[Keyboard] AEboards Ext65 rev2 (#9482)
* ext65rev2 initial * open drain change and config * pwm * pwm streams * spi * ws2812 spi * oled * enable sleep * keymap and dissable oled * readd oleds * nooled * led_update_kb revised * update and remove board specific files and add to ext65rev2.c * Update OLED usb status * Update keyboards led state * Layer state set kb * Return state * Update keyboards led state * Update OLED usb status * merge master and merge rev folders * add readme * move board_init to only if OLED is enabled * update readme * update rules.mk * Remove OLED from rules.mk * Update config.h * show AEBoards * Update keyboards/aeboards/ext65/rev2/rules.mkpre-develop-merge-nov20
Xelus22
5 years ago
committed by
GitHub
parent
f1299f3292
commit
c957eed04b
@ -0,0 +1,7 @@ |
|||||||
|
/* Address for jumping to bootloader on STM32 chips. */ |
||||||
|
/* It is chip dependent, the correct number can be looked up here (page 175):
|
||||||
|
* http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
|
||||||
|
* This also requires a patch to chibios: |
||||||
|
* <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch |
||||||
|
*/ |
||||||
|
#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800 |
||||||
@ -0,0 +1,714 @@ |
|||||||
|
/*
|
||||||
|
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio |
||||||
|
|
||||||
|
Licensed under the Apache License, Version 2.0 (the "License"); |
||||||
|
you may not use this file except in compliance with the License. |
||||||
|
You may obtain a copy of the License at |
||||||
|
|
||||||
|
http://www.apache.org/licenses/LICENSE-2.0
|
||||||
|
|
||||||
|
Unless required by applicable law or agreed to in writing, software |
||||||
|
distributed under the License is distributed on an "AS IS" BASIS, |
||||||
|
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
||||||
|
See the License for the specific language governing permissions and |
||||||
|
limitations under the License. |
||||||
|
*/ |
||||||
|
|
||||||
|
/**
|
||||||
|
* @file rt/templates/chconf.h |
||||||
|
* @brief Configuration file template. |
||||||
|
* @details A copy of this file must be placed in each project directory, it |
||||||
|
* contains the application specific kernel settings. |
||||||
|
* |
||||||
|
* @addtogroup config |
||||||
|
* @details Kernel related settings and hooks. |
||||||
|
* @{ |
||||||
|
*/ |
||||||
|
|
||||||
|
#ifndef CHCONF_H |
||||||
|
#define CHCONF_H |
||||||
|
|
||||||
|
#define _CHIBIOS_RT_CONF_ |
||||||
|
#define _CHIBIOS_RT_CONF_VER_6_0_ |
||||||
|
|
||||||
|
/*===========================================================================*/ |
||||||
|
/**
|
||||||
|
* @name System timers settings |
||||||
|
* @{ |
||||||
|
*/ |
||||||
|
/*===========================================================================*/ |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief System time counter resolution. |
||||||
|
* @note Allowed values are 16 or 32 bits. |
||||||
|
*/ |
||||||
|
#if !defined(CH_CFG_ST_RESOLUTION) |
||||||
|
#define CH_CFG_ST_RESOLUTION 32 |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief System tick frequency. |
||||||
|
* @details Frequency of the system timer that drives the system ticks. This |
||||||
|
* setting also defines the system tick time unit. |
||||||
|
*/ |
||||||
|
#if !defined(CH_CFG_ST_FREQUENCY) |
||||||
|
#define CH_CFG_ST_FREQUENCY 10000 |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Time intervals data size. |
||||||
|
* @note Allowed values are 16, 32 or 64 bits. |
||||||
|
*/ |
||||||
|
#if !defined(CH_CFG_INTERVALS_SIZE) |
||||||
|
#define CH_CFG_INTERVALS_SIZE 32 |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Time types data size. |
||||||
|
* @note Allowed values are 16 or 32 bits. |
||||||
|
*/ |
||||||
|
#if !defined(CH_CFG_TIME_TYPES_SIZE) |
||||||
|
#define CH_CFG_TIME_TYPES_SIZE 32 |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Time delta constant for the tick-less mode. |
||||||
|
* @note If this value is zero then the system uses the classic |
||||||
|
* periodic tick. This value represents the minimum number |
||||||
|
* of ticks that is safe to specify in a timeout directive. |
||||||
|
* The value one is not valid, timeouts are rounded up to |
||||||
|
* this value. |
||||||
|
*/ |
||||||
|
#if !defined(CH_CFG_ST_TIMEDELTA) |
||||||
|
#define CH_CFG_ST_TIMEDELTA 2 |
||||||
|
#endif |
||||||
|
|
||||||
|
/** @} */ |
||||||
|
|
||||||
|
/*===========================================================================*/ |
||||||
|
/**
|
||||||
|
* @name Kernel parameters and options |
||||||
|
* @{ |
||||||
|
*/ |
||||||
|
/*===========================================================================*/ |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Round robin interval. |
||||||
|
* @details This constant is the number of system ticks allowed for the |
||||||
|
* threads before preemption occurs. Setting this value to zero |
||||||
|
* disables the preemption for threads with equal priority and the |
||||||
|
* round robin becomes cooperative. Note that higher priority |
||||||
|
* threads can still preempt, the kernel is always preemptive. |
||||||
|
* @note Disabling the round robin preemption makes the kernel more compact |
||||||
|
* and generally faster. |
||||||
|
* @note The round robin preemption is not supported in tickless mode and |
||||||
|
* must be set to zero in that case. |
||||||
|
*/ |
||||||
|
#if !defined(CH_CFG_TIME_QUANTUM) |
||||||
|
#define CH_CFG_TIME_QUANTUM 0 |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Managed RAM size. |
||||||
|
* @details Size of the RAM area to be managed by the OS. If set to zero |
||||||
|
* then the whole available RAM is used. The core memory is made |
||||||
|
* available to the heap allocator and/or can be used directly through |
||||||
|
* the simplified core memory allocator. |
||||||
|
* |
||||||
|
* @note In order to let the OS manage the whole RAM the linker script must |
||||||
|
* provide the @p __heap_base__ and @p __heap_end__ symbols. |
||||||
|
* @note Requires @p CH_CFG_USE_MEMCORE. |
||||||
|
*/ |
||||||
|
#if !defined(CH_CFG_MEMCORE_SIZE) |
||||||
|
#define CH_CFG_MEMCORE_SIZE 0 |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Idle thread automatic spawn suppression. |
||||||
|
* @details When this option is activated the function @p chSysInit() |
||||||
|
* does not spawn the idle thread. The application @p main() |
||||||
|
* function becomes the idle thread and must implement an |
||||||
|
* infinite loop. |
||||||
|
*/ |
||||||
|
#if !defined(CH_CFG_NO_IDLE_THREAD) |
||||||
|
#define CH_CFG_NO_IDLE_THREAD FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/** @} */ |
||||||
|
|
||||||
|
/*===========================================================================*/ |
||||||
|
/**
|
||||||
|
* @name Performance options |
||||||
|
* @{ |
||||||
|
*/ |
||||||
|
/*===========================================================================*/ |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief OS optimization. |
||||||
|
* @details If enabled then time efficient rather than space efficient code |
||||||
|
* is used when two possible implementations exist. |
||||||
|
* |
||||||
|
* @note This is not related to the compiler optimization options. |
||||||
|
* @note The default is @p TRUE. |
||||||
|
*/ |
||||||
|
#if !defined(CH_CFG_OPTIMIZE_SPEED) |
||||||
|
#define CH_CFG_OPTIMIZE_SPEED FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/** @} */ |
||||||
|
|
||||||
|
/*===========================================================================*/ |
||||||
|
/**
|
||||||
|
* @name Subsystem options |
||||||
|
* @{ |
||||||
|
*/ |
||||||
|
/*===========================================================================*/ |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Time Measurement APIs. |
||||||
|
* @details If enabled then the time measurement APIs are included in |
||||||
|
* the kernel. |
||||||
|
* |
||||||
|
* @note The default is @p TRUE. |
||||||
|
*/ |
||||||
|
#if !defined(CH_CFG_USE_TM) |
||||||
|
#define CH_CFG_USE_TM FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Threads registry APIs. |
||||||
|
* @details If enabled then the registry APIs are included in the kernel. |
||||||
|
* |
||||||
|
* @note The default is @p TRUE. |
||||||
|
*/ |
||||||
|
#if !defined(CH_CFG_USE_REGISTRY) |
||||||
|
#define CH_CFG_USE_REGISTRY TRUE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Threads synchronization APIs. |
||||||
|
* @details If enabled then the @p chThdWait() function is included in |
||||||
|
* the kernel. |
||||||
|
* |
||||||
|
* @note The default is @p TRUE. |
||||||
|
*/ |
||||||
|
#if !defined(CH_CFG_USE_WAITEXIT) |
||||||
|
#define CH_CFG_USE_WAITEXIT TRUE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Semaphores APIs. |
||||||
|
