Merge remote-tracking branch 'origin/master' into develop

keyboards/bastardkb/charybdis/3x5/v2/splinky/config.h

@@ -1,37 +0,0 @@
-/*
- * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-/* Key matrix configuration. */
-#define MATRIX_ROW_PINS \
-    { GP26, GP5, GP4, GP9 }
-
-/* serial.c configuration (for split keyboard). */
-#define SOFT_SERIAL_PIN GP1
-
-/* RGB settings. */
-#define RGB_DI_PIN GP0
-
-/* SPI & PMW3360 settings. */
-#define SPI_DRIVER SPID0
-#define SPI_MISO_PIN GP20
-
-/* Reset. */
-#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET
-#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_LED GP17
-#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 1000U

keyboards/bastardkb/charybdis/3x5/v2/splinky/readme.md

@@ -1,6 +0,0 @@
-# Splinky controller
-
-The splinky is a Pro-Micro/Elite-C replacement with USB-C and RP2040.
-
-See https://github.com/plut0nium/0xB2/#releases to figure out the right version
-for you (v2 and v3) supported.

keyboards/bastardkb/charybdis/3x5/v2/splinky/v2/rules.mk

@@ -1,2 +0,0 @@
-# Intentionally blank so that QMK detects this folder as a valid keyboard
-# parameter.

keyboards/bastardkb/charybdis/3x5/v2/splinky/v3/rules.mk

@@ -1,2 +0,0 @@
-# Intentionally blank so that QMK detects this folder as a valid keyboard
-# parameter.

keyboards/bastardkb/charybdis/3x5/v2/splinky_2/config.h

@@ -20,6 +20,16 @@
 /* Key matrix configuration. */
 #define MATRIX_ROW_PINS \
     { GP26, GP5, GP4, GP9 }
+#define MATRIX_COL_PINS \
+    { GP28, GP15, GP6, GP7, GP8 }
+
+/* Handedness. */
+#define MASTER_RIGHT
+
+// To use the handedness pin, resistors need to be installed on the adapter PCB.
+// If so, uncomment the following code, and undefine MASTER_RIGHT above.
+// #define SPLIT_HAND_PIN GP13
+// #define SPLIT_HAND_PIN_LOW_IS_LEFT  // High -> right, Low -> left.
 
 /* serial.c configuration (for split keyboard). */
 #define SOFT_SERIAL_PIN GP1
@@ -29,7 +39,10 @@
 
 /* SPI & PMW3360 settings. */
 #define SPI_DRIVER SPID0
+#define SPI_SCK_PIN GP18
 #define SPI_MISO_PIN GP20
+#define SPI_MOSI_PIN GP19
+#define POINTING_DEVICE_CS_PIN GP14
 
 /* Reset. */
 #define RP2040_BOOTLOADER_DOUBLE_TAP_RESET

keyboards/bastardkb/charybdis/3x5/v2/splinky_2/readme.md

@@ -0,0 +1,5 @@
+# Splinky controller
+
+The splinky is a Pro-Micro/Elite-C replacement with USB-C and RP2040.
+
+See [plut0nium/0xB2](https://github.com/plut0nium/0xB2/#releases) to figure out the right version for you (v2 or v3).

keyboards/bastardkb/charybdis/3x5/v2/splinky_2/rules.mk

@@ -35,5 +35,3 @@ POINTING_DEVICE_DRIVER = pmw3360
 
 SERIAL_DRIVER = vendor
 WS2812_DRIVER = vendor
-
-DEFAULT_FOLDER = bastardkb/charybdis/3x5/v2/splinky/v3

keyboards/bastardkb/charybdis/3x5/v2/splinky_3/config.h

@@ -0,0 +1,50 @@
+/*
+ * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/* Key matrix configuration. */
+#define MATRIX_ROW_PINS \
+    { GP26, GP5, GP4, GP9 }
+#define MATRIX_COL_PINS \
+    { GP28, GP21, GP6, GP7, GP8 }
+
+/* Handedness. */
+#define MASTER_RIGHT
+
+// To use the handedness pin, resistors need to be installed on the adapter PCB.
+// If so, uncomment the following code, and undefine MASTER_RIGHT above.
+// #define SPLIT_HAND_PIN GP15
+// #define SPLIT_HAND_PIN_LOW_IS_LEFT  // High -> right, Low -> left.
+
+/* serial.c configuration (for split keyboard). */
+#define SOFT_SERIAL_PIN GP1
+
+/* RGB settings. */
+#define RGB_DI_PIN GP0
+
+/* SPI & PMW3360 settings. */
+#define SPI_DRIVER SPID0
+#define SPI_SCK_PIN GP22
+#define SPI_MISO_PIN GP20
+#define SPI_MOSI_PIN GP23
+#define POINTING_DEVICE_CS_PIN GP16
+
+/* Reset. */
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_LED GP17
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 1000U

keyboards/bastardkb/charybdis/3x5/v2/splinky_3/info.json

@@ -0,0 +1,6 @@
+{
+    "keyboard_name": "Charybdis Nano (3x5) Splinky",
+    "usb": {
+        "device_version": "2.0.0"
+    }
+}

keyboards/bastardkb/charybdis/3x5/v2/splinky_3/readme.md

@@ -0,0 +1,5 @@
+# Splinky controller
+
+The splinky is a Pro-Micro/Elite-C replacement with USB-C and RP2040.
+
+See [plut0nium/0xB2](https://github.com/plut0nium/0xB2/#releases) to figure out the right version for you (v2 or v3).

