Added Chimera LS and Chimera Ergo (#2335)
* Added Chimera Ortho keymap * added readme * fixed hardware link * Added KC_KEYMAP * resolving conflict * Added Chimera LS and Chimera Ergo * Added rules file * fixed rule files * Added Chimera Ortho keymap * Added KC_KEYMAP * Added Chimera LS and Chimera Ergo * fixed rule files * fixed rule files * fixed image links * Added KC_KEYMAP * Added Chimera LS and Chimera Ergo * Added Chimera Ortho keymap * fixed rule files * fixed rule files * fixed image links * Fixed KEYMAP vs KC_KEYMAPplanck_light_rev2
GlenPickle
7 years ago
committed by
Jack Humbert
parent
bfc2b1205a
commit
d1ea398fb9
@ -0,0 +1,31 @@ |
||||
#include "chimera_ergo.h" |
||||
|
||||
void uart_init(void) { |
||||
SERIAL_UART_INIT(); |
||||
} |
||||
|
||||
void led_init(void) { |
||||
DDRD |= (1<<1); |
||||
PORTD |= (1<<1); |
||||
DDRF |= (1<<4) | (1<<5); |
||||
PORTF |= (1<<4) | (1<<5); |
||||
} |
||||
|
||||
|
||||
void matrix_init_kb(void) { |
||||
// put your keyboard start-up code here
|
||||
// runs once when the firmware starts up
|
||||
matrix_init_user(); |
||||
uart_init(); |
||||
led_init(); |
||||
} |
||||
|
||||
void matrix_scan_kb(void) { |
||||
// put your looping keyboard code here
|
||||
// runs every cycle (a lot)
|
||||
matrix_scan_user(); |
||||
} |
||||
|
||||
void led_set_kb(uint8_t usb_led) { |
||||
|
||||
} |
||||
@ -0,0 +1,82 @@ |
||||
#ifndef CHIMERA_ERGO_H |
||||
#define CHIMERA_ERGO_H |
||||
|
||||
#include "quantum.h" |
||||
#include "matrix.h" |
||||
#include "backlight.h" |
||||
#include <stddef.h> |
||||
|
||||
#define red_led_off PORTF |= (1<<5) |
||||
#define red_led_on PORTF &= ~(1<<5) |
||||
#define blu_led_off PORTF |= (1<<4) |
||||
#define blu_led_on PORTF &= ~(1<<4) |
||||
#define grn_led_off PORTD |= (1<<1) |
||||
#define grn_led_on PORTD &= ~(1<<1) |
||||
|
||||
#define set_led_off red_led_off; grn_led_off; blu_led_off |
||||
#define set_led_red red_led_on; grn_led_off; blu_led_off |
||||
#define set_led_blue red_led_off; grn_led_off; blu_led_on |
||||
#define set_led_green red_led_off; grn_led_on; blu_led_off |
||||
#define set_led_yellow red_led_on; grn_led_on; blu_led_off |
||||
#define set_led_magenta red_led_on; grn_led_off; blu_led_on |
||||
#define set_led_cyan red_led_off; grn_led_on; blu_led_on |
||||
#define set_led_white red_led_on; grn_led_on; blu_led_on |
||||
|
||||
/*
|
||||
#define LED_B 5 |
||||
#define LED_R 6 |
||||
#define LED_G 7 |
||||
|
||||
#define all_leds_off PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G) |
||||
|
||||
#define red_led_on PORTF |= (1<<LED_R) |
||||
#define red_led_off PORTF &= ~(1<<LED_R) |
||||
#define grn_led_on PORTF |= (1<<LED_G) |
||||
#define grn_led_off PORTF &= ~(1<<LED_G) |
||||
#define blu_led_on PORTF |= (1<<LED_B) |
||||
#define blu_led_off PORTF &= ~(1<<LED_B) |
||||
|
||||
#define set_led_off PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G) |
||||
#define set_led_red PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_G) | (1<<LED_R) |
||||
#define set_led_blue PORTF = PORTF & ~(1<<LED_G) & ~(1<<LED_R) | (1<<LED_B) |
||||
#define set_led_green PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_R) | (1<<LED_G) |
||||
#define set_led_yellow PORTF = PORTF & ~(1<<LED_B) | (1<<LED_R) | (1<<LED_G) |
||||
#define set_led_magenta PORTF = PORTF & ~(1<<LED_G) | (1<<LED_R) | (1<<LED_B) |
||||
#define set_led_cyan PORTF = PORTF & ~(1<<LED_R) | (1<<LED_B) | (1<<LED_G) |
||||
#define set_led_white PORTF |= (1<<LED_B) | (1<<LED_R) | (1<<LED_G) |
||||
*/ |
||||
|
||||
// This a shortcut to help you visually see your layout.
