skullydazed
8 years ago
committed by
GitHub
commit
ecd3dbf085
@ -1,8 +1,8 @@ |
||||
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control
|
||||
CONSOLE_ENABLE ?= yes # Console for debug
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover
|
||||
CUSTOM_MATRIX ?= yes # Custom matrix file
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = yes # Console for debug
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover
|
||||
CUSTOM_MATRIX = yes # Custom matrix file
|
||||
@ -1,97 +1,17 @@ |
||||
Clueboard keyboard firmware |
||||
====================== |
||||
# Clueboard 66% |
||||
|
||||
DIY/Assembled compact 66% keyboard by [Clueboard](http://clueboard.co). |
||||
 |
||||
|
||||
For the full Quantum Mechanical Keyboard feature list, see [the parent readme.md](/readme.md). |
||||
A fully customizable 66% keyboard. |
||||
|
||||
## First Time Setup |
||||
* Keyboard Maintainer: [Zach White](https://github.com/skullydazed) |
||||
* Hardware Supported: Clueboard 66% PCB |
||||
* rev1 (1.0) |
||||
* rev2 (2.0, 2.0.1, 2.1, 2.5, 2.5.1, 2.6) |
||||
* Hardware Availability: [clueboard.co](https://clueboard.co/) |
||||
|
||||
Download or clone the whole firmware and navigate to the keyboards/clueboard directory. Once your dev env is setup, you'll be able to generate the default .hex: |
||||
Make example for this keyboard (after setting up your build environment): |
||||
|
||||
``` |
||||
$ make |
||||
``` |
||||
make cluepad-default |
||||
|
||||
You will see a lot of output and if everything worked correctly you will see something similar to this: |
||||
|
||||
``` |
||||
Size after: |
||||
text data bss dec hex filename |
||||
0 19992 0 19992 4e18 clueboard_rev2_default.hex |
||||
``` |
||||
|
||||
At this point you can press RESET on your Clueboard and flash your keyboard with this command: |
||||
|
||||
``` |
||||
$ make dfu |
||||
``` |
||||
|
||||
If you would like to use one of the alternative keymaps, or create your own, see below. |
||||
|
||||
## Clueboard 1.0 |
||||
|
||||
If you have a first generation Clueboard (one with a black PCB) you will need to use the revision 1 code. To do so add `rev1` to your make command, like this: |
||||
|
||||
``` |
||||
$ make rev1 |
||||
``` |
||||
|
||||
And when flashing your keyboard: |
||||
|
||||
``` |
||||
$ make rev1-dfu |
||||
``` |
||||
|
||||
If you are flashing an alternative layout to your rev1, include both `rev1` and `<keymap>` in your command, for example when flashing max: |
||||
|
||||
``` |
||||
$ make rev1-max-dfu |
||||
``` |
||||
|
||||
## Alternate Keymaps |
||||
|
||||
There are many alternative and user-contributed layouts available in the [keymaps/](keymaps/) directory. To compile and flash an alternative you will want to add `<keymap>` to your command: |
||||
|
||||
``` |
||||
$ make skully |
||||
``` |
||||
|
||||
And when flashing your keyboard, put `<keymap>` between "make" and "dfu": |
||||
|
||||
``` |
||||
$ make skully-dfu |
||||
``` |
||||
|
||||
### Notable Layouts |
||||
|
||||
These layouts are notable for one reason or another. If you are looking for ideas or inspiration you should look at these first: |
||||
|
||||
* [keymaps/default](keymaps/default) - The default Clueboard layout |
||||
* [keymaps/max](keymaps/max) - A maximised layout that makes use of every key and feature of the Clueboard 2.0 PCB. |
||||
* [keymaps/skully](keymaps/skully) - The layout that @skullydazed uses on his own Clueboards. |
||||
|
||||
## Create Your Own Keymap |
||||
|
||||
There are a lot of possibilities when creating your own keymap, and the primary documentation for doing that is [Customizing Your Keymap](/readme.md##customizing-your-keymap) in the main readme.md. As a way to get started, here is the procedure I recommend: |
||||
|
||||
* Copy `[keymaps/default](keymaps/default/)` to `keymaps/<your_layout>`. |
||||
* Compile the firmware (`$ make <your_layout>`) |
||||
* Flash the firmware (`$ make <your_layout>-dfu`) |
||||
* Make sure everything works like the default keyboard |
||||
* Modify `keymaps/<your_layout>/readme.md` to tell others about your layout. |
||||
* Modify `keymaps/<your_layout>/keymap.c` to reflect your desired layout. |
||||
* Compile your new custom firmware (`$ make <your_layout>`) |
||||
** If you have warnings you may flash without fixing them, but something may not work right. |
||||
** If you have any errors you must fix them before continuing. |
||||
* Flash the firmware (`$ make <your_layout>-dfu`) |
||||
|
||||
## Share Your Keymap |
||||
|
||||
Got your layout dialed in? Please share it with the world so we can benefit from your work! Simply submit a pull request with your layout and we'll include it in the official repository. Please use the following guidelines when putting together your pull request: |
||||
|
||||
* Include a readme.md that states what your primary keyboard use is, how your layout differs from the default, and highlights anything you think makes your layout particularly great. |
||||
* If your layout requires certain features (EG, RGB underlight or backlighting) ensure you have a Makefile and config.h that reflects that |
||||
* If your layout requires special hardware to be added, please describe that in the readme.md |
||||
|
||||
TODO: Write up or link quick how-to on creating and submitting a PR. (Pull requests accepted. :) |
||||
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. |
||||
|
||||
@ -1,28 +1,13 @@ |
||||
cluecard keyboard firmware |
||||