keyboards/bastardkb/charybdis/3x5/v2/splinky_3/rules.mk

@@ -28,11 +28,10 @@ RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix functionality
 RGB_MATRIX_DRIVER = WS2812
 
 SPLIT_KEYBOARD = yes
+LAYOUTS = split_3x5_3
 
 POINTING_DEVICE_ENABLE = yes # Enable trackball
 POINTING_DEVICE_DRIVER = pmw3360
 
 SERIAL_DRIVER = vendor
 WS2812_DRIVER = vendor
-
-DEFAULT_FOLDER = bastardkb/charybdis/4x6/v2/splinky/v3

keyboards/bastardkb/charybdis/3x6/v2/splinky/readme.md

@@ -1,6 +0,0 @@
-# Splinky controller
-
-The splinky is a Pro-Micro/Elite-C replacement with USB-C and RP2040.
-
-See https://github.com/plut0nium/0xB2/#releases to figure out the right version
-for you (v2 and v3) supported.

keyboards/bastardkb/charybdis/3x6/v2/splinky/v2/rules.mk

@@ -1,2 +0,0 @@
-# Intentionally blank so that QMK detects this folder as a valid keyboard
-# parameter.

keyboards/bastardkb/charybdis/3x6/v2/splinky/v3/rules.mk

@@ -1,2 +0,0 @@
-# Intentionally blank so that QMK detects this folder as a valid keyboard
-# parameter.

keyboards/bastardkb/charybdis/3x6/v2/splinky_2/config.h

@@ -0,0 +1,50 @@
+/*
+ * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/* Key matrix configuration. */
+#define MATRIX_ROW_PINS \
+    { GP26, GP5, GP4, GP9 }
+#define MATRIX_COL_PINS \
+    { GP27, GP28, GP15, GP6, GP7, GP8 }
+
+/* Handedness. */
+#define MASTER_RIGHT
+
+// To use the handedness pin, resistors need to be installed on the adapter PCB.
+// If so, uncomment the following code, and undefine MASTER_RIGHT above.
+// #define SPLIT_HAND_PIN GP13
+// #define SPLIT_HAND_PIN_LOW_IS_LEFT  // High -> right, Low -> left.
+
+/* serial.c configuration (for split keyboard). */
+#define SOFT_SERIAL_PIN GP1
+
+/* RGB settings. */
+#define RGB_DI_PIN GP0
+
+/* SPI & PMW3360 settings. */
+#define SPI_DRIVER SPID0
+#define SPI_SCK_PIN GP18
+#define SPI_MISO_PIN GP20
+#define SPI_MOSI_PIN GP19
+#define POINTING_DEVICE_CS_PIN GP14
+
+/* Reset. */
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_LED GP17
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 1000U

keyboards/bastardkb/charybdis/3x6/v2/splinky_2/readme.md

@@ -0,0 +1,5 @@
+# Splinky controller
+
+The splinky is a Pro-Micro/Elite-C replacement with USB-C and RP2040.
+
+See [plut0nium/0xB2](https://github.com/plut0nium/0xB2/#releases) to figure out the right version for you (v2 or v3).

keyboards/bastardkb/charybdis/3x6/v2/splinky_2/rules.mk

@@ -35,5 +35,3 @@ POINTING_DEVICE_DRIVER = pmw3360
 
 SERIAL_DRIVER = vendor
 WS2812_DRIVER = vendor
-
-DEFAULT_FOLDER = bastardkb/charybdis/3x6/v2/splinky/v3

keyboards/bastardkb/charybdis/3x6/v2/splinky_3/config.h

@@ -0,0 +1,50 @@
+/*
+ * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/* Key matrix configuration. */
+#define MATRIX_ROW_PINS \
+    { GP26, GP5, GP4, GP9 }
+#define MATRIX_COL_PINS \
+    { GP27, GP28, GP21, GP6, GP7, GP8 }
+
+/* Handedness. */
+#define MASTER_RIGHT
+
+// To use the handedness pin, resistors need to be installed on the adapter PCB.
+// If so, uncomment the following code, and undefine MASTER_RIGHT above.
+// #define SPLIT_HAND_PIN GP15
+// #define SPLIT_HAND_PIN_LOW_IS_LEFT  // High -> right, Low -> left.
+
+/* serial.c configuration (for split keyboard). */
+#define SOFT_SERIAL_PIN GP1
+
+/* RGB settings. */
+#define RGB_DI_PIN GP0
+
+/* SPI & PMW3360 settings. */
+#define SPI_DRIVER SPID0
+#define SPI_SCK_PIN GP22
+#define SPI_MISO_PIN GP20
+#define SPI_MOSI_PIN GP23
+#define POINTING_DEVICE_CS_PIN GP16
+
+/* Reset. */
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_LED GP17
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 1000U

keyboards/bastardkb/charybdis/3x6/v2/splinky_3/info.json

@@ -0,0 +1,6 @@
+{
+    "keyboard_name": "Charybdis Mini (3x6) Splinky",
+    "usb": {
+        "device_version": "2.0.0"
+    }
+}

keyboards/bastardkb/charybdis/3x6/v2/splinky_3/mcuconf.h

@@ -17,17 +17,7 @@
 
 #pragma once
 
-/* Key matrix configuration. */
+#include_next "mcuconf.h"
-#define MATRIX_ROW_PINS \
-    { GP26, GP5, GP4, GP9 }
 
