[Keyboard] Add Budget96 by Donut Cables (#5550)
* initial commit of budget96 * non logic changes * add my name to readme * update matrix.c * make the matrix representation of the layout macro * fix up LAYOUT macro * add missing character * initial keymap commit * put KC_NO where they belong * basic keymap * fix matrix row and col definition * The diagram I was sent and the pins used I was sent were in opposite order from each other. This should fix the issues * update the readme * change up manufacturer for budget96 * update copyright date * fix up the switch matrix and provide a keymap * forgot the keymap * other matrix fixes * missing a few keys in the switch matrix * messed up the row tracing * tweak keymap a bit * use a lower case k * fix spacing for markdown rendering * put in the reset key documentation * clean up the file a little * use LAYOUT_96_ansi * add a second layer for lighting controls * add in lighting support * add QMK Configurator support * use pragma once * remove un needed matrix.c * convert to GPIO methods * turn on rgblight_enable and get rid of custom matrix * set bootloadhid_bootloader to 1 * set bootmagic to lite and set it to k50 * add reset information to readme * use i2c_master instead of custom i2c * restore the custom i2c code * introduce reset key and eep_rst in function layer 1 * fix up pip3 install commands * fix up device and manufacturer names * remove un needed comments * add an ALL layout macro along with QMK Configurator support * move budget96 into donutcables directory since he actually has different boards * add a short donut cables blurb taken from his website * update readme for make instructions to point to the new path * Update keyboards/donutcables/budget96/config.h Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com> * Update keyboards/donutcables/budget96/readme.md Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com> * Update keyboards/donutcables/budget96/info.json Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com> * turn on backlight * Update keyboards/donutcables/budget96/readme.md Co-Authored-By: mechmerlin <30334081+mechmerlin@users.noreply.github.com> * remove extra UART and BOOTLOADER settings that are not neededplanck_ez_wdg
MechMerlin
6 years ago
committed by
Drashna Jaelre
parent
852d125413
commit
f698f1e3f4
@ -0,0 +1,80 @@ |
|||||||
|
/* Copyright 2019 MechMerlin
|
||||||
|
* |
||||||
|
* This program is free software: you can redistribute it and/or modify |
||||||
|
* it under the terms of the GNU General Public License as published by |
||||||
|
* the Free Software Foundation, either version 2 of the License, or |
||||||
|
* (at your option) any later version. |
||||||
|
* |
||||||
|
* This program is distributed in the hope that it will be useful, |
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||||
|
* GNU General Public License for more details. |
||||||
|
* |
||||||
|
* You should have received a copy of the GNU General Public License |
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/ |
||||||
|
#include "budget96.h" |
||||||
|
|
||||||
|
#ifdef BACKLIGHT_ENABLE |
||||||
|
#include "backlight.h" |
||||||
|
#endif |
||||||
|
#ifdef RGBLIGHT_ENABLE |
||||||
|
#include "rgblight.h" |
||||||
|
#endif |
||||||
|
|
||||||
|
#include <avr/pgmspace.h> |
||||||
|
|
||||||
|
#include "action_layer.h" |
||||||
|
#include "i2c.h" |
||||||
|
#include "quantum.h" |
||||||
|
|
||||||
|
__attribute__ ((weak)) |
||||||
|
void matrix_scan_user(void) { |
||||||
|
} |
||||||
|
|
||||||
|
#ifdef RGBLIGHT_ENABLE |
||||||
|
extern rgblight_config_t rgblight_config; |
||||||
|
|
||||||
|
void rgblight_set(void) { |
||||||
|
if (!rgblight_config.enable) { |
||||||
|
for (uint8_t i = 0; i < RGBLED_NUM; i++) { |
||||||
|
led[i].r = 0; |
||||||
|
led[i].g = 0; |
||||||
|
led[i].b = 0; |
||||||
|
} |
||||||
|
} |
||||||
|
|
||||||
|
i2c_init(); |
||||||
|
i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM); |
||||||
|
} |
||||||
|
#endif |
||||||
|
|
||||||
|
void backlight_init_ports(void) { |
||||||
|
// initialize pins D0, D1, D4 and D6 as output
|
||||||
|
setPinOutput(D0); |
||||||
|
setPinOutput(D1); |
||||||
|
setPinOutput(D4); |
||||||
|
setPinOutput(D6); |
||||||
|
|
||||||
|
// turn RGB LEDs on
|
||||||
|
writePinHigh(D0); |
||||||
|
writePinHigh(D1); |
||||||
|
writePinHigh(D4); |
||||||
|
writePinHigh(D6); |
||||||
|
} |
||||||
|
|
||||||
|
void backlight_set(uint8_t level) { |
||||||
|
if (level == 0) { |
||||||
|
// turn RGB LEDs off
|
||||||
|
writePinLow(D0); |
||||||
|
writePinLow(D1); |
||||||
|
writePinLow(D4); |
||||||
|
writePinLow(D6); |
||||||
|
} else { |
||||||
|
// turn RGB LEDs on
|
||||||
|
writePinHigh(D0); |
||||||
|
writePinHigh(D1); |
||||||
|
writePinHigh(D4); |
||||||
|
writePinHigh(D6); |
||||||
|
} |
||||||
|
} |
||||||
@ -0,0 +1,56 @@ |
|||||||
|
/* Copyright 2019 MechMerlin
|
||||||
|
* |
||||||
|
* This program is free software: you can redistribute it and/or modify |
||||||
|
* it under the terms of the GNU General Public License as published by |
