[Keybooard] Update of Ergodash Keyboard (#5772)
* Simpler coding use SPLIT_KEYBOARD delete rev1 (rev2→rev1) because rev1is not sold * delete USE_I2C = no * Update readme.mdplanck-ez-a5-high
omkbd
6 years ago
committed by
Drashna Jaelre
parent
63d53b0f28
commit
eb9ea84927
@ -1,162 +0,0 @@ |
||||
#include <util/twi.h> |
||||
#include <avr/io.h> |
||||
#include <stdlib.h> |
||||
#include <avr/interrupt.h> |
||||
#include <util/twi.h> |
||||
#include <stdbool.h> |
||||
#include "i2c.h" |
||||
|
||||
#ifdef USE_I2C |
||||
|
||||
// Limits the amount of we wait for any one i2c transaction.
|
||||
// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is
|
||||
// 9 bits, a single transaction will take around 90μs to complete.
|
||||
//
|
||||
// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit
|
||||
// poll loop takes at least 8 clock cycles to execute
|
||||
#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8 |
||||
|
||||
#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE) |
||||
|
||||
volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; |
||||
|
||||
static volatile uint8_t slave_buffer_pos; |
||||
static volatile bool slave_has_register_set = false; |
||||
|
||||
// Wait for an i2c operation to finish
|
||||
inline static |
||||
void i2c_delay(void) { |
||||
uint16_t lim = 0; |
||||
while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT) |
||||
lim++; |
||||
|
||||
// easier way, but will wait slightly longer
|
||||
// _delay_us(100);
|
||||
} |
||||
|
||||
// Setup twi to run at 100kHz
|
||||
void i2c_master_init(void) { |
||||
// no prescaler
|
||||
TWSR = 0; |
||||
// Set TWI clock frequency to SCL_CLOCK. Need TWBR>10.
|
||||
// Check datasheets for more info.
|
||||
TWBR = ((F_CPU/SCL_CLOCK)-16)/2; |
||||
} |
||||
|
||||
// Start a transaction with the given i2c slave address. The direction of the
|
||||
// transfer is set with I2C_READ and I2C_WRITE.
|
||||
// returns: 0 => success
|
||||
// 1 => error
|
||||
uint8_t i2c_master_start(uint8_t address) { |
||||
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA); |
||||
|
||||
i2c_delay(); |
||||
|
||||
// check that we started successfully
|
||||
if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START)) |
||||
return 1; |
||||
|
||||
TWDR = address; |
||||
TWCR = (1<<TWINT) | (1<<TWEN); |
||||
|
||||
i2c_delay(); |
||||
|
||||
if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) ) |
||||
return 1; // slave did not acknowledge
|
||||
else |
||||
return 0; // success
|
||||
} |
||||
|
||||
|
||||
// Finish the i2c transaction.
|
||||
void i2c_master_stop(void) { |
||||
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO); |
||||
|
||||
uint16_t lim = 0; |
||||
while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT) |
||||
lim++; |
||||
} |
||||
|
||||
// Write one byte to the i2c slave.
|
||||
// returns 0 => slave ACK
|
||||
// 1 => slave NACK
|
||||
uint8_t i2c_master_write(uint8_t data) { |
||||
TWDR = data; |
||||
TWCR = (1<<TWINT) | (1<<TWEN); |
||||
|
||||
i2c_delay(); |
||||
|
||||
// check if the slave acknowledged us
|
||||
return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1; |
||||
} |
||||
|
||||
// Read one byte from the i2c slave. If ack=1 the slave is acknowledged,
|
||||
// if ack=0 the acknowledge bit is not set.
|
||||
// returns: byte read from i2c device
|
||||
uint8_t i2c_master_read(int ack) { |
||||
TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA); |
||||
|
||||
i2c_delay(); |
||||
return TWDR; |
||||
} |
||||
|
||||
void i2c_reset_state(void) { |
||||
TWCR = 0; |
||||
} |
||||
|
||||
void i2c_slave_init(uint8_t address) { |
||||
TWAR = address << 0; // slave i2c address
|
||||
// TWEN - twi enable
|
||||
// TWEA - enable address acknowledgement
|
||||
// TWINT - twi interrupt flag
|
||||
// TWIE - enable the twi interrupt
|
||||
TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN); |
||||
} |
||||
|
||||
ISR(TWI_vect); |
||||
|
||||
ISR(TWI_vect) { |
||||
uint8_t ack = 1; |
||||
switch(TW_STATUS) { |
||||
case TW_SR_SLA_ACK: |
||||
// this device has been addressed as a slave receiver
|
||||
slave_has_register_set = false; |
||||
break; |
||||
|
||||
case TW_SR_DATA_ACK: |
||||
// this device has received data as a slave receiver
|
||||
// The first byte that we receive in this transaction sets the location
|
||||
// of the read/write location of the slaves memory that it exposes over
|
||||
// i2c. After that, bytes will be written at slave_buffer_pos, incrementing
|
||||
// slave_buffer_pos after each write.
|
||||
if(!slave_has_register_set) { |
||||
slave_buffer_pos = TWDR; |
||||
// don't acknowledge the master if this memory loctaion is out of bounds
|
||||
if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) { |
||||
ack = 0; |
||||
slave_buffer_pos = 0; |
||||
} |
||||
slave_has_register_set = true; |
||||
} else { |
||||
i2c_slave_buffer[slave_buffer_pos] = TWDR; |
||||
BUFFER_POS_INC(); |
||||
} |
||||
break; |
||||
|
||||
case TW_ST_SLA_ACK: |
||||
case TW_ST_DATA_ACK: |
||||
// master has addressed this device as a slave transmitter and is
|
||||
// requesting data.
|
||||
TWDR = i2c_slave_buffer[slave_buffer_pos]; |
||||
BUFFER_POS_INC(); |
||||
break; |
||||
|
||||
case TW_BUS_ERROR: // something went wrong, reset twi state
|
||||
TWCR = 0; |
||||
default: |
||||
break; |
||||
} |
||||
// Reset everything, so we are ready for the next TWI interrupt
|
||||
TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN); |
||||
} |
||||
#endif |
||||
@ -1,49 +0,0 @@ |
||||
#ifndef I2C_H |
||||
#define I2C_H |
||||
|
||||
#include <stdint.h> |
||||
|
||||
#ifndef F_CPU |
||||
#define F_CPU 16000000UL |
||||
#endif |
||||
|
||||
#define I2C_READ 1 |
||||
#define I2C_WRITE 0 |
||||
|
||||
#define I2C_ACK 1 |
||||
#define I2C_NACK 0 |
||||
|
||||
#define SLAVE_BUFFER_SIZE 0x10 |
||||
|
||||
// i2c SCL clock frequency
|
||||
#define SCL_CLOCK 400000L |
||||
|
||||
extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; |
||||
|
||||
void i2c_master_init(void); |
||||
uint8_t i2c_master_start(uint8_t address); |
||||
void i2c_master_stop(void); |
||||
uint8_t i2c_master_write(uint8_t data); |
||||
uint8_t i2c_master_read(int); |
||||
void i2c_reset_state(void); |
||||
void i2c_slave_init(uint8_t address); |
||||
|
||||
|
||||
static inline unsigned char i2c_start_read(unsigned char addr) { |
||||
return i2c_master_start((addr << 1) | I2C_READ); |
||||
} |
||||
|
||||
static inline unsigned char i2c_start_write(unsigned char addr) { |
||||
return i2c_master_start((addr << 1) | I2C_WRITE); |
||||
} |
||||
|
||||
// from SSD1306 scrips
|
||||
extern unsigned char i2c_rep_start(unsigned char addr); |
||||
extern void i2c_start_wait(unsigned char addr); |
||||
extern unsigned char i2c_readAck(void); |
||||
extern unsigned char i2c_readNak(void); |
||||
extern unsigned char i2c_read(unsigned char ack); |
||||
|
||||