* @details If enabled then the Semaphores APIs are included in the kernel. |
||||||
|
* |
||||||
|
* @note The default is @p TRUE. |
||||||
|
*/ |
||||||
|
#if !defined(CH_CFG_USE_SEMAPHORES) |
||||||
|
#define CH_CFG_USE_SEMAPHORES TRUE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Semaphores queuing mode. |
||||||
|
* @details If enabled then the threads are enqueued on semaphores by |
||||||
|
* priority rather than in FIFO order. |
||||||
|
* |
||||||
|
* @note The default is @p FALSE. Enable this if you have special |
||||||
|
* requirements. |
||||||
|
* @note Requires @p CH_CFG_USE_SEMAPHORES. |
||||||
|
*/ |
||||||
|
#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) |
||||||
|
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Mutexes APIs. |
||||||
|
* @details If enabled then the mutexes APIs are included in the kernel. |
||||||
|
* |
||||||
|
* @note The default is @p TRUE. |
||||||
|
*/ |
||||||
|
#if !defined(CH_CFG_USE_MUTEXES) |
||||||
|
#define CH_CFG_USE_MUTEXES TRUE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enables recursive behavior on mutexes. |
||||||
|
* @note Recursive mutexes are heavier and have an increased |
||||||
|
* memory footprint. |
||||||
|
* |
||||||
|
* @note The default is @p FALSE. |
||||||
|
* @note Requires @p CH_CFG_USE_MUTEXES. |
||||||
|
*/ |
||||||
|
#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) |
||||||
|
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Conditional Variables APIs. |
||||||
|
* @details If enabled then the conditional variables APIs are included |
||||||
|
* in the kernel. |
||||||
|
* |
||||||
|
* @note The default is @p TRUE. |
||||||
|
* @note Requires @p CH_CFG_USE_MUTEXES. |
||||||
|
*/ |
||||||
|
#if !defined(CH_CFG_USE_CONDVARS) |
||||||
|
#define CH_CFG_USE_CONDVARS TRUE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Conditional Variables APIs with timeout. |
||||||
|
* @details If enabled then the conditional variables APIs with timeout |
||||||
|
* specification are included in the kernel. |
||||||
|
* |
||||||
|
* @note The default is @p TRUE. |
||||||
|
* @note Requires @p CH_CFG_USE_CONDVARS. |
||||||
|
*/ |
||||||
|
#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) |
||||||
|
#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Events Flags APIs. |
||||||
|
* @details If enabled then the event flags APIs are included in the kernel. |
||||||
|
* |
||||||
|
* @note The default is @p TRUE. |
||||||
|
*/ |
||||||
|
#if !defined(CH_CFG_USE_EVENTS) |
||||||
|
#define CH_CFG_USE_EVENTS TRUE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Events Flags APIs with timeout. |
||||||
|
* @details If enabled then the events APIs with timeout specification |
||||||
|
* are included in the kernel. |
||||||
|
* |
||||||
|
* @note The default is @p TRUE. |
||||||
|
* @note Requires @p CH_CFG_USE_EVENTS. |
||||||
|
*/ |
||||||
|
#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) |
||||||
|
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Synchronous Messages APIs. |
||||||
|
* @details If enabled then the synchronous messages APIs are included |
||||||
|
* in the kernel. |
||||||
|
* |
||||||
|
* @note The default is @p TRUE. |
||||||
|
*/ |
||||||
|
#if !defined(CH_CFG_USE_MESSAGES) |
||||||
|
#define CH_CFG_USE_MESSAGES TRUE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Synchronous Messages queuing mode. |
||||||
|
* @details If enabled then messages are served by priority rather than in |
||||||
|
* FIFO order. |
||||||
|
* |
||||||
|
* @note The default is @p FALSE. Enable this if you have special |
||||||
|
* requirements. |
||||||
|
* @note Requires @p CH_CFG_USE_MESSAGES. |
||||||
|
*/ |
||||||
|
#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) |
||||||
|
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Mailboxes APIs. |
||||||
|
* @details If enabled then the asynchronous messages (mailboxes) APIs are |
||||||
|
* included in the kernel. |
||||||
|
* |
||||||
|
* @note The default is @p TRUE. |
||||||
|
* @note Requires @p CH_CFG_USE_SEMAPHORES. |
||||||
|
*/ |
||||||
|
#if !defined(CH_CFG_USE_MAILBOXES) |
||||||
|
#define CH_CFG_USE_MAILBOXES TRUE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Core Memory Manager APIs. |
||||||
|
* @details If enabled then the core memory manager APIs are included |
||||||
|
* in the kernel. |
||||||
|
* |
||||||
|
* @note The default is @p TRUE. |
||||||
|
*/ |
||||||
|
#if !defined(CH_CFG_USE_MEMCORE) |
||||||
|
#define CH_CFG_USE_MEMCORE FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Heap Allocator APIs. |
||||||
|
* @details If enabled then the memory heap allocator APIs are included |
||||||
|
* in the kernel. |
||||||
|
* |
||||||
|
* @note The default is @p TRUE. |
||||||
|
* @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or |
||||||
|
* @p CH_CFG_USE_SEMAPHORES. |
||||||
|
* @note Mutexes are recommended. |
||||||
|
*/ |
||||||
|
#if !defined(CH_CFG_USE_HEAP) |
||||||
|
#define CH_CFG_USE_HEAP FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Memory Pools Allocator APIs. |
||||||
|
* @details If enabled then the memory pools allocator APIs are included |
||||||
|
* in the kernel. |
||||||
|
* |
||||||
|
* @note The default is @p TRUE. |
||||||
|
*/ |
||||||
|
#if !defined(CH_CFG_USE_MEMPOOLS) |
||||||
|
#define CH_CFG_USE_MEMPOOLS FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Objects FIFOs APIs. |
||||||
|
* @details If enabled then the objects FIFOs APIs are included |
||||||
|
* in the kernel. |
||||||
|
* |
||||||
|
* @note The default is @p TRUE. |
||||||
|
*/ |
||||||
|
#if !defined(CH_CFG_USE_OBJ_FIFOS) |
||||||
|
#define CH_CFG_USE_OBJ_FIFOS FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Pipes APIs. |
||||||
|
* @details If enabled then the pipes APIs are included |
||||||
|
* in the kernel. |
||||||
|
* |
||||||
|
* @note The default is @p TRUE. |
||||||
|
*/ |
||||||
|
#if !defined(CH_CFG_USE_PIPES) |
||||||
|
#define CH_CFG_USE_PIPES FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Dynamic Threads APIs. |
||||||
|
* @details If enabled then the dynamic threads creation APIs are included |
||||||
|
* in the kernel. |
||||||
|
* |
||||||
|
* @note The default is @p TRUE. |
||||||
|
* @note Requires @p CH_CFG_USE_WAITEXIT. |
||||||
|
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. |
||||||
|
*/ |
||||||
|
#if !defined(CH_CFG_USE_DYNAMIC) |
||||||
|
#define CH_CFG_USE_DYNAMIC FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/** @} */ |
||||||
|
|
||||||
|
/*===========================================================================*/ |
||||||
|
/**
|
||||||
|
* @name Objects factory options |
||||||
|
* @{ |
||||||
|
*/ |
||||||
|
/*===========================================================================*/ |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Objects Factory APIs. |
||||||
|
* @details If enabled then the objects factory APIs are included in the |
||||||
|
* kernel. |
||||||
|
* |
||||||
|
* @note The default is @p FALSE. |
||||||
|
*/ |
||||||
|
#if !defined(CH_CFG_USE_FACTORY) |
||||||
|
#define CH_CFG_USE_FACTORY FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Maximum length for object names. |
||||||
|
* @details If the specified length is zero then the name is stored by |
||||||
|
* pointer but this could have unintended side effects. |
||||||
|
*/ |
||||||
|
#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) |
||||||
|
#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enables the registry of generic objects. |
||||||
|
*/ |
||||||
|
#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) |
||||||
|
#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enables factory for generic buffers. |
||||||
|
*/ |
||||||
|
#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) |
||||||
|
#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enables factory for semaphores. |
||||||
|
*/ |
||||||
|
#if !defined(CH_CFG_FACTORY_SEMAPHORES) |
||||||
|
#define CH_CFG_FACTORY_SEMAPHORES FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enables factory for mailboxes. |
||||||
|
*/ |
||||||
|
#if !defined(CH_CFG_FACTORY_MAILBOXES) |
||||||
|
#define CH_CFG_FACTORY_MAILBOXES FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enables factory for objects FIFOs. |
||||||
|
*/ |
||||||
|
#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) |
||||||
|
#define CH_CFG_FACTORY_OBJ_FIFOS FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enables factory for Pipes. |
||||||
|
*/ |
||||||
|
#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) |
||||||
|
#define CH_CFG_FACTORY_PIPES FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/** @} */ |
||||||
|
|
||||||
|
/*===========================================================================*/ |
||||||
|
/**
|
||||||
|
* @name Debug options |
||||||
|
* @{ |
||||||
|
*/ |
||||||
|
