skullY
8 years ago
parent
9158673166
commit
fcd08b8c7d
@ -1,161 +1,161 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="CDC Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.128_4" force-caption="true" workspace-name="lufa_cdc_128kb_4kb_"> |
||||
<require idref="lufa.bootloaders.cdc"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x1F000"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/> |
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> |
||||
</project> |
||||
|
||||
<project caption="CDC Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.64_4" force-caption="true" workspace-name="lufa_cdc_64kb_4kb_"> |
||||
<require idref="lufa.bootloaders.cdc"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb647"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0xF000"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/> |
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> |
||||
</project> |
||||
|
||||
<project caption="CDC Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.32_4" force-caption="true" workspace-name="lufa_cdc_32kb_4kb_"> |
||||
<require idref="lufa.bootloaders.cdc"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atmega32u4"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x7000"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/> |
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> |
||||
</project> |
||||
|
||||
<project caption="CDC Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.16_4" force-caption="true" workspace-name="lufa_cdc_16kb_4kb_"> |
||||
<require idref="lufa.bootloaders.cdc"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atmega16u2"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x3000"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/> |
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> |
||||
</project> |
||||
|
||||
<project caption="CDC Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.8_4" force-caption="true" workspace-name="lufa_cdc_8kb_4kb_"> |
||||
<require idref="lufa.bootloaders.cdc"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atmega8u2"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x1000"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/> |
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.bootloaders.cdc" caption="CDC Bootloader"> |
||||
<info type="description" value="summary"> |
||||
CDC Class Bootloader, capable of reprogramming a device using avrdude or other AVR109 protocol compliant software when plugged into a host. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Bootloaders"/> |
||||
<keyword value="USB Device"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="include-path" value="."/> |
||||
<build type="c-source" value="BootloaderCDC.c"/> |
||||
<build type="header-file" value="BootloaderCDC.h"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
<build type="c-source" value="BootloaderAPI.c"/> |
||||
<build type="header-file" value="BootloaderAPI.h"/> |
||||
<build type="asm-source" value="BootloaderAPITable.S"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
<build type="header-file" value="Config/AppConfig.h"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="BootloaderCDC.txt"/> |
||||
<build type="distribute" subtype="user-file" value="LUFA CDC Bootloader.inf"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="CDC Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.128_4" force-caption="true" workspace-name="lufa_cdc_128kb_4kb_"> |
||||
<require idref="lufa.bootloaders.cdc"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x1F000"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/> |
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> |
||||
</project> |
||||
|
||||
<project caption="CDC Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.64_4" force-caption="true" workspace-name="lufa_cdc_64kb_4kb_"> |
||||
<require idref="lufa.bootloaders.cdc"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb647"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0xF000"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/> |
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> |
||||
</project> |
||||
|
||||
<project caption="CDC Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.32_4" force-caption="true" workspace-name="lufa_cdc_32kb_4kb_"> |
||||
<require idref="lufa.bootloaders.cdc"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atmega32u4"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x7000"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/> |
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> |
||||
</project> |
||||
|
||||
<project caption="CDC Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.16_4" force-caption="true" workspace-name="lufa_cdc_16kb_4kb_"> |
||||
<require idref="lufa.bootloaders.cdc"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atmega16u2"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x3000"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/> |
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> |
||||
</project> |
||||
|
||||
<project caption="CDC Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.cdc.avr8.8_4" force-caption="true" workspace-name="lufa_cdc_8kb_4kb_"> |
||||
<require idref="lufa.bootloaders.cdc"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atmega8u2"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x1000"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/> |
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.bootloaders.cdc" caption="CDC Bootloader"> |
||||
<info type="description" value="summary"> |
||||
CDC Class Bootloader, capable of reprogramming a device using avrdude or other AVR109 protocol compliant software when plugged into a host. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Bootloaders"/> |
||||
<keyword value="USB Device"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="include-path" value="."/> |
||||
<build type="c-source" value="BootloaderCDC.c"/> |
||||
<build type="header-file" value="BootloaderCDC.h"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
<build type="c-source" value="BootloaderAPI.c"/> |
||||
<build type="header-file" value="BootloaderAPI.h"/> |
||||
<build type="asm-source" value="BootloaderAPITable.S"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
<build type="header-file" value="Config/AppConfig.h"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="BootloaderCDC.txt"/> |
||||
<build type="distribute" subtype="user-file" value="LUFA CDC Bootloader.inf"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,156 +1,156 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="DFU Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.128_4" force-caption="true" workspace-name="lufa_dfu_128kb_4kb_"> |
||||
<require idref="lufa.bootloaders.dfu"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x1F000"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/> |
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> |
||||
</project> |
||||
|
||||
<project caption="DFU Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.64_4" force-caption="true" workspace-name="lufa_dfu_64kb_4kb_"> |
||||
<require idref="lufa.bootloaders.dfu"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb647"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0xF000"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/> |
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> |
||||
</project> |
||||
|
||||
<project caption="DFU Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.32_4" force-caption="true" workspace-name="lufa_dfu_32kb_4kb_"> |
||||
<require idref="lufa.bootloaders.dfu"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atmega32u4"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x7000"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/> |
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> |
||||
</project> |
||||
|
||||
<project caption="DFU Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.16_4" force-caption="true" workspace-name="lufa_dfu_16kb_4kb_"> |
||||
<require idref="lufa.bootloaders.dfu"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atmega16u2"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x3000"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/> |
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> |
||||
</project> |
||||
|
||||
<project caption="DFU Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.8_4" force-caption="true" workspace-name="lufa_dfu_8kb_4kb_"> |
||||
<require idref="lufa.bootloaders.dfu"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atmega8u2"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x1000"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/> |
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.bootloaders.dfu" caption="DFU Bootloader"> |
||||
<info type="description" value="summary"> |
||||
DFU Class Bootloader, capable of reprogramming a device using the Atmel FLIP or other AVR DFU programming software when plugged into a host. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Bootloaders"/> |
||||
<keyword value="USB Device"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="include-path" value="."/> |
||||
<build type="c-source" value="BootloaderDFU.c"/> |
||||
<build type="header-file" value="BootloaderDFU.h"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
<build type="c-source" value="BootloaderAPI.c"/> |
||||
<build type="header-file" value="BootloaderAPI.h"/> |
||||
<build type="asm-source" value="BootloaderAPITable.S"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
<build type="header-file" value="Config/AppConfig.h"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="BootloaderDFU.txt"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="DFU Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.128_4" force-caption="true" workspace-name="lufa_dfu_128kb_4kb_"> |
||||
<require idref="lufa.bootloaders.dfu"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x1F000"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/> |
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> |
||||
</project> |
||||
|
||||
<project caption="DFU Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.64_4" force-caption="true" workspace-name="lufa_dfu_64kb_4kb_"> |
||||
<require idref="lufa.bootloaders.dfu"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb647"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0xF000"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/> |
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> |
||||
</project> |
||||
|
||||
<project caption="DFU Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.32_4" force-caption="true" workspace-name="lufa_dfu_32kb_4kb_"> |
||||
<require idref="lufa.bootloaders.dfu"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atmega32u4"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x7000"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/> |
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> |
||||
</project> |
||||
|
||||
<project caption="DFU Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.16_4" force-caption="true" workspace-name="lufa_dfu_16kb_4kb_"> |
||||
<require idref="lufa.bootloaders.dfu"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atmega16u2"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x3000"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/> |
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> |
||||
</project> |
||||
|
||||
<project caption="DFU Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.dfu.avr8.8_4" force-caption="true" workspace-name="lufa_dfu_8kb_4kb_"> |
||||
<require idref="lufa.bootloaders.dfu"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atmega8u2"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x1000"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/> |
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.bootloaders.dfu" caption="DFU Bootloader"> |
||||
<info type="description" value="summary"> |
||||
DFU Class Bootloader, capable of reprogramming a device using the Atmel FLIP or other AVR DFU programming software when plugged into a host. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Bootloaders"/> |
||||
<keyword value="USB Device"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="include-path" value="."/> |
||||
<build type="c-source" value="BootloaderDFU.c"/> |
||||
<build type="header-file" value="BootloaderDFU.h"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
<build type="c-source" value="BootloaderAPI.c"/> |
||||
<build type="header-file" value="BootloaderAPI.h"/> |
||||
<build type="asm-source" value="BootloaderAPITable.S"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
<build type="header-file" value="Config/AppConfig.h"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="BootloaderDFU.txt"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,123 +1,123 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="HID Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.128_4" force-caption="true" workspace-name="lufa_hid_128kb_4kb_"> |
||||
<require idref="lufa.bootloaders.hid"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x1F000"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/> |
||||
</project> |
||||
|
||||
<project caption="HID Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.64_4" force-caption="true" workspace-name="lufa_hid_64kb_4kb_"> |
||||
<require idref="lufa.bootloaders.hid"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb647"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0xF000"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/> |
||||
</project> |
||||
|
||||
<project caption="HID Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.32_4" force-caption="true" workspace-name="lufa_hid_32kb_4kb_"> |
||||
<require idref="lufa.bootloaders.hid"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atmega32u4"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x7000"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/> |
||||
</project> |
||||
|
||||
<project caption="HID Bootloader - 16KB FLASH / 2KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.16_2" force-caption="true" workspace-name="lufa_hid_16kb_2kb_"> |
||||
<require idref="lufa.bootloaders.hid"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atmega16u2"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x3800"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x3800"/> |
||||
</project> |
||||
|
||||
<project caption="HID Bootloader - 8KB FLASH / 2KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.8_2" force-caption="true" workspace-name="lufa_hid_8kb_2kb_"> |
||||
<require idref="lufa.bootloaders.hid"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atmega8u2"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x1800"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1800"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.bootloaders.hid" caption="HID Bootloader"> |
||||
<info type="description" value="summary"> |
||||
HID Class Bootloader, capable of reprogramming a device via a custom cross-platform command line utility when plugged into a host. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Bootloaders"/> |
||||
<keyword value="USB Device"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="include-path" value="."/> |
||||
<build type="c-source" value="BootloaderHID.c"/> |
||||
<build type="header-file" value="BootloaderHID.h"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="BootloaderHID.txt"/> |
||||
<build type="distribute" subtype="directory" value="HostLoaderApp"/> |
||||
<build type="distribute" subtype="directory" value="HostLoaderApp_Python"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="HID Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.128_4" force-caption="true" workspace-name="lufa_hid_128kb_4kb_"> |
||||
<require idref="lufa.bootloaders.hid"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x1F000"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/> |
||||
</project> |
||||
|
||||
<project caption="HID Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.64_4" force-caption="true" workspace-name="lufa_hid_64kb_4kb_"> |
||||
<require idref="lufa.bootloaders.hid"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb647"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0xF000"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/> |
||||
</project> |
||||
|
||||
<project caption="HID Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.32_4" force-caption="true" workspace-name="lufa_hid_32kb_4kb_"> |
||||
<require idref="lufa.bootloaders.hid"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atmega32u4"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x7000"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/> |
||||
</project> |
||||
|
||||
<project caption="HID Bootloader - 16KB FLASH / 2KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.16_2" force-caption="true" workspace-name="lufa_hid_16kb_2kb_"> |
||||
<require idref="lufa.bootloaders.hid"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atmega16u2"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x3800"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x3800"/> |
||||
</project> |
||||
|
||||
<project caption="HID Bootloader - 8KB FLASH / 2KB Boot - AVR8 Architecture" id="lufa.bootloaders.hid.avr8.8_2" force-caption="true" workspace-name="lufa_hid_8kb_2kb_"> |
||||
<require idref="lufa.bootloaders.hid"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atmega8u2"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x1800"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1800"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.bootloaders.hid" caption="HID Bootloader"> |
||||
<info type="description" value="summary"> |
||||
HID Class Bootloader, capable of reprogramming a device via a custom cross-platform command line utility when plugged into a host. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Bootloaders"/> |
||||
<keyword value="USB Device"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="include-path" value="."/> |
||||
<build type="c-source" value="BootloaderHID.c"/> |
||||
<build type="header-file" value="BootloaderHID.h"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="BootloaderHID.txt"/> |
||||
<build type="distribute" subtype="directory" value="HostLoaderApp"/> |
||||
<build type="distribute" subtype="directory" value="HostLoaderApp_Python"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,156 +1,156 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Mass Storage Bootloader - 128KB FLASH / 8KB Boot - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.128_8" force-caption="true" workspace-name="lufa_ms_128kb_8kb_"> |
||||
<require idref="lufa.bootloaders.mass_storage"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x1E000"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1E000"/> |
||||
|
||||
<build type="define" name="AUX_BOOT_SECTION_SIZE" value="0"/> |
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> |
||||
</project> |
||||
|
||||
<project caption="Mass Storage Bootloader - 64KB FLASH / 8KB Boot - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.64_8" force-caption="true" workspace-name="lufa_ms_64kb_8kb_"> |
||||
<require idref="lufa.bootloaders.mass_storage"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb647"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0xE000"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0xE000"/> |
||||
|
||||
<build type="define" name="AUX_BOOT_SECTION_SIZE" value="0"/> |
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> |
||||
</project> |
||||
|
||||
<project caption="Mass Storage Bootloader - 32KB FLASH / 4KB Boot (2KB AUX) - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.32_4" force-caption="true" workspace-name="lufa_ms_32kb_4kb_"> |
||||
<require idref="lufa.bootloaders.mass_storage"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atmega32u4"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x7000"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/> |
||||
|
||||
<build type="define" name="AUX_BOOT_SECTION_SIZE" value="2048"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.boot_aux=0x6810"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.boot_aux_trampoline=0x6800"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=Boot_AUX_Trampoline"/> |
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> |
||||
</project> |
||||
|
||||
<project caption="Mass Storage Bootloader - 16KB FLASH / 4KB Boot (2KB AUX) - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.16_4" force-caption="true" workspace-name="lufa_ms_16kb_4kb_"> |
||||
<require idref="lufa.bootloaders.mass_storage"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atmega16u2"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x3000"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/> |
||||
|
||||
<build type="define" name="AUX_BOOT_SECTION_SIZE" value="2048"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.boot_aux=0x2810"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.boot_aux_trampoline=0x2800"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=Boot_AUX_Trampoline"/> |
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.bootloaders.mass_storage" caption="Mass Storage Bootloader"> |
||||
<info type="description" value="summary"> |
||||
Mass Storage Class Bootloader, capable of reprogramming a device via binary BIN files copied to the virtual FAT12 file-system it creates when plugged into a host. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Bootloaders"/> |
||||
<keyword value="USB Device"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="include-path" value="."/> |
||||
<build type="c-source" value="BootloaderMassStorage.c"/> |
||||
<build type="header-file" value="BootloaderMassStorage.h"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
<build type="c-source" value="BootloaderAPI.c"/> |
||||
<build type="header-file" value="BootloaderAPI.h"/> |
||||
<build type="asm-source" value="BootloaderAPITable.S"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
<build type="header-file" value="Config/AppConfig.h"/> |
||||
|
||||
<build type="include-path" value="Lib"/> |
||||
<build type="header-file" value="Lib/VirtualFAT.h"/> |
||||
<build type="c-source" value="Lib/VirtualFAT.c"/> |
||||
<build type="header-file" value="Lib/SCSI.h"/> |
||||
<build type="c-source" value="Lib/SCSI.c"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="BootloaderMassStorage.txt"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Mass Storage Bootloader - 128KB FLASH / 8KB Boot - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.128_8" force-caption="true" workspace-name="lufa_ms_128kb_8kb_"> |
||||
<require idref="lufa.bootloaders.mass_storage"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x1E000"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1E000"/> |
||||
|
||||
<build type="define" name="AUX_BOOT_SECTION_SIZE" value="0"/> |
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> |
||||
</project> |
||||
|
||||
<project caption="Mass Storage Bootloader - 64KB FLASH / 8KB Boot - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.64_8" force-caption="true" workspace-name="lufa_ms_64kb_8kb_"> |
||||
<require idref="lufa.bootloaders.mass_storage"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb647"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0xE000"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0xE000"/> |
||||
|
||||
<build type="define" name="AUX_BOOT_SECTION_SIZE" value="0"/> |
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> |
||||
</project> |
||||
|
||||
<project caption="Mass Storage Bootloader - 32KB FLASH / 4KB Boot (2KB AUX) - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.32_4" force-caption="true" workspace-name="lufa_ms_32kb_4kb_"> |
||||
<require idref="lufa.bootloaders.mass_storage"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atmega32u4"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x7000"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/> |
||||
|
||||
<build type="define" name="AUX_BOOT_SECTION_SIZE" value="2048"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.boot_aux=0x6810"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.boot_aux_trampoline=0x6800"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=Boot_AUX_Trampoline"/> |
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> |
||||
</project> |
||||
|
||||
<project caption="Mass Storage Bootloader - 16KB FLASH / 4KB Boot (2KB AUX) - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.16_4" force-caption="true" workspace-name="lufa_ms_16kb_4kb_"> |
||||