====================== |
||||
# Cluecard |
||||
|
||||
## Quantum MK Firmware |
||||
A simple QMK dev kit. |
||||
|
||||
For the full Quantum feature list, see [the parent readme.md](/doc/readme.md). |
||||
* Keyboard Maintainer: [Zach White](https://github.com/skullydazed) |
||||
* Hardware Supported: Cluecard 1.0 |
||||
* Hardware Availability: Special gift from [skullydazed](https://github.com/skullydazed) |
||||
|
||||
## Building |
||||
Make example for this keyboard (after setting up your build environment): |
||||
|
||||
Download or clone the whole firmware and navigate to the keyboards/cluecard folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. |
||||
make cluecard-default |
||||
|
||||
Depending on which keymap you would like to use, you will have to compile slightly differently. |
||||
|
||||
### Default |
||||
|
||||
To build with the default keymap, simply run `make default`. |
||||
|
||||
### Other Keymaps |
||||
|
||||
Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. |
||||
|
||||
To build the firmware binary hex file with a keymap just do `make` with a keymap like this: |
||||
|
||||
``` |
||||
$ make [default|jack|<name>] |
||||
``` |
||||
|
||||
Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/` |
||||
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. |
||||
|
||||
@ -1,4 +1,15 @@ |
||||
Cluepad number pad firmware |
||||
====================== |
||||
# Cluepad |
||||
|
||||
TODO: to be updated. |
||||
 |
||||
|
||||
A basic 17 key numpad PCB. |
||||
|
||||
* Keyboard Maintainer: [Zach White](https://github.com/skullydazed) |
||||
* Hardware Supported: Cluepad PCB 1.0 |
||||
* Hardware Availability: [clueboard.co](https://clueboard.co/) |
||||
|
||||
Make example for this keyboard (after setting up your build environment): |
||||
|
||||
make cluepad-default |
||||
|
||||
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. |
||||
|
||||
@ -1,8 +1,17 @@ |
||||
DK60 keyboard firmware |
||||
====================== |
||||
DK60 |
||||
=== |
||||
|
||||
Another 60% keyboard with different HHKB layout |
||||
 |
||||
|
||||
More information here: https://github.com/Dbroqua/DK60 |
||||
Another 60% keyboard with different HHKB layout made and sold by dbroqua. [More info on github/dbroqua](https://github.com/Dbroqua/DK60/) |
||||
|
||||
* Keyboard Maintainer: [Damien Broqua aka DarKou](https://github.com/Dbroqua) |
||||
* Hardware Supported: DK60 PCB revA |
||||
|
||||
Make example for this keyboard (after setting up your build environment): |
||||
|
||||
make dk60-default |
||||
|
||||
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. |
||||
|
||||
Open Hardware project! |
||||
|
||||
@ -0,0 +1,5 @@ |
||||
SUBPROJECT_DEFAULT = rev1
|
||||
|
||||
ifndef MAKEFILE_INCLUDED |
||||
include ../../Makefile
|
||||
endif |
||||
@ -0,0 +1,77 @@ |
||||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com> |
||||
|
||||
This program is free software: you can redistribute it and/or modify |
||||
it under the terms of the GNU General Public License as published by |
||||
the Free Software Foundation, either version 2 of the License, or |
||||
(at your option) any later version. |
||||
|
||||
This program is distributed in the hope that it will be useful, |
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
GNU General Public License for more details. |
||||
|
||||
You should have received a copy of the GNU General Public License |
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/ |
||||
|
||||
#ifndef CONFIG_H |
||||
#define CONFIG_H |
||||
|
||||
#include "config_common.h" |
||||
|
||||
/* USB Device descriptor parameter */ |
||||
#define VENDOR_ID 0x1337 |
||||
#define PRODUCT_ID 0x6006 |
||||
#define MANUFACTURER Bishop Keyboards |
||||
#define PRODUCT The ECO Keyboard |
||||
#define DESCRIPTION An economical ortholinear keyboard |
||||
|
||||
/* key matrix size */ |
||||
#define MATRIX_ROWS 4 |
||||
#define MATRIX_COLS 14 |
||||
|
||||
#define CATERINA_BOOTLOADER |
||||
|
||||
/* COL2ROW or ROW2COL */ |
||||
#define DIODE_DIRECTION COL2ROW |
||||
|
||||
/* define if matrix has ghost */ |
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* Set 0 if debouncing isn't needed */ |
||||
#define DEBOUNCING_DELAY 5 |
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ |
||||
#define LOCKING_SUPPORT_ENABLE |
||||
/* Locking resynchronize hack */ |
||||
#define LOCKING_RESYNC_ENABLE |
||||
|
||||
/* key combination for command */ |
||||
#define IS_COMMAND() ( \ |
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
) |
||||
|
||||
/*
|
||||
* Feature disable options |
||||
* These options are also useful to firmware size reduction. |
||||
*/ |
||||
|
||||
/* disable debug print */ |
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */ |
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */ |
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
#ifdef SUBPROJECT_rev1 |
||||
#include "rev1/config.h" |
||||
#endif |
||||
|
||||
#endif |
||||
@ -0,0 +1 @@ |
||||
#include "eco.h" |
||||
@ -0,0 +1,10 @@ |
||||
#ifndef ECO_H |
||||
#define ECO_H |
||||
|
||||
#ifdef SUBPROJECT_rev1 |
||||
#include "rev1.h" |
||||
#endif |
||||
|
||||
#include "quantum.h" |
||||
|
||||
#endif |
||||
@ -0,0 +1,25 @@ |
||||
|
||||
|
||||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
|
||||
ifndef QUANTUM_DIR |
||||
include ../../../../Makefile
|
||||
endif |
||||
@ -0,0 +1,217 @@ |
||||
// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
|
||||
// this is the style you want to emulate.