#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak(); |
||||
|
||||
#endif |
||||
@ -1,490 +0,0 @@ |
||||
/*
|
||||
Copyright 2017 Danny Nguyen <danny@keeb.io> |
||||
|
||||
This program is free software: you can redistribute it and/or modify |
||||
it under the terms of the GNU General Public License as published by |
||||
the Free Software Foundation, either version 2 of the License, or |
||||
(at your option) any later version. |
||||
|
||||
This program is distributed in the hope that it will be useful, |
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
GNU General Public License for more details. |
||||
|
||||
You should have received a copy of the GNU General Public License |
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/ |
||||
|
||||
/*
|
||||
* scan matrix |
||||
*/ |
||||
#include <stdint.h> |
||||
#include <stdbool.h> |
||||
#include <avr/io.h> |
||||
#include "wait.h" |
||||
#include "print.h" |
||||
#include "debug.h" |
||||
#include "util.h" |
||||
#include "matrix.h" |
||||
#include "split_util.h" |
||||
#include "pro_micro.h" |
||||
#include "config.h" |
||||
#include "timer.h" |
||||
|
||||
#ifdef BACKLIGHT_ENABLE |
||||
#include "backlight.h" |
||||
extern backlight_config_t backlight_config; |
||||
#endif |
||||
|
||||
#ifdef USE_I2C |
||||
# include "i2c.h" |
||||
#else // USE_SERIAL
|
||||
# include "serial.h" |
||||
#endif |
||||
|
||||
#ifndef DEBOUNCING_DELAY |
||||
# define DEBOUNCING_DELAY 5 |
||||
#endif |
||||
|
||||
#if (DEBOUNCING_DELAY > 0) |
||||
static uint16_t debouncing_time; |
||||
static bool debouncing = false; |
||||
#endif |
||||
|
||||
#if (MATRIX_COLS <= 8) |
||||
# define print_matrix_header() print("\nr/c 01234567\n") |
||||
# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) |
||||
# define matrix_bitpop(i) bitpop(matrix[i]) |
||||
# define ROW_SHIFTER ((uint8_t)1) |
||||
#else |
||||
# error "Currently only supports 8 COLS" |
||||
#endif |
||||
static matrix_row_t matrix_debouncing[MATRIX_ROWS]; |
||||
|
||||
#define ERROR_DISCONNECT_COUNT 5 |
||||
|
||||
#define SERIAL_LED_ADDR 0x00 |
||||
|
||||
#define ROWS_PER_HAND (MATRIX_ROWS/2) |
||||
|
||||
static uint8_t error_count = 0; |
||||
|
||||
static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; |
||||
static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; |
||||
|
||||
/* matrix state(1:on, 0:off) */ |
||||
static matrix_row_t matrix[MATRIX_ROWS]; |
||||
static matrix_row_t matrix_debouncing[MATRIX_ROWS]; |
||||
|
||||
#if (DIODE_DIRECTION == COL2ROW) |
||||
static void init_cols(void); |
||||
static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row); |
||||
static void unselect_rows(void); |
||||
static void select_row(uint8_t row); |
||||
static void unselect_row(uint8_t row); |
||||
#elif (DIODE_DIRECTION == ROW2COL) |
||||
static void init_rows(void); |
||||
static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col); |
||||
static void unselect_cols(void); |
||||
static void unselect_col(uint8_t col); |
||||
static void select_col(uint8_t col); |
||||
#endif |
||||
|
||||
__attribute__ ((weak)) |
||||
void matrix_init_kb(void) { |
||||
matrix_init_user(); |
||||
} |
||||
|
||||
__attribute__ ((weak)) |
||||
void matrix_scan_kb(void) { |
||||
matrix_scan_user(); |
||||
} |
||||
|
||||
__attribute__ ((weak)) |
||||
void matrix_init_user(void) { |
||||
} |
||||
|
||||
__attribute__ ((weak)) |
||||
void matrix_scan_user(void) { |
||||
} |
||||
|
||||
inline |
||||
uint8_t matrix_rows(void) |
||||
{ |
||||
return MATRIX_ROWS; |
||||
} |
||||
|
||||
inline |
||||
uint8_t matrix_cols(void) |
||||
{ |
||||
return MATRIX_COLS; |
||||
} |
||||
|
||||
void matrix_init(void) |
||||
{ |
||||
debug_enable = true; |
||||
debug_matrix = true; |
||||
debug_mouse = true; |
||||
// initialize row and col
|
||||
#if (DIODE_DIRECTION == COL2ROW) |
||||
unselect_rows(); |
||||
init_cols(); |
||||
#elif (DIODE_DIRECTION == ROW2COL) |
||||
unselect_cols(); |
||||
init_rows(); |
||||
#endif |
||||
|
||||
TX_RX_LED_INIT; |
||||
|
||||
// initialize matrix state: all keys off
|
||||
for (uint8_t i=0; i < MATRIX_ROWS; i++) { |
||||
matrix[i] = 0; |
||||
matrix_debouncing[i] = 0; |
||||
} |
||||
|
||||
matrix_init_quantum(); |
||||
|
||||
} |
||||
|
||||
uint8_t _matrix_scan(void) |
||||
{ |
||||
int offset = isLeftHand ? 0 : (ROWS_PER_HAND); |
||||
#if (DIODE_DIRECTION == COL2ROW) |
||||
// Set row, read cols
|
||||
for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) { |
||||
# if (DEBOUNCING_DELAY > 0) |
||||
bool matrix_changed = read_cols_on_row(matrix_debouncing+offset, current_row); |
||||
|
||||
if (matrix_changed) { |
||||
debouncing = true; |
||||
debouncing_time = timer_read(); |
||||
PORTD ^= (1 << 2); |
||||
} |
||||
|
||||
# else |
||||
read_cols_on_row(matrix+offset, current_row); |
||||
# endif |
||||
|
||||
} |
||||
|
||||
#elif (DIODE_DIRECTION == ROW2COL) |
||||
// Set col, read rows
|
||||
for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { |
||||
# if (DEBOUNCING_DELAY > 0) |
||||
bool matrix_changed = read_rows_on_col(matrix_debouncing+offset, current_col); |
||||
if (matrix_changed) { |
||||
debouncing = true; |
||||
debouncing_time = timer_read(); |
||||
} |
||||
# else |
||||
read_rows_on_col(matrix+offset, current_col); |
||||
# endif |
||||
|
||||
} |
||||
#endif |
||||
|
||||
# if (DEBOUNCING_DELAY > 0) |
||||
if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) { |
||||
for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { |
||||
matrix[i+offset] = matrix_debouncing[i+offset]; |
||||
} |
||||
debouncing = false; |
||||
} |
||||
# endif |
||||
|
||||
return 1; |
||||
} |
||||
|
||||
#ifdef USE_I2C |
||||
|
||||
// Get rows from other half over i2c
|
||||
int i2c_transaction(void) { |
||||
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; |
||||
|
||||
int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); |
||||
if (err) goto i2c_error; |
||||
|
||||
// start of matrix stored at 0x00
|
||||
err = i2c_master_write(0x00); |
||||
if (err) goto i2c_error; |
||||
|
||||
#ifdef BACKLIGHT_ENABLE |
||||
// Write backlight level for slave to read
|
||||
err = i2c_master_write(backlight_config.enable ? backlight_config.level : 0); |
||||
#else |
||||
// Write zero, so our byte index is the same
|
||||
err = i2c_master_write(0x00); |
||||
#endif |
||||
if (err) goto i2c_error; |
||||
|
||||
// Start read
|
||||
err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ); |
||||
if (err) goto i2c_error; |
||||
|
||||
if (!err) { |
||||
int i; |
||||
for (i = 0; i < ROWS_PER_HAND-1; ++i) { |
||||
matrix[slaveOffset+i] = i2c_master_read(I2C_ACK); |
||||
} |
||||
matrix[slaveOffset+i] = i2c_master_read(I2C_NACK); |
||||
i2c_master_stop(); |
||||
} else { |
||||
i2c_error: // the cable is disconnceted, or something else went wrong
|
||||
i2c_reset_state(); |
||||
return err; |
||||
} |
||||
|
||||
return 0; |
||||
} |
||||
|
||||