/*===========================================================================*/ |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Debug option, kernel statistics. |
||||||
|
* |
||||||
|
* @note The default is @p FALSE. |
||||||
|
*/ |
||||||
|
#if !defined(CH_DBG_STATISTICS) |
||||||
|
#define CH_DBG_STATISTICS FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Debug option, system state check. |
||||||
|
* @details If enabled the correct call protocol for system APIs is checked |
||||||
|
* at runtime. |
||||||
|
* |
||||||
|
* @note The default is @p FALSE. |
||||||
|
*/ |
||||||
|
#if !defined(CH_DBG_SYSTEM_STATE_CHECK) |
||||||
|
#define CH_DBG_SYSTEM_STATE_CHECK FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Debug option, parameters checks. |
||||||
|
* @details If enabled then the checks on the API functions input |
||||||
|
* parameters are activated. |
||||||
|
* |
||||||
|
* @note The default is @p FALSE. |
||||||
|
*/ |
||||||
|
#if !defined(CH_DBG_ENABLE_CHECKS) |
||||||
|
#define CH_DBG_ENABLE_CHECKS FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Debug option, consistency checks. |
||||||
|
* @details If enabled then all the assertions in the kernel code are |
||||||
|
* activated. This includes consistency checks inside the kernel, |
||||||
|
* runtime anomalies and port-defined checks. |
||||||
|
* |
||||||
|
* @note The default is @p FALSE. |
||||||
|
*/ |
||||||
|
#if !defined(CH_DBG_ENABLE_ASSERTS) |
||||||
|
#define CH_DBG_ENABLE_ASSERTS FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Debug option, trace buffer. |
||||||
|
* @details If enabled then the trace buffer is activated. |
||||||
|
* |
||||||
|
* @note The default is @p CH_DBG_TRACE_MASK_DISABLED. |
||||||
|
*/ |
||||||
|
#if !defined(CH_DBG_TRACE_MASK) |
||||||
|
#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Trace buffer entries. |
||||||
|
* @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is |
||||||
|
* different from @p CH_DBG_TRACE_MASK_DISABLED. |
||||||
|
*/ |
||||||
|
#if !defined(CH_DBG_TRACE_BUFFER_SIZE) |
||||||
|
#define CH_DBG_TRACE_BUFFER_SIZE 128 |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Debug option, stack checks. |
||||||
|
* @details If enabled then a runtime stack check is performed. |
||||||
|
* |
||||||
|
* @note The default is @p FALSE. |
||||||
|
* @note The stack check is performed in a architecture/port dependent way. |
||||||
|
* It may not be implemented or some ports. |
||||||
|
* @note The default failure mode is to halt the system with the global |
||||||
|
* @p panic_msg variable set to @p NULL. |
||||||
|
*/ |
||||||
|
#if !defined(CH_DBG_ENABLE_STACK_CHECK) |
||||||
|
#define CH_DBG_ENABLE_STACK_CHECK FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Debug option, stacks initialization. |
||||||
|
* @details If enabled then the threads working area is filled with a byte |
||||||
|
* value when a thread is created. This can be useful for the |
||||||
|
* runtime measurement of the used stack. |
||||||
|
* |
||||||
|
* @note The default is @p FALSE. |
||||||
|
*/ |
||||||
|
#if !defined(CH_DBG_FILL_THREADS) |
||||||
|
#define CH_DBG_FILL_THREADS FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Debug option, threads profiling. |
||||||
|
* @details If enabled then a field is added to the @p thread_t structure that |
||||||
|
* counts the system ticks occurred while executing the thread. |
||||||
|
* |
||||||
|
* @note The default is @p FALSE. |
||||||
|
* @note This debug option is not currently compatible with the |
||||||
|
* tickless mode. |
||||||
|
*/ |
||||||
|
#if !defined(CH_DBG_THREADS_PROFILING) |
||||||
|
#define CH_DBG_THREADS_PROFILING FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/** @} */ |
||||||
|
|
||||||
|
/*===========================================================================*/ |
||||||
|
/**
|
||||||
|
* @name Kernel hooks |
||||||
|
* @{ |
||||||
|
*/ |
||||||
|
/*===========================================================================*/ |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief System structure extension. |
||||||
|
* @details User fields added to the end of the @p ch_system_t structure. |
||||||
|
*/ |
||||||
|
#define CH_CFG_SYSTEM_EXTRA_FIELDS \ |
||||||
|
/* Add threads custom fields here.*/ |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief System initialization hook. |
||||||
|
* @details User initialization code added to the @p chSysInit() function |
||||||
|
* just before interrupts are enabled globally. |
||||||
|
*/ |
||||||
|
#define CH_CFG_SYSTEM_INIT_HOOK() { \ |
||||||
|
/* Add threads initialization code here.*/ \
|
||||||
|
} |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Threads descriptor structure extension. |
||||||
|
* @details User fields added to the end of the @p thread_t structure. |
||||||
|
*/ |
||||||
|
#define CH_CFG_THREAD_EXTRA_FIELDS \ |
||||||
|
/* Add threads custom fields here.*/ |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Threads initialization hook. |
||||||
|
* @details User initialization code added to the @p _thread_init() function. |
||||||
|
* |
||||||
|
* @note It is invoked from within @p _thread_init() and implicitly from all |
||||||
|
* the threads creation APIs. |
||||||
|
*/ |
||||||
|
#define CH_CFG_THREAD_INIT_HOOK(tp) { \ |
||||||
|
/* Add threads initialization code here.*/ \
|
||||||
|
} |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Threads finalization hook. |
||||||
|
* @details User finalization code added to the @p chThdExit() API. |
||||||
|
*/ |
||||||
|
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ |
||||||
|
/* Add threads finalization code here.*/ \
|
||||||
|
} |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Context switch hook. |
||||||
|
* @details This hook is invoked just before switching between threads. |
||||||
|
*/ |
||||||
|
#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ |
||||||
|
/* Context switch code here.*/ \
|
||||||
|
} |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief ISR enter hook. |
||||||
|
*/ |
||||||
|
#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ |
||||||
|
/* IRQ prologue code here.*/ \
|
||||||
|
} |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief ISR exit hook. |
||||||
|
*/ |
||||||
|
#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ |
||||||
|
/* IRQ epilogue code here.*/ \
|
||||||
|
} |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Idle thread enter hook. |
||||||
|
* @note This hook is invoked within a critical zone, no OS functions |
||||||
|
* should be invoked from here. |
||||||
|
* @note This macro can be used to activate a power saving mode. |
||||||
|
*/ |
||||||
|
#define CH_CFG_IDLE_ENTER_HOOK() { \ |
||||||
|
/* Idle-enter code here.*/ \
|
||||||
|
} |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Idle thread leave hook. |
||||||
|
* @note This hook is invoked within a critical zone, no OS functions |
||||||
|
* should be invoked from here. |
||||||
|
* @note This macro can be used to deactivate a power saving mode. |
||||||
|
*/ |
||||||
|
#define CH_CFG_IDLE_LEAVE_HOOK() { \ |
||||||
|
/* Idle-leave code here.*/ \
|
||||||
|
} |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Idle Loop hook. |
||||||
|
* @details This hook is continuously invoked by the idle thread loop. |
||||||
|
*/ |
||||||
|
#define CH_CFG_IDLE_LOOP_HOOK() { \ |
||||||
|
/* Idle loop code here.*/ \
|
||||||
|
} |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief System tick event hook. |
||||||
|
* @details This hook is invoked in the system tick handler immediately |
||||||
|
* after processing the virtual timers queue. |
||||||
|
*/ |
||||||
|
#define CH_CFG_SYSTEM_TICK_HOOK() { \ |
||||||
|
/* System tick event code here.*/ \
|
||||||
|
} |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief System halt hook. |
||||||
|
* @details This hook is invoked in case to a system halting error before |
||||||
|
* the system is halted. |
||||||
|
*/ |
||||||
|
#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ |
||||||
|
/* System halt code here.*/ \
|
||||||
|
} |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Trace hook. |
||||||
|
* @details This hook is invoked each time a new record is written in the |
||||||
|
* trace buffer. |
||||||
|
*/ |
||||||
|
#define CH_CFG_TRACE_HOOK(tep) { \ |
||||||
|
/* Trace code here.*/ \
|
||||||
|
} |
||||||
|
|
||||||
|
/** @} */ |
||||||
|
|
||||||
|
/*===========================================================================*/ |
||||||
|
/* Port-specific settings (override port settings defaulted in chcore.h). */ |
||||||
|
/*===========================================================================*/ |
||||||
|
|
||||||
|
#endif /* CHCONF_H */ |
||||||
|
|
||||||
|
/** @} */ |
||||||
@ -0,0 +1,77 @@ |
|||||||
|
/*
|
||||||
|
