|
|
|
|
@ -20,15 +20,14 @@ |
|
|
|
|
#include <stdint.h> |
|
|
|
|
#include <stdbool.h> |
|
|
|
|
#include "quantum.h" |
|
|
|
|
#include "ledmatrix.h" |
|
|
|
|
#include "rgb7seg.h" |
|
|
|
|
#include "is31fl3235a.h" |
|
|
|
|
#include "progmem.h" |
|
|
|
|
#include "config.h" |
|
|
|
|
#include "eeprom.h" |
|
|
|
|
#include <string.h> |
|
|
|
|
#include <math.h> |
|
|
|
|
|
|
|
|
|
led_config_t led_matrix_config; |
|
|
|
|
|
|
|
|
|
#ifndef MAX |
|
|
|
|
#define MAX(X, Y) ((X) > (Y) ? (X) : (Y)) |
|
|
|
|
#endif |
|
|
|
|
@ -37,355 +36,135 @@ led_config_t led_matrix_config; |
|
|
|
|
#define MIN(a,b) ((a) < (b)? (a): (b)) |
|
|
|
|
#endif |
|
|
|
|
|
|
|
|
|
#ifndef LED_DISABLE_AFTER_TIMEOUT |
|
|
|
|
#define LED_DISABLE_AFTER_TIMEOUT 0 |
|
|
|
|
// State variables
|
|
|
|
|
uint32_t g7_tick = 0; // Global tick at 20 Hz
|
|
|
|
|
bool rgb7seg_enabled = 0; // Whether or not the display is turned on
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
const rgb7seg_led g_rgb7seg_leds[IS31FL3235A_COUNT * 8][4] = { |
|
|
|
|
/ * Refer to IS31 manual for these locations |
|
|
|
|
* driver |
|
|
|
|
* | R LED address |
|
|
|
|
* | | G LED address |
|
|
|
|
* | | | B LED address |
|
|
|
|
* | | | | * / |
|
|
|
|
{0, OUT17, OUT16, OUT15}, // A, top middle
|
|
|
|
|
{0, OUT22, OUT21, OUT20}, // B, top right
|
|
|
|
|
{0, OUT26, OUT27, OUT28}, // C, bottom right
|
|
|
|
|
{0, OUT1, OUT2, OUT3}, // D, bottom center
|
|
|
|
|
{0, OUT23, OUT24, OUT25}, // DP, dot
|
|
|
|
|
{0, OUT4, OUT5, OUT6}, // E, bottom left
|
|
|
|
|
{0, OUT9, OUT7, OUT8}, // F, top left
|
|
|
|
|
{0, OUT14, OUT13, OUT12}, // G, center
|
|
|
|
|
#if IS31FL3235A_COUNT > 1 |
|
|
|
|
{1, OUT17, OUT16, OUT15}, // A, top middle
|
|
|
|
|
{1, OUT22, OUT21, OUT20}, // B, top right
|
|
|
|
|
{1, OUT26, OUT27, OUT28}, // C, bottom right
|
|
|
|
|
{1, OUT1, OUT2, OUT3}, // D, bottom center
|
|
|
|
|
{1, OUT23, OUT24, OUT25}, // DP, dot
|
|
|
|
|
{1, OUT4, OUT5, OUT6}, // E, bottom left
|
|
|
|
|
{1, OUT9, OUT7, OUT8}, // F, top left
|
|
|
|
|
{1, OUT14, OUT13, OUT12}, // G, center
|
|
|
|
|
#endif |
|
|
|
|
|
|
|
|
|
#ifndef LED_DISABLE_WHEN_USB_SUSPENDED |
|
|
|
|
#define LED_DISABLE_WHEN_USB_SUSPENDED false |
|
|
|
|
#if IS31FL3235A_COUNT > 2 |
|
|
|
|
{2, OUT17, OUT16, OUT15}, // A, top middle
|
|
|
|
|
{2, OUT17, OUT16, OUT15}, // A, top middle
|
|
|
|
|
{2, OUT22, OUT21, OUT20}, // B, top right
|
|
|
|
|
{2, OUT26, OUT27, OUT28}, // C, bottom right
|
|
|
|
|
{2, OUT1, OUT2, OUT3}, // D, bottom center
|
|
|
|
|
{2, OUT23, OUT24, OUT25}, // DP, dot
|
|
|
|
|
{2, OUT4, OUT5, OUT6}, // E, bottom left
|
|
|
|
|
{2, OUT9, OUT7, OUT8}, // F, top left
|
|
|
|
|
{2, OUT14, OUT13, OUT12}, // G, center
|
|
|
|
|
#endif |
|
|
|
|
|
|
|
|
|
#ifndef EECONFIG_LED_MATRIX |
|
|
|
|
#define EECONFIG_LED_MATRIX EECONFIG_RGBLIGHT |
|
|
|
|
#if IS31FL3235A_COUNT > 3 |
|
|
|
|
{3, OUT17, OUT16, OUT15}, // A, top middle
|
|
|
|
|
{3, OUT22, OUT21, OUT20}, // B, top right
|
|
|
|
|
{3, OUT26, OUT27, OUT28}, // C, bottom right
|
|
|
|
|
{3, OUT1, OUT2, OUT3}, // D, bottom center
|
|
|
|
|
{3, OUT23, OUT24, OUT25}, // DP, dot
|
|
|
|
|
{3, OUT4, OUT5, OUT6}, // E, bottom left
|
|
|
