Merge branch 'master' of https://github.com/jackhumbert/qmk_firmware
Christopher Browne
9 years ago
commit
f4fbfe6e54
@ -1 +1,17 @@ |
||||
#include "rev1.h" |
||||
|
||||
void led_init_ports() { |
||||
// * Set our LED pins as output
|
||||
DDRF |= (1<<0); |
||||
} |
||||
|
||||
void led_set_kb(uint8_t usb_led) { |
||||
DDRF |= (1<<0); |
||||
if (usb_led & (1<<USB_LED_CAPS_LOCK)) { |
||||
// Turn capslock on
|
||||
PORTF |= (1<<0); |
||||
} else { |
||||
// Turn capslock off
|
||||
PORTF &= ~(1<<0); |
||||
} |
||||
} |
||||
|
||||
@ -0,0 +1,112 @@ |
||||
#----------------------------------------------------------------------------
|
||||
# On command line:
|
||||
#
|
||||
# make all = Make software.
|
||||
#
|
||||
# make clean = Clean out built project files.
|
||||
#
|
||||
# make coff = Convert ELF to AVR COFF.
|
||||
#
|
||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
||||
#
|
||||
# make program = Download the hex file to the device.
|
||||
# Please customize your programmer settings(PROGRAM_CMD)
|
||||
#
|
||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
||||
# (must have teensy_loader_cli installed).
|
||||
#
|
||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
||||
# have dfu-programmer installed).
|
||||
#
|
||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
||||
# have Atmel FLIP installed).
|
||||
#
|
||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
||||
# (must have dfu-programmer installed).
|
||||
#
|
||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
||||
# (must have Atmel FLIP installed).
|
||||
#
|
||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
||||
# with avr-gdb or avr-insight as the front end for debugging.
|
||||
#
|
||||
# make filename.s = Just compile filename.c into the assembler code only.
|
||||
#
|
||||
# make filename.i = Create a preprocessed source file for use in submitting
|
||||
# bug reports to the GCC project.
|
||||
#
|
||||
# To rebuild project do "make clean" then "make all".
|
||||
#----------------------------------------------------------------------------
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
# CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
# COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
|
||||
# MIDI_ENABLE ?= YES # MIDI controls
|
||||
# UNICODE_ENABLE ?= YES # Unicode
|
||||
# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE ?= yes # Enable RGB Underglow
|
||||
|
||||
ifndef QUANTUM_DIR |
||||
include ../../../../Makefile
|
||||
endif |
||||
|
||||
|
After Width: | Height: | Size: 1015 KiB |
@ -0,0 +1,190 @@ |
||||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com> |
||||
|
||||
This program is free software: you can redistribute it and/or modify |
||||
it under the terms of the GNU General Public License as published by |
||||
the Free Software Foundation, either version 2 of the License, or |
||||
(at your option) any later version. |
||||
|
||||
This program is distributed in the hope that it will be useful, |
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||
GNU General Public License for more details. |
||||
|
||||
You should have received a copy of the GNU General Public License |
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/ |
||||
|
||||
#ifndef CONFIG_H |
||||
#define CONFIG_H |
||||
|
||||
#include "config_common.h" |
||||
|
||||
/* USB Device descriptor parameter */ |
||||
#define VENDOR_ID 0xFEED |
||||
#define PRODUCT_ID 0x6060 |
||||
#define DEVICE_VER 0x0001 |
||||
#define MANUFACTURER geekhack |
||||
#define PRODUCT GH60 |
||||
#define DESCRIPTION t.m.k. keyboard firmware for GH60 |
||||
|
||||
/* key matrix size */ |
||||
#define MATRIX_ROWS 5 |
||||
#define MATRIX_COLS 14 |
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments |
||||
* |
||||
* Change this to how you wired your keyboard |
||||
* COLS: AVR pins used for columns, left to right |
||||
* ROWS: AVR pins used for rows, top to bottom |
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) |
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) |
||||
* |
||||
*/ |
||||
#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } |
||||
// Rev A
|
||||
// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 }
|
||||
// Rev B/C
|
||||
#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 } |
||||
#define UNUSED_PINS |
||||
|
||||
/* COL2ROW or ROW2COL */ |
||||
#define DIODE_DIRECTION COL2ROW |
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ |
||||
#define DEBOUNCING_DELAY 5 |
||||
|
||||
/* define if matrix has ghost (lacks anti-ghosting diodes) */ |
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* number of backlight levels */ |
||||
#define BACKLIGHT_LEVELS 3 |
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ |
||||
#define LOCKING_SUPPORT_ENABLE |
||||
/* Locking resynchronize hack */ |
||||
#define LOCKING_RESYNC_ENABLE |
||||
|
||||
/*
|
||||
* Force NKRO |
||||
* |
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved |
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the |
||||
* makefile for this to work.) |
||||
* |
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) |
||||
* until the next keyboard reset. |
||||
* |
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is |
||||
* fully operational during normal computer usage. |
||||
* |
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) |
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by |
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a |
||||
* power-up. |
||||
* |
||||
*/ |
||||
//#define FORCE_NKRO
|
||||
|
||||
/*
|
||||
* Magic Key Options |
||||
* |
||||
* Magic keys are hotkey commands that allow control over firmware functions of |
||||
* the keyboard. They are best used in combination with the HID Listen program, |
||||
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
||||
* |
||||
* The options below allow the magic key functionality to be changed. This is |
||||
* useful if your keyboard/keypad is missing keys and you want magic key support. |
||||
* |
||||
*/ |
||||
|
||||
/* key combination for magic key command */ |
||||
#define IS_COMMAND() ( \ |
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
) |
||||
|
||||
/* control how magic key switches layers */ |
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
||||
|
||||
/* override magic key keymap */ |
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
||||
//#define MAGIC_KEY_HELP1 H
|
||||
//#define MAGIC_KEY_HELP2 SLASH
|
||||
//#define MAGIC_KEY_DEBUG D
|
||||
//#define MAGIC_KEY_DEBUG_MATRIX X
|
||||
//#define MAGIC_KEY_DEBUG_KBD K
|
||||
//#define MAGIC_KEY_DEBUG_MOUSE M
|
||||
//#define MAGIC_KEY_VERSION V
|
||||
//#define MAGIC_KEY_STATUS S
|
||||
//#define MAGIC_KEY_CONSOLE C
|
||||
//#define MAGIC_KEY_LAYER0_ALT1 ESC
|
||||
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
|
||||
//#define MAGIC_KEY_LAYER0 0
|
||||
//#define MAGIC_KEY_LAYER1 1
|
||||
//#define MAGIC_KEY_LAYER2 2
|
||||
//#define MAGIC_KEY_LAYER3 3
|
||||
//#define MAGIC_KEY_LAYER4 4
|
||||
//#define MAGIC_KEY_LAYER5 5
|
||||
//#define MAGIC_KEY_LAYER6 6
|
||||
//#define MAGIC_KEY_LAYER7 7
|
||||
//#define MAGIC_KEY_LAYER8 8
|
||||
//#define MAGIC_KEY_LAYER9 9
|
||||
//#define MAGIC_KEY_BOOTLOADER PAUSE
|
||||
//#define MAGIC_KEY_LOCK CAPS
|
||||
//#define MAGIC_KEY_EEPROM E
|
||||
//#define MAGIC_KEY_NKRO N
|
||||
//#define MAGIC_KEY_SLEEP_LED Z
|
||||
|
||||
/*
|
||||
* Feature disable options |
||||
* These options are also useful to firmware size reduction. |
||||
*/ |
||||
|
||||
/* disable debug print */ |
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */ |
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */ |
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
/*
|
||||
* RGB Underglow |
||||
* These settings are for the F4 by default: |
||||
*
|
||||
* |
||||
* #define ws2812_PORTREG PORTF |
||||
* #define ws2812_DDRREG DDRF |
||||
* #define ws2812_pin PF4 |
||||
* #define RGBLED_NUM 14 // Number of LEDs
|
||||
* #define RGBLIGHT_HUE_STEP 10 |
||||
* #define RGBLIGHT_SAT_STEP 17 |
||||
* #define RGBLIGHT_VAL_STEP 17 |
||||
* |
||||
* The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects.
|
||||
* To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations.