Copyright 2015 Jun Wako <wakojun@gmail.com> |
||||||
|
|
||||||
|
This program is free software: you can redistribute it and/or modify |
||||||
|
it under the terms of the GNU General Public License as published by |
||||||
|
the Free Software Foundation, either version 2 of the License, or |
||||||
|
(at your option) any later version. |
||||||
|
|
||||||
|
This program is distributed in the hope that it will be useful, |
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||||
|
GNU General Public License for more details. |
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License |
||||||
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/ |
||||||
|
|
||||||
|
#pragma once |
||||||
|
|
||||||
|
/* USB Device descriptor parameter */ |
||||||
|
#define VENDOR_ID 0x4145 // "AE"
|
||||||
|
#define PRODUCT_ID 0xA652 // AEboards EXT65 Rev2
|
||||||
|
#define DEVICE_VER 0x0001 |
||||||
|
#define MANUFACTURER AEboards |
||||||
|
#define PRODUCT AEBoards Ext65 Rev2 |
||||||
|
|
||||||
|
/* key matrix size */ |
||||||
|
/* key matrix size */ |
||||||
|
#define MATRIX_ROWS 10 |
||||||
|
#define MATRIX_COLS 10 |
||||||
|
|
||||||
|
/* key matrix pins */ |
||||||
|
#define MATRIX_ROW_PINS { A10, A9, A8, B7, A2, A1, B12, B11, B10, B2 } |
||||||
|
#define MATRIX_COL_PINS { B14, B6, A0, B1, B0, A7, A6, A5, A4, A3 } |
||||||
|
|
||||||
|
#define DIODE_DIRECTION COL2ROW |
||||||
|
|
||||||
|
/* Set 0 if debouncing isn't needed */ |
||||||
|
#define DEBOUNCE 5 |
||||||
|
|
||||||
|
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ |
||||||
|
#define LOCKING_SUPPORT_ENABLE |
||||||
|
/* Locking resynchronize hack */ |
||||||
|
#define LOCKING_RESYNC_ENABLE |
||||||
|
|
||||||
|
//RGB Underglow WS2812
|
||||||
|
#define RGBLIGHT_ANIMATIONS |
||||||
|
#define RGBLED_NUM 24 |
||||||
|
#define RGB_DI_PIN B15 |
||||||
|
|
||||||
|
//SPI
|
||||||
|
#define WS2812_SPI SPID2 |
||||||
|
#define WS2812_SPI_MOSI_PAL_MODE 0 |
||||||
|
#define WS2812_EXTERNAL_PULLUP |
||||||
|
|
||||||
|
// I2C OLED defines
|
||||||
|
#define I2C1_SCL 8 |
||||||
|
#define I2C1_SDA 9 |
||||||
|
|
||||||
|
#define I2C1_SCL_PAL_MODE 1 |
||||||
|
#define I2C1_SDA_PAL_MODE 1 |
||||||
|
|
||||||
|
#define I2C1_TIMINGR_PRESC 0U |
||||||
|
#define I2C1_TIMINGR_SCLDEL 3U |
||||||
|
#define I2C1_TIMINGR_SDADEL 1U |
||||||
|
#define I2C1_TIMINGR_SCLH 3U |
||||||
|
#define I2C1_TIMINGR_SCLL 9U |
||||||
|
|
||||||
|
// LED defines
|
||||||
|
#define BACKLIGHT_PIN B5 |
||||||
|
#define BACKLIGHT_PWM_DRIVER PWMD3 |
||||||
|
#define BACKLIGHT_PWM_CHANNEL 2 |
||||||
|
#define BACKLIGHT_PAL_MODE 1 |
||||||
|
|
||||||
|
#define BACKLIGHT_LEVELS 6 |
||||||
|
#define BACKLIGHT_BREATHING |
||||||
|
#define BREATHING_PERIOD 6 |
||||||
@ -0,0 +1,525 @@ |
|||||||
|
/*
|
||||||
|
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio |
||||||
|
|
||||||
|
Licensed under the Apache License, Version 2.0 (the "License"); |
||||||
|
you may not use this file except in compliance with the License. |
||||||
|
You may obtain a copy of the License at |
||||||
|
|
||||||
|
http://www.apache.org/licenses/LICENSE-2.0
|
||||||
|
|
||||||
|
Unless required by applicable law or agreed to in writing, software |
||||||
|
distributed under the License is distributed on an "AS IS" BASIS, |
||||||
|
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
||||||
|
See the License for the specific language governing permissions and |
||||||
|
limitations under the License. |
||||||
|
*/ |
||||||
|
|
||||||
|
/**
|
||||||
|
* @file templates/halconf.h |
||||||
|
* @brief HAL configuration header. |
||||||
|
* @details HAL configuration file, this file allows to enable or disable the |
||||||
|
* various device drivers from your application. You may also use |
||||||
|
* this file in order to override the device drivers default settings. |
||||||
|
* |
||||||
|
* @addtogroup HAL_CONF |
||||||
|
* @{ |
||||||
|
*/ |
||||||
|
|
||||||
|
#ifndef HALCONF_H |
||||||
|
#define HALCONF_H |
||||||
|
|
||||||
|
#define _CHIBIOS_HAL_CONF_ |
||||||
|
#define _CHIBIOS_HAL_CONF_VER_7_0_ |
||||||
|
|
||||||
|
#include "mcuconf.h" |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enables the PAL subsystem. |
||||||
|
*/ |
||||||
|
#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) |
||||||
|
#define HAL_USE_PAL TRUE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enables the ADC subsystem. |
||||||
|
*/ |
||||||
|
#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) |
||||||
|
#define HAL_USE_ADC FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enables the CAN subsystem. |
||||||
|
*/ |
||||||
|
#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) |
||||||
|
#define HAL_USE_CAN FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enables the cryptographic subsystem. |
||||||
|
*/ |
||||||
|
#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) |
||||||
|
#define HAL_USE_CRY FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enables the DAC subsystem. |
||||||
|
*/ |
||||||
|
#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) |
||||||
|
#define HAL_USE_DAC FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enables the GPT subsystem. |
||||||
|
*/ |
||||||
|
#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) |
||||||
|
#define HAL_USE_GPT FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enables the I2C subsystem. |
||||||
|
*/ |
||||||
|
#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) |
||||||
|
#define HAL_USE_I2C TRUE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enables the I2S subsystem. |
||||||
|
*/ |
||||||
|
#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) |
||||||
|
#define HAL_USE_I2S FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enables the ICU subsystem. |
||||||
|
*/ |
||||||
|
#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) |
||||||
|
#define HAL_USE_ICU FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enables the MAC subsystem. |
||||||
|
*/ |
||||||
|
#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) |
||||||
|
#define HAL_USE_MAC FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enables the MMC_SPI subsystem. |
||||||
|
*/ |
||||||
|
#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) |
||||||
|
#define HAL_USE_MMC_SPI FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enables the PWM subsystem. |
||||||
|
*/ |
||||||
|
#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) |
||||||
|
#define HAL_USE_PWM TRUE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enables the RTC subsystem. |
||||||
|
*/ |
||||||
|
#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) |
||||||
|
#define HAL_USE_RTC FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enables the SDC subsystem. |
||||||
|
*/ |
||||||
|
#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) |
||||||
|
#define HAL_USE_SDC FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enables the SERIAL subsystem. |
||||||
|
*/ |
||||||
|
#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) |
||||||
|
#define HAL_USE_SERIAL FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enables the SERIAL over USB subsystem. |
||||||
|
*/ |
||||||
|
#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) |
||||||
|
#define HAL_USE_SERIAL_USB FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enables the SIO subsystem. |
||||||
|
*/ |
||||||
|
#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) |
||||||
|
#define HAL_USE_SIO FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enables the SPI subsystem. |
||||||
|
*/ |
||||||
|
#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) |
||||||
|
#define HAL_USE_SPI TRUE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enables the TRNG subsystem. |
||||||
|
*/ |
||||||
|
#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) |
||||||
|
#define HAL_USE_TRNG FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enables the UART subsystem. |
||||||
|
*/ |
||||||
|
#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) |
||||||
|
#define HAL_USE_UART FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enables the USB subsystem. |
||||||
|
*/ |
||||||
|
#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) |
||||||
|
#define HAL_USE_USB TRUE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enables the WDG subsystem. |
||||||
|
*/ |
||||||
|
#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) |
||||||
|
#define HAL_USE_WDG FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enables the WSPI subsystem. |
||||||
|
*/ |
||||||
|
#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) |
||||||
|
#define HAL_USE_WSPI FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/*===========================================================================*/ |
||||||
|
/* PAL driver related settings. */ |
||||||
|