-/* serial.c configuration (for split keyboard). */
+#undef RP_SPI_USE_SPI0
-#define SOFT_SERIAL_PIN GP1
+#define RP_SPI_USE_SPI0 TRUE
-
-/* RGB settings. */
-#define RGB_DI_PIN GP0
-
-/* Reset. */
-#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET
-#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_LED GP17
-#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 1000U

keyboards/bastardkb/charybdis/3x6/v2/splinky_3/readme.md

@@ -0,0 +1,5 @@
+# Splinky controller
+
+The splinky is a Pro-Micro/Elite-C replacement with USB-C and RP2040.
+
+See [plut0nium/0xB2](https://github.com/plut0nium/0xB2/#releases) to figure out the right version for you (v2 or v3).

keyboards/bastardkb/charybdis/3x6/v2/splinky_3/rules.mk

@@ -0,0 +1,37 @@
+# MCU name
+MCU = RP2040
+
+# Bootloader selection
+BOOTLOADER = rp2040
+
+# RP2040-specific options
+ALLOW_WARNINGS = yes
+PICO_INTRINSICS_ENABLED = no # ATM Unsupported by ChibiOS.
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = no            # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output
+
+AUDIO_SUPPORTED = no        # Audio is not supported
+RGB_MATRIX_SUPPORTED = yes  # RGB matrix is supported and enabled by default
+RGBLIGHT_SUPPORTED = yes    # RGB underglow is supported, but not enabled by default
+RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix functionality
+RGB_MATRIX_DRIVER = WS2812
+
+SPLIT_KEYBOARD = yes
+LAYOUTS = split_3x6_3
+
+POINTING_DEVICE_ENABLE = yes # Enable trackball
+POINTING_DEVICE_DRIVER = pmw3360
+
+SERIAL_DRIVER = vendor
+WS2812_DRIVER = vendor

keyboards/bastardkb/charybdis/4x6/v2/splinky/readme.md

@@ -1,6 +0,0 @@
-# Splinky controller
-
-The splinky is a Pro-Micro/Elite-C replacement with USB-C and RP2040.
-
-See https://github.com/plut0nium/0xB2/#releases to figure out the right version
-for you (v2 and v3) supported.

keyboards/bastardkb/charybdis/4x6/v2/splinky/v2/rules.mk

@@ -1,2 +0,0 @@
-# Intentionally blank so that QMK detects this folder as a valid keyboard
-# parameter.

keyboards/bastardkb/charybdis/4x6/v2/splinky/v3/rules.mk

@@ -1,2 +0,0 @@
-# Intentionally blank so that QMK detects this folder as a valid keyboard
-# parameter.

keyboards/bastardkb/charybdis/4x6/v2/splinky_2/config.h

@@ -20,6 +20,16 @@
 /* Key matrix configuration. */
 #define MATRIX_ROW_PINS \
     { GP29, GP26, GP5, GP4, GP9 }
+#define MATRIX_COL_PINS \
+    { GP27, GP28, GP15, GP6, GP7, GP8 }
+
+/* Handedness. */
+#define MASTER_RIGHT
+
+// To use the handedness pin, resistors need to be installed on the adapter PCB.
+// If so, uncomment the following code, and undefine MASTER_RIGHT above.
+// #define SPLIT_HAND_PIN GP13
+// #define SPLIT_HAND_PIN_LOW_IS_LEFT  // High -> right, Low -> left.
 
 /* serial.c configuration (for split keyboard). */
 #define SOFT_SERIAL_PIN GP1
@@ -29,7 +39,10 @@
 
 /* SPI & PMW3360 settings. */
 #define SPI_DRIVER SPID0
+#define SPI_SCK_PIN GP18
 #define SPI_MISO_PIN GP20
+#define SPI_MOSI_PIN GP19
+#define POINTING_DEVICE_CS_PIN GP14
 
 /* Reset. */
 #define RP2040_BOOTLOADER_DOUBLE_TAP_RESET

keyboards/bastardkb/charybdis/4x6/v2/splinky_2/mcuconf.h

@@ -17,17 +17,7 @@
 
 #pragma once
 
-/* Key matrix configuration. */
+#include_next "mcuconf.h"
-#define MATRIX_ROW_PINS \
-    { GP26, GP5, GP4, GP9 }
 