#else // USE_SERIAL
|
||||
|
||||
int serial_transaction(void) { |
||||
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; |
||||
|
||||
if (serial_update_buffers()) { |
||||
return 1; |
||||
} |
||||
|
||||
for (int i = 0; i < ROWS_PER_HAND; ++i) { |
||||
matrix[slaveOffset+i] = serial_slave_buffer[i]; |
||||
} |
||||
|
||||
#ifdef BACKLIGHT_ENABLE |
||||
// Write backlight level for slave to read
|
||||
serial_master_buffer[SERIAL_LED_ADDR] = backlight_config.enable ? backlight_config.level : 0; |
||||
#endif |
||||
return 0; |
||||
} |
||||
#endif |
||||
|
||||
uint8_t matrix_scan(void) |
||||
{ |
||||
uint8_t ret = _matrix_scan(); |
||||
|
||||
#ifdef USE_I2C |
||||
if( i2c_transaction() ) { |
||||
#else // USE_SERIAL
|
||||
if( serial_transaction() ) { |
||||
#endif |
||||
// turn on the indicator led when halves are disconnected
|
||||
TXLED1; |
||||
|
||||
error_count++; |
||||
|
||||
if (error_count > ERROR_DISCONNECT_COUNT) { |
||||
// reset other half if disconnected
|
||||
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; |
||||
for (int i = 0; i < ROWS_PER_HAND; ++i) { |
||||
matrix[slaveOffset+i] = 0; |
||||
} |
||||
} |
||||
} else { |
||||
// turn off the indicator led on no error
|
||||
TXLED0; |
||||
error_count = 0; |
||||
} |
||||
matrix_scan_quantum(); |
||||
return ret; |
||||
} |
||||
|
||||
void matrix_slave_scan(void) { |
||||
_matrix_scan(); |
||||
|
||||
int offset = (isLeftHand) ? 0 : ROWS_PER_HAND; |
||||
|
||||
#ifdef USE_I2C |
||||
#ifdef BACKLIGHT_ENABLE |
||||
// Read backlight level sent from master and update level on slave
|
||||
backlight_set(i2c_slave_buffer[0]); |
||||
#endif |
||||
for (int i = 0; i < ROWS_PER_HAND; ++i) { |
||||
i2c_slave_buffer[i+1] = matrix[offset+i]; |
||||
} |
||||
#else // USE_SERIAL
|
||||
for (int i = 0; i < ROWS_PER_HAND; ++i) { |
||||
serial_slave_buffer[i] = matrix[offset+i]; |
||||
} |
||||
|
||||
#ifdef BACKLIGHT_ENABLE |
||||
// Read backlight level sent from master and update level on slave
|
||||
backlight_set(serial_master_buffer[SERIAL_LED_ADDR]); |
||||
#endif |
||||
#endif |
||||
} |
||||
|
||||
bool matrix_is_modified(void) |
||||
{ |
||||
if (debouncing) return false; |
||||
return true; |
||||
} |
||||
|
||||
inline |
||||
bool matrix_is_on(uint8_t row, uint8_t col) |
||||
{ |
||||
return (matrix[row] & ((matrix_row_t)1<<col)); |
||||
} |
||||
|
||||
inline |
||||
matrix_row_t matrix_get_row(uint8_t row) |
||||
{ |
||||
return matrix[row]; |
||||
} |
||||
|
||||
void matrix_print(void) |
||||
{ |
||||
print("\nr/c 0123456789ABCDEF\n"); |
||||
for (uint8_t row = 0; row < MATRIX_ROWS; row++) { |
||||
phex(row); print(": "); |
||||
pbin_reverse16(matrix_get_row(row)); |
||||
print("\n"); |
||||
} |
||||
} |
||||
|
||||
uint8_t matrix_key_count(void) |
||||
{ |
||||
uint8_t count = 0; |
||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) { |
||||
count += bitpop16(matrix[i]); |
||||
} |
||||
return count; |
||||
} |
||||
|
||||
#if (DIODE_DIRECTION == COL2ROW) |
||||
|
||||
static void init_cols(void) |
||||
{ |
||||
for(uint8_t x = 0; x < MATRIX_COLS; x++) { |
||||
uint8_t pin = col_pins[x]; |
||||
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
|
||||
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
|
||||
} |
||||
} |
||||
|
||||
static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) |
||||
{ |
||||
// Store last value of row prior to reading
|
||||
matrix_row_t last_row_value = current_matrix[current_row]; |
||||
|
||||
// Clear data in matrix row
|
||||
current_matrix[current_row] = 0; |
||||
|
||||
// Select row and wait for row selecton to stabilize
|
||||
select_row(current_row); |
||||
wait_us(30); |
||||
|
||||
// For each col...
|
||||
for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) { |
||||
|
||||
// Select the col pin to read (active low)
|
||||
uint8_t pin = col_pins[col_index]; |
||||
uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF)); |
||||
|
||||
// Populate the matrix row with the state of the col pin
|
||||
current_matrix[current_row] |= pin_state ? 0 : (ROW_SHIFTER << col_index); |
||||
} |
||||
|
||||
// Unselect row
|
||||
unselect_row(current_row); |
||||
|
||||
return (last_row_value != current_matrix[current_row]); |
||||
} |
||||
|
||||
static void select_row(uint8_t row) |
||||
{ |
||||
uint8_t pin = row_pins[row]; |
||||
_SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT
|
||||
_SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
|
||||
} |
||||
|
||||
static void unselect_row(uint8_t row) |
||||
{ |
||||
uint8_t pin = row_pins[row]; |
||||
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
|
||||
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
|
||||
} |
||||
|
||||
static void unselect_rows(void) |
||||
{ |
||||
for(uint8_t x = 0; x < ROWS_PER_HAND; x++) { |
||||
uint8_t pin = row_pins[x]; |
||||
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
|
||||
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
|
||||
} |
||||
} |
||||
|
||||
#elif (DIODE_DIRECTION == ROW2COL) |
||||
|
||||
static void init_rows(void) |
||||
{ |
||||
for(uint8_t x = 0; x < ROWS_PER_HAND; x++) { |
||||
uint8_t pin = row_pins[x]; |
||||
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
|
||||
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
|
||||
} |
||||
} |
||||
|
||||
static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) |
||||
{ |
||||
bool matrix_changed = false; |
||||
|
||||
// Select col and wait for col selecton to stabilize
|
||||
select_col(current_col); |
||||
wait_us(30); |
||||
|
||||
// For each row...
|
||||
for(uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++) |
||||
{ |
||||
|
||||
// Store last value of row prior to reading
|
||||
matrix_row_t last_row_value = current_matrix[row_index]; |
||||
|
||||
// Check row pin state
|
||||
if ((_SFR_IO8(row_pins[row_index] >> 4) & _BV(row_pins[row_index] & 0xF)) == 0) |
||||
{ |
||||
// Pin LO, set col bit
|
||||
current_matrix[row_index] |= (ROW_SHIFTER << current_col); |
||||
} |
||||
else |
||||
{ |
||||
// Pin HI, clear col bit
|
||||
current_matrix[row_index] &= ~(ROW_SHIFTER << current_col); |
||||
} |
||||
|
||||
// Determine if the matrix changed state
|
||||
if ((last_row_value != current_matrix[row_index]) && !(matrix_changed)) |
||||
{ |
||||
matrix_changed = true; |
||||
} |
||||
} |
||||
|
||||
// Unselect col
|
||||
unselect_col(current_col); |
||||
|
||||
return matrix_changed; |
||||
} |
||||
|
||||
static void select_col(uint8_t col) |
||||
{ |
||||
uint8_t pin = col_pins[col]; |
||||
_SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT
|
||||
_SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
|
||||
} |
||||
|
||||
static void unselect_col(uint8_t col) |
||||
{ |
||||
uint8_t pin = col_pins[col]; |
||||
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
|
||||
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