/*===========================================================================*/ |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enables synchronous APIs. |
||||||
|
* @note Disabling this option saves both code and data space. |
||||||
|
*/ |
||||||
|
#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) |
||||||
|
#define PAL_USE_CALLBACKS FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enables synchronous APIs. |
||||||
|
* @note Disabling this option saves both code and data space. |
||||||
|
*/ |
||||||
|
#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) |
||||||
|
#define PAL_USE_WAIT FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/*===========================================================================*/ |
||||||
|
/* ADC driver related settings. */ |
||||||
|
/*===========================================================================*/ |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enables synchronous APIs. |
||||||
|
* @note Disabling this option saves both code and data space. |
||||||
|
*/ |
||||||
|
#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) |
||||||
|
#define ADC_USE_WAIT TRUE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. |
||||||
|
* @note Disabling this option saves both code and data space. |
||||||
|
*/ |
||||||
|
#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) |
||||||
|
#define ADC_USE_MUTUAL_EXCLUSION TRUE |
||||||
|
#endif |
||||||
|
|
||||||
|
/*===========================================================================*/ |
||||||
|
/* CAN driver related settings. */ |
||||||
|
/*===========================================================================*/ |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Sleep mode related APIs inclusion switch. |
||||||
|
*/ |
||||||
|
#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) |
||||||
|
#define CAN_USE_SLEEP_MODE TRUE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enforces the driver to use direct callbacks rather than OSAL events. |
||||||
|
*/ |
||||||
|
#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) |
||||||
|
#define CAN_ENFORCE_USE_CALLBACKS FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/*===========================================================================*/ |
||||||
|
/* CRY driver related settings. */ |
||||||
|
/*===========================================================================*/ |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enables the SW fall-back of the cryptographic driver. |
||||||
|
* @details When enabled, this option, activates a fall-back software |
||||||
|
* implementation for algorithms not supported by the underlying |
||||||
|
* hardware. |
||||||
|
* @note Fall-back implementations may not be present for all algorithms. |
||||||
|
*/ |
||||||
|
#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) |
||||||
|
#define HAL_CRY_USE_FALLBACK FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Makes the driver forcibly use the fall-back implementations. |
||||||
|
*/ |
||||||
|
#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) |
||||||
|
#define HAL_CRY_ENFORCE_FALLBACK FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/*===========================================================================*/ |
||||||
|
/* DAC driver related settings. */ |
||||||
|
/*===========================================================================*/ |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enables synchronous APIs. |
||||||
|
* @note Disabling this option saves both code and data space. |
||||||
|
*/ |
||||||
|
#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) |
||||||
|
#define DAC_USE_WAIT TRUE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. |
||||||
|
* @note Disabling this option saves both code and data space. |
||||||
|
*/ |
||||||
|
#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) |
||||||
|
#define DAC_USE_MUTUAL_EXCLUSION TRUE |
||||||
|
#endif |
||||||
|
|
||||||
|
/*===========================================================================*/ |
||||||
|
/* I2C driver related settings. */ |
||||||
|
/*===========================================================================*/ |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enables the mutual exclusion APIs on the I2C bus. |
||||||
|
*/ |
||||||
|
#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) |
||||||
|
#define I2C_USE_MUTUAL_EXCLUSION TRUE |
||||||
|
#endif |
||||||
|
|
||||||
|
/*===========================================================================*/ |
||||||
|
/* MAC driver related settings. */ |
||||||
|
/*===========================================================================*/ |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enables the zero-copy API. |
||||||
|
*/ |
||||||
|
#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) |
||||||
|
#define MAC_USE_ZERO_COPY FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enables an event sources for incoming packets. |
||||||
|
*/ |
||||||
|
#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) |
||||||
|
#define MAC_USE_EVENTS TRUE |
||||||
|
#endif |
||||||
|
|
||||||
|
/*===========================================================================*/ |
||||||
|
/* MMC_SPI driver related settings. */ |
||||||
|
/*===========================================================================*/ |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Delays insertions. |
||||||
|
* @details If enabled this options inserts delays into the MMC waiting |
||||||
|
* routines releasing some extra CPU time for the threads with |
||||||
|
* lower priority, this may slow down the driver a bit however. |
||||||
|
* This option is recommended also if the SPI driver does not |
||||||
|
* use a DMA channel and heavily loads the CPU. |
||||||
|
*/ |
||||||
|
#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) |
||||||
|
#define MMC_NICE_WAITING TRUE |
||||||
|
#endif |
||||||
|
|
||||||
|
/*===========================================================================*/ |
||||||
|
/* SDC driver related settings. */ |
||||||
|
/*===========================================================================*/ |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Number of initialization attempts before rejecting the card. |
||||||
|
* @note Attempts are performed at 10mS intervals. |
||||||
|
*/ |
||||||
|
#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) |
||||||
|
#define SDC_INIT_RETRY 100 |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Include support for MMC cards. |
||||||
|
* @note MMC support is not yet implemented so this option must be kept |
||||||
|
* at @p FALSE. |
||||||
|
*/ |
||||||
|
#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) |
||||||
|
#define SDC_MMC_SUPPORT FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Delays insertions. |
||||||
|
* @details If enabled this options inserts delays into the MMC waiting |
||||||
|
* routines releasing some extra CPU time for the threads with |
||||||
|
* lower priority, this may slow down the driver a bit however. |
||||||
|
*/ |
||||||
|
#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) |
||||||
|
#define SDC_NICE_WAITING TRUE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief OCR initialization constant for V20 cards. |
||||||
|
*/ |
||||||
|
#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) |
||||||
|
#define SDC_INIT_OCR_V20 0x50FF8000U |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief OCR initialization constant for non-V20 cards. |
||||||
|
*/ |
||||||
|
#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) |
||||||
|
#define SDC_INIT_OCR 0x80100000U |
||||||
|
#endif |
||||||
|
|
||||||
|
/*===========================================================================*/ |
||||||
|
/* SERIAL driver related settings. */ |
||||||
|
/*===========================================================================*/ |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Default bit rate. |
||||||
|
* @details Configuration parameter, this is the baud rate selected for the |
||||||
|
* default configuration. |
||||||
|
*/ |
||||||
|
#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) |
||||||
|
#define SERIAL_DEFAULT_BITRATE 38400 |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Serial buffers size. |
||||||
|
* @details Configuration parameter, you can change the depth of the queue |
||||||
|
* buffers depending on the requirements of your application. |
||||||
|
* @note The default is 16 bytes for both the transmission and receive |
||||||
|
* buffers. |
||||||
|
*/ |
||||||
|
#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) |
||||||
|
#define SERIAL_BUFFERS_SIZE 16 |
||||||
|
#endif |
||||||
|
|
||||||
|
/*===========================================================================*/ |
||||||
|
/* SERIAL_USB driver related setting. */ |
||||||
|