||||||
|
* the Free Software Foundation, either version 2 of the License, or |
||||||
|
* (at your option) any later version. |
||||||
|
* |
||||||
|
* This program is distributed in the hope that it will be useful, |
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||||
|
* GNU General Public License for more details. |
||||||
|
* |
||||||
|
* You should have received a copy of the GNU General Public License |
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/ |
||||||
|
#pragma once |
||||||
|
|
||||||
|
#include "quantum.h" |
||||||
|
|
||||||
|
#define LAYOUT_all( \ |
||||||
|
k50, k52, k53, k54, k55, k60, k6A, k7A, k70, k5B, k5C, k5D, k5E, k1D, k2E, k0D, k76, k79, k78, \
|
||||||
|
k40, k41, k42, k43, k44, k45, k61, k6B, k7B, k71, k4A, k4B, k4C, k4D, k4E, k46, k47, k48, k49, \
|
||||||
|
k30, k31, k32, k33, k34, k35, k62, k6C, k7C, k72, k3A, k3B, k3C, k3D, k36, k37, k38, k39, \
|
||||||
|
k20, k21, k22, k23, k24, k25, k63, k6D, k7D, k73, k2A, k2B, k2C, k2D, k26, k27, k28, k29, \
|
||||||
|
k10, k03, k11, k12, k13, k14, k15, k64, k6E, k7E, k74, k1A, k1B, k68, k16, k17, k18, k19, \
|
||||||
|
k00, k01, k02, k65, k75, k0A, k0B, k66, k67, k69, k06, k08, k09 \
|
||||||
|
) \
|
||||||
|
{ \
|
||||||
|
{ k00, k01, k02, k03, KC_NO, KC_NO, k06, KC_NO, k08, k09, k0A, k0B, KC_NO, k0D, KC_NO }, \
|
||||||
|
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, KC_NO, k1D, KC_NO }, \
|
||||||
|
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E }, \
|
||||||
|
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, KC_NO }, \
|
||||||
|
{ k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E }, \
|
||||||
|
{ k50, KC_NO, k52, k53, k54, k55, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, k5B, k5C, k5D, k5E }, \
|
||||||
|
{ k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k6A, k6B, k6C, k6D, k6E }, \
|
||||||
|
{ k70, k71, k72, k73, k74, k75, k76, KC_NO, k78, k79, k7A, k7B, k7C, k7D, k7E }, \
|
||||||
|
} |
||||||
|
|
||||||
|
#define LAYOUT_96_ansi( \ |
||||||
|
k50, k52, k53, k54, k55, k60, k6A, k7A, k70, k5B, k5C, k5D, k5E, k1D, k2E, k0D, k76, k79, k78, \
|
||||||
|
k40, k41, k42, k43, k44, k45, k61, k6B, k7B, k71, k4A, k4B, k4C, k4E, k46, k47, k48, k49, \
|
||||||
|
k30, k31, k32, k33, k34, k35, k62, k6C, k7C, k72, k3A, k3B, k3C, k3D, k36, k37, k38, k39, \
|
||||||
|
k20, k21, k22, k23, k24, k25, k63, k6D, k7D, k73, k2A, k2B, k2D, k26, k27, k28, k29, \
|
||||||
|
k10, k11, k12, k13, k14, k15, k64, k6E, k7E, k74, k1A, k1B, k68, k16, k17, k18, \
|
||||||
|
k00, k01, k02, k65, k75, k0B, k66, k67, k69, k06, k08, k09 \
|
||||||
|
) \
|
||||||
|
{ \
|
||||||
|
{ k00, k01, k02, KC_NO, KC_NO, KC_NO, k06, KC_NO, k08, k09, KC_NO, k0B, KC_NO, k0D, KC_NO }, \
|
||||||
|
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, KC_NO, k1A, k1B, KC_NO, k1D, KC_NO }, \
|
||||||
|
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, KC_NO, k2D, k2E }, \
|
||||||
|
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, KC_NO }, \
|
||||||
|
{ k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, KC_NO, k4E }, \
|
||||||
|
{ k50, KC_NO, k52, k53, k54, k55, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, k5B, k5C, k5D, k5E }, \
|
||||||
|
{ k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k6A, k6B, k6C, k6D, k6E }, \
|
||||||
|
{ k70, k71, k72, k73, k74, k75, k76, KC_NO, k78, k79, k7A, k7B, k7C, k7D, k7E }, \
|
||||||
|
} |
||||||
@ -0,0 +1,47 @@ |
|||||||
|
/*
|
||||||
|
Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com> |
||||||
|
|
||||||
|
This program is free software: you can redistribute it and/or modify |
||||||
|
it under the terms of the GNU General Public License as published by |
||||||
|
the Free Software Foundation, either version 2 of the License, or |
||||||
|
(at your option) any later version. |
||||||
|
|
||||||
|
This program is distributed in the hope that it will be useful, |
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||||
|
GNU General Public License for more details. |
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License |
||||||
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/ |
||||||
|
|
||||||
|
#pragma once |
||||||
|
|
||||||
|
#include "config_common.h" |
||||||
|
|
||||||
|
#define VENDOR_ID 0x20A0 |
||||||
|
#define PRODUCT_ID 0x422D |
||||||
|
#define MANUFACTURER DonutCables |
||||||
|
#define PRODUCT budget96 |
||||||
|
|
||||||
|
#define RGBLED_NUM 16 |
||||||
|
|
||||||
|
#define MATRIX_ROWS 8 |
||||||
|
#define MATRIX_COLS 15 |
||||||
|
|
||||||
|
#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, D7 } |
||||||
|
#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6, B7 } |
||||||
|
#define UNUSED_PINS |
||||||
|
|
||||||
|
#define DIODE_DIRECTION COL2ROW |
||||||
|
#define DEBOUNCING_DELAY 5 |
||||||
|
|
||||||
|
#define NO_BACKLIGHT_CLOCK |
||||||
|
#define BACKLIGHT_LEVELS 1 |
||||||
|
#define RGBLIGHT_ANIMATIONS |
||||||
|
|
||||||
|
// Set bootmagic lite key to the key commonly programmed as Esc.