-/* serial.c configuration (for split keyboard). */
+#undef RP_SPI_USE_SPI0
-#define SOFT_SERIAL_PIN GP1
+#define RP_SPI_USE_SPI0 TRUE
-
-/* RGB settings. */
-#define RGB_DI_PIN GP0
-
-/* Reset. */
-#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET
-#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_LED GP17
-#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 1000U

keyboards/bastardkb/charybdis/4x6/v2/splinky_2/readme.md

@@ -0,0 +1,5 @@
+# Splinky controller
+
+The splinky is a Pro-Micro/Elite-C replacement with USB-C and RP2040.
+
+See [plut0nium/0xB2](https://github.com/plut0nium/0xB2/#releases) to figure out the right version for you (v2 or v3).

keyboards/bastardkb/charybdis/4x6/v2/splinky_2/rules.mk

@@ -0,0 +1,36 @@
+# MCU name
+MCU = RP2040
+
+# Bootloader selection
+BOOTLOADER = rp2040
+
+# RP2040-specific options
+ALLOW_WARNINGS = yes
+PICO_INTRINSICS_ENABLED = no # ATM Unsupported by ChibiOS.
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = no            # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output
+
+AUDIO_SUPPORTED = no        # Audio is not supported
+RGB_MATRIX_SUPPORTED = yes  # RGB matrix is supported and enabled by default
+RGBLIGHT_SUPPORTED = yes    # RGB underglow is supported, but not enabled by default
+RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix functionality
+RGB_MATRIX_DRIVER = WS2812
+
+SPLIT_KEYBOARD = yes
+
+POINTING_DEVICE_ENABLE = yes # Enable trackball
+POINTING_DEVICE_DRIVER = pmw3360
+
+SERIAL_DRIVER = vendor
+WS2812_DRIVER = vendor

keyboards/bastardkb/charybdis/4x6/v2/splinky_3/config.h

@@ -0,0 +1,50 @@
+/*
+ * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+/* Key matrix configuration. */
+#define MATRIX_ROW_PINS \
+    { GP29, GP26, GP5, GP4, GP9 }
+#define MATRIX_COL_PINS \
+    { GP27, GP28, GP21, GP6, GP7, GP8 }
+
+/* Handedness. */
+#define MASTER_RIGHT
+
+// To use the handedness pin, resistors need to be installed on the adapter PCB.
+// If so, uncomment the following code, and undefine MASTER_RIGHT above.
+// #define SPLIT_HAND_PIN GP15
+// #define SPLIT_HAND_PIN_LOW_IS_LEFT  // High -> right, Low -> left.
+
+/* serial.c configuration (for split keyboard). */
+#define SOFT_SERIAL_PIN GP1
+
+/* RGB settings. */
+#define RGB_DI_PIN GP0
+
+/* SPI & PMW3360 settings. */
+#define SPI_DRIVER SPID0
+#define SPI_SCK_PIN GP22
+#define SPI_MISO_PIN GP20
+#define SPI_MOSI_PIN GP23
+#define POINTING_DEVICE_CS_PIN GP16
+
+/* Reset. */
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_LED GP17
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 1000U

keyboards/bastardkb/charybdis/4x6/v2/splinky_3/info.json

@@ -0,0 +1,6 @@
+{
+    "keyboard_name": "Charybdis (4x6) Splinky",
+    "usb": {
+        "device_version": "2.0.0"
+    }
+}

keyboards/bastardkb/charybdis/4x6/v2/splinky_3/mcuconf.h

@@ -17,17 +17,7 @@
 
 #pragma once
 
-/* Key matrix configuration. */
+#include_next "mcuconf.h"
-#define MATRIX_ROW_PINS \
-    { GP29, GP26, GP5, GP4, GP9 }
 
-/* serial.c configuration (for split keyboard). */
+#undef RP_SPI_USE_SPI0
-#define SOFT_SERIAL_PIN GP1
+#define RP_SPI_USE_SPI0 TRUE
-
-/* RGB settings. */
-#define RGB_DI_PIN GP0
-
-/* Reset. */
-#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET
-#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_LED GP17
-#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 1000U

keyboards/bastardkb/charybdis/4x6/v2/splinky_3/readme.md

@@ -0,0 +1,5 @@
+# Splinky controller
+
+The splinky is a Pro-Micro/Elite-C replacement with USB-C and RP2040.
+
+See [plut0nium/0xB2](https://github.com/plut0nium/0xB2/#releases) to figure out the right version for you (v2 or v3).

keyboards/bastardkb/charybdis/4x6/v2/splinky_3/rules.mk

@@ -0,0 +1,36 @@
+# MCU name
+MCU = RP2040
+
+# Bootloader selection
+BOOTLOADER = rp2040
+
+# RP2040-specific options
+ALLOW_WARNINGS = yes
+PICO_INTRINSICS_ENABLED = no # ATM Unsupported by ChibiOS.
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = no            # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output
+
+AUDIO_SUPPORTED = no        # Audio is not supported
+RGB_MATRIX_SUPPORTED = yes  # RGB matrix is supported and enabled by default
+RGBLIGHT_SUPPORTED = yes    # RGB underglow is supported, but not enabled by default
+RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix functionality
+RGB_MATRIX_DRIVER = WS2812
+
+SPLIT_KEYBOARD = yes
+
+POINTING_DEVICE_ENABLE = yes # Enable trackball
+POINTING_DEVICE_DRIVER = pmw3360
+
+SERIAL_DRIVER = vendor
+WS2812_DRIVER = vendor

keyboards/bastardkb/scylla/v2/splinky/readme.md

@@ -1,6 +0,0 @@
-# Splinky controller
-
-The splinky is a Pro-Micro/Elite-C replacement with USB-C and RP2040.
-
-See https://github.com/plut0nium/0xB2/#releases to figure out the right version
-for you (v2 and v3) supported.