|
||||
* For details, please check this keymap. keyboard/planck/keymaps/yang/keymap.c |
||||
*/ |
||||
|
||||
/* Deprecated code below
|
||||
#define ws2812_PORTREG PORTF |
||||
#define ws2812_DDRREG DDRF |
||||
#define ws2812_pin PF4 |
||||
*/
|
||||
#define RGB_DI_PIN F4 |
||||
#define RGBLIGHT_TIMER |
||||
#define RGBLED_NUM 8 // Number of LEDs
|
||||
#define RGBLIGHT_HUE_STEP 8 |
||||
#define RGBLIGHT_SAT_STEP 8 |
||||
#define RGBLIGHT_VAL_STEP 8 |
||||
#endif |
||||
@ -0,0 +1,226 @@ |
||||
#include "gh60.h" |
||||
#include "action_layer.h" |
||||
|
||||
#define _BL 0 |
||||
#define _AL 1 |
||||
#define _FL 2 |
||||
#define _UL 3 |
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { |
||||
/*
|
||||
* Base layer, pretty standard ANSI layout.
|
||||
* ,-----------------------------------------------------------. |
||||
* |FN12| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | |
||||
* |-----------------------------------------------------------| |
||||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |
||||
* |-----------------------------------------------------------| |
||||
* |Caps/Fn| A| S| D| F| G| H| J| K| L| ;| '|Return | |
||||
* |-----------------------------------------------------------| |
||||
* |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | |
||||
* |-----------------------------------------------------------| |
||||
* |Ctrl|Gui |Alt | Space |Alt |Fn |Menu|Ctrl| |
||||
* `-----------------------------------------------------------' |
||||
*/ |
||||
[_BL] = KEYMAP( |
||||
FN12,1,2,3,4,5,6,7,8,9,0,MINS,EQL,BSPC, \
|
||||
TAB,Q,W,E,R,T,Y,U,I,O,P,LBRC,RBRC,BSLS, \
|
||||
FN2,A,S,D,F,G,H,J,K,L,SCLN,QUOT,NO,ENT, \
|
||||
LSFT,NO,Z,X,C,V,B,N,M,COMM,DOT,SLSH,NO,RSFT, \
|
||||
LCTL,LGUI,LALT, SPC, NO,RALT,FN0,APP, RCTL), |
||||
|
||||
/*
|
||||
* Locking arrow keys to WASD for when you need dedicated arrow keys |
||||
* ,-----------------------------------------------------------. |
||||
* | | | | | | | | | | | | | | | |
||||
* |-----------------------------------------------------------| |
||||
* | | |Up | | | | | | | | | | | | |
||||
* |-----------------------------------------------------------| |
||||
* | |Left|Down|Rght| | | | | | | | | | |
||||
* |-----------------------------------------------------------| |
||||
* | | | | | | | | | | | | | |
||||
* |-----------------------------------------------------------| |
||||
* | | | | | | | | | |
||||
* `-----------------------------------------------------------' |
||||
*/ |
||||
[_AL] = KEYMAP( |
||||
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \
|
||||
TRNS,TRNS,UP,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \
|
||||
TRNS,LEFT,DOWN,RGHT,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \
|
||||
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \
|
||||
TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,TRNS), |
||||
|
||||
|
||||
/*
|
||||
* Primary function layer, mostly the same as the traditional Pok3r layout. |
||||
* ,-------------------------------------------------------------. |
||||
* |`~ | F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12|DEL | |
||||
* |-------------------------------------------------------------| |
||||
* | |_AL| | | | |Calc|PgUp|Up|PgDn|Ptscn|Srlck|Pause| | |
||||
* |-------------------------------------------------------------| |
||||
* | | | | | | |Home|Left|Down|Rght|Ins| | | |
||||
* |-------------------------------------------------------------| |
||||
* | |_UL| | | | | | | | | | | |
||||
* |-------------------------------------------------------------| |
||||
* | | | | | | | | | |
||||
* `-------------------------------------------------------------' |
||||
*/ |
||||
[_FL] = KEYMAP( |
||||
GRAVE,F1,F2,F3,F4,F5,F6,F7,F8,F9,F10,F11,F12, DELETE, \
|
||||
TRNS,FN1,TRNS,TRNS,TRNS,TRNS,CALC,PGUP,UP,PGDN,PSCR,SLCK,PAUS,TRNS, \
|
||||
TRNS,MUTE,_VOLDOWN,_VOLUP,TRNS,TRNS,HOME,LEFT,DOWN,RGHT,INS,TRNS,TRNS,TRNS, \
|
||||
