hailey
/
qmk_firmware
mirror of https://github.com/hailey/qmk_firmware.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

The beginning of a simple led matrix driver for is31fl3731

Browse Source
rgb7seg
skullY 6 years ago committed by skullydazed
parent aeafcc9fd3
commit fd698c43d7
8 changed files with 1380 additions and 11 deletions
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Show Stats Download Patch File Download Diff File
  1. 20
      common_features.mk
  2. 217
      docs/feature_led_matrix.md
  3. 240
      drivers/issi/is31fl3731-simple.c
  4. 209
      drivers/issi/is31fl3731-simple.h
  5. 404
      quantum/led_matrix.c
  6. 142
      quantum/led_matrix.h
  7. 147
      quantum/led_matrix_drivers.c
  8. 12
      quantum/rgb_matrix.h

20
common_features.mk
Unescape View File

@ -114,8 +114,26 @@ ifeq ($(strip $(RGBLIGHT_ENABLE)), yes)
endif
endif
RGB_MATRIX_ENABLE ?= no
VALID_MATRIX_TYPES := yes IS31FL3731 IS31FL3733 custom
LED_MATRIX_ENABLE ?= no
ifneq ($(strip $(LED_MATRIX_ENABLE)), no)
ifeq ($(filter $(LED_MATRIX_ENABLE),$(VALID_MATRIX_TYPES)),)
$(error LED_MATRIX_ENABLE="$(LED_MATRIX_ENABLE)" is not a valid matrix type)
endif
OPT_DEFS += -DLED_MATRIX_ENABLE
SRC += $(QUANTUM_DIR)/led_matrix.c
SRC += $(QUANTUM_DIR)/led_matrix_drivers.c
endif
ifeq ($(strip $(LED_MATRIX_ENABLE)), IS31FL3731)
OPT_DEFS += -DIS31FL3731
COMMON_VPATH += $(DRIVER_PATH)/issi
SRC += is31fl3731-simple.c
SRC += i2c_master.c
endif
RGB_MATRIX_ENABLE ?= no
ifneq ($(strip $(RGB_MATRIX_ENABLE)), no)
ifeq ($(filter $(RGB_MATRIX_ENABLE),$(VALID_MATRIX_TYPES)),)
$(error RGB_MATRIX_ENABLE="$(RGB_MATRIX_ENABLE)" is not a valid matrix type)