<require idref="lufa.bootloaders.mass_storage"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atmega16u2"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x3000"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/> |
||||
|
||||
<build type="define" name="AUX_BOOT_SECTION_SIZE" value="2048"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.boot_aux=0x2810"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.boot_aux_trampoline=0x2800"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=Boot_AUX_Trampoline"/> |
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.bootloaders.mass_storage" caption="Mass Storage Bootloader"> |
||||
<info type="description" value="summary"> |
||||
Mass Storage Class Bootloader, capable of reprogramming a device via binary BIN files copied to the virtual FAT12 file-system it creates when plugged into a host. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Bootloaders"/> |
||||
<keyword value="USB Device"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="include-path" value="."/> |
||||
<build type="c-source" value="BootloaderMassStorage.c"/> |
||||
<build type="header-file" value="BootloaderMassStorage.h"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
<build type="c-source" value="BootloaderAPI.c"/> |
||||
<build type="header-file" value="BootloaderAPI.h"/> |
||||
<build type="asm-source" value="BootloaderAPITable.S"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
<build type="header-file" value="Config/AppConfig.h"/> |
||||
|
||||
<build type="include-path" value="Lib"/> |
||||
<build type="header-file" value="Lib/VirtualFAT.h"/> |
||||
<build type="c-source" value="Lib/VirtualFAT.c"/> |
||||
<build type="header-file" value="Lib/SCSI.h"/> |
||||
<build type="c-source" value="Lib/SCSI.c"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="BootloaderMassStorage.txt"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,159 +1,159 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Printer Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.128_4" force-caption="true" workspace-name="lufa_printer_128kb_4kb_"> |
||||
<require idref="lufa.bootloaders.printer"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x1F000"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/> |
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> |
||||
</project> |
||||
|
||||
<project caption="Printer Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.64_4" force-caption="true" workspace-name="lufa_printer_64kb_4kb_"> |
||||
<require idref="lufa.bootloaders.printer"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb647"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0xF000"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/> |
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> |
||||
</project> |
||||
|
||||
<project caption="Printer Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.32_4" force-caption="true" workspace-name="lufa_printer_32kb_4kb_"> |
||||
<require idref="lufa.bootloaders.printer"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atmega32u4"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x7000"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/> |
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> |
||||
</project> |
||||
|
||||
<project caption="Printer Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.16_4" force-caption="true" workspace-name="lufa_printer_16kb_4kb_"> |
||||
<require idref="lufa.bootloaders.printer"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atmega16u2"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x3000"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/> |
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> |
||||
</project> |
||||
|
||||
<project caption="Printer Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.8_4" force-caption="true" workspace-name="lufa_printer_8kb_4kb_"> |
||||
<require idref="lufa.bootloaders.printer"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atmega8u2"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x1000"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/> |
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.bootloaders.printer" caption="Printer Bootloader"> |
||||
<info type="description" value="summary"> |
||||
Printer Class Bootloader, capable of reprogramming a device by "printing" new HEX files to the virtual Plain-Text printer it creates when plugged into a host. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Bootloaders"/> |
||||
<keyword value="USB Device"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="include-path" value="."/> |
||||
<build type="c-source" value="BootloaderPrinter.c"/> |
||||
<build type="header-file" value="BootloaderPrinter.h"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
<build type="c-source" value="BootloaderAPI.c"/> |
||||
<build type="header-file" value="BootloaderAPI.h"/> |
||||
<build type="asm-source" value="BootloaderAPITable.S"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="BootloaderPrinter.txt"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Printer Bootloader - 128KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.128_4" force-caption="true" workspace-name="lufa_printer_128kb_4kb_"> |
||||
<require idref="lufa.bootloaders.printer"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x1F000"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1F000"/> |
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> |
||||
</project> |
||||
|
||||
<project caption="Printer Bootloader - 64KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.64_4" force-caption="true" workspace-name="lufa_printer_64kb_4kb_"> |
||||
<require idref="lufa.bootloaders.printer"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb647"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0xF000"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0xF000"/> |
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> |
||||
</project> |
||||
|
||||
<project caption="Printer Bootloader - 32KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.32_4" force-caption="true" workspace-name="lufa_printer_32kb_4kb_"> |
||||
<require idref="lufa.bootloaders.printer"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atmega32u4"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x7000"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/> |
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> |
||||
</project> |
||||
|
||||
<project caption="Printer Bootloader - 16KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.16_4" force-caption="true" workspace-name="lufa_printer_16kb_4kb_"> |
||||
<require idref="lufa.bootloaders.printer"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atmega16u2"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x3000"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/> |
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> |
||||
</project> |
||||
|
||||
<project caption="Printer Bootloader - 8KB FLASH / 4KB Boot - AVR8 Architecture" id="lufa.bootloaders.printer.avr8.8_4" force-caption="true" workspace-name="lufa_printer_8kb_4kb_"> |
||||
<require idref="lufa.bootloaders.printer"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atmega8u2"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<config name="config.compiler.optimization.level" value="size"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
|
||||
<build type="define" name="BOOT_START_ADDR" value="0x1000"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.text=0x1000"/> |
||||
|
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FA0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FE0"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> |
||||
<build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FF8"/> |
||||
<build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.bootloaders.printer" caption="Printer Bootloader"> |
||||
<info type="description" value="summary"> |
||||
Printer Class Bootloader, capable of reprogramming a device by "printing" new HEX files to the virtual Plain-Text printer it creates when plugged into a host. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Bootloaders"/> |
||||
<keyword value="USB Device"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="include-path" value="."/> |
||||
<build type="c-source" value="BootloaderPrinter.c"/> |
||||
<build type="header-file" value="BootloaderPrinter.h"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
<build type="c-source" value="BootloaderAPI.c"/> |
||||
<build type="header-file" value="BootloaderAPI.h"/> |
||||
<build type="asm-source" value="BootloaderAPITable.S"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="BootloaderPrinter.txt"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,52 +1,52 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Audio Input Device Demo (Class Driver APIs)" id="lufa.demos.device.class.audio_input.example.avr8"> |
||||
<require idref="lufa.demos.device.class.audio_input"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.class.audio_input" caption="Audio Input Device Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Audio 1.0 Input device demo, implementing a basic USB microphone. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="Audio Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="AudioInput.txt"/> |
||||
|
||||
<build type="c-source" value="AudioInput.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="AudioInput.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="module-config" subtype="required-header-file" value="AppConfig.h"/> |
||||
<build type="header-file" value="Config/AppConfig.h"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.adc"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.buttons"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Audio Input Device Demo (Class Driver APIs)" id="lufa.demos.device.class.audio_input.example.avr8"> |
||||
<require idref="lufa.demos.device.class.audio_input"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.class.audio_input" caption="Audio Input Device Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Audio 1.0 Input device demo, implementing a basic USB microphone. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="Audio Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="AudioInput.txt"/> |
||||
|
||||
<build type="c-source" value="AudioInput.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="AudioInput.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="module-config" subtype="required-header-file" value="AppConfig.h"/> |
||||
<build type="header-file" value="Config/AppConfig.h"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.adc"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.buttons"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,50 +1,50 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Audio Output Device Demo (Class Driver APIs)" id="lufa.demos.device.class.audio_output.example.avr8"> |
||||
<require idref="lufa.demos.device.class.audio_output"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.class.audio_output" caption="Audio Output Device Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Audio 1.0 Output device demo, implementing a basic USB speaker. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="Audio Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="AudioOutput.txt"/> |
||||
|
||||
<build type="c-source" value="AudioOutput.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="AudioOutput.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="module-config" subtype="required-header-file" value="AppConfig.h"/> |
||||
<build type="header-file" value="Config/AppConfig.h"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Audio Output Device Demo (Class Driver APIs)" id="lufa.demos.device.class.audio_output.example.avr8"> |
||||
<require idref="lufa.demos.device.class.audio_output"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.class.audio_output" caption="Audio Output Device Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Audio 1.0 Output device demo, implementing a basic USB speaker. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="Audio Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="AudioOutput.txt"/> |
||||
|
||||
<build type="c-source" value="AudioOutput.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="AudioOutput.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="module-config" subtype="required-header-file" value="AppConfig.h"/> |
||||
<build type="header-file" value="Config/AppConfig.h"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,62 +1,62 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Dual Virtual Serial Device Demo (Class Driver APIs)" id="lufa.demos.device.class.dual_cdc.example.avr8"> |
||||
<require idref="lufa.demos.device.class.dual_cdc"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="Dual Virtual Serial Device Demo (Class Driver APIs)" id="lufa.demos.device.class.dual_cdc.example.xmega"> |
||||
<require idref="lufa.demos.device.class.dual_cdc"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atxmega128a1u"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.class.dual_cdc" caption="Dual Virtual Serial Device Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Dual Virtual Serial (CDC) demo, implementing a pair of virtual serial port interfaces. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="CDC Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="DualVirtualSerial.txt"/> |
||||
<build type="distribute" subtype="user-file" value="LUFA DualVirtualSerial.inf"/> |
||||
|
||||
<build type="c-source" value="DualVirtualSerial.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="DualVirtualSerial.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.joystick"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Dual Virtual Serial Device Demo (Class Driver APIs)" id="lufa.demos.device.class.dual_cdc.example.avr8"> |
||||
<require idref="lufa.demos.device.class.dual_cdc"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="Dual Virtual Serial Device Demo (Class Driver APIs)" id="lufa.demos.device.class.dual_cdc.example.xmega"> |
||||
<require idref="lufa.demos.device.class.dual_cdc"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atxmega128a1u"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.class.dual_cdc" caption="Dual Virtual Serial Device Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Dual Virtual Serial (CDC) demo, implementing a pair of virtual serial port interfaces. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="CDC Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="DualVirtualSerial.txt"/> |
||||
<build type="distribute" subtype="user-file" value="LUFA DualVirtualSerial.inf"/> |
||||
|
||||
<build type="c-source" value="DualVirtualSerial.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="DualVirtualSerial.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.joystick"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,63 +1,63 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Generic HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.generic_hid.example.avr8"> |
||||
<require idref="lufa.demos.device.class.generic_hid"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="Generic HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.generic_hid.example.xmega"> |
||||
<require idref="lufa.demos.device.class.generic_hid"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atxmega128a1u"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.class.generic_hid" caption="Generic HID Device Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Generic HID device demo, implementing a device whose LEDs can be controlled via HID messages from the host. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="HID Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="GenericHID.txt"/> |
||||
<build type="distribute" subtype="directory" value="HostTestApp"/> |
||||
|
||||
<build type="c-source" value="GenericHID.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="GenericHID.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="module-config" subtype="required-header-file" value="AppConfig.h"/> |
||||
<build type="header-file" value="Config/AppConfig.h"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Generic HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.generic_hid.example.avr8"> |
||||
<require idref="lufa.demos.device.class.generic_hid"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="Generic HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.generic_hid.example.xmega"> |
||||
<require idref="lufa.demos.device.class.generic_hid"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atxmega128a1u"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.class.generic_hid" caption="Generic HID Device Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Generic HID device demo, implementing a device whose LEDs can be controlled via HID messages from the host. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="HID Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="GenericHID.txt"/> |
||||
<build type="distribute" subtype="directory" value="HostTestApp"/> |
||||
|
||||
<build type="c-source" value="GenericHID.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="GenericHID.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="module-config" subtype="required-header-file" value="AppConfig.h"/> |
||||
<build type="header-file" value="Config/AppConfig.h"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,62 +1,62 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Joystick HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.joystick.example.avr8"> |
||||
<require idref="lufa.demos.device.class.joystick"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="Joystick HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.joystick.example.xmega"> |
||||
<require idref="lufa.demos.device.class.joystick"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atxmega128a1u"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.class.joystick" caption="Joystick HID Device Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Joystick HID device demo, implementing a basic USB joystick that can send movement information to the host. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="HID Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="Joystick.txt"/> |
||||
|
||||
<build type="c-source" value="Joystick.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="Joystick.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.buttons"/> |
||||
<require idref="lufa.drivers.board.joystick"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Joystick HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.joystick.example.avr8"> |
||||
<require idref="lufa.demos.device.class.joystick"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="Joystick HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.joystick.example.xmega"> |
||||
<require idref="lufa.demos.device.class.joystick"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atxmega128a1u"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.class.joystick" caption="Joystick HID Device Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Joystick HID device demo, implementing a basic USB joystick that can send movement information to the host. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="HID Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="Joystick.txt"/> |
||||
|
||||
<build type="c-source" value="Joystick.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="Joystick.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.buttons"/> |
||||
<require idref="lufa.drivers.board.joystick"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,62 +1,62 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Keyboard HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.keyboard.example.avr8"> |
||||
<require idref="lufa.demos.device.class.keyboard"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="Keyboard HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.keyboard.example.xmega"> |
||||
<require idref="lufa.demos.device.class.keyboard"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atxmega128a1u"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.class.keyboard" caption="Keyboard HID Device Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Keyboard HID device demo, implementing a basic USB keyboard that can send key press information to the host. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="HID Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="Keyboard.txt"/> |
||||
|
||||
<build type="c-source" value="Keyboard.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="Keyboard.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.joystick"/> |
||||
<require idref="lufa.drivers.board.buttons"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Keyboard HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.keyboard.example.avr8"> |
||||
<require idref="lufa.demos.device.class.keyboard"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="Keyboard HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.keyboard.example.xmega"> |
||||
<require idref="lufa.demos.device.class.keyboard"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atxmega128a1u"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.class.keyboard" caption="Keyboard HID Device Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Keyboard HID device demo, implementing a basic USB keyboard that can send key press information to the host. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="HID Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="Keyboard.txt"/> |
||||
|
||||
<build type="c-source" value="Keyboard.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="Keyboard.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.joystick"/> |
||||
<require idref="lufa.drivers.board.buttons"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,62 +1,62 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Keyboard and Mouse HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.keyboard_mouse.example.avr8"> |
||||
<require idref="lufa.demos.device.class.keyboard_mouse"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="Keyboard and Mouse HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.keyboard_mouse.example.xmega"> |
||||
<require idref="lufa.demos.device.class.keyboard_mouse"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atxmega128a1u"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.class.keyboard_mouse" caption="Keyboard and Mouse HID Device Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Keyboard and Mouse HID device demo, implementing a basic USB keyboard and mouse using a pair of HID interfaces. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="HID Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="KeyboardMouse.txt"/> |
||||
|
||||
<build type="c-source" value="KeyboardMouse.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="KeyboardMouse.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.joystick"/> |
||||
<require idref="lufa.drivers.board.buttons"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Keyboard and Mouse HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.keyboard_mouse.example.avr8"> |
||||
<require idref="lufa.demos.device.class.keyboard_mouse"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="Keyboard and Mouse HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.keyboard_mouse.example.xmega"> |
||||
<require idref="lufa.demos.device.class.keyboard_mouse"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atxmega128a1u"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.class.keyboard_mouse" caption="Keyboard and Mouse HID Device Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Keyboard and Mouse HID device demo, implementing a basic USB keyboard and mouse using a pair of HID interfaces. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="HID Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="KeyboardMouse.txt"/> |
||||
|
||||
<build type="c-source" value="KeyboardMouse.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="KeyboardMouse.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.joystick"/> |
||||
<require idref="lufa.drivers.board.buttons"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,61 +1,61 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Keyboard and Mouse HID (Multi Report) Device Demo (Class Driver APIs)" id="lufa.demos.device.class.keyboard_mouse_mr.example.avr8"> |
||||
<require idref="lufa.demos.device.class.keyboard_mouse_mr"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="Keyboard and Mouse HID (Multi Report) Device Demo (Class Driver APIs)" id="lufa.demos.device.class.keyboard_mouse_mr.example.xmega"> |
||||