TRNS,TRNS,FN3,TRNS,TRNS,TRNS,TRNS,END,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \
|
||||
TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,TRNS), |
||||
|
||||
/*
|
||||
* Locking layer for controlling the underglow. |
||||
*
|
||||
* ,-----------------------------------------------------------. |
||||
* | | | | | | | | | | | | | | | |
||||
* |-----------------------------------------------------------| |
||||
* | | | | | | | | | | | | | | | |
||||
* |-----------------------------------------------------------| |
||||
* | |On|Mode| | | | | | | | | | | |
||||
* |-----------------------------------------------------------| |
||||
* | | |Hue+|Hue-|Sat+|Sat-|Val+|Val-| | | | | |
||||
* |-----------------------------------------------------------| |
||||
* | | | | | | | | | |
||||
* `-----------------------------------------------------------' |
||||
*/ |
||||
[_UL] = KEYMAP( |
||||
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \
|
||||
TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \
|
||||
TRNS,FN4,FN5,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, \
|
||||
TRNS,TRNS,TRNS,FN6,FN7,FN8,FN9,FN10,FN11,TRNS,TRNS,TRNS,TRNS,TRNS, \
|
||||
TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,TRNS), |
||||
}; |
||||
|
||||
enum function_id { |
||||
RGBLED_TOGGLE, |
||||
RGBLED_STEP_MODE, |
||||
RGBLED_INCREASE_HUE, |
||||
RGBLED_DECREASE_HUE, |
||||
RGBLED_INCREASE_SAT, |
||||
RGBLED_DECREASE_SAT, |
||||
RGBLED_INCREASE_VAL, |
||||
RGBLED_DECREASE_VAL, |
||||
SHIFT_ESC, |
||||
}; |
||||
|
||||
const uint16_t PROGMEM fn_actions[] = { |
||||
[0] = ACTION_LAYER_MOMENTARY(2), // Momentary Fn overlay
|
||||
[1] = ACTION_LAYER_TOGGLE(1), // Toggle Arrow Layer overlay
|
||||
[2] = ACTION_LAYER_TAP_KEY(2, KC_CAPS), // Tap to toggle caps lock and hold to activate function layer
|
||||
[3] = ACTION_LAYER_TOGGLE(3), // Toggle Underglow Layer overlay
|
||||
[4] = ACTION_FUNCTION(RGBLED_TOGGLE), //Turn on/off underglow
|
||||
[5] = ACTION_FUNCTION(RGBLED_STEP_MODE), // Change underglow mode
|
||||
[6] = ACTION_FUNCTION(RGBLED_INCREASE_HUE), |
||||
[7] = ACTION_FUNCTION(RGBLED_DECREASE_HUE), |
||||
[8] = ACTION_FUNCTION(RGBLED_INCREASE_SAT), |
||||
[9] = ACTION_FUNCTION(RGBLED_DECREASE_SAT), |
||||
[10] = ACTION_FUNCTION(RGBLED_INCREASE_VAL), |
||||
[11] = ACTION_FUNCTION(RGBLED_DECREASE_VAL), |
||||
[12] = ACTION_FUNCTION(SHIFT_ESC), |
||||
}; |
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) |
||||
{ |
||||
// MACRODOWN only works in this function
|
||||
switch(id) { |
||||
case 0: |
||||
if (record->event.pressed) { |
||||
register_code(KC_RSFT); |
||||
} else { |
||||
unregister_code(KC_RSFT); |
||||
} |
||||
break; |
||||
} |
||||
return MACRO_NONE; |
||||
}; |
||||
|
||||
void matrix_scan_user(void) { |
||||
|
||||
// Layer LED indicators
|
||||
// ESC led on when in function layer, WASD cluster leds enabled when on arrow cluster
|
||||
uint32_t layer = layer_state; |
||||
if (layer & (1<<1)) { |
||||
gh60_wasd_leds_on(); |
||||
} else { |
||||
gh60_wasd_leds_off(); |
||||
} |
||||
|
||||
if (layer & (1<<2)) { |
||||
gh60_esc_led_on(); |
||||
} else { |
||||
gh60_esc_led_off(); |
||||
} |
||||
}; |
||||
|
||||
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) |
||||
|
||||
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { |
||||
switch (id) { |
||||
case RGBLED_TOGGLE: |
||||
//led operations
|
||||
if (record->event.pressed) { |
||||
rgblight_toggle(); |
||||
} |
||||
break; |
||||
case RGBLED_INCREASE_HUE: |
||||
if (record->event.pressed) { |
||||
rgblight_increase_hue(); |
||||
} |
||||
break; |
||||
case RGBLED_DECREASE_HUE: |
||||
if (record->event.pressed) { |
||||
rgblight_decrease_hue(); |
||||
} |
||||
break; |
||||
case RGBLED_INCREASE_SAT: |
||||
if (record->event.pressed) { |
||||
rgblight_increase_sat(); |
||||
} |
||||
break; |
||||
case RGBLED_DECREASE_SAT: |
||||
if (record->event.pressed) { |
||||
rgblight_decrease_sat(); |
||||