|
||||
} |
||||
|
||||
static void unselect_cols(void) |
||||
{ |
||||
for(uint8_t x = 0; x < MATRIX_COLS; x++) { |
||||
uint8_t pin = col_pins[x]; |
||||
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
|
||||
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
|
||||
} |
||||
} |
||||
|
||||
#endif |
||||
@ -0,0 +1,3 @@ |
||||
BACKLIGHT_ENABLE = no
|
||||
RGBLIGHT_ENABLE = no
|
||||
AUDIO_ENABLE = no
|
||||
@ -1,2 +1,3 @@ |
||||
BACKLIGHT_ENABLE = no
|
||||
RGBLIGHT_ENABLE = no
|
||||
AUDIO_ENABLE = no
|
||||
|
||||
@ -1,13 +1,13 @@ |
||||
{ |
||||
"keyboard_name": "ErgoDash rev1", |
||||
"keyboard_name": "ErgoDash rev2", |
||||
"url": "", |
||||
"maintainer": "qmk", |
||||
"width": 16, |
||||
"width": 18, |
||||
"height": 6.25, |
||||
"layouts": { |
||||
"LAYOUT": { |
||||
"key_count": 68, |
||||
"layout": [{"label":"L00", "x":0, "y":0.375}, {"label":"L01", "x":1, "y":0.375}, {"label":"L02", "x":2, "y":0.125}, {"label":"L03", "x":3, "y":0}, {"label":"L04", "x":4, "y":0.125}, {"label":"L05", "x":5, "y":0.25}, {"label":"L06", "x":6, "y":0.75}, {"label":"R00", "x":9, "y":0.75}, {"label":"R01", "x":10, "y":0.25}, {"label":"R02", "x":11, "y":0.125}, {"label":"R03", "x":12, "y":0}, {"label":"R04", "x":13, "y":0.125}, {"label":"R05", "x":14, "y":0.375}, {"label":"R06", "x":15, "y":0.375}, {"label":"L10", "x":0, "y":1.375}, {"label":"L11", "x":1, "y":1.375}, {"label":"L12", "x":2, "y":1.125}, {"label":"L13", "x":3, "y":1}, {"label":"L14", "x":4, "y":1.125}, {"label":"L15", "x":5, "y":1.25}, {"label":"L16", "x":6, "y":1.75}, {"label":"R10", "x":9, "y":1.75}, {"label":"R11", "x":10, "y":1.25}, {"label":"R12", "x":11, "y":1.125}, {"label":"R13", "x":12, "y":1}, {"label":"R14", "x":13, "y":1.125}, {"label":"R15", "x":14, "y":1.375}, {"label":"R16", "x":15, "y":1.375}, {"label":"L20", "x":0, "y":2.375}, {"label":"L21", "x":1, "y":2.375}, {"label":"L22", "x":2, "y":2.125}, {"label":"L23", "x":3, "y":2}, {"label":"L24", "x":4, "y":2.125}, {"label":"L25", "x":5, "y":2.25}, {"label":"L26", "x":6, "y":2.75}, {"label":"R20", "x":9, "y":2.75}, {"label":"R21", "x":10, "y":2.25}, {"label":"R22", "x":11, "y":2.125}, {"label":"R23", "x":12, "y":2}, {"label":"R24", "x":13, "y":2.125}, {"label":"R25", "x":14, "y":2.375}, {"label":"R26", "x":15, "y":2.375}, {"label":"L30", "x":0, "y":3.375}, {"label":"L31", "x":1, "y":3.375}, {"label":"L32", "x":2, "y":3.125}, {"label":"L33", "x":3, "y":3}, {"label":"L34", "x":4, "y":3.125}, {"label":"L35", "x":5, "y":3.25}, {"label":"L36", "x":6.5, "y":4.25}, {"label":"R30", "x":8.5, "y":4.25}, {"label":"R31", "x":10, "y":3.25}, {"label":"R32", "x":11, "y":3.125}, {"label":"R33", "x":12, "y":3}, {"label":"R34", "x":13, "y":3.125}, {"label":"R35", "x":14, "y":3.375}, {"label":"R36", "x":15, "y":3.375}, {"label":"LT0", "x":0, "y":4.375}, {"label":"LT1", "x":1, "y":4.375}, {"label":"LT2", "x":2, "y":4.125}, {"label":"LT3", "x":3, "y":4}, {"label":"LT4", "x":5.5, "y":5.25}, {"label":"LT5", "x":6.5, "y":5.25}, {"label":"RT0", "x":8.5, "y":5.25}, {"label":"RT1", "x":9.5, "y":5.25}, {"label":"RT2", "x":12, "y":4}, {"label":"RT3", "x":13, "y":4.125}, {"label":"RT4", "x":14, "y":4.375}, {"label":"RT5", "x":15, "y":4.375}] |
||||
"key_count": 70, |
||||
"layout": [{"label":"L00", "x":0, "y":0.375}, {"label":"L01", "x":1, "y":0.375}, {"label":"L02", "x":2, "y":0.125}, {"label":"L03", "x":3, "y":0}, {"label":"L04", "x":4, "y":0.125}, {"label":"L05", "x":5, "y":0.25}, {"label":"L06", "x":6, "y":0.75}, {"label":"R00", "x":11, "y":0.75}, {"label":"R01", "x":12, "y":0.25}, {"label":"R02", "x":13, "y":0.125}, {"label":"R03", "x":14, "y":0}, {"label":"R04", "x":15, "y":0.125}, {"label":"R05", "x":16, "y":0.375}, {"label":"R06", "x":17, "y":0.375}, {"label":"L10", "x":0, "y":1.375}, {"label":"L11", "x":1, "y":1.375}, {"label":"L12", "x":2, "y":1.125}, {"label":"L13", "x":3, "y":1}, {"label":"L14", "x":4, "y":1.125}, {"label":"L15", "x":5, "y":1.25}, {"label":"L16", "x":6, "y":1.75}, {"label":"R10", "x":11, "y":1.75}, {"label":"R11", "x":12, "y":1.25}, {"label":"R12", "x":13, "y":1.125}, {"label":"R13", "x":14, "y":1}, {"label":"R14", "x":15, "y":1.125}, {"label":"R15", "x":16, "y":1.375}, {"label":"R16", "x":17, "y":1.375}, {"label":"L20", "x":0, "y":2.375}, {"label":"L21", "x":1, "y":2.375}, {"label":"L22", "x":2, "y":2.125}, {"label":"L23", "x":3, "y":2}, {"label":"L24", "x":4, "y":2.125}, {"label":"L25", "x":5, "y":2.25}, {"label":"L26", "x":6, "y":2.75}, {"label":"R20", "x":11, "y":2.75}, {"label":"R21", "x":12, "y":2.25}, {"label":"R22", "x":13, "y":2.125}, {"label":"R23", "x":14, "y":2}, {"label":"R24", "x":15, "y":2.125}, {"label":"R25", "x":16, "y":2.375}, {"label":"R26", "x":17, "y":2.375}, {"label":"L30", "x":0, "y":3.375}, {"label":"L31", "x":1, "y":3.375}, {"label":"L32", "x":2, "y":3.125}, {"label":"L33", "x":3, "y":3}, {"label":"L34", "x":4, "y":3.125}, {"label":"L35", "x":5, "y":3.25}, {"label":"L36", "x":6.5, "y":4.25}, {"label":"R30", "x":10.5, "y":4.25}, {"label":"R31", "x":12, "y":3.25}, {"label":"R32", "x":13, "y":3.125}, {"label":"R33", "x":14, "y":3}, {"label":"R34", "x":15, "y":3.125}, {"label":"R35", "x":16, "y":3.375}, {"label":"R36", "x":17, "y":3.375}, {"label":"L40", "x":0, "y":4.375}, {"label":"L41", "x":1, "y":4.375}, {"label":"L42", "x":2, "y":4.125}, {"label":"L43", "x":3, "y":4}, {"label":"L44", "x":5.5, "y":5.25}, {"label":"L45", "x":6.5, "y":5.25}, {"label":"L46", "x":7.5, "y":4.25, "h":2}, {"label":"R40", "x":9.5, "y":4.25, "h":2}, {"label":"R41", "x":10.5, "y":5.25}, {"label":"R42", "x":11.5, "y":5.25}, {"label":"R43", "x":14, "y":4}, {"label":"R44", "x":15, "y":4.125}, {"label":"R45", "x":16, "y":4.375}, {"label":"R46", "x":17, "y":4.375}] |
||||
} |
||||
} |
||||
} |
||||
|
||||
@ -0,0 +1,3 @@ |
||||
BACKLIGHT_ENABLE = no
|
||||
RGBLIGHT_ENABLE = no
|
||||
AUDIO_ENABLE = no
|
||||
@ -1 +1,3 @@ |
||||
BACKLIGHT_ENABLE = no
|
||||
RGBLIGHT_ENABLE = no
|
||||
AUDIO_ENABLE = no
|
||||
|
||||
@ -1,89 +0,0 @@ |
||||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com> |
||||
Copyright 2015 Jack Humbert |
||||
|
||||
This program is free software: you can redistribute it and/or modify |
||||
it under the terms of the GNU General Public License as published by |
||||
the Free Software Foundation, either version 2 of the License, or |
||||
(at your option) any later version. |
||||
|
||||
This program is distributed in the hope that it will be useful, |
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
GNU General Public License for more details. |
||||
|
||||
You should have received a copy of the GNU General Public License |
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/ |
||||
|
||||
#ifndef REV2_CONFIG_H |
||||
#define REV2_CONFIG_H |
||||
|
||||
#include "config_common.h" |
||||
|
||||
/* USB Device descriptor parameter */ |
||||
#define VENDOR_ID 0xFEED |
||||
#define PRODUCT_ID 0x6060 |
||||
#define DEVICE_VER 0x0100 |
||||