<require idref="lufa.demos.device.class.keyboard_mouse_mr"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atxmega128a1u"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.class.keyboard_mouse_mr" caption="Keyboard and Mouse HID (Multi Report) Device Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Keyboard and Mouse HID device demo, implementing a basic USB keyboard and mouse using a single HID interface and multiple logical reports. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="HID Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="KeyboardMouseMultiReport.txt"/> |
||||
|
||||
<build type="c-source" value="KeyboardMouseMultiReport.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="KeyboardMouseMultiReport.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.joystick"/> |
||||
<require idref="lufa.drivers.board.buttons"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Keyboard and Mouse HID (Multi Report) Device Demo (Class Driver APIs)" id="lufa.demos.device.class.keyboard_mouse_mr.example.avr8"> |
||||
<require idref="lufa.demos.device.class.keyboard_mouse_mr"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="Keyboard and Mouse HID (Multi Report) Device Demo (Class Driver APIs)" id="lufa.demos.device.class.keyboard_mouse_mr.example.xmega"> |
||||
<require idref="lufa.demos.device.class.keyboard_mouse_mr"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atxmega128a1u"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.class.keyboard_mouse_mr" caption="Keyboard and Mouse HID (Multi Report) Device Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Keyboard and Mouse HID device demo, implementing a basic USB keyboard and mouse using a single HID interface and multiple logical reports. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="HID Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="KeyboardMouseMultiReport.txt"/> |
||||
|
||||
<build type="c-source" value="KeyboardMouseMultiReport.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="KeyboardMouseMultiReport.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.joystick"/> |
||||
<require idref="lufa.drivers.board.buttons"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,62 +1,62 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="MIDI Device Demo (Class Driver APIs)" id="lufa.demos.device.class.midi.example.avr8"> |
||||
<require idref="lufa.demos.device.class.midi"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="MIDI Device Demo (Class Driver APIs)" id="lufa.demos.device.class.midi.example.xmega"> |
||||
<require idref="lufa.demos.device.class.midi"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atxmega128a1u"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.class.midi" caption="MIDI Device Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
MIDI device demo, implementing a basic USB MIDI device that can send messages to the host. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="MIDI Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="MIDI.txt"/> |
||||
|
||||
<build type="c-source" value="MIDI.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="MIDI.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.buttons"/> |
||||
<require idref="lufa.drivers.board.joystick"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="MIDI Device Demo (Class Driver APIs)" id="lufa.demos.device.class.midi.example.avr8"> |
||||
<require idref="lufa.demos.device.class.midi"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="MIDI Device Demo (Class Driver APIs)" id="lufa.demos.device.class.midi.example.xmega"> |
||||
<require idref="lufa.demos.device.class.midi"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atxmega128a1u"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.class.midi" caption="MIDI Device Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
MIDI device demo, implementing a basic USB MIDI device that can send messages to the host. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="MIDI Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="MIDI.txt"/> |
||||
|
||||
<build type="c-source" value="MIDI.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="MIDI.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.buttons"/> |
||||
<require idref="lufa.drivers.board.joystick"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,67 +1,67 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Mass Storage Device Demo (Class Driver APIs)" id="lufa.demos.device.class.mass_storage.example.avr8"> |
||||
<require idref="lufa.demos.device.class.mass_storage"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="Mass Storage Device Demo (Class Driver APIs)" id="lufa.demos.device.class.mass_storage.example.xmega"> |
||||
<require idref="lufa.demos.device.class.mass_storage"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atxmega128a1u"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.class.mass_storage" caption="Mass Storage Device Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Mass Storage device demo, implementing a basic USB storage disk using a Dataflash memory IC. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="Mass Storage Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="MassStorage.txt"/> |
||||
|
||||
<build type="c-source" value="MassStorage.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="c-source" value="Lib/DataflashManager.c"/> |
||||
<build type="c-source" value="Lib/SCSI.c"/> |
||||
<build type="header-file" value="MassStorage.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
<build type="header-file" value="Lib/DataflashManager.h"/> |
||||
<build type="header-file" value="Lib/SCSI.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="module-config" subtype="required-header-file" value="AppConfig.h"/> |
||||
<build type="header-file" value="Config/AppConfig.h"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.dataflash"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Mass Storage Device Demo (Class Driver APIs)" id="lufa.demos.device.class.mass_storage.example.avr8"> |
||||
<require idref="lufa.demos.device.class.mass_storage"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="Mass Storage Device Demo (Class Driver APIs)" id="lufa.demos.device.class.mass_storage.example.xmega"> |
||||
<require idref="lufa.demos.device.class.mass_storage"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atxmega128a1u"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.class.mass_storage" caption="Mass Storage Device Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Mass Storage device demo, implementing a basic USB storage disk using a Dataflash memory IC. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="Mass Storage Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="MassStorage.txt"/> |
||||
|
||||
<build type="c-source" value="MassStorage.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="c-source" value="Lib/DataflashManager.c"/> |
||||
<build type="c-source" value="Lib/SCSI.c"/> |
||||
<build type="header-file" value="MassStorage.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
<build type="header-file" value="Lib/DataflashManager.h"/> |
||||
<build type="header-file" value="Lib/SCSI.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="module-config" subtype="required-header-file" value="AppConfig.h"/> |
||||
<build type="header-file" value="Config/AppConfig.h"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.dataflash"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,70 +1,70 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Mass Storage and HID Keyboard Device Demo (Class Driver APIs)" id="lufa.demos.device.class.mass_storage_keyboard.example.avr8"> |
||||
<require idref="lufa.demos.device.class.mass_storage_keyboard"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="Mass Storage and HID Keyboard Device Demo (Class Driver APIs)" id="lufa.demos.device.class.mass_storage_keyboard.example.xmega"> |
||||
<require idref="lufa.demos.device.class.mass_storage_keyboard"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atxmega128a1u"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.class.mass_storage_keyboard" caption="Mass Storage and HID Keyboard Device Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Mass Storage and Keyboard device demo, implementing a basic USB storage disk using a Dataflash memory IC, and a basic HID keyboard. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="HID Class"/> |
||||
<keyword value="Mass Storage Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="MassStorageKeyboard.txt"/> |
||||
|
||||
<build type="c-source" value="MassStorageKeyboard.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="c-source" value="Lib/DataflashManager.c"/> |
||||
<build type="c-source" value="Lib/SCSI.c"/> |
||||
<build type="header-file" value="MassStorageKeyboard.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
<build type="header-file" value="Lib/DataflashManager.h"/> |
||||
<build type="header-file" value="Lib/SCSI.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="module-config" subtype="required-header-file" value="AppConfig.h"/> |
||||
<build type="header-file" value="Config/AppConfig.h"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.buttons"/> |
||||
<require idref="lufa.drivers.board.joystick"/> |
||||
<require idref="lufa.drivers.board.dataflash"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Mass Storage and HID Keyboard Device Demo (Class Driver APIs)" id="lufa.demos.device.class.mass_storage_keyboard.example.avr8"> |
||||
<require idref="lufa.demos.device.class.mass_storage_keyboard"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="Mass Storage and HID Keyboard Device Demo (Class Driver APIs)" id="lufa.demos.device.class.mass_storage_keyboard.example.xmega"> |
||||
<require idref="lufa.demos.device.class.mass_storage_keyboard"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atxmega128a1u"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.class.mass_storage_keyboard" caption="Mass Storage and HID Keyboard Device Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Mass Storage and Keyboard device demo, implementing a basic USB storage disk using a Dataflash memory IC, and a basic HID keyboard. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="HID Class"/> |
||||
<keyword value="Mass Storage Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="MassStorageKeyboard.txt"/> |
||||
|
||||
<build type="c-source" value="MassStorageKeyboard.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="c-source" value="Lib/DataflashManager.c"/> |
||||
<build type="c-source" value="Lib/SCSI.c"/> |
||||
<build type="header-file" value="MassStorageKeyboard.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
<build type="header-file" value="Lib/DataflashManager.h"/> |
||||
<build type="header-file" value="Lib/SCSI.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="module-config" subtype="required-header-file" value="AppConfig.h"/> |
||||
<build type="header-file" value="Config/AppConfig.h"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.buttons"/> |
||||
<require idref="lufa.drivers.board.joystick"/> |
||||
<require idref="lufa.drivers.board.dataflash"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,62 +1,62 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Mouse HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.mouse.example.avr8"> |
||||
<require idref="lufa.demos.device.class.mouse"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="Mouse HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.mouse.example.xmega"> |
||||
<require idref="lufa.demos.device.class.mouse"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atxmega128a1u"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.class.mouse" caption="Mouse HID Device Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Mouse device demo, implementing a basic USB mouse device that can send movement information to the host. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="HID Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="Mouse.txt"/> |
||||
|
||||
<build type="c-source" value="Mouse.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="Mouse.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.buttons"/> |
||||
<require idref="lufa.drivers.board.joystick"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Mouse HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.mouse.example.avr8"> |
||||
<require idref="lufa.demos.device.class.mouse"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="Mouse HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.mouse.example.xmega"> |
||||
<require idref="lufa.demos.device.class.mouse"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atxmega128a1u"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.class.mouse" caption="Mouse HID Device Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Mouse device demo, implementing a basic USB mouse device that can send movement information to the host. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="HID Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="Mouse.txt"/> |
||||
|
||||
<build type="c-source" value="Mouse.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="Mouse.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.buttons"/> |
||||
<require idref="lufa.drivers.board.joystick"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,84 +1,84 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="RNDIS Ethernet Device Demo (Class Driver APIs)" id="lufa.demos.device.class.rndis.example.avr8"> |
||||
<require idref="lufa.demos.device.class.rndis"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="RNDIS Ethernet Device Demo (Class Driver APIs)" id="lufa.demos.device.class.rndis.example.xmega"> |
||||
<require idref="lufa.demos.device.class.rndis"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atxmega128a1u"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.class.rndis" caption="RNDIS Ethernet Device Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Microsoft RNDIS Ethernet networking device demo, implementing a basic HTTP webserver. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="RNDIS Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="RNDISEthernet.txt"/> |
||||
<build type="distribute" subtype="user-file" value="LUFA RNDIS.inf"/> |
||||
|
||||
<build type="c-source" value="RNDISEthernet.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="c-source" value="Lib/ARP.c"/> |
||||
<build type="c-source" value="Lib/DHCP.c"/> |
||||
<build type="c-source" value="Lib/Ethernet.c"/> |
||||
<build type="c-source" value="Lib/ICMP.c"/> |
||||
<build type="c-source" value="Lib/IP.c"/> |
||||
<build type="c-source" value="Lib/ProtocolDecoders.c"/> |
||||
<build type="c-source" value="Lib/TCP.c"/> |
||||
<build type="c-source" value="Lib/UDP.c"/> |
||||
<build type="c-source" value="Lib/Webserver.c"/> |
||||
<build type="header-file" value="RNDISEthernet.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
<build type="header-file" value="Lib/ARP.h"/> |
||||
<build type="header-file" value="Lib/DHCP.h"/> |
||||
<build type="header-file" value="Lib/Ethernet.h"/> |
||||
<build type="header-file" value="Lib/ICMP.h"/> |
||||
<build type="header-file" value="Lib/IP.h"/> |
||||
<build type="header-file" value="Lib/ProtocolDecoders.h"/> |
||||
<build type="header-file" value="Lib/TCP.h"/> |
||||
<build type="header-file" value="Lib/UDP.h"/> |
||||
<build type="header-file" value="Lib/Webserver.h"/> |
||||
<build type="header-file" value="Lib/EthernetProtocols.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="module-config" subtype="required-header-file" value="AppConfig.h"/> |
||||
<build type="header-file" value="Config/AppConfig.h"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="RNDIS Ethernet Device Demo (Class Driver APIs)" id="lufa.demos.device.class.rndis.example.avr8"> |
||||
<require idref="lufa.demos.device.class.rndis"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="RNDIS Ethernet Device Demo (Class Driver APIs)" id="lufa.demos.device.class.rndis.example.xmega"> |
||||
<require idref="lufa.demos.device.class.rndis"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atxmega128a1u"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.class.rndis" caption="RNDIS Ethernet Device Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Microsoft RNDIS Ethernet networking device demo, implementing a basic HTTP webserver. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="RNDIS Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="RNDISEthernet.txt"/> |
||||
<build type="distribute" subtype="user-file" value="LUFA RNDIS.inf"/> |
||||
|
||||
<build type="c-source" value="RNDISEthernet.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="c-source" value="Lib/ARP.c"/> |
||||
<build type="c-source" value="Lib/DHCP.c"/> |
||||
<build type="c-source" value="Lib/Ethernet.c"/> |
||||
<build type="c-source" value="Lib/ICMP.c"/> |
||||
<build type="c-source" value="Lib/IP.c"/> |
||||
<build type="c-source" value="Lib/ProtocolDecoders.c"/> |
||||
<build type="c-source" value="Lib/TCP.c"/> |
||||
<build type="c-source" value="Lib/UDP.c"/> |
||||
<build type="c-source" value="Lib/Webserver.c"/> |
||||
<build type="header-file" value="RNDISEthernet.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
<build type="header-file" value="Lib/ARP.h"/> |
||||
<build type="header-file" value="Lib/DHCP.h"/> |
||||
<build type="header-file" value="Lib/Ethernet.h"/> |
||||
<build type="header-file" value="Lib/ICMP.h"/> |
||||
<build type="header-file" value="Lib/IP.h"/> |
||||
<build type="header-file" value="Lib/ProtocolDecoders.h"/> |
||||
<build type="header-file" value="Lib/TCP.h"/> |
||||
<build type="header-file" value="Lib/UDP.h"/> |
||||
<build type="header-file" value="Lib/Webserver.h"/> |
||||
<build type="header-file" value="Lib/EthernetProtocols.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="module-config" subtype="required-header-file" value="AppConfig.h"/> |
||||
<build type="header-file" value="Config/AppConfig.h"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,62 +1,62 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Virtual Serial CDC Device Demo (Class Driver APIs)" id="lufa.demos.device.class.cdc.example.avr8"> |
||||
<require idref="lufa.demos.device.class.cdc"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="Virtual Serial CDC Device Demo (Class Driver APIs)" id="lufa.demos.device.class.cdc.example.xmega"> |
||||
<require idref="lufa.demos.device.class.cdc"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atxmega128a1u"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.class.cdc" caption="Virtual Serial CDC Device Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Virtual Serial device demo, implementing a virtual serial channel between the host PC and the device. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="CDC Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="VirtualSerial.txt"/> |
||||
<build type="distribute" subtype="user-file" value="LUFA VirtualSerial.inf"/> |
||||
|
||||
<build type="c-source" value="VirtualSerial.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="VirtualSerial.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.joystick"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Virtual Serial CDC Device Demo (Class Driver APIs)" id="lufa.demos.device.class.cdc.example.avr8"> |
||||
<require idref="lufa.demos.device.class.cdc"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="Virtual Serial CDC Device Demo (Class Driver APIs)" id="lufa.demos.device.class.cdc.example.xmega"> |
||||
<require idref="lufa.demos.device.class.cdc"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atxmega128a1u"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.class.cdc" caption="Virtual Serial CDC Device Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Virtual Serial device demo, implementing a virtual serial channel between the host PC and the device. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="CDC Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="VirtualSerial.txt"/> |
||||
<build type="distribute" subtype="user-file" value="LUFA VirtualSerial.inf"/> |
||||
|
||||
<build type="c-source" value="VirtualSerial.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="VirtualSerial.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.joystick"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,70 +1,70 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Virtual Serial CDC and Mass Storage Device Demo (Class Driver APIs)" id="lufa.demos.device.class.cdc_ms.example.avr8"> |
||||
<require idref="lufa.demos.device.class.cdc_ms"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="Virtual Serial CDC and Mass Storage Device Demo (Class Driver APIs)" id="lufa.demos.device.class.cdc_ms.example.xmega"> |
||||
<require idref="lufa.demos.device.class.cdc_ms"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atxmega128a1u"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.class.cdc_ms" caption="Virtual Serial CDC and Mass Storage Device Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Virtual Serial and Mass Storage device demo, implementing a virtual serial channel between the host PC and the device, and a basic USB storage disk using a Dataflash memory IC. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="CDC Class"/> |
||||
<keyword value="Mass Storage Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="VirtualSerialMassStorage.txt"/> |
||||
<build type="distribute" subtype="user-file" value="LUFA VirtualSerialMassStorage.inf"/> |
||||
|
||||
<build type="c-source" value="VirtualSerialMassStorage.c"/> |
||||
<build type="c-source" value="Lib/DataflashManager.c"/> |
||||
<build type="c-source" value="Lib/SCSI.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="VirtualSerialMassStorage.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
<build type="header-file" value="Lib/DataflashManager.h"/> |
||||
<build type="header-file" value="Lib/SCSI.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="module-config" subtype="required-header-file" value="AppConfig.h"/> |
||||
<build type="header-file" value="Config/AppConfig.h"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.joystick"/> |
||||
<require idref="lufa.drivers.board.dataflash"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Virtual Serial CDC and Mass Storage Device Demo (Class Driver APIs)" id="lufa.demos.device.class.cdc_ms.example.avr8"> |
||||
<require idref="lufa.demos.device.class.cdc_ms"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="Virtual Serial CDC and Mass Storage Device Demo (Class Driver APIs)" id="lufa.demos.device.class.cdc_ms.example.xmega"> |
||||
<require idref="lufa.demos.device.class.cdc_ms"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atxmega128a1u"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.class.cdc_ms" caption="Virtual Serial CDC and Mass Storage Device Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Virtual Serial and Mass Storage device demo, implementing a virtual serial channel between the host PC and the device, and a basic USB storage disk using a Dataflash memory IC. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="CDC Class"/> |
||||
<keyword value="Mass Storage Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="VirtualSerialMassStorage.txt"/> |
||||
<build type="distribute" subtype="user-file" value="LUFA VirtualSerialMassStorage.inf"/> |
||||
|
||||
<build type="c-source" value="VirtualSerialMassStorage.c"/> |
||||
<build type="c-source" value="Lib/DataflashManager.c"/> |
||||
<build type="c-source" value="Lib/SCSI.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="VirtualSerialMassStorage.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
<build type="header-file" value="Lib/DataflashManager.h"/> |
||||
<build type="header-file" value="Lib/SCSI.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="module-config" subtype="required-header-file" value="AppConfig.h"/> |
||||
<build type="header-file" value="Config/AppConfig.h"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.joystick"/> |
||||
<require idref="lufa.drivers.board.dataflash"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,64 +1,64 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Virtual Serial CDC and Mouse HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.cdc_mouse.example.avr8"> |
||||
<require idref="lufa.demos.device.class.cdc_mouse"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="Virtual Serial CDC and Mouse HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.cdc_mouse.example.xmega"> |
||||