|
|
{3, OUT9, OUT7, OUT8}, // F, top left
|
|
|
|
|
{3, OUT14, OUT13, OUT12}, // G, center
|
|
|
|
|
{3, OUT22, OUT21, OUT20}, // B, top right
|
|
|
|
|
#endif |
|
|
|
|
}; |
|
|
|
|
*/ |
|
|
|
|
|
|
|
|
|
#if !defined(LED_MATRIX_MAXIMUM_BRIGHTNESS) || LED_MATRIX_MAXIMUM_BRIGHTNESS > 255 |
|
|
|
|
#define LED_MATRIX_MAXIMUM_BRIGHTNESS 255 |
|
|
|
|
// API
|
|
|
|
|
void rgb7seg_flush(void) { |
|
|
|
|
IS31FL3235A_update_pwm_buffers(IS31FL3235A_DRIVER_ADDR_1, 0); |
|
|
|
|
#if IS31FL3235A_COUNT > 1 |
|
|
|
|
IS31FL3235A_update_pwm_buffers(IS31FL3235A_DRIVER_ADDR_2, 1); |
|
|
|
|
#endif |
|
|
|
|
|
|
|
|
|
bool g_suspend_state = false; |
|
|
|
|
|
|
|
|
|
// Global tick at 20 Hz
|
|
|
|
|
uint32_t g_tick = 0; |
|
|
|
|
|
|
|
|
|
// Ticks since this key was last hit.
|
|
|
|
|
uint8_t g_key_hit[LED_DRIVER_LED_COUNT]; |
|
|
|
|
|
|
|
|
|
// Ticks since any key was last hit.
|
|
|
|
|
uint32_t g_any_key_hit = 0; |
|
|
|
|
|
|
|
|
|
uint32_t eeconfig_read_led_matrix(void) { |
|
|
|
|
return eeprom_read_dword(EECONFIG_LED_MATRIX); |
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
void eeconfig_update_led_matrix(uint32_t config_value) { |
|
|
|
|
eeprom_update_dword(EECONFIG_LED_MATRIX, config_value); |
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
void eeconfig_update_led_matrix_default(void) { |
|
|
|
|
dprintf("eeconfig_update_led_matrix_default\n"); |
|
|
|
|
led_matrix_config.enable = 1; |
|
|
|
|
led_matrix_config.mode = LED_MATRIX_UNIFORM_BRIGHTNESS; |
|
|
|
|
led_matrix_config.val = 128; |
|
|
|
|
led_matrix_config.speed = 0; |
|
|
|
|
eeconfig_update_led_matrix(led_matrix_config.raw); |
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
void eeconfig_debug_led_matrix(void) { |
|
|
|
|
dprintf("led_matrix_config eeprom\n"); |
|
|
|
|
dprintf("led_matrix_config.enable = %d\n", led_matrix_config.enable); |
|
|
|
|
dprintf("led_matrix_config.mode = %d\n", led_matrix_config.mode); |
|
|
|
|
dprintf("led_matrix_config.val = %d\n", led_matrix_config.val); |
|
|
|
|
dprintf("led_matrix_config.speed = %d\n", led_matrix_config.speed); |
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
// Last led hit
|
|
|
|
|
#ifndef LED_HITS_TO_REMEMBER |
|
|
|
|
#define LED_HITS_TO_REMEMBER 8 |
|
|
|
|
#if IS31FL3235A_COUNT > 2 |
|
|
|
|
IS31FL3235A_update_pwm_buffers(IS31FL3235A_DRIVER_ADDR_3, 2); |
|
|
|
|
#endif |
|
|
|
|
uint8_t g_last_led_hit[LED_HITS_TO_REMEMBER] = {255}; |
|
|
|
|
uint8_t g_last_led_count = 0; |
|
|
|
|
|
|
|
|
|
void map_row_column_to_led(uint8_t row, uint8_t column, uint8_t *led_i, uint8_t *led_count) { |
|
|
|
|
led_matrix led; |
|
|
|
|
*led_count = 0; |
|
|
|
|
|
|
|
|
|
for (uint8_t i = 0; i < LED_DRIVER_LED_COUNT; i++) { |
|
|
|
|
// map_index_to_led(i, &led);
|
|
|
|
|
led = g_leds[i]; |
|
|
|
|
if (row == led.matrix_co.row && column == led.matrix_co.col) { |
|
|
|
|
led_i[*led_count] = i; |
|
|
|
|
(*led_count)++; |
|
|
|
|
} |
|
|
|
|
} |
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
void led_matrix_update_pwm_buffers(void) { |
|
|
|
|
led_matrix_driver.flush(); |
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
void led_matrix_set_index_value(int index, uint8_t value) { |