#define MANUFACTURER Omkbd |
||||
#define PRODUCT ErgoDash |
||||
#define DESCRIPTION Power |
||||
|
||||
/* key matrix size */ |
||||
// Rows are doubled-up
|
||||
#define MATRIX_ROWS 10 |
||||
#define MATRIX_COLS 7 |
||||
|
||||
// wiring of each half
|
||||
#define MATRIX_ROW_PINS { D4, D7, E6, B4, B5 } |
||||
#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 } |
||||
// #define MATRIX_COL_PINS { B2, B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order
|
||||
|
||||
/* define tapping term */ |
||||
#define TAPPING_TERM 120 |
||||
|
||||
/* define if matrix has ghost */ |
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
#define C6_AUDIO |
||||
|
||||
/* number of backlight levels */ |
||||
#ifdef BACKLIGHT_ENABLE |
||||
#define BACKLIGHT_PIN B6 |
||||
#define BACKLIGHT_LEVELS 7 |
||||
// #define BACKLIGHT_BREATHING
|
||||
// #define BREATHING_PERIOD 4
|
||||
#endif |
||||
|
||||
/* Set 0 if debouncing isn't needed */ |
||||
#define DEBOUNCING_DELAY 5 |
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ |
||||
#define LOCKING_SUPPORT_ENABLE |
||||
/* Locking resynchronize hack */ |
||||
#define LOCKING_RESYNC_ENABLE |
||||
|
||||
/* ws2812 RGB LED */ |
||||
#define RGB_DI_PIN D3 |
||||
|
||||
#define RGBLED_NUM 24 // Number of LEDs
|
||||
|
||||
/*
|
||||
* Feature disable options |
||||
* These options are also useful to firmware size reduction. |
||||
*/ |
||||
|
||||
/* disable debug print */ |
||||
// #define NO_DEBUG
|
||||
|
||||
/* disable print */ |
||||
// #define NO_PRINT
|
||||
|
||||
/* disable action features */ |
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
#endif |
||||
@ -1,13 +0,0 @@ |
||||
{ |
||||
"keyboard_name": "ErgoDash rev2", |
||||
"url": "", |
||||
"maintainer": "qmk", |
||||
"width": 18, |
||||
"height": 6.25, |
||||
"layouts": { |
||||
"LAYOUT": { |
||||
"key_count": 70, |
||||
"layout": [{"label":"L00", "x":0, "y":0.375}, {"label":"L01", "x":1, "y":0.375}, {"label":"L02", "x":2, "y":0.125}, {"label":"L03", "x":3, "y":0}, {"label":"L04", "x":4, "y":0.125}, {"label":"L05", "x":5, "y":0.25}, {"label":"L06", "x":6, "y":0.75}, {"label":"R00", "x":11, "y":0.75}, {"label":"R01", "x":12, "y":0.25}, {"label":"R02", "x":13, "y":0.125}, {"label":"R03", "x":14, "y":0}, {"label":"R04", "x":15, "y":0.125}, {"label":"R05", "x":16, "y":0.375}, {"label":"R06", "x":17, "y":0.375}, {"label":"L10", "x":0, "y":1.375}, {"label":"L11", "x":1, "y":1.375}, {"label":"L12", "x":2, "y":1.125}, {"label":"L13", "x":3, "y":1}, {"label":"L14", "x":4, "y":1.125}, {"label":"L15", "x":5, "y":1.25}, {"label":"L16", "x":6, "y":1.75}, {"label":"R10", "x":11, "y":1.75}, {"label":"R11", "x":12, "y":1.25}, {"label":"R12", "x":13, "y":1.125}, {"label":"R13", "x":14, "y":1}, {"label":"R14", "x":15, "y":1.125}, {"label":"R15", "x":16, "y":1.375}, {"label":"R16", "x":17, "y":1.375}, {"label":"L20", "x":0, "y":2.375}, {"label":"L21", "x":1, "y":2.375}, {"label":"L22", "x":2, "y":2.125}, {"label":"L23", "x":3, "y":2}, {"label":"L24", "x":4, "y":2.125}, {"label":"L25", "x":5, "y":2.25}, {"label":"L26", "x":6, "y":2.75}, {"label":"R20", "x":11, "y":2.75}, {"label":"R21", "x":12, "y":2.25}, {"label":"R22", "x":13, "y":2.125}, {"label":"R23", "x":14, "y":2}, {"label":"R24", "x":15, "y":2.125}, {"label":"R25", "x":16, "y":2.375}, {"label":"R26", "x":17, "y":2.375}, {"label":"L30", "x":0, "y":3.375}, {"label":"L31", "x":1, "y":3.375}, {"label":"L32", "x":2, "y":3.125}, {"label":"L33", "x":3, "y":3}, {"label":"L34", "x":4, "y":3.125}, {"label":"L35", "x":5, "y":3.25}, {"label":"L36", "x":6.5, "y":4.25}, {"label":"R30", "x":10.5, "y":4.25}, {"label":"R31", "x":12, "y":3.25}, {"label":"R32", "x":13, "y":3.125}, {"label":"R33", "x":14, "y":3}, {"label":"R34", "x":15, "y":3.125}, {"label":"R35", "x":16, "y":3.375}, {"label":"R36", "x":17, "y":3.375}, {"label":"L40", "x":0, "y":4.375}, {"label":"L41", "x":1, "y":4.375}, {"label":"L42", "x":2, "y":4.125}, {"label":"L43", "x":3, "y":4}, {"label":"L44", "x":5.5, "y":5.25}, {"label":"L45", "x":6.5, "y":5.25}, {"label":"L46", "x":7.5, "y":4.25, "h":2}, {"label":"R40", "x":9.5, "y":4.25, "h":2}, {"label":"R41", "x":10.5, "y":5.25}, {"label":"R42", "x":11.5, "y":5.25}, {"label":"R43", "x":14, "y":4}, {"label":"R44", "x":15, "y":4.125}, {"label":"R45", "x":16, "y":4.375}, {"label":"R46", "x":17, "y":4.375}] |
||||
} |
||||
} |
||||
} |
||||
@ -1,42 +0,0 @@ |
||||
/*
|
||||
This is the c configuration file for the keymap |
||||
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com> |
||||
Copyright 2015 Jack Humbert |
||||
|
||||
This program is free software: you can redistribute it and/or modify |
||||
it under the terms of the GNU General Public License as published by |
||||
the Free Software Foundation, either version 2 of the License, or |
||||
(at your option) any later version. |
||||
|
||||
This program is distributed in the hope that it will be useful, |
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
GNU General Public License for more details. |
||||
|
||||
You should have received a copy of the GNU General Public License |
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/ |
||||
|
||||
#pragma once |
||||
|
||||
// place overrides here
|
||||
|
||||
/* Use I2C or Serial, not both */ |
||||
|
||||
#define USE_SERIAL |
||||
// #define USE_I2C
|
||||
|
||||
/* Select hand configuration */ |
||||
|
||||
#define MASTER_LEFT |
||||
// #define MASTER_RIGHT
|
||||
// #define EE_HANDS
|
||||
|
||||
|
||||
#undef RGBLED_NUM |
||||
#define RGBLIGHT_ANIMATIONS |
||||
#define RGBLED_NUM 24 |
||||
#define RGBLIGHT_HUE_STEP 10 |
||||
#define RGBLIGHT_SAT_STEP 17 |
||||
#define RGBLIGHT_VAL_STEP 17 |
||||
@ -1,154 +0,0 @@ |
||||
#include QMK_KEYBOARD_H |
||||
|
||||
extern keymap_config_t keymap_config; |
||||
|
||||
#define _QWERTY 0 |
||||
#define _LOWER 1 |
||||
#define _RAISE 2 |
||||
#define _ADJUST 16 |
||||
|
||||
enum custom_keycodes { |
||||
QWERTY = SAFE_RANGE, |
||||
LOWER, |
||||
RAISE, |
||||
ADJUST, |
||||
}; |
||||
|
||||
#define EISU LALT(KC_GRV) |
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { |
||||
|
||||
/* Qwerty
|
||||
* ,----------------------------------------------------------------------------------------------------------------------. |
||||
* | ESC | 1 | 2 | 3 | 4 | 5 | [ | | ] | 6 | 7 | 8 | 9 | 0 |Pscree| |
||||
* |------+------+------+------+------+------+------+--------------------+------+------+------+------+------+------+------| |
||||
* | ` | Q | W | E | R | T | - | | = | Y | U | I | O | P | \ | |
||||
* |------+------+------+------+------+------+------+--------------------+------+------+------+------+------+------+------| |
||||
* | Tab | A | S | D | F | G | Del | | Bksp | H | J | K | L | ; | " | |
||||
* |------+------+------+------+------+------+---------------------------+------+------+------+------+------+------+------| |
||||
* | Shift| Z | X | C | V | B | Space| | Enter| N | M | , | . | / | Shift| |