|
||||
|
||||
// Below layout is based upon /u/That-Canadian's planck layout
|
||||
|
||||
#include "eco.h" |
||||
#include "action_layer.h" |
||||
#ifdef AUDIO_ENABLE |
||||
#include "audio.h" |
||||
#endif |
||||
#include "eeconfig.h" |
||||
|
||||
extern keymap_config_t keymap_config; |
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
#define _QWERTY 0 |
||||
#define _LOWER 2 |
||||
#define _RAISE 3 |
||||
|
||||
#define _FUNCTION 15 |
||||
#define _ADJUST 16 |
||||
|
||||
enum eco_keycodes { |
||||
QWERTY = SAFE_RANGE, |
||||
LOWER, |
||||
RAISE |
||||
}; |
||||
|
||||
// Fillers to make layering more clear
|
||||
#define _______ KC_TRNS |
||||
#define XXXXXXX KC_NO |
||||
|
||||
// Defines for task manager and such
|
||||
#define CALTDEL LCTL(LALT(KC_DEL)) |
||||
#define TSKMGR LCTL(LSFT(KC_ESC)) |
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { |
||||
|
||||
/* Qwerty
|
||||
* ,-------------------------------------------------------------------------------------------------. |
||||
* | Tab | Q | W | E | R | T | ( | ) | Y | U | I | O | P | Bksp | |
||||
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------| |
||||
* | Func | A | S | D | F | G | [ | ] | H | J | K | L | ; | Enter| |
||||
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------| |
||||
* | Shift| Z | X | C | V | B | { | } | N | M | , | . | / | ' | |
||||
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------| |
||||
* | Ctrl | ` | GUI | Alt |Lower | Space|Pg-dwn| Pg-up| Space|Raise | Left | Down | Up |Right | |
||||
* `-------------------------------------------------------------------------------------------------' |
||||
*/ |
||||
[_QWERTY] = { |
||||
{KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_LPRN, KC_RPRN, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, |
||||
{MO(_FUNCTION), KC_A, KC_S, KC_D, KC_F, KC_G, KC_LBRC, KC_RBRC, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT}, |
||||
{OSM(MOD_LSFT), KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LCBR, KC_RCBR, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_QUOT}, |
||||
{KC_LCTL, KC_GRV, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_PGDN, KC_PGUP, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} |
||||
}, |
||||
|
||||
/* Lower
|
||||
* ,-------------------------------------------------------------------------------------------------. |
||||
* | Esc | ! | @ | # | $ | % | | | ^ | & | * | ( | ) | Del | |
||||
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------| |
||||
* | | F1 | F2 | F3 | F4 | F5 | | | F6 | _ | + | { | } |Enter | |
||||
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------| |
||||
* | | F7 | F8 | F9 | F10 | F11 | | | F12 | | | Mute | | | | |
||||
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------| |
||||
* | | | | |Lower | | | | Bksp |Raise | Next | Vol- | Vol+ | Play | |
||||
* `-------------------------------------------------------------------------------------------------' |
||||
*/ |
||||
[_LOWER] = { |
||||
{KC_ESC, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, _______, _______, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL}, |
||||
{_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, _______, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, _______}, |
||||
{_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, _______, _______, KC_F12, _______, _______, KC_MUTE, _______, KC_PIPE}, |
||||
{_______, _______, _______, _______, _______, _______, _______, _______, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} |
||||
}, |
||||
|
||||
/* Raise
|
||||
* ,-------------------------------------------------------------------------------------------------. |
||||
* | Esc | 1 | 2 | 3 | 4 | 5 | | | 6 | 7 | 8 | 9 | 0 | Del | |
||||
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------| |
||||
* | | 4 | 5 | 6 | + | | | | | - | = | [ | ] |Enter | |
||||
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------| |
||||
* |Enter | 7 | 8 | 9 | - | | | | | | | Mute | | \ | |
||||
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------| |
||||
* | | , | 0 | . |Lower | Bksp | | | |Raise | Next | Vol- | Vol+ | Play | |
||||
* `-------------------------------------------------------------------------------------------------' |
||||
*/ |
||||
[_RAISE] = { |
||||
{KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, _______, _______, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL}, |
||||
{_______, KC_4, KC_5, KC_6, KC_PLUS, _______, _______, _______, _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, _______}, |
||||
{KC_ENT, KC_7, KC_8, KC_9, KC_MINS, _______, _______, _______, _______, _______, _______, KC_MUTE, _______, KC_BSLS}, |
||||
{_______, KC_COMM, KC_0, KC_DOT, _______, KC_BSPC, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} |
||||
}, |
||||
|
||||
/* Adjust (Lower + Raise)
|
||||
* ,-------------------------------------------------------------------------------------------------. |
||||
* |Taskmg| Reset| | | | | | | | | | | |caltde| |
||||
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------| |
||||
* | | | | | | | | | | | | | | | |
||||
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------| |
||||
* | | | | | | | | | | | | | | | |
||||
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------| |
||||
* | | | | | | | | | | | | | | | |
||||
* `-------------------------------------------------------------------------------------------------' |
||||
*/ |
||||
[_ADJUST] = { |
||||
{TSKMGR, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, CALTDEL}, |
||||
{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, |
||||
{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, |
||||
{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} |
||||
}, |
||||
|
||||
/* Function
|
||||
* ,-------------------------------------------------------------------------------------------------. |
||||
* | | | | | | | | | | | Up | | | | |
||||
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------| |
||||
* | | | | | | | | | | Left | Down |Right | | | |
||||
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------| |