} |
||||
break; |
||||
case RGBLED_INCREASE_VAL: |
||||
if (record->event.pressed) { |
||||
rgblight_increase_val(); |
||||
} |
||||
break; |
||||
case RGBLED_DECREASE_VAL: |
||||
if (record->event.pressed) { |
||||
rgblight_decrease_val(); |
||||
} |
||||
break; |
||||
case RGBLED_STEP_MODE: |
||||
if (record->event.pressed) { |
||||
rgblight_step(); |
||||
} |
||||
break; |
||||
static uint8_t shift_esc_shift_mask; |
||||
// Shift + ESC = ~
|
||||
case SHIFT_ESC: |
||||
shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; |
||||
if (record->event.pressed) { |
||||
if (shift_esc_shift_mask) { |
||||
add_key(KC_GRV); |
||||
send_keyboard_report(); |
||||
} else { |
||||
add_key(KC_ESC); |
||||
send_keyboard_report(); |
||||
} |
||||
} else { |
||||
if (shift_esc_shift_mask) { |
||||
del_key(KC_GRV); |
||||
send_keyboard_report(); |
||||
} else { |
||||
del_key(KC_ESC); |
||||
send_keyboard_report(); |
||||
} |
||||
} |
||||
break; |
||||
} |
||||
}; |
||||
@ -0,0 +1,16 @@ |
||||
robotmaxtron's GH60 Layout |
||||
===================== |
||||
|
||||
##Quantum MK Firmware |
||||
For the full Quantum feature list, see the parent readme.md. |
||||
|
||||
* Standard ANSI layout with Pok3r styled function layers |
||||
* ESC key led enables when on function layer |
||||
* Lockable layer with arrow keys on WASD with backlighting to indicate locked on arrow layer |
||||
* Neopixel/WS2812 RGB Underglow Support |
||||
|
||||
## Reference Images |
||||
![Wiring Refererence] (WS2812-wiring.jpg) |
||||
|
||||
### Additional Credits |
||||
Keymap has been based on various keymaps available from the QMK Repo for the GH60-SATAN and KC60 keyboards. |
||||
@ -0,0 +1 @@ |
||||
HHKB_JP=yes
|
||||
@ -0,0 +1,58 @@ |
||||
#include "hhkb.h" |
||||
|
||||
#define _______ KC_TRNS |
||||
|
||||
|
||||
/* Layer 0: HHKB JP
|
||||
* ,-----------------------------------------------------------. |
||||
* |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 10| -| =|Yen|Bsp| |
||||
* |-----------------------------------------------------------| |
||||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | |
||||
* |------------------------------------------------------` Ent| |
||||
* |Ctrl | A| S| D| F| G| H| J| K| L| ;| '| `| | |
||||
* |-----------------------------------------------------------| |
||||
* |Shft | Z| X| C| V| B| N| M| ,| .| /| \| Up|Sft| |
||||
* |-----------------------------------------------------------| |
||||
* | ||Ctl|Alt|Cmd| | Spc |Bsp| | | ||Lft|Dwn|Rgh| |
||||
* `-----------------------------------------------------------' |
||||
*/ |
||||
|
||||
/* Layer 1: HHKB mode (HHKB Fn)
|
||||
* ,-----------------------------------------------------------. |
||||
* |Pwr| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del| |
||||
* |-----------------------------------------------------------| |
||||
* |Caps | | | | | | | |Psc|Slk|Pus|Up | | | |
||||
* |------------------------------------------------------` | |
||||
* | |VoD|VoU|Mut| | | *| /|Hom|PgU|Lef|Rig| | | |
||||
* |-----------------------------------------------------------| |
||||
* | | | | | | | +| -|End|PgD|Dow| | | | |
||||
* |-----------------------------------------------------------| |
||||
* | || | | | | | | | | || | | | |
||||
* `-----------------------------------------------------------' |
||||
*/ |
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { |
||||
[0] = KEYMAP_JP( |
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_JYEN, KC_BSPC, |
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, |
||||
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, |
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_UP, KC_RSFT, |
||||
MO(1), KC_ZKHK, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC, KC_HENK, KC_KANA, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT |
||||
), |
||||
|
||||
[1] = KEYMAP_JP( |
||||
KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, |
||||