/*===========================================================================*/ |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Serial over USB buffers size. |
||||||
|
* @details Configuration parameter, the buffer size must be a multiple of |
||||||
|
* the USB data endpoint maximum packet size. |
||||||
|
* @note The default is 256 bytes for both the transmission and receive |
||||||
|
* buffers. |
||||||
|
*/ |
||||||
|
#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) |
||||||
|
#define SERIAL_USB_BUFFERS_SIZE 1 |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Serial over USB number of buffers. |
||||||
|
* @note The default is 2 buffers. |
||||||
|
*/ |
||||||
|
#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) |
||||||
|
#define SERIAL_USB_BUFFERS_NUMBER 2 |
||||||
|
#endif |
||||||
|
|
||||||
|
/*===========================================================================*/ |
||||||
|
/* SPI driver related settings. */ |
||||||
|
/*===========================================================================*/ |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enables synchronous APIs. |
||||||
|
* @note Disabling this option saves both code and data space. |
||||||
|
*/ |
||||||
|
#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) |
||||||
|
#define SPI_USE_WAIT TRUE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enables circular transfers APIs. |
||||||
|
* @note Disabling this option saves both code and data space. |
||||||
|
*/ |
||||||
|
#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) |
||||||
|
#define SPI_USE_CIRCULAR FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. |
||||||
|
* @note Disabling this option saves both code and data space. |
||||||
|
*/ |
||||||
|
#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) |
||||||
|
#define SPI_USE_MUTUAL_EXCLUSION TRUE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Handling method for SPI CS line. |
||||||
|
* @note Disabling this option saves both code and data space. |
||||||
|
*/ |
||||||
|
#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) |
||||||
|
#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD |
||||||
|
#endif |
||||||
|
|
||||||
|
/*===========================================================================*/ |
||||||
|
/* UART driver related settings. */ |
||||||
|
/*===========================================================================*/ |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enables synchronous APIs. |
||||||
|
* @note Disabling this option saves both code and data space. |
||||||
|
*/ |
||||||
|
#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) |
||||||
|
#define UART_USE_WAIT FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. |
||||||
|
* @note Disabling this option saves both code and data space. |
||||||
|
*/ |
||||||
|
#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) |
||||||
|
#define UART_USE_MUTUAL_EXCLUSION FALSE |
||||||
|
#endif |
||||||
|
|
||||||
|
/*===========================================================================*/ |
||||||
|
/* USB driver related settings. */ |
||||||
|
/*===========================================================================*/ |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enables synchronous APIs. |
||||||
|
* @note Disabling this option saves both code and data space. |
||||||
|
*/ |
||||||
|
#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) |
||||||
|
#define USB_USE_WAIT TRUE |
||||||
|
#endif |
||||||
|
|
||||||
|
/*===========================================================================*/ |
||||||
|
/* WSPI driver related settings. */ |
||||||
|
/*===========================================================================*/ |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enables synchronous APIs. |
||||||
|
* @note Disabling this option saves both code and data space. |
||||||
|
*/ |
||||||
|
#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) |
||||||
|
#define WSPI_USE_WAIT TRUE |
||||||
|
#endif |
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. |
||||||
|
* @note Disabling this option saves both code and data space. |
||||||
|
*/ |
||||||
|
#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) |
||||||
|
#define WSPI_USE_MUTUAL_EXCLUSION TRUE |
||||||
|
#endif |
||||||
|
|
||||||
|
#endif /* HALCONF_H */ |
||||||
|
|
||||||
|
/** @} */ |
||||||
@ -0,0 +1,98 @@ |
|||||||
|
/* Copyright 2018 Jason Williams (Wilba)
|
||||||
|
* |
||||||
|
* This program is free software: you can redistribute it and/or modify |
||||||
|
* it under the terms of the GNU General Public License as published by |
||||||
|
* the Free Software Foundation, either version 2 of the License, or |
||||||
|
* (at your option) any later version. |
||||||
|
* |
||||||
|
* This program is distributed in the hope that it will be useful, |
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||||
|
* GNU General Public License for more details. |
||||||
|
* |
||||||
|
* You should have received a copy of the GNU General Public License |
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/ |
||||||
|
#include QMK_KEYBOARD_H |
||||||
|
|
||||||
|
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { |
||||||
|
/* Keymap BASE: (Base Layer) Default Layer
|
||||||
|
* ,-------------------. ,-------------------------------------------------------------------. |
||||||
|
* |- | * | / |NmLK| |Esc| 1 | 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|pipe| ~ | Pscr| |
||||||
|
* |-------------------| |-------------------------------------------------------------------| |
||||||
|
* | | 9 | 8 | 7 | |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| BSPC | Del | |
||||||
|
* | + |--------------| |-------------------------------------------------------------------| |
||||||
|
* | | 6 | 5 | 4 | |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return | Pgup| |
||||||
|
* |-------------------| |-------------------------------------------------------------------| |
||||||
|
* | | 3 | 2 | 1 | |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | Up | Pgdn| |
||||||
|
* | ENT|-------------------------------------------------------------------------------------| |
||||||
|
* | | . | 0 | | Ctrl | Win | Alt | Space | FN | Ctrl | |Left| Dn | Rght| |
||||||
|
* `------------------------------------------------------------------------------------------' |
||||||
|
*/ |
||||||
|
[0] = LAYOUT_ext65( |
||||||
|
RGB_M_T, BL_INC , BL_DEC , BL_TOGG, KC_ESC , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , KC_MINS, KC_EQL , KC_BSLS, KC_GRV , KC_PSCR, |
||||||
|
RGB_TOG, KC_P9 , KC_P8 , KC_P7 , KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P , KC_LBRC, KC_RBRC, KC_BSPC, KC_DEL , |
||||||
|
KC_PPLS, KC_P6 , KC_P5 , KC_P4 , KC_CAPS, KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L , KC_SCLN, KC_QUOT, KC_ENT , KC_PGUP, |
||||||
|
KC_PENT, KC_P3 , KC_P2 , KC_P1 , KC_LSFT, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT, KC_UP , KC_PGDN, |
||||||
|
KC_PENT, KC_PDOT, KC_P0 , KC_P0 , KC_LCTL, KC_LGUI, KC_LALT, KC_SPC , MO(1) , KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT |
||||||
|
), |
||||||
|
|
||||||
|
[1] = LAYOUT_ext65( |
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET , KC_TRNS, |
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, |
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, |
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, |
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS |
||||||
|
), |
||||||
|
|
||||||
|
[2] = LAYOUT_ext65( |
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, |
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, |
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, |
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, |
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS |
||||||
|
), |
||||||
|
|
||||||
|
[3] = LAYOUT_ext65( |
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, |
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, |
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, |
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, |
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS |
||||||
|
) |
||||||
|
}; |
||||||
|
|
||||||
|
#ifdef OLED_DRIVER_ENABLE |
||||||
|
|
||||||
|
void render_layer_state(void) { |
||||||
|
oled_write_ln(PSTR("LAYER"), false); |
||||||
|
oled_write_ln(PSTR("L1"), layer_state_is(1)); |
||||||
|
oled_write_ln(PSTR("L2"), layer_state_is(2)); |
||||||
|
oled_write_ln(PSTR("L3"), layer_state_is(3)); |
||||||
|
oled_write_ln(PSTR(" "), false); |
||||||
|
} |
||||||
|
|
||||||
|
void render_keylock_status(led_t led_state) { |
||||||
|
oled_write_ln(PSTR("Lock:"), false); |
||||||
|
oled_write(PSTR("N"), led_state.num_lock); |
||||||
|
oled_write(PSTR("C"), led_state.caps_lock); |
||||||
|
oled_write_ln(PSTR("S"), led_state.scroll_lock); |
||||||
|
oled_write_ln(PSTR(" "), false); |