||||
* | Caps | | | | | | | | | | | | | | |
||||
* |------+------+------+------+------+------+------+------+------+------+------+------+------+------| |
||||
* | | | | | | | | | | | | | | | |
||||
* `-------------------------------------------------------------------------------------------------' |
||||
*/ |
||||
[_FUNCTION] = { |
||||
{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UP, _______, _______, _______}, |
||||
{_______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______}, |
||||
{KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}, |
||||
{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} |
||||
} |
||||
|
||||
}; |
||||
|
||||
#ifdef AUDIO_ENABLE |
||||
|
||||
float tone_startup[][2] = SONG(STARTUP_SOUND); |
||||
float tone_qwerty[][2] = SONG(QWERTY_SOUND); |
||||
float tone_dvorak[][2] = SONG(DVORAK_SOUND); |
||||
float tone_colemak[][2] = SONG(COLEMAK_SOUND); |
||||
float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); |
||||
|
||||
float tone_goodbye[][2] = SONG(GOODBYE_SOUND); |
||||
#endif |
||||
|
||||
|
||||
void persistant_default_layer_set(uint16_t default_layer) { |
||||
eeconfig_update_default_layer(default_layer); |
||||
default_layer_set(default_layer); |
||||
} |
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) { |
||||
switch (keycode) { |
||||
case QWERTY: |
||||
if (record->event.pressed) { |
||||
#ifdef AUDIO_ENABLE |
||||
PLAY_NOTE_ARRAY(tone_qwerty, false, 0); |
||||
#endif |
||||
persistant_default_layer_set(1UL<<_QWERTY); |
||||
} |
||||
return false; |
||||
break; |
||||
case LOWER: |
||||
if (record->event.pressed) { |
||||
layer_on(_LOWER); |
||||
update_tri_layer(_LOWER, _RAISE, _ADJUST); |
||||
} else { |
||||
layer_off(_LOWER); |
||||
update_tri_layer(_LOWER, _RAISE, _ADJUST); |
||||
} |
||||
return false; |
||||
break; |
||||
case RAISE: |
||||
if (record->event.pressed) { |
||||
layer_on(_RAISE); |
||||
update_tri_layer(_LOWER, _RAISE, _ADJUST); |
||||
} else { |
||||
layer_off(_RAISE); |
||||
update_tri_layer(_LOWER, _RAISE, _ADJUST); |
||||
} |
||||
return false; |
||||
break; |
||||
} |
||||
return true; |
||||
} |
||||
|
||||
void matrix_init_user(void) { |
||||
#ifdef AUDIO_ENABLE |
||||
startup_user(); |
||||
#endif |
||||
} |
||||
|
||||
#ifdef AUDIO_ENABLE |
||||
|
||||
void startup_user() |
||||
{ |
||||
_delay_ms(20); // gets rid of tick
|
||||
PLAY_NOTE_ARRAY(tone_startup, false, 0); |
||||
} |
||||
|
||||
void shutdown_user() |
||||
{ |
||||
PLAY_NOTE_ARRAY(tone_goodbye, false, 0); |
||||
_delay_ms(150); |
||||
stop_all_notes(); |
||||
} |
||||
|
||||
void music_on_user(void) |
||||
{ |
||||
music_scale_user(); |
||||
} |
||||
|
||||
void music_scale_user(void) |
||||
{ |
||||
PLAY_NOTE_ARRAY(music_scale, false, 0); |
||||
} |
||||
|
||||
#endif |
||||
@ -0,0 +1 @@ |
||||
# ECO Layout by u/That-Canadian |
||||
@ -0,0 +1,15 @@ |
||||
ECO |
||||
=== |
||||
|
||||
 |
||||
|
||||
An economical 4x14 ortholinear keyboard |
||||
|
||||
Keyboard Maintainer: BishopKeyboards and That-Canadian |
||||
Hardware Supported: ECO PCB rev1 Pro Micro |
||||
|
||||
Make example for this keyboard (after setting up your build environment): |
||||
|
||||
make eco-rev1-that_canadian |
||||
|
||||
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. |
||||
@ -0,0 +1,3 @@ |
||||
ifndef MAKEFILE_INCLUDED |
||||
include ../../Makefile
|
||||
endif |
||||
@ -0,0 +1,30 @@ |
||||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com> |
||||
|
||||
This program is free software: you can redistribute it and/or modify |
||||
it under the terms of the GNU General Public License as published by |
||||
the Free Software Foundation, either version 2 of the License, or |
||||
(at your option) any later version. |
||||
|
||||
This program is distributed in the hope that it will be useful, |
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
GNU General Public License for more details. |
||||
|
||||
You should have received a copy of the GNU General Public License |
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/ |
||||
|
||||
#ifndef REV1_CONFIG_H |
||||
#define REV1_CONFIG_H |
||||
|
||||
#include "../config.h" |
||||
|
||||
#define DEVICE_VER 0x0001 |
||||
|
||||
/* ECO V1 pin-out */ |
||||
#define MATRIX_ROW_PINS { B1, B6, B2, B3 } |
||||
#define MATRIX_COL_PINS { F4, F5, F6, F7, B5, B4, E6, D7, C6, D4, D0, D1, D2, D3 } |
||||
#define UNUSED_PINS |
||||
|
||||
#endif |
||||
@ -0,0 +1 @@ |
||||
#include "eco.h" |
||||
@ -0,0 +1,24 @@ |
||||
#ifndef REV1_H |
||||
#define REV1_H |
||||
|
||||
#include "../eco.h" |
||||
|
||||
//void promicro_bootloader_jmp(bool program);
|
||||
#include "quantum.h" |
||||
|
||||
//void promicro_bootloader_jmp(bool program);
|
||||
|
||||
#define KEYMAP( \ |
||||
k01, k02, k03, k04, k05, k06, k07, k08, k09, k010, k011, k012, k013, k014, \
|
||||
k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, k111, k112, k113, k114, \
|
||||
k21, k22, k23, k24, k25, k26, k27, k28, k29, k210, k211, k212, k213, k214, \
|
||||
k31, k32, k33, k34, k35, k36, k37, k38, k39, k310, k311, k312, k313, k314 \
|
||||
) \
|
||||
{ \
|
||||
{ k01, k02, k03, k04, k05, k06, k07, k08, k09, k010, k011, k012, k013, k014 }, \
|
||||
{ k11, k12, k13, k14, k15, k16, k17, k18, k19, k110, k111, k112, k113, k114 }, \
|
||||
{ k21, k22, k23, k24, k25, k26, k27, k28, k29, k210, k211, k212, k213, k214 }, \
|
||||
{ k31, k32, k33, k34, k35, k36, k37, k38, k39, k310, k311, k312, k313, k314 } \
|
||||
} |
||||
|
||||
#endif |
||||
@ -0,0 +1,5 @@ |
||||
BACKLIGHT_ENABLE = no
|
||||
|
||||
ifndef QUANTUM_DIR |
||||
include ../../../Makefile
|
||||
endif |
||||
@ -0,0 +1,68 @@ |
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE = yes # MIDI controls
|
||||
AUDIO_ENABLE = yes # Audio output on port C6
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
|
||||
API_SYSEX_ENABLE = no
|
||||
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
@ -1,6 +1,3 @@ |
||||
RGBLIGHT_ENABLE ?= yes
|
||||
MIDI_ENABLE ?= yes
|
||||
|
||||
ifndef QUANTUM_DIR |
||||
include ../../../../Makefile
|
||||
endif |
||||
|
||||
Binary file not shown.