keyboards/bastardkb/scylla/v2/splinky/v2/config.h

@@ -1,30 +0,0 @@
-/*
- * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-/* Key matrix configuration. */
-#define MATRIX_COL_PINS \
-    { GP27, GP28, GP15, GP6, GP7, GP8 }
-
-/* Handedness. */
-#define MASTER_RIGHT
-
-// To use the handedness pin, resistors need to be installed on the adapter PCB.
-// If so, uncomment the following code, and undefine MASTER_RIGHT above.
-// #define SPLIT_HAND_PIN GP13
-// #define SPLIT_HAND_PIN_LOW_IS_LEFT  // High -> right, Low -> left.

keyboards/bastardkb/scylla/v2/splinky/v2/rules.mk

@@ -1,2 +0,0 @@
-# Intentionally blank so that QMK detects this folder as a valid keyboard
-# parameter.

keyboards/bastardkb/scylla/v2/splinky/v3/config.h

@@ -1,30 +0,0 @@
-/*
- * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-/* Key matrix configuration. */
-#define MATRIX_COL_PINS \
-    { GP27, GP28, GP21, GP6, GP7, GP8 }
-
-/* Handedness. */
-#define MASTER_RIGHT
-
-// To use the handedness pin, resistors need to be installed on the adapter PCB.
-// If so, uncomment the following code, and undefine MASTER_RIGHT above.
-// #define SPLIT_HAND_PIN GP15
-// #define SPLIT_HAND_PIN_LOW_IS_LEFT  // High -> right, Low -> left.

keyboards/bastardkb/scylla/v2/splinky/v3/rules.mk

@@ -1,2 +0,0 @@
-# Intentionally blank so that QMK detects this folder as a valid keyboard
-# parameter.

keyboards/bastardkb/scylla/v2/splinky_2/config.h

@@ -18,14 +18,11 @@
 #pragma once
 
 /* Key matrix configuration. */
+#define MATRIX_ROW_PINS \
+    { GP29, GP26, GP5, GP4, GP9 }
 #define MATRIX_COL_PINS \
     { GP27, GP28, GP15, GP6, GP7, GP8 }
 
-/* SPI & PMW3360 settings. */
-#define SPI_SCK_PIN GP18
-#define SPI_MOSI_PIN GP19
-#define POINTING_DEVICE_CS_PIN GP14
-
 /* Handedness. */
 #define MASTER_RIGHT
 
@@ -33,3 +30,14 @@
 // If so, uncomment the following code, and undefine MASTER_RIGHT above.
 // #define SPLIT_HAND_PIN GP13
 // #define SPLIT_HAND_PIN_LOW_IS_LEFT  // High -> right, Low -> left.
+
+/* serial.c configuration (for split keyboard). */
+#define SOFT_SERIAL_PIN GP1
+
+/* RGB settings. */
+#define RGB_DI_PIN GP0
+
+/* Reset. */
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_LED GP17
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 1000U

keyboards/bastardkb/scylla/v2/splinky_2/readme.md

@@ -0,0 +1,5 @@
+# Splinky controller
+
+The splinky is a Pro-Micro/Elite-C replacement with USB-C and RP2040.
+
+See [plut0nium/0xB2](https://github.com/plut0nium/0xB2/#releases) to figure out the right version for you (v2 or v3).

keyboards/bastardkb/scylla/v2/splinky_2/rules.mk

@@ -31,5 +31,3 @@ SPLIT_KEYBOARD = yes
 
 SERIAL_DRIVER = vendor
 WS2812_DRIVER = vendor
-
-DEFAULT_FOLDER = bastardkb/scylla/v2/splinky/v3

keyboards/bastardkb/scylla/v2/splinky_3/config.h

@@ -18,14 +18,11 @@
 #pragma once
 
 /* Key matrix configuration. */
+#define MATRIX_ROW_PINS \
+    { GP29, GP26, GP5, GP4, GP9 }
 #define MATRIX_COL_PINS \
     { GP27, GP28, GP21, GP6, GP7, GP8 }
 
-/* SPI & PMW3360 settings. */
-#define SPI_SCK_PIN GP22
-#define SPI_MOSI_PIN GP23
-#define POINTING_DEVICE_CS_PIN GP16
-
 /* Handedness. */
 #define MASTER_RIGHT
 
