Set proper AVR part for USBasp avrdude flashing (#7552)

* Set proper AVR part for USBasp avrdude flashing

* Remove `PROGRAM_CMD` stuff from rules.mk as they should not be needed anymore

* Missed the Plaid readme

* Remove PROGRAM_CMD from Mysterium

keyboards/coseyfannitutti/discipad/rules.mk

@@ -11,14 +11,9 @@ MCU = atmega328p
 #   ATmega328P   USBasp
 BOOTLOADER = USBasp
 
-# Flash program via avrdude, but default command is not suitable.
-# You can use coseyfannitutti/discipad:default:program
-PROGRAM_CMD = avrdude -c usbasp -p m328p -U flash:w:$(BUILD_DIR)/$(TARGET).hex
-
 # disable debug code
 OPT_DEFS = -DDEBUG_LEVEL=0
 
-
 # Build Options
 #   change yes to no to disable
 #

keyboards/coseyfannitutti/discipline/readme.md

@@ -12,7 +12,7 @@ Make example for this keyboard (after setting up your build environment):
 
     make coseyfannitutti/discipline:default
 
-Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
+Flashing example for this keyboard:
 
     make coseyfannitutti/discipline:default:flash
 

keyboards/coseyfannitutti/discipline/rules.mk

@@ -14,10 +14,6 @@ F_CPU = 16000000
 #   ATmega328P   USBasp
 BOOTLOADER = USBasp
 
-# Flash program via avrdude, but default command is not suitable.
-# You can use plaid:default:program
-PROGRAM_CMD = avrdude -c usbasp -p m32 -U flash:w:$(BUILD_DIR)/$(TARGET).hex
-
 # disable debug code
 OPT_DEFS = -DDEBUG_LEVEL=0
 

keyboards/coseyfannitutti/mysterium/rules.mk

@@ -14,10 +14,6 @@ F_USB = 16000000
 #   ATmega328P   USBasp
 BOOTLOADER = USBasp
 
-# Flash program via avrdude, but default command is not suitable.
-# You can use coseyfannitutti/discipline:default:program
-PROGRAM_CMD = avrdude -c usbasp -p m32 -U flash:w:$(BUILD_DIR)/$(TARGET).hex
-
 # disable debug code
 OPT_DEFS = -DDEBUG_LEVEL=0
 

keyboards/gingham/readme.md

@@ -9,11 +9,12 @@ Hardware Supported: ATMEGA328p with vusb [PCB](https://github.com/yiancar/gingha
 Hardware Availability: https://yiancar-designs.com/, https://novelkeys.xyz, https://mechboards.co.uk/  
 
 Make example for this keyboard (after setting up your build environment):
+
     make gingham:default
 
-Flash firmware:
+Flashing example for this keyboard:
-    // In bootloader mode
+
-    make gingham:default:program
+    make gingham:default:flash
 
 Bootloader:
 use usbasploader HSGW's my repository.

keyboards/gingham/rules.mk

@@ -14,10 +14,6 @@ MCU = atmega328p
 #   ATmega328P   USBasp
 BOOTLOADER = USBasp
 
-# Flash program via avrdude, but default command is not suitable.
-# You can use plaid:default:program
-PROGRAM_CMD = avrdude -c usbasp -p m328p -U flash:w:$(BUILD_DIR)/$(TARGET).hex
-
 # disable debug code
 OPT_DEFS = -DDEBUG_LEVEL=0
 

keyboards/handwired/hnah40/readme.md

@@ -10,7 +10,11 @@ Hardware Availability: https://github.com/vuhopkep/PCB/tree/master/Hnah40-Atmega
 
 Make example for this keyboard (after setting up your build environment):
 
-    make handwired/hnah40:default:program
+    make handwired/hnah40:default
+
+Flashing example for this keyboard:
+
+    make handwired/hnah40:default:flash
 
 ## Bootloader 
 use usbasploader from hsgw.

keyboards/handwired/hnah40/rules.mk

@@ -11,15 +11,9 @@ MCU = atmega328p
 #   ATmega328P   USBasp
 BOOTLOADER = USBasp
 
-# Flash program via avrdude, but default command is not suitable.
-# You can use hnah40:default:program
-PROGRAM_CMD = avrdude -c usbasp -p m328p -U flash:w:$(BUILD_DIR)/$(TARGET).hex
-
-
 # disable debug code
 OPT_DEFS = -DDEBUG_LEVEL=0
 
-
 # Build Options
 #   change yes to no to disable
 #

keyboards/plaid/readme.md

@@ -11,9 +11,9 @@ Hardware Availability: Group buy in r/mk
 Make example for this keyboard (after setting up your build environment):
     make plaid:default
 
-Flash firmware:
+Flashing example for this keyboard:
-    // In bootloader mode
+
-    make plaid:default:program
+    make plaid:default:flash
 
 ## Bootloader
 use usbasploader in my repository.

keyboards/plaid/rules.mk

@@ -11,15 +11,9 @@ MCU = atmega328p
 #   ATmega328P   USBasp
 BOOTLOADER = USBasp
 
-# Flash program via avrdude, but default command is not suitable.
-# You can use plaid:default:program
-PROGRAM_CMD = avrdude -c usbasp -p m328p -U flash:w:$(BUILD_DIR)/$(TARGET).hex
-
-
 # disable debug code
 OPT_DEFS = -DDEBUG_LEVEL=0
 
-
 # Build Options
 #   change yes to no to disable
 #

quantum/mcu_selection.mk

@@ -75,6 +75,9 @@ ifneq (,$(filter $(MCU),atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 a
 endif
 
 ifneq (,$(filter $(MCU),atmega32a))
+  # MCU name for avrdude
+  AVRDUDE_MCU = m32
+
   PROTOCOL = VUSB
 
   # Processor frequency.
@@ -90,6 +93,9 @@ ifneq (,$(filter $(MCU),atmega32a))
 endif
 
 ifneq (,$(filter $(MCU),atmega328p))
+  # MCU name for avrdude
+  AVRDUDE_MCU = m328p
+
   PROTOCOL = VUSB
 
   # Processor frequency.

tmk_core/avr.mk

@@ -240,7 +240,7 @@ avrdude-split-right: $(BUILD_DIR)/$(TARGET).hex check-size cpfirmware
 	$(call EXEC_AVRDUDE,eeprom-righthand.eep)
 
 define EXEC_USBASP
-	avrdude -p $(MCU) -c usbasp -U flash:w:$(BUILD_DIR)/$(TARGET).hex
+	avrdude -p $(AVRDUDE_MCU) -c usbasp -U flash:w:$(BUILD_DIR)/$(TARGET).hex
 endef
 
 usbasp: $(BUILD_DIR)/$(TARGET).hex check-size cpfirmware