217
docs/feature_led_matrix.md
Unescape View File

@ -0,0 +1,217 @@
# RGB Matrix Lighting
## Driver configuration
### IS31FL3731
There is basic support for addressable RGB matrix lighting with the I2C IS31FL3731 RGB controller. To enable it, add this to your `rules.mk`:
LED_MATRIX_ENABLE = IS31FL3731
Configure the hardware via your `config.h`:
// This is a 7-bit address, that gets left-shifted and bit 0
// set to 0 for write, 1 for read (as per I2C protocol)
// The address will vary depending on your wiring:
// 0b1110100 AD <-> GND
// 0b1110111 AD <-> VCC
// 0b1110101 AD <-> SCL
// 0b1110110 AD <-> SDA
#define LED_DRIVER_ADDR_1 0b1110100
#define LED_DRIVER_ADDR_2 0b1110110
#define LED_DRIVER_COUNT 2
#define LED_DRIVER_1_LED_TOTAL 25
#define LED_DRIVER_2_LED_TOTAL 24
#define LED_DRIVER_LED_TOTAL LED_DRIVER_1_LED_TOTAL + LED_DRIVER_2_LED_TOTAL
Currently only 2 drivers are supported, but it would be trivial to support all 4 combinations.
Define these arrays listing all the LEDs in your `<keyboard>.c`:
const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
/* Refer to IS31 manual for these locations
* driver
* | R location
* | | G location
* | | | B location
* | | | | */
{0, C1_3, C2_3, C3_3},
....
}
Where `Cx_y` is the location of the LED in the matrix defined by [the datasheet](http://www.issi.com/WW/pdf/31FL3731.pdf) and the header file `drivers/issi/is31fl3731.h`. The `driver` is the index of the driver you defined in your `config.h` (`0` or `1` right now).
### IS31FL3733
There is basic support for addressable RGB matrix lighting with the I2C IS31FL3733 RGB controller. To enable it, add this to your `rules.mk`:
RGB_MATRIX_ENABLE = IS31FL3733
Configure the hardware via your `config.h`:
// This is a 7-bit address, that gets left-shifted and bit 0
// set to 0 for write, 1 for read (as per I2C protocol)
// The address will vary depending on your wiring:
// 00 <-> GND
// 01 <-> SCL
// 10 <-> SDA
// 11 <-> VCC
// ADDR1 represents A1:A0 of the 7-bit address.
// ADDR2 represents A3:A2 of the 7-bit address.
// The result is: 0b101(ADDR2)(ADDR1)
#define DRIVER_ADDR_1 0b1010000
#define DRIVER_ADDR_2 0b1010000 // this is here for compliancy reasons.
#define DRIVER_COUNT 1
#define DRIVER_1_LED_TOTAL 64
#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL
Currently only a single drivers is supported, but it would be trivial to support all 4 combinations. For now define `DRIVER_ADDR_2` as `DRIVER_ADDR_1`
Define these arrays listing all the LEDs in your `<keyboard>.c`:
const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
/* Refer to IS31 manual for these locations
* driver
* | R location
* | | G location
* | | | B location
* | | | | */
{0, B_1, A_1, C_1},
....
}
Where `X_Y` is the location of the LED in the matrix defined by [the datasheet](http://www.issi.com/WW/pdf/31FL3733.pdf) and the header file `drivers/issi/is31fl3733.h`. The `driver` is the index of the driver you defined in your `config.h` (Only `0` right now).
From this point forward the configuration is the same for all the drivers.
const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
/* {row | col << 4}
* | {x=0..224, y=0..64}
* | | modifier
* | | | */
{{0|(0<<4)}, {20.36*0, 21.33*0}, 1},
{{0|(1<<4)}, {20.36*1, 21.33*0}, 1},
....
}
The format for the matrix position used in this array is `{row | (col << 4)}`. The `x` is between (inclusive) 0-224, and `y` is between (inclusive) 0-64. The easiest way to calculate these positions is:
x = 224 / ( NUMBER_OF_ROWS - 1 ) * ROW_POSITION
y = 64 / (NUMBER_OF_COLS - 1 ) * COL_POSITION
Where all variables are decimels/floats.
`modifier` is a boolean, whether or not a certain key is considered a modifier (used in some effects).
## Keycodes
All RGB keycodes are currently shared with the RGBLIGHT system:
* `RGB_TOG` - toggle
* `RGB_MOD` - cycle through modes
* `RGB_HUI` - increase hue
* `RGB_HUD` - decrease hue
* `RGB_SAI` - increase saturation
* `RGB_SAD` - decrease saturation