|
||||
// The first section contains all of the arguements
|
||||
// The second converts the arguments into a two-dimensional array
|
||||
#define KC_KEYMAP( \ |
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, \
|
||||
k12, k13, k14, k15, k16, k17, k18, k19, k20, k21, k22, k23, \
|
||||
k24, k25, k26, k27, k28, k29, k30, k31, k32, k33, k34, k35, \
|
||||
k36, k37, k38, k39, k40, k41, k42, k43, k44, k45, k46, k47, \
|
||||
k48, k49, k50, k51 \
|
||||
) \
|
||||
{ \
|
||||
{ KC_NO, KC_NO, KC_##k26, KC_##k15, KC_##k28, KC_##k01, KC_##k42, KC_##k31, KC_##k20, KC_##k33, KC_NO, KC_NO }, \
|
||||
{ KC_##k00, KC_NO, KC_##k14, KC_##k27, KC_##k16, KC_##k36, KC_##k47, KC_##k19, KC_##k32, KC_##k21, KC_NO, KC_##k11 }, \
|
||||
{ KC_##k12, KC_##k25, KC_##k02, KC_##k39, KC_##k17, KC_##k49, KC_##k50, KC_##k18, KC_##k44, KC_##k09, KC_##k34, KC_##k23 }, \
|
||||
{ KC_##k24, KC_##k13, KC_##k38, KC_##k04, KC_##k05, KC_##k48, KC_##k51, KC_##k06, KC_##k07, KC_##k45, KC_##k22, KC_##k35 }, \
|
||||
{ KC_##k29, KC_##k41, KC_##k03, KC_##k40, KC_##k37, KC_NO, KC_##k30, KC_##k43, KC_##k08, KC_##k10, KC_##k46, KC_NO }, \
|
||||
} |
||||
|
||||
#define KEYMAP( \ |
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, \
|
||||
k12, k13, k14, k15, k16, k17, k18, k19, k20, k21, k22, k23, \
|
||||
k24, k25, k26, k27, k28, k29, k30, k31, k32, k33, k34, k35, \
|
||||
k36, k37, k38, k39, k40, k41, k42, k43, k44, k45, k46, k47, \
|
||||
k48, k49, k50, k51 \
|
||||
) \
|
||||
{ \
|
||||
{ KC_NO, KC_NO, k26, k15, k28, k01, k42, k31, k20, k33, KC_NO, KC_NO }, \
|
||||
{ k00, KC_NO, k14, k27, k16, k36, k47, k19, k32, k21, KC_NO, k11 }, \
|
||||
{ k12, k25, k02, k39, k17, k49, k50, k18, k44, k09, k34, k23 }, \
|
||||
{ k24, k13, k38, k04, k05, k48, k51, k06, k07, k45, k22, k35 }, \
|
||||
{ k29, k41, k03, k40, k37, KC_NO, k30, k43, k08, k10, k46, KC_NO }, \
|
||||
} |
||||
|
||||
#endif |
||||
@ -0,0 +1,87 @@ |
||||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com> |
||||
|
||||
This program is free software: you can redistribute it and/or modify |
||||
it under the terms of the GNU General Public License as published by |
||||
the Free Software Foundation, either version 2 of the License, or |
||||
(at your option) any later version. |
||||
|
||||
This program is distributed in the hope that it will be useful, |
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
GNU General Public License for more details. |
||||
|
||||
You should have received a copy of the GNU General Public License |
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/ |
||||
|
||||
#ifndef CONFIG_H |
||||
#define CONFIG_H |
||||
|
||||
#include "config_common.h" |
||||
|
||||
/* USB Device descriptor parameter */ |
||||
|
||||
#define VENDOR_ID 0xFEED |
||||
#define PRODUCT_ID 0x6060 |
||||
#define DEVICE_VER 0x0001 |
||||
#define MANUFACTURER unknown |
||||
#define PRODUCT Chimera Ergo |
||||
#define DESCRIPTION q.m.k. keyboard firmware for Chimera Ergo |
||||
|
||||
/* key matrix size */ |
||||
#define MATRIX_ROWS 6 |
||||
#define MATRIX_COLS 12 |
||||
|
||||
/* define if matrix has ghost */ |
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* number of backlight levels */ |
||||
//#define BACKLIGHT_LEVELS 3
|
||||
|
||||
#define ONESHOT_TIMEOUT 500 |
||||
|
||||
|
||||
/* key combination for command */ |
||||
#define IS_COMMAND() ( \ |
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
) |
||||
|
||||
/*
|
||||
* Feature disable options |
||||
* These options are also useful to firmware size reduction. |
||||
*/ |
||||
|
||||
#define PREVENT_STUCK_MODIFIERS |
||||
|
||||
/* disable debug print */ |
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */ |
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */ |
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
//UART settings for communication with the RF microcontroller
|
||||
#define SERIAL_UART_BAUD 1000000 |
||||
#define SERIAL_UART_DATA UDR1 |
||||
#define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1) |
||||
#define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1)) |
||||
#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1)) |
||||
#define SERIAL_UART_INIT() do { \ |
||||
/* baud rate */ \
|
||||
UBRR1L = SERIAL_UART_UBRR; \
|
||||
/* baud rate */ \
|
||||
UBRR1H = SERIAL_UART_UBRR >> 8; \
|
||||
/* enable TX and RX */ \
|
||||
UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
|
||||
/* 8-bit data */ \
|
||||
UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \
|
||||
} while(0) |
||||
|
||||
#endif |
||||
@ -0,0 +1,206 @@ |
||||
// this is the style you want to emulate.