||||||
|
} |
||||||
|
|
||||||
|
void render_mod_status(uint8_t modifiers) { |
||||||
|
oled_write_ln(PSTR("Mods:"), false); |
||||||
|
oled_write(PSTR("S"), (modifiers & MOD_MASK_SHIFT)); |
||||||
|
oled_write(PSTR("C"), (modifiers & MOD_MASK_CTRL)); |
||||||
|
oled_write(PSTR("A"), (modifiers & MOD_MASK_ALT)); |
||||||
|
oled_write_ln(PSTR("G"), (modifiers & MOD_MASK_GUI)); |
||||||
|
oled_write_ln(PSTR(" "), false); |
||||||
|
} |
||||||
|
|
||||||
|
void oled_task_user(void) { |
||||||
|
render_layer_state(); |
||||||
|
render_keylock_status(host_keyboard_led_state()); |
||||||
|
render_mod_status(get_mods()|get_oneshot_mods()); |
||||||
|
} |
||||||
|
|
||||||
|
#endif |
||||||
@ -0,0 +1,2 @@ |
|||||||
|
# The Default Ext65Rev2 Layout |
||||||
|
|
||||||
@ -0,0 +1,98 @@ |
|||||||
|
/* Copyright 2018 Jason Williams (Wilba)
|
||||||
|
* |
||||||
|
* This program is free software: you can redistribute it and/or modify |
||||||
|
* it under the terms of the GNU General Public License as published by |
||||||
|
* the Free Software Foundation, either version 2 of the License, or |
||||||
|
* (at your option) any later version. |
||||||
|
* |
||||||
|
* This program is distributed in the hope that it will be useful, |
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||||
|
* GNU General Public License for more details. |
||||||
|
* |
||||||
|
* You should have received a copy of the GNU General Public License |
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/ |
||||||
|
#include QMK_KEYBOARD_H |
||||||
|
|
||||||
|
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { |
||||||
|
/* Keymap BASE: (Base Layer) Default Layer
|
||||||
|
* ,-------------------. ,-------------------------------------------------------------------. |
||||||
|
* |- | * | / |NmLK| |Esc| 1 | 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|pipe| ~ | Pscr| |
||||||
|
* |-------------------| |-------------------------------------------------------------------| |
||||||
|
* | | 9 | 8 | 7 | |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| BSPC | Del | |
||||||
|
* | + |--------------| |-------------------------------------------------------------------| |
||||||
|
* | | 6 | 5 | 4 | |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return | Pgup| |
||||||
|
* |-------------------| |-------------------------------------------------------------------| |
||||||
|
* | | 3 | 2 | 1 | |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | Up | Pgdn| |
||||||
|
* | ENT|-------------------------------------------------------------------------------------| |
||||||
|
* | | . | 0 | | Ctrl | Win | Alt | Space | FN | Ctrl | |Left| Dn | Rght| |
||||||
|
* `------------------------------------------------------------------------------------------' |
||||||
|
*/ |
||||||
|
[0] = LAYOUT_ext65( |
||||||
|
RGB_M_T, BL_INC , BL_DEC , BL_TOGG, KC_ESC , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , KC_MINS, KC_EQL , KC_BSLS, KC_GRV , KC_PSCR, |
||||||
|
RGB_TOG, KC_P9 , KC_P8 , KC_P7 , KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P , KC_LBRC, KC_RBRC, KC_BSPC, KC_DEL , |
||||||
|
KC_PPLS, KC_P6 , KC_P5 , KC_P4 , KC_CAPS, KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L , KC_SCLN, KC_QUOT, KC_ENT , KC_PGUP, |
||||||
|
KC_PENT, KC_P3 , KC_P2 , KC_P1 , KC_LSFT, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT, KC_UP , KC_PGDN, |
||||||
|
KC_PENT, KC_PDOT, KC_P0 , KC_P0 , KC_LCTL, KC_LGUI, KC_LALT, KC_SPC , MO(1) , KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT |
||||||
|
), |
||||||
|
|
||||||
|
[1] = LAYOUT_ext65( |
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET , KC_TRNS, |
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, |
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, |
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, |
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS |
||||||
|
), |
||||||
|
|
||||||
|
[2] = LAYOUT_ext65( |
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, |
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, |
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, |
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, |
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS |
||||||
|
), |
||||||
|
|
||||||
|
[3] = LAYOUT_ext65( |
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, |
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, |
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, |
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, |
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS |
||||||
|
) |
||||||
|
}; |
||||||
|
|
||||||
|
#ifdef OLED_DRIVER_ENABLE |
||||||
|
|
||||||
|
void render_layer_state(void) { |
||||||
|
oled_write_ln(PSTR("LAYER"), false); |
||||||
|
oled_write_ln(PSTR("L1"), layer_state_is(1)); |
||||||
|
oled_write_ln(PSTR("L2"), layer_state_is(2)); |
||||||
|
oled_write_ln(PSTR("L3"), layer_state_is(3)); |
||||||
|
oled_write_ln(PSTR(" "), false); |
||||||
|
} |
||||||
|
|
||||||
|
void render_keylock_status(led_t led_state) { |
||||||
|
oled_write_ln(PSTR("Lock:"), false); |
||||||
|
oled_write(PSTR("N"), led_state.num_lock); |
||||||
|
oled_write(PSTR("C"), led_state.caps_lock); |
||||||
|
oled_write_ln(PSTR("S"), led_state.scroll_lock); |
||||||
|
oled_write_ln(PSTR(" "), false); |
||||||
|
} |
||||||
|
|
||||||
|
void render_mod_status(uint8_t modifiers) { |
||||||
|
oled_write_ln(PSTR("Mods:"), false); |
||||||
|
oled_write(PSTR("S"), (modifiers & MOD_MASK_SHIFT)); |
||||||
|
oled_write(PSTR("C"), (modifiers & MOD_MASK_CTRL)); |
||||||
|
oled_write(PSTR("A"), (modifiers & MOD_MASK_ALT)); |
||||||
|
oled_write_ln(PSTR("G"), (modifiers & MOD_MASK_GUI)); |
||||||
|
oled_write_ln(PSTR(" "), false); |
||||||
|
} |
||||||
|
|
||||||
|
void oled_task_user(void) { |
||||||
|
render_layer_state(); |
||||||
|
render_keylock_status(host_keyboard_led_state()); |
||||||
|
render_mod_status(get_mods()|get_oneshot_mods()); |
||||||
|
} |
||||||
|
|
||||||
|
#endif |
||||||
@ -0,0 +1,2 @@ |
|||||||
|
# The VIA Ext65Rev2 Layout |
||||||
|
|
||||||
@ -0,0 +1 @@ |
|||||||
|
VIA_ENABLE = yes
|
||||||
@ -0,0 +1,176 @@ |
|||||||
|
/*
|
||||||
|
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio |
||||||
|
|
||||||
|
Licensed under the Apache License, Version 2.0 (the "License"); |
||||||
|
you may not use this file except in compliance with the License. |
||||||
|
You may obtain a copy of the License at |
||||||
|
|
||||||
|
http://www.apache.org/licenses/LICENSE-2.0
|
||||||
|
|
||||||
|
Unless required by applicable law or agreed to in writing, software |
||||||
|
distributed under the License is distributed on an "AS IS" BASIS, |
||||||
|
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
||||||
|
See the License for the specific language governing permissions and |
||||||
|
limitations under the License. |
||||||
|
*/ |
||||||
|
|
||||||
|
#ifndef _MCUCONF_H_ |
||||||
|
#define _MCUCONF_H_ |
||||||
|
|
||||||
|
/*
|
||||||
|
* STM32F0xx drivers configuration. |
||||||
|
* The following settings override the default settings present in |
||||||
|
* the various device driver implementation headers. |
||||||
|
* Note that the settings for each driver only have effect if the whole |
||||||
|
* driver is enabled in halconf.h. |
||||||
|
* |
||||||
|
* IRQ priorities: |
||||||
|
* 3...0 Lowest...Highest. |
||||||
|
* |
||||||
|
* DMA priorities: |
||||||
|
* 0...3 Lowest...Highest. |
||||||
|
*/ |
||||||
|
|
||||||
|
#define STM32F0xx_MCUCONF |
||||||
|
// #define STM32F070xB
|
||||||
|
|
||||||
|
/*
|
||||||
|
* HAL driver system settings. |
||||||
|
*/ |
||||||
|
#define STM32_NO_INIT FALSE |
||||||
|
#define STM32_PVD_ENABLE FALSE |
||||||
|
#define STM32_PLS STM32_PLS_LEV0 |
||||||
|
#define STM32_HSI_ENABLED TRUE |
||||||
|
#define STM32_HSI14_ENABLED TRUE |
||||||
|
#define STM32_HSI48_ENABLED FALSE |
||||||
|
#define STM32_LSI_ENABLED TRUE |
||||||
|
#define STM32_HSE_ENABLED FALSE |
||||||
|
#define STM32_LSE_ENABLED FALSE |
||||||
|
#define STM32_SW STM32_SW_PLL |
||||||
|
#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 |
||||||
|
#define STM32_PREDIV_VALUE 1 |
||||||
|
#define STM32_PLLMUL_VALUE 12 |
||||||
|
#define STM32_HPRE STM32_HPRE_DIV1 |
||||||
|
#define STM32_PPRE STM32_PPRE_DIV1 |
||||||
|
#define STM32_ADCSW STM32_ADCSW_HSI14 |
||||||
|
#define STM32_ADCPRE STM32_ADCPRE_DIV4 |
||||||
|
#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK |
||||||
|
#define STM32_ADCPRE STM32_ADCPRE_DIV4 |
||||||
|
#define STM32_ADCSW STM32_ADCSW_HSI14 |
||||||
|
#define STM32_USBSW STM32_USBSW_HSI48 |
||||||
|
#define STM32_CECSW STM32_CECSW_HSI |
||||||
|
#define STM32_I2C1SW STM32_I2C1SW_HSI |
||||||
|
#define STM32_USART1SW STM32_USART1SW_PCLK |
||||||
|
#define STM32_RTCSEL STM32_RTCSEL_LSI |
||||||
|
|
||||||
|
/*
|
||||||
|
* ADC driver system settings. |
