Change `RGB_MATRIX_STARTUP_*` defines to `RGB_MATRIX_DEFAULT_*` (#19079)

docs/feature_rgb_matrix.md

@@ -798,11 +798,11 @@ These are defined in [`color.h`](https://github.com/qmk/qmk_firmware/blob/master
 #define RGB_MATRIX_LED_PROCESS_LIMIT (RGB_MATRIX_LED_COUNT + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
 #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
-#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT // Sets the default mode, if none has been set
+#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT // Sets the default mode, if none has been set
-#define RGB_MATRIX_STARTUP_HUE 0 // Sets the default hue value, if none has been set
+#define RGB_MATRIX_DEFAULT_HUE 0 // Sets the default hue value, if none has been set
-#define RGB_MATRIX_STARTUP_SAT 255 // Sets the default saturation value, if none has been set
+#define RGB_MATRIX_DEFAULT_SAT 255 // Sets the default saturation value, if none has been set
-#define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS // Sets the default brightness value, if none has been set
+#define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS // Sets the default brightness value, if none has been set
-#define RGB_MATRIX_STARTUP_SPD 127 // Sets the default animation speed, if none has been set
+#define RGB_MATRIX_DEFAULT_SPD 127 // Sets the default animation speed, if none has been set
 #define RGB_MATRIX_DISABLE_KEYCODES // disables control of rgb matrix by keycodes (must use code functions to control the feature)
 #define RGB_MATRIX_SPLIT { X, Y } 	// (Optional) For split keyboards, the number of LEDs connected on each half. X = left, Y = Right.
                               		// If RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is enabled, you also will want to enable SPLIT_TRANSPORT_MIRROR

keyboards/3keyecosystem/2key2/config.h

@@ -36,10 +36,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGB_DI_PIN B2
 #define RGB_MATRIX_LED_COUNT 2
 #define RGB_MATRIX_KEYPRESSES
-#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_REACTIVE
+#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_SOLID_REACTIVE
-#define RGB_MATRIX_STARTUP_HUE 90
+#define RGB_MATRIX_DEFAULT_HUE 90
-#define RGB_MATRIX_STARTUP_SPD 20
+#define RGB_MATRIX_DEFAULT_SPD 20
-#define RGB_MATRIX_STARTUP_VAL 128
+#define RGB_MATRIX_DEFAULT_VAL 128
 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 #define RGB_DISABLE_WHEN_USB_SUSPENDED
 

keyboards/4pplet/perk60_iso/rev_a/config.h

@@ -36,7 +36,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGB_MATRIX_LED_COUNT 62
 #define ISSI_PWM_FREQUENCY 0b010
 
-#define RGB_MATRIX_STARTUP_VAL 80
+#define RGB_MATRIX_DEFAULT_VAL 80
 #define RGB_MATRIX_KEYPRESSES
 
 // RGB Matrix Animation modes. Explicitly enabled

keyboards/acheron/apollo/87h/delta/config.h

@@ -50,11 +50,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define WS2812_DMA_STREAM STM32_DMA2_STREAM5
 #define WS2812_DMA_CHANNEL 6
 
-#define RGB_MATRIX_STARTUP_VAL 60
+#define RGB_MATRIX_DEFAULT_VAL 60
 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 #define RGB_MATRIX_KEYPRESSES
 #define RGB_DISABLE_WHEN_USB_SUSPENDED  // turn off effects when suspended
-#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT
+#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT
 
 #define ENABLE_RGB_MATRIX_ALPHAS_MODS
 #define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN

keyboards/acheron/apollo/87h/gamma/config.h

@@ -48,11 +48,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGB_MATRIX_LED_COUNT DRIVER_1_LED_TOTAL
 #define ISSI_DRIVER_TOTAL RGB_MATRIX_LED_COUNT
 
-#define RGB_MATRIX_STARTUP_VAL 80
+#define RGB_MATRIX_DEFAULT_VAL 80
 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 #define RGB_MATRIX_KEYPRESSES
 #define RGB_DISABLE_WHEN_USB_SUSPENDED  // turn off effects when suspended
-#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_HUE_WAVE
+#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_HUE_WAVE
 
 #define ENABLE_RGB_MATRIX_ALPHAS_MODS
 #define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN

keyboards/acheron/apollo/87htsc/config.h

@@ -50,11 +50,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define WS2812_DMA_STREAM STM32_DMA2_STREAM5
 #define WS2812_DMA_CHANNEL 6
 
-#define RGB_MATRIX_STARTUP_VAL 60
+#define RGB_MATRIX_DEFAULT_VAL 60
 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 #define RGB_MATRIX_KEYPRESSES
 #define RGB_DISABLE_WHEN_USB_SUSPENDED  // turn off effects when suspended
-#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT
+#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT
 
 #define ENABLE_RGB_MATRIX_ALPHAS_MODS
 #define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN

keyboards/acheron/apollo/88htsc/config.h

@@ -50,11 +50,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define WS2812_DMA_STREAM STM32_DMA2_STREAM5
 #define WS2812_DMA_CHANNEL 6
 
-#define RGB_MATRIX_STARTUP_VAL 60
+#define RGB_MATRIX_DEFAULT_VAL 60
 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 #define RGB_MATRIX_KEYPRESSES
 #define RGB_DISABLE_WHEN_USB_SUSPENDED  // turn off effects when suspended
-#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT
+#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT
 
 #define ENABLE_RGB_MATRIX_ALPHAS_MODS
 #define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN

keyboards/adm42/rev4/config.h

@@ -26,7 +26,7 @@
 #define RGB_DISABLE_WHEN_USB_SUSPENDED
 #define RGB_MATRIX_LED_PROCESS_LIMIT 21
 #define RGB_MATRIX_LED_FLUSH_LIMIT 16
-#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT
+#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT
 #define RGB_MATRIX_TYPING_HEATMAP_DECREASE_DELAY_MS 20
 #define RGB_MATRIX_KEYPRESSES
 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS

keyboards/aeboards/satellite/rev1/config.h

@@ -26,11 +26,11 @@
 #define ISSI_DRIVER_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
 #define RGB_MATRIX_LED_COUNT ISSI_DRIVER_TOTAL
 
-#define RGB_MATRIX_STARTUP_VAL 80
+#define RGB_MATRIX_DEFAULT_VAL 80
 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 #define RGB_MATRIX_KEYPRESSES
 #define RGB_DISABLE_WHEN_USB_SUSPENDED  // turn off effects when suspended
-#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL
+#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
 
 // RGB Matrix Animation modes. Explicitly enabled
 // For full list of effects, see:

keyboards/atlantis/ak81_ve/config.h

@@ -58,10 +58,10 @@
 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 #define RGB_DISABLE_WHEN_USB_SUSPENDED true
 #define RGB_MATRIX_LED_COUNT 96
-#define RGB_MATRIX_STARTUP_HUE 170
+#define RGB_MATRIX_DEFAULT_HUE 170
-#define RGB_MATRIX_STARTUP_SAT 255
+#define RGB_MATRIX_DEFAULT_SAT 255
 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 130
-#define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
+#define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
 