|
||||||
|
#define BOOTMAGIC_LITE_ROW 5 |
||||||
|
#define BOOTMAGIC_LITE_COLUMN 0 |
||||||
|
|
||||||
|
/* key combination for command */ |
||||||
@ -0,0 +1,106 @@ |
|||||||
|
/*
|
||||||
|
Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com> |
||||||
|
|
||||||
|
This program is free software: you can redistribute it and/or modify |
||||||
|
it under the terms of the GNU General Public License as published by |
||||||
|
the Free Software Foundation, either version 2 of the License, or |
||||||
|
(at your option) any later version. |
||||||
|
|
||||||
|
This program is distributed in the hope that it will be useful, |
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||||
|
GNU General Public License for more details. |
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License |
||||||
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/ |
||||||
|
|
||||||
|
// Please do not modify this file
|
||||||
|
|
||||||
|
#include <avr/io.h> |
||||||
|
#include <util/twi.h> |
||||||
|
|
||||||
|
#include "i2c.h" |
||||||
|
|
||||||
|
void i2c_set_bitrate(uint16_t bitrate_khz) { |
||||||
|
uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz); |
||||||
|
if (bitrate_div >= 16) { |
||||||
|
bitrate_div = (bitrate_div - 16) / 2; |
||||||
|
} |
||||||
|
TWBR = bitrate_div; |
||||||
|
} |
||||||
|
|
||||||
|
void i2c_init(void) { |
||||||
|
// set pull-up resistors on I2C bus pins
|
||||||
|
PORTC |= 0b11; |
||||||
|
|
||||||
|
i2c_set_bitrate(400); |
||||||
|
|
||||||
|
// enable TWI (two-wire interface)
|
||||||
|
TWCR |= (1 << TWEN); |
||||||
|
|
||||||
|
// enable TWI interrupt and slave address ACK
|
||||||
|
TWCR |= (1 << TWIE); |
||||||
|
TWCR |= (1 << TWEA); |
||||||
|
} |
||||||
|
|
||||||
|
uint8_t i2c_start(uint8_t address) { |
||||||
|
// reset TWI control register
|
||||||
|
TWCR = 0; |
||||||
|
|
||||||
|
// begin transmission and wait for it to end
|
||||||
|
TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN); |
||||||
|
while (!(TWCR & (1<<TWINT))); |
||||||
|
|
||||||
|
// check if the start condition was successfully transmitted
|
||||||
|
if ((TWSR & 0xF8) != TW_START) { |
||||||
|
return 1; |
||||||
|
} |
||||||
|
|
||||||
|
// transmit address and wait
|
||||||
|
TWDR = address; |
||||||
|
TWCR = (1<<TWINT) | (1<<TWEN); |
||||||
|
while (!(TWCR & (1<<TWINT))); |
||||||
|
|
||||||
|
// check if the device has acknowledged the READ / WRITE mode
|
||||||
|
uint8_t twst = TW_STATUS & 0xF8; |
||||||
|
if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) { |
||||||
|
return 1; |
||||||
|
} |
||||||
|
|
||||||
|
return 0; |
||||||
|
} |
||||||
|
|
||||||
|
void i2c_stop(void) { |
||||||
|
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO); |
||||||
|
} |
||||||
|
|
||||||
|
uint8_t i2c_write(uint8_t data) { |
||||||
|
TWDR = data; |
||||||
|
|
||||||
|
// transmit data and wait
|
||||||
|
TWCR = (1<<TWINT) | (1<<TWEN); |
||||||
|
while (!(TWCR & (1<<TWINT))); |
||||||
|
|
||||||
|
if ((TWSR & 0xF8) != TW_MT_DATA_ACK) { |
||||||
|
return 1; |
||||||
|
} |
||||||
|
|
||||||
|
return 0; |
||||||
|
} |
||||||
|
|
||||||
|
uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length) { |
||||||
|
if (i2c_start(address)) { |
||||||
|
return 1; |
||||||
|
} |
||||||
|
|
||||||
|
for (uint16_t i = 0; i < length; i++) { |
||||||
|
if (i2c_write(data[i])) { |
||||||
|
return 1; |
||||||
|
} |
||||||
|
} |
||||||
|
|
||||||
|
i2c_stop(); |
||||||
|
|
||||||
|
return 0; |
||||||
|
} |
||||||
@ -0,0 +1,24 @@ |
|||||||
|
/*
|
||||||
|
Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com> |
||||||
|
|
||||||
|
This program is free software: you can redistribute it and/or modify |
||||||
|
it under the terms of the GNU General Public License as published by |
||||||
|
the Free Software Foundation, either version 2 of the License, or |
||||||
|
(at your option) any later version. |
||||||
|
|
||||||
|
This program is distributed in the hope that it will be useful, |
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||||
|
GNU General Public License for more details. |
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License |
||||||
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/ |
||||||
|
|
||||||
|
// Please do not modify this file
|
||||||
|
|
||||||
|
#pragma once |
||||||
|
|
||||||
|
void i2c_init(void); |
||||||
|
void i2c_set_bitrate(uint16_t bitrate_khz); |
||||||
|
uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length); |
||||||
@ -0,0 +1,16 @@ |
|||||||
|
{ |
||||||
|
"keyboard_name": "budget96", |
||||||
|
"url": "", |
||||||
|
"maintainer": "qmk", |
||||||
|
"width": 19, |
||||||
|
"height": 6, |
||||||
|
"layouts": { |
||||||
|
"LAYOUT_all": { |
||||||
|
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15, "y":0}, {"x":16, "y":0}, {"x":17, "y":0}, {"x":18, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":12, "y":1}, {"x":13, "y":1}, {"x":14, "y":1}, {"x":15, "y":1}, {"x":16, "y":1}, {"x":17, "y":1}, {"x":18, "y":1}, {"x":0, "y":2, "w":1.5}, {"x":1.5, "y":2}, {"x":2.5, "y":2}, {"x":3.5, "y":2}, {"x":4.5, "y":2}, {"x":5.5, "y":2}, {"x":6.5, "y":2}, {"x":7.5, "y":2}, {"x":8.5, "y":2}, {"x":9.5, "y":2}, {"x":10.5, "y":2}, {"x":11.5, "y":2}, {"x":12.5, "y":2}, {"x":13.5, "y":2, "w":1.5}, {"x":15, "y":2}, {"x":16, "y":2}, {"x":17, "y":2}, {"x":18, "y":2}, {"x":0, "y":3, "w":1.75}, {"x":1.75, "y":3}, {"x":2.75, "y":3}, {"x":3.75, "y":3}, {"x":4.75, "y":3}, {"x":5.75, "y":3}, {"x":6.75, "y":3}, {"x":7.75, "y":3}, {"x":8.75, "y":3}, {"x":9.75, "y":3}, {"x":10.75, "y":3}, {"x":11.75, "y":3}, {"x":12.75, "y":3}, {"x":13.75, "y":3, "w":1.25}, {"x":15, "y":3}, {"x":16, "y":3}, {"x":17, "y":3}, {"x":18, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4}, {"x":2.25, "y":4}, {"x":3.25, "y":4}, {"x":4.25, "y":4}, {"x":5.25, "y":4}, {"x":6.25, "y":4}, {"x":7.25, "y":4}, {"x":8.25, "y":4}, {"x":9.25, "y":4}, {"x":10.25, "y":4}, {"x":11.25, "y":4}, {"x":12.25, "y":4, "w":1.75}, {"x":14, "y":4}, {"x":15, "y":4}, {"x":16, "y":4}, {"x":17, "y":4}, {"x":18, "y":4}, {"x":0, "y":5, "w":1.25}, {"x":1.25, "y":5, "w":1.25}, {"x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":6.25}, {"x":10, "y":5}, {"x":11, "y":5}, {"x":12, "y":5}, {"x":13, "y":5}, {"x":14, "y":5}, {"x":15, "y":5}, {"x":16, "y":5}, {"x":17, "y":5}, {"x":18, "y":5}] |