|
|
|
|
led_matrix_driver.set_value(index, value); |
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
void led_matrix_set_index_value_all(uint8_t value) { |
|
|
|
|
led_matrix_driver.set_value_all(value); |
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
bool process_led_matrix(uint16_t keycode, keyrecord_t *record) { |
|
|
|
|
if (record->event.pressed) { |
|
|
|
|
uint8_t led[8], led_count; |
|
|
|
|
map_row_column_to_led(record->event.key.row, record->event.key.col, led, &led_count); |
|
|
|
|
if (led_count > 0) { |
|
|
|
|
for (uint8_t i = LED_HITS_TO_REMEMBER; i > 1; i--) { |
|
|
|
|
g_last_led_hit[i - 1] = g_last_led_hit[i - 2]; |
|
|
|
|
} |
|
|
|
|
g_last_led_hit[0] = led[0]; |
|
|
|
|
g_last_led_count = MIN(LED_HITS_TO_REMEMBER, g_last_led_count + 1); |
|
|
|
|
} |
|
|
|
|
for(uint8_t i = 0; i < led_count; i++) |
|
|
|
|
g_key_hit[led[i]] = 0; |
|
|
|
|
g_any_key_hit = 0; |
|
|
|
|
} else { |
|
|
|
|
#ifdef LED_MATRIX_KEYRELEASES |
|
|
|
|
uint8_t led[8], led_count; |
|
|
|
|
map_row_column_to_led(record->event.key.row, record->event.key.col, led, &led_count); |
|
|
|
|
for(uint8_t i = 0; i < led_count; i++) |
|
|
|
|
g_key_hit[led[i]] = 255; |
|
|
|
|
|
|
|
|
|
g_any_key_hit = 255; |
|
|
|
|
#if IS31FL3235A_COUNT > 3 |
|
|
|
|
IS31FL3235A_update_pwm_buffers(IS31FL3235A_DRIVER_ADDR_4, 3); |
|
|
|
|
#endif |
|
|
|
|
} |
|
|
|
|
return true; |
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
void led_matrix_set_suspend_state(bool state) { |
|
|
|
|
g_suspend_state = state; |
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
// All LEDs off
|
|
|
|
|
void led_matrix_all_off(void) { |
|
|
|
|
led_matrix_set_index_value_all(0); |
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
// Uniform brightness
|
|
|
|
|
void led_matrix_uniform_brightness(void) { |
|
|
|
|
led_matrix_set_index_value_all(LED_MATRIX_MAXIMUM_BRIGHTNESS / BACKLIGHT_LEVELS * led_matrix_config.val); |
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
void led_matrix_custom(void) {} |
|
|
|
|
|
|
|
|
|
void led_matrix_task(void) { |
|
|
|
|
if (!led_matrix_config.enable) { |
|
|
|
|
led_matrix_all_off(); |
|
|
|
|
led_matrix_indicators(); |
|
|
|
|
return; |
|
|
|
|
void rgb7seg_set_index_value(int index, uint8_t value) { |
|
|
|
|
IS31FL3235A_set_value(index, value); |
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
g_tick++; |
|
|
|
|
|
|
|
|
|
if (g_any_key_hit < 0xFFFFFFFF) { |
|
|
|
|
g_any_key_hit++; |
|
|
|
|
void rgb7seg_set_index_value_all(uint8_t value) { |
|
|
|
|
IS31FL3235A_set_value_all(value); |
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
for (int led = 0; led < LED_DRIVER_LED_COUNT; led++) { |
|
|
|
|
if (g_key_hit[led] < 255) { |
|
|
|
|
if (g_key_hit[led] == 254) |
|
|
|
|
g_last_led_count = MAX(g_last_led_count - 1, 0); |
|
|
|
|
g_key_hit[led]++; |
|
|
|
|
} |
|
|
|
|
// All LEDs off
|
|
|
|
|
void rgb7seg_off(void) { |
|
|
|
|
rgb7seg_set_index_value_all(0); |
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
// Ideally we would also stop sending zeros to the LED driver PWM buffers
|
|
|
|
|
// while suspended and just do a software shutdown. This is a cheap hack for now.