||||
* |-------------+------+------+------+------+------+------+------+------+------+------+------+------+------+-------------| |
||||
* | Ctrl | GUI | ALt | EISU |||||||| Lower| Space| |||||||| | Enter| Raise|||||||| Left | Down | Up | Right| |
||||
* ,----------------------------------------------------------------------------------------------------------------------. |
||||
*/ |
||||
[_QWERTY] = LAYOUT( \
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_LBRC, KC_RBRC, KC_6, KC_7, KC_8, KC_9, KC_0, KC_PSCR, \
|
||||
KC_GRV, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_MINS, KC_EQL , KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, \
|
||||
KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_DEL , KC_BSPC, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_SPC , KC_ENT , KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \
|
||||
KC_LCTL, KC_LGUI, KC_LALT, EISU, LOWER, KC_SPC ,KC_SPC, KC_SPC,KC_ENT , RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
|
||||
), |
||||
|
||||
/* Lower
|
||||
* ,----------------------------------------------------------------------------------------------------------------------. |
||||
* | F11 | F1 | F2 | F3 | F4 | F5 | { | | } | F6 | F7 | F8 | F9 | F10 | F12 | |
||||
* |------+------+------+------+------+------+------+--------------------+------+------+------+------+------+------+------| |
||||
* | ~ | ! | @ | # | $ | % | _ | | + | ^ | & | * | ( | ) | | | |
||||
* |------+------+------+------+------+------+------+--------------------+------+------+------+------+------+------+------| |
||||
* | Tab | 1 | 2 | 3 | 4 | 5 | Del | | Bksp | H | J | K | L | : | " | |
||||
* |------+------+------+------+------+------+---------------------------+------+------+------+------+------+------+------| |
||||
* | Shift| 6 | 7 | 8 | 9 | 0 | Space| | Enter| N | M | < | > | ? | Shift| |
||||
* |-------------+------+------+------+------+------+------+------+------+------+------+------+------+------+-------------| |
||||
* | Ctrl | GUI | ALt | EISU |||||||| Lower| Space| |||||||| | Enter| Raise|||||||| Home |PageDn|PageUp| End | |
||||
* ,----------------------------------------------------------------------------------------------------------------------. |
||||
*/ |
||||
[_LOWER] = LAYOUT( |
||||
KC_F11, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_LCBR, KC_RCBR, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F12, \
|
||||
KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_UNDS, KC_PLUS, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_PIPE, \
|
||||
KC_TAB, KC_1, KC_2, KC_3, KC_4, KC_5, KC_DEL , KC_BSPC, KC_H, KC_J, KC_K, KC_L, KC_COLN, KC_DQT , \
|
||||
KC_LSFT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_SPC , KC_ENT , KC_N, KC_M, KC_LT, KC_GT, KC_QUES, KC_RSFT, \
|
||||
KC_LCTL, KC_LGUI, KC_LALT, EISU, LOWER, KC_SPC ,KC_SPC, KC_SPC,KC_ENT , RAISE, KC_HOME, KC_PGDN, KC_PGUP, KC_END \
|
||||
), |
||||
|
||||
/* Raise
|
||||
* ,----------------------------------------------------------------------------------------------------------------------. |
||||
* | F11 | F1 | F2 | F3 | F4 | F5 | { | | } | F6 | F7 | F8 | F9 | F10 | F12 | |
||||
* |------+------+------+------+------+------+------+--------------------+------+------+------+------+------+------+------| |
||||
* | ~ | ! | @ | # | $ | % | _ | | + | ^ | & | * | ( | ) | | | |
||||
* |------+------+------+------+------+------+------+--------------------+------+------+------+------+------+------+------| |
||||
* | Tab | 1 | 2 | 3 | 4 | 5 | Del | | Bksp | H | J | K | L | : | " | |
||||
* |------+------+------+------+------+------+---------------------------+------+------+------+------+------+------+------| |
||||
* | Shift| 6 | 7 | 8 | 9 | 0 | Space| | Enter| N | M | < | > | ? | Shift| |
||||
* |-------------+------+------+------+------+------+------+------+------+------+------+------+------+------+-------------| |
||||
* | Ctrl | GUI | ALt | EISU |||||||| Lower| Space| |||||||| | Enter| Raise|||||||| Home |PageDn|PageUp| End | |
||||
* ,----------------------------------------------------------------------------------------------------------------------. |
||||
*/ |
||||
[_RAISE] = LAYOUT( |
||||
KC_F11, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_LCBR, KC_RCBR, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F12, \
|
||||
KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_UNDS, KC_PLUS, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_PIPE, \
|
||||
KC_TAB, KC_1, KC_2, KC_3, KC_4, KC_5, KC_DEL , KC_BSPC, KC_H, KC_J, KC_K, KC_L, KC_COLN, KC_DQT , \
|
||||
KC_LSFT, KC_6, KC_7, KC_8, KC_9, KC_0, KC_SPC , KC_ENT , KC_N, KC_M, KC_LT, KC_GT, KC_QUES, KC_RSFT, \
|
||||
KC_LCTL, KC_LGUI, KC_LALT, EISU, LOWER, KC_SPC ,KC_SPC, KC_SPC,KC_ENT , RAISE, KC_HOME, KC_PGDN, KC_PGUP, KC_END \
|
||||
), |
||||
|
||||
/* Adjust
|
||||
* ,----------------------------------------------------------------------------------------------------------------------. |
||||
* | | | | | | | | | | | | | | | | |
||||
* |------+------+------+------+------+------+---------------------------+------+------+------+------+------+------+------| |
||||
* | | Reset|RGB ON| MODE| HUE-| HUE+| | | | SAT-| SAT+| VAL-| VAL+| | | |
||||
* |------+------+------+------+------+------+---------------------------+------+------+------+------+------+------+------| |
||||
* | | | | | | | | | | | | | | | | |
||||
* |------+------+------+------+------+------+---------------------------+------+------+------+------+------+------+------| |
||||
* | | | | | | | | | | | | | | | | |
||||
* |-------------+------+------+------+------+------+------+------+------+------+------+------+------+------+-------------| |
||||
* | | | | |||||||| | | |||||||| | | |||||||| | | | | |
||||
* ,----------------------------------------------------------------------------------------------------------------------. |
||||
*/ |
||||
[_ADJUST] = LAYOUT( |
||||
_______, _______, _______, _______, _______, _______,_______, _______, _______, _______, _______, _______, _______, _______, \
|
||||
_______, RESET , RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI,_______, _______, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, _______, _______, \
|
||||
_______, _______, BL_TOGG, BL_BRTG, BL_INC , BL_DEC ,_______, _______, _______, _______, _______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, _______, _______,_______, _______, _______, _______, _______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, _______,_______,_______, _______,_______, _______, _______, _______, _______, _______ \
|
||||
) |
||||
}; |
||||
|
||||
#ifdef AUDIO_ENABLE |
||||
float tone_qwerty[][2] = SONG(QWERTY_SOUND); |
||||
#endif |
||||
|
||||
void persistent_default_layer_set(uint16_t default_layer) { |
||||
eeconfig_update_default_layer(default_layer); |
||||
default_layer_set(default_layer); |