||||||
|
}, |
||||||
|
|
||||||
|
"LAYOUT_96_ansi": { |
||||||
|
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15, "y":0}, {"x":16, "y":0}, {"x":17, "y":0}, {"x":18, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":12, "y":1}, {"x":13, "y":1, "w":2}, {"x":15, "y":1}, {"x":16, "y":1}, {"x":17, "y":1}, {"x":18, "y":1}, {"x":0, "y":2, "w":1.5}, {"x":1.5, "y":2}, {"x":2.5, "y":2}, {"x":3.5, "y":2}, {"x":4.5, "y":2}, {"x":5.5, "y":2}, {"x":6.5, "y":2}, {"x":7.5, "y":2}, {"x":8.5, "y":2}, {"x":9.5, "y":2}, {"x":10.5, "y":2}, {"x":11.5, "y":2}, {"x":12.5, "y":2}, {"x":13.5, "y":2, "w":1.5}, {"x":15, "y":2}, {"x":16, "y":2}, {"x":17, "y":2}, {"x":18, "y":2}, {"x":0, "y":3, "w":1.75}, {"x":1.75, "y":3}, {"x":2.75, "y":3}, {"x":3.75, "y":3}, {"x":4.75, "y":3}, {"x":5.75, "y":3}, {"x":6.75, "y":3}, {"x":7.75, "y":3}, {"x":8.75, "y":3}, {"x":9.75, "y":3}, {"x":10.75, "y":3}, {"x":11.75, "y":3}, {"x":12.75, "y":3, "w":2.25}, {"x":15, "y":3}, {"x":16, "y":3}, {"x":17, "y":3}, {"x":18, "y":3}, {"x":0, "y":4, "w":2.25}, {"x":2.25, "y":4}, {"x":3.25, "y":4}, {"x":4.25, "y":4}, {"x":5.25, "y":4}, {"x":6.25, "y":4}, {"x":7.25, "y":4}, {"x":8.25, "y":4}, {"x":9.25, "y":4}, {"x":10.25, "y":4}, {"x":11.25, "y":4}, {"x":12.25, "y":4, "w":1.75}, {"x":14, "y":4}, {"x":15, "y":4}, {"x":16, "y":4}, {"x":17, "y":4}, {"x":0, "y":5, "w":1.25}, {"x":1.25, "y":5, "w":1.25}, {"x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":6.25}, {"x":10, "y":5, "w":1.5}, {"x":11.5, "y":5, "w":1.5}, {"x":13, "y":5}, {"x":14, "y":5}, {"x":15, "y":5}, {"x":16, "y":5}, {"x":17, "y":5}, {"x":18, "y":4, "h":2}] |
||||||
|
} |
||||||
|
} |
||||||
|
} |
||||||
@ -0,0 +1,19 @@ |
|||||||
|
/* Copyright 2018 MechMerlin
|
||||||
|
* |
||||||
|
* This program is free software: you can redistribute it and/or modify |
||||||
|
* it under the terms of the GNU General Public License as published by |
||||||
|
* the Free Software Foundation, either version 2 of the License, or |
||||||
|
* (at your option) any later version. |
||||||
|
* |
||||||
|
* This program is distributed in the hope that it will be useful, |
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||||
|
* GNU General Public License for more details. |
||||||
|
* |
||||||
|
* You should have received a copy of the GNU General Public License |
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/ |
||||||
|
|
||||||
|
#pragma once |
||||||
|
|
||||||
|
// place overrides here
|
||||||
@ -0,0 +1,35 @@ |
|||||||
|
/* Copyright 2018 MechMerlin
|
||||||
|
* |
||||||
|
* This program is free software: you can redistribute it and/or modify |
||||||
|
* it under the terms of the GNU General Public License as published by |
||||||
|
* the Free Software Foundation, either version 2 of the License, or |
||||||
|
* (at your option) any later version. |
||||||
|
* |
||||||
|
* This program is distributed in the hope that it will be useful, |
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of |
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
||||||
|
* GNU General Public License for more details. |
||||||
|
* |
||||||
|
* You should have received a copy of the GNU General Public License |
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/ |
||||||
|
#include QMK_KEYBOARD_H |
||||||
|
|
||||||
|
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { |
||||||
|
[0] = LAYOUT_96_ansi(\
|
||||||
|
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_NLCK, KC_INS, KC_HOME, KC_PGUP, KC_PSLS, \
|
||||||
|
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_END, KC_PGDN, KC_PSLS, KC_PAST, \
|
||||||
|
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PMNS, \
|
||||||
|
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, \
|
||||||
|
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, \
|
||||||
|
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RIGHT, KC_P0, KC_PDOT, KC_PENT), \
|
||||||
|
|
||||||
|
[1] = LAYOUT_96_ansi(\
|
||||||
|
RESET, EEP_RST, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||||
|
BL_TOGG, BL_STEP, BL_ON, BL_OFF, BL_INC, BL_DEC, BL_BRTG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||||
|
RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, RGB_SPI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||||
|
KC_TRNS, RGB_RMOD, RGB_HUD, RGB_SAD, RGB_VAD, RGB_SPD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||||
|
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), \
|
||||||
|
}; |
||||||
|
|
||||||
@ -0,0 +1 @@ |
|||||||
|
# The default keymap for budget96 |
||||||
@ -0,0 +1,44 @@ |
|||||||
|
# budget96 |
||||||
|
|
||||||
|
96 key atmega32a keyboard. |
||||||
|
|
||||||
|
Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) |
||||||
|
Hardware Supported: Budget96 PCB |
||||||
|
Hardware Availability: [DonutCables](https://donutcables.com/) |
||||||
|
|
||||||
|
Make example for this keyboard (after setting up your build environment): |
||||||
|
|
||||||
|
make donutcables/budget96:default |
||||||
|
|
||||||
|
Flashing |
||||||
|
|
||||||
|
**Reset Key:** Hold down the key located at `K00`, commonly programmed as left control while plugging in the keyboard. You may also hold down the key located at `K50`, commonly programmed as the `Esc` key. |