@@ -33,3 +30,14 @@
 // If so, uncomment the following code, and undefine MASTER_RIGHT above.
 // #define SPLIT_HAND_PIN GP15
 // #define SPLIT_HAND_PIN_LOW_IS_LEFT  // High -> right, Low -> left.
+
+/* serial.c configuration (for split keyboard). */
+#define SOFT_SERIAL_PIN GP1
+
+/* RGB settings. */
+#define RGB_DI_PIN GP0
+
+/* Reset. */
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_LED GP17
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 1000U

keyboards/bastardkb/scylla/v2/splinky_3/info.json

@@ -0,0 +1,6 @@
+{
+    "keyboard_name": "Scylla Splinky",
+    "usb": {
+        "device_version": "2.0.0"
+    }
+}

keyboards/bastardkb/scylla/v2/splinky_3/readme.md

@@ -0,0 +1,5 @@
+# Splinky controller
+
+The splinky is a Pro-Micro/Elite-C replacement with USB-C and RP2040.
+
+See [plut0nium/0xB2](https://github.com/plut0nium/0xB2/#releases) to figure out the right version for you (v2 or v3).

keyboards/bastardkb/scylla/v2/splinky_3/rules.mk

@@ -0,0 +1,33 @@
+# MCU name
+MCU = RP2040
+
+# Bootloader selection
+BOOTLOADER = rp2040
+
+# RP2040-specific options
+ALLOW_WARNINGS = yes
+PICO_INTRINSICS_ENABLED = no # ATM Unsupported by ChibiOS.
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = no            # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output
+
+AUDIO_SUPPORTED = no        # Audio is not supported
+RGB_MATRIX_SUPPORTED = yes  # RGB matrix is supported and enabled by default
+RGBLIGHT_SUPPORTED = yes    # RGB underglow is supported, but not enabled by default
+RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix functionality
+RGB_MATRIX_DRIVER = WS2812
+
+SPLIT_KEYBOARD = yes
+
+SERIAL_DRIVER = vendor
+WS2812_DRIVER = vendor

keyboards/bastardkb/skeletyl/v2/splinky/readme.md

@@ -1,6 +0,0 @@
-# Splinky controller
-
-The splinky is a Pro-Micro/Elite-C replacement with USB-C and RP2040.
-
-See https://github.com/plut0nium/0xB2/#releases to figure out the right version
-for you (v2 and v3) supported.

keyboards/bastardkb/skeletyl/v2/splinky/v2/config.h

@@ -1,30 +0,0 @@
-/*
- * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-/* Key matrix configuration. */
-#define MATRIX_COL_PINS \
-    { GP28, GP15, GP6, GP7, GP8 }
-
-/* Handedness. */
-#define MASTER_RIGHT
-
-// To use the handedness pin, resistors need to be installed on the adapter PCB.
-// If so, uncomment the following code, and undefine MASTER_RIGHT above.
-// #define SPLIT_HAND_PIN GP13
-// #define SPLIT_HAND_PIN_LOW_IS_LEFT  // High -> right, Low -> left.

keyboards/bastardkb/skeletyl/v2/splinky/v2/rules.mk

@@ -1,2 +0,0 @@
-# Intentionally blank so that QMK detects this folder as a valid keyboard
-# parameter.

keyboards/bastardkb/skeletyl/v2/splinky/v3/config.h

@@ -1,30 +0,0 @@
-/*
- * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-/* Key matrix configuration. */
-#define MATRIX_COL_PINS \
-    { GP28, GP21, GP6, GP7, GP8 }
-
-/* Handedness. */
-#define MASTER_RIGHT
-
-// To use the handedness pin, resistors need to be installed on the adapter PCB.
-// If so, uncomment the following code, and undefine MASTER_RIGHT above.
-// #define SPLIT_HAND_PIN GP15
-// #define SPLIT_HAND_PIN_LOW_IS_LEFT  // High -> right, Low -> left.

keyboards/bastardkb/skeletyl/v2/splinky/v3/rules.mk

@@ -1,2 +0,0 @@
-# Intentionally blank so that QMK detects this folder as a valid keyboard
-# parameter.

keyboards/bastardkb/skeletyl/v2/splinky_2/config.h

@@ -18,14 +18,11 @@
 #pragma once
 
 /* Key matrix configuration. */
+#define MATRIX_ROW_PINS \
+    { GP26, GP5, GP4, GP9 }
 #define MATRIX_COL_PINS \
     { GP28, GP15, GP6, GP7, GP8 }
 
-/* SPI & PMW3360 settings. */
-#define SPI_SCK_PIN GP18
-#define SPI_MOSI_PIN GP19
-#define POINTING_DEVICE_CS_PIN GP14
-
 /* Handedness. */
 #define MASTER_RIGHT
 
@@ -33,3 +30,14 @@
 // If so, uncomment the following code, and undefine MASTER_RIGHT above.
 // #define SPLIT_HAND_PIN GP13
 // #define SPLIT_HAND_PIN_LOW_IS_LEFT  // High -> right, Low -> left.
+
+/* serial.c configuration (for split keyboard). */
+#define SOFT_SERIAL_PIN GP1
+
+/* RGB settings. */
+#define RGB_DI_PIN GP0
+
+/* Reset. */
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_LED GP17
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 1000U

keyboards/bastardkb/skeletyl/v2/splinky_2/readme.md

@@ -0,0 +1,5 @@
+# Splinky controller
+
+The splinky is a Pro-Micro/Elite-C replacement with USB-C and RP2040.
+
+See [plut0nium/0xB2](https://github.com/plut0nium/0xB2/#releases) to figure out the right version for you (v2 or v3).