@ -0,0 +1,199 @@ |
||||
/* Copyright 2017 Andreas Lindhé
|
||||
* |
||||
* This program is free software: you can redistribute it and/or modify |
||||
* it under the terms of the GNU General Public License as published by |
||||
* the Free Software Foundation, either version 2 of the License, or |
||||
* (at your option) any later version. |
||||
* |
||||
* This program is distributed in the hope that it will be useful, |
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
* GNU General Public License for more details. |
||||
* |
||||
* You should have received a copy of the GNU General Public License |
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/ |
||||
|
||||
#include "ergodox.h" |
||||
#include "debug.h" |
||||
#include "action_layer.h" |
||||
#include "keymap_swedish.h" |
||||
|
||||
#define BASE 0 // default layer
|
||||
#define SYMB 1 // symbols
|
||||
#define MDIA 2 // media keys
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { |
||||
/* Keymap 0: Basic layer
|
||||
* |
||||
* ,--------------------------------------------------. ,--------------------------------------------------. |
||||
* | Print | ! | " | # | # | % | | |Middle| & | / | ( | ) | = | ? | |
||||
* | Screen | 1 | 2 @ | 3 £ | 4 $ | 5 | F11 | |Mouse | 6 | 7 { | 8 [ | 9 ] | 0 } | + \ | |
||||
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| |
||||
* | Tab | Q | W | E | R | T | ~L1 | | L1 | Y | U | I | O | P | Å | |
||||
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| |
||||
* | CapsLk | A | S | D | F | G |------| |------| H | J | K | L | Ö | Ä | |
||||
* |--------+------+------+------+------+------| ` | | Del |------+------+------+------+------+--------| |
||||
* | LShft | Z | X | C | V | B | ' | | | N | M | , | . | - | RShift | |
||||
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' |
||||
* | LCtl | ^ | * | LAlt | LGui | | AltGr| Down | Up | Left | Right| |
||||
* | (') | " ~ | ' ´ | | | | | | | | | |
||||
* `----------------------------------' `----------------------------------' |
||||
* ,-------------. ,--------------. |
||||
* | LCtl | LAlt | | Home | End | |
||||
* ,------|------|------| |------+-------+------. |
||||
* | | | ~ | | PgUp | | | |
||||
* | Space|Back- |------| |------| Tab |Enter | |
||||
* | |space | Esc | | PgDn | | L2 | |
||||
* `--------------------' `---------------------' |
||||
*/ |
||||
|
||||
[BASE] = KEYMAP( // layer 0 : default
|
||||
// left hand
|
||||
KC_PSCR, KC_1, KC_2, KC_3, KC_4, KC_5, KC_F11, |
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, MO(SYMB), |
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, |
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, NO_ACUT, |
||||
CTL_T(NO_APOS), NO_CIRC, NO_ASTR, KC_LALT, KC_LGUI, |
||||
KC_LCTRL, KC_LALT, |
||||
NO_TILD, |
||||
KC_SPC, KC_BSPC, KC_ESC, |
||||
// right hand
|
||||
KC_MS_BTN3, KC_6, KC_7, KC_8, KC_9, KC_0, NO_PLUS, |
||||
TG(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, NO_AA, |
||||
KC_H, KC_J, KC_K, KC_L, NO_OSLH, NO_AE, |
||||
KC_DELT, KC_N, KC_M, KC_COMM, KC_DOT, NO_MINS, KC_RSFT, |
||||
NO_ALGR, KC_DOWN, KC_UP, KC_LEFT, KC_RGHT, |
||||
KC_HOME, KC_END, |
||||
KC_PGUP, |
||||
KC_PGDN, KC_TAB, LT(MDIA, KC_ENT) |
||||
), |
||||
|
||||
/* Keymap 1: Symbol Layer
|
||||
* |
||||
* ,--------------------------------------------------. ,--------------------------------------------------. |
||||
* | | | | | | | | | | | | / | * | - | | |
||||
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| |
||||
* | | F1 | F2 | F3 | F4 | | | | | | 7 | 8 | 9 | + | | |
||||
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| |
||||
* | | F5 | F6 | F7 | F8 | |------| |------| | 4 | 5 | 6 | + | | |
||||
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| |
||||
* | | F9 | F10 | F11 | F12 | | | | | | 1 | 2 | 3 | Enter| | |
||||
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' |
||||
* | | | | | | | 0 | , | . | Enter| | |
||||
* `----------------------------------' `----------------------------------' |
||||
* ,-------------. ,-------------. |
||||
* | | | | | | |
||||
* ,------|------|------| |------+------+------. |
||||
* | | | | | | | | |
||||
* | | |------| |------| | | |
||||
* | | | | | | | | |
||||
* `--------------------' `--------------------' |
||||
*/ |
||||
// SYMBOLS
|
||||
[SYMB] = KEYMAP( |
||||
// left hand
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, |
||||
KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_TRNS, KC_TRNS, |
||||
KC_TRNS, KC_F5, KC_F6, KC_F7, KC_F8, KC_TRNS, |
||||
KC_TRNS, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, |
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, |
||||
KC_TRNS,KC_TRNS, |
||||
KC_TRNS, |
||||
KC_TRNS,KC_TRNS,KC_TRNS, |
||||
// right hand
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_PSLS, KC_PAST, KC_PMNS, KC_TRNS, |
||||
KC_TRNS, KC_TRNS, KC_7, KC_8, KC_9, KC_PPLS, KC_TRNS, |
||||
KC_TRNS, KC_4, KC_5, KC_6, KC_PPLS, KC_TRNS, |
||||
RESET, KC_TRNS, KC_1, KC_2, KC_3, KC_PENT, KC_TRNS, |
||||
KC_0, KC_COMM, KC_DOT, KC_PENT, KC_TRNS, |
||||
KC_TRNS, KC_TRNS, |
||||
KC_TRNS, |
||||
KC_TRNS, KC_TRNS, KC_TRNS |
||||
), |
||||
/* Keymap 2: Media and mouse keys
|
||||
* |
||||
* ,--------------------------------------------------. ,--------------------------------------------------. |
||||
* | | | | | | | | | | | | | | | | |
||||
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| |
||||
* | | | | MsUp | | | | | | | | | | | | |
||||
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| |
||||
* | | |MsLeft|MsDown|MsRght| |------| |------| | Play | Pause| Prev | Next | | |
||||
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| |
||||
* | | | | Lclk | Rclk | | | | | |VolDn |VolUp | Mute | | | |
||||
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' |
||||
* | | | | | | | | | | | | |
||||
* `----------------------------------' `----------------------------------' |
||||
* ,-------------. ,-------------. |
||||
* | | | | | | |
||||
* ,------|------|------| |------+------+------. |
||||
* | | | | | | | | |
||||
* |LeClk |RiClk |------| |------| | | |
||||
* | | | | | | | | |
||||
* `--------------------' `--------------------' |
||||
*/ |
||||
// MEDIA AND MOUSE
|
||||
[MDIA] = KEYMAP( |
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, |
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_MS_U, KC_TRNS, KC_TRNS, KC_TRNS, |
||||
KC_TRNS, KC_TRNS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, |
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_BTN1, KC_BTN2, KC_TRNS, KC_TRNS, |
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, |
||||
KC_TRNS, KC_TRNS, |
||||
KC_TRNS, |
||||
KC_BTN1, KC_BTN2, KC_TRNS, |
||||
// right hand
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, |
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, |
||||
KC_TRNS, KC_MPLY, KC_MPLY, KC_MPRV, KC_MNXT, KC_TRNS, |
||||
KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, |
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, |
||||
KC_TRNS, KC_TRNS, |
||||
KC_TRNS, |
||||
KC_TRNS, KC_TRNS, KC_TRNS |
||||
), |
||||
}; |
||||
|
||||
const uint16_t PROGMEM fn_actions[] = { |
||||
[1] = ACTION_LAYER_TAP_TOGGLE(SYMB) // FN1 - Momentary Layer 1 (Symbols)
|
||||
}; |
||||
|
||||
// Runs just one time when the keyboard initializes.