||||
} |
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { |
||||
switch (keycode) { |
||||
case QWERTY: |
||||
if (record->event.pressed) { |
||||
print("mode just switched to qwerty and this is a huge string\n"); |
||||
set_single_persistent_default_layer(_QWERTY); |
||||
} |
||||
return false; |
||||
break; |
||||
case LOWER: |
||||
if (record->event.pressed) { |
||||
layer_on(_LOWER); |
||||
update_tri_layer(_LOWER, _RAISE, _ADJUST); |
||||
} else { |
||||
layer_off(_LOWER); |
||||
update_tri_layer(_LOWER, _RAISE, _ADJUST); |
||||
} |
||||
return false; |
||||
break; |
||||
case RAISE: |
||||
if (record->event.pressed) { |
||||
layer_on(_RAISE); |
||||
update_tri_layer(_LOWER, _RAISE, _ADJUST); |
||||
} else { |
||||
layer_off(_RAISE); |
||||
update_tri_layer(_LOWER, _RAISE, _ADJUST); |
||||
} |
||||
return false; |
||||
break; |
||||
case ADJUST: |
||||
if (record->event.pressed) { |
||||
layer_on(_ADJUST); |
||||
} else { |
||||
layer_off(_ADJUST); |
||||
} |
||||
return false; |
||||
break; |
||||
} |
||||
return true; |
||||
} |
||||
@ -1,39 +0,0 @@ |
||||
#include "ergodash.h" |
||||
|
||||
#ifdef AUDIO_ENABLE |
||||
float tone_startup[][2] = SONG(STARTUP_SOUND); |
||||
float tone_goodbye[][2] = SONG(GOODBYE_SOUND); |
||||
#endif |
||||
|
||||
#ifdef SSD1306OLED |
||||
void led_set_kb(uint8_t usb_led) { |
||||
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
|
||||
led_set_user(usb_led); |
||||
} |
||||
#endif |
||||
|
||||
void matrix_init_kb(void) { |
||||
|
||||
#ifdef AUDIO_ENABLE |
||||
_delay_ms(20); // gets rid of tick
|
||||
PLAY_SONG(tone_startup); |
||||
#endif |
||||
|
||||
// // green led on
|
||||
// DDRD |= (1<<5);
|
||||
// PORTD &= ~(1<<5);
|
||||
|
||||
// // orange led on
|
||||
// DDRB |= (1<<0);
|
||||
// PORTB &= ~(1<<0);
|
||||
|
||||
matrix_init_user(); |
||||
}; |
||||
|
||||
void shutdown_user(void) { |
||||
#ifdef AUDIO_ENABLE |
||||
PLAY_SONG(tone_goodbye); |
||||
_delay_ms(150); |
||||
stop_all_notes(); |
||||
#endif |
||||
} |
||||
@ -1,66 +0,0 @@ |
||||
#ifndef REV1_H |
||||
#define REV1_H |
||||
|
||||
#include "ergodash.h" |
||||
|
||||
//void promicro_bootloader_jmp(bool program);
|
||||
#include "quantum.h" |
||||
|
||||
|
||||
#ifdef USE_I2C |
||||
#include <stddef.h> |
||||
#ifdef __AVR__ |
||||
#include <avr/io.h> |
||||
#include <avr/interrupt.h> |
||||
#endif |
||||
#endif |
||||
|
||||
//void promicro_bootloader_jmp(bool program);
|
||||
|
||||
#ifndef FLIP_HALF |
||||
// Standard Keymap
|
||||
// (TRRS jack on the left half is to the right, TRRS jack on the right half is to the left)
|
||||
#define LAYOUT( \ |
||||
L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \
|
||||
L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \
|
||||
L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \
|
||||
L30, L31, L32, L33, L34, L35, L36, R30, R31, R32, R33, R34, R35, R36, \
|
||||
L40, L41, L42, L43, L44, L45, L46, R40, R41, R42, R43, R44, R45, R46 \
|
||||
) \
|
||||
{ \
|
||||
{ L00, L01, L02, L03, L04, L05, L06 }, \
|
||||
{ L10, L11, L12, L13, L14, L15, L16 }, \
|
||||
{ L20, L21, L22, L23, L24, L25, L26 }, \
|
||||
{ L30, L31, L32, L33, L34, L35, L36 }, \
|
||||
{ L40, L41, L42, L43, L44, L45, L46 }, \
|
||||
{ R06, R05, R04, R03, R02, R01, R00 }, \
|
||||
{ R16, R15, R14, R13, R12, R11, R10 }, \
|
||||
{ R26, R25, R24, R23, R22, R21, R20 }, \
|
||||
{ R36, R35, R34, R33, R32, R31, R30 }, \
|
||||
{ R46, R45, R44, R43, R42, R41, R40 } \
|
||||
} |
||||
#else |
||||
// Keymap with right side flipped
|
||||
// (TRRS jack on both halves are to the right)
|
||||
#define LAYOUT( \ |
||||
L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \
|
||||
L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \
|
||||
L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \
|
||||
L30, L31, L32, L33, L34, L35, L36, R30, R31, R32, R33, R34, R35, R36, \
|
||||
L40, L41, L42, L43, L44, L45, L46, R40, R41, R42, R43, R44, R45, R46 \
|
||||
) \
|
||||
{ \
|
||||
{ L00, L01, L02, L03, L04, L05, L06 }, \
|
||||
{ L10, L11, L12, L13, L14, L15, L16 }, \
|
||||
{ L20, L21, L22, L23, L24, L25, L26 }, \
|
||||
{ L30, L31, L32, L33, L34, L35, L36 }, \
|
||||
{ L40, L41, L42, L43, L44, L45, L46 }, \
|
||||
{ R00, R01, R02, R03, R04, R05, R06 }, \
|
||||
{ R10, R11, R12, R13, R14, R15, R16 }, \
|
||||
{ R20, R21, R22, R23, R24, R25, R26 }, \
|
||||
{ R30, R31, R32, R33, R34, R35, R36 }, \
|
||||
{ R40, R41, R42, R43, R44, R45, R46 } \
|
||||
} |
||||
#endif |
||||
|
||||
#endif |
||||
@ -1,2 +0,0 @@ |
||||
BACKLIGHT_ENABLE = no
|
||||
RGBLIGHT_ENABLE = no
|
||||
@ -1,228 +0,0 @@ |
||||
/*
|
||||
* WARNING: be careful changing this code, it is very timing dependent |
||||
*/ |
||||
|
||||
#ifndef F_CPU |
||||
#define F_CPU 16000000 |
||||
#endif |
||||
|
||||
#include <avr/io.h> |
||||
#include <avr/interrupt.h> |
||||
#include <util/delay.h> |
||||
#include <stdbool.h> |
||||
#include "serial.h" |
||||
|
||||
#ifndef USE_I2C |
||||
|
||||
// Serial pulse period in microseconds. Its probably a bad idea to lower this
|
||||
// value.
|
||||
#define SERIAL_DELAY 24 |
||||
|
||||
uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; |
||||
uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; |
||||
|
||||
#define SLAVE_DATA_CORRUPT (1<<0) |
||||
volatile uint8_t status = 0; |
||||
|
||||
inline static |
||||
void serial_delay(void) { |
||||
_delay_us(SERIAL_DELAY); |
||||
} |
||||
|
||||
inline static |
||||
void serial_output(void) { |
||||
SERIAL_PIN_DDR |= SERIAL_PIN_MASK; |
||||
} |
||||
|
||||
// make the serial pin an input with pull-up resistor
|
||||
inline static |
||||
void serial_input(void) { |
||||
SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK; |
||||
SERIAL_PIN_PORT |= SERIAL_PIN_MASK; |
||||
} |
||||
|
||||
inline static |
||||
uint8_t serial_read_pin(void) { |
||||
return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK); |
||||
} |
||||
|
||||
inline static |
||||
void serial_low(void) { |
||||
SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK; |
||||
} |
||||
|
||||
inline static |
||||
void serial_high(void) { |
||||
SERIAL_PIN_PORT |= SERIAL_PIN_MASK; |
||||
} |
||||
|
||||
void serial_master_init(void) { |
||||
serial_output(); |
||||
serial_high(); |
||||
} |
||||
|
||||
void serial_slave_init(void) { |
||||
serial_input(); |
||||
|
||||
// Enable INT0
|
||||
EIMSK |= _BV(INT0); |
||||
// Trigger on falling edge of INT0
|
||||
EICRA &= ~(_BV(ISC00) | _BV(ISC01)); |
||||
} |
||||
|
||||
// Used by the master to synchronize timing with the slave.
|
||||
static |
||||
void sync_recv(void) { |
||||
serial_input(); |
||||
// This shouldn't hang if the slave disconnects because the
|
||||
// serial line will float to high if the slave does disconnect.
|
||||
while (!serial_read_pin()); |
||||
serial_delay(); |
||||
} |
||||
|
||||
// Used by the slave to send a synchronization signal to the master.
