INIT_RETRY 100 |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Include support for MMC cards. |
||||
* @note MMC support is not yet implemented so this option must be kept |
||||
* at @p FALSE. |
||||
*/ |
||||
#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) |
||||
#define SDC_MMC_SUPPORT FALSE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Delays insertions. |
||||
* @details If enabled this options inserts delays into the MMC waiting |
||||
* routines releasing some extra CPU time for the threads with |
||||
* lower priority, this may slow down the driver a bit however. |
||||
*/ |
||||
#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) |
||||
#define SDC_NICE_WAITING TRUE |
||||
#endif |
||||
|
||||
/*===========================================================================*/ |
||||
/* SERIAL driver related settings. */ |
||||
/*===========================================================================*/ |
||||
|
||||
/**
|
||||
* @brief Default bit rate. |
||||
* @details Configuration parameter, this is the baud rate selected for the |
||||
* default configuration. |
||||
*/ |
||||
#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) |
||||
#define SERIAL_DEFAULT_BITRATE 38400 |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Serial buffers size. |
||||
* @details Configuration parameter, you can change the depth of the queue |
||||
* buffers depending on the requirements of your application. |
||||
* @note The default is 64 bytes for both the transmission and receive |
||||
* buffers. |
||||
*/ |
||||
#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) |
||||
#define SERIAL_BUFFERS_SIZE 16 |
||||
#endif |
||||
|
||||
/*===========================================================================*/ |
||||
/* SERIAL_USB driver related setting. */ |
||||
/*===========================================================================*/ |
||||
|
||||
/**
|
||||
* @brief Serial over USB buffers size. |
||||
* @details Configuration parameter, the buffer size must be a multiple of |
||||
* the USB data endpoint maximum packet size. |
||||
* @note The default is 64 bytes for both the transmission and receive |
||||
* buffers. |
||||
*/ |
||||
#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) |
||||
#define SERIAL_USB_BUFFERS_SIZE 256 |
||||
#endif |
||||
|
||||
/*===========================================================================*/ |
||||
/* SPI driver related settings. */ |
||||
/*===========================================================================*/ |
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs. |
||||
* @note Disabling this option saves both code and data space. |
||||
*/ |
||||
#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) |
||||
#define SPI_USE_WAIT TRUE |
||||
#endif |
||||
|
||||
/**
|
||||
* @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. |
||||
* @note Disabling this option saves both code and data space. |
||||
*/ |
||||
#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) |
||||
#define SPI_USE_MUTUAL_EXCLUSION TRUE |
||||
#endif |
||||
|
||||
/*===========================================================================*/ |
||||
/* USB driver related settings. */ |
||||
/*===========================================================================*/ |
||||
|
||||
/**
|
||||
* @brief Enables synchronous APIs. |
||||
* @note Disabling this option saves both code and data space. |
||||
*/ |
||||
#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) |
||||
#define USB_USE_WAIT TRUE |
||||
#endif |
||||
|
||||
#endif /* _HALCONF_H_ */ |
||||
|
||||
/** @} */ |
||||
@ -1,4 +1,4 @@ |
||||
#include "infinity_chibios.h" |
||||
#include "infinity60.h" |
||||
|
||||
const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = { |
||||
/* Layer 0: Default Layer
|
||||
@ -1,4 +1,4 @@ |
||||
#include "infinity_chibios.h" |
||||
#include "infinity60.h" |
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { |
||||
/* Layer 0: Default Layer
|
||||
@ -1,4 +1,4 @@ |
||||
#include "infinity_chibios.h" |
||||
#include "infinity60.h" |
||||
|
||||
const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = { |
||||
/* Layer 0: Default Layer
|
||||
@ -1,55 +1,55 @@ |
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio |
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License"); |
||||
you may not use this file except in compliance with the License. |
||||
You may obtain a copy of the License at |
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software |
||||
distributed under the License is distributed on an "AS IS" BASIS, |
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
||||
See the License for the specific language governing permissions and |
||||
limitations under the License. |
||||
*/ |
||||
|
||||
#ifndef _MCUCONF_H_ |
||||
#define _MCUCONF_H_ |
||||
|
||||
#define K20x_MCUCONF |
||||