||||||
|
*/ |
||||||
|
#define STM32_ADC_USE_ADC1 FALSE |
||||||
|
#define STM32_ADC_ADC1_DMA_PRIORITY 2 |
||||||
|
#define STM32_ADC_IRQ_PRIORITY 2 |
||||||
|
#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 |
||||||
|
|
||||||
|
/*
|
||||||
|
* EXT driver system settings. |
||||||
|
*/ |
||||||
|
#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 |
||||||
|
#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 |
||||||
|
#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 |
||||||
|
#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 |
||||||
|
#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 |
||||||
|
|
||||||
|
/*
|
||||||
|
* GPT driver system settings. |
||||||
|
*/ |
||||||
|
#define STM32_GPT_USE_TIM1 FALSE |
||||||
|
#define STM32_GPT_USE_TIM2 FALSE |
||||||
|
#define STM32_GPT_USE_TIM3 FALSE |
||||||
|
#define STM32_GPT_USE_TIM14 FALSE |
||||||
|
#define STM32_GPT_TIM1_IRQ_PRIORITY 2 |
||||||
|
#define STM32_GPT_TIM2_IRQ_PRIORITY 2 |
||||||
|
#define STM32_GPT_TIM3_IRQ_PRIORITY 2 |
||||||
|
#define STM32_GPT_TIM14_IRQ_PRIORITY 2 |
||||||
|
|
||||||
|
/*
|
||||||
|
* I2C driver system settings. |
||||||
|
*/ |
||||||
|
#define STM32_I2C_USE_I2C1 TRUE |
||||||
|
#define STM32_I2C_USE_I2C2 FALSE |
||||||
|
#define STM32_I2C_BUSY_TIMEOUT 50 |
||||||
|
#define STM32_I2C_I2C1_IRQ_PRIORITY 3 |
||||||
|
#define STM32_I2C_I2C2_IRQ_PRIORITY 3 |
||||||
|
#define STM32_I2C_USE_DMA TRUE |
||||||
|
#define STM32_I2C_I2C1_DMA_PRIORITY 1 |
||||||
|
#define STM32_I2C_I2C2_DMA_PRIORITY 1 |
||||||
|
#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) |
||||||
|
#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) |
||||||
|
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") |
||||||
|
|
||||||
|
/*
|
||||||
|
* ICU driver system settings. |
||||||
|
*/ |
||||||
|
#define STM32_ICU_USE_TIM1 FALSE |
||||||
|
#define STM32_ICU_USE_TIM2 FALSE |
||||||
|
#define STM32_ICU_USE_TIM3 FALSE |
||||||
|
#define STM32_ICU_TIM1_IRQ_PRIORITY 3 |
||||||
|
#define STM32_ICU_TIM2_IRQ_PRIORITY 3 |
||||||
|
#define STM32_ICU_TIM3_IRQ_PRIORITY 3 |
||||||
|
|
||||||
|
/*
|
||||||
|
* PWM driver system settings. |
||||||
|
*/ |
||||||
|
#define STM32_PWM_USE_ADVANCED FALSE |
||||||
|
#define STM32_PWM_USE_TIM1 FALSE |
||||||
|
#define STM32_PWM_USE_TIM2 FALSE |
||||||
|
#define STM32_PWM_USE_TIM3 TRUE |
||||||
|
#define STM32_PWM_TIM1_IRQ_PRIORITY 3 |
||||||
|
#define STM32_PWM_TIM2_IRQ_PRIORITY 3 |
||||||
|
#define STM32_PWM_TIM3_IRQ_PRIORITY 3 |
||||||
|
|
||||||
|
/*
|
||||||
|
* SERIAL driver system settings. |
||||||
|
*/ |
||||||
|
#define STM32_SERIAL_USE_USART1 FALSE |
||||||
|
#define STM32_SERIAL_USE_USART2 FALSE |
||||||
|
#define STM32_SERIAL_USART1_PRIORITY 3 |
||||||
|
#define STM32_SERIAL_USART2_PRIORITY 3 |
||||||
|
|
||||||
|
/*
|
||||||
|
* SPI driver system settings. |
||||||
|
*/ |
||||||
|
#define STM32_SPI_USE_SPI1 FALSE |
||||||
|
#define STM32_SPI_USE_SPI2 TRUE |
||||||
|
#define STM32_SPI_SPI1_DMA_PRIORITY 1 |
||||||
|
#define STM32_SPI_SPI2_DMA_PRIORITY 1 |
||||||
|
#define STM32_SPI_SPI1_IRQ_PRIORITY 2 |
||||||
|
#define STM32_SPI_SPI2_IRQ_PRIORITY 2 |
||||||
|
#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) |
||||||
|
#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) |
||||||
|
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") |
||||||
|
|
||||||
|
/*
|
||||||
|
* ST driver system settings. |
||||||
|
*/ |
||||||
|
#define STM32_ST_IRQ_PRIORITY 2 |
||||||
|
#define STM32_ST_USE_TIMER 2 |
||||||
|
|
||||||
|
/*
|
||||||
|
* UART driver system settings. |
||||||
|
*/ |
||||||
|
#define STM32_UART_USE_USART1 FALSE |
||||||
|
#define STM32_UART_USE_USART2 FALSE |
||||||
|
#define STM32_UART_USART1_IRQ_PRIORITY 3 |
||||||
|
#define STM32_UART_USART2_IRQ_PRIORITY 3 |
||||||
|
#define STM32_UART_USART1_DMA_PRIORITY 0 |
||||||
|
#define STM32_UART_USART2_DMA_PRIORITY 0 |
||||||
|
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") |
||||||
|
|
||||||
|
/*
|
||||||
|
* USB driver system settings. |
||||||
|
*/ |
||||||
|
#define STM32_USB_USE_USB1 TRUE |
||||||
|
#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE |
||||||
|
#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 |
||||||
|
|
||||||
|
#endif /* _MCUCONF_H_ */ |
||||||
@ -0,0 +1,13 @@ |
|||||||
|
# Ext65Rev2 |
||||||
|
|
||||||
|
Ext65Rev2 Keyboard |
||||||
|
|
||||||
|
* Keyboard Maintainer: [Xelus22](https://github.com/Xelus22) |
||||||
|
* Hardware Supported: Ext65Rev2 |
||||||
|
* Hardware Availability: [Keyboard Treehouse](https://keyboardtreehouse.com/collections/all/products/ext65-r2-pcb) |
||||||
|
|
||||||
|
Make example for this keyboard (after setting up your build environment): |
||||||
|
|
||||||
|
make aeboards/ext65/rev2:default |
||||||
|
|
||||||
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
||||||
@ -0,0 +1,45 @@ |
|||||||
|
#include "rev2.h" |
||||||
|
|
||||||
|
#ifdef OLED_DRIVER_ENABLE |
||||||
|
void board_init(void) { |
||||||
|
SYSCFG->CFGR1 |= SYSCFG_CFGR1_I2C1_DMA_RMP; |
||||||
|
SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_SPI2_DMA_RMP); |
||||||
|
} |
||||||
|
|
||||||
|
oled_rotation_t oled_init_user(oled_rotation_t rotation) { |
||||||
|
return OLED_ROTATION_90; // rotates the display 90 degrees
|
||||||
|
} |
||||||
|
|
||||||
|
#else |
||||||
|
|
||||||
|
void keyboard_pre_init_user(void) { |
||||||
|
// Call the keyboard pre init code.
|
||||||
|
// Set our LED pins as output
|
||||||
|
setPinOutput(B4); |
||||||
|
setPinOutput(B3); |
||||||
|
setPinOutput(A15); |
||||||
|
setPinOutput(A14); |
||||||
|
} |
||||||
|
|
||||||
|
bool led_update_kb(led_t led_state) { |
||||||
|
bool res = led_update_user(led_state); |
||||||
|
if(res) { |
||||||
|
writePin(B4, led_state.num_lock); |
||||||
|
writePin(B3, led_state.caps_lock); |
||||||
|
writePin(A15, led_state.scroll_lock); |
||||||
|
} |
||||||
|
return res; |
||||||
|
} |
||||||
|
|
||||||
|
layer_state_t layer_state_set_kb(layer_state_t state) { |
||||||
|
switch (get_highest_layer(state)) { |
||||||
|
case 1: |
||||||
|
writePinHigh(A14); |
||||||
|
break; |
||||||
|
default: // for any other layers, or the default layer
|
||||||
|
writePinLow(A14); |
||||||
|
break; |
||||||
|
} |
||||||
|
return layer_state_set_user(state); |
||||||
|
} |
||||||
|
#endif |
||||||
@ -0,0 +1,24 @@ |
|||||||
|
#pragma once |
||||||
|
|
||||||
|
#include "quantum.h" |
||||||
|
|
||||||
|
#define ____ KC_NO |
||||||
|
|
||||||
|
#define LAYOUT_ext65( \ |
||||||
|
K000, K100, K001, K101, K002, K102, K003, K103, K004, K104, K005, K105, K006, K106, K007, K107, K008, K108, K508, K009, \
|
||||||
|
K200, K300, K201, K301, K202, K302, K203, K303, K204, K304, K205, K305, K206, K306, K207, K307, K208, K308, K209, \
|
||||||
|
K400, K500, K401, K501, K402, K502, K403, K503, K404, K504, K405, K505, K406, K506, K407, K507, K408, K409, \
|
||||||
|
K600, K700, K601, K701, K602, K702, K603, K703, K604, K704, K605, K705, K606, K706, K607, K708, K608, K709, \
|
||||||
|
K800, K900, K801, K901, K802, K902, K803, K805, K906, K807, K908, K808, K909 \
|
||||||
|
) { \
|
||||||
|
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009 }, \
|
||||||
|
{ K100, K101, K102, K103, K104, K105, K106, K107, K108, ____ }, \
|
||||||
|
{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209 }, \
|
||||||
|
{ K300, K301, K302, K303, K304, K305, K306, K307, K308, ____ }, \
|
||||||
|
{ K400, K401, K402, K403, K404, K405, K406, K407, K408, K409 }, \
|
||||||
|
{ K500, K501, K502, K503, K504, K505, K506, K507, K508, ____ }, \
|
||||||
|
{ K600, K601, K602, K603, K604, K605, K606, K607, K608, ____ }, \
|
||||||
|
{ K700, K701, K702, K703, K704, K705, K706, ____, K708, K709 }, \
|
||||||
|
{ K800, K801, K802, K803, ____, K805, ____, K807, K808, ____ }, \
|
||||||
|
{ K900, K901, K902, ____, ____, ____, K906, ____, K908, K909 } \
|
||||||
|
} |
||||||
@ -0,0 +1,23 @@ |
|||||||
|
# MCU name
|
||||||
|
MCU = STM32F072
|
||||||
|
|
||||||
|
# Build Options
|
||||||
|
# comment out to disable the options.
|
||||||
|
#
|
||||||
|
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||||
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
|
CONSOLE_ENABLE = yes # Console for debug
|
||||||
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
|
SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
||||||
|
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
NKRO_ENABLE = yes # USB Nkey Rollover
|
||||||
|
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||||
|
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
|
||||||
|
BLUETOOTH_ENABLE = no # Enable Bluetooth
|
||||||
|
AUDIO_ENABLE = no # Audio output
|
||||||
|
WS2812_DRIVER = spi
|
||||||
|
|
||||||
|
# Enter lower-power sleep mode when on the ChibiOS idle thread
|
||||||
|
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
|
||||||
Loading…
Reference in new issue