Added Tanuki Keyboard (#2894)
* added tanuki * updated definitions to new qmk standard * complying with suggestions made by drashna * update rulesfile * used qmk template for readme fileplanck_light_rev2
Pim Ostendorf
7 years ago
committed by
Drashna Jaelre
parent
824e48f294
commit
c9108f4b37
@ -0,0 +1,82 @@ |
|||||||
|
/*
|
||||||
|
Copyright 2015 Jun Wako <wakojun@gmail.com> |
||||||
|
|
||||||
|
This program is free software: you can redistribute it and/or modify |
||||||
|
it under the terms of the GNU General Public License as published by |
||||||
|
the Free Software Foundation, either version 2 of the License, or |
||||||
|
(at your option) any later version. |
||||||
|
|
||||||
|
This program is distributed in the hope that it will be useful, |
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||||
|
GNU General Public License for more details. |
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License |
||||||
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/ |
||||||
|
|
||||||
|
#ifndef CONFIG_H |
||||||
|
#define CONFIG_H |
||||||
|
|
||||||
|
#include "config_common.h" |
||||||
|
|
||||||
|
/* USB Device descriptor parameter */ |
||||||
|
#define VENDOR_ID 0xFEED |
||||||
|
#define PRODUCT_ID 0x6464 |
||||||
|
#define DEVICE_VER 0x0001 |
||||||
|
#define MANUFACTURER Seth |
||||||
|
#define PRODUCT Tanuki PCB version |
||||||
|
#define DESCRIPTION Handwired 40% keyboard |
||||||
|
|
||||||
|
/* key matrix size */ |
||||||
|
#define MATRIX_ROWS 4 |
||||||
|
#define MATRIX_COLS 11 |
||||||
|
|
||||||
|
#define MATRIX_COL_PINS { B3 , B2 , B6 , B5 , B4 , E6 , D7 , C6 , F4 , F5 , F6 } |
||||||
|
#define MATRIX_ROW_PINS { F7 , B1 , D4 , D0 } |
||||||
|
#define UNUSED_PINS |
||||||
|
|
||||||
|
/* define if matrix has ghost */ |
||||||
|
//#define MATRIX_HAS_GHOST
|
||||||
|
|
||||||
|
/* Set 0 if debouncing isn't needed */ |
||||||
|
#define DEBOUNCE 5 |
||||||
|
|
||||||
|
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ |
||||||
|
#define LOCKING_SUPPORT_ENABLE |
||||||
|
/* Locking resynchronize hack */ |
||||||
|
#define LOCKING_RESYNC_ENABLE |
||||||
|
|
||||||
|
/* key combination for command */ |
||||||
|
#define IS_COMMAND() ( \ |
||||||
|
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||||
|
) |
||||||
|
|
||||||
|
#define RGB_DI_PIN D1 |
||||||
|
#define RGBLIGHT_ANIMATIONS |
||||||
|
#define RGBLED_NUM 5 |
||||||
|
#define RGBLIGHT_HUE_STEP 10 |
||||||
|
#define RGBLIGHT_SAT_STEP 17 |
||||||
|
#define RGBLIGHT_VAL_STEP 17 |
||||||
|
|
||||||
|
|
||||||
|
#define TAPPING_TERM 200 |
||||||
|
/*
|
||||||
|
* Feature disable options |
||||||
|
* These options are also useful to firmware size reduction. |
||||||
|
*/ |
||||||
|
|
||||||
|
/* disable debug print */ |
||||||
|
//#define NO_DEBUG
|
||||||
|
|
||||||
|
/* disable print */ |
||||||
|
//#define NO_PRINT
|
||||||
|
|
||||||
|
/* disable action features */ |
||||||
|
//#define NO_ACTION_LAYER
|
||||||
|
//#define NO_ACTION_TAPPING
|
||||||
|
//#define NO_ACTION_ONESHOT
|
||||||
|
//#define NO_ACTION_MACRO
|
||||||
|
//#define NO_ACTION_FUNCTION
|
||||||
|
|
||||||
|
#endif |
||||||
@ -0,0 +1,141 @@ |
|||||||
|
#include QMK_KEYBOARD_H |
||||||
|
#include "rgblight.h" |
||||||
|
|
||||||
|
//Layer definitions
|
||||||
|
#define _BL 0 |
||||||
|
#define _DL 1 |
||||||
|
#define _UL 2 |
||||||
|
#define _GL 3 |
||||||
|
#define _BK 4 |
||||||
|
|
||||||
|
|
||||||
|
//other variables
|
||||||
|
int mCalled = 0; |
||||||
|
bool blockToggle = false; |
||||||
|
bool lRGB = true; |
||||||
|
|
||||||
|
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { |
||||||
|
|
||||||
|
[_BL] = LAYOUT( |
||||||
|
KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \
|
||||||
|
KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, TG(_GL), \
|
||||||
|
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_QUOT, KC_SLSH, KC_ENT, \
|
||||||
|
KC_TAB, KC_ESC, KC_LCTL, KC_LALT, KC_COMMA, LT(_DL,KC_SPC), LT(_UL,KC_SPC), KC_DOT, KC_LGUI), |
||||||
|
|
||||||
|
[_DL] = LAYOUT( |
||||||
|
KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,\
|
||||||
|
KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_TRNS,\
|
||||||
|
KC_TRNS, KC_PSCR, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||||
|
KC_TRNS, KC_F1, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), |
||||||
|
|
||||||
|
[_UL] = LAYOUT( |
||||||
|
KC_LBRC, KC_RBRC, KC_LCBR, KC_RCBR, KC_PIPE, KC_BSLS, KC_PLUS, KC_UNDS, KC_MINS, KC_EQL, KC_DEL,\
|
||||||
|
KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_TRNS, \
|
||||||
|
KC_TRNS, KC_FN0, RGB_TOG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_SAD, RGB_VAD, KC_TRNS, KC_TRNS, \
|
||||||
|
KC_TRNS, KC_GRV, KC_TRNS, RGB_MOD, RGB_HUI, KC_TRNS, KC_TRNS, RGB_SAI, RGB_VAI), |
||||||
|
|
||||||
|
[_GL] = LAYOUT( |
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, \
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, \
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), |
||||||
|
|
||||||
|
[_BK] = LAYOUT( |
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,\
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_NO, KC_TRNS, KC_TRNS, \
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_NO, KC_TRNS, KC_FN1, KC_NO, KC_NO), |
||||||
|
|
||||||
|
}; |
||||||
|
|
||||||
|
|
||||||
|
//KC_MPLY, KC_VOLU, KC_VOLD, KC_TRNS, KC_TRNS, KC_MNXT, KC_MPRV
|
||||||
|
//function to toggle the interactive rgb variable
|
||||||
|
bool toggleLayerRGB(void){ |
||||||
|
if(lRGB == true){ |
||||||
|
return false; |
||||||
|
} |
||||||
|
else{ |
||||||
|
return true; |
||||||
|
} |
||||||
|
} |
||||||
|
|
||||||
|
void matrix_init_user(void){ |
||||||
|
rgblight_enable(); |
||||||
|
rgblight_mode(1); |
||||||
|
rgblight_sethsv(0,10,255); |
||||||
|
} |
||||||
|
|
||||||
|
//check for layer and if there was a keypress change underglow lighting
|
||||||
|
void matrix_scan_kb(void){ |
||||||
|
if(lRGB == true) |
||||||
|
{ |
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
//base layer
|
||||||
|
if(layer_state == 0x00000000 && mCalled == 1 ){ |
||||||
|
rgblight_sethsv(0,10,255); |
||||||
|
mCalled = 0; |
||||||
|
} |
||||||
|
|
||||||
|
//down layer
|
||||||
|
else if(layer_state == 0x00000002 && mCalled == 1){ |
||||||
|
rgblight_sethsv(160,255,255); |
||||||
|
mCalled = 0; |
||||||
|
} |
||||||
|
|
||||||
|
|
||||||
|
//up layer with rgb access blocked
|
||||||
|
else if(layer_state == 0x00000004 && mCalled == 1 && lRGB == true){ |
||||||
|
//blockToggle = true;
|
||||||
|
layer_state = 0x00000014; |
||||||
|
rgblight_sethsv(180,255,255); |
||||||
|
mCalled = 0; |
||||||
|
} |
||||||
|
|
||||||
|
//arrow cluster layer
|
||||||
|
else if(layer_state == 0x00000008 && mCalled == 1){ |
||||||
|
rgblight_sethsv(0,180,255); |
||||||
|
mCalled = 0; |
||||||
|
} |
||||||
|
|
||||||
|
//if on blocked layer and the spacebar has been released reset to baselayer and set colours to white
|
||||||
|
else if(layer_state == 0x00000014 && blockToggle == true ) |
||||||
|
{ |
||||||
|
blockToggle = false; |
||||||
|
layer_state = 0x00000000; |
||||||
|
rgblight_sethsv(0,10,255); |
||||||
|
} |
||||||
|
|
||||||
|
} |
||||||
|
} |
||||||
|
|
||||||
|
//set mCalled to 1 when a button is pressed to make sure the leds aren't continuesly updated.
|
||||||
|
bool process_record_user (uint16_t keycode, keyrecord_t *record) { |
||||||
|
mCalled = 1; |
||||||
|
|
||||||
|
//uncommenting the line below causes the lights to flicker when typing on the keyboard.