|
||||
// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
|
||||
|
||||
#include "chimera_ergo.h" |
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
enum chimera_ergo_layers |
||||
{ |
||||
_QWERTY, |
||||
_CAPS, |
||||
_NUMPAD, |
||||
_SYMBOLS, |
||||
_MACROS, |
||||
_NAV |
||||
}; |
||||
|
||||
#define KC_NMPD TG(_NUMPAD) |
||||
#define KC_SYMB TG(_SYMBOLS) |
||||
#define KC_SPFN LT(_NAV,KC_EQL) |
||||
#define KC_SCTL MT(MOD_LCTL, KC_LBRC) |
||||
#define KC_SCTR MT(MOD_LCTL, KC_RBRC) |
||||
#define KC_SPLT MT(MOD_LALT, KC_MINS) |
||||
#define KC_SPRT MT(MOD_LALT, KC_1) |
||||
#define KC_GBRC MT(MOD_RGUI, KC_RBRC) |
||||
#define KC_GQOT MT(MOD_LGUI, KC_QUOT) |
||||
#define KC_MESC LT(_MACROS, KC_ESC) |
||||
#define KC_INCL M(0) |
||||
#define KC_PULL M(1) |
||||
#define KC_PUSH M(2) |
||||
#define KC_SCAP M(3) |
||||
#define KC_SCOF M(4) |
||||
#define KC_CAD LALT(LCTL(KC_DEL)) |
||||
|
||||
#define LONGPRESS_DELAY 150 |
||||
//#define LAYER_TOGGLE_DELAY 300
|
||||
|
||||
// Fillers to make layering more clear
|
||||
#define _______ KC_TRNS |
||||
#define XXXXXXX KC_NO |
||||
#define KC_ KC_TRNS |
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { |
||||
|
||||
[_QWERTY] = KC_KEYMAP( |
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
LBRC, 1 ,SCTL,SPLT,SPFN, 5 , 6 ,GBRC,SPRT,SCTR, 0 ,RBRC, |
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
MESC, Q , W , E , R , T , Y , U , I , O , P ,QUOT, |
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
TAB , A , S , D , F , G , H , J , K , L ,SCLN,ENT , |
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
LSPO, Z , X , C , V , B , N , M ,COMM,DOT ,SLSH,RSPC, |
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
NMPD,BSPC, SPC ,SYMB |
||||
// \------------------+----+----/ \---+----+----+--------------/
|
||||
), |
||||
|
||||
[_CAPS] = KC_KEYMAP( |
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
,UNDS, , , , , , , , , , , |
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , , , , , , , , , |
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , , , , , , ,COLN, , |
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
SCOF, , , , , , , , , , ,SCOF, |
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , |
||||
// \------------------+----+----/ \---+----+----+--------------/
|
||||
), |
||||
|
||||
[_NUMPAD] = KC_KEYMAP( |
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
, , , , , , , , , ,MINS, , |
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, ,COLN, , , , , 7 , 8 , 9 ,ASTR, , |
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, ,DOT , , , , , 4 , 5 , 6 ,PLUS, , |
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , , , , 1 , 2 , 3 ,SLSH, , |
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , 0 |
||||
// \------------------+----+----/ \---+----+----+--------------/
|
||||
), |
||||
|
||||
[_SYMBOLS] = KC_KEYMAP( |
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
, , , , , , , , , , , , |
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
,EXLM, AT ,HASH,DLR ,PERC, CIRC,AMPR,ASTR,LPRN,RPRN,BSLS, |
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
F1 , F2 , F3 , F4 , F5 , F6 , TILD,EQL ,UNDS,LCBR,RCBR, , |
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
F7 , F8 , F9 ,F10 ,F11 ,F12 , GRV ,PLUS,MINS,LBRC,RBRC, , |
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
PIPE, , , |
||||
// \------------------+----+----/ \---+----+----+--------------/
|
||||
), |
||||
|
||||
[_MACROS] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
, , , , , , , , , , , , |
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , , , , ,INCL, , , , |
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , ,CAD , , , , , , , , , |
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
SCAP, , , , , , , ,PULL,PUSH, , , |
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , ,
|
||||
// \------------------+----+----/ \---+----+----+--------------/
|
||||
), |
||||
|
||||
[_NAV] = KC_KEYMAP(
|
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
, , , , , , , , , , , , |
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , , , ,PGUP, UP ,PGDN,PSCR, , |
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , , , ,LEFT,DOWN,RGHT, , , |
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , , , , , , , , , |
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
,DEL , ,
|
||||
// \------------------+----+----/ \---+----+----+--------------/
|
||||
), |
||||
|
||||
|
||||
}; |
||||
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = { |
||||
|
||||
}; |
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) |
||||
{ |
||||
switch(id) { |
||||
/* include some kind of library or header */ |
||||
case 0: |
||||
if (record->event.pressed) { |
||||
SEND_STRING("#include <>"); |
||||
return MACRO( T(LEFT), END); |
||||
} |
||||
break; |
||||
case 1: |
||||
if (record->event.pressed) { |
||||
SEND_STRING("git pull"); |
||||
return MACRO( T(ENT), END ); |
||||
} |
||||
break; |
||||
case 2: |
||||
if (record->event.pressed){ |
||||
SEND_STRING("git push"); |
||||
return MACRO( T(ENT), END ); |
||||
} |
||||
break; |
||||
case 3: |
||||
if (record->event.pressed){ |
||||
layer_on(_CAPS); |
||||
register_code(KC_CAPSLOCK); |
||||
unregister_code(KC_CAPSLOCK); |
||||
} |
||||
break; |
||||
case 4: |
||||
if (record->event.pressed){ |
||||
layer_off(_CAPS); |
||||
register_code(KC_CAPSLOCK); |
||||
unregister_code(KC_CAPSLOCK); |
||||
} |
||||
break; |
||||
} |
||||
return MACRO_NONE; |
||||
}; |
||||
|
||||
|
||||
void matrix_scan_user(void) { |
||||