 #define ENABLE_RGB_MATRIX_ALPHAS_MODS               // Static dual hue, speed is hue for secondary hue
 #define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN          // Static gradient top to bottom, speed controls how much gradient changes

keyboards/bandominedoni/config.h

@@ -88,7 +88,7 @@
 #   define LED_HITS_TO_REMEMBER 10
 
 #   define RGB_MATRIX_MAXIMUM_BRIGHTNESS 50
-#   define RGB_MATRIX_STARTUP_SPD 127
+#   define RGB_MATRIX_DEFAULT_SPD 127
 // the above brighness setting has no effect on rgb_matrix_set_color().
 // Use darker colors instead.
 /*              RGB darker COLORS             */

keyboards/bandominedoni/keymaps/led/keymap.c

@@ -178,7 +178,7 @@ void eeconfig_init_user(void) {  // EEPROM is getting reset!
     my_init();
 #ifdef RGB_MATRIX_ENABLE
     rgb_matrix_enable();
-    rgb_matrix_set_speed(RGB_MATRIX_STARTUP_SPD);
+    rgb_matrix_set_speed(RGB_MATRIX_DEFAULT_SPD);
     rgb_matrix_sethsv(HSV_BLUE);
 
     rgb_matrix_mode(RGB_MATRIX_SOLID_REACTIVE);

keyboards/bandominedoni/keymaps/lednotg/keymap.c

@@ -178,7 +178,7 @@ void eeconfig_init_user(void) {  // EEPROM is getting reset!
     my_init();
 #ifdef RGB_MATRIX_ENABLE
     rgb_matrix_enable();
-    rgb_matrix_set_speed(RGB_MATRIX_STARTUP_SPD);
+    rgb_matrix_set_speed(RGB_MATRIX_DEFAULT_SPD);
     rgb_matrix_sethsv(HSV_BLUE);
 
     rgb_matrix_mode(RGB_MATRIX_SOLID_REACTIVE);

keyboards/bandominedoni/keymaps/via/keymap.c

@@ -117,7 +117,7 @@ void eeconfig_init_user(void) {  // EEPROM is getting reset!
     my_init();
 #ifdef RGB_MATRIX_ENABLE
     rgb_matrix_enable();
-    rgb_matrix_set_speed(RGB_MATRIX_STARTUP_SPD);
+    rgb_matrix_set_speed(RGB_MATRIX_DEFAULT_SPD);
     rgb_matrix_sethsv(HSV_BLUE);
 
     rgb_matrix_mode(RGB_MATRIX_SOLID_REACTIVE);

keyboards/bastardkb/charybdis/3x5/keymaps/bstiq/config.h

@@ -153,14 +153,13 @@
 
 // Rainbow swirl as startup mode.
 #    define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
-#    define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT
+#    define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT
 
 // Slow swirl at startup.
-#    define RGB_MATRIX_STARTUP_SPD 32
+#    define RGB_MATRIX_DEFAULT_SPD 32
 
 // Startup values.
-#    define RGB_MATRIX_STARTUP_HUE 0
+#    define RGB_MATRIX_DEFAULT_HUE 0
-#    define RGB_MATRIX_STARTUP_SAT 255
+#    define RGB_MATRIX_DEFAULT_SAT 255
-#    define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
+#    define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
-#    define RGB_MATRIX_STARTUP_HSV RGB_MATRIX_STARTUP_HUE, RGB_MATRIX_STARTUP_SAT, RGB_MATRIX_STARTUP_VAL
 #endif // RGB_MATRIX_ENABLE

keyboards/bastardkb/charybdis/3x5/keymaps/via/keymap.c

@@ -236,7 +236,7 @@ void matrix_scan_user(void) {
         auto_pointer_layer_timer = 0;
         layer_off(LAYER_POINTER);
 #        ifdef RGB_MATRIX_ENABLE
-        rgb_matrix_mode_noeeprom(RGB_MATRIX_STARTUP_MODE);
+        rgb_matrix_mode_noeeprom(RGB_MATRIX_DEFAULT_MODE);
 #        endif // RGB_MATRIX_ENABLE
     }
 }

keyboards/bastardkb/charybdis/3x6/keymaps/via/keymap.c

@@ -116,7 +116,7 @@ void matrix_scan_user(void) {
         auto_pointer_layer_timer = 0;
         layer_off(LAYER_POINTER);
 #        ifdef RGB_MATRIX_ENABLE
-        rgb_matrix_mode_noeeprom(RGB_MATRIX_STARTUP_MODE);
+        rgb_matrix_mode_noeeprom(RGB_MATRIX_DEFAULT_MODE);
 #        endif // RGB_MATRIX_ENABLE
     }
 }

keyboards/bastardkb/charybdis/4x6/keymaps/via/keymap.c

@@ -139,7 +139,7 @@ void matrix_scan_user(void) {
         auto_pointer_layer_timer = 0;
         layer_off(LAYER_POINTER);
 #        ifdef RGB_MATRIX_ENABLE
-        rgb_matrix_mode_noeeprom(RGB_MATRIX_STARTUP_MODE);
+        rgb_matrix_mode_noeeprom(RGB_MATRIX_DEFAULT_MODE);
 #        endif // RGB_MATRIX_ENABLE
     }
 }

keyboards/bastardkb/charybdis/config.h

@@ -40,17 +40,16 @@
 #    define RGB_MATRIX_KEYPRESSES
 
 // Startup values.
-#    define RGB_MATRIX_STARTUP_HUE 0
+#    define RGB_MATRIX_DEFAULT_HUE 0
-#    define RGB_MATRIX_STARTUP_SAT 255
+#    define RGB_MATRIX_DEFAULT_SAT 255
-#    define RGB_MATRIX_STARTUP_VAL 64
+#    define RGB_MATRIX_DEFAULT_VAL 64
-#    define RGB_MATRIX_STARTUP_HSV RGB_MATRIX_STARTUP_HUE, RGB_MATRIX_STARTUP_SAT, RGB_MATRIX_STARTUP_VAL
 
 // Rainbow swirl as startup mode.
 #    define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
-#    define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT
+#    define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT
 
 // Slow swirl at startup.
-#    define RGB_MATRIX_STARTUP_SPD 32
+#    define RGB_MATRIX_DEFAULT_SPD 32
 
 #    ifndef __arm__
 // Disable control of RGB matrix by keycodes (must use firmware implementation

keyboards/bastardkb/dilemma/3x5_2/keymaps/bstiq/config.h

@@ -140,14 +140,13 @@
 
 // Rainbow swirl as startup mode.
 #    define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
-#    define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT
+#    define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT
 
 // Slow swirl at startup.
-#    define RGB_MATRIX_STARTUP_SPD 32
+#    define RGB_MATRIX_DEFAULT_SPD 32
 