||||||
|
|
||||||
|
ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. |
||||||
|
|
||||||
|
Windows: |
||||||
|
1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). |
||||||
|
2. Place your keyboard into reset. |
||||||
|
3. Press the `Find Device` button and ensure that your keyboard is found. |
||||||
|
4. Press the `Open .hex File` button and locate the `.hex` file you created. |
||||||
|
5. Press the `Flash Device` button and wait for the process to complete. |
||||||
|
|
||||||
|
macOS: |
||||||
|
1. Install homebrew by typing the following: |
||||||
|
``` |
||||||
|
/usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" |
||||||
|
``` |
||||||
|
2. Install `crosspack-avr`. |
||||||
|
``` |
||||||
|
brew cask install crosspack-avr |
||||||
|
``` |
||||||
|
3. Install the following packages: |
||||||
|
``` |
||||||
|
brew install python |
||||||
|
pip3 install pyusb |
||||||
|
brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb |
||||||
|
|
||||||
|
4. Place your keyboard into reset. |
||||||
|
5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. |
||||||
|
|
||||||
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). |
||||||
@ -0,0 +1,49 @@ |
|||||||
|
# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
|
||||||
|
#
|
||||||
|
# This program is free software: you can redistribute it and/or modify
|
||||||
|
# it under the terms of the GNU General Public License as published by
|
||||||
|
# the Free Software Foundation, either version 2 of the License, or
|
||||||
|
# (at your option) any later version.
|
||||||
|
#
|
||||||
|
# This program is distributed in the hope that it will be useful,
|
||||||
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
# GNU General Public License for more details.
|
||||||
|
#
|
||||||
|
# You should have received a copy of the GNU General Public License
|
||||||
|
# along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
|
||||||
|
# MCU name
|
||||||
|
MCU = atmega32a
|
||||||
|
PROTOCOL = VUSB
|
||||||
|
|
||||||
|
# unsupported features for now
|
||||||
|
NO_UART = yes
|
||||||
|
NO_SUSPEND_POWER_DOWN = yes
|
||||||
|
|
||||||
|
# processor frequency
|
||||||
|
F_CPU = 12000000
|
||||||
|
|
||||||
|
# Bootloader
|
||||||
|
# This definition is optional, and if your keyboard supports multiple bootloaders of
|
||||||
|
# different sizes, comment this out, and the correct address will be loaded
|
||||||
|
# automatically (+60). See bootloader.mk for all options.
|
||||||
|
BOOTLOADER = bootloadHID
|
||||||
|
|
||||||
|
# build options
|
||||||
|
BOOTMAGIC_ENABLE = lite
|
||||||
|
MOUSEKEY_ENABLE = yes
|
||||||
|
EXTRAKEY_ENABLE = yes
|
||||||
|
CONSOLE_ENABLE = yes
|
||||||
|
COMMAND_ENABLE = yes
|
||||||
|
BACKLIGHT_ENABLE = yes
|
||||||
|
RGBLIGHT_ENABLE = yes
|
||||||
|
RGBLIGHT_CUSTOM_DRIVER = yes
|
||||||
|
|
||||||
|
OPT_DEFS = -DDEBUG_LEVEL=0
|
||||||
|
|
||||||
|
# custom matrix setup
|
||||||
|
SRC = i2c.c
|
||||||
|
|
||||||
|
# programming options
|
||||||
|
PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
|
||||||
@ -0,0 +1,394 @@ |
|||||||
|
/* Name: usbconfig.h
|
||||||
|
* Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers |
||||||
|
* Author: Christian Starkjohann |
||||||
|
* Creation Date: 2005-04-01 |
||||||
|
* Tabsize: 4 |
||||||
|
* Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH |
||||||
|
* License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) |
||||||
|
* This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $ |
||||||
|
*/ |
||||||
|
|
||||||
|
#pragma once |
||||||
|
|
||||||
|
#include "config.h" |
||||||
|
|
||||||
|
/*
|
||||||
|
General Description: |
||||||
|
This file is an example configuration (with inline documentation) for the USB |
||||||
|
driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is |
||||||
|
also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may |
||||||
|
wire the lines to any other port, as long as D+ is also wired to INT0 (or any |
||||||
|
other hardware interrupt, as long as it is the highest level interrupt, see |
||||||
|
section at the end of this file). |
||||||
|
*/ |
||||||
|
|
||||||
|
/* ---------------------------- Hardware Config ---------------------------- */ |
||||||
|
|
||||||
|
#define USB_CFG_IOPORTNAME D |
||||||
|
/* This is the port where the USB bus is connected. When you configure it to
|
||||||
|
* "B", the registers PORTB, PINB and DDRB will be used. |
||||||
|
*/ |
||||||
|
#define USB_CFG_DMINUS_BIT 3 |
||||||
|
/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected.
|
||||||
|
* This may be any bit in the port. |
||||||
|
*/ |
||||||
|
#define USB_CFG_DPLUS_BIT 2 |
||||||
|
/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected.
|
||||||
|
* This may be any bit in the port. Please note that D+ must also be connected |
||||||
|
* to interrupt pin INT0! [You can also use other interrupts, see section |
||||||
|
* "Optional MCU Description" below, or you can connect D- to the interrupt, as |
||||||
|
* it is required if you use the USB_COUNT_SOF feature. If you use D- for the |
||||||
|
* interrupt, the USB interrupt will also be triggered at Start-Of-Frame |
||||||
|
* markers every millisecond.] |
||||||
|
*/ |
||||||
|
#define USB_CFG_CLOCK_KHZ (F_CPU/1000) |
||||||
|
/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000,
|
||||||
|
* 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code |
||||||
|
* require no crystal, they tolerate +/- 1% deviation from the nominal |
||||||
|
* frequency. All other rates require a precision of 2000 ppm and thus a |
||||||
|
* crystal! |
||||||
|
* Since F_CPU should be defined to your actual clock rate anyway, you should |
||||||
|
* not need to modify this setting. |
||||||
|
*/ |
||||||
|
#define USB_CFG_CHECK_CRC 0 |
||||||
|
/* Define this to 1 if you want that the driver checks integrity of incoming
|
||||||
|
* data packets (CRC checks). CRC checks cost quite a bit of code size and are |
||||||
|
* currently only available for 18 MHz crystal clock. You must choose |
||||||
|
* USB_CFG_CLOCK_KHZ = 18000 if you enable this option. |
||||||
|
*/ |
||||||
|
|
||||||
|
/* ----------------------- Optional Hardware Config ------------------------ */ |
||||||
|
|
||||||
|
/* #define USB_CFG_PULLUP_IOPORTNAME D */ |
||||||
|
/* If you connect the 1.5k pullup resistor from D- to a port pin instead of
|
||||||
|
* V+, you can connect and disconnect the device from firmware by calling |
||||||
|
* the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h). |
||||||
|
* This constant defines the port on which the pullup resistor is connected. |
||||||
|
*/ |
||||||
|
/* #define USB_CFG_PULLUP_BIT 4 */ |