* `RGB_VAI` - increase value
* `RGB_VAD` - decrease value
* `RGB_SPI` - increase speed effect (no EEPROM support)
* `RGB_SPD` - decrease speed effect (no EEPROM support)
* `RGB_MODE_*` keycodes will generally work, but are not currently mapped to the correct effects for the RGB Matrix system
## RGB Matrix Effects
These are the effects that are currently available:
enum rgb_matrix_effects {
RGB_MATRIX_SOLID_COLOR = 1,
RGB_MATRIX_ALPHAS_MODS,
RGB_MATRIX_DUAL_BEACON,
RGB_MATRIX_GRADIENT_UP_DOWN,
RGB_MATRIX_RAINDROPS,
RGB_MATRIX_CYCLE_ALL,
RGB_MATRIX_CYCLE_LEFT_RIGHT,
RGB_MATRIX_CYCLE_UP_DOWN,
RGB_MATRIX_RAINBOW_BEACON,
RGB_MATRIX_RAINBOW_PINWHEELS,
RGB_MATRIX_RAINBOW_MOVING_CHEVRON,
RGB_MATRIX_JELLYBEAN_RAINDROPS,
RGB_MATRIX_DIGITAL_RAIN,
#ifdef RGB_MATRIX_KEYPRESSES
RGB_MATRIX_SOLID_REACTIVE,
RGB_MATRIX_SPLASH,
RGB_MATRIX_MULTISPLASH,
RGB_MATRIX_SOLID_SPLASH,
RGB_MATRIX_SOLID_MULTISPLASH,
#endif
RGB_MATRIX_EFFECT_MAX
};
You can disable a single effect by defining `DISABLE_[EFFECT_NAME]` in your `config.h`:
|Define |Description |
|---------------------------------------------------|--------------------------------------------|
|`#define DISABLE_RGB_MATRIX_ALPHAS_MODS` |Disables `RGB_MATRIX_ALPHAS_MODS` |
|`#define DISABLE_RGB_MATRIX_DUAL_BEACON` |Disables `RGB_MATRIX_DUAL_BEACON` |
|`#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN` |Disables `RGB_MATRIX_GRADIENT_UP_DOWN` |
|`#define DISABLE_RGB_MATRIX_RAINDROPS` |Disables `RGB_MATRIX_RAINDROPS` |
|`#define DISABLE_RGB_MATRIX_CYCLE_ALL` |Disables `RGB_MATRIX_CYCLE_ALL` |
|`#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT` |Disables `RGB_MATRIX_CYCLE_LEFT_RIGHT` |
|`#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN` |Disables `RGB_MATRIX_CYCLE_UP_DOWN` |
|`#define DISABLE_RGB_MATRIX_RAINBOW_BEACON` |Disables `RGB_MATRIX_RAINBOW_BEACON` |
|`#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS` |Disables `RGB_MATRIX_RAINBOW_PINWHEELS` |
|`#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON`|Disables `RGB_MATRIX_RAINBOW_MOVING_CHEVRON`|
|`#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS` |Disables `RGB_MATRIX_JELLYBEAN_RAINDROPS` |
|`#define DISABLE_RGB_MATRIX_DIGITAL_RAIN` |Disables `RGB_MATRIX_DIGITAL_RAIN` |
|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE` |Disables `RGB_MATRIX_SOLID_REACTIVE` |
|`#define DISABLE_RGB_MATRIX_SPLASH` |Disables `RGB_MATRIX_SPLASH` |
|`#define DISABLE_RGB_MATRIX_MULTISPLASH` |Disables `RGB_MATRIX_MULTISPLASH` |
|`#define DISABLE_RGB_MATRIX_SOLID_SPLASH` |Disables `RGB_MATRIX_SOLID_SPLASH` |
|`#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH` |Disables `RGB_MATRIX_SOLID_MULTISPLASH` |
## Custom layer effects
Custom layer effects can be done by defining this in your `<keyboard>.c`:
void rgb_matrix_indicators_kb(void) {
rgb_matrix_set_color(index, red, green, blue);
}
A similar function works in the keymap as `rgb_matrix_indicators_user`.
## Additional `config.h` Options
#define RGB_MATRIX_KEYPRESSES // reacts to keypresses (will slow down matrix scan by a lot)
#define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (not recommened)
#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
#define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended
#define RGB_MATRIX_SKIP_FRAMES 1 // number of frames to skip when displaying animations (0 is full effect) if not defined defaults to 1
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
## EEPROM storage
The EEPROM for it is currently shared with the RGBLIGHT system (it's generally assumed only one RGB would be used at a time), but could be configured to use its own 32bit address with:
#define EECONFIG_RGB_MATRIX (uint32_t *)16
Where `16` is an unused index from `eeconfig.h`.
## Suspended state
To use the suspend feature, add this to your `<keyboard>.c`:
void suspend_power_down_kb(void)
{
rgb_matrix_set_suspend_state(true);
}
void suspend_wakeup_init_kb(void)
{
rgb_matrix_set_suspend_state(false);
}