 // Startup values.
-#    define RGB_MATRIX_STARTUP_HUE 0
+#    define RGB_MATRIX_DEFAULT_HUE 0
-#    define RGB_MATRIX_STARTUP_SAT 255
+#    define RGB_MATRIX_DEFAULT_SAT 255
-#    define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
+#    define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
-#    define RGB_MATRIX_STARTUP_HSV RGB_MATRIX_STARTUP_HUE, RGB_MATRIX_STARTUP_SAT, RGB_MATRIX_STARTUP_VAL
 #endif // RGB_MATRIX_ENABLE

keyboards/bastardkb/dilemma/3x5_3/config.h

@@ -65,7 +65,7 @@
 #    define RGB_MATRIX_LED_COUNT RGBLED_NUM
 #    define RGB_MATRIX_SPLIT RGBLED_SPLIT
 #    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 50
-#    define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
+#    define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
 #    define RGB_DISABLE_WHEN_USB_SUSPENDED
 #    define RGB_MATRIX_KEYPRESSES
 #endif

keyboards/bastardkb/dilemma/3x5_3/keymaps/bstiq/config.h

@@ -132,14 +132,13 @@
 
 // Rainbow swirl as startup mode.
 #    define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
-#    define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT
+#    define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT
 
 // Slow swirl at startup.
-#    define RGB_MATRIX_STARTUP_SPD 32
+#    define RGB_MATRIX_DEFAULT_SPD 32
 
 // Startup values.
-#    define RGB_MATRIX_STARTUP_HUE 0
+#    define RGB_MATRIX_DEFAULT_HUE 0
-#    define RGB_MATRIX_STARTUP_SAT 255
+#    define RGB_MATRIX_DEFAULT_SAT 255
-#    define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
+#    define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
-#    define RGB_MATRIX_STARTUP_HSV RGB_MATRIX_STARTUP_HUE, RGB_MATRIX_STARTUP_SAT, RGB_MATRIX_STARTUP_VAL
 #endif // RGB_MATRIX_ENABLE

keyboards/bastardkb/scylla/config.h

@@ -40,7 +40,7 @@
 #    define RGB_MATRIX_LED_COUNT RGBLED_NUM
 #    define RGB_MATRIX_SPLIT RGBLED_SPLIT
 #    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 50
-#    define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
+#    define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
 #    define RGB_DISABLE_WHEN_USB_SUSPENDED
 #    define RGB_MATRIX_KEYPRESSES
 #endif

keyboards/bastardkb/skeletyl/config.h

@@ -40,7 +40,7 @@
 #    define RGB_MATRIX_LED_COUNT RGBLED_NUM
 #    define RGB_MATRIX_SPLIT RGBLED_SPLIT
 #    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 50
-#    define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
+#    define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
 #    define RGB_DISABLE_WHEN_USB_SUSPENDED
 #    define RGB_MATRIX_KEYPRESSES
 #endif

keyboards/bastardkb/tbkmini/config.h

@@ -40,7 +40,7 @@
 #    define RGB_MATRIX_LED_COUNT RGBLED_NUM
 #    define RGB_MATRIX_SPLIT RGBLED_SPLIT
 #    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 50
-#    define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
+#    define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
 #    define RGB_DISABLE_WHEN_USB_SUSPENDED
 #    define RGB_MATRIX_KEYPRESSES
 #endif

keyboards/binepad/bn006/config.h

@@ -25,7 +25,7 @@
     #define RGB_MATRIX_KEYPRESSES // reacts to keypresses
     #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
     #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
-    #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_BREATHING // Sets the default mode, if none has been set
+    #define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_BREATHING // Sets the default mode, if none has been set
     #define RGB_TRIGGER_ON_KEYDOWN      // Triggers RGB keypress events on key down. This makes RGB control feel more responsive. This may cause RGB to not function properly on some boards
 
     // RGB Matrix Animation modes. Explicitly enabled

keyboards/boardsource/lulu/keymaps/rmeli/config.h

@@ -25,10 +25,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    define RGB_MATRIX_KEYPRESSES // enable keypress effects
 #    define RGB_MATRIX_LED_FLUSH_LIMIT 16
 #    define RGB_DISABLE_WHEN_USB_SUSPENDED
-#    define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_COLOR
+#    define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_SOLID_COLOR
-#    define RGB_MATRIX_STARTUP_HUE 10
+#    define RGB_MATRIX_DEFAULT_HUE 10
-#    define RGB_MATRIX_STARTUP_SAT 255
+#    define RGB_MATRIX_DEFAULT_SAT 255
-#    define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
+#    define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
 // Disable RGB Matrix effects (from lulu/config.h)
 #    undef ENABLE_RGB_MATRIX_ALPHAS_MODS
 #    undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN

keyboards/chromatonemini/config.h

@@ -64,7 +64,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #   define LED_HITS_TO_REMEMBER 10
 
 #   define RGB_MATRIX_MAXIMUM_BRIGHTNESS 50
-#   define RGB_MATRIX_STARTUP_SPD 127
+#   define RGB_MATRIX_DEFAULT_SPD 127
 #   define RGB_MATRIX_CENTER { 124, 32 }
 // the above brighness setting has no effect on rgb_matrix_set_color().
 // Use darker colors instead.

keyboards/chromatonemini/keymaps/led/keymap.c

@@ -310,7 +310,7 @@ void eeconfig_init_user(void) {  // EEPROM is getting reset!
 
 #ifdef RGB_MATRIX_ENABLE
     rgb_matrix_enable();
-    rgb_matrix_set_speed(RGB_MATRIX_STARTUP_SPD);
+    rgb_matrix_set_speed(RGB_MATRIX_DEFAULT_SPD);
 #endif  // RGB_MATRIX_ENABLE
     my_init(); // commom codes called from eeconfig_init_user() and keyboard_post_init_user().
 }

keyboards/chromatonemini/keymaps/party/keymap.c

@@ -313,7 +313,7 @@ void eeconfig_init_user(void) {  // EEPROM is getting reset!
 
 #ifdef RGB_MATRIX_ENABLE
     rgb_matrix_enable();
-    rgb_matrix_set_speed(RGB_MATRIX_STARTUP_SPD);
+    rgb_matrix_set_speed(RGB_MATRIX_DEFAULT_SPD);
 #endif  // RGB_MATRIX_ENABLE
     my_init(); // commom codes called from eeconfig_init_user() and keyboard_post_init_user().
 }

keyboards/chromatonemini/keymaps/via/keymap.c

@@ -119,7 +119,7 @@ void eeconfig_init_user(void) {  // EEPROM is getting reset!
 