|
||||
/*
|
||||
* HAL driver system settings. |
||||
*/ |
||||
|
||||
/* Select the MCU clocking mode below by enabling the appropriate block. */ |
||||
|
||||
#define KINETIS_NO_INIT FALSE |
||||
|
||||
/* FEI mode - 48 MHz with internal 32.768 kHz crystal */ |
||||
#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI |
||||
#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ |
||||
#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ |
||||
#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ |
||||
#define KINETIS_CLKDIV1_OUTDIV1 1 |
||||
#define KINETIS_CLKDIV1_OUTDIV2 1 |
||||
#define KINETIS_CLKDIV1_OUTDIV4 2 |
||||
#define KINETIS_BUSCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY |
||||
#define KINETIS_FLASHCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY/2 |
||||
|
||||
/*
|
||||
* SERIAL driver system settings. |
||||
*/ |
||||
#define KINETIS_SERIAL_USE_UART0 TRUE |
||||
|
||||
/*
|
||||
* USB driver settings |
||||
*/ |
||||
#define KINETIS_USB_USE_USB0 TRUE |
||||
/* Need to redefine this, since the default is for K20x */ |
||||
/* This is for Teensy LC; you should comment it out (or change to 5)
|
||||
* for Teensy 3.x */ |
||||
#define KINETIS_USB_USB0_IRQ_PRIORITY 2 |
||||
|
||||
#endif /* _MCUCONF_H_ */ |
||||
/*
|
||||
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio |
||||
|
||||
Licensed under the Apache License, Version 2.0 (the "License"); |
||||
you may not use this file except in compliance with the License. |
||||
You may obtain a copy of the License at |
||||
|
||||
http://www.apache.org/licenses/LICENSE-2.0
|
||||
|
||||
Unless required by applicable law or agreed to in writing, software |
||||
distributed under the License is distributed on an "AS IS" BASIS, |
||||
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
||||
See the License for the specific language governing permissions and |
||||
limitations under the License. |
||||
*/ |
||||
|
||||
#ifndef _MCUCONF_H_ |
||||
#define _MCUCONF_H_ |
||||
|
||||
#define K20x_MCUCONF |
||||
|
||||
/*
|
||||
* HAL driver system settings. |
||||
*/ |
||||
|
||||
/* Select the MCU clocking mode below by enabling the appropriate block. */ |
||||
|
||||
#define KINETIS_NO_INIT FALSE |
||||
|
||||
/* FEI mode - 48 MHz with internal 32.768 kHz crystal */ |
||||
#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI |
||||
#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ |
||||
#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ |
||||
#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ |
||||
#define KINETIS_CLKDIV1_OUTDIV1 1 |
||||
#define KINETIS_CLKDIV1_OUTDIV2 1 |
||||
#define KINETIS_CLKDIV1_OUTDIV4 2 |
||||
#define KINETIS_BUSCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY |
||||
#define KINETIS_FLASHCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY/2 |
||||
|
||||
/*
|
||||
* SERIAL driver system settings. |
||||
*/ |
||||
#define KINETIS_SERIAL_USE_UART0 TRUE |
||||
|
||||
/*
|
||||
* USB driver settings |
||||
*/ |
||||
#define KINETIS_USB_USE_USB0 TRUE |
||||
/* Need to redefine this, since the default is for K20x */ |
||||
/* This is for Teensy LC; you should comment it out (or change to 5)
|
||||
* for Teensy 3.x */ |
||||
#define KINETIS_USB_USB0_IRQ_PRIORITY 2 |
||||
|
||||
#endif /* _MCUCONF_H_ */ |
||||
@ -0,0 +1,29 @@ |
||||
Infinity 60% keyboard firmware |
||||
====================== |
||||
|
||||
## Quantum MK Firmware |
||||
|
||||
For the full Quantum feature list, see [the parent readme](/). |
||||
|
||||
## Keymaps |
||||
|
||||
Several versions of keymaps are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. |
||||
|
||||
Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/` |
||||
|
||||
|
||||
## Compiling |
||||
|
||||
Download or clone the whole firmware and navigate to the keyboards/infinity60 folder. Once your dev env is setup, you'll be able to use the `make` command to both compile your keymap and flash it to your keyboard. |
||||
|
||||
To just compile, which generates the output files in the `.build` folder at the root of the repository, run `make keymap`, where keymap is the name of the keymap that you want to compile. |
||||
|
||||
## Flashing |
||||
|
||||
To flash the firmware to the keyboard |
||||
|
||||
1. First press the flash button on the bottom of the keyboard. If you already have a flah button mapped in a keyboard layout running on the keyboard, you can also use that. |
||||
2. Then run `make keymap-dfu-util`, where keymap is the name of the keymap you want to flash. On Linux based operating systems you might need to run the comamnd as root, for example `sudo make keymap-dfu-util` on Ubuntu. |
||||
|
||||
**Tip** `make keymap-dfu-util` will also compile the keymap if needed, so you can skip the compilation step if you want to. |
||||
|
||||
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in new issue