||||||
|
/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined
|
||||||
|
* above) where the 1.5k pullup resistor is connected. See description |
||||||
|
* above for details. |
||||||
|
*/ |
||||||
|
|
||||||
|
/* --------------------------- Functional Range ---------------------------- */ |
||||||
|
|
||||||
|
#define USB_CFG_HAVE_INTRIN_ENDPOINT 1 |
||||||
|
/* Define this to 1 if you want to compile a version with two endpoints: The
|
||||||
|
* default control endpoint 0 and an interrupt-in endpoint (any other endpoint |
||||||
|
* number). |
||||||
|
*/ |
||||||
|
#define USB_CFG_HAVE_INTRIN_ENDPOINT3 1 |
||||||
|
/* Define this to 1 if you want to compile a version with three endpoints: The
|
||||||
|
* default control endpoint 0, an interrupt-in endpoint 3 (or the number |
||||||
|
* configured below) and a catch-all default interrupt-in endpoint as above. |
||||||
|
* You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature. |
||||||
|
*/ |
||||||
|
#define USB_CFG_EP3_NUMBER 3 |
||||||
|
/* If the so-called endpoint 3 is used, it can now be configured to any other
|
||||||
|
* endpoint number (except 0) with this macro. Default if undefined is 3. |
||||||
|
*/ |
||||||
|
/* #define USB_INITIAL_DATATOKEN USBPID_DATA1 */ |
||||||
|
/* The above macro defines the startup condition for data toggling on the
|
||||||
|
* interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1. |
||||||
|
* Since the token is toggled BEFORE sending any data, the first packet is |
||||||
|
* sent with the oposite value of this configuration! |
||||||
|
*/ |
||||||
|
#define USB_CFG_IMPLEMENT_HALT 0 |
||||||
|
/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature
|
||||||
|
* for endpoint 1 (interrupt endpoint). Although you may not need this feature, |
||||||
|
* it is required by the standard. We have made it a config option because it |
||||||
|
* bloats the code considerably. |
||||||
|
*/ |
||||||
|
#define USB_CFG_SUPPRESS_INTR_CODE 0 |
||||||
|
/* Define this to 1 if you want to declare interrupt-in endpoints, but don't
|
||||||
|
* want to send any data over them. If this macro is defined to 1, functions |
||||||
|
* usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if |
||||||
|
* you need the interrupt-in endpoints in order to comply to an interface |
||||||
|
* (e.g. HID), but never want to send any data. This option saves a couple |
||||||
|
* of bytes in flash memory and the transmit buffers in RAM. |
||||||
|
*/ |
||||||
|
#define USB_CFG_INTR_POLL_INTERVAL 1 |
||||||
|
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
|
||||||
|
* interval. The value is in milliseconds and must not be less than 10 ms for |
||||||
|
* low speed devices. |
||||||
|
*/ |
||||||
|
#define USB_CFG_IS_SELF_POWERED 0 |
||||||
|
/* Define this to 1 if the device has its own power supply. Set it to 0 if the
|
||||||
|
* device is powered from the USB bus. |
||||||
|
*/ |
||||||
|
#define USB_CFG_MAX_BUS_POWER 500 |
||||||
|
/* Set this variable to the maximum USB bus power consumption of your device.
|
||||||
|
* The value is in milliamperes. [It will be divided by two since USB |
||||||
|
* communicates power requirements in units of 2 mA.] |
||||||
|
*/ |
||||||
|
#define USB_CFG_IMPLEMENT_FN_WRITE 1 |
||||||
|
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out
|
||||||
|
* transfers. Set it to 0 if you don't need it and want to save a couple of |
||||||
|
* bytes. |
||||||
|
*/ |
||||||
|
#define USB_CFG_IMPLEMENT_FN_READ 0 |
||||||
|
/* Set this to 1 if you need to send control replies which are generated
|
||||||
|
* "on the fly" when usbFunctionRead() is called. If you only want to send |
||||||
|
* data from a static buffer, set it to 0 and return the data from |
||||||
|
* usbFunctionSetup(). This saves a couple of bytes. |
||||||
|
*/ |
||||||
|
#define USB_CFG_IMPLEMENT_FN_WRITEOUT 0 |
||||||
|
/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints.
|
||||||
|
* You must implement the function usbFunctionWriteOut() which receives all |
||||||
|
* interrupt/bulk data sent to any endpoint other than 0. The endpoint number |
||||||
|
* can be found in 'usbRxToken'. |
||||||
|
*/ |
||||||
|
#define USB_CFG_HAVE_FLOWCONTROL 0 |
||||||
|
/* Define this to 1 if you want flowcontrol over USB data. See the definition
|
||||||
|
* of the macros usbDisableAllRequests() and usbEnableAllRequests() in |
||||||
|
* usbdrv.h. |
||||||
|
*/ |
||||||
|
#define USB_CFG_DRIVER_FLASH_PAGE 0 |
||||||
|
/* If the device has more than 64 kBytes of flash, define this to the 64 k page
|
||||||
|
* where the driver's constants (descriptors) are located. Or in other words: |
||||||
|
* Define this to 1 for boot loaders on the ATMega128. |
||||||
|
*/ |
||||||
|
#define USB_CFG_LONG_TRANSFERS 0 |
||||||
|
/* Define this to 1 if you want to send/receive blocks of more than 254 bytes
|
||||||
|
* in a single control-in or control-out transfer. Note that the capability |
||||||
|
* for long transfers increases the driver size. |
||||||
|
*/ |
||||||
|
/* #define USB_RX_USER_HOOK(data, len) if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */ |
||||||
|
/* This macro is a hook if you want to do unconventional things. If it is
|
||||||
|
* defined, it's inserted at the beginning of received message processing. |
||||||
|
* If you eat the received message and don't want default processing to |
||||||
|
* proceed, do a return after doing your things. One possible application |
||||||
|
* (besides debugging) is to flash a status LED on each packet. |
||||||
|
*/ |
||||||
|
/* #define USB_RESET_HOOK(resetStarts) if(!resetStarts){hadUsbReset();} */ |
||||||
|
/* This macro is a hook if you need to know when an USB RESET occurs. It has
|
||||||
|
* one parameter which distinguishes between the start of RESET state and its |
||||||
|
* end. |
||||||
|
*/ |
||||||
|
/* #define USB_SET_ADDRESS_HOOK() hadAddressAssigned(); */ |
||||||
|
/* This macro (if defined) is executed when a USB SET_ADDRESS request was
|
||||||
|
* received. |
||||||
|
*/ |
||||||
|
#define USB_COUNT_SOF 1 |
||||||
|
/* define this macro to 1 if you need the global variable "usbSofCount" which
|
||||||
|
* counts SOF packets. This feature requires that the hardware interrupt is |
||||||
|
* connected to D- instead of D+. |
||||||
|
*/ |
||||||
|
/* #ifdef __ASSEMBLER__
|
||||||
|
* macro myAssemblerMacro |
||||||
|
* in YL, TCNT0 |
||||||
|
* sts timer0Snapshot, YL |
||||||
|
* endm |
||||||
|
* #endif |
||||||
|
* #define USB_SOF_HOOK myAssemblerMacro |
||||||
|
* This macro (if defined) is executed in the assembler module when a |
||||||
|