|
|
|
|
|
bool suspend_backlight = ((g_suspend_state && LED_DISABLE_WHEN_USB_SUSPENDED) || |
|
|
|
|
(LED_DISABLE_AFTER_TIMEOUT > 0 && g_any_key_hit > LED_DISABLE_AFTER_TIMEOUT * 60 * 20)); |
|
|
|
|
uint8_t effect = suspend_backlight ? 0 : led_matrix_config.mode; |
|
|
|
|
|
|
|
|
|
// this gets ticked at 20 Hz.
|
|
|
|
|
// each effect can opt to do calculations
|
|
|
|
|
// and/or request PWM buffer updates.
|
|
|
|
|
switch (effect) { |
|
|
|
|
case LED_MATRIX_UNIFORM_BRIGHTNESS: |
|
|
|
|
led_matrix_uniform_brightness(); |
|
|
|
|
break; |
|
|
|
|
default: |
|
|
|
|
led_matrix_custom(); |
|
|
|
|
break; |
|
|
|
|
} |
|
|
|
|
void rgb7seg_task(void) { |
|
|
|
|
g7_tick++; |
|
|
|
|
|
|
|
|
|
if (!suspend_backlight) { |
|
|
|
|
led_matrix_indicators(); |
|
|
|
|
} |
|
|
|
|
// Do something here?
|
|
|
|
|
|
|
|
|
|
// Tell the LED driver to update its state
|
|
|
|
|
led_matrix_driver.flush(); |
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
void led_matrix_indicators(void) { |
|
|
|
|
led_matrix_indicators_kb(); |
|
|
|
|
led_matrix_indicators_user(); |
|
|
|
|
rgb7seg_flush(); |
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
__attribute__((weak)) |
|
|
|
|
void led_matrix_indicators_kb(void) {} |
|
|
|
|
|
|
|
|
|
__attribute__((weak)) |
|
|
|
|
void led_matrix_indicators_user(void) {} |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
// void led_matrix_set_indicator_index(uint8_t *index, uint8_t row, uint8_t column)
|
|
|
|
|
// {
|
|
|
|
|
// if (row >= MATRIX_ROWS)
|
|
|
|
|
// {
|
|
|
|
|
// // Special value, 255=none, 254=all
|
|
|
|
|
// *index = row;
|
|
|
|
|
// }
|
|
|
|
|
// else
|
|
|
|
|
// {
|
|
|
|
|
// // This needs updated to something like
|
|
|
|
|
// // uint8_t led[8], led_count;
|
|
|
|
|
// // map_row_column_to_led(row,column,led,&led_count);
|
|
|
|
|
// // for(uint8_t i = 0; i < led_count; i++)
|
|
|
|
|
// map_row_column_to_led(row, column, index);
|
|
|
|
|
// }
|
|
|
|
|
// }
|
|
|
|
|
|
|
|
|
|
void led_matrix_init(void) { |
|
|
|
|
led_matrix_driver.init(); |
|
|
|
|
void rgb7seg_init(void) { |
|
|
|
|
#ifdef IS31FL3235A_DRIVER_ADDR_1 |
|
|
|
|
IS31FL3235A_init(IS31FL3235A_DRIVER_ADDR_1); |
|
|
|
|
#endif |
|
|
|
|
#ifdef IS31FL3235A_DRIVER_ADDR_2 |
|
|
|
|
IS31FL3235A_init(IS31FL3235A_DRIVER_ADDR_2); |
|
|
|
|
#endif |
|
|
|
|
#ifdef IS31FL3235A_DRIVER_ADDR_3 |
|
|
|
|
IS31FL3235A_init(IS31FL3235A_DRIVER_ADDR_3); |
|
|
|
|
#endif |
|
|
|
|
#ifdef IS31FL3235A_DRIVER_ADDR_4 |
|
|
|
|
IS31FL3235A_init(IS31FL3235A_DRIVER_ADDR_4); |
|
|
|
|
#endif |
|
|
|
|
|
|
|
|
|
// Wait half a second for the driver to finish initializing
|
|
|
|
|
wait_ms(500); |
|
|
|
|
|
|
|
|
|
// clear the key hits
|
|
|
|
|
for (int led=0; led<LED_DRIVER_LED_COUNT; led++) { |
|
|
|
|
g_key_hit[led] = 255; |
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
if (!eeconfig_is_enabled()) { |
|
|
|
|
dprintf("led_matrix_init_drivers eeconfig is not enabled.\n"); |
|
|
|
|
eeconfig_init(); |
|
|
|
|