uint8_t layer = biton32(layer_state); |
||||
|
||||
switch (layer) { |
||||
case _QWERTY: |
||||
set_led_green; |
||||
break; |
||||
case _CAPS: |
||||
set_led_white; |
||||
break; |
||||
case _NUMPAD: |
||||
set_led_blue; |
||||
break; |
||||
case _SYMBOLS: |
||||
set_led_red; |
||||
break; |
||||
case _NAV: |
||||
set_led_magenta; |
||||
break; |
||||
case _MACROS: |
||||
set_led_cyan; |
||||
break; |
||||
default: |
||||
set_led_green; |
||||
break; |
||||
} |
||||
}; |
||||
@ -0,0 +1,164 @@ |
||||
/*
|
||||
Copyright 2012 Jun Wako |
||||
Copyright 2014 Jack Humbert |
||||
|
||||
This program is free software: you can redistribute it and/or modify |
||||
it under the terms of the GNU General Public License as published by |
||||
the Free Software Foundation, either version 2 of the License, or |
||||
(at your option) any later version. |
||||
|
||||
This program is distributed in the hope that it will be useful, |
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
GNU General Public License for more details. |
||||
|
||||
You should have received a copy of the GNU General Public License |
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/ |
||||
#include <stdint.h> |
||||
#include <stdbool.h> |
||||
#if defined(__AVR__) |
||||
#include <avr/io.h> |
||||
#endif |
||||
#include "wait.h" |
||||
#include "print.h" |
||||
#include "debug.h" |
||||
#include "util.h" |
||||
#include "matrix.h" |
||||
#include "timer.h" |
||||
|
||||
#if (MATRIX_COLS <= 8) |
||||
# define print_matrix_header() print("\nr/c 01234567\n") |
||||
# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) |
||||
# define matrix_bitpop(i) bitpop(matrix[i]) |
||||
# define ROW_SHIFTER ((uint8_t)1) |
||||
#elif (MATRIX_COLS <= 16) |
||||
# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n") |
||||
# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row)) |
||||
# define matrix_bitpop(i) bitpop16(matrix[i]) |
||||
# define ROW_SHIFTER ((uint16_t)1) |
||||
#elif (MATRIX_COLS <= 32) |
||||
# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n") |
||||
# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row)) |
||||
# define matrix_bitpop(i) bitpop32(matrix[i]) |
||||
# define ROW_SHIFTER ((uint32_t)1) |
||||
#endif |
||||
|
||||
/* matrix state(1:on, 0:off) */ |
||||
static matrix_row_t matrix[MATRIX_ROWS]; |
||||
|
||||
__attribute__ ((weak)) |
||||
void matrix_init_quantum(void) { |
||||
matrix_init_kb(); |
||||
} |
||||
|
||||
__attribute__ ((weak)) |
||||
void matrix_scan_quantum(void) { |
||||
matrix_scan_kb(); |
||||
} |
||||
|
||||
__attribute__ ((weak)) |
||||
void matrix_init_kb(void) { |
||||
matrix_init_user(); |
||||
} |
||||
|
||||
__attribute__ ((weak)) |
||||
void matrix_scan_kb(void) { |
||||
matrix_scan_user(); |
||||
} |
||||
|
||||
__attribute__ ((weak)) |
||||
void matrix_init_user(void) { |
||||
} |
||||
|
||||
__attribute__ ((weak)) |
||||
void matrix_scan_user(void) { |
||||
} |
||||
|
||||
inline |
||||
uint8_t matrix_rows(void) { |
||||
return MATRIX_ROWS; |
||||
} |
||||
|
||||
inline |
||||
uint8_t matrix_cols(void) { |
||||
return MATRIX_COLS; |
||||
} |
||||
|
||||
void matrix_init(void) { |
||||
|
||||
matrix_init_quantum(); |
||||
} |
||||
|
||||
uint8_t matrix_scan(void) |
||||
{ |
||||
SERIAL_UART_INIT(); |
||||
|
||||
uint32_t timeout = 0; |
||||
|
||||
//the s character requests the RF slave to send the matrix
|
||||
SERIAL_UART_DATA = 's'; |
||||
|
||||
//trust the external keystates entirely, erase the last data
|
||||
uint8_t uart_data[14] = {0}; |
||||
|
||||
//there are 10 bytes corresponding to 10 columns, and an end byte
|
||||
for (uint8_t i = 0; i < 14; i++) { |
||||
//wait for the serial data, timeout if it's been too long
|
||||
//this only happened in testing with a loose wire, but does no
|
||||
//harm to leave it in here
|
||||
while(!SERIAL_UART_RXD_PRESENT){ |
||||
timeout++; |
||||
if (timeout > 10000){ |
||||
break; |
||||
} |
||||
}
|
||||
uart_data[i] = SERIAL_UART_DATA; |
||||
} |
||||
|
||||
//check for the end packet, the key state bytes use the LSBs, so 0xE0
|
||||
//will only show up here if the correct bytes were recieved
|
||||
if (uart_data[10] == 0xE0) |
||||
{ |
||||
//shifting and transferring the keystates to the QMK matrix variable
|
||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) { |
||||
matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 6; |
||||
} |
||||
} |
||||
|
||||
|
||||
matrix_scan_quantum(); |
||||
return 1; |
||||
} |
||||
|
||||
inline |
||||
bool matrix_is_on(uint8_t row, uint8_t col) |
||||
{ |
||||
return (matrix[row] & ((matrix_row_t)1<col)); |
||||
} |
||||
|
||||
inline |
||||
matrix_row_t matrix_get_row(uint8_t row) |
||||
{ |
||||
return matrix[row]; |
||||
} |
||||
|
||||
void matrix_print(void) |
||||
{ |
||||
print_matrix_header(); |
||||
|
||||
for (uint8_t row = 0; row < MATRIX_ROWS; row++) { |
||||
phex(row); print(": "); |
||||
print_matrix_row(row); |
||||
print("\n"); |
||||
} |
||||
} |
||||
|
||||
uint8_t matrix_key_count(void) |
||||
{ |
||||
uint8_t count = 0; |
||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) { |
||||
count += matrix_bitpop(i); |
||||
} |
||||
return count; |
||||
} |
||||
@ -0,0 +1,19 @@ |
||||
# Chimera Ergo |
||||
|
||||
 |
||||
|
||||
A split wireless 40% ergonomic keyboard |
||||
|
||||
Keyboard Maintainer: [William Wilson](https://github.com/GlenPickle) |
||||
|
||||
|
||||
Hardware Supported: Chimera Ergo PCB, WaveShare core nRF51822 |
||||
|
||||
Hardware Availability: [Gerbers](https://github.com/GlenPickle/Chimera/tree/master/ergo/gerbers) |