|
||||
void matrix_init_user(void) { |
||||
|
||||
}; |
||||
|
||||
// Runs constantly in the background, in a loop.
|
||||
void matrix_scan_user(void) { |
||||
|
||||
uint8_t layer = biton32(layer_state); |
||||
|
||||
ergodox_board_led_off(); |
||||
ergodox_right_led_1_off(); |
||||
ergodox_right_led_2_off(); |
||||
ergodox_right_led_3_off(); |
||||
switch (layer) { |
||||
// TODO: Make this relevant to the ErgoDox EZ.
|
||||
case 1: |
||||
ergodox_right_led_3_on(); |
||||
break; |
||||
case 2: |
||||
ergodox_right_led_2_on(); |
||||
break; |
||||
case 3: |
||||
ergodox_right_led_2_on(); |
||||
ergodox_right_led_3_on(); |
||||
break; |
||||
default: |
||||
// none
|
||||
break; |
||||
} |
||||
|
||||
if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) { |
||||
// if capslk is on, set led 1 on
|
||||
ergodox_right_led_1_on(); |
||||
} else { |
||||
ergodox_right_led_1_off(); |
||||
} |
||||
|
||||
}; |
||||
@ -0,0 +1,50 @@ |
||||
# swedish-lindhe ErgoDox (EZ) keymap |
||||
|
||||
This is a setup that is very useful for me. It may or may not be for |
||||
you. I will use it in conjunction with the A5 overlayed sv_SE layout. |
||||
|
||||
The layout is subject to change (in particular I'm thinking about adding |
||||
a macro recording feature), but it have not changed much the past year |
||||
or two so you can expect it to be stable enough to learn it. |
||||
|
||||
A5: http://aoeu.info/s/dvorak/svorak |
||||
My xkb map: https://github.com/lindhe/dotfiles/blob/master/usr/share/X11/xkb/symbols/se-A5 |
||||
|
||||
The most major points: |
||||
====================== |
||||
|
||||
I think the layout image can be found on |
||||
[www.keyboard-layout-editor.com](http://www.keyboard-layout-editor.com/#/gists/d84bc5915707cb30a4f9f754e06ecea3) |
||||
|
||||
L0: |
||||
--- |
||||
|
||||
* Easily accessible F11 key for fullscreening |
||||
* Print screen |
||||
* Middle mouse button for X-paste |
||||
* Improved reachability of meta buttons (LCtrl, LALt, AltGr, LGui etc.) |
||||
* Cluster Page Up/Down + Home/End by the right thumb |
||||
* Vim-like arrow layout in right bottom row |
||||
|
||||
* Set media layer toggle to right thumb (Enter) |
||||
* Set apostrophe on LCtl (putting it next to some other small |
||||
characters) |
||||
|
||||
L1: |
||||
--- |
||||
|
||||
* Full function key layout |
||||
* Teensy button |
||||
|
||||
L2: |
||||
--- |
||||
|
||||
* Improved media buttons layout (close by the jkl; Vim binding) |
||||
* Improved layout of emulated mouse buttons |
||||
|
||||
LED behaviour to binary+CAPS |
||||
============================ |
||||
|
||||
The ErgoDox LEDs on this layout is using the two rightmost LEDs as the |
||||
two LSB in a two digit binary number, representing layer 0, 1, 2 and 3. |
||||
The leftmost byte/LED indicates CAPS status. |
||||
@ -0,0 +1,3 @@ |
||||
ifndef MAKEFILE_INCLUDED |
||||
include ../../../Makefile
|
||||
endif |
||||
@ -0,0 +1,24 @@ |
||||
Magicforce "61" Handwired |
||||
======================= |
||||
|
||||
Basically I cut 7 keys off the magicforce68 and handwired everything to a |
||||
teensy++ 2.0 to make it a ~60% board. |
||||
|
||||
## Wiring Layout |
||||
|
||||
 |
||||
|
||||
## Pinout |
||||
|
||||
The following pins are used: |
||||
|
||||
``` |
||||
#define MATRIX_ROW_PINS { D0, D1, D2, D3, D4 } |
||||
#define MATRIX_COL_PINS { B5, B4, B3, B2, B1, B0, E7, E6, F0, F1, F2, F3, F4, F5 } |
||||
``` |
||||
|
||||
## Compiling and loading the firmware |
||||
|
||||
To build the firmware, run `make handwired-magicforce61`. |
||||
|
||||
Flash the firmware using the teensy loader or avrdude. |
||||
@ -0,0 +1,162 @@ |
||||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com> |
||||
|
||||
This program is free software: you can redistribute it and/or modify |
||||
it under the terms of the GNU General Public License as published by |
||||
the Free Software Foundation, either version 2 of the License, or |
||||
(at your option) any later version. |
||||
|
||||
This program is distributed in the hope that it will be useful, |
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
GNU General Public License for more details. |
||||
|
||||
You should have received a copy of the GNU General Public License |
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/ |
||||
|
||||
#ifndef CONFIG_H |
||||
#define CONFIG_H |
||||
|
||||
#include "config_common.h" |
||||
|
||||
/* USB Device descriptor parameter */ |
||||
#define VENDOR_ID 0xFEED |
||||
#define PRODUCT_ID 0x6060 |
||||
#define DEVICE_VER 0x0001 |
||||
#define MANUFACTURER Hexwire |
||||
#define PRODUCT Magicforce 61 |
||||
#define DESCRIPTION Handwired Magicforce 61 |
||||