keyboards/bastardkb/skeletyl/v2/splinky_2/rules.mk

@@ -32,5 +32,3 @@ LAYOUTS = split_3x5_3
 
 SERIAL_DRIVER = vendor
 WS2812_DRIVER = vendor
-
-DEFAULT_FOLDER = bastardkb/skeletyl/v2/splinky/v3

keyboards/bastardkb/skeletyl/v2/splinky_3/config.h

@@ -18,14 +18,11 @@
 #pragma once
 
 /* Key matrix configuration. */
+#define MATRIX_ROW_PINS \
+    { GP26, GP5, GP4, GP9 }
 #define MATRIX_COL_PINS \
     { GP28, GP21, GP6, GP7, GP8 }
 
-/* SPI & PMW3360 settings. */
-#define SPI_SCK_PIN GP22
-#define SPI_MOSI_PIN GP23
-#define POINTING_DEVICE_CS_PIN GP16
-
 /* Handedness. */
 #define MASTER_RIGHT
 
@@ -33,3 +30,14 @@
 // If so, uncomment the following code, and undefine MASTER_RIGHT above.
 // #define SPLIT_HAND_PIN GP15
 // #define SPLIT_HAND_PIN_LOW_IS_LEFT  // High -> right, Low -> left.
+
+/* serial.c configuration (for split keyboard). */
+#define SOFT_SERIAL_PIN GP1
+
+/* RGB settings. */
+#define RGB_DI_PIN GP0
+
+/* Reset. */
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_LED GP17
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 1000U

keyboards/bastardkb/skeletyl/v2/splinky_3/info.json

@@ -0,0 +1,6 @@
+{
+    "keyboard_name": "Skeletyl Splinky",
+    "usb": {
+        "device_version": "2.0.0"
+    }
+}

keyboards/bastardkb/skeletyl/v2/splinky_3/readme.md

@@ -0,0 +1,5 @@
+# Splinky controller
+
+The splinky is a Pro-Micro/Elite-C replacement with USB-C and RP2040.
+
+See [plut0nium/0xB2](https://github.com/plut0nium/0xB2/#releases) to figure out the right version for you (v2 or v3).

keyboards/bastardkb/skeletyl/v2/splinky_3/rules.mk

@@ -0,0 +1,34 @@
+# MCU name
+MCU = RP2040
+
+# Bootloader selection
+BOOTLOADER = rp2040
+
+# RP2040-specific options
+ALLOW_WARNINGS = yes
+PICO_INTRINSICS_ENABLED = no # ATM Unsupported by ChibiOS.
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = no            # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output
+
+AUDIO_SUPPORTED = no        # Audio is not supported
+RGB_MATRIX_SUPPORTED = yes  # RGB matrix is supported and enabled by default
+RGBLIGHT_SUPPORTED = yes    # RGB underglow is supported, but not enabled by default
+RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix functionality
+RGB_MATRIX_DRIVER = WS2812
+
+SPLIT_KEYBOARD = yes
+LAYOUTS = split_3x5_3
+
+SERIAL_DRIVER = vendor
+WS2812_DRIVER = vendor

keyboards/bastardkb/tbkmini/v2/splinky/readme.md

@@ -1,6 +0,0 @@
-# Splinky controller
-
-The splinky is a Pro-Micro/Elite-C replacement with USB-C and RP2040.
-
-See https://github.com/plut0nium/0xB2/#releases to figure out the right version
-for you (v2 and v3) supported.

keyboards/bastardkb/tbkmini/v2/splinky/v2/config.h

@@ -1,30 +0,0 @@
-/*
- * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-/* Key matrix configuration. */
-#define MATRIX_COL_PINS \
-    { GP27, GP28, GP15, GP6, GP7, GP8 }
-
-/* Handedness. */
-#define MASTER_RIGHT
-
-// To use the handedness pin, resistors need to be installed on the adapter PCB.
-// If so, uncomment the following code, and undefine MASTER_RIGHT above.
-// #define SPLIT_HAND_PIN GP13
-// #define SPLIT_HAND_PIN_LOW_IS_LEFT  // High -> right, Low -> left.

keyboards/bastardkb/tbkmini/v2/splinky/v2/rules.mk

@@ -1,2 +0,0 @@
-# Intentionally blank so that QMK detects this folder as a valid keyboard
-# parameter.

keyboards/bastardkb/tbkmini/v2/splinky/v3/config.h

@@ -1,30 +0,0 @@
-/*
- * Copyright 2022 Charly Delay <charly@codesink.dev> (@0xcharly)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#pragma once
-
-/* Key matrix configuration. */
-#define MATRIX_COL_PINS \
-    { GP27, GP28, GP21, GP6, GP7, GP8 }
-
-/* Handedness. */
-#define MASTER_RIGHT
-
-// To use the handedness pin, resistors need to be installed on the adapter PCB.
-// If so, uncomment the following code, and undefine MASTER_RIGHT above.
-// #define SPLIT_HAND_PIN GP15
-// #define SPLIT_HAND_PIN_LOW_IS_LEFT  // High -> right, Low -> left.