||||
|
||||
Make example for this keyboard (after setting up your build environment): |
||||
|
||||
make chimera_ergo:default |
||||
|
||||
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. |
||||
|
||||
@ -0,0 +1,82 @@ |
||||
|
||||
OPT_DEFS += -DCHIMERA_ERGO_PROMICRO
|
||||
CHIMERA_ERGO_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
|
||||
avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
|
||||
|
||||
# # project specific files
|
||||
SRC = matrix.c
|
||||
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Bootloader
|
||||
# This definition is optional, and if your keyboard supports multiple bootloaders of
|
||||
# different sizes, comment this out, and the correct address will be loaded
|
||||
# automatically (+60). See bootloader.mk for all options.
|
||||
BOOTLOADER = caterina
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
|
||||
# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||
# MIDI_ENABLE = YES # MIDI controls
|
||||
UNICODE_ENABLE = YES # Unicode
|
||||
# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
|
||||
USB = /dev/ttyACM0
|
||||
@ -0,0 +1,31 @@ |
||||
#include "chimera_ls.h" |
||||
|
||||
void uart_init(void) { |
||||
SERIAL_UART_INIT(); |
||||
} |
||||
|
||||
void led_init(void) { |
||||
DDRD |= (1<<1); |
||||
PORTD |= (1<<1); |
||||
DDRF |= (1<<4) | (1<<5); |
||||
PORTF |= (1<<4) | (1<<5); |
||||
} |
||||
|
||||
|
||||
void matrix_init_kb(void) { |
||||
// put your keyboard start-up code here
|
||||
// runs once when the firmware starts up
|
||||
matrix_init_user(); |
||||
uart_init(); |
||||
led_init(); |
||||
} |
||||
|
||||
void matrix_scan_kb(void) { |
||||
// put your looping keyboard code here
|
||||
// runs every cycle (a lot)
|
||||
matrix_scan_user(); |
||||
} |
||||
|
||||
void led_set_kb(uint8_t usb_led) { |
||||
|
||||
} |
||||
@ -0,0 +1,82 @@ |
||||
#ifndef CHIMERA_LETS_SPLIT_H |
||||
#define CHIMERA_LETS_SPLIT_H |
||||
|
||||
#include "quantum.h" |
||||
#include "matrix.h" |
||||
#include "backlight.h" |
||||
#include <stddef.h> |
||||
|
||||
#define red_led_off PORTF |= (1<<5) |
||||
#define red_led_on PORTF &= ~(1<<5) |
||||
#define blu_led_off PORTF |= (1<<4) |
||||
#define blu_led_on PORTF &= ~(1<<4) |
||||
#define grn_led_off PORTD |= (1<<1) |
||||
#define grn_led_on PORTD &= ~(1<<1) |
||||
|
||||
#define set_led_off red_led_off; grn_led_off; blu_led_off |
||||
#define set_led_red red_led_on; grn_led_off; blu_led_off |
||||
#define set_led_blue red_led_off; grn_led_off; blu_led_on |
||||
#define set_led_green red_led_off; grn_led_on; blu_led_off |
||||
#define set_led_yellow red_led_on; grn_led_on; blu_led_off |
||||
#define set_led_magenta red_led_on; grn_led_off; blu_led_on |
||||
#define set_led_cyan red_led_off; grn_led_on; blu_led_on |
||||
#define set_led_white red_led_on; grn_led_on; blu_led_on |
||||
|
||||
/*
|
||||
#define LED_B 5 |
||||
#define LED_R 6 |
||||
#define LED_G 7 |
||||
|
||||
#define all_leds_off PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G) |
||||
|
||||
#define red_led_on PORTF |= (1<<LED_R) |
||||
#define red_led_off PORTF &= ~(1<<LED_R) |
||||
#define grn_led_on PORTF |= (1<<LED_G) |
||||
#define grn_led_off PORTF &= ~(1<<LED_G) |
||||
#define blu_led_on PORTF |= (1<<LED_B) |
||||
#define blu_led_off PORTF &= ~(1<<LED_B) |
||||
|
||||
#define set_led_off PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G) |
||||
#define set_led_red PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_G) | (1<<LED_R) |
||||
#define set_led_blue PORTF = PORTF & ~(1<<LED_G) & ~(1<<LED_R) | (1<<LED_B) |
||||
#define set_led_green PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_R) | (1<<LED_G) |
||||
#define set_led_yellow PORTF = PORTF & ~(1<<LED_B) | (1<<LED_R) | (1<<LED_G) |
||||
#define set_led_magenta PORTF = PORTF & ~(1<<LED_G) | (1<<LED_R) | (1<<LED_B) |
||||
#define set_led_cyan PORTF = PORTF & ~(1<<LED_R) | (1<<LED_B) | (1<<LED_G) |
||||
#define set_led_white PORTF |= (1<<LED_B) | (1<<LED_R) | (1<<LED_G) |
||||
*/ |
||||
|
||||
// This a shortcut to help you visually see your layout.