 #ifdef RGB_MATRIX_ENABLE
     rgb_matrix_enable();
-    rgb_matrix_set_speed(RGB_MATRIX_STARTUP_SPD);
+    rgb_matrix_set_speed(RGB_MATRIX_DEFAULT_SPD);
     rgb_matrix_sethsv(HSV_BLUE);
 #endif  // RGB_MATRIX_ENABLE
     my_init(); // commom codes called from eeconfig_init_user() and keyboard_post_init_user().

keyboards/crkbd/keymaps/davidrambo/config.h

@@ -34,7 +34,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define PERMISSIVE_HOLD
 
 #ifdef RGB_MATRIX_ENABLE
-    #define RGB_MATRIX_STARTUP_HUE 231
+    #define RGB_MATRIX_DEFAULT_HUE 231
     #define RGB_MATRIX_KEYPRESSES // reacts to keypresses
     #define RGB_MATRIX_TYPING_MEATMAP_DECREASE_DELAY_MS 50
     // #   define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)

keyboards/crkbd/keymaps/devdev/config.h

@@ -75,7 +75,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #   define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
 #    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
 
-#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_GRADIENT_LEFT_RIGHT
+#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_GRADIENT_LEFT_RIGHT
 
 #    define RGB_MATRIX_HUE_STEP 8
 #    define RGB_MATRIX_SAT_STEP 8

keyboards/crkbd/keymaps/dsanchezseco/config.h

@@ -28,7 +28,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 // lower maximum brightness to lower power usage and prevent unresponsiveness
 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200
-#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_GRADIENT_LEFT_RIGHT
+#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_GRADIENT_LEFT_RIGHT
 
 // RGB Matrix Animation modes. Explicitly enabled
 // For full list of effects, see:

keyboards/crkbd/keymaps/gotham/config.h

@@ -49,7 +49,7 @@
 #    define RGB_MATRIX_SAT_STEP 64
 #    define RGB_MATRIX_VAL_STEP 64
 #    define RGB_MATRIX_SPD_STEP 20
-#    define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_COLOR
+#    define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_SOLID_COLOR
 
 /* Disable the animations you don't want/need.  You will need to disable a good number of these    *
  * because they take up a lot of space.  Disable until you can successfully compile your firmware. */

keyboards/crkbd/keymaps/jpe230/config.h

@@ -30,9 +30,9 @@
 #define RGB_DISABLE_WHEN_USB_SUSPENDED
 #define RGB_DISABLE_TIMEOUT CUSTOM_OLED_TIMEOUT
 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 128
-#define RGB_MATRIX_STARTUP_HUE 215
+#define RGB_MATRIX_DEFAULT_HUE 215
-#define RGB_MATRIX_STARTUP_SAT 255
+#define RGB_MATRIX_DEFAULT_SAT 255
-#define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
+#define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
 
 /* ---------------------------
  * Common other Configuration

keyboards/crkbd/keymaps/rmeli/config.h

@@ -54,10 +54,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #    define ENABLE_RGB_MATRIX_SOLID_COLOR
 #    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
 // Default effect
-#    define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_COLOR
+#    define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_SOLID_COLOR
-#    define RGB_MATRIX_STARTUP_HUE 10
+#    define RGB_MATRIX_DEFAULT_HUE 10
-#    define RGB_MATRIX_STARTUP_SAT 255
+#    define RGB_MATRIX_DEFAULT_SAT 255
-#    define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
+#    define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
 #endif
 
 // https://github.com/qmk/qmk_firmware/blob/develop/docs/squeezing_avr.md

keyboards/crkbd/keymaps/thunderbird2086/config.h

@@ -52,7 +52,7 @@
 #    define RGB_MATRIX_SAT_STEP 64
 #    define RGB_MATRIX_VAL_STEP 64
 #    define RGB_MATRIX_SPD_STEP 20
-#    define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_COLOR
+#    define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_SOLID_COLOR
 
 /* Disable the animations you don't want/need.  You will need to disable a good number of these    *
  * because they take up a lot of space.  Disable until you can successfully compile your firmware. */

keyboards/dekunukem/duckypad/config.h

@@ -34,8 +34,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifdef RGB_MATRIX_ENABLE
 
 #define RGB_MATRIX_KEYPRESSES
-#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_REACTIVE_SIMPLE
+#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_SOLID_REACTIVE_SIMPLE
-#define RGB_MATRIX_STARTUP_HUE 221
+#define RGB_MATRIX_DEFAULT_HUE 221
 // RGB Matrix Animation modes. Explicitly enabled
 // For full list of effects, see:
 // https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects

keyboards/doio/kb16/rev1/config.h

@@ -48,8 +48,8 @@
     #define RGB_DI_PIN F6
     #define RGB_MATRIX_LED_COUNT 16
     #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200
-    #define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
+    #define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
-    #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_UP_DOWN
+    #define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_UP_DOWN
     #define RGB_MATRIX_KEYPRESSES
 
     /* RGB Matrix effect */

keyboards/doio/kb16/rev2/config.h

@@ -55,8 +55,8 @@
     #define RGB_DI_PIN A10
     #define RGB_MATRIX_LED_COUNT 16
     #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200
-    #define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
+    #define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
-    #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_UP_DOWN
+    #define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_UP_DOWN
     #define RGB_MATRIX_KEYPRESSES
 
     /* RGB Matrix effect */

keyboards/drop/sense75/config.h

@@ -18,7 +18,7 @@
 
 #    define RGB_DISABLE_TIMEOUT 0
 #    define RGB_DISABLE_WHEN_USB_SUSPENDED
-#    define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT
+#    define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT
 #    define RGB_MATRIX_KEYPRESSES
 #    define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 #    define ENABLE_RGB_MATRIX_ALPHAS_MODS

keyboards/dtisaac/dosa40rgb/config.h

@@ -48,7 +48,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
-#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set
+#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set
 
 #define ENABLE_RGB_MATRIX_ALPHAS_MODS
 #define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN

keyboards/dztech/dz60rgb/keymaps/kgreulich/config.h

@@ -27,7 +27,7 @@
 #undef DISABLE_RGB_MATRIX_SPLASH
 #undef DISABLE_RGB_MATRIX_MULTISPLASH
 #undef DISABLE_RGB_MATRIX_SOLID_MULTISPLASH
-#undef RGB_MATRIX_STARTUP_MODE
+#undef RGB_MATRIX_DEFAULT_MODE
 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 #undef ENABLE_RGB_MATRIX_SOLID_COLOR
 #undef ENABLE_RGB_MATRIX_ALPHAS_MODS

keyboards/dztech/dz60rgb/keymaps/matthewrobo/config.h

@@ -10,7 +10,7 @@
 #undef DISABLE_RGB_MATRIX_SPLASH
 #undef DISABLE_RGB_MATRIX_MULTISPLASH
 #undef DISABLE_RGB_MATRIX_SOLID_MULTISPLASH
-#undef RGB_MATRIX_STARTUP_MODE
+#undef RGB_MATRIX_DEFAULT_MODE
 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 
 // #undef ENABLE_RGB_MATRIX_SOLID_COLOR

keyboards/dztech/dz60rgb/v1/config.h

@@ -77,7 +77,7 @@
 #    define ENABLE_RGB_MATRIX_SOLID_SPLASH
 // #    define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
 
-#    define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL
+#    define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
 #    define DRIVER_ADDR_1 0b1010000
 #    define DRIVER_COUNT 1
 #    define RGB_MATRIX_LED_COUNT 63

keyboards/dztech/dz60rgb_ansi/v1/config.h

@@ -77,7 +77,7 @@
 #    define ENABLE_RGB_MATRIX_SOLID_SPLASH
 // #    define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
 
-#    define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL
+#    define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
 #    define DRIVER_ADDR_1 0b1010000
 #    define DRIVER_COUNT 1
 #    define RGB_MATRIX_LED_COUNT 61

keyboards/dztech/dz60rgb_wkl/v1/config.h

@@ -77,7 +77,7 @@
 #    define ENABLE_RGB_MATRIX_SOLID_SPLASH
 // #    define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
 