240
drivers/issi/is31fl3731-simple.c
Unescape View File

@ -0,0 +1,240 @@
/* Copyright 2017 Jason Williams
* Copyright 2018 Jack Humbert
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifdef __AVR__
#include <avr/interrupt.h>
#include <avr/io.h>
#include <util/delay.h>
#else
#include "wait.h"
#endif
#include <stdint.h>
#include <stdbool.h>
#include <string.h>
#include "is31fl3731-simple.h"
#include "i2c_master.h"
#include "progmem.h"
// This is a 7-bit address, that gets left-shifted and bit 0
// set to 0 for write, 1 for read (as per I2C protocol)
// The address will vary depending on your wiring:
// 0b1110100 AD <-> GND
// 0b1110111 AD <-> VCC
// 0b1110101 AD <-> SCL
// 0b1110110 AD <-> SDA
#define ISSI_ADDR_DEFAULT 0x74
#define ISSI_REG_CONFIG 0x00
#define ISSI_REG_CONFIG_PICTUREMODE 0x00
#define ISSI_REG_CONFIG_AUTOPLAYMODE 0x08
#define ISSI_REG_CONFIG_AUDIOPLAYMODE 0x18
#define ISSI_CONF_PICTUREMODE 0x00
#define ISSI_CONF_AUTOFRAMEMODE 0x04
#define ISSI_CONF_AUDIOMODE 0x08
#define ISSI_REG_PICTUREFRAME 0x01
#define ISSI_REG_SHUTDOWN 0x0A
#define ISSI_REG_AUDIOSYNC 0x06
#define ISSI_COMMANDREGISTER 0xFD
#define ISSI_BANK_FUNCTIONREG 0x0B // helpfully called 'page nine'
#ifndef ISSI_TIMEOUT
#define ISSI_TIMEOUT 100
#endif
#ifndef ISSI_PERSISTENCE
#define ISSI_PERSISTENCE 0
#endif
// Transfer buffer for TWITransmitData()
uint8_t g_twi_transfer_buffer[20];
// These buffers match the IS31FL3731 PWM registers 0x24-0xB3.
// Storing them like this is optimal for I2C transfers to the registers.
// We could optimize this and take out the unused registers from these
// buffers and the transfers in IS31FL3731_write_pwm_buffer() but it's
// probably not worth the extra complexity.
uint8_t g_pwm_buffer[DRIVER_COUNT][144];
bool g_pwm_buffer_update_required = false;
uint8_t g_led_control_registers[DRIVER_COUNT][18] = { { 0 }, { 0 } };
bool g_led_control_registers_update_required = false;
// This is the bit pattern in the LED control registers
// (for matrix A, add one to register for matrix B)
//
// reg - b7 b6 b5 b4 b3 b2 b1 b0
// 0x00 - R08,R07,R06,R05,R04,R03,R02,R01
// 0x02 - G08,G07,G06,G05,G04,G03,G02,R00
// 0x04 - B08,B07,B06,B05,B04,B03,G01,G00
// 0x06 - - , - , - , - , - ,B02,B01,B00
// 0x08 - - , - , - , - , - , - , - , -
// 0x0A - B17,B16,B15, - , - , - , - , -
// 0x0C - G17,G16,B14,B13,B12,B11,B10,B09
// 0x0E - R17,G15,G14,G13,G12,G11,G10,G09
// 0x10 - R16,R15,R14,R13,R12,R11,R10,R09
void IS31FL3731_write_register(uint8_t addr, uint8_t reg, uint8_t data) {
g_twi_transfer_buffer[0] = reg;
g_twi_transfer_buffer[1] = data;
#if ISSI_PERSISTENCE > 0
for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT) == 0) {
break;
}
}
#else
i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, ISSI_TIMEOUT);
#endif
}
void IS31FL3731_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) {
// assumes bank is already selected
// transmit PWM registers in 9 transfers of 16 bytes
// g_twi_transfer_buffer[] is 20 bytes
// iterate over the pwm_buffer contents at 16 byte intervals
for (int i = 0; i < 144; i += 16) {
// set the first register, e.g. 0x24, 0x34, 0x44, etc.
g_twi_transfer_buffer[0] = 0x24 + i;
// copy the data from i to i+15
// device will auto-increment register for data after the first byte
// thus this sets registers 0x24-0x33, 0x34-0x43, etc. in one transfer
for (int j = 0; j < 16; j++) {
g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j];
}
#if ISSI_PERSISTENCE > 0