<require idref="lufa.demos.device.class.cdc_mouse"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atxmega128a1u"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.class.cdc_mouse" caption="Virtual Serial CDC and Mouse HID Device Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Virtual Serial and Mouse device demo, implementing a virtual serial channel between the host PC and the device, and a USB mouse. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="CDC Class"/> |
||||
<keyword value="HID Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="VirtualSerialMouse.txt"/> |
||||
<build type="distribute" subtype="user-file" value="LUFA VirtualSerialMouse.inf"/> |
||||
|
||||
<build type="c-source" value="VirtualSerialMouse.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="VirtualSerialMouse.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.buttons"/> |
||||
<require idref="lufa.drivers.board.joystick"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Virtual Serial CDC and Mouse HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.cdc_mouse.example.avr8"> |
||||
<require idref="lufa.demos.device.class.cdc_mouse"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="Virtual Serial CDC and Mouse HID Device Demo (Class Driver APIs)" id="lufa.demos.device.class.cdc_mouse.example.xmega"> |
||||
<require idref="lufa.demos.device.class.cdc_mouse"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atxmega128a1u"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.class.cdc_mouse" caption="Virtual Serial CDC and Mouse HID Device Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Virtual Serial and Mouse device demo, implementing a virtual serial channel between the host PC and the device, and a USB mouse. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="CDC Class"/> |
||||
<keyword value="HID Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="VirtualSerialMouse.txt"/> |
||||
<build type="distribute" subtype="user-file" value="LUFA VirtualSerialMouse.inf"/> |
||||
|
||||
<build type="c-source" value="VirtualSerialMouse.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="VirtualSerialMouse.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.buttons"/> |
||||
<require idref="lufa.drivers.board.joystick"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,52 +1,52 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Audio Input Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.audio_input.example.avr8"> |
||||
<require idref="lufa.demos.device.lowlevel.audio_input"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.lowlevel.audio_input" caption="Audio Input Device Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Audio 1.0 Input device demo, implementing a basic USB microphone. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="Audio Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="AudioInput.txt"/> |
||||
|
||||
<build type="c-source" value="AudioInput.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="AudioInput.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="module-config" subtype="required-header-file" value="AppConfig.h"/> |
||||
<build type="header-file" value="Config/AppConfig.h"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.adc"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.buttons"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Audio Input Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.audio_input.example.avr8"> |
||||
<require idref="lufa.demos.device.lowlevel.audio_input"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.lowlevel.audio_input" caption="Audio Input Device Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Audio 1.0 Input device demo, implementing a basic USB microphone. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="Audio Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="AudioInput.txt"/> |
||||
|
||||
<build type="c-source" value="AudioInput.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="AudioInput.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="module-config" subtype="required-header-file" value="AppConfig.h"/> |
||||
<build type="header-file" value="Config/AppConfig.h"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.adc"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.buttons"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,51 +1,51 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Audio Output Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.audio_output.example.avr8"> |
||||
<require idref="lufa.demos.device.lowlevel.audio_output"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.lowlevel.audio_output" caption="Audio Output Device Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Audio 1.0 Output device demo, implementing a basic USB speaker. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="Audio Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="AudioOutput.txt"/> |
||||
|
||||
<build type="c-source" value="AudioOutput.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="AudioOutput.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="module-config" subtype="required-header-file" value="AppConfig.h"/> |
||||
<build type="header-file" value="Config/AppConfig.h"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.buttons"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Audio Output Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.audio_output.example.avr8"> |
||||
<require idref="lufa.demos.device.lowlevel.audio_output"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.lowlevel.audio_output" caption="Audio Output Device Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Audio 1.0 Output device demo, implementing a basic USB speaker. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="Audio Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="AudioOutput.txt"/> |
||||
|
||||
<build type="c-source" value="AudioOutput.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="AudioOutput.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="module-config" subtype="required-header-file" value="AppConfig.h"/> |
||||
<build type="header-file" value="Config/AppConfig.h"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.buttons"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,62 +1,62 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Dual Virtual Serial Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.dual_cdc.example.avr8"> |
||||
<require idref="lufa.demos.device.lowlevel.dual_cdc"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="Dual Virtual Serial Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.dual_cdc.example.xmega"> |
||||
<require idref="lufa.demos.device.lowlevel.dual_cdc"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atxmega128a1u"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.lowlevel.dual_cdc" caption="Dual Virtual Serial Device Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Dual Virtual Serial (CDC) demo, implementing a pair of virtual serial port interfaces. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="CDC Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="DualVirtualSerial.txt"/> |
||||
<build type="distribute" subtype="user-file" value="LUFA DualVirtualSerial.inf"/> |
||||
|
||||
<build type="c-source" value="DualVirtualSerial.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="DualVirtualSerial.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.joystick"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Dual Virtual Serial Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.dual_cdc.example.avr8"> |
||||
<require idref="lufa.demos.device.lowlevel.dual_cdc"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="Dual Virtual Serial Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.dual_cdc.example.xmega"> |
||||
<require idref="lufa.demos.device.lowlevel.dual_cdc"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atxmega128a1u"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.lowlevel.dual_cdc" caption="Dual Virtual Serial Device Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Dual Virtual Serial (CDC) demo, implementing a pair of virtual serial port interfaces. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="CDC Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="DualVirtualSerial.txt"/> |
||||
<build type="distribute" subtype="user-file" value="LUFA DualVirtualSerial.inf"/> |
||||
|
||||
<build type="c-source" value="DualVirtualSerial.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="DualVirtualSerial.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.joystick"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,63 +1,63 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Generic HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.generic_hid.example.avr8"> |
||||
<require idref="lufa.demos.device.lowlevel.generic_hid"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="Generic HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.generic_hid.example.xmega"> |
||||
<require idref="lufa.demos.device.lowlevel.generic_hid"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atxmega128a1u"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.lowlevel.generic_hid" caption="Generic HID Device Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Generic HID device demo, implementing a device whose LEDs can be controlled via HID messages from the host. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="HID Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="GenericHID.txt"/> |
||||
<build type="distribute" subtype="directory" value="HostTestApp"/> |
||||
|
||||
<build type="c-source" value="GenericHID.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="GenericHID.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="module-config" subtype="required-header-file" value="AppConfig.h"/> |
||||
<build type="header-file" value="Config/AppConfig.h"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Generic HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.generic_hid.example.avr8"> |
||||
<require idref="lufa.demos.device.lowlevel.generic_hid"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="Generic HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.generic_hid.example.xmega"> |
||||
<require idref="lufa.demos.device.lowlevel.generic_hid"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atxmega128a1u"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.lowlevel.generic_hid" caption="Generic HID Device Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Generic HID device demo, implementing a device whose LEDs can be controlled via HID messages from the host. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="HID Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="GenericHID.txt"/> |
||||
<build type="distribute" subtype="directory" value="HostTestApp"/> |
||||
|
||||
<build type="c-source" value="GenericHID.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="GenericHID.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="module-config" subtype="required-header-file" value="AppConfig.h"/> |
||||
<build type="header-file" value="Config/AppConfig.h"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,62 +1,62 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Joystick HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.joystick.example.avr8"> |
||||
<require idref="lufa.demos.device.lowlevel.joystick"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="Joystick HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.joystick.example.xmega"> |
||||
<require idref="lufa.demos.device.lowlevel.joystick"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atxmega128a1u"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.lowlevel.joystick" caption="Joystick HID Device Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Joystick HID device demo, implementing a basic USB joystick that can send movement information to the host. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="HID Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="Joystick.txt"/> |
||||
|
||||
<build type="c-source" value="Joystick.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="Joystick.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.buttons"/> |
||||
<require idref="lufa.drivers.board.joystick"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Joystick HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.joystick.example.avr8"> |
||||
<require idref="lufa.demos.device.lowlevel.joystick"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="Joystick HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.joystick.example.xmega"> |
||||
<require idref="lufa.demos.device.lowlevel.joystick"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atxmega128a1u"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.lowlevel.joystick" caption="Joystick HID Device Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Joystick HID device demo, implementing a basic USB joystick that can send movement information to the host. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="HID Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="Joystick.txt"/> |
||||
|
||||
<build type="c-source" value="Joystick.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="Joystick.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.buttons"/> |
||||
<require idref="lufa.drivers.board.joystick"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,62 +1,62 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Keyboard HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.keyboard.example.avr8"> |
||||
<require idref="lufa.demos.device.lowlevel.keyboard"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="Keyboard HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.keyboard.example.xmega"> |
||||
<require idref="lufa.demos.device.lowlevel.keyboard"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atxmega128a1u"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.lowlevel.keyboard" caption="Keyboard HID Device Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Keyboard HID device demo, implementing a basic USB keyboard that can send key press information to the host. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="HID Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="Keyboard.txt"/> |
||||
|
||||
<build type="c-source" value="Keyboard.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="Keyboard.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.joystick"/> |
||||
<require idref="lufa.drivers.board.buttons"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Keyboard HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.keyboard.example.avr8"> |
||||
<require idref="lufa.demos.device.lowlevel.keyboard"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="Keyboard HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.keyboard.example.xmega"> |
||||
<require idref="lufa.demos.device.lowlevel.keyboard"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atxmega128a1u"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.lowlevel.keyboard" caption="Keyboard HID Device Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Keyboard HID device demo, implementing a basic USB keyboard that can send key press information to the host. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="HID Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="Keyboard.txt"/> |
||||
|
||||
<build type="c-source" value="Keyboard.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="Keyboard.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.joystick"/> |
||||
<require idref="lufa.drivers.board.buttons"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,62 +1,62 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Keyboard and Mouse HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.keyboard_mouse.example.avr8"> |
||||
<require idref="lufa.demos.device.lowlevel.keyboard_mouse"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="Keyboard and Mouse HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.keyboard_mouse.example.xmega"> |
||||
<require idref="lufa.demos.device.lowlevel.keyboard_mouse"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atxmega128a1u"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.lowlevel.keyboard_mouse" caption="Keyboard and Mouse HID Device Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Keyboard and Mouse HID device demo, implementing a basic USB keyboard and mouse using a pair of HID interfaces. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="HID Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="KeyboardMouse.txt"/> |
||||
|
||||
<build type="c-source" value="KeyboardMouse.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="KeyboardMouse.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.joystick"/> |
||||
<require idref="lufa.drivers.board.buttons"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Keyboard and Mouse HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.keyboard_mouse.example.avr8"> |
||||
<require idref="lufa.demos.device.lowlevel.keyboard_mouse"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="Keyboard and Mouse HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.keyboard_mouse.example.xmega"> |
||||
<require idref="lufa.demos.device.lowlevel.keyboard_mouse"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atxmega128a1u"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.lowlevel.keyboard_mouse" caption="Keyboard and Mouse HID Device Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Keyboard and Mouse HID device demo, implementing a basic USB keyboard and mouse using a pair of HID interfaces. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="HID Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="KeyboardMouse.txt"/> |
||||
|
||||
<build type="c-source" value="KeyboardMouse.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="KeyboardMouse.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.joystick"/> |
||||
<require idref="lufa.drivers.board.buttons"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,62 +1,62 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="MIDI Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.midi.example.avr8"> |
||||
<require idref="lufa.demos.device.lowlevel.midi"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="MIDI Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.midi.example.xmega"> |
||||
<require idref="lufa.demos.device.lowlevel.midi"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atxmega128a1u"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.lowlevel.midi" caption="MIDI Device Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
MIDI device demo, implementing a basic USB MIDI device that can send messages to the host. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="MIDI Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="MIDI.txt"/> |
||||
|
||||
<build type="c-source" value="MIDI.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="MIDI.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.buttons"/> |
||||
<require idref="lufa.drivers.board.joystick"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="MIDI Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.midi.example.avr8"> |
||||
<require idref="lufa.demos.device.lowlevel.midi"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="MIDI Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.midi.example.xmega"> |
||||
<require idref="lufa.demos.device.lowlevel.midi"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atxmega128a1u"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.lowlevel.midi" caption="MIDI Device Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
MIDI device demo, implementing a basic USB MIDI device that can send messages to the host. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="MIDI Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="MIDI.txt"/> |
||||
|
||||
<build type="c-source" value="MIDI.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="MIDI.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.buttons"/> |
||||
<require idref="lufa.drivers.board.joystick"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,67 +1,67 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Mass Storage Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.mass_storage.example.avr8"> |
||||
<require idref="lufa.demos.device.lowlevel.mass_storage"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="Mass Storage Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.mass_storage.example.xmega"> |
||||
<require idref="lufa.demos.device.lowlevel.mass_storage"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atxmega128a1u"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.lowlevel.mass_storage" caption="Mass Storage Device Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Mass Storage device demo, implementing a basic USB storage disk using a Dataflash memory IC. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="Mass Storage Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="MassStorage.txt"/> |
||||
|
||||
<build type="c-source" value="MassStorage.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="c-source" value="Lib/DataflashManager.c"/> |
||||
<build type="c-source" value="Lib/SCSI.c"/> |
||||
<build type="header-file" value="MassStorage.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
<build type="header-file" value="Lib/DataflashManager.h"/> |
||||
<build type="header-file" value="Lib/SCSI.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="module-config" subtype="required-header-file" value="AppConfig.h"/> |
||||
<build type="header-file" value="Config/AppConfig.h"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.dataflash"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Mass Storage Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.mass_storage.example.avr8"> |
||||
<require idref="lufa.demos.device.lowlevel.mass_storage"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="Mass Storage Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.mass_storage.example.xmega"> |
||||
<require idref="lufa.demos.device.lowlevel.mass_storage"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atxmega128a1u"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.lowlevel.mass_storage" caption="Mass Storage Device Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Mass Storage device demo, implementing a basic USB storage disk using a Dataflash memory IC. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="Mass Storage Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="MassStorage.txt"/> |
||||
|
||||
<build type="c-source" value="MassStorage.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="c-source" value="Lib/DataflashManager.c"/> |
||||
<build type="c-source" value="Lib/SCSI.c"/> |
||||
<build type="header-file" value="MassStorage.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
<build type="header-file" value="Lib/DataflashManager.h"/> |
||||
<build type="header-file" value="Lib/SCSI.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="module-config" subtype="required-header-file" value="AppConfig.h"/> |
||||
<build type="header-file" value="Config/AppConfig.h"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.dataflash"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,62 +1,62 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Mouse HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.mouse.example.avr8"> |
||||
<require idref="lufa.demos.device.lowlevel.mouse"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="Mouse HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.mouse.example.xmega"> |
||||
<require idref="lufa.demos.device.lowlevel.mouse"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atxmega128a1u"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.lowlevel.mouse" caption="Mouse HID Device Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Mouse device demo, implementing a basic USB mouse device that can send movement information to the host. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="HID Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="Mouse.txt"/> |
||||
|
||||
<build type="c-source" value="Mouse.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="Mouse.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.buttons"/> |
||||
<require idref="lufa.drivers.board.joystick"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Mouse HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.mouse.example.avr8"> |
||||
<require idref="lufa.demos.device.lowlevel.mouse"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="Mouse HID Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.mouse.example.xmega"> |
||||