|
||||
/* key matrix size */ |
||||
#define MATRIX_ROWS 5 |
||||
#define MATRIX_COLS 14 |
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments |
||||
* |
||||
* Change this to how you wired your keyboard |
||||
* COLS: AVR pins used for columns, left to right |
||||
* ROWS: AVR pins used for rows, top to bottom |
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) |
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) |
||||
* |
||||
*/ |
||||
#define MATRIX_ROW_PINS { D0, D1, D2, D3, D4 } |
||||
#define MATRIX_COL_PINS { B5, B4, B3, B2, B1, B0, E7, E6, F0, F1, F2, F3, F4, F5 } |
||||
#define UNUSED_PINS |
||||
|
||||
/* COL2ROW or ROW2COL */ |
||||
#define DIODE_DIRECTION COL2ROW |
||||
|
||||
// #define BACKLIGHT_PIN B7
|
||||
// #define BACKLIGHT_BREATHING
|
||||
// #define BACKLIGHT_LEVELS 3
|
||||
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ |
||||
#define DEBOUNCING_DELAY 5 |
||||
|
||||
/* define if matrix has ghost (lacks anti-ghosting diodes) */ |
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* number of backlight levels */ |
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ |
||||
#define LOCKING_SUPPORT_ENABLE |
||||
/* Locking resynchronize hack */ |
||||
#define LOCKING_RESYNC_ENABLE |
||||
|
||||
/*
|
||||
* Force NKRO |
||||
* |
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved |
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the |
||||
* makefile for this to work.) |
||||
* |
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) |
||||
* until the next keyboard reset. |
||||
* |
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is |
||||
* fully operational during normal computer usage. |
||||
* |
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) |
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by |
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a |
||||
* power-up. |
||||
* |
||||
*/ |
||||
//#define FORCE_NKRO
|
||||
|
||||
/*
|
||||
* Magic Key Options |
||||
* |
||||
* Magic keys are hotkey commands that allow control over firmware functions of |
||||
* the keyboard. They are best used in combination with the HID Listen program, |
||||
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
||||
* |
||||
* The options below allow the magic key functionality to be changed. This is |
||||
* useful if your keyboard/keypad is missing keys and you want magic key support. |
||||
* |
||||
*/ |
||||
|
||||
/* key combination for magic key command */ |
||||
#define IS_COMMAND() ( \ |
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
) |
||||
|
||||
/* control how magic key switches layers */ |
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
||||
|
||||
/* override magic key keymap */ |
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
||||
//#define MAGIC_KEY_HELP1 H
|
||||
//#define MAGIC_KEY_HELP2 SLASH
|
||||
//#define MAGIC_KEY_DEBUG D
|
||||
//#define MAGIC_KEY_DEBUG_MATRIX X
|
||||
//#define MAGIC_KEY_DEBUG_KBD K
|
||||
//#define MAGIC_KEY_DEBUG_MOUSE M
|
||||
//#define MAGIC_KEY_VERSION V
|
||||
//#define MAGIC_KEY_STATUS S
|
||||
//#define MAGIC_KEY_CONSOLE C
|
||||
//#define MAGIC_KEY_LAYER0_ALT1 ESC
|
||||
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
|
||||
//#define MAGIC_KEY_LAYER0 0
|
||||
//#define MAGIC_KEY_LAYER1 1
|
||||
//#define MAGIC_KEY_LAYER2 2
|
||||
//#define MAGIC_KEY_LAYER3 3
|
||||
//#define MAGIC_KEY_LAYER4 4
|
||||
//#define MAGIC_KEY_LAYER5 5
|
||||
//#define MAGIC_KEY_LAYER6 6
|
||||
//#define MAGIC_KEY_LAYER7 7
|
||||
//#define MAGIC_KEY_LAYER8 8
|
||||
//#define MAGIC_KEY_LAYER9 9
|
||||
//#define MAGIC_KEY_BOOTLOADER PAUSE
|
||||
//#define MAGIC_KEY_LOCK CAPS
|
||||
//#define MAGIC_KEY_EEPROM E
|
||||
//#define MAGIC_KEY_NKRO N
|
||||
//#define MAGIC_KEY_SLEEP_LED Z
|
||||
|
||||
/*
|
||||
* Feature disable options |
||||
* These options are also useful to firmware size reduction. |
||||
*/ |
||||
|
||||
/* disable debug print */ |
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */ |
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */ |
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
#endif |
||||
@ -0,0 +1,69 @@ |
||||
#include "magicforce61.h" |
||||
|
||||
#define _QWERTY 0 |
||||
#define _FN1 1 |
||||
#define _FN2 2 |
||||
#define KC_ KC_TRNS |
||||
#define KC_X0 LT(_FN2, KC_GRV) |
||||
#define KC_X1 MO(_FN1) |
||||
#define KC_NAV_ESC LT(_FN1, KC_ESC) |
||||
#define KC_GUI MAGIC_UNNO_GUI |
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { |
||||
[_QWERTY] = KEYMAP( |
||||
/*,----+----+----+----+----+----+----+----+----+----+----+----+----+--------. */ |
||||
GRV , 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 , 9 , 0 ,MINS,EQL , BSPC , |