-#    define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL
+#    define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
 #    define DRIVER_ADDR_1 0b1010000
 #    define DRIVER_COUNT 1
 #    define RGB_MATRIX_LED_COUNT 62

keyboards/dztech/dz64rgb/config.h

@@ -55,7 +55,7 @@
 #define ENABLE_RGB_MATRIX_PIXEL_FLOW
 #define ENABLE_RGB_MATRIX_PIXEL_FRACTAL
 #define ENABLE_RGB_MATRIX_TYPING_HEATMAP
-#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL
+#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
 #define DRIVER_ADDR_1 0b1010000
 #define DRIVER_COUNT 1
 #define RGB_MATRIX_LED_COUNT 64

keyboards/dztech/dz65rgb/keymaps/drootz/config.h

@@ -9,16 +9,16 @@
 #	undef DISABLE_RGB_MATRIX_SPLASH
 #	undef DISABLE_RGB_MATRIX_SOLID_SPLASH
 #	undef RGB_MATRIX_LED_FLUSH_LIMIT
-#	undef RGB_MATRIX_STARTUP_MODE
+#	undef RGB_MATRIX_DEFAULT_MODE
 #	undef RGB_MATRIX_MAXIMUM_BRIGHTNESS
 #	define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255
 #	define RGB_MATRIX_LED_FLUSH_LIMIT 16 // default: 26
-#	define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_TYPING_HEATMAP
+#	define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_TYPING_HEATMAP
 #	define RGB_MATRIX_FRAMEBUFFER_EFFECTS
-#	define RGB_MATRIX_STARTUP_HUE 10
+#	define RGB_MATRIX_DEFAULT_HUE 10
-#	define RGB_MATRIX_STARTUP_SAT 255
+#	define RGB_MATRIX_DEFAULT_SAT 255
-#	define RGB_MATRIX_STARTUP_VAL 200
+#	define RGB_MATRIX_DEFAULT_VAL 200
-#	define RGB_MATRIX_STARTUP_SPD 75
+#	define RGB_MATRIX_DEFAULT_SPD 75
 /* Active RBG Modes */
 /* #	undef ENABLE_RGB_MATRIX_TYPING_HEATMAP   		// How hot is your WPM! */
 /* #	undef ENABLE_RGB_MATRIX_SPLASH           		// Full gradient & value pulse away from a single key hit then fades value out */

keyboards/dztech/dz65rgb/keymaps/jumper149/config.h

@@ -58,6 +58,6 @@
 
 // Fix RGB_MATRIX_STARTUP, because RGB_MATRIX_CYCLE_ALL is disabled.
 // The actual handling of RGB_EFFECTs is done in keymap.c
-#undef RGB_MATRIX_STARTUP_MODE
+#undef RGB_MATRIX_DEFAULT_MODE
 
 #endif

keyboards/dztech/dz65rgb/keymaps/matthewrobo/config.h

@@ -6,7 +6,7 @@
 #define TAPPING_TERM 150
 
 #define TAP_HOLD_CAPS_DELAY 0
-#undef RGB_MATRIX_STARTUP_MODE
+#undef RGB_MATRIX_DEFAULT_MODE
 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 
 // #undef ENABLE_RGB_MATRIX_SOLID_COLOR

keyboards/dztech/dz65rgb/keymaps/yuannan/config.h

@@ -22,8 +22,8 @@
 #undef ENABLE_RGB_MATRIX_RAINDROPS
 #undef ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
 
-#undef RGB_MATRIX_STARTUP_MODE
+#undef RGB_MATRIX_DEFAULT_MODE
-#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_OUT_IN_DUAL
+#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_OUT_IN_DUAL
 
 #define RGB_MATRIX_HUE_STEP 8
 #define RGB_MATRIX_SAT_STEP 8

keyboards/dztech/dz65rgb/v1/config.h

@@ -90,7 +90,7 @@
 #    define ENABLE_RGB_MATRIX_SOLID_SPLASH
 // #    define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
 #    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200
-#    define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL
+#    define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
 #    define DRIVER_ADDR_1 0b1110100
 #    define DRIVER_ADDR_2 0b1110111
 #    define DRIVER_COUNT 2

keyboards/dztech/dz65rgb/v2/config.h

@@ -90,7 +90,7 @@
 #    define ENABLE_RGB_MATRIX_SOLID_SPLASH
 // #    define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
 #    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200
-#    define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL
+#    define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
 #    define DRIVER_ADDR_1 0b1110100
 #    define DRIVER_ADDR_2 0b1110111
 #    define DRIVER_COUNT 2

keyboards/dztech/dz65rgb/v3/config.h

@@ -85,7 +85,7 @@
 #    define ENABLE_RGB_MATRIX_SOLID_SPLASH
 #    define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
 
-#    define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL
+#    define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
 #    define DRIVER_ADDR_1 0b0110000
 #    define DRIVER_COUNT 1
 #    define RGB_MATRIX_LED_COUNT 68

keyboards/eek/config.h

@@ -59,7 +59,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  #ifdef RGB_MATRIX_ENABLE
   #define RGB_MATRIX_LED_COUNT 36
   #define RGB_MATRIX_LED_FLUSH_LIMIT 16
-  #define RGB_MATRIX_STARTUP_VAL 150
+  #define RGB_MATRIX_DEFAULT_VAL 150
   #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200
  #endif
 

keyboards/ein_60/config.h

@@ -75,7 +75,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #ifdef RGB_MATRIX_ENABLE
 #    define RGB_MATRIX_LED_COUNT              38
 #    define RGB_MATRIX_LED_FLUSH_LIMIT    16
-#    define RGB_MATRIX_STARTUP_VAL        150
+#    define RGB_MATRIX_DEFAULT_VAL        150
 #    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200
 #endif
 

keyboards/feker/ik75/config.h

@@ -48,7 +48,7 @@
 #ifdef RGB_MATRIX_ENABLE
     #define RGB_MATRIX_LED_COUNT (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
     #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200
-    #define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
+    #define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
     #define RGB_MATRIX_KEYPRESSES
     #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 

keyboards/frooastboard/walnut/config.h

@@ -48,8 +48,8 @@
 #define ENABLE_RGB_MATRIX_PIXEL_FLOW
 
 #define RGB_MATRIX_LED_FLUSH_LIMIT 16
-#define RGB_MATRIX_STARTUP_HUE 0
+#define RGB_MATRIX_DEFAULT_HUE 0
-#define RGB_MATRIX_STARTUP_SAT 255
+#define RGB_MATRIX_DEFAULT_SAT 255
-#define RGB_MATRIX_STARTUP_SPD 191
+#define RGB_MATRIX_DEFAULT_SPD 191
-#define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
+#define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
-#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_RAINBOW_MOVING_CHEVRON
+#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_RAINBOW_MOVING_CHEVRON

keyboards/geekboards/macropad_v2/config.h

@@ -84,10 +84,10 @@
 #    define ENABLE_RGB_MATRIX_SOLID_SPLASH
 #    define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
 