<require idref="lufa.demos.device.lowlevel.mouse"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atxmega128a1u"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.lowlevel.mouse" caption="Mouse HID Device Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Mouse device demo, implementing a basic USB mouse device that can send movement information to the host. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="HID Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="Mouse.txt"/> |
||||
|
||||
<build type="c-source" value="Mouse.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="Mouse.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.buttons"/> |
||||
<require idref="lufa.drivers.board.joystick"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,86 +1,86 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="RNDIS Ethernet Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.rndis.example.avr8"> |
||||
<require idref="lufa.demos.device.lowlevel.rndis"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="RNDIS Ethernet Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.rndis.example.xmega"> |
||||
<require idref="lufa.demos.device.lowlevel.rndis"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atxmega128a1u"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.lowlevel.rndis" caption="RNDIS Ethernet Device Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Microsoft RNDIS Ethernet networking device demo, implementing a basic HTTP webserver. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="RNDIS Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="RNDISEthernet.txt"/> |
||||
<build type="distribute" subtype="user-file" value="LUFA RNDIS.inf"/> |
||||
|
||||
<build type="c-source" value="RNDISEthernet.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="c-source" value="Lib/ARP.c"/> |
||||
<build type="c-source" value="Lib/DHCP.c"/> |
||||
<build type="c-source" value="Lib/Ethernet.c"/> |
||||
<build type="c-source" value="Lib/ICMP.c"/> |
||||
<build type="c-source" value="Lib/IP.c"/> |
||||
<build type="c-source" value="Lib/ProtocolDecoders.c"/> |
||||
<build type="c-source" value="Lib/RNDIS.c"/> |
||||
<build type="c-source" value="Lib/TCP.c"/> |
||||
<build type="c-source" value="Lib/UDP.c"/> |
||||
<build type="c-source" value="Lib/Webserver.c"/> |
||||
<build type="header-file" value="RNDISEthernet.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
<build type="header-file" value="Lib/ARP.h"/> |
||||
<build type="header-file" value="Lib/DHCP.h"/> |
||||
<build type="header-file" value="Lib/Ethernet.h"/> |
||||
<build type="header-file" value="Lib/ICMP.h"/> |
||||
<build type="header-file" value="Lib/IP.h"/> |
||||
<build type="header-file" value="Lib/ProtocolDecoders.h"/> |
||||
<build type="header-file" value="Lib/RNDIS.h"/> |
||||
<build type="header-file" value="Lib/TCP.h"/> |
||||
<build type="header-file" value="Lib/UDP.h"/> |
||||
<build type="header-file" value="Lib/Webserver.h"/> |
||||
<build type="header-file" value="Lib/EthernetProtocols.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="module-config" subtype="required-header-file" value="AppConfig.h"/> |
||||
<build type="header-file" value="Config/AppConfig.h"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="RNDIS Ethernet Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.rndis.example.avr8"> |
||||
<require idref="lufa.demos.device.lowlevel.rndis"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="RNDIS Ethernet Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.rndis.example.xmega"> |
||||
<require idref="lufa.demos.device.lowlevel.rndis"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atxmega128a1u"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.lowlevel.rndis" caption="RNDIS Ethernet Device Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Microsoft RNDIS Ethernet networking device demo, implementing a basic HTTP webserver. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="RNDIS Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="RNDISEthernet.txt"/> |
||||
<build type="distribute" subtype="user-file" value="LUFA RNDIS.inf"/> |
||||
|
||||
<build type="c-source" value="RNDISEthernet.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="c-source" value="Lib/ARP.c"/> |
||||
<build type="c-source" value="Lib/DHCP.c"/> |
||||
<build type="c-source" value="Lib/Ethernet.c"/> |
||||
<build type="c-source" value="Lib/ICMP.c"/> |
||||
<build type="c-source" value="Lib/IP.c"/> |
||||
<build type="c-source" value="Lib/ProtocolDecoders.c"/> |
||||
<build type="c-source" value="Lib/RNDIS.c"/> |
||||
<build type="c-source" value="Lib/TCP.c"/> |
||||
<build type="c-source" value="Lib/UDP.c"/> |
||||
<build type="c-source" value="Lib/Webserver.c"/> |
||||
<build type="header-file" value="RNDISEthernet.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
<build type="header-file" value="Lib/ARP.h"/> |
||||
<build type="header-file" value="Lib/DHCP.h"/> |
||||
<build type="header-file" value="Lib/Ethernet.h"/> |
||||
<build type="header-file" value="Lib/ICMP.h"/> |
||||
<build type="header-file" value="Lib/IP.h"/> |
||||
<build type="header-file" value="Lib/ProtocolDecoders.h"/> |
||||
<build type="header-file" value="Lib/RNDIS.h"/> |
||||
<build type="header-file" value="Lib/TCP.h"/> |
||||
<build type="header-file" value="Lib/UDP.h"/> |
||||
<build type="header-file" value="Lib/Webserver.h"/> |
||||
<build type="header-file" value="Lib/EthernetProtocols.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="module-config" subtype="required-header-file" value="AppConfig.h"/> |
||||
<build type="header-file" value="Config/AppConfig.h"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,63 +1,63 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Virtual Serial CDC Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.cdc.example.avr8"> |
||||
<require idref="lufa.demos.device.lowlevel.cdc"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="Virtual Serial CDC Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.cdc.example.xmega"> |
||||
<require idref="lufa.demos.device.lowlevel.cdc"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atxmega128a1u"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.lowlevel.cdc" caption="Virtual Serial CDC Device Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Virtual Serial device demo, implementing a virtual serial channel between the host PC and the device. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="CDC Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="VirtualSerial.txt"/> |
||||
<build type="distribute" subtype="user-file" value="LUFA VirtualSerial.inf"/> |
||||
|
||||
<build type="c-source" value="VirtualSerial.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="VirtualSerial.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.buttons"/> |
||||
<require idref="lufa.drivers.board.joystick"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Virtual Serial CDC Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.cdc.example.avr8"> |
||||
<require idref="lufa.demos.device.lowlevel.cdc"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="Virtual Serial CDC Device Demo (Low Level APIs)" id="lufa.demos.device.lowlevel.cdc.example.xmega"> |
||||
<require idref="lufa.demos.device.lowlevel.cdc"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="atxmega128a1u"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.device.lowlevel.cdc" caption="Virtual Serial CDC Device Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Virtual Serial device demo, implementing a virtual serial channel between the host PC and the device. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="CDC Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="VirtualSerial.txt"/> |
||||
<build type="distribute" subtype="user-file" value="LUFA VirtualSerial.inf"/> |
||||
|
||||
<build type="c-source" value="VirtualSerial.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="VirtualSerial.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.buttons"/> |
||||
<require idref="lufa.drivers.board.joystick"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,56 +1,56 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Mouse HID Dual USB Mode Demo (Class Driver APIs)" id="lufa.demos.dualrole.class.mouse.example.avr8"> |
||||
<require idref="lufa.demos.dualrole.class.mouse"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.dualrole.class.mouse" caption="Mouse HID Dual USB Mode Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Mouse host and device dual role demo, implementing a basic mouse device and host. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Dual Role"/> |
||||
<keyword value="HID Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="MouseHostDevice.txt"/> |
||||
|
||||
<build type="c-source" value="MouseHostDevice.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="c-source" value="DeviceFunctions.c"/> |
||||
<build type="c-source" value="HostFunctions.c"/> |
||||
<build type="header-file" value="MouseHostDevice.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
<build type="header-file" value="DeviceFunctions.h"/> |
||||
<build type="header-file" value="HostFunctions.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.joystick"/> |
||||
<require idref="lufa.drivers.board.buttons"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Mouse HID Dual USB Mode Demo (Class Driver APIs)" id="lufa.demos.dualrole.class.mouse.example.avr8"> |
||||
<require idref="lufa.demos.dualrole.class.mouse"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.dualrole.class.mouse" caption="Mouse HID Dual USB Mode Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Mouse host and device dual role demo, implementing a basic mouse device and host. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Dual Role"/> |
||||
<keyword value="HID Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="MouseHostDevice.txt"/> |
||||
|
||||
<build type="c-source" value="MouseHostDevice.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="c-source" value="DeviceFunctions.c"/> |
||||
<build type="c-source" value="HostFunctions.c"/> |
||||
<build type="header-file" value="MouseHostDevice.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
<build type="header-file" value="DeviceFunctions.h"/> |
||||
<build type="header-file" value="HostFunctions.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.joystick"/> |
||||
<require idref="lufa.drivers.board.buttons"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,49 +1,49 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Android Accessory Host Demo (Class Driver APIs)" id="lufa.demos.host.class.android.example.avr8"> |
||||
<require idref="lufa.demos.host.class.android"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.class.android" caption="Android Accessory Host Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Android Accessory Host demo, implementing a basic USB device whose LEDs can be controlled via an Android device. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="Android Accessory Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="AndroidAccessoryHost.txt"/> |
||||
<build type="distribute" subtype="directory" value="AndroidHostApp"/> |
||||
|
||||
<build type="c-source" value="AndroidAccessoryHost.c"/> |
||||
<build type="header-file" value="AndroidAccessoryHost.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Android Accessory Host Demo (Class Driver APIs)" id="lufa.demos.host.class.android.example.avr8"> |
||||
<require idref="lufa.demos.host.class.android"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.class.android" caption="Android Accessory Host Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Android Accessory Host demo, implementing a basic USB device whose LEDs can be controlled via an Android device. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="Android Accessory Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="AndroidAccessoryHost.txt"/> |
||||
<build type="distribute" subtype="directory" value="AndroidHostApp"/> |
||||
|
||||
<build type="c-source" value="AndroidAccessoryHost.c"/> |
||||
<build type="header-file" value="AndroidAccessoryHost.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,48 +1,48 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Audio Input Host Demo (Class Driver APIs)" id="lufa.demos.host.class.audio_input.example.avr8"> |
||||
<require idref="lufa.demos.host.class.audio_input"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.class.audio_input" caption="Audio Input Host Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Audio Input Host demo, implementing a basic USB audio sink that can output incoming audio data to a speaker. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="Audio Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="AudioInputHost.txt"/> |
||||
|
||||
<build type="c-source" value="AudioInputHost.c"/> |
||||
<build type="header-file" value="AudioInputHost.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Audio Input Host Demo (Class Driver APIs)" id="lufa.demos.host.class.audio_input.example.avr8"> |
||||
<require idref="lufa.demos.host.class.audio_input"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.class.audio_input" caption="Audio Input Host Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Audio Input Host demo, implementing a basic USB audio sink that can output incoming audio data to a speaker. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="Audio Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="AudioInputHost.txt"/> |
||||
|
||||
<build type="c-source" value="AudioInputHost.c"/> |
||||
<build type="header-file" value="AudioInputHost.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,52 +1,52 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Audio Output Host Demo (Class Driver APIs)" id="lufa.demos.host.class.audio_output.example.avr8"> |
||||
<require idref="lufa.demos.host.class.audio_output"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.class.audio_output" caption="Audio Output Host Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Audio Output Host demo, implementing a basic USB audio source that can output audio data to an attached device. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="Audio Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="AudioOutputHost.txt"/> |
||||
|
||||
<build type="c-source" value="AudioOutputHost.c"/> |
||||
<build type="header-file" value="AudioOutputHost.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="module-config" subtype="required-header-file" value="AppConfig.h"/> |
||||
<build type="header-file" value="Config/AppConfig.h"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.peripheral.adc"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.buttons"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Audio Output Host Demo (Class Driver APIs)" id="lufa.demos.host.class.audio_output.example.avr8"> |
||||
<require idref="lufa.demos.host.class.audio_output"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.class.audio_output" caption="Audio Output Host Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Audio Output Host demo, implementing a basic USB audio source that can output audio data to an attached device. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="Audio Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="AudioOutputHost.txt"/> |
||||
|
||||
<build type="c-source" value="AudioOutputHost.c"/> |
||||
<build type="header-file" value="AudioOutputHost.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="module-config" subtype="required-header-file" value="AppConfig.h"/> |
||||
<build type="header-file" value="Config/AppConfig.h"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.peripheral.adc"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.buttons"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,48 +1,48 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Joystick HID (with parser) Host Demo (Class Driver APIs)" id="lufa.demos.host.class.joystick_parser.example.avr8"> |
||||
<require idref="lufa.demos.host.class.joystick_parser"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.class.joystick_parser" caption="Joystick HID (with parser) Host Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Joystick HID Host demo with HID parser, implementing a basic USB joystick host that can display movement data on the board LEDs. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="HID Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="JoystickHostWithParser.txt"/> |
||||
|
||||
<build type="c-source" value="JoystickHostWithParser.c"/> |
||||
<build type="header-file" value="JoystickHostWithParser.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Joystick HID (with parser) Host Demo (Class Driver APIs)" id="lufa.demos.host.class.joystick_parser.example.avr8"> |
||||
<require idref="lufa.demos.host.class.joystick_parser"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.class.joystick_parser" caption="Joystick HID (with parser) Host Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Joystick HID Host demo with HID parser, implementing a basic USB joystick host that can display movement data on the board LEDs. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="HID Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="JoystickHostWithParser.txt"/> |
||||
|
||||
<build type="c-source" value="JoystickHostWithParser.c"/> |
||||
<build type="header-file" value="JoystickHostWithParser.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,48 +1,48 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Keyboard HID Host Demo (Class Driver APIs)" id="lufa.demos.host.class.keyboard.example.avr8"> |
||||
<require idref="lufa.demos.host.class.keyboard"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.class.keyboard" caption="Keyboard HID Host Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Keyboard HID Host demo, implementing a basic USB keyboard host that can display key press data on the board LEDs. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="HID Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="KeyboardHost.txt"/> |
||||
|
||||
<build type="c-source" value="KeyboardHost.c"/> |
||||
<build type="header-file" value="KeyboardHost.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Keyboard HID Host Demo (Class Driver APIs)" id="lufa.demos.host.class.keyboard.example.avr8"> |
||||
<require idref="lufa.demos.host.class.keyboard"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.class.keyboard" caption="Keyboard HID Host Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Keyboard HID Host demo, implementing a basic USB keyboard host that can display key press data on the board LEDs. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="HID Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="KeyboardHost.txt"/> |
||||
|
||||
<build type="c-source" value="KeyboardHost.c"/> |
||||
<build type="header-file" value="KeyboardHost.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,48 +1,48 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Keyboard HID (with parser) Host Demo (Class Driver APIs)" id="lufa.demos.host.class.keyboard_parser.example.avr8"> |
||||
<require idref="lufa.demos.host.class.keyboard_parser"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.class.keyboard_parser" caption="Keyboard HID (with parser) Host Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Keyboard HID Host demo with HID parser, implementing a basic USB keyboard host that can display key press data on the board LEDs. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="HID Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="KeyboardHostWithParser.txt"/> |
||||
|
||||
<build type="c-source" value="KeyboardHostWithParser.c"/> |
||||
<build type="header-file" value="KeyboardHostWithParser.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Keyboard HID (with parser) Host Demo (Class Driver APIs)" id="lufa.demos.host.class.keyboard_parser.example.avr8"> |
||||
<require idref="lufa.demos.host.class.keyboard_parser"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.class.keyboard_parser" caption="Keyboard HID (with parser) Host Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Keyboard HID Host demo with HID parser, implementing a basic USB keyboard host that can display key press data on the board LEDs. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="HID Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="KeyboardHostWithParser.txt"/> |
||||
|
||||
<build type="c-source" value="KeyboardHostWithParser.c"/> |
||||
<build type="header-file" value="KeyboardHostWithParser.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,50 +1,50 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="MIDI Host Demo (Class Driver APIs)" id="lufa.demos.host.class.midi.example.avr8"> |
||||
<require idref="lufa.demos.host.class.midi"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.class.midi" caption="MIDI Host Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
MIDI Host demo, capable of sending and receiving MIDI messages to and from an attached device. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="MIDI Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="MIDIHost.txt"/> |
||||
|
||||
<build type="c-source" value="MIDIHost.c"/> |
||||
<build type="header-file" value="MIDIHost.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.buttons"/> |
||||
<require idref="lufa.drivers.board.joystick"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="MIDI Host Demo (Class Driver APIs)" id="lufa.demos.host.class.midi.example.avr8"> |
||||
<require idref="lufa.demos.host.class.midi"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.class.midi" caption="MIDI Host Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
MIDI Host demo, capable of sending and receiving MIDI messages to and from an attached device. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="MIDI Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="MIDIHost.txt"/> |
||||
|
||||
<build type="c-source" value="MIDIHost.c"/> |
||||
<build type="header-file" value="MIDIHost.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.buttons"/> |
||||
<require idref="lufa.drivers.board.joystick"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,48 +1,48 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Mass Storage Host Demo (Class Driver APIs)" id="lufa.demos.host.class.ms.example.avr8"> |
||||
<require idref="lufa.demos.host.class.ms"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.class.ms" caption="Mass Storage Host Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Mass Storage Host demo, capable of reading and writing raw 512 byte segments to the device's serial port. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="Mass Storage Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="MassStorageHost.txt"/> |
||||
|
||||
<build type="c-source" value="MassStorageHost.c"/> |
||||
<build type="header-file" value="MassStorageHost.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Mass Storage Host Demo (Class Driver APIs)" id="lufa.demos.host.class.ms.example.avr8"> |
||||
<require idref="lufa.demos.host.class.ms"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.class.ms" caption="Mass Storage Host Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Mass Storage Host demo, capable of reading and writing raw 512 byte segments to the device's serial port. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="Mass Storage Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="MassStorageHost.txt"/> |
||||
|
||||
<build type="c-source" value="MassStorageHost.c"/> |
||||
<build type="header-file" value="MassStorageHost.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,48 +1,48 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Mouse HID Host Demo (Class Driver APIs)" id="lufa.demos.host.class.mouse.example.avr8"> |
||||
<require idref="lufa.demos.host.class.mouse"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.class.mouse" caption="Mouse HID Host Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Mouse HID Host demo, implementing a basic USB mouse host that can display movement data on the board LEDs. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="HID Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="MouseHost.txt"/> |
||||
|
||||
<build type="c-source" value="MouseHost.c"/> |
||||
<build type="header-file" value="MouseHost.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Mouse HID Host Demo (Class Driver APIs)" id="lufa.demos.host.class.mouse.example.avr8"> |
||||