eeconfig_update_led_matrix_default(); |
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
led_matrix_config.raw = eeconfig_read_led_matrix(); |
|
|
|
|
|
|
|
|
|
if (!led_matrix_config.mode) { |
|
|
|
|
dprintf("led_matrix_init_drivers led_matrix_config.mode = 0. Write default values to EEPROM.\n"); |
|
|
|
|
eeconfig_update_led_matrix_default(); |
|
|
|
|
led_matrix_config.raw = eeconfig_read_led_matrix(); |
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
eeconfig_debug_led_matrix(); // display current eeprom values
|
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
// Deals with the messy details of incrementing an integer
|
|
|
|
|
static uint8_t increment(uint8_t value, uint8_t step, uint8_t min, uint8_t max) { |
|
|
|
|
int16_t new_value = value; |
|
|
|
|
new_value += step; |
|
|
|
|
return MIN(MAX(new_value, min), max); |
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
static uint8_t decrement(uint8_t value, uint8_t step, uint8_t min, uint8_t max) { |
|
|
|
|
int16_t new_value = value; |
|
|
|
|
new_value -= step; |
|
|
|
|
return MIN(MAX(new_value, min), max); |
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
// void *backlight_get_custom_key_value_eeprom_address(uint8_t led) {
|
|
|
|
|
// // 3 bytes per value
|
|
|
|
|
// return EECONFIG_LED_MATRIX + (led * 3);
|
|
|
|
|
// }
|
|
|
|
|
|
|
|
|
|
// void backlight_get_key_value(uint8_t led, uint8_t *value) {
|
|
|
|
|
// void *address = backlight_get_custom_key_value_eeprom_address(led);
|
|
|
|
|
// value = eeprom_read_byte(address);
|
|
|
|
|
// }
|
|
|
|
|
|
|
|
|
|
// void backlight_set_key_value(uint8_t row, uint8_t column, uint8_t value) {
|
|
|
|
|
// uint8_t led[8], led_count;
|
|
|
|
|
// map_row_column_to_led(row,column,led,&led_count);
|
|
|
|
|
// for(uint8_t i = 0; i < led_count; i++) {
|
|
|
|
|
// if (led[i] < LED_DRIVER_LED_COUNT) {
|
|
|
|
|
// void *address = backlight_get_custom_key_value_eeprom_address(led[i]);
|
|
|
|
|
// eeprom_update_byte(address, value);
|
|
|
|
|
// }
|
|
|
|
|
// }
|
|
|
|
|
// }
|
|
|
|
|
|
|
|
|
|
uint32_t led_matrix_get_tick(void) { |
|
|
|
|
return g_tick; |
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
void led_matrix_toggle(void) { |
|
|
|
|
led_matrix_config.enable ^= 1; |
|
|
|
|
eeconfig_update_led_matrix(led_matrix_config.raw); |
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
void led_matrix_enable(void) { |
|
|
|
|
led_matrix_config.enable = 1; |
|
|
|
|
eeconfig_update_led_matrix(led_matrix_config.raw); |
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
void led_matrix_enable_noeeprom(void) { |
|
|
|
|
led_matrix_config.enable = 1; |
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
void led_matrix_disable(void) { |
|
|
|
|
led_matrix_config.enable = 0; |
|
|
|
|
eeconfig_update_led_matrix(led_matrix_config.raw); |
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
void led_matrix_disable_noeeprom(void) { |
|
|
|
|
led_matrix_config.enable = 0; |