-#    define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_UP_DOWN
+#    define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_UP_DOWN
-#    define RGB_MATRIX_STARTUP_SAT 255
+#    define RGB_MATRIX_DEFAULT_SAT 255
-#    define RGB_MATRIX_STARTUP_VAL 192
+#    define RGB_MATRIX_DEFAULT_VAL 192
-#    define RGB_MATRIX_STARTUP_SPD 30
+#    define RGB_MATRIX_DEFAULT_SPD 30
 #endif //RGB_MATRIX_ENABLE
 
 #define RGB_DISABLE_WHEN_USB_SUSPENDED

keyboards/gizmo_engineering/gk6/config.h

@@ -52,9 +52,9 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGB_DISABLE_WHEN_USB_SUSPENDED
 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 #define RGB_MATRIX_KEYPRESSES
-#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT
+#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT
-#define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
+#define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
-#define RGB_MATRIX_STARTUP_SPD 127
+#define RGB_MATRIX_DEFAULT_SPD 127
 
 // RGB Matrix Animation modes. Explicitly enabled
 // For full list of effects, see:

keyboards/gl516/j73gl/keymaps/via_rgb_matrix/config.h

@@ -35,11 +35,11 @@
   #define RGB_MATRIX_LED_PROCESS_LIMIT (RGB_MATRIX_LED_COUNT + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
   #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
   #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
-//  #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT // Sets the default mode, if none has been set
+//  #define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT // Sets the default mode, if none has been set
-  #define RGB_MATRIX_STARTUP_HUE 0 // Sets the default hue value, if none has been set
+  #define RGB_MATRIX_DEFAULT_HUE 0 // Sets the default hue value, if none has been set
-  #define RGB_MATRIX_STARTUP_SAT 255 // Sets the default saturation value, if none has been set
+  #define RGB_MATRIX_DEFAULT_SAT 255 // Sets the default saturation value, if none has been set
-  #define RGB_MATRIX_STARTUP_VAL 50 // Sets the default brightness value, if none has been set
+  #define RGB_MATRIX_DEFAULT_VAL 50 // Sets the default brightness value, if none has been set
-  #define RGB_MATRIX_STARTUP_SPD 127 // Sets the default animation speed, if none has been set
+  #define RGB_MATRIX_DEFAULT_SPD 127 // Sets the default animation speed, if none has been set
 //  #define RGB_MATRIX_DISABLE_KEYCODES // disables control of rgb matrix by keycodes (must use code functions to control the feature)
 //  #define RGB_MATRIX_SPLIT { X, Y }     // (Optional) For split keyboards, the number of LEDs connected on each half. X = left, Y = Right.
                                         // If RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is enabled, you also will want to enable SPLIT_TRANSPORT_MIRROR

keyboards/gmmk/pro/rev1/ansi/keymaps/andrewcharnley/config.h

@@ -19,6 +19,6 @@
 #define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_STATIC_LIGHT
 #define RGBLIGHT_DEFAULT_SAT 0
 #define RGB_DISABLE_WHEN_USB_SUSPENDED
-#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_COLOR
+#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_SOLID_COLOR
 
 

keyboards/gmmk/pro/rev1/ansi/keymaps/gigahawk/config.h

@@ -2,5 +2,5 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 #pragma once
 
-#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_COLOR
+#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_SOLID_COLOR
-#define RGB_MATRIX_STARTUP_SPD 0
+#define RGB_MATRIX_DEFAULT_SPD 0

keyboards/gmmk/pro/rev1/ansi/keymaps/gourdo1/config.h

@@ -52,11 +52,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     #define RGBLIGHT_VAL_STEP 17             // The number of steps to increment the brightness by (default 17)
 
     // Startup values, when none have been set
-    #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_REACTIVE // Sets the default effect mode, if none has been set (was RGB_MATRIX_SOLID_COLOR)
+    #define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_SOLID_REACTIVE // Sets the default effect mode, if none has been set (was RGB_MATRIX_SOLID_COLOR)
-    #define RGB_MATRIX_STARTUP_HUE 24                         // Sets the default hue value, if none has been set
+    #define RGB_MATRIX_DEFAULT_HUE 24                         // Sets the default hue value, if none has been set
-    #define RGB_MATRIX_STARTUP_SAT 255                        // Sets the default saturation value, if none has been set
+    #define RGB_MATRIX_DEFAULT_SAT 255                        // Sets the default saturation value, if none has been set
-    #define RGB_MATRIX_STARTUP_VAL 127                        // Sets the default brightness value, if none has been set
+    #define RGB_MATRIX_DEFAULT_VAL 127                        // Sets the default brightness value, if none has been set
-    #define RGB_MATRIX_STARTUP_SPD 127                        // Sets the default animation speed, if none has been set
+    #define RGB_MATRIX_DEFAULT_SPD 127                        // Sets the default animation speed, if none has been set
 
     // Uncomment any #undef line below to turn OFF any default enabled RGB background effect (enabled in keyboards/gmmk/pro/config.h).
     #undef ENABLE_RGB_MATRIX_ALPHAS_MODS                      // Solid color (seems redundant; seems same as RGB_MATRIX_SOLID_COLOR?)

keyboards/gmmk/pro/rev1/ansi/keymaps/jonavin/config.h

@@ -28,7 +28,7 @@
 #define TAPPING_TERM 180
 
 #ifdef RGB_MATRIX_ENABLE
-    #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_COLOR
+    #define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_SOLID_COLOR
     #define RGB_DISABLE_WHEN_USB_SUSPENDED
 #endif
 

keyboards/gmmk/pro/rev1/ansi/keymaps/macos/config.h

@@ -20,7 +20,7 @@
 #ifdef RGB_MATRIX_ENABLE
     #define RGB_MATRIX_TIMEOUT 1200000     // 20 minutes (20 * 60 * 1000ms)
 
-// #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_COLOR
+// #define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_SOLID_COLOR
 
 // Below added per: https://beta.docs.qmk.fm/using-qmk/hardware-features/lighting/feature_rgb_matrix#suspended-state-id-suspended-state
     #define RGB_DISABLE_WHEN_USB_SUSPENDED

keyboards/gmmk/pro/rev1/ansi/keymaps/mattgauf/config.h

@@ -26,7 +26,7 @@
 
 /* RGB Matrix Features */
 #define RGB_MATRIX_KEYPRESSES
-#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_COLOR
+#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_SOLID_COLOR
 #define RGB_DISABLE_WHEN_USB_SUSPENDED true
 
 /* RGB Matrix Framebuffer Config */

keyboards/gmmk/pro/rev1/ansi/keymaps/paddlegame/config.h

@@ -17,7 +17,7 @@
 #pragma once
 
 #ifdef RGB_MATRIX_ENABLE
-    #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_COLOR
+    #define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_SOLID_COLOR
 #    define RGB_DISABLE_WHEN_USB_SUSPENDED
 #endif
 

keyboards/gmmk/pro/rev1/ansi/keymaps/stickandgum/config.h

@@ -22,7 +22,7 @@
 // At the time of this, there are 41 effects! That may be a bit too many to cycle through - keeping what I believe is the best.
 #ifdef RGB_MATRIX_ENABLE
 
-// #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_COLOR
+// #define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_SOLID_COLOR
 