|
||||
// The first section contains all of the arguements
|
||||
// The second converts the arguments into a two-dimensional array
|
||||
|
||||
#define KC_KEYMAP( \ |
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, \
|
||||
k12, k13, k14, k15, k16, k17, k18, k19, k20, k21, k22, k23, \
|
||||
k24, k25, k26, k27, k28, k29, k30, k31, k32, k33, k34, k35, \
|
||||
k36, k37, k38, k39, k40, k41, k42, k43, k44, k45, k46, k47 \
|
||||
) \
|
||||
{ \
|
||||
{ KC_##k43, KC_##k45, KC_##k34, KC_##k11, KC_##k23, KC_##k40, KC_##k38, KC_##k25, KC_##k00, KC_##k12 }, \
|
||||
{ KC_##k31, KC_##k44, KC_##k46, KC_##k35, KC_##k22, KC_##k28, KC_##k39, KC_##k37, KC_##k24, KC_##k13 }, \
|
||||
{ KC_##k30, KC_##k32, KC_##k33, KC_##k47, KC_##k09, KC_##k29, KC_##k27, KC_##k26, KC_##k36, KC_##k02 }, \
|
||||
{ KC_##k19, KC_##k20, KC_##k21, KC_##k42, KC_##k18, KC_##k16, KC_##k15, KC_##k14, KC_##k41, KC_##k17 }, \
|
||||
{ KC_##k06, KC_##k07, KC_##k08, KC_##k10, KC_NO, KC_##k05, KC_##k04, KC_##k03, KC_##k01, KC_NO }, \
|
||||
} |
||||
|
||||
#define KEYMAP( \ |
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, \
|
||||
k12, k13, k14, k15, k16, k17, k18, k19, k20, k21, k22, k23, \
|
||||
k24, k25, k26, k27, k28, k29, k30, k31, k32, k33, k34, k35, \
|
||||
k36, k37, k38, k39, k40, k41, k42, k43, k44, k45, k46, k47 \
|
||||
) \
|
||||
{ \
|
||||
{ k43, k45, k34, k11, k23, k40, k38, k25, k00, k12 }, \
|
||||
{ k31, k44, k46, k35, k22, k28, k39, k37, k24, k13 }, \
|
||||
{ k30, k32, k33, k47, k09, k29, k27, k26, k36, k02 }, \
|
||||
{ k19, k20, k21, k42, k18, k16, k15, k14, k41, k17 }, \
|
||||
{ k06, k07, k08, k10, KC_NO, k05, k04, k03, k01, KC_NO }, \
|
||||
} |
||||
|
||||
|
||||
#endif |
||||
@ -0,0 +1,87 @@ |
||||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com> |
||||
|
||||
This program is free software: you can redistribute it and/or modify |
||||
it under the terms of the GNU General Public License as published by |
||||
the Free Software Foundation, either version 2 of the License, or |
||||
(at your option) any later version. |
||||
|
||||
This program is distributed in the hope that it will be useful, |
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
GNU General Public License for more details. |
||||
|
||||
You should have received a copy of the GNU General Public License |
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/ |
||||
|
||||
#ifndef CONFIG_H |
||||
#define CONFIG_H |
||||
|
||||
#include "config_common.h" |
||||
|
||||
/* USB Device descriptor parameter */ |
||||
|
||||
#define VENDOR_ID 0xFEED |
||||
#define PRODUCT_ID 0x6060 |
||||
#define DEVICE_VER 0x0001 |
||||
#define MANUFACTURER unknown |
||||
#define PRODUCT Chimera Lets Split |
||||
#define DESCRIPTION q.m.k. keyboard firmware for Chimera Lets Split |
||||
|
||||
/* key matrix size */ |
||||
#define MATRIX_ROWS 5 |
||||
#define MATRIX_COLS 12 |
||||
|
||||
/* define if matrix has ghost */ |
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* number of backlight levels */ |
||||
//#define BACKLIGHT_LEVELS 3
|
||||
|
||||
#define ONESHOT_TIMEOUT 500 |
||||
|
||||
|
||||
/* key combination for command */ |
||||
#define IS_COMMAND() ( \ |
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
) |
||||
|
||||
/*
|
||||
* Feature disable options |
||||
* These options are also useful to firmware size reduction. |
||||
*/ |
||||
|
||||
#define PREVENT_STUCK_MODIFIERS |
||||
|
||||
/* disable debug print */ |
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */ |
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */ |
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
//UART settings for communication with the RF microcontroller
|
||||
#define SERIAL_UART_BAUD 1000000 |
||||
#define SERIAL_UART_DATA UDR1 |
||||
#define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1) |
||||
#define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1)) |
||||
#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1)) |
||||
#define SERIAL_UART_INIT() do { \ |
||||
/* baud rate */ \
|
||||
UBRR1L = SERIAL_UART_UBRR; \
|
||||
/* baud rate */ \
|
||||
UBRR1H = SERIAL_UART_UBRR >> 8; \
|
||||
/* enable TX and RX */ \
|
||||
UCSR1B = _BV(TXEN1) | _BV(RXEN1); \
|
||||
/* 8-bit data */ \
|
||||
UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \
|
||||
} while(0) |
||||
|
||||
#endif |
||||
@ -0,0 +1,191 @@ |
||||
// this is the style you want to emulate.
|
||||
// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
|
||||
|
||||
#include "chimera_ls.h" |
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
enum chimera_lets_split_layers |
||||
{ |
||||
_QWERTY, |
||||
_CAPS, |
||||
_NUMPAD, |
||||
_SYMBOLS, |
||||
_MACROS, |
||||
_NAV |
||||
}; |
||||
|
||||
#define KC_NMPD TG(_NUMPAD) |
||||
#define KC_SYMB TG(_SYMBOLS) |
||||
#define KC_SPFN LT(_NAV,KC_EQL) |
||||
#define KC_SCTL MT(MOD_LCTL, KC_BSLS) |
||||
#define KC_SCTR MT(MOD_LCTL, KC_RBRC) |
||||
#define KC_SPLT MT(MOD_LALT, KC_MINS) |
||||
#define KC_MESC LT(_MACROS, KC_ESC) |
||||
#define KC_INCL M(0) |
||||
#define KC_PULL M(1) |
||||
#define KC_PUSH M(2) |
||||
#define KC_SCAP M(3) |
||||
#define KC_SCOF M(4) |
||||
#define KC_CAD LALT(LCTL(KC_DEL)) |
||||
|
||||
#define LONGPRESS_DELAY 150 |
||||
//#define LAYER_TOGGLE_DELAY 300
|
||||
|
||||
// Fillers to make layering more clear
|
||||
#define _______ KC_TRNS |
||||
#define XXXXXXX KC_NO |
||||
#define KC_ KC_TRNS |
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { |
||||
|
||||
[_QWERTY] = KC_KEYMAP( |