KC_CAPS, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, _______, |
||||
_______, KC_VOLD, KC_VOLU, KC_MUTE, KC_PWR, _______, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, _______, KC_PENT, |
||||
_______, _______, _______, _______, _______, _______, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, _______, _______, _______, |
||||
_______, _______, _______, _______, _______, _______ , _______, _______, _______, _______, _______, _______, _______ |
||||
) |
||||
}; |
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t macro_id, uint8_t opt) { |
||||
return MACRO_NONE; |
||||
} |
||||
|
||||
const uint16_t PROGMEM fn_actions[] = { |
||||
|
||||
}; |
||||
@ -0,0 +1 @@ |
||||
HHKB_JP=yes
|
||||
@ -0,0 +1,65 @@ |
||||
#include "hhkb.h" |
||||
|
||||
#define _______ KC_TRNS |
||||
|
||||
enum { |
||||
ZER, |
||||
HDN, |
||||
OSY |
||||
}; |
||||
|
||||
|
||||
#define CTL_ESC CTL_T(KC_ESC) |
||||
#define SFT_BSP SFT_T(KC_BSPC) |
||||
|
||||
#define SCRNS3 LGUI(LCTL(LSFT(KC_3))) |
||||
#define SCRNS4 LGUI(LCTL(LSFT(KC_4))) |
||||
|
||||
|
||||
/* hhkb jp ~ layout
|
||||
* ,-----------------------------------------------------------. |
||||
* |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 10| -| =|Yen|Bsp| |
||||
* |-----------------------------------------------------------| |
||||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | |
||||
* |------------------------------------------------------` Ent| |
||||
* |Ctrl | A| S| D| F| G| H| J| K| L| ;| '| `| | |
||||
* |-----------------------------------------------------------| |
||||
* |Shft | Z| X| C| V| B| N| M| ,| .| /| \| Up|Sft| |
||||
* |-----------------------------------------------------------| |
||||
* | ||Ctl|Alt|Cmd| | Spc |Bsp| | | ||Lft|Dwn|Rgh| |
||||
* `-----------------------------------------------------------' |
||||
*/ |
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { |
||||
[ZER] = KEYMAP_JP( |
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_INS, KC_BSPC, |
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, |
||||
CTL_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_GRV, KC_ENT, |
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS, KC_UP, KC_RSFT, |
||||
MO(HDN), KC_LCTL, KC_LALT, KC_LGUI, MO(HDN), KC_SPC, SFT_BSP, MO(HDN), MO(OSY), KC_NO, KC_LEFT, KC_DOWN, KC_RGHT |
||||
), |
||||
|
||||
[HDN] = KEYMAP_JP( |
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, |
||||
_______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, _______, |
||||
_______, KC_TILD, KC_GRV, KC_BSLS, KC_PIPE, KC_MINS, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_TILD, KC_GRV, _______, _______, |
||||
_______, KC_VOLD, KC_VOLU, KC_MUTE, KC_PWR, _______, _______, KC_ENT, _______, _______, _______, _______, KC_PGUP, _______, |
||||
_______, _______, _______, _______, _______, KC_UNDS , KC_DEL, _______, _______, _______, KC_HOME, KC_PGDN, KC_END |
||||
), |
||||
|
||||
[OSY] = KEYMAP_JP( |
||||
_______, _______, _______, SCRNS3, SCRNS4, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, |
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, |
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, |
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, |
||||
_______, _______, _______, _______, _______, _______ , _______, _______, _______, _______, _______, _______, _______ |
||||
) |
||||
}; |
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t macro_id, uint8_t opt) { |
||||
return MACRO_NONE; |
||||
} |
||||
|
||||
const uint16_t PROGMEM fn_actions[] = { |
||||
|
||||
}; |
||||
@ -0,0 +1,116 @@ |
||||
#include "satan.h" |
||||
|
||||
// Used for SHIFT_ESC
|
||||
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) |
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
#define _BL 0 |
||||
#define _FL 1 |
||||
#define _RL 2 |
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { |
||||
/* Keymap _BL: (Base Layer) Default Layer
|
||||
* ,-----------------------------------------------------------. |