 // Below added per: https://beta.docs.qmk.fm/using-qmk/hardware-features/lighting/feature_rgb_matrix#suspended-state-id-suspended-state
     #define RGB_DISABLE_WHEN_USB_SUSPENDED

keyboards/gmmk/pro/rev1/iso/keymaps/gourdo1/config.h

@@ -52,11 +52,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
     #define RGBLIGHT_VAL_STEP 17             // The number of steps to increment the brightness by (default 17)
 
     // Startup values, when none have been set
-    #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_REACTIVE // Sets the default effect mode, if none has been set (was RGB_MATRIX_SOLID_COLOR)
+    #define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_SOLID_REACTIVE // Sets the default effect mode, if none has been set (was RGB_MATRIX_SOLID_COLOR)
-    #define RGB_MATRIX_STARTUP_HUE 24                         // Sets the default hue value, if none has been set
+    #define RGB_MATRIX_DEFAULT_HUE 24                         // Sets the default hue value, if none has been set
-    #define RGB_MATRIX_STARTUP_SAT 255                        // Sets the default saturation value, if none has been set
+    #define RGB_MATRIX_DEFAULT_SAT 255                        // Sets the default saturation value, if none has been set
-    #define RGB_MATRIX_STARTUP_VAL 127                        // Sets the default brightness value, if none has been set
+    #define RGB_MATRIX_DEFAULT_VAL 127                        // Sets the default brightness value, if none has been set
-    #define RGB_MATRIX_STARTUP_SPD 127                        // Sets the default animation speed, if none has been set
+    #define RGB_MATRIX_DEFAULT_SPD 127                        // Sets the default animation speed, if none has been set
 
     // Uncomment any #undef line below to turn OFF any default enabled RGB background effect (enabled in keyboards/gmmk/pro/config.h).
     #undef ENABLE_RGB_MATRIX_ALPHAS_MODS                      // Solid color (seems redundant; seems same as RGB_MATRIX_SOLID_COLOR?)

keyboards/gmmk/pro/rev1/iso/keymaps/jonavin/config.h

@@ -28,7 +28,7 @@
 #define TAPPING_TERM 180
 
 #ifdef RGB_MATRIX_ENABLE
-#    define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_COLOR
+#    define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_SOLID_COLOR
 #    define RGB_DISABLE_WHEN_USB_SUSPENDED
 #endif
 

keyboards/gmmk/pro/rev1/iso/keymaps/vitoni/config.h

@@ -4,7 +4,7 @@
 #pragma once
 
 #if defined(RGB_MATRIX_ENABLE)
-    #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_COLOR
+    #define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_SOLID_COLOR
      // number of milliseconds to wait until turning off RGB automatically
     #define RGB_MATRIX_TIMEOUT 300000 // 300 seconds / 5 min
     // start fading out before getting disabled

keyboards/gopolar/gg86/config.h

@@ -43,7 +43,7 @@
     #define RGB_DI_PIN E2
     #define RGB_MATRIX_LED_COUNT 100
     #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200
-    #define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
+    #define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
     #define RGB_MATRIX_KEYPRESSES
 
     /* RGB Matrix effect */

keyboards/handwired/dactyl_manuform/5x6/keymaps/thattolleyguy/config.h

@@ -41,7 +41,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
         { 32, 32  }
 #define SPLIT_TRANSPORT_MIRROR
 
-// #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_TYPING_HEATMAP // Sets the default mode, if none has been set
+// #define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_TYPING_HEATMAP // Sets the default mode, if none has been set
 #define ENABLE_RGB_MATRIX_TYPING_HEATMAP
 #define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
 

keyboards/handwired/hnah40rgb/config.h

@@ -55,7 +55,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
-#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set
+#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set
 // RGB Matrix Animation modes. Explicitly enabled
 // For full list of effects, see:
 // https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects

keyboards/horrortroll/chinese_pcb/devil68_pro/config.h

@@ -41,7 +41,7 @@
 #ifdef RGB_MATRIX_ENABLE
     #define RGB_MATRIX_LED_COUNT 86
     #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200
-    #define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
+    #define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
     #define RGB_MATRIX_KEYPRESSES
     #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 

keyboards/horrortroll/handwired_k552/config.h

@@ -64,7 +64,7 @@
 #ifdef RGB_MATRIX_ENABLE
     #define RGB_MATRIX_LED_COUNT 24
     #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200
-    #define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
+    #define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
 
     /* RGB Matrix config */
     #define RGB_DI_PIN C14

keyboards/ilumkb/simpler61/config.h

@@ -35,7 +35,7 @@
 #define RGB_MATRIX_KEYPRESSES
 #define RGB_MATRIX_LED_PROCESS_LIMIT 4
 #define RGB_MATRIX_LED_FLUSH_LIMIT 26
-#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL
+#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
 #define DRIVER_ADDR_1 0b0110000
 #define DRIVER_COUNT 1
 #define DRIVER_1_LED_TOTAL 61

keyboards/ilumkb/simpler64/config.h

@@ -35,7 +35,7 @@
 #define RGB_MATRIX_KEYPRESSES
 #define RGB_MATRIX_LED_PROCESS_LIMIT 4
 #define RGB_MATRIX_LED_FLUSH_LIMIT 26
-#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL
+#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
 #define DRIVER_ADDR_1 0b0110000
 #define DRIVER_COUNT 1
 #define DRIVER_1_LED_TOTAL 64

keyboards/input_club/k_type/k_type.c

@@ -224,10 +224,10 @@ void matrix_init_kb(void) {
      * Since K20x is stuck with a 32 byte EEPROM (see tmk_core/common/chibios/eeprom_teensy.c),
      * and neither led_matrix_eeconfig.speed or .flags fit in this boundary, just force their values to default on boot.
      */
-#    if !defined(RGB_MATRIX_STARTUP_SPD)
+#    if !defined(RGB_MATRIX_DEFAULT_SPD)
-#        define RGB_MATRIX_STARTUP_SPD UINT8_MAX / 2
+#        define RGB_MATRIX_DEFAULT_SPD UINT8_MAX / 2
 #    endif
-    rgb_matrix_set_speed(RGB_MATRIX_STARTUP_SPD),
+    rgb_matrix_set_speed(RGB_MATRIX_DEFAULT_SPD),
     rgb_matrix_set_flags(LED_FLAG_ALL);
 #endif
 

keyboards/input_club/k_type/keymaps/andrew-fahmy/config.h

@@ -20,7 +20,7 @@
 #ifdef RGB_MATRIX_ENABLE
 // #    define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 // #    define RGB_MATRIX_KEYPRESSES
-#    define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_RAINDROPS
+#    define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_RAINDROPS
 
 // #    define DEBUG_MATRIX_SCAN_RATE
 

keyboards/jadookb/jkb65/config.h

@@ -33,7 +33,7 @@
 #define RGB_MATRIX_TIMEOUT 90000
 #define RGB_MATRIX_LED_PROCESS_LIMIT 4
 #define RGB_MATRIX_LED_FLUSH_LIMIT 26
-#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL
+#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
 