<require idref="lufa.demos.host.class.mouse"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.class.mouse" caption="Mouse HID Host Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Mouse HID Host demo, implementing a basic USB mouse host that can display movement data on the board LEDs. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="HID Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="MouseHost.txt"/> |
||||
|
||||
<build type="c-source" value="MouseHost.c"/> |
||||
<build type="header-file" value="MouseHost.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,48 +1,48 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Mouse HID (with parser) Host Demo (Class Driver APIs)" id="lufa.demos.host.class.mouse_parser.example.avr8"> |
||||
<require idref="lufa.demos.host.class.mouse_parser"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.class.mouse_parser" caption="Mouse HID (with parser) Host Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Mouse HID Host demo with HID parser, implementing a basic USB mouse host that can display movement data on the board LEDs. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="HID Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="MouseHostWithParser.txt"/> |
||||
|
||||
<build type="c-source" value="MouseHostWithParser.c"/> |
||||
<build type="header-file" value="MouseHostWithParser.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Mouse HID (with parser) Host Demo (Class Driver APIs)" id="lufa.demos.host.class.mouse_parser.example.avr8"> |
||||
<require idref="lufa.demos.host.class.mouse_parser"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.class.mouse_parser" caption="Mouse HID (with parser) Host Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Mouse HID Host demo with HID parser, implementing a basic USB mouse host that can display movement data on the board LEDs. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="HID Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="MouseHostWithParser.txt"/> |
||||
|
||||
<build type="c-source" value="MouseHostWithParser.c"/> |
||||
<build type="header-file" value="MouseHostWithParser.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,48 +1,48 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Printer Host Demo (Class Driver APIs)" id="lufa.demos.host.class.printer.example.avr8"> |
||||
<require idref="lufa.demos.host.class.printer"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.class.printer" caption="Printer Host Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Printer Host demo, implementing a basic USB printer host that can send raw printer control data to an attached device. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="Printer Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="PrinterHost.txt"/> |
||||
|
||||
<build type="c-source" value="PrinterHost.c"/> |
||||
<build type="header-file" value="PrinterHost.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Printer Host Demo (Class Driver APIs)" id="lufa.demos.host.class.printer.example.avr8"> |
||||
<require idref="lufa.demos.host.class.printer"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.class.printer" caption="Printer Host Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Printer Host demo, implementing a basic USB printer host that can send raw printer control data to an attached device. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="Printer Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="PrinterHost.txt"/> |
||||
|
||||
<build type="c-source" value="PrinterHost.c"/> |
||||
<build type="header-file" value="PrinterHost.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,48 +1,48 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="RNDIS Ethernet Host Demo (Class Driver APIs)" id="lufa.demos.host.class.rndis.example.avr8"> |
||||
<require idref="lufa.demos.host.class.rndis"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.class.rndis" caption="RNDIS Ethernet Host Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Microsoft RNDIS Ethernet Host demo, implementing a RNDIS host that can send and receive Ethernet data to and from an attached device. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="RNDIS Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="RNDISEthernetHost.txt"/> |
||||
|
||||
<build type="c-source" value="RNDISEthernetHost.c"/> |
||||
<build type="header-file" value="RNDISEthernetHost.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="RNDIS Ethernet Host Demo (Class Driver APIs)" id="lufa.demos.host.class.rndis.example.avr8"> |
||||
<require idref="lufa.demos.host.class.rndis"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.class.rndis" caption="RNDIS Ethernet Host Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Microsoft RNDIS Ethernet Host demo, implementing a RNDIS host that can send and receive Ethernet data to and from an attached device. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="RNDIS Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="RNDISEthernetHost.txt"/> |
||||
|
||||
<build type="c-source" value="RNDISEthernetHost.c"/> |
||||
<build type="header-file" value="RNDISEthernetHost.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,48 +1,48 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Still Image Host Demo (Class Driver APIs)" id="lufa.demos.host.class.si.example.avr8"> |
||||
<require idref="lufa.demos.host.class.si"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.class.si" caption="Still Image Host Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Still Image Host demo, implementing a Still Image host that can send and receive PIMA data to and from an attached device. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="Still Image Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="StillImageHost.txt"/> |
||||
|
||||
<build type="c-source" value="StillImageHost.c"/> |
||||
<build type="header-file" value="StillImageHost.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Still Image Host Demo (Class Driver APIs)" id="lufa.demos.host.class.si.example.avr8"> |
||||
<require idref="lufa.demos.host.class.si"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.class.si" caption="Still Image Host Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Still Image Host demo, implementing a Still Image host that can send and receive PIMA data to and from an attached device. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="Still Image Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="StillImageHost.txt"/> |
||||
|
||||
<build type="c-source" value="StillImageHost.c"/> |
||||
<build type="header-file" value="StillImageHost.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,48 +1,48 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Virtual Serial CDC Host Demo (Class Driver APIs)" id="lufa.demos.host.class.cdc.example.avr8"> |
||||
<require idref="lufa.demos.host.class.cdc"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.class.cdc" caption="Virtual Serial CDC Host Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Virtual Serial Host demo, implementing a CDC host that can send and receive data to and from an attached device. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="CDC Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="VirtualSerialHost.txt"/> |
||||
|
||||
<build type="c-source" value="VirtualSerialHost.c"/> |
||||
<build type="header-file" value="VirtualSerialHost.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Virtual Serial CDC Host Demo (Class Driver APIs)" id="lufa.demos.host.class.cdc.example.avr8"> |
||||
<require idref="lufa.demos.host.class.cdc"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.class.cdc" caption="Virtual Serial CDC Host Demo (Class Driver APIs)"> |
||||
<info type="description" value="summary"> |
||||
Virtual Serial Host demo, implementing a CDC host that can send and receive data to and from an attached device. This demo uses the user-friendly USB Class Driver APIs to provide a simple, abstracted interface into the USB stack. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="CDC Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="VirtualSerialHost.txt"/> |
||||
|
||||
<build type="c-source" value="VirtualSerialHost.c"/> |
||||
<build type="header-file" value="VirtualSerialHost.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,55 +1,55 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Android Accessory Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.android.example.avr8"> |
||||
<require idref="lufa.demos.host.lowlevel.android"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.lowlevel.android" caption="Android Accessory Host Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Android Accessory Host demo, implementing a basic USB device whose LEDs can be controlled via an Android device. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="Android Accessory Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="AndroidAccessoryHost.txt"/> |
||||
|
||||
<build type="c-source" value="AndroidAccessoryHost.c"/> |
||||
<build type="c-source" value="DeviceDescriptor.c"/> |
||||
<build type="c-source" value="ConfigDescriptor.c"/> |
||||
<build type="header-file" value="AndroidAccessoryHost.h"/> |
||||
<build type="header-file" value="DeviceDescriptor.h"/> |
||||
<build type="header-file" value="ConfigDescriptor.h"/> |
||||
|
||||
<build type="c-source" value="Lib/AndroidAccessoryCommands.c"/> |
||||
<build type="header-file" value="Lib/AndroidAccessoryCommands.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Android Accessory Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.android.example.avr8"> |
||||
<require idref="lufa.demos.host.lowlevel.android"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.lowlevel.android" caption="Android Accessory Host Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Android Accessory Host demo, implementing a basic USB device whose LEDs can be controlled via an Android device. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="Android Accessory Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="AndroidAccessoryHost.txt"/> |
||||
|
||||
<build type="c-source" value="AndroidAccessoryHost.c"/> |
||||
<build type="c-source" value="DeviceDescriptor.c"/> |
||||
<build type="c-source" value="ConfigDescriptor.c"/> |
||||
<build type="header-file" value="AndroidAccessoryHost.h"/> |
||||
<build type="header-file" value="DeviceDescriptor.h"/> |
||||
<build type="header-file" value="ConfigDescriptor.h"/> |
||||
|
||||
<build type="c-source" value="Lib/AndroidAccessoryCommands.c"/> |
||||
<build type="header-file" value="Lib/AndroidAccessoryCommands.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,50 +1,50 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Audio Input Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.audio_input.example.avr8"> |
||||
<require idref="lufa.demos.host.lowlevel.audio_input"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.lowlevel.audio_input" caption="Audio Input Host Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Audio Input Host demo, implementing a basic USB audio sink that can output incoming audio data to a speaker. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="Audio Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="AudioInputHost.txt"/> |
||||
|
||||
<build type="c-source" value="AudioInputHost.c"/> |
||||
<build type="c-source" value="ConfigDescriptor.c"/> |
||||
<build type="header-file" value="AudioInputHost.h"/> |
||||
<build type="header-file" value="ConfigDescriptor.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Audio Input Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.audio_input.example.avr8"> |
||||
<require idref="lufa.demos.host.lowlevel.audio_input"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.lowlevel.audio_input" caption="Audio Input Host Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Audio Input Host demo, implementing a basic USB audio sink that can output incoming audio data to a speaker. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="Audio Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="AudioInputHost.txt"/> |
||||
|
||||
<build type="c-source" value="AudioInputHost.c"/> |
||||
<build type="c-source" value="ConfigDescriptor.c"/> |
||||
<build type="header-file" value="AudioInputHost.h"/> |
||||
<build type="header-file" value="ConfigDescriptor.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,54 +1,54 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Audio Output Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.audio_output.example.avr8"> |
||||
<require idref="lufa.demos.host.lowlevel.audio_output"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.lowlevel.audio_output" caption="Audio Output Host Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Audio Output Host demo, implementing a basic USB audio source that can output audio data to an attached device. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="Audio Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="AudioOutputHost.txt"/> |
||||
|
||||
<build type="c-source" value="AudioOutputHost.c"/> |
||||
<build type="c-source" value="ConfigDescriptor.c"/> |
||||
<build type="header-file" value="AudioOutputHost.h"/> |
||||
<build type="header-file" value="ConfigDescriptor.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="module-config" subtype="required-header-file" value="AppConfig.h"/> |
||||
<build type="header-file" value="Config/AppConfig.h"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.peripheral.adc"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.buttons"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Audio Output Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.audio_output.example.avr8"> |
||||
<require idref="lufa.demos.host.lowlevel.audio_output"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.lowlevel.audio_output" caption="Audio Output Host Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Audio Output Host demo, implementing a basic USB audio source that can output audio data to an attached device. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="Audio Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="AudioOutputHost.txt"/> |
||||
|
||||
<build type="c-source" value="AudioOutputHost.c"/> |
||||
<build type="c-source" value="ConfigDescriptor.c"/> |
||||
<build type="header-file" value="AudioOutputHost.h"/> |
||||
<build type="header-file" value="ConfigDescriptor.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="module-config" subtype="required-header-file" value="AppConfig.h"/> |
||||
<build type="header-file" value="Config/AppConfig.h"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.peripheral.adc"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.buttons"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,50 +1,50 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Generic HID Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.generic_hid.example.avr8"> |
||||
<require idref="lufa.demos.host.lowlevel.generic_hid"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.lowlevel.generic_hid" caption="Generic HID Host Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Generic HID Host demo, implementing a basic USB HID device that can send and receive data to and from an attached device. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="HID Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="GenericHIDHost.txt"/> |
||||
|
||||
<build type="c-source" value="GenericHIDHost.c"/> |
||||
<build type="c-source" value="ConfigDescriptor.c"/> |
||||
<build type="header-file" value="GenericHIDHost.h"/> |
||||
<build type="header-file" value="ConfigDescriptor.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Generic HID Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.generic_hid.example.avr8"> |
||||
<require idref="lufa.demos.host.lowlevel.generic_hid"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.lowlevel.generic_hid" caption="Generic HID Host Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Generic HID Host demo, implementing a basic USB HID device that can send and receive data to and from an attached device. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="HID Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="GenericHIDHost.txt"/> |
||||
|
||||
<build type="c-source" value="GenericHIDHost.c"/> |
||||
<build type="c-source" value="ConfigDescriptor.c"/> |
||||
<build type="header-file" value="GenericHIDHost.h"/> |
||||
<build type="header-file" value="ConfigDescriptor.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,52 +1,52 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Joystick HID (with parser) Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.joystick_parser.example.avr8"> |
||||
<require idref="lufa.demos.host.lowlevel.joystick_parser"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.lowlevel.joystick_parser" caption="Joystick HID (with parser) Host Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Joystick HID Host demo with HID parser, implementing a basic USB joystick host that can display movement data on the board LEDs. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="HID Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="JoystickHostWithParser.txt"/> |
||||
|
||||
<build type="c-source" value="JoystickHostWithParser.c"/> |
||||
<build type="c-source" value="ConfigDescriptor.c"/> |
||||
<build type="c-source" value="HIDReport.c"/> |
||||
<build type="header-file" value="JoystickHostWithParser.h"/> |
||||
<build type="header-file" value="ConfigDescriptor.h"/> |
||||
<build type="header-file" value="HIDReport.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Joystick HID (with parser) Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.joystick_parser.example.avr8"> |
||||
<require idref="lufa.demos.host.lowlevel.joystick_parser"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.lowlevel.joystick_parser" caption="Joystick HID (with parser) Host Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Joystick HID Host demo with HID parser, implementing a basic USB joystick host that can display movement data on the board LEDs. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="HID Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="JoystickHostWithParser.txt"/> |
||||
|
||||
<build type="c-source" value="JoystickHostWithParser.c"/> |
||||
<build type="c-source" value="ConfigDescriptor.c"/> |
||||
<build type="c-source" value="HIDReport.c"/> |
||||
<build type="header-file" value="JoystickHostWithParser.h"/> |
||||
<build type="header-file" value="ConfigDescriptor.h"/> |
||||
<build type="header-file" value="HIDReport.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,50 +1,50 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Keyboard HID Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.keyboard.example.avr8"> |
||||
<require idref="lufa.demos.host.lowlevel.keyboard"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.lowlevel.keyboard" caption="Keyboard HID Host Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Keyboard HID Host demo, implementing a basic USB keyboard host that can display key press data on the board LEDs. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="HID Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="KeyboardHost.txt"/> |
||||
|
||||
<build type="c-source" value="KeyboardHost.c"/> |
||||
<build type="c-source" value="ConfigDescriptor.c"/> |
||||
<build type="header-file" value="KeyboardHost.h"/> |
||||
<build type="header-file" value="ConfigDescriptor.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Keyboard HID Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.keyboard.example.avr8"> |
||||
<require idref="lufa.demos.host.lowlevel.keyboard"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.lowlevel.keyboard" caption="Keyboard HID Host Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Keyboard HID Host demo, implementing a basic USB keyboard host that can display key press data on the board LEDs. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="HID Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="KeyboardHost.txt"/> |
||||
|
||||
<build type="c-source" value="KeyboardHost.c"/> |
||||
<build type="c-source" value="ConfigDescriptor.c"/> |
||||
<build type="header-file" value="KeyboardHost.h"/> |
||||
<build type="header-file" value="ConfigDescriptor.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,52 +1,52 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Keyboard HID (with parser) Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.keyboard_parser.example.avr8"> |
||||
<require idref="lufa.demos.host.lowlevel.keyboard_parser"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.lowlevel.keyboard_parser" caption="Keyboard HID (with parser) Host Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Keyboard HID Host demo with HID parser, implementing a basic USB keyboard host that can display key press data on the board LEDs. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="HID Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="KeyboardHostWithParser.txt"/> |
||||
|
||||
<build type="c-source" value="KeyboardHostWithParser.c"/> |
||||
<build type="c-source" value="ConfigDescriptor.c"/> |
||||
<build type="c-source" value="HIDReport.c"/> |
||||
<build type="header-file" value="KeyboardHostWithParser.h"/> |
||||
<build type="header-file" value="ConfigDescriptor.h"/> |
||||
<build type="header-file" value="HIDReport.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Keyboard HID (with parser) Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.keyboard_parser.example.avr8"> |
||||
<require idref="lufa.demos.host.lowlevel.keyboard_parser"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.lowlevel.keyboard_parser" caption="Keyboard HID (with parser) Host Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Keyboard HID Host demo with HID parser, implementing a basic USB keyboard host that can display key press data on the board LEDs. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="HID Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="KeyboardHostWithParser.txt"/> |
||||
|
||||
<build type="c-source" value="KeyboardHostWithParser.c"/> |
||||
<build type="c-source" value="ConfigDescriptor.c"/> |
||||
<build type="c-source" value="HIDReport.c"/> |
||||
<build type="header-file" value="KeyboardHostWithParser.h"/> |
||||
<build type="header-file" value="ConfigDescriptor.h"/> |
||||
<build type="header-file" value="HIDReport.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,52 +1,52 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="MIDI Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.midi.example.avr8"> |
||||
<require idref="lufa.demos.host.lowlevel.midi"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.lowlevel.midi" caption="MIDI Host Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
MIDI Host demo, capable of sending and receiving MIDI messages to and from an attached device. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="MIDI Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="MIDIHost.txt"/> |
||||
|
||||
<build type="c-source" value="MIDIHost.c"/> |
||||
<build type="c-source" value="ConfigDescriptor.c"/> |
||||
<build type="header-file" value="MIDIHost.h"/> |
||||
<build type="header-file" value="ConfigDescriptor.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.buttons"/> |
||||
<require idref="lufa.drivers.board.joystick"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="MIDI Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.midi.example.avr8"> |
||||
<require idref="lufa.demos.host.lowlevel.midi"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.lowlevel.midi" caption="MIDI Host Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
MIDI Host demo, capable of sending and receiving MIDI messages to and from an attached device. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="MIDI Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="MIDIHost.txt"/> |
||||
|
||||
<build type="c-source" value="MIDIHost.c"/> |
||||
<build type="c-source" value="ConfigDescriptor.c"/> |
||||
<build type="header-file" value="MIDIHost.h"/> |
||||
<build type="header-file" value="ConfigDescriptor.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
<require idref="lufa.drivers.board.buttons"/> |
||||
<require idref="lufa.drivers.board.joystick"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,53 +1,53 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Mass Storage Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.ms.example.avr8"> |
||||
<require idref="lufa.demos.host.lowlevel.ms"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.lowlevel.ms" caption="Mass Storage Host Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Mass Storage Host demo, capable of reading and writing raw 512 byte segments to the device's serial port. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="Mass Storage Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="MassStorageHost.txt"/> |