* Start Of Frame condition is detected. It is recommended to define it to |
||||||
|
* the name of an assembler macro which is defined here as well so that more |
||||||
|
* than one assembler instruction can be used. The macro may use the register |
||||||
|
* YL and modify SREG. If it lasts longer than a couple of cycles, USB messages |
||||||
|
* immediately after an SOF pulse may be lost and must be retried by the host. |
||||||
|
* What can you do with this hook? Since the SOF signal occurs exactly every |
||||||
|
* 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in |
||||||
|
* designs running on the internal RC oscillator. |
||||||
|
* Please note that Start Of Frame detection works only if D- is wired to the |
||||||
|
* interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES! |
||||||
|
*/ |
||||||
|
#define USB_CFG_CHECK_DATA_TOGGLING 0 |
||||||
|
/* define this macro to 1 if you want to filter out duplicate data packets
|
||||||
|
* sent by the host. Duplicates occur only as a consequence of communication |
||||||
|
* errors, when the host does not receive an ACK. Please note that you need to |
||||||
|
* implement the filtering yourself in usbFunctionWriteOut() and |
||||||
|
* usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable |
||||||
|
* for each control- and out-endpoint to check for duplicate packets. |
||||||
|
*/ |
||||||
|
#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH 0 |
||||||
|
/* define this macro to 1 if you want the function usbMeasureFrameLength()
|
||||||
|
* compiled in. This function can be used to calibrate the AVR's RC oscillator. |
||||||
|
*/ |
||||||
|
#define USB_USE_FAST_CRC 0 |
||||||
|
/* The assembler module has two implementations for the CRC algorithm. One is
|
||||||
|
* faster, the other is smaller. This CRC routine is only used for transmitted |
||||||
|
* messages where timing is not critical. The faster routine needs 31 cycles |
||||||
|
* per byte while the smaller one needs 61 to 69 cycles. The faster routine |
||||||
|
* may be worth the 32 bytes bigger code size if you transmit lots of data and |
||||||
|
* run the AVR close to its limit. |
||||||
|
*/ |
||||||
|
|
||||||
|
/* -------------------------- Device Description --------------------------- */ |
||||||
|
|
||||||
|
#define USB_CFG_VENDOR_ID (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF) |
||||||
|
/* USB vendor ID for the device, low byte first. If you have registered your
|
||||||
|
* own Vendor ID, define it here. Otherwise you may use one of obdev's free |
||||||
|
* shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules! |
||||||
|
* *** IMPORTANT NOTE *** |
||||||
|
* This template uses obdev's shared VID/PID pair for Vendor Class devices |
||||||
|
* with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand |
||||||
|
* the implications! |
||||||
|
*/ |
||||||
|
#define USB_CFG_DEVICE_ID (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF) |
||||||
|
/* This is the ID of the product, low byte first. It is interpreted in the
|
||||||
|
* scope of the vendor ID. If you have registered your own VID with usb.org |
||||||
|
* or if you have licensed a PID from somebody else, define it here. Otherwise |
||||||
|
* you may use one of obdev's free shared VID/PID pairs. See the file |
||||||
|
* USB-IDs-for-free.txt for details! |
||||||
|
* *** IMPORTANT NOTE *** |
||||||
|
* This template uses obdev's shared VID/PID pair for Vendor Class devices |
||||||
|
* with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand |
||||||
|
* the implications! |
||||||
|
*/ |
||||||
|
#define USB_CFG_DEVICE_VERSION 0x00, 0x02 |
||||||
|
/* Version number of the device: Minor number first, then major number.
|
||||||
|
*/ |
||||||
|
#define USB_CFG_VENDOR_NAME 'D', 'o', 'n', 'u', 't', 'C', 'a', 'b', 'l', 'e', 's' |
||||||
|
#define USB_CFG_VENDOR_NAME_LEN 11 |
||||||
|
/* These two values define the vendor name returned by the USB device. The name
|
||||||
|
* must be given as a list of characters under single quotes. The characters |
||||||
|
* are interpreted as Unicode (UTF-16) entities. |
||||||
|
* If you don't want a vendor name string, undefine these macros. |
||||||
|
* ALWAYS define a vendor name containing your Internet domain name if you use |
||||||
|
* obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for |
||||||
|
* details. |
||||||
|
*/ |
||||||
|
#define USB_CFG_DEVICE_NAME 'b', 'u', 'd', 'g', 'e', 't', '9', '6' |
||||||
|
#define USB_CFG_DEVICE_NAME_LEN 8 |
||||||
|
/* Same as above for the device name. If you don't want a device name, undefine
|
||||||
|
* the macros. See the file USB-IDs-for-free.txt before you assign a name if |
||||||
|
* you use a shared VID/PID. |
||||||
|
*/ |
||||||
|
/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */ |
||||||
|
/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */ |
||||||
|
/* Same as above for the serial number. If you don't want a serial number,
|
||||||
|
* undefine the macros. |
||||||
|
* It may be useful to provide the serial number through other means than at |
||||||
|
* compile time. See the section about descriptor properties below for how |
||||||
|
* to fine tune control over USB descriptors such as the string descriptor |
||||||
|
* for the serial number. |
||||||
|
*/ |
||||||
|
#define USB_CFG_DEVICE_CLASS 0 |
||||||
|
#define USB_CFG_DEVICE_SUBCLASS 0 |
||||||
|
/* See USB specification if you want to conform to an existing device class.
|
||||||
|
* Class 0xff is "vendor specific". |
||||||
|
*/ |
||||||
|
#define USB_CFG_INTERFACE_CLASS 3 /* HID */ |
||||||
|
#define USB_CFG_INTERFACE_SUBCLASS 1 /* Boot */ |
||||||
|
#define USB_CFG_INTERFACE_PROTOCOL 1 /* Keyboard */ |
||||||
|
/* See USB specification if you want to conform to an existing device class or
|
||||||
|
* protocol. The following classes must be set at interface level: |
||||||
|
* HID class is 3, no subclass and protocol required (but may be useful!) |
||||||
|
* CDC class is 2, use subclass 2 and protocol 1 for ACM |
||||||
|
*/ |
||||||
|
#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH 0 |
||||||
|
/* Define this to the length of the HID report descriptor, if you implement
|
||||||
|
* an HID device. Otherwise don't define it or define it to 0. |
||||||
|
* If you use this define, you must add a PROGMEM character array named |
||||||
|
* "usbHidReportDescriptor" to your code which contains the report descriptor. |
||||||
|
* Don't forget to keep the array and this define in sync! |
||||||
|
*/ |
||||||
|
|
||||||
|
/* #define USB_PUBLIC static */ |
||||||
|
/* Use the define above if you #include usbdrv.c instead of linking against it.