|
||||
static |
||||
void sync_send(void) { |
||||
serial_output(); |
||||
|
||||
serial_low(); |
||||
serial_delay(); |
||||
|
||||
serial_high(); |
||||
} |
||||
|
||||
// Reads a byte from the serial line
|
||||
static |
||||
uint8_t serial_read_byte(void) { |
||||
uint8_t byte = 0; |
||||
serial_input(); |
||||
for ( uint8_t i = 0; i < 8; ++i) { |
||||
byte = (byte << 1) | serial_read_pin(); |
||||
serial_delay(); |
||||
_delay_us(1); |
||||
} |
||||
|
||||
return byte; |
||||
} |
||||
|
||||
// Sends a byte with MSB ordering
|
||||
static |
||||
void serial_write_byte(uint8_t data) { |
||||
uint8_t b = 8; |
||||
serial_output(); |
||||
while( b-- ) { |
||||
if(data & (1 << b)) { |
||||
serial_high(); |
||||
} else { |
||||
serial_low(); |
||||
} |
||||
serial_delay(); |
||||
} |
||||
} |
||||
|
||||
// interrupt handle to be used by the slave device
|
||||
ISR(SERIAL_PIN_INTERRUPT) { |
||||
sync_send(); |
||||
|
||||
uint8_t checksum = 0; |
||||
for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { |
||||
serial_write_byte(serial_slave_buffer[i]); |
||||
sync_send(); |
||||
checksum += serial_slave_buffer[i]; |
||||
} |
||||
serial_write_byte(checksum); |
||||
sync_send(); |
||||
|
||||
// wait for the sync to finish sending
|
||||
serial_delay(); |
||||
|
||||
// read the middle of pulses
|
||||
_delay_us(SERIAL_DELAY/2); |
||||
|
||||
uint8_t checksum_computed = 0; |
||||
for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { |
||||
serial_master_buffer[i] = serial_read_byte(); |
||||
sync_send(); |
||||
checksum_computed += serial_master_buffer[i]; |
||||
} |
||||
uint8_t checksum_received = serial_read_byte(); |
||||
sync_send(); |
||||
|
||||
serial_input(); // end transaction
|
||||
|
||||
if ( checksum_computed != checksum_received ) { |
||||
status |= SLAVE_DATA_CORRUPT; |
||||
} else { |
||||
status &= ~SLAVE_DATA_CORRUPT; |
||||
} |
||||
} |
||||
|
||||
inline |
||||
bool serial_slave_DATA_CORRUPT(void) { |
||||
return status & SLAVE_DATA_CORRUPT; |
||||
} |
||||
|
||||
// Copies the serial_slave_buffer to the master and sends the
|
||||
// serial_master_buffer to the slave.
|
||||
//
|
||||
// Returns:
|
||||
// 0 => no error
|
||||
// 1 => slave did not respond
|
||||
int serial_update_buffers(void) { |
||||
// this code is very time dependent, so we need to disable interrupts
|
||||
cli(); |
||||
|
||||
// signal to the slave that we want to start a transaction
|
||||
serial_output(); |
||||
serial_low(); |
||||
_delay_us(1); |
||||
|
||||
// wait for the slaves response
|
||||
serial_input(); |
||||
serial_high(); |
||||
_delay_us(SERIAL_DELAY); |
||||
|
||||
// check if the slave is present
|
||||
if (serial_read_pin()) { |
||||
// slave failed to pull the line low, assume not present
|
||||
sei(); |
||||
return 1; |
||||
} |
||||
|
||||
// if the slave is present syncronize with it
|
||||
sync_recv(); |
||||
|
||||
uint8_t checksum_computed = 0; |
||||
// receive data from the slave
|
||||
for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { |
||||
serial_slave_buffer[i] = serial_read_byte(); |
||||
sync_recv(); |
||||
checksum_computed += serial_slave_buffer[i]; |
||||
} |
||||
uint8_t checksum_received = serial_read_byte(); |
||||
sync_recv(); |
||||
|
||||
if (checksum_computed != checksum_received) { |
||||
sei(); |
||||
return 1; |
||||
} |
||||
|
||||
uint8_t checksum = 0; |
||||
// send data to the slave
|
||||
for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { |
||||
serial_write_byte(serial_master_buffer[i]); |
||||
sync_recv(); |
||||
checksum += serial_master_buffer[i]; |
||||
} |
||||
serial_write_byte(checksum); |
||||
sync_recv(); |
||||
|
||||
// always, release the line when not in use
|
||||
serial_output(); |
||||
serial_high(); |
||||
|
||||
sei(); |
||||
return 0; |
||||
} |
||||
|
||||
#endif |
||||
@ -1,26 +0,0 @@ |
||||
#ifndef MY_SERIAL_H |
||||
#define MY_SERIAL_H |
||||
|
||||
#include "config.h" |
||||
#include <stdbool.h> |
||||
|
||||
/* TODO: some defines for interrupt setup */ |
||||
#define SERIAL_PIN_DDR DDRD |
||||
#define SERIAL_PIN_PORT PORTD |
||||
#define SERIAL_PIN_INPUT PIND |
||||
#define SERIAL_PIN_MASK _BV(PD0) |
||||
#define SERIAL_PIN_INTERRUPT INT0_vect |
||||
|
||||
#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 |
||||
#define SERIAL_MASTER_BUFFER_LENGTH 1 |
||||
|
||||
// Buffers for master - slave communication
|
||||
extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; |
||||
extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; |
||||
|
||||
void serial_master_init(void); |
||||
void serial_slave_init(void); |
||||
int serial_update_buffers(void); |
||||
bool serial_slave_data_corrupt(void); |
||||
|
||||
#endif |
||||
@ -1,86 +0,0 @@ |
||||
#include <avr/io.h> |
||||
#include <avr/wdt.h> |
||||
#include <avr/power.h> |
||||
#include <avr/interrupt.h> |
||||
#include <util/delay.h> |
||||
#include <avr/eeprom.h> |
||||
#include "split_util.h" |
||||
#include "matrix.h" |
||||
#include "keyboard.h" |
||||
#include "config.h" |
||||
#include "timer.h" |
||||
|
||||
#ifdef USE_I2C |
||||
# include "i2c.h" |
||||
#else |
||||
# include "serial.h" |
||||
#endif |
||||
|
||||
volatile bool isLeftHand = true; |
||||
|
||||
static void setup_handedness(void) { |
||||
#ifdef EE_HANDS |
||||
isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS); |
||||
#else |
||||
// I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c
|
||||
#if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT) |
||||
isLeftHand = !has_usb(); |
||||
#else |
||||
isLeftHand = has_usb(); |
||||
#endif |
||||
#endif |
||||
} |
||||
|
||||
static void keyboard_master_setup(void) { |
||||
#ifdef USE_I2C |
||||
i2c_master_init(); |
||||
#ifdef SSD1306OLED |
||||
matrix_master_OLED_init (); |
||||
#endif |
||||
#else |
||||
serial_master_init(); |
||||
#endif |
||||
} |
||||
|
||||
static void keyboard_slave_setup(void) { |
||||
timer_init(); |
||||
#ifdef USE_I2C |
||||
i2c_slave_init(SLAVE_I2C_ADDRESS); |
||||
#else |
||||
serial_slave_init(); |
||||
#endif |
||||
} |
||||
|
||||
bool has_usb(void) { |
||||
USBCON |= (1 << OTGPADE); //enables VBUS pad
|
||||
_delay_us(5); |
||||
return (USBSTA & (1<<VBUS)); //checks state of VBUS
|
||||
} |
||||
|
||||
void split_keyboard_setup(void) { |
||||
setup_handedness(); |
||||
|
||||
if (has_usb()) { |
||||
keyboard_master_setup(); |
||||
} else { |
||||
keyboard_slave_setup(); |
||||
} |
||||
sei(); |
||||
} |
||||
|
||||
void keyboard_slave_loop(void) { |
||||
matrix_init(); |
||||
|
||||
while (1) { |
||||
matrix_slave_scan(); |
||||
} |
||||
} |
||||
|
||||
// this code runs before the usb and keyboard is initialized
|
||||
void matrix_setup(void) { |
||||
split_keyboard_setup(); |
||||
|
||||
if (!has_usb()) { |
||||
keyboard_slave_loop(); |
||||
} |
||||
} |
||||
@ -1,20 +0,0 @@ |
||||
#ifndef SPLIT_KEYBOARD_UTIL_H |
||||
#define SPLIT_KEYBOARD_UTIL_H |
||||
|
||||
#include <stdbool.h> |
||||
#include "eeconfig.h" |
||||
|
||||
#define SLAVE_I2C_ADDRESS 0x32 |
||||
|
||||
extern volatile bool isLeftHand; |
||||
|
||||
// slave version of matix scan, defined in matrix.c
|
||||
void matrix_slave_scan(void); |
||||
|
||||
void split_keyboard_setup(void); |
||||
bool has_usb(void); |
||||
void keyboard_slave_loop(void); |
||||
|
||||
void matrix_master_OLED_init (void); |
||||
|
||||
#endif |
||||
Loading…
Reference in new issue