|
||||||
|
//rgblight_sethsv(0,255,0);
|
||||||
|
|
||||||
|
if(keycode == KC_FN0 && record->event.pressed){ |
||||||
|
//set the toggle and make sure to set the colour back to white
|
||||||
|
lRGB = toggleLayerRGB(); |
||||||
|
rgblight_enable(); |
||||||
|
rgblight_mode(1); |
||||||
|
rgblight_sethsv(0,255,255); |
||||||
|
layer_state =0x00000000; |
||||||
|
|
||||||
|
return false; |
||||||
|
} |
||||||
|
|
||||||
|
//check if spacebar is released when on a different layer
|
||||||
|
if(keycode == KC_FN1){ |
||||||
|
if(record ->event.pressed){ |
||||||
|
}else{ |
||||||
|
blockToggle = true; |
||||||
|
} |
||||||
|
} |
||||||
|
|
||||||
|
return true; |
||||||
|
} |
||||||
@ -0,0 +1,15 @@ |
|||||||
|
# Tanuki |
||||||
|
|
||||||
|
 |
||||||
|
|
||||||
|
The QMK firmware for the Tanuki 40% keyboard. The other files needed for construction can be found in the [Tanuki repo](https://github.com/SethSenpai/Tanuki). |
||||||
|
|
||||||
|
Keyboard Maintainer: [SethSenpai](https://github.com/SethSenpai) |
||||||
|
Hardware Supported: Tanuki pcb, pro micro |
||||||
|
Hardware Availability: [Tanuki repo](https://github.com/SethSenpai/Tanuki) |
||||||
|
|
||||||
|
Make example for this keyboard (after setting up your build environment): |
||||||
|
|
||||||
|
make tanuki:default |
||||||
|
|
||||||
|
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. |
||||||
@ -0,0 +1,70 @@ |
|||||||
|
|
||||||
|
|
||||||
|
# MCU name
|
||||||
|
MCU = atmega32u4
|
||||||
|
|
||||||
|
# Processor frequency.
|
||||||
|
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||||
|
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||||
|
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||||
|
# automatically to create a 32-bit value in your source code.
|
||||||
|
#
|
||||||
|
# This will be an integer division of F_USB below, as it is sourced by
|
||||||
|
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||||
|
# does not *change* the processor frequency - it should merely be updated to
|
||||||
|
# reflect the processor speed set externally so that the code can use accurate
|
||||||
|
# software delays.
|
||||||
|
F_CPU = 16000000
|
||||||
|
|
||||||
|
|
||||||
|
#
|
||||||
|
# LUFA specific
|
||||||
|
#
|
||||||
|
# Target architecture (see library "Board Types" documentation).
|
||||||
|
ARCH = AVR8
|
||||||
|
|
||||||
|
# Input clock frequency.
|
||||||
|
# This will define a symbol, F_USB, in all source code files equal to the
|
||||||
|
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||||
|
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||||
|
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||||
|
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||||
|
# at the end, this will be done automatically to create a 32-bit value in your
|
||||||
|
# source code.
|
||||||
|
#
|
||||||
|
# If no clock division is performed on the input clock inside the AVR (via the
|
||||||
|
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||||
|
F_USB = $(F_CPU)
|
||||||
|
|
||||||
|
# Interrupt driven control endpoint task(+60)
|
||||||
|
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||||
|
|
||||||
|
|
||||||
|
# Boot Section Size in *bytes*
|
||||||
|
# Teensy halfKay 512
|
||||||
|
# Teensy++ halfKay 1024
|
||||||
|
# Atmel DFU loader 4096
|
||||||
|
# LUFA bootloader 4096
|
||||||
|
# USBaspLoader 2048
|
||||||
|
BOOTLOADER=caterina
|
||||||
|
|
||||||
|
# Build Options
|
||||||
|
# comment out to disable the options.
|
||||||
|
#
|
||||||
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||||
|
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
||||||
|
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||||
|
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||||
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
|
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
RGBLIGHT_ENABLE =yes # Enable keyboard underlight functionality (+4870)
|
||||||
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality (+1150)
|
||||||
|
MIDI_ENABLE = no # MIDI controls
|
||||||
|
AUDIO_ENABLE = no
|
||||||
|
UNICODE_ENABLE = no # Unicode
|
||||||
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
|
TAP_DANCE_ENABLE = no
|
||||||
|
|
||||||
|
ifndef QUANTUM_DIR |
||||||
|
include ../../Makefile
|
||||||
|
endif |
||||||
@ -0,0 +1,10 @@ |
|||||||
|
#include "tanuki.h" |
||||||
|
#include "rgblight.h" |
||||||
|
#include "config.h" |
||||||
|
#include "rgblight.h" |
||||||
|
|
||||||
|
void matrix_init_kb(void) { |
||||||
|
// put your keyboard start-up code here
|
||||||
|
// runs once when the firmware starts up
|
||||||
|
|
||||||
|
}; |
||||||
@ -0,0 +1,22 @@ |
|||||||
|
#include "quantum.h" |
||||||
|
|
||||||
|
|
||||||
|
// readability
|
||||||
|
#define XXX KC_NO |
||||||
|
|
||||||
|
// The first section contains all of the arguments
|
||||||
|
// The second converts the arguments into a two-dimensional array
|
||||||
|
#define LAYOUT( \ |
||||||
|
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, \
|
||||||
|
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, \
|
||||||
|
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, \
|
||||||
|
k30, k31, k32, k33, k34, k35, k36, k38, k39 \
|
||||||
|
) \
|
||||||
|
{ \
|
||||||
|
{k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a}, \
|
||||||
|
{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a}, \
|
||||||
|
{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a}, \
|
||||||
|
{k30, k31, k32, k33, k34, k35, k36, XXX, k38, k39, XXX} \
|
||||||
|
} |
||||||
|
|
||||||
|
|
||||||
Loading…
Reference in new issue