||||
|
||||
<build type="c-source" value="MassStorageHost.c"/> |
||||
<build type="c-source" value="ConfigDescriptor.c"/> |
||||
<build type="header-file" value="MassStorageHost.h"/> |
||||
<build type="header-file" value="ConfigDescriptor.h"/> |
||||
|
||||
<build type="c-source" value="Lib/MassStoreCommands.c"/> |
||||
<build type="header-file" value="Lib/MassStoreCommands.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Mass Storage Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.ms.example.avr8"> |
||||
<require idref="lufa.demos.host.lowlevel.ms"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.lowlevel.ms" caption="Mass Storage Host Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Mass Storage Host demo, capable of reading and writing raw 512 byte segments to the device's serial port. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="Mass Storage Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="MassStorageHost.txt"/> |
||||
|
||||
<build type="c-source" value="MassStorageHost.c"/> |
||||
<build type="c-source" value="ConfigDescriptor.c"/> |
||||
<build type="header-file" value="MassStorageHost.h"/> |
||||
<build type="header-file" value="ConfigDescriptor.h"/> |
||||
|
||||
<build type="c-source" value="Lib/MassStoreCommands.c"/> |
||||
<build type="header-file" value="Lib/MassStoreCommands.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,50 +1,50 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Mouse HID Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.mouse.example.avr8"> |
||||
<require idref="lufa.demos.host.lowlevel.mouse"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.lowlevel.mouse" caption="Mouse HID Host Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Keyboard HID Host demo, implementing a basic USB mouse host that can display movement data on the board LEDs. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="HID Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="MouseHost.txt"/> |
||||
|
||||
<build type="c-source" value="MouseHost.c"/> |
||||
<build type="c-source" value="ConfigDescriptor.c"/> |
||||
<build type="header-file" value="MouseHost.h"/> |
||||
<build type="header-file" value="ConfigDescriptor.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Mouse HID Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.mouse.example.avr8"> |
||||
<require idref="lufa.demos.host.lowlevel.mouse"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.lowlevel.mouse" caption="Mouse HID Host Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Keyboard HID Host demo, implementing a basic USB mouse host that can display movement data on the board LEDs. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="HID Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="MouseHost.txt"/> |
||||
|
||||
<build type="c-source" value="MouseHost.c"/> |
||||
<build type="c-source" value="ConfigDescriptor.c"/> |
||||
<build type="header-file" value="MouseHost.h"/> |
||||
<build type="header-file" value="ConfigDescriptor.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,52 +1,52 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Mouse HID (with parser) Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.mouse_parser.example.avr8"> |
||||
<require idref="lufa.demos.host.lowlevel.mouse_parser"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.lowlevel.mouse_parser" caption="Mouse HID (with parser) Host Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Mouse HID Host demo with HID parser, implementing a basic USB mouse host that can display movement data on the board LEDs. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="HID Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="MouseHostWithParser.txt"/> |
||||
|
||||
<build type="c-source" value="MouseHostWithParser.c"/> |
||||
<build type="c-source" value="ConfigDescriptor.c"/> |
||||
<build type="c-source" value="HIDReport.c"/> |
||||
<build type="header-file" value="MouseHostWithParser.h"/> |
||||
<build type="header-file" value="ConfigDescriptor.h"/> |
||||
<build type="header-file" value="HIDReport.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Mouse HID (with parser) Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.mouse_parser.example.avr8"> |
||||
<require idref="lufa.demos.host.lowlevel.mouse_parser"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.lowlevel.mouse_parser" caption="Mouse HID (with parser) Host Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Mouse HID Host demo with HID parser, implementing a basic USB mouse host that can display movement data on the board LEDs. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="HID Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="MouseHostWithParser.txt"/> |
||||
|
||||
<build type="c-source" value="MouseHostWithParser.c"/> |
||||
<build type="c-source" value="ConfigDescriptor.c"/> |
||||
<build type="c-source" value="HIDReport.c"/> |
||||
<build type="header-file" value="MouseHostWithParser.h"/> |
||||
<build type="header-file" value="ConfigDescriptor.h"/> |
||||
<build type="header-file" value="HIDReport.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,53 +1,53 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Printer Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.printer.example.avr8"> |
||||
<require idref="lufa.demos.host.lowlevel.printer"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.lowlevel.printer" caption="Printer Host Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Printer Host demo, implementing a basic USB printer host that can send raw printer control data to an attached device. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="Printer Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="PrinterHost.txt"/> |
||||
|
||||
<build type="c-source" value="PrinterHost.c"/> |
||||
<build type="c-source" value="ConfigDescriptor.c"/> |
||||
<build type="header-file" value="PrinterHost.h"/> |
||||
<build type="header-file" value="ConfigDescriptor.h"/> |
||||
|
||||
<build type="c-source" value="Lib/PrinterCommands.c"/> |
||||
<build type="header-file" value="Lib/PrinterCommands.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Printer Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.printer.example.avr8"> |
||||
<require idref="lufa.demos.host.lowlevel.printer"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.lowlevel.printer" caption="Printer Host Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Printer Host demo, implementing a basic USB printer host that can send raw printer control data to an attached device. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="Printer Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="PrinterHost.txt"/> |
||||
|
||||
<build type="c-source" value="PrinterHost.c"/> |
||||
<build type="c-source" value="ConfigDescriptor.c"/> |
||||
<build type="header-file" value="PrinterHost.h"/> |
||||
<build type="header-file" value="ConfigDescriptor.h"/> |
||||
|
||||
<build type="c-source" value="Lib/PrinterCommands.c"/> |
||||
<build type="header-file" value="Lib/PrinterCommands.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,53 +1,53 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="RNDIS Ethernet Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.rndis.example.avr8"> |
||||
<require idref="lufa.demos.host.lowlevel.rndis"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.lowlevel.rndis" caption="RNDIS Ethernet Host Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Microsoft RNDIS Ethernet Host demo, implementing a RNDIS host that can send and receive Ethernet data to and from an attached device. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="RNDIS Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="RNDISHost.txt"/> |
||||
|
||||
<build type="c-source" value="RNDISEthernetHost.c"/> |
||||
<build type="c-source" value="ConfigDescriptor.c"/> |
||||
<build type="header-file" value="RNDISEthernetHost.h"/> |
||||
<build type="header-file" value="ConfigDescriptor.h"/> |
||||
|
||||
<build type="c-source" value="Lib/RNDISCommands.c"/> |
||||
<build type="header-file" value="Lib/RNDISCommands.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="RNDIS Ethernet Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.rndis.example.avr8"> |
||||
<require idref="lufa.demos.host.lowlevel.rndis"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.lowlevel.rndis" caption="RNDIS Ethernet Host Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Microsoft RNDIS Ethernet Host demo, implementing a RNDIS host that can send and receive Ethernet data to and from an attached device. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="RNDIS Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="RNDISHost.txt"/> |
||||
|
||||
<build type="c-source" value="RNDISEthernetHost.c"/> |
||||
<build type="c-source" value="ConfigDescriptor.c"/> |
||||
<build type="header-file" value="RNDISEthernetHost.h"/> |
||||
<build type="header-file" value="ConfigDescriptor.h"/> |
||||
|
||||
<build type="c-source" value="Lib/RNDISCommands.c"/> |
||||
<build type="header-file" value="Lib/RNDISCommands.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,54 +1,54 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Still Image Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.si.example.avr8"> |
||||
<require idref="lufa.demos.host.lowlevel.si"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.lowlevel.si" caption="Still Image Host Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Still Image Host demo, implementing a Still Image host that can send and receive PIMA data to and from an attached device. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="Still Image Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="StillImageHost.txt"/> |
||||
|
||||
<build type="c-source" value="StillImageHost.c"/> |
||||
<build type="c-source" value="ConfigDescriptor.c"/> |
||||
<build type="header-file" value="StillImageHost.h"/> |
||||
<build type="header-file" value="ConfigDescriptor.h"/> |
||||
|
||||
<build type="c-source" value="Lib/StillImageCommands.c"/> |
||||
<build type="header-file" value="Lib/StillImageCommands.h"/> |
||||
<build type="header-file" value="Lib/PIMACodes.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Still Image Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.si.example.avr8"> |
||||
<require idref="lufa.demos.host.lowlevel.si"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.lowlevel.si" caption="Still Image Host Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Still Image Host demo, implementing a Still Image host that can send and receive PIMA data to and from an attached device. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Low Level APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="Still Image Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="StillImageHost.txt"/> |
||||
|
||||
<build type="c-source" value="StillImageHost.c"/> |
||||
<build type="c-source" value="ConfigDescriptor.c"/> |
||||
<build type="header-file" value="StillImageHost.h"/> |
||||
<build type="header-file" value="ConfigDescriptor.h"/> |
||||
|
||||
<build type="c-source" value="Lib/StillImageCommands.c"/> |
||||
<build type="header-file" value="Lib/StillImageCommands.h"/> |
||||
<build type="header-file" value="Lib/PIMACodes.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,50 +1,50 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Virtual Serial CDC Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.cdc.example.avr8"> |
||||
<require idref="lufa.demos.host.lowlevel.cdc"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.lowlevel.cdc" caption="Virtual Serial CDC Host Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Virtual Serial Host demo, implementing a CDC host that can send and receive data to and from an attached device. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="CDC Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="VirtualSerialHost.txt"/> |
||||
|
||||
<build type="c-source" value="VirtualSerialHost.c"/> |
||||
<build type="c-source" value="ConfigDescriptor.c"/> |
||||
<build type="header-file" value="VirtualSerialHost.h"/> |
||||
<build type="header-file" value="ConfigDescriptor.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="Virtual Serial CDC Host Demo (Low Level APIs)" id="lufa.demos.host.lowlevel.cdc.example.avr8"> |
||||
<require idref="lufa.demos.host.lowlevel.cdc"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="none"/> |
||||
|
||||
<build type="define" name="F_CPU" value="16000000UL"/> |
||||
<build type="define" name="F_USB" value="16000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.demos.host.lowlevel.cdc" caption="Virtual Serial CDC Host Demo (Low Level APIs)"> |
||||
<info type="description" value="summary"> |
||||
Virtual Serial Host demo, implementing a CDC host that can send and receive data to and from an attached device. This demo uses the Low Level LUFA APIs to manually implement a USB Class for demonstration purposes without using the simpler in-built LUFA Class Driver APIs. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="Class Driver APIs"/> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="CDC Class"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="distribute" subtype="user-file" value="doxyfile"/> |
||||
<build type="distribute" subtype="user-file" value="VirtualSerialHost.txt"/> |
||||
|
||||
<build type="c-source" value="VirtualSerialHost.c"/> |
||||
<build type="c-source" value="ConfigDescriptor.c"/> |
||||
<build type="header-file" value="VirtualSerialHost.h"/> |
||||
<build type="header-file" value="ConfigDescriptor.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value="Config"/> |
||||
<build type="header-file" value="Config/LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.peripheral.usart"/> |
||||
<require idref="lufa.drivers.misc.ansi"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
<require idref="lufa.drivers.board.leds"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,55 +1,55 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="USB Device Template" id="lufa.templates.device.project.avr8"> |
||||
<require idref="lufa.templates.device"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8_template"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="usbkey"/> |
||||
|
||||
<build type="define" name="F_CPU" value="8000000UL"/> |
||||
<build type="define" name="F_USB" value="8000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="USB Device Template" id="lufa.templates.device.project.xmega"> |
||||
<require idref="lufa.templates.device"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8_template"/> |
||||
|
||||
<device-support value="atxmega256a3bu"/> |
||||
<config name="lufa.drivers.board.name" value="a3bu_xplained"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.templates.device" caption="USB Device Template"> |
||||
<info type="description" value="summary"> |
||||
Template for a LUFA USB device mode application. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="Template Projects"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="c-source" value="DeviceApplication.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="DeviceApplication.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value=".."/> |
||||
<build type="header-file" value="../LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="USB Device Template" id="lufa.templates.device.project.avr8"> |
||||
<require idref="lufa.templates.device"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8_template"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="usbkey"/> |
||||
|
||||
<build type="define" name="F_CPU" value="8000000UL"/> |
||||
<build type="define" name="F_USB" value="8000000UL"/> |
||||
</project> |
||||
|
||||
<project caption="USB Device Template" id="lufa.templates.device.project.xmega"> |
||||
<require idref="lufa.templates.device"/> |
||||
<require idref="lufa.boards.dummy.xmega"/> |
||||
<generator value="as5_8_template"/> |
||||
|
||||
<device-support value="atxmega256a3bu"/> |
||||
<config name="lufa.drivers.board.name" value="a3bu_xplained"/> |
||||
|
||||
<build type="define" name="F_CPU" value="32000000UL"/> |
||||
<build type="define" name="F_USB" value="48000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.templates.device" caption="USB Device Template"> |
||||
<info type="description" value="summary"> |
||||
Template for a LUFA USB device mode application. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="USB Device"/> |
||||
<keyword value="Template Projects"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="c-source" value="DeviceApplication.c"/> |
||||
<build type="c-source" value="Descriptors.c"/> |
||||
<build type="header-file" value="DeviceApplication.h"/> |
||||
<build type="header-file" value="Descriptors.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value=".."/> |
||||
<build type="header-file" value="../LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,41 +1,41 @@ |
||||
<asf xmlversion="1.0"> |
||||
<project caption="USB Host Template" id="lufa.templates.host.project"> |
||||
<require idref="lufa.templates.host"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8_template"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="usbkey"/> |
||||
|
||||
<build type="define" name="F_CPU" value="8000000UL"/> |
||||
<build type="define" name="F_USB" value="8000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.templates.host" caption="USB Host Template"> |
||||
<info type="description" value="summary"> |
||||
Template for a LUFA USB host mode application. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="Template Projects"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="c-source" value="HostApplication.c"/> |
||||
<build type="header-file" value="HostApplication.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value=".."/> |
||||
<build type="header-file" value="../LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
</module> |
||||
</asf> |
||||
<asf xmlversion="1.0"> |
||||
<project caption="USB Host Template" id="lufa.templates.host.project"> |
||||
<require idref="lufa.templates.host"/> |
||||
<require idref="lufa.boards.dummy.avr8"/> |
||||
<generator value="as5_8_template"/> |
||||
|
||||
<device-support value="at90usb1287"/> |
||||
<config name="lufa.drivers.board.name" value="usbkey"/> |
||||
|
||||
<build type="define" name="F_CPU" value="8000000UL"/> |
||||
<build type="define" name="F_USB" value="8000000UL"/> |
||||
</project> |
||||
|
||||
<module type="application" id="lufa.templates.host" caption="USB Host Template"> |
||||
<info type="description" value="summary"> |
||||
Template for a LUFA USB host mode application. |
||||
</info> |
||||
|
||||
<info type="gui-flag" value="move-to-root"/> |
||||
|
||||
<info type="keyword" value="Technology"> |
||||
<keyword value="USB Host"/> |
||||
<keyword value="Template Projects"/> |
||||
</info> |
||||
|
||||
<device-support-alias value="lufa_avr8"/> |
||||
<device-support-alias value="lufa_xmega"/> |
||||
<device-support-alias value="lufa_uc3"/> |
||||
|
||||
<build type="c-source" value="HostApplication.c"/> |
||||
<build type="header-file" value="HostApplication.h"/> |
||||
|
||||
<build type="module-config" subtype="path" value=".."/> |
||||
<build type="header-file" value="../LUFAConfig.h"/> |
||||
|
||||
<require idref="lufa.common"/> |
||||
<require idref="lufa.platform"/> |
||||
<require idref="lufa.drivers.usb"/> |
||||
<require idref="lufa.drivers.board"/> |
||||
</module> |
||||
</asf> |
||||
|
||||
@ -1,281 +1,281 @@ |
||||
/** \file |
||||
* |
||||
* This file contains special DoxyGen information for the generation of the main page and other special |
||||
* documentation pages. It is not a project source file. |
||||
*/ |
||||
|
||||
/** \page Page_BuildSystem The LUFA Build System |
||||
* |
||||
* \section Sec_BuildSystem_Overview Overview of the LUFA Build System |
||||
* The LUFA build system was originally an attempt at making a set of |
||||
* re-usable, modular build make files which could be referenced in a LUFA |
||||
* powered project, to minimize the amount of code required in an |
||||
* application makefile. |
||||
* |
||||
* As it turned out to be fairly generic in nature, it was split out into its |
||||
* own separate project, called DMBS (<i>Dean's Makefile Build System</i>) |
||||
* which is released into the public domain. LUFA-specific portions of the |
||||
* LUFA build system extend DMBS, and provide a universal build system for all |
||||
* LUFA projects. |
||||
* |
||||
* The latest DMBS project information and documentation can be found at: |
||||
* https://github.com/abcminiuser/dmbs |
||||
* |
||||
* DMBS is written in GNU Make, and each module is independent of one-another. |
||||
* |
||||
* LUFA now uses DMBS for its build system, with some LUFA specific extension |
||||
* modules. |
||||
* |
||||
* If you have problems building using LUFA, see \subpage Page_BuildTroubleshooting for resolution steps. |
||||
* |
||||
* \li \subpage Page_BuildModule_LUFA_SOURCES - The LUFA SOURCES extension module for DMBS |
||||
* \li \subpage Page_BuildModule_LUFA_GCC - The LUFA GCC extension module for DMBS |
||||
*/ |
||||
|
||||
/** \page Page_BuildModule_LUFA_SOURCES LUFA SOURCES extension module for DMBS |
||||
* |
||||
* The LUFA SOURCES extension more for DMBS provides LUFA specific variables |
||||
* listing the various LUFA source files required to be build by a project for |
||||
* a given LUFA module. This module gives a way to reference LUFA source files |
||||
* symbolically, so that changes to the library structure do not break the |
||||
* library makefile. |
||||
* |
||||
* To use this module in your application makefile, add the following code: |
||||
* \code |
||||
* include $(LUFA_PATH)/Build/LUFA/lufa-sources.mk |
||||
* \endcode |
||||
* |
||||
* \section SSec_BuildModule_LUFA_SOURCES_Requirements Requirements |
||||
* None. |
||||
* |
||||
* \section SSec_BuildModule_LUFA_SOURCES_Targets Targets |
||||
* |
||||
* <table> |
||||
* <tr> |
||||
* <td><i>None</i></td> |
||||
* </tr> |
||||
* </table> |
||||
* |
||||
* \section SSec_BuildModule_LUFA_SOURCES_MandatoryParams Mandatory Parameters |
||||
* |
||||
* <table> |
||||
* <tr> |
||||
* <td><tt>LUFA_PATH</tt></td> |
||||
* <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td> |
||||
* </tr> |
||||
* <tr> |
||||
* <td><tt>ARCH</tt></td> |
||||
* <td>Architecture of the target processor (see \ref Page_DeviceSupport).</td> |
||||
* </tr> |
||||
* </table> |
||||
* |
||||
* \section SSec_BuildModule_LUFA_SOURCES_OptionalParams Optional Parameters |
||||
* |
||||
* <table> |
||||
* <tr> |
||||
* <td><i>None</i></td> |
||||
* </tr> |
||||
* </table> |
||||
* |
||||
* \section SSec_BuildModule_LUFA_SOURCES_ProvidedVariables Module Provided Variables |
||||
* |
||||
* <table> |
||||
* <tr> |
||||
* <td><tt>LUFA_SRC_USB</tt></td> |
||||
* <td>List of LUFA USB driver source files.</td> |
||||
* </tr> |
||||
* <tr> |
||||
* <td><tt>LUFA_SRC_USBCLASS</tt></td> |
||||
* <td>List of LUFA USB Class driver source files.</td> |
||||
* </tr> |
||||
* <tr> |
||||
* <td><tt>LUFA_SRC_TEMPERATURE</tt></td> |
||||
* <td>List of LUFA temperature sensor driver source files.</td> |
||||
* </tr> |
||||
* <tr> |
||||
* <td><tt>LUFA_SRC_SERIAL</tt></td> |
||||
* <td>List of LUFA Serial U(S)ART driver source files.</td> |
||||
* </tr> |
||||
* <tr> |
||||
* <td><tt>LUFA_SRC_TWI</tt></td> |
||||
* <td>List of LUFA TWI driver source files.</td> |
||||
* </tr> |
||||
* <tr> |
||||
* <td><tt>LUFA_SRC_PLATFORM</tt></td> |
||||
* <td>List of LUFA architecture specific platform management source files.</td> |
||||
* </tr> |
||||
* </table> |
||||
* |
||||
* \section SSec_BuildModule_LUFA_SOURCES_ProvidedMacros Module Provided Macros |
||||
* |
||||
* <table> |
||||
* <tr> |
||||
* <td><i>None</i></td> |
||||
* </tr> |
||||
* </table> |
||||
*/ |
||||
|
||||
/** \page Page_BuildModule_LUFA_GCC LUFA GCC extension module for DMBS |
||||
* |
||||
* The LUFA GCC extension module for the standard DMBS GCC module extends the |
||||
* latter to support the compilation of LUFA powered projects. It should be |
||||
* imported into your LUFA powered project makefiles to ensure that the correct |
||||
* build settings are used for the project's configuration. |
||||
* |
||||
* To use this module in your application makefile, add the following code: |
||||
* \code |
||||
* include $(LUFA_PATH)/Build/LUFA/lufa-gcc.mk |
||||
* \endcode |
||||
* |
||||
* \section SSec_BuildModule_LUFA_GCC_Requirements Requirements |