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
MESC, Q , W , E , R , T , Y , U , I , O , P ,BSPC, |
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
TAB , A , S , D , F , G , H , J , K , L ,SCLN, ENT, |
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
LSPO, Z , X , C , V , B , N , M ,COMM,DOT ,SLSH,RSPC, |
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
SCTL,SPFN,SPLT,AMPR,NMPD,SPC , SPC ,SYMB,ASTR,EXLM,LBRC,SCTR |
||||
//`----+----+----+----+----+----' `----+----+----+----+----+----'
|
||||
), |
||||
|
||||
[_CAPS] = KC_KEYMAP( |
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
, , , , , , , , , , , , |
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , , , , , , ,COLN, , |
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , , , , , , , , , |
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, ,UNDS, , , , , , , , ,
|
||||
//`----+----+----+----+----+----' `----+----+----+----+----+----'
|
||||
), |
||||
|
||||
|
||||
[_NUMPAD] = KC_KEYMAP( |
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
, , , , , , , 7 , 8 , 9 ,MINS,QUOT, |
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , , , , 4 , 5 , 6 ,PLUS, ENT, |
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
LSFT, , , , , , , 1 , 2 , 3 ,ASTR, EQL, |
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , ,BSPC, SPC , 0 , 0 , DOT,SLSH,
|
||||
//`----+----+----+----+----+----' `----+----+----+----+----+----'
|
||||
), |
||||
|
||||
[_SYMBOLS] = KC_KEYMAP( |
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
,EXLM, AT ,HASH,DLR ,PERC, CIRC,AMPR,ASTR,LPRN,RPRN,QUOT, |
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
F1 , F2 , F3 , F4 , F5 , F6 , TILD,EQL ,UNDS,LCBR,RCBR,PIPE, |
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
F7 , F8 , F9 , F10, F11, F12, GRV ,PLUS,MINS,LBRC,RBRC,BSLS, |
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , NO ,BSPC, SPC , , , , ,
|
||||
//`----+----+----+----+----+----' `----+----+----+----+----+----'
|
||||
), |
||||
|
||||
[_NAV] = KC_KEYMAP( |
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
, , , , DEL,BSPC, ,HOME, UP , END, INS,PSCR, |
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , ,LSFT,LCTL, ENT, ,LEFT,DOWN,RGHT, DEL, , |
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , , , ,PGUP,PGDN, , , , |
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , ,DEL , , , , , ,
|
||||
//`----+----+----+----+----+----' `----+----+----+----+----+----'
|
||||
), |
||||
|
||||
[_MACROS] = KC_KEYMAP( |
||||
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
|
||||
, , , , , , , ,INCL, , , , |
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , ,CAD , , , , , , , , , |
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
SCAP, , , , , , , ,PULL,PUSH, ,SCAP, |
||||
//|----+----+----+----+----+----| |----+----+----+----+----+----|
|
||||
, , , , , , , , , , ,
|
||||
//`----+----+----+----+----+----' `----+----+----+----+----+----'
|
||||
), |
||||
|
||||
}; |
||||
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = { |
||||
|
||||
}; |
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) |
||||
{ |
||||
switch(id) { |
||||
/* include some kind of library or header */ |
||||
case 0: |
||||
if (record->event.pressed) { |
||||
SEND_STRING("#include <>"); |
||||
return MACRO( T(LEFT), END); |
||||
} |
||||
break; |
||||
case 1: |
||||
if (record->event.pressed) { |
||||
SEND_STRING("git pull"); |
||||
return MACRO( T(ENT), END ); |
||||
} |
||||
break; |
||||
case 2: |
||||
if (record->event.pressed){ |
||||
SEND_STRING("git push"); |
||||
return MACRO( T(ENT), END ); |
||||
} |
||||
break; |
||||
case 3: |
||||
if (record->event.pressed){ |
||||
layer_on(_CAPS); |
||||
register_code(KC_CAPSLOCK); |
||||
unregister_code(KC_CAPSLOCK); |
||||
} |
||||
break; |
||||
case 4: |
||||
if (record->event.pressed){ |
||||
layer_off(_CAPS); |
||||
register_code(KC_CAPSLOCK); |
||||
unregister_code(KC_CAPSLOCK); |
||||
} |
||||
break; |
||||
} |
||||
return MACRO_NONE; |
||||
}; |
||||
|
||||
|
||||
void matrix_scan_user(void) { |
||||
uint8_t layer = biton32(layer_state); |
||||
|
||||
switch (layer) { |
||||
case _QWERTY: |
||||
set_led_green; |
||||
break; |
||||
case _CAPS: |
||||
set_led_white; |
||||
break; |
||||
case _NUMPAD: |
||||
set_led_blue; |
||||
break; |
||||
case _SYMBOLS: |
||||
set_led_red; |
||||
break; |
||||
case _NAV: |
||||
set_led_magenta; |
||||
break; |
||||
case _MACROS: |
||||
set_led_cyan; |
||||
break; |
||||
default: |
||||
set_led_green; |
||||
break; |
||||
} |
||||
}; |
||||
@ -0,0 +1,168 @@ |
||||
/*
|
||||
Copyright 2012 Jun Wako |
||||
Copyright 2014 Jack Humbert |
||||
|
||||
This program is free software: you can redistribute it and/or modify |
||||
it under the terms of the GNU General Public License as published by |
||||
the Free Software Foundation, either version 2 of the License, or |
||||
(at your option) any later version. |
||||
|
||||
This program is distributed in the hope that it will be useful, |
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
GNU General Public License for more details. |
||||
|
||||
You should have received a copy of the GNU General Public License |
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/ |
||||
#include <stdint.h> |
||||
#include <stdbool.h> |
||||
#if defined(__AVR__) |
||||
#include <avr/io.h> |
||||
#endif |
||||
#include "wait.h" |
||||
#include "print.h" |
||||
#include "debug.h" |
||||
#include "util.h" |
||||
#include "matrix.h" |
||||
#include "timer.h" |
||||
|
||||
#if (MATRIX_COLS <= 8) |
||||