||||
* |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | |
||||
* |-----------------------------------------------------------| |
||||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ | |
||||
* |-----------------------------------------------------------| |
||||
* |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return | |
||||
* |-----------------------------------------------------------| |
||||
* |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | |
||||
* |-----------------------------------------------------------| |
||||
* |Ctrl|Gui |Alt | Space |Alt |Gui |FN |Ctrl | |
||||
* `-----------------------------------------------------------' |
||||
*/ |
||||
[_BL] = KEYMAP( |
||||
F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, \
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, \
|
||||
KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, KC_RALT, MO(_RL), MO(_FL), KC_RCTL), |
||||
|
||||
/* Keymap _FL: Function Layer
|
||||
* ,-----------------------------------------------------------. |
||||
* | ~ | F1|F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12| DEL | |
||||
* |-----------------------------------------------------------| |
||||
* | | Up| | | | |Cal| |Ins| |PrSc|Sclk|Paus| | |
||||
* |-----------------------------------------------------------| |
||||
* | |Left|Down|Rig| | | | | | |Home|PgUp| | |
||||
* |-----------------------------------------------------------| |
||||
* | | |App| | | |Vdn|Vup|Mute|End|PgDn| | |
||||
* |-----------------------------------------------------------| |
||||
* | | | | | | | | | |
||||
* `-----------------------------------------------------------' |
||||
*/ |
||||
[_FL] = KEYMAP( |
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \
|
||||
KC_TRNS,KC_TRNS, KC_UP, KC_TRNS,KC_TRNS,KC_TRNS, KC_CALC,KC_TRNS,KC_INS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, \
|
||||
KC_TRNS,KC_LEFT,KC_DOWN,KC_RGHT,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS, KC_APP, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_END, KC_PGDN, KC_TRNS, \
|
||||
KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), |
||||
|
||||
/* Keymap _RL: Function Layer
|
||||
* ,-----------------------------------------------------------. |
||||
* | | | | | | | | | | | | | | RESET| |
||||
* |-----------------------------------------------------------| |
||||
* | | | | | | | | | | | |BL-|BL+|BL | |
||||
* |-----------------------------------------------------------| |
||||
* | | | | | | | | | | | | | |
||||
* |-----------------------------------------------------------| |
||||
* | | F1|F2 | F3|F4 | F5| F6| F7| F8| | | | |
||||
* |-----------------------------------------------------------| |
||||
* | | | | | | | | | |
||||
* `-----------------------------------------------------------'
|
||||
*/ |
||||
[_RL] = KEYMAP( |
||||
#ifdef RGBLIGHT_ENABLE |
||||
KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, \
|
||||
KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_INC, BL_TOGG, \
|
||||
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS, RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), |
||||
#else |
||||
KC_GRV, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, \
|
||||
KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_INC, BL_TOGG, \
|
||||
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), |
||||
#endif |
||||
}; |
||||
|
||||
enum function_id { |
||||
SHIFT_ESC, |
||||
}; |
||||
|
||||
const uint16_t PROGMEM fn_actions[] = { |
||||
[0] = ACTION_FUNCTION(SHIFT_ESC), |
||||
}; |
||||
|
||||
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { |
||||
static uint8_t shift_esc_shift_mask; |
||||
switch (id) { |
||||
case SHIFT_ESC: |
||||
shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; |
||||
if (record->event.pressed) { |
||||
if (shift_esc_shift_mask) { |
||||
add_key(KC_GRV); |
||||
send_keyboard_report(); |
||||
} else { |
||||
add_key(KC_ESC); |