||||
* This module should be included in your makefile *after* the DMBS GCC module. |
||||
* |
||||
* \section SSec_BuildModule_LUFA_GCC_Targets Targets |
||||
* |
||||
* <table> |
||||
* <tr> |
||||
* <td><i>None</i></td> |
||||
* </tr> |
||||
* </table> |
||||
* |
||||
* \section SSec_BuildModule_LUFA_GCC_MandatoryParams Mandatory Parameters |
||||
* |
||||
* <table> |
||||
* <tr> |
||||
* <td><tt>LUFA_PATH</tt></td> |
||||
* <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td> |
||||
* </tr> |
||||
* </table> |
||||
* |
||||
* \section SSec_BuildModule_LUFA_GCC_OptionalParams Optional Parameters |
||||
* |
||||
* <table> |
||||
* <tr> |
||||
* <td><tt>BOARD</tt></td> |
||||
* <td>LUFA board hardware drivers to use (see \ref Page_DeviceSupport).</td> |
||||
* </tr> |
||||
* </table> |
||||
* |
||||
* \section SSec_BuildModule_LUFA_GCC_ProvidedVariables Module Provided Variables |
||||
* |
||||
* <table> |
||||
* <tr> |
||||
* <td><i>None</i></td> |
||||
* </tr> |
||||
* </table> |
||||
* |
||||
* \section SSec_BuildModule_LUFA_GCC_ProvidedMacros Module Provided Macros |
||||
* |
||||
* <table> |
||||
* <tr> |
||||
* <td><i>None</i></td> |
||||
* </tr> |
||||
* </table> |
||||
*/ |
||||
|
||||
/** \page Page_BuildTroubleshooting Troubleshooting Information |
||||
* |
||||
* LUFA uses a lot of advanced features of the AVR-GCC compiler, linker, and |
||||
* surrounding binaries. This can sometimes lead to problems compiling |
||||
* applications if one of these features is buggy in the version of the tools |
||||
* used in a build environment. Missing utilities and incorrectly set makefile |
||||
* configuration options can also result in different errors being produced |
||||
* when compilation or other operations are attempted. The table below lists a |
||||
* set of commonly encountered errors and their resolutions. |
||||
* |
||||
* <table> |
||||
* <tr> |
||||
* <th>Problem</th> |
||||
* <th>Resolution</th> |
||||
* </tr> |
||||
* <tr> |
||||
* <td>Error "<b><tt>relocation truncated to fit: R_AVR_13_PCREL against symbol <i>{X}</i></tt></b>" shown when compiling.</td> |
||||
* <td>Try compiling with the setting <tt>LINKER_RELAXATIONS=N</tt> in your LUFA Build System 2.0 makefile, or remove the line <tt>-Wl,--relax</tt> |
||||
* from other makefiles. Alternatively, make sure you have the latest version of the Atmel Toolchain installed for your system.</td> |
||||
* </tr> |
||||
* <tr> |
||||
* <td>Error "<b><tt>error: ld terminated with signal 11 [Segmentation fault]</tt></b>" shown when compiling.</td> |
||||
* <td>Try compiling with the setting <tt>DEBUG_LEVEL=2</tt> in your LUFA Build System 2.0 makefile, or make sure you are using <tt>binutils</tt> version 2.22 or later.</td> |
||||
* </tr> |
||||
* <tr> |
||||
* <td>Error "<b><tt>EMERGENCY ABORT: INFINITE RECURSION DETECTED</tt></b>" shown when compiling.</td> |
||||
* <td>Make sure you are using an up to date version of GNU Make when compiling. This error is a safety system added to the mid-level makefiles, to prevent an issue with |
||||
* GNU make or other variants of Make causing an infinitely recursive build.</td> |
||||
* </tr> |
||||
* <tr> |
||||
* <td>Error "<b><tt>Unsupported architecture "<i>{X}</i>"</tt></b>" shown when compiling.</td> |
||||
* <td>Ensure your makefile's <tt>ARCH</tt> setting is set to one of the architecture names (case-sensitive) supported by the version of LUFA you are compiling against.</td> |
||||
* </tr> |
||||
* <tr> |
||||
* <td>Error "<b><tt>Makefile <i>{X}</i> value not set</tt></b>" shown when compiling.</td> |
||||
* <td>The specified Makefile value was not configured in your project's makefile or on the command line, and the nominated setting is required by one or more LUFA |
||||
* build system modules. Define the value in your project makefile and try again.</td> |
||||
* </tr> |
||||
* <tr> |
||||
* <td>Error "<b><tt>Makefile <i>{X}</i> option cannot be blank</tt></b>" shown when compiling.</td> |
||||
* <td>The specified Makefile value was configured in your project's makefile or on the command line, but was set to an empty value. For the nominated configuration |
||||
* option, an empty value is not allowed. Define the nominated setting to a correct non-blank value and try again.</td> |
||||
* </tr> |
||||
* <tr> |
||||
* <td>Error "<b><tt>Makefile <i>{X}</i> option must be Y or N</tt></b>" shown when compiling.</td> |
||||
* <td>The specified Makefile value was configured in your project's makefile or on the command line, but was set to a value other than a Y (for "Yes") or "N" (for "No"). |
||||
* This configuration option is required to be one of the aforementioned boolean values, and other values are invalid. Set this option to either Y or N and try again.</td> |
||||
* </tr> |
||||
* <tr> |
||||
* <td>Error "<b><tt>Unknown input source file formats: <i>{X}</i></tt></b>" shown when compiling.</td> |
||||
* <td>The nominated source files, specified in your project's makefile in the <tt>SRC</tt> configuration option, has an extension that the LUFA build system does not |
||||
* recognise. The file extensions are case sensitive, and must be one of the supported formats (<tt>*.c</tt>, <tt>*.cpp</tt> or <tt>*.S</tt>).</td> |
||||
* </tr> |
||||
* <tr> |
||||
* <td>Error "<b><tt>Cannot build with OBJDIR parameter set - one or more object file name is not unique</tt></b>" shown when compiling.</td> |
||||
* <td>When a project is built with a non-empty <tt>OBJDIR</tt> object directory name set, all input source files must have unique names, excluding extension and path. |
||||
* This means that input files that are named identically and differ only by their path or extension are invalid when this mode is used.</td> |
||||
* </tr> |
||||
* <tr> |
||||
* <td>Error "<b><tt>Source file does not exist: <i>{X}</i></tt></b>" shown when compiling.</td> |
||||
* <td>The nominated input source file, specified in the user project's <tt>SRC</tt> parameter, could not be found. Ensure the source file exists and the absolute or |
||||
* relative path given in the user project makefile is correct and try again.</td> |
||||
* </tr> |
||||
* <tr> |
||||
* <td>Error "<b><tt>Doxygen configuration file <i>{X}</i> does not exist</tt></b>" shown when upgrading a Doxygen configuration file.</td> |
||||
* <td>The nominated Doxygen configuration file, specified in the user project's <tt>DOXYGEN_CONF</tt> parameter, could not be found. Ensure the configuration file exists |
||||
* and the absolute or relative path given in the user project makefile is correct and try again, or run the appropriate makefile target to generate a new configuration |
||||
* file.</td> |
||||
* </tr> |
||||
* <tr> |
||||
* <td>Error "<b><tt>avr-gcc: error: unrecognized option '<i>{X}</i>'</tt></b>" shown when compiling.</td> |
||||
* <td>An unrecognised option was supplied to the compiler, usually in the <tt>C_FLAGS</tt>, <tt>CPP_FLAGS</tt>, <tt>ASM_FLAGS</tt> or <tt>CC_FLAGS</tt> configuration |
||||
* options. The nominated compiler switch may be invalid, or unsupported by the version of AVR-GCC on the host system. Remove the unrecognised flag if invalid, or |
||||
* upgrade to the latest AVR-GCC. If the option is a valid linker option, use the prefix "-Wl," to ensure it is passed to the linker correctly.</td> |
||||
* </tr> |
||||
* <tr> |
||||
* <td>Error "<b><tt>makefile:{X}: {Y}.mk: No such file or directory</tt></b>" shown when make is invoked.</td> |
||||
* <td>The path to the nominated makefile module was incorrect. This usually indicates that the makefile <tt>LUFA_PATH</tt> option is not set to a valid relative or |
||||
* absolute path to the LUFA library core.</td> |
||||
* </tr> |
||||
* <tr> |
||||
* <td>Error "<b><tt>fatal error: LUFAConfig.h: No such file or directory</tt></b>" shown when compiling.</td> |
||||
* <td>The <tt>USE_LUFA_CONFIG_HEADER</tt> compile time option was set in the user project makefile, but the user supplied <tt>LUFAConfig.h</tt> header could not be |
||||
* found. Ensure that the directory that contains this configuration file is correctly passed to the compiler via the -I switch in the makefile <tt>CC_FLAGS</tt> |
||||
* parameter.</td> |
||||
* </tr> |
||||
* <tr> |
||||
* <td>Error "<b><tt>ld.exe: section .apitable_trampolines loaded at <i>{X}</i> overlaps section .text</tt></b>" shown when compiling a bootloader.</td> |
||||
* <td>The bootloader is compiling too large for the given <tt>FLASH_SIZE_KB</tt> and <tt>BOOT_SECTION_SIZE_KB</tt> parameters set in the bootloader makefile. This |
||||
* usually indicates that these values are incorrect for the specified device the bootloader is targeting. If these values are correct, a newer version of the |
||||
* compiler may need to be used to ensure that the bootloader is built within the section size constraints of the target device.</td> |
||||
* </tr> |
||||
* <tr> |
||||
* <td>Error "<b><tt>unknown MCU '<i>{X}</i>' specified</tt></b>" shown when compiling.</td> |
||||
* <td>The specified microcontroller device model name set in the user application's makefile as the <tt>MCU</tt> parameter is incorrect, or unsupported by the |
||||
* version of the compiler being used. Make sure the model name is correct, or upgrade to the latest Atmel Toolchain to obtain newer device support.</td> |
||||
* </tr> |
||||
* <tr> |
||||
* <td>Error "<b><tt>undefined reference to `<i>{X}</i>'</tt></b>" shown when compiling.</td> |
||||
* <td>This is usually caused by a missing source file in the user application's <tt>SRC</tt> configuration parameter. If the indicated symbol is one from the LUFA |
||||
* library, you may be missing a LUFA source makefile module (see \ref Page_BuildModule_LUFA_SOURCES).</td> |
||||
* </tr> |
||||
* </table> |
||||
* |
||||
* For troubleshooting other errors you encounter, please see \ref Sec_ProjectHelp. |
||||
*/ |
||||
/** \file |
||||
* |
||||
* This file contains special DoxyGen information for the generation of the main page and other special |
||||
* documentation pages. It is not a project source file. |
||||
*/ |
||||
|
||||
/** \page Page_BuildSystem The LUFA Build System |
||||
* |
||||
* \section Sec_BuildSystem_Overview Overview of the LUFA Build System |
||||
* The LUFA build system was originally an attempt at making a set of |
||||
* re-usable, modular build make files which could be referenced in a LUFA |
||||
* powered project, to minimize the amount of code required in an |
||||
* application makefile. |
||||
* |
||||
* As it turned out to be fairly generic in nature, it was split out into its |
||||
* own separate project, called DMBS (<i>Dean's Makefile Build System</i>) |
||||
* which is released into the public domain. LUFA-specific portions of the |
||||
* LUFA build system extend DMBS, and provide a universal build system for all |
||||
* LUFA projects. |
||||
* |
||||
* The latest DMBS project information and documentation can be found at: |
||||
* https://github.com/abcminiuser/dmbs |
||||
* |
||||
* DMBS is written in GNU Make, and each module is independent of one-another. |
||||
* |
||||
* LUFA now uses DMBS for its build system, with some LUFA specific extension |
||||
* modules. |
||||
* |
||||
* If you have problems building using LUFA, see \subpage Page_BuildTroubleshooting for resolution steps. |
||||
* |
||||
* \li \subpage Page_BuildModule_LUFA_SOURCES - The LUFA SOURCES extension module for DMBS |
||||
* \li \subpage Page_BuildModule_LUFA_GCC - The LUFA GCC extension module for DMBS |
||||
*/ |
||||
|
||||
/** \page Page_BuildModule_LUFA_SOURCES LUFA SOURCES extension module for DMBS |
||||
* |
||||
* The LUFA SOURCES extension more for DMBS provides LUFA specific variables |
||||
* listing the various LUFA source files required to be build by a project for |
||||
* a given LUFA module. This module gives a way to reference LUFA source files |
||||
* symbolically, so that changes to the library structure do not break the |
||||
* library makefile. |
||||
* |
||||
* To use this module in your application makefile, add the following code: |
||||
* \code |
||||
* include $(LUFA_PATH)/Build/LUFA/lufa-sources.mk |
||||
* \endcode |
||||
* |
||||
* \section SSec_BuildModule_LUFA_SOURCES_Requirements Requirements |
||||
* None. |
||||
* |
||||
* \section SSec_BuildModule_LUFA_SOURCES_Targets Targets |
||||
* |
||||
* <table> |
||||
* <tr> |
||||
* <td><i>None</i></td> |
||||
* </tr> |
||||
* </table> |
||||
* |
||||
* \section SSec_BuildModule_LUFA_SOURCES_MandatoryParams Mandatory Parameters |
||||
* |
||||
* <table> |
||||
* <tr> |
||||
* <td><tt>LUFA_PATH</tt></td> |
||||
* <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td> |
||||
* </tr> |
||||
* <tr> |
||||
* <td><tt>ARCH</tt></td> |
||||
* <td>Architecture of the target processor (see \ref Page_DeviceSupport).</td> |
||||
* </tr> |
||||
* </table> |
||||
* |
||||
* \section SSec_BuildModule_LUFA_SOURCES_OptionalParams Optional Parameters |
||||
* |
||||
* <table> |
||||
* <tr> |
||||
* <td><i>None</i></td> |
||||
* </tr> |
||||
* </table> |
||||
* |
||||
* \section SSec_BuildModule_LUFA_SOURCES_ProvidedVariables Module Provided Variables |
||||
* |
||||
* <table> |
||||
* <tr> |
||||
* <td><tt>LUFA_SRC_USB</tt></td> |
||||
* <td>List of LUFA USB driver source files.</td> |
||||
* </tr> |
||||
* <tr> |
||||
* <td><tt>LUFA_SRC_USBCLASS</tt></td> |
||||
* <td>List of LUFA USB Class driver source files.</td> |
||||
* </tr> |
||||
* <tr> |
||||
* <td><tt>LUFA_SRC_TEMPERATURE</tt></td> |
||||
* <td>List of LUFA temperature sensor driver source files.</td> |
||||
* </tr> |
||||
* <tr> |
||||
* <td><tt>LUFA_SRC_SERIAL</tt></td> |
||||
* <td>List of LUFA Serial U(S)ART driver source files.</td> |
||||
* </tr> |
||||
* <tr> |
||||
* <td><tt>LUFA_SRC_TWI</tt></td> |
||||
* <td>List of LUFA TWI driver source files.</td> |
||||
* </tr> |
||||
* <tr> |
||||
* <td><tt>LUFA_SRC_PLATFORM</tt></td> |
||||
* <td>List of LUFA architecture specific platform management source files.</td> |
||||
* </tr> |
||||
* </table> |
||||
* |
||||
* \section SSec_BuildModule_LUFA_SOURCES_ProvidedMacros Module Provided Macros |
||||
* |
||||
* <table> |
||||
* <tr> |
||||
* <td><i>None</i></td> |
||||
* </tr> |
||||
* </table> |
||||
*/ |
||||
|
||||
/** \page Page_BuildModule_LUFA_GCC LUFA GCC extension module for DMBS |
||||
* |
||||
* The LUFA GCC extension module for the standard DMBS GCC module extends the |
||||
* latter to support the compilation of LUFA powered projects. It should be |
||||
* imported into your LUFA powered project makefiles to ensure that the correct |
||||
* build settings are used for the project's configuration. |
||||
* |
||||
* To use this module in your application makefile, add the following code: |
||||
* \code |
||||
* include $(LUFA_PATH)/Build/LUFA/lufa-gcc.mk |
||||
* \endcode |
||||
* |
||||
* \section SSec_BuildModule_LUFA_GCC_Requirements Requirements |
||||
* This module should be included in your makefile *after* the DMBS GCC module. |
||||
* |
||||
* \section SSec_BuildModule_LUFA_GCC_Targets Targets |
||||
* |
||||
* <table> |
||||
* <tr> |
||||
* <td><i>None</i></td> |
||||
* </tr> |
||||
* </table> |
||||
* |
||||
* \section SSec_BuildModule_LUFA_GCC_MandatoryParams Mandatory Parameters |
||||
* |
||||
* <table> |
||||
* <tr> |
||||
* <td><tt>LUFA_PATH</tt></td> |
||||
* <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td> |
||||
* </tr> |
||||
* </table> |
||||
* |
||||
* \section SSec_BuildModule_LUFA_GCC_OptionalParams Optional Parameters |
||||
* |
||||
* <table> |
||||
* <tr> |
||||
* <td><tt>BOARD</tt></td> |
||||
* <td>LUFA board hardware drivers to use (see \ref Page_DeviceSupport).</td> |
||||
* </tr> |
||||
* </table> |
||||
* |
||||
* \section SSec_BuildModule_LUFA_GCC_ProvidedVariables Module Provided Variables |
||||
* |
||||
* <table> |
||||
* <tr> |
||||
* <td><i>None</i></td> |
||||
* </tr> |
||||
* </table> |
||||
* |
||||
* \section SSec_BuildModule_LUFA_GCC_ProvidedMacros Module Provided Macros |
||||
* |
||||
* <table> |
||||
* <tr> |
||||
* <td><i>None</i></td> |
||||
* </tr> |
||||
* </table> |
||||
*/ |
||||
|
||||
/** \page Page_BuildTroubleshooting Troubleshooting Information |
||||
* |
||||
* LUFA uses a lot of advanced features of the AVR-GCC compiler, linker, and |
||||
* surrounding binaries. This can sometimes lead to problems compiling |
||||
* applications if one of these features is buggy in the version of the tools |
||||
* used in a build environment. Missing utilities and incorrectly set makefile |
||||
* configuration options can also result in different errors being produced |
||||
* when compilation or other operations are attempted. The table below lists a |
||||
* set of commonly encountered errors and their resolutions. |
||||
* |
||||
* <table> |
||||
* <tr> |
||||
* <th>Problem</th> |
||||
* <th>Resolution</th> |
||||
* </tr> |
||||
* <tr> |
||||
* <td>Error "<b><tt>relocation truncated to fit: R_AVR_13_PCREL against symbol <i>{X}</i></tt></b>" shown when compiling.</td> |
||||
* <td>Try compiling with the setting <tt>LINKER_RELAXATIONS=N</tt> in your LUFA Build System 2.0 makefile, or remove the line <tt>-Wl,--relax</tt> |
||||
* from other makefiles. Alternatively, make sure you have the latest version of the Atmel Toolchain installed for your system.</td> |
||||
* </tr> |
||||
* <tr> |
||||
* <td>Error "<b><tt>error: ld terminated with signal 11 [Segmentation fault]</tt></b>" shown when compiling.</td> |
||||
* <td>Try compiling with the setting <tt>DEBUG_LEVEL=2</tt> in your LUFA Build System 2.0 makefile, or make sure you are using <tt>binutils</tt> version 2.22 or later.</td> |
||||
* </tr> |
||||
* <tr> |
||||
* <td>Error "<b><tt>EMERGENCY ABORT: INFINITE RECURSION DETECTED</tt></b>" shown when compiling.</td> |
||||
* <td>Make sure you are using an up to date version of GNU Make when compiling. This error is a safety system added to the mid-level makefiles, to prevent an issue with |
||||
* GNU make or other variants of Make causing an infinitely recursive build.</td> |
||||
* </tr> |
||||
* <tr> |
||||
* <td>Error "<b><tt>Unsupported architecture "<i>{X}</i>"</tt></b>" shown when compiling.</td> |
||||
* <td>Ensure your makefile's <tt>ARCH</tt> setting is set to one of the architecture names (case-sensitive) supported by the version of LUFA you are compiling against.</td> |
||||
* </tr> |
||||
* <tr> |
||||
* <td>Error "<b><tt>Makefile <i>{X}</i> value not set</tt></b>" shown when compiling.</td> |
||||
* <td>The specified Makefile value was not configured in your project's makefile or on the command line, and the nominated setting is required by one or more LUFA |
||||
* build system modules. Define the value in your project makefile and try again.</td> |
||||
* </tr> |
||||
* <tr> |
||||
* <td>Error "<b><tt>Makefile <i>{X}</i> option cannot be blank</tt></b>" shown when compiling.</td> |
||||
* <td>The specified Makefile value was configured in your project's makefile or on the command line, but was set to an empty value. For the nominated configuration |
||||
* option, an empty value is not allowed. Define the nominated setting to a correct non-blank value and try again.</td> |
||||
* </tr> |
||||
* <tr> |
||||
* <td>Error "<b><tt>Makefile <i>{X}</i> option must be Y or N</tt></b>" shown when compiling.</td> |
||||
* <td>The specified Makefile value was configured in your project's makefile or on the command line, but was set to a value other than a Y (for "Yes") or "N" (for "No"). |
||||
* This configuration option is required to be one of the aforementioned boolean values, and other values are invalid. Set this option to either Y or N and try again.</td> |
||||
* </tr> |
||||
* <tr> |
||||
* <td>Error "<b><tt>Unknown input source file formats: <i>{X}</i></tt></b>" shown when compiling.</td> |
||||
* <td>The nominated source files, specified in your project's makefile in the <tt>SRC</tt> configuration option, has an extension that the LUFA build system does not |
||||
* recognise. The file extensions are case sensitive, and must be one of the supported formats (<tt>*.c</tt>, <tt>*.cpp</tt> or <tt>*.S</tt>).</td> |
||||
* </tr> |
||||
* <tr> |
||||
* <td>Error "<b><tt>Cannot build with OBJDIR parameter set - one or more object file name is not unique</tt></b>" shown when compiling.</td> |
||||
* <td>When a project is built with a non-empty <tt>OBJDIR</tt> object directory name set, all input source files must have unique names, excluding extension and path. |
||||
* This means that input files that are named identically and differ only by their path or extension are invalid when this mode is used.</td> |
||||
* </tr> |
||||
* <tr> |
||||
* <td>Error "<b><tt>Source file does not exist: <i>{X}</i></tt></b>" shown when compiling.</td> |
||||
* <td>The nominated input source file, specified in the user project's <tt>SRC</tt> parameter, could not be found. Ensure the source file exists and the absolute or |
||||
* relative path given in the user project makefile is correct and try again.</td> |
||||
* </tr> |
||||
* <tr> |
||||
* <td>Error "<b><tt>Doxygen configuration file <i>{X}</i> does not exist</tt></b>" shown when upgrading a Doxygen configuration file.</td> |
||||
* <td>The nominated Doxygen configuration file, specified in the user project's <tt>DOXYGEN_CONF</tt> parameter, could not be found. Ensure the configuration file exists |
||||
* and the absolute or relative path given in the user project makefile is correct and try again, or run the appropriate makefile target to generate a new configuration |
||||
* file.</td> |
||||
* </tr> |
||||
* <tr> |
||||
* <td>Error "<b><tt>avr-gcc: error: unrecognized option '<i>{X}</i>'</tt></b>" shown when compiling.</td> |
||||
* <td>An unrecognised option was supplied to the compiler, usually in the <tt>C_FLAGS</tt>, <tt>CPP_FLAGS</tt>, <tt>ASM_FLAGS</tt> or <tt>CC_FLAGS</tt> configuration |
||||
* options. The nominated compiler switch may be invalid, or unsupported by the version of AVR-GCC on the host system. Remove the unrecognised flag if invalid, or |
||||
* upgrade to the latest AVR-GCC. If the option is a valid linker option, use the prefix "-Wl," to ensure it is passed to the linker correctly.</td> |
||||
* </tr> |
||||
* <tr> |
||||
* <td>Error "<b><tt>makefile:{X}: {Y}.mk: No such file or directory</tt></b>" shown when make is invoked.</td> |
||||
* <td>The path to the nominated makefile module was incorrect. This usually indicates that the makefile <tt>LUFA_PATH</tt> option is not set to a valid relative or |
||||
* absolute path to the LUFA library core.</td> |
||||
* </tr> |
||||
* <tr> |
||||
* <td>Error "<b><tt>fatal error: LUFAConfig.h: No such file or directory</tt></b>" shown when compiling.</td> |
||||
* <td>The <tt>USE_LUFA_CONFIG_HEADER</tt> compile time option was set in the user project makefile, but the user supplied <tt>LUFAConfig.h</tt> header could not be |
||||
* found. Ensure that the directory that contains this configuration file is correctly passed to the compiler via the -I switch in the makefile <tt>CC_FLAGS</tt> |
||||
* parameter.</td> |
||||
* </tr> |
||||
* <tr> |
||||
* <td>Error "<b><tt>ld.exe: section .apitable_trampolines loaded at <i>{X}</i> overlaps section .text</tt></b>" shown when compiling a bootloader.</td> |
||||
* <td>The bootloader is compiling too large for the given <tt>FLASH_SIZE_KB</tt> and <tt>BOOT_SECTION_SIZE_KB</tt> parameters set in the bootloader makefile. This |
||||
* usually indicates that these values are incorrect for the specified device the bootloader is targeting. If these values are correct, a newer version of the |
||||
* compiler may need to be used to ensure that the bootloader is built within the section size constraints of the target device.</td> |
||||
* </tr> |
||||
* <tr> |
||||
* <td>Error "<b><tt>unknown MCU '<i>{X}</i>' specified</tt></b>" shown when compiling.</td> |
||||
* <td>The specified microcontroller device model name set in the user application's makefile as the <tt>MCU</tt> parameter is incorrect, or unsupported by the |
||||
* version of the compiler being used. Make sure the model name is correct, or upgrade to the latest Atmel Toolchain to obtain newer device support.</td> |
||||
* </tr> |
||||
* <tr> |
||||
* <td>Error "<b><tt>undefined reference to `<i>{X}</i>'</tt></b>" shown when compiling.</td> |
||||
* <td>This is usually caused by a missing source file in the user application's <tt>SRC</tt> configuration parameter. If the indicated symbol is one from the LUFA |
||||
* library, you may be missing a LUFA source makefile module (see \ref Page_BuildModule_LUFA_SOURCES).</td> |
||||
* </tr> |
||||
* </table> |
||||
* |
||||
* For troubleshooting other errors you encounter, please see \ref Sec_ProjectHelp. |
||||
*/ |
||||
|
||||
Loading…
Reference in new issue