keyboards/bastardkb/tbkmini/v2/splinky/v3/rules.mk

@@ -1,2 +0,0 @@
-# Intentionally blank so that QMK detects this folder as a valid keyboard
-# parameter.

keyboards/bastardkb/tbkmini/v2/splinky_2/config.h

@@ -18,14 +18,11 @@
 #pragma once
 
 /* Key matrix configuration. */
+#define MATRIX_ROW_PINS \
+    { GP26, GP5, GP4, GP9 }
 #define MATRIX_COL_PINS \
     { GP27, GP28, GP15, GP6, GP7, GP8 }
 
-/* SPI & PMW3360 settings. */
-#define SPI_SCK_PIN GP18
-#define SPI_MOSI_PIN GP19
-#define POINTING_DEVICE_CS_PIN GP14
-
 /* Handedness. */
 #define MASTER_RIGHT
 
@@ -33,3 +30,14 @@
 // If so, uncomment the following code, and undefine MASTER_RIGHT above.
 // #define SPLIT_HAND_PIN GP13
 // #define SPLIT_HAND_PIN_LOW_IS_LEFT  // High -> right, Low -> left.
+
+/* serial.c configuration (for split keyboard). */
+#define SOFT_SERIAL_PIN GP1
+
+/* RGB settings. */
+#define RGB_DI_PIN GP0
+
+/* Reset. */
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_LED GP17
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 1000U

keyboards/bastardkb/tbkmini/v2/splinky_2/readme.md

@@ -0,0 +1,5 @@
+# Splinky controller
+
+The splinky is a Pro-Micro/Elite-C replacement with USB-C and RP2040.
+
+See [plut0nium/0xB2](https://github.com/plut0nium/0xB2/#releases) to figure out the right version for you (v2 or v3).

keyboards/bastardkb/tbkmini/v2/splinky_2/rules.mk

@@ -32,5 +32,3 @@ LAYOUTS = split_3x6_3
 
 SERIAL_DRIVER = vendor
 WS2812_DRIVER = vendor
-
-DEFAULT_FOLDER = bastardkb/tbkmini/v2/splinky/v3

keyboards/bastardkb/tbkmini/v2/splinky_3/config.h

@@ -18,14 +18,11 @@
 #pragma once
 
 /* Key matrix configuration. */
+#define MATRIX_ROW_PINS \
+    { GP26, GP5, GP4, GP9 }
 #define MATRIX_COL_PINS \
     { GP27, GP28, GP21, GP6, GP7, GP8 }
 
-/* SPI & PMW3360 settings. */
-#define SPI_SCK_PIN GP22
-#define SPI_MOSI_PIN GP23
-#define POINTING_DEVICE_CS_PIN GP16
-
 /* Handedness. */
 #define MASTER_RIGHT
 
@@ -33,3 +30,14 @@
 // If so, uncomment the following code, and undefine MASTER_RIGHT above.
 // #define SPLIT_HAND_PIN GP15
 // #define SPLIT_HAND_PIN_LOW_IS_LEFT  // High -> right, Low -> left.
+
+/* serial.c configuration (for split keyboard). */
+#define SOFT_SERIAL_PIN GP1
+
+/* RGB settings. */
+#define RGB_DI_PIN GP0
+
+/* Reset. */
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_LED GP17
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 1000U

keyboards/bastardkb/tbkmini/v2/splinky_3/info.json

@@ -0,0 +1,6 @@
+{
+    "keyboard_name": "TBK Mini Splinky",
+    "usb": {
+        "device_version": "2.0.0"
+    }
+}

keyboards/bastardkb/tbkmini/v2/splinky_3/readme.md

@@ -0,0 +1,5 @@
+# Splinky controller
+
+The splinky is a Pro-Micro/Elite-C replacement with USB-C and RP2040.
+
+See [plut0nium/0xB2](https://github.com/plut0nium/0xB2/#releases) to figure out the right version for you (v2 or v3).

keyboards/bastardkb/tbkmini/v2/splinky_3/rules.mk

@@ -0,0 +1,34 @@
+# MCU name
+MCU = RP2040
+
+# Bootloader selection
+BOOTLOADER = rp2040
+
+# RP2040-specific options
+ALLOW_WARNINGS = yes
+PICO_INTRINSICS_ENABLED = no # ATM Unsupported by ChibiOS.
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = yes      # Enable Bootmagic Lite
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+NKRO_ENABLE = no            # Enable N-Key Rollover
+BACKLIGHT_ENABLE = no       # Enable keyboard backlight functionality
+RGBLIGHT_ENABLE = no        # Enable keyboard RGB underglow
+AUDIO_ENABLE = no           # Audio output
+
+AUDIO_SUPPORTED = no        # Audio is not supported
+RGB_MATRIX_SUPPORTED = yes  # RGB matrix is supported and enabled by default
+RGBLIGHT_SUPPORTED = yes    # RGB underglow is supported, but not enabled by default
+RGB_MATRIX_ENABLE = yes     # Enable keyboard RGB matrix functionality
+RGB_MATRIX_DRIVER = WS2812
+
+SPLIT_KEYBOARD = yes
+LAYOUTS = split_3x6_3
+
+SERIAL_DRIVER = vendor
+WS2812_DRIVER = vendor