||||
send_keyboard_report(); |
||||
} |
||||
} else { |
||||
if (shift_esc_shift_mask) { |
||||
del_key(KC_GRV); |
||||
send_keyboard_report(); |
||||
} else { |
||||
del_key(KC_ESC); |
||||
send_keyboard_report(); |
||||
} |
||||
} |
||||
break; |
||||
} |
||||
} |
||||
@ -0,0 +1,20 @@ |
||||
#include "../../config.h" |
||||
|
||||
// USB Device descriptor parameter
|
||||
#define VENDOR_ID 0xFEED |
||||
#define PRODUCT_ID 0x6060 |
||||
#define DEVICE_VER 0x0003 |
||||
#define MANUFACTURER Custom |
||||
#define PRODUCT GH60 rev.CHN |
||||
#define DESCRIPTION QMK keyboard firmware for GH60 with WS2812 support |
||||
|
||||
// Backlight configuration
|
||||
#define BACKLIGHT_LEVELS 3 |
||||
|
||||
// Underlight configuration
|
||||
#define RGB_DI_PIN E2 |
||||
#define RGBLIGHT_TIMER |
||||
#define RGBLED_NUM 6 // Number of LEDs
|
||||
#define RGBLIGHT_HUE_STEP 8 |
||||
#define RGBLIGHT_SAT_STEP 8 |
||||
#define RGBLIGHT_VAL_STEP 8 |
||||
@ -0,0 +1,84 @@ |
||||
#include "satan.h" |
||||
|
||||
// Used for SHIFT_ESC
|
||||
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)) |
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
#define _BL 0 |
||||
#define _FL 1 |
||||
#define _RGBL 2 |
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { |
||||
|
||||
// See base_layer.png and rgb_layer.png for layout reference
|
||||
|
||||
// Base Default Layer
|
||||
// Mac Modifier Layout. Use BootMagic to toggle GUI and ALT positions.
|
||||
[_BL] = KEYMAP_HHKB( |
||||
F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NO, \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \
|
||||
LT(_FL, KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_UP, MO(_FL), \
|
||||
KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_LEFT, KC_DOWN, KC_RGHT), |
||||
|
||||
// Function layer
|
||||
[_FL] = KEYMAP_HHKB( |
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_NO, \
|
||||
KC_NO, KC_MPRV, KC_UP, KC_MNXT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_PSCR, KC_SLCK, KC_PAUS, KC_INS, \
|
||||
KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \
|
||||
KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, LT(_RGBL, KC_PGUP), KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_TRNS, KC_HOME, KC_PGDN, KC_END), |
||||
|
||||
// RGB Layer
|
||||
[_RGBL] = KEYMAP_HHKB( |
||||
#ifdef RGBLIGHT_ENABLE |
||||
RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \
|
||||
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \
|
||||
KC_NO, BL_TOGG, BL_STEP, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \
|
||||
KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_NO, KC_NO, KC_TRNS, KC_TRNS,\
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), |
||||
#else |
||||
RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \
|
||||
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \
|
||||
KC_NO, BL_TOGG, BL_STEP, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \
|
||||
KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, KC_TRNS,\
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), |
||||
#endif |
||||
}; |
||||
|
||||
enum function_id { |
||||
SHIFT_ESC, |
||||
}; |
||||
|
||||
const uint16_t PROGMEM fn_actions[] = { |
||||
[0] = ACTION_FUNCTION(SHIFT_ESC), |
||||
}; |
||||
|
||||
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) { |
||||
static uint8_t shift_esc_shift_mask; |
||||
switch (id) { |
||||
case SHIFT_ESC: |
||||
shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK; |
||||
if (record->event.pressed) { |
||||
if (shift_esc_shift_mask) { |
||||
add_key(KC_GRV); |
||||
send_keyboard_report(); |
||||
} else { |
||||
add_key(KC_ESC); |
||||
send_keyboard_report(); |
||||
} |
||||
} else { |
||||
if (shift_esc_shift_mask) { |
||||
del_key(KC_GRV); |
||||
send_keyboard_report(); |
||||
} else { |
||||
del_key(KC_ESC); |
||||
send_keyboard_report(); |
||||
} |
||||
} |
||||
break; |
||||
} |
||||
} |
||||
Loading…
Reference in new issue