  // RGB Matrix Animation modes. Explicitly enabled
  // For full list of effects, see:

keyboards/kbdfans/baguette66/rgb/config.h

@@ -75,7 +75,7 @@
 #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspendedz
 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
-#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL
+#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
 #define RGB_MATRIX_HUE_STEP 8
 #define RGB_MATRIX_SAT_STEP 8
 #define RGB_MATRIX_VAL_STEP 8

keyboards/kbdfans/bella/rgb/config.h

@@ -81,8 +81,8 @@
 // #    define ENABLE_RGB_MATRIX_MULTISPLASH
 #    define ENABLE_RGB_MATRIX_SOLID_SPLASH
 // #    define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
-//#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_COLOR
+//#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_SOLID_COLOR
-#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL
+#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
 #define DRIVER_ADDR_1 0b0110000
 #define DRIVER_COUNT 1
 #define RGB_MATRIX_LED_COUNT 108

keyboards/kbdfans/bella/rgb_iso/config.h

@@ -81,8 +81,8 @@
 // #    define ENABLE_RGB_MATRIX_MULTISPLASH
 #    define ENABLE_RGB_MATRIX_SOLID_SPLASH
 // #    define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
-//#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_COLOR
+//#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_SOLID_COLOR
-#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL
+#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
 #define DRIVER_ADDR_1 0b0110000
 #define DRIVER_COUNT 1
 #define RGB_MATRIX_LED_COUNT 109

keyboards/kbdfans/boop65/rgb/config.h

@@ -38,8 +38,8 @@
 #    define RGB_MATRIX_LED_PROCESS_LIMIT 4
 #    define RGB_MATRIX_LED_FLUSH_LIMIT 26
 #    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
-#    define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS // Sets the default brightness value, if none has been set
+#    define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS // Sets the default brightness value, if none has been set
-#    define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL
+#    define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
 #    define DRIVER_ADDR_1 0b0110000
 #    define DRIVER_COUNT 1
 #    define RGB_MATRIX_LED_COUNT 83

keyboards/kbdfans/kbd67/mkiirgb/keymaps/jonavin/config.h

@@ -28,10 +28,10 @@
 #define TAPPING_TERM 180
 
 #ifdef RGB_MATRIX_ENABLE
-    #ifdef RGB_MATRIX_STARTUP_MODE
+    #ifdef RGB_MATRIX_DEFAULT_MODE
-        #undef RGB_MATRIX_STARTUP_MODE
+        #undef RGB_MATRIX_DEFAULT_MODE
     #endif
-    #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_COLOR
+    #define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_SOLID_COLOR
     #define RGB_DISABLE_WHEN_USB_SUSPENDED
 #endif
 

keyboards/kbdfans/kbd67/mkiirgb/keymaps/spx01/config.h

@@ -37,5 +37,5 @@
 #define RETRO_TAPPING
 #define PERMISSIVE_HOLD
 
-#undef RGB_MATRIX_STARTUP_MODE
+#undef RGB_MATRIX_DEFAULT_MODE
-#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CUSTOM_RGB_STATIC
+#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CUSTOM_RGB_STATIC

keyboards/kbdfans/kbd67/mkiirgb/v1/config.h

@@ -62,7 +62,7 @@
 // #define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
 
 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200
-#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL
+#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
 #define DRIVER_ADDR_1 0b1110100
 #define DRIVER_ADDR_2 0b1110111
 #define DRIVER_COUNT 2

keyboards/kbdfans/kbd67/mkiirgb/v2/config.h

@@ -12,7 +12,7 @@
 #define DEBOUNCE 3
 #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
 #define RGB_MATRIX_KEYPRESSES
-#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL
+#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
 // RGB Matrix Animation modes. Explicitly enabled
 // For full list of effects, see:
 // https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects

keyboards/kbdfans/kbd67/mkiirgb/v3/config.h

@@ -85,7 +85,7 @@
 
 #define RGB_MATRIX_LED_PROCESS_LIMIT 4
 #define RGB_MATRIX_LED_FLUSH_LIMIT 26
-#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL
+#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
 #define DRIVER_ADDR_1 0b0110000
 #define DRIVER_COUNT 1
 #define RGB_MATRIX_LED_COUNT 67

keyboards/kbdfans/kbd67/mkiirgb/v4/config.h

@@ -50,7 +50,7 @@
 #    define RGB_DISABLE_WHEN_USB_SUSPENDED  // turn off effects when suspended
 #    define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 #    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150  // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
-#    define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL
+#    define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
 #    define RGB_MATRIX_HUE_STEP 8
 #    define RGB_MATRIX_SAT_STEP 8
 #    define RGB_MATRIX_VAL_STEP 8

keyboards/kbdfans/kbd67/mkiirgb_iso/config.h

@@ -39,7 +39,7 @@
 #    define RGB_DISABLE_WHEN_USB_SUSPENDED  // turn off effects when suspended
 #    define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 #    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150  // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
-#    define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL
+#    define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
 #    define RGB_MATRIX_HUE_STEP 8
 #    define RGB_MATRIX_SAT_STEP 8
 #    define RGB_MATRIX_VAL_STEP 8

keyboards/kbdfans/kbd75rgb/config.h

@@ -75,7 +75,7 @@
 #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspendedz
 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash.
-#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL
+#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
 #define RGB_MATRIX_HUE_STEP 8
 #define RGB_MATRIX_SAT_STEP 8
 #define RGB_MATRIX_VAL_STEP 8

keyboards/kbdfans/maja/config.h

@@ -62,7 +62,7 @@
 // #define ENABLE_RGB_MATRIX_SOLID_SPLASH
 // #define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
 
-#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL
+#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
 #define DRIVER_ADDR_1 0b1110100
 #define DRIVER_ADDR_2 0b1110110
 #define DRIVER_COUNT 2

keyboards/kbdfans/odin/rgb/config.h

@@ -33,7 +33,7 @@
 #define RGB_MATRIX_KEYPRESSES 
 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS
 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150
-#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL
+#define RGB_MATRIX_DEFAULT_MODE RGB_MATRIX_CYCLE_ALL
 #define ENABLE_RGB_MATRIX_ALPHAS_MODS
 #define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
 #define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT

keyboards/keebio/bamfk4/config.h

@@ -80,7 +80,7 @@
 #        define ENABLE_RGB_MATRIX_SOLID_SPLASH
 #        define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
 #        define RGB_MATRIX_MAXIMUM_BRIGHTNESS 160
-#        define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
+#        define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
 #        define RGB_MATRIX_LED_COUNT RGBLED_NUM
 #        define RGB_DISABLE_WHEN_USB_SUSPENDED
 #        define RGB_MATRIX_KEYPRESSES

keyboards/keebio/iris/rev6/config.h

@@ -112,7 +112,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #        define ENABLE_RGB_MATRIX_SOLID_SPLASH
 #        define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
 #        define RGB_MATRIX_MAXIMUM_BRIGHTNESS 160
-#        define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
+#        define RGB_MATRIX_DEFAULT_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
 #        define RGB_MATRIX_LED_COUNT RGBLED_NUM
 #        define RGB_MATRIX_SPLIT { 34, 34 }
 #        define RGB_DISABLE_WHEN_USB_SUSPENDED