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
void led_matrix_step(void) { |
|
|
|
|
led_matrix_config.mode++; |
|
|
|
|
if (led_matrix_config.mode >= LED_MATRIX_EFFECT_MAX) { |
|
|
|
|
led_matrix_config.mode = 1; |
|
|
|
|
} |
|
|
|
|
eeconfig_update_led_matrix(led_matrix_config.raw); |
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
void led_matrix_step_reverse(void) { |
|
|
|
|
led_matrix_config.mode--; |
|
|
|
|
if (led_matrix_config.mode < 1) { |
|
|
|
|
led_matrix_config.mode = LED_MATRIX_EFFECT_MAX - 1; |
|
|
|
|
} |
|
|
|
|
eeconfig_update_led_matrix(led_matrix_config.raw); |
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
void led_matrix_increase_val(void) { |
|
|
|
|
led_matrix_config.val = increment(led_matrix_config.val, 8, 0, LED_MATRIX_MAXIMUM_BRIGHTNESS); |
|
|
|
|
eeconfig_update_led_matrix(led_matrix_config.raw); |
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
void led_matrix_decrease_val(void) { |
|
|
|
|
led_matrix_config.val = decrement(led_matrix_config.val, 8, 0, LED_MATRIX_MAXIMUM_BRIGHTNESS); |
|
|
|
|
eeconfig_update_led_matrix(led_matrix_config.raw); |
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
void led_matrix_increase_speed(void) { |
|
|
|
|
led_matrix_config.speed = increment(led_matrix_config.speed, 1, 0, 3); |
|
|
|
|
eeconfig_update_led_matrix(led_matrix_config.raw);//EECONFIG needs to be increased to support this
|
|
|
|
|
uint32_t rgb7seg_get_tick(void) { |
|
|
|
|
return g7_tick; |
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
void led_matrix_decrease_speed(void) { |
|
|
|
|
led_matrix_config.speed = decrement(led_matrix_config.speed, 1, 0, 3); |
|
|
|
|
eeconfig_update_led_matrix(led_matrix_config.raw);//EECONFIG needs to be increased to support this
|
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
void led_matrix_mode(uint8_t mode, bool eeprom_write) { |
|
|
|
|
led_matrix_config.mode = mode; |
|
|
|
|
if (eeprom_write) { |
|
|
|
|
eeconfig_update_led_matrix(led_matrix_config.raw); |
|
|
|
|
} |
|
|
|
|
void rgb7seg_toggle(void) { |
|
|
|
|
rgb7seg_enabled ^= 1; |
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
uint8_t led_matrix_get_mode(void) { |
|
|
|
|
return led_matrix_config.mode; |
|
|
|
|
void rgb7seg_enable(void) { |
|
|
|
|
rgb7seg_enabled = 1; |
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
void led_matrix_set_value_noeeprom(uint8_t val) { |
|
|
|
|
led_matrix_config.val = val; |
|
|
|
|
void rgb7seg_disable(void) { |
|
|
|
|
rgb7seg_enabled = 0; |
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
void led_matrix_set_value(uint8_t val) { |
|
|
|
|
led_matrix_set_value_noeeprom(val); |
|
|
|
|
eeconfig_update_led_matrix(led_matrix_config.raw); |
|
|
|
|
void rgb7seg_increase_val(void) { |
|
|
|
|
// FIXME: Implement
|
|
|
|
|
} |
|
|
|
|
|
|
|
|
|
void backlight_set(uint8_t val) { |
|
|
|
|
led_matrix_set_value(val); |
|
|
|
|
void rgb7seg_decrease_val(void) { |
|
|
|
|
// FIXME: Implement
|
|
|
|
|
} |
|
|
|
|
|
skullY
6 years ago