|
||||||
|
* This technique saves a couple of bytes in flash memory. |
||||||
|
*/ |
||||||
|
|
||||||
|
/* ------------------- Fine Control over USB Descriptors ------------------- */ |
||||||
|
/* If you don't want to use the driver's default USB descriptors, you can
|
||||||
|
* provide our own. These can be provided as (1) fixed length static data in |
||||||
|
* flash memory, (2) fixed length static data in RAM or (3) dynamically at |
||||||
|
* runtime in the function usbFunctionDescriptor(). See usbdrv.h for more |
||||||
|
* information about this function. |
||||||
|
* Descriptor handling is configured through the descriptor's properties. If |
||||||
|
* no properties are defined or if they are 0, the default descriptor is used. |
||||||
|
* Possible properties are: |
||||||
|
* + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched |
||||||
|
* at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is |
||||||
|
* used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if |
||||||
|
* you want RAM pointers. |
||||||
|
* + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found |
||||||
|
* in static memory is in RAM, not in flash memory. |
||||||
|
* + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash), |
||||||
|
* the driver must know the descriptor's length. The descriptor itself is |
||||||
|
* found at the address of a well known identifier (see below). |
||||||
|
* List of static descriptor names (must be declared PROGMEM if in flash): |
||||||
|
* char usbDescriptorDevice[]; |
||||||
|
* char usbDescriptorConfiguration[]; |
||||||
|
* char usbDescriptorHidReport[]; |
||||||
|
* char usbDescriptorString0[]; |
||||||
|
* int usbDescriptorStringVendor[]; |
||||||
|
* int usbDescriptorStringDevice[]; |
||||||
|
* int usbDescriptorStringSerialNumber[]; |
||||||
|
* Other descriptors can't be provided statically, they must be provided |
||||||
|
* dynamically at runtime. |
||||||
|
* |
||||||
|
* Descriptor properties are or-ed or added together, e.g.: |
||||||
|
* #define USB_CFG_DESCR_PROPS_DEVICE (USB_PROP_IS_RAM | USB_PROP_LENGTH(18)) |
||||||
|
* |
||||||
|
* The following descriptors are defined: |
||||||
|
* USB_CFG_DESCR_PROPS_DEVICE |
||||||
|
* USB_CFG_DESCR_PROPS_CONFIGURATION |
||||||
|
* USB_CFG_DESCR_PROPS_STRINGS |
||||||
|
* USB_CFG_DESCR_PROPS_STRING_0 |
||||||
|
* USB_CFG_DESCR_PROPS_STRING_VENDOR |
||||||
|
* USB_CFG_DESCR_PROPS_STRING_PRODUCT |
||||||
|
* USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER |
||||||
|
* USB_CFG_DESCR_PROPS_HID |
||||||
|
* USB_CFG_DESCR_PROPS_HID_REPORT |
||||||
|
* USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver) |
||||||
|
* |
||||||
|
* Note about string descriptors: String descriptors are not just strings, they |
||||||
|
* are Unicode strings prefixed with a 2 byte header. Example: |
||||||
|
* int serialNumberDescriptor[] = { |
||||||
|
* USB_STRING_DESCRIPTOR_HEADER(6), |
||||||
|
* 'S', 'e', 'r', 'i', 'a', 'l' |
||||||
|
* }; |
||||||
|
*/ |
||||||
|
|
||||||
|
#define USB_CFG_DESCR_PROPS_DEVICE 0 |
||||||
|
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC |
||||||
|
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
|
||||||
|
#define USB_CFG_DESCR_PROPS_STRINGS 0 |
||||||
|
#define USB_CFG_DESCR_PROPS_STRING_0 0 |
||||||
|
#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0 |
||||||
|
#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0 |
||||||
|
#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0 |
||||||
|
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC |
||||||
|
//#define USB_CFG_DESCR_PROPS_HID 0
|
||||||
|
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC |
||||||
|
//#define USB_CFG_DESCR_PROPS_HID_REPORT 0
|
||||||
|
#define USB_CFG_DESCR_PROPS_UNKNOWN 0 |
||||||
|
|
||||||
|
#define usbMsgPtr_t unsigned short |
||||||
|
/* If usbMsgPtr_t is not defined, it defaults to 'uchar *'. We define it to
|
||||||
|
* a scalar type here because gcc generates slightly shorter code for scalar |
||||||
|
* arithmetics than for pointer arithmetics. Remove this define for backward |
||||||
|
* type compatibility or define it to an 8 bit type if you use data in RAM only |
||||||
|
* and all RAM is below 256 bytes (tiny memory model in IAR CC). |
||||||
|
*/ |
||||||
|
|
||||||
|
/* ----------------------- Optional MCU Description ------------------------ */ |
||||||
|
|
||||||
|
/* The following configurations have working defaults in usbdrv.h. You
|
||||||
|
* usually don't need to set them explicitly. Only if you want to run |
||||||
|
* the driver on a device which is not yet supported or with a compiler |
||||||
|
* which is not fully supported (such as IAR C) or if you use a differnt |
||||||
|
* interrupt than INT0, you may have to define some of these. |
||||||
|
*/ |
||||||
|
/* #define USB_INTR_CFG MCUCR */ |
||||||
|
/* #define USB_INTR_CFG_SET ((1 << ISC00) | (1 << ISC01)) */ |
||||||
|
/* #define USB_INTR_CFG_CLR 0 */ |
||||||
|
/* #define USB_INTR_ENABLE GIMSK */ |
||||||
|
/* #define USB_INTR_ENABLE_BIT INT0 */ |
||||||
|
/* #define USB_INTR_PENDING GIFR */ |
||||||
|
/* #define USB_INTR_PENDING_BIT INTF0 */ |
||||||
|
/* #define USB_INTR_VECTOR INT0_vect */ |
||||||
|
|
||||||
|
/* Set INT1 for D- falling edge to count SOF */ |
||||||
|
/* #define USB_INTR_CFG EICRA */ |
||||||
|
#define USB_INTR_CFG_SET ((1 << ISC11) | (0 << ISC10)) |
||||||
|
/* #define USB_INTR_CFG_CLR 0 */ |
||||||
|
/* #define USB_INTR_ENABLE EIMSK */ |
||||||
|
#define USB_INTR_ENABLE_BIT INT1 |
||||||
|
/* #define USB_INTR_PENDING EIFR */ |
||||||
|
#define USB_INTR_PENDING_BIT INTF1 |
||||||
|
#define USB_INTR_VECTOR INT1_vect |
||||||
|
|
||||||
@ -0,0 +1,12 @@ |
|||||||
|
# Donut Cables |
||||||
|
|
||||||
|
Donut Cables LLC is located in North Carolina, USA. |
||||||
|
|
||||||
|
Website: https://donutcables.com/ |
||||||
|
|
||||||
|
**Contact Donut Cables at the following:** |
||||||
|
|
||||||
|
Email: contact@donutcables.com |
||||||
|
Reddit: /u/donutcat_cables |
||||||
|
Geekhack/DeskThority: donutcat |
||||||
|
Discord: @donutcat on the #mechkeys Discord |
||||||
Loading…
Reference in new issue