# define print_matrix_header() print("\nr/c 01234567\n") |
||||
# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) |
||||
# define matrix_bitpop(i) bitpop(matrix[i]) |
||||
# define ROW_SHIFTER ((uint8_t)1) |
||||
#elif (MATRIX_COLS <= 16) |
||||
# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n") |
||||
# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row)) |
||||
# define matrix_bitpop(i) bitpop16(matrix[i]) |
||||
# define ROW_SHIFTER ((uint16_t)1) |
||||
#elif (MATRIX_COLS <= 32) |
||||
# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n") |
||||
# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row)) |
||||
# define matrix_bitpop(i) bitpop32(matrix[i]) |
||||
# define ROW_SHIFTER ((uint32_t)1) |
||||
#elif (MATRIX_COLS <= 64) |
||||
# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF0123456789ABCDEF\n") |
||||
# define print_matrix_row(row) print_bin_reverse64(matrix_get_row(row)) |
||||
# define matrix_bitpop(i) bitpop64(matrix[i]) |
||||
# define ROW_SHIFTER ((uint64_t)1) |
||||
#endif |
||||
|
||||
/* matrix state(1:on, 0:off) */ |
||||
static matrix_row_t matrix[MATRIX_ROWS]; |
||||
|
||||
__attribute__ ((weak)) |
||||
void matrix_init_quantum(void) { |
||||
matrix_init_kb(); |
||||
} |
||||
|
||||
__attribute__ ((weak)) |
||||
void matrix_scan_quantum(void) { |
||||
matrix_scan_kb(); |
||||
} |
||||
|
||||
__attribute__ ((weak)) |
||||
void matrix_init_kb(void) { |
||||
matrix_init_user(); |
||||
} |
||||
|
||||
__attribute__ ((weak)) |
||||
void matrix_scan_kb(void) { |
||||
matrix_scan_user(); |
||||
} |
||||
|
||||
__attribute__ ((weak)) |
||||
void matrix_init_user(void) { |
||||
} |
||||
|
||||
__attribute__ ((weak)) |
||||
void matrix_scan_user(void) { |
||||
} |
||||
|
||||
inline |
||||
uint8_t matrix_rows(void) { |
||||
return MATRIX_ROWS; |
||||
} |
||||
|
||||
inline |
||||
uint8_t matrix_cols(void) { |
||||
return MATRIX_COLS; |
||||
} |
||||
|
||||
void matrix_init(void) { |
||||
matrix_init_quantum(); |
||||
} |
||||
|
||||
uint8_t matrix_scan(void) |
||||
{ |
||||
SERIAL_UART_INIT(); |
||||
|
||||
uint32_t timeout = 0; |
||||
|
||||
//the s character requests the RF slave to send the matrix
|
||||
SERIAL_UART_DATA = 's'; |
||||
|
||||
//trust the external keystates entirely, erase the last data
|
||||
uint8_t uart_data[11] = {0}; |
||||
|
||||
//there are 10 bytes corresponding to 10 columns, and an end byte
|
||||
for (uint8_t i = 0; i < 11; i++) { |
||||
//wait for the serial data, timeout if it's been too long
|
||||
//this only happened in testing with a loose wire, but does no
|
||||
//harm to leave it in here
|
||||
while(!SERIAL_UART_RXD_PRESENT){ |
||||
timeout++; |
||||
if (timeout > 10000){ |
||||
break; |
||||
} |
||||
}
|
||||
uart_data[i] = SERIAL_UART_DATA; |
||||
} |
||||
|
||||
//check for the end packet, the key state bytes use the LSBs, so 0xE0
|
||||
//will only show up here if the correct bytes were recieved
|
||||
if (uart_data[10] == 0xE0) |
||||
{ |
||||
//shifting and transferring the keystates to the QMK matrix variable
|
||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) { |
||||
matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 5; |
||||
} |
||||
} |
||||
|
||||
|
||||
matrix_scan_quantum(); |
||||
return 1; |
||||
} |
||||
|
||||
inline |
||||
bool matrix_is_on(uint8_t row, uint8_t col) |
||||
{ |
||||
return (matrix[row] & ((matrix_row_t)1<col)); |
||||
} |
||||
|
||||
inline |
||||
matrix_row_t matrix_get_row(uint8_t row) |
||||
{ |
||||
return matrix[row]; |
||||
} |
||||
|
||||
void matrix_print(void) |
||||
{ |
||||
print_matrix_header(); |
||||
|
||||
for (uint8_t row = 0; row < MATRIX_ROWS; row++) { |
||||
phex(row); print(": "); |
||||
print_matrix_row(row); |
||||
print("\n"); |
||||
} |
||||
} |
||||
|
||||
uint8_t matrix_key_count(void) |
||||
{ |
||||
uint8_t count = 0; |
||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) { |
||||
count += matrix_bitpop(i); |
||||
} |
||||
return count; |
||||
} |
||||
@ -0,0 +1,19 @@ |
||||
# Chimera LS |
||||
|
||||
 |
||||
|
||||
A wireless version of the let's split: a split 40% ortholinear keyboard |
||||
|
||||
Keyboard Maintainer: [William Wilson](https://github.com/GlenPickle) |
||||
|
||||
|
||||
Hardware Supported: Chimera LS PCB, WaveShare core nRF51822 |
||||
|
||||
Hardware Availability: [Gerbers](https://github.com/GlenPickle/Chimera/tree/master/ls/gerbers) |
||||
|
||||
Make example for this keyboard (after setting up your build environment): |
||||
|
||||
make chimera_ls:default |
||||
|
||||
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. |
||||
|
||||
@ -0,0 +1,82 @@ |
||||
|
||||
OPT_DEFS += -DCHIMERA_LS_PROMICRO
|
||||
CHIMERA_LS_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \
|
||||
avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB)
|
||||
|
||||
# # project specific files
|
||||
SRC = matrix.c
|
||||
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Bootloader
|
||||
# This definition is optional, and if your keyboard supports multiple bootloaders of
|
||||
# different sizes, comment this out, and the correct address will be loaded
|
||||
# automatically (+60). See bootloader.mk for all options.
|
||||
BOOTLOADER = caterina
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
|
||||
# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||
# MIDI_ENABLE = YES # MIDI controls
|
||||
UNICODE_ENABLE = YES # Unicode
|
||||
# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
|
||||
USB = /dev/ttyACM0
|
||||
Loading…
Reference in new issue