||||
/*|----`----`----`----`----`----`----`----`----`----`----`----`----`--------| */ |
||||
TAB , Q , W , E , R , T , Y , U , I , O , P ,LBRC,RBRC, BSLS , |
||||
/*|------`----`----`----`----`----`----`----`----`----`----`----`----`------| */ |
||||
NAV_ESC , A , S , D , F , G , H , J , K , L ,SCLN,QUOT, ENTER , |
||||
/*|-------`----`----`----`----`----`----`----`----`----`----`----`----------| */ |
||||
LSPO , Z , X , C , V , B , N , M ,COMM,DOT ,SLSH, RSPC , |
||||
/*|---------`----`----`----`----`----`----`----`----`----`----`-------------. */ |
||||
LCTL , RGUI ,LALT , SPACE , X1 ,RALT ,RCTL , X1 |
||||
/*`-----+-----+-----+------------------------------+------+-----+-----' ANY */ |
||||
), |
||||
|
||||
[_FN1] = KEYMAP( |
||||
/*,----+----+----+----+----+----+----+----+----+----+----+----+----+--------. */ |
||||
GRV , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,F11 ,F12 , BSPC , |
||||
/*|esc-`-1--`-2--`-3--`-4--`-5--`-6--`-7--`-8--`-9--`-0--`mnus`plus`--bksp--| */ |
||||
, , UP , , , , , ,INS ,PSCR, , , , , |
||||
/*|tab---`-q--`-w--`-e--`-r--`-t--`-y--`-u--`-i--`-o--`-p--`-{--`-}--`--|---| */ |
||||
,LEFT,DOWN,RGHT, , , , PGDN , PGUP , , , , , |
||||
/*|caps---`-a--`-s--`-d--`-f--`-g--`-h--`-j--`-k--`-l--`-;--`-'--`----enter-| */ |
||||
, , , , , ,VOLD,VOLU,MUTE, , , , |
||||
/*|shift----`-z--`-x--`-c--`-v--`-b--`-n--`-m--`-,--`-.--`-/--`-------shift-. */ |
||||
, , , , , , , MPLY |
||||
/*`ctrl-+-gui-+-alt-+----------space---------------+-fn---+-alt-+ctrl-' ANY */ |
||||
), |
||||
|
||||
[_FN2] = KEYMAP( |
||||
/*,----+----+----+----+----+----+----+----+----+----+----+----+----+--------. */ |
||||
GRV , F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 ,F10 ,F11 ,F12 , BSPC , |
||||
/*|esc-`-1--`-2--`-3--`-4--`-5--`-6--`-7--`-8--`-9--`-0--`mnus`plus`--bksp--| */ |
||||
, , , , , , , 7 , 8 , 9 , , , , , |
||||
/*|tab---`-q--`-w--`-e--`-r--`-t--`-y--`-u--`-i--`-o--`-p--`-{--`-}--`--|---| */ |
||||
, , , , , , , 4 , 5 , 6 , , , , |
||||
/*|caps---`-a--`-s--`-d--`-f--`-g--`-h--`-j--`-k--`-l--`-;--`-'--`----enter-| */ |
||||
, , , , , , 0 , 1 , 2 , 3 , , , |
||||
/*|shift----`-z--`-x--`-c--`-v--`-b--`-n--`-m--`-,--`-.--`-/--`-------shift-. */ |
||||
, , , , , , , |
||||
/*`ctrl-+-gui-+-alt-+----------space---------------+-fn---+-alt-+ctrl-' ANY */ |
||||
) |
||||
}; |
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) |
||||
{ |
||||
// MACRODOWN only works in this function
|
||||
switch(id) { |
||||
case 0: |
||||
if (record->event.pressed) { |
||||
register_code(KC_RSFT); |
||||
} else { |
||||
unregister_code(KC_RSFT); |
||||
} |
||||
break; |
||||
} |
||||
return MACRO_NONE; |
||||
}; |
||||
@ -0,0 +1,8 @@ |
||||
#include "magicforce61.h" |
||||
|
||||
void matrix_init_kb(void) { |
||||
// put your keyboard start-up code here
|
||||
// runs once when the firmware starts up
|
||||
|
||||
matrix_init_user(); |
||||
} |
||||
@ -0,0 +1,20 @@ |
||||
#ifndef MAGICFORCE61_H |
||||
#define MAGICFORCE61_H |
||||
|
||||
#include "quantum.h" |
||||
|
||||
#define KEYMAP( \ |
||||
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \
|
||||
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
|
||||
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \
|
||||
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3D, \
|
||||
K40, K41, K42, K45, K49, K4A, K4C, K4D \
|
||||
) { \
|
||||
{ KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D }, \
|
||||
{ KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D }, \
|
||||
{ KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_NO, KC_##K2D }, \
|
||||
{ KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_NO, KC_NO, KC_##K3D }, \
|
||||
{ KC_##K40, KC_##K41, KC_##K42, KC_NO, KC_NO, KC_##K45, KC_NO, KC_NO, KC_NO, KC_##K49, KC_##K4A, KC_NO, KC_##K4C, KC_##K4D }, \
|
||||
} |
||||
|
||||
#endif |
||||
@ -0,0 +1,83 @@ |
||||
|
||||
# MCU name
|
||||
MCU = at90usb1286
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=1024
|
||||
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE ?= no # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE ?= no # Audio output on port C6
|
||||
|
||||
ifndef QUANTUM_DIR |
||||
include ../../../Makefile
|
||||
endif |
||||
|
||||
avrdude: build |
||||
ls /dev/tty* > /tmp/1; \
|
||||
echo "Reset your Pro Micro now"; \
|
||||
while [[ -z $$USB ]]; do \
|
||||
sleep 1; \
|
||||
ls /dev/tty* > /tmp/2; \
|
||||
USB=`diff /tmp/1 /tmp/2 | grep -o '/dev/tty.*'`; \
|
||||
done; \
|
||||
avrdude -p $(MCU) -c avr109 -P $$USB -U flash:w:$(BUILD_DIR)/$(TARGET).hex
|
||||
|
||||
.PHONY: avrdude |
||||
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in new issue