for (uint8_t i = 0; i < ISSI_PERSISTENCE; i++) {
if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT) == 0)
break;
}
#else
i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, ISSI_TIMEOUT);
#endif
}
}
void IS31FL3731_init(uint8_t addr) {
// In order to avoid the LEDs being driven with garbage data
// in the LED driver's PWM registers, first enable software shutdown,
// then set up the mode and other settings, clear the PWM registers,
// then disable software shutdown.
// select "function register" bank
IS31FL3731_write_register(addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG);
// enable software shutdown
IS31FL3731_write_register(addr, ISSI_REG_SHUTDOWN, 0x00);
// this delay was copied from other drivers, might not be needed
// FIXME: Don't we have a wrapper for this already?
#ifdef __AVR__
_delay_ms(10);
#else
wait_ms(10);
#endif
// picture mode
IS31FL3731_write_register(addr, ISSI_REG_CONFIG, ISSI_REG_CONFIG_PICTUREMODE);
// display frame 0
IS31FL3731_write_register(addr, ISSI_REG_PICTUREFRAME, 0x00);
// audio sync off
IS31FL3731_write_register(addr, ISSI_REG_AUDIOSYNC, 0x00);
// select bank 0
IS31FL3731_write_register(addr, ISSI_COMMANDREGISTER, 0);
// turn off all LEDs in the LED control register
for (int i = 0x00; i <= 0x11; i++) {
IS31FL3731_write_register(addr, i, 0x00);
}
// turn off all LEDs in the blink control register (not really needed)
for (int i = 0x12; i <= 0x23; i++) {
IS31FL3731_write_register(addr, i, 0x00);
}
// set PWM on all LEDs to 0
for (int i = 0x24; i <= 0xB3; i++) {
IS31FL3731_write_register(addr, i, 0x00);
}
// select "function register" bank
IS31FL3731_write_register(addr, ISSI_COMMANDREGISTER, ISSI_BANK_FUNCTIONREG);
// disable software shutdown
IS31FL3731_write_register(addr, ISSI_REG_SHUTDOWN, 0x01);
// select bank 0 and leave it selected.
// most usage after initialization is just writing PWM buffers in bank 0
// as there's not much point in double-buffering
IS31FL3731_write_register(addr, ISSI_COMMANDREGISTER, 0);
}
void IS31FL3731_set_value(int index, uint8_t value) {
if (index >= 0 && index < DRIVER_LED_TOTAL) {
is31_led led = g_is31_leds[index];
// Subtract 0x24 to get the second index of g_pwm_buffer
g_pwm_buffer[led.driver][led.v - 0x24] = value;
g_pwm_buffer_update_required = true;
}
}
void IS31FL3731_set_value_all(uint8_t value) {
for (int i = 0; i < DRIVER_LED_TOTAL; i++) {
IS31FL3731_set_value(i, value);
}
}
void IS31FL3731_set_led_control_register(uint8_t index, bool value) {
is31_led led = g_is31_leds[index];
uint8_t control_register = (led.v - 0x24) / 8;
uint8_t bit_value = (led.v - 0x24) % 8;
if (value) {
g_led_control_registers[led.driver][control_register] |= (1 << bit_value);
} else {
g_led_control_registers[led.driver][control_register] &= ~(1 << bit_value);
}
g_led_control_registers_update_required = true;
}
void IS31FL3731_update_pwm_buffers(uint8_t addr, uint8_t index) {
if (g_pwm_buffer_update_required) {
IS31FL3731_write_pwm_buffer(addr, g_pwm_buffer[index]);
g_pwm_buffer_update_required = false;
}
}
void IS31FL3731_update_led_control_registers(uint8_t addr, uint8_t index) {
if (g_led_control_registers_update_required) {
for (int i=0; i<18; i++) {
IS31FL3731_write_register(addr, i, g_led_control_registers[index][i]);
}
}
}

209
drivers/issi/is31fl3731-simple.h
Unescape View File

@ -0,0 +1,209 @@
/* Copyright 2017 Jason Williams
* Copyright 2018 Jack Humbert
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef IS31FL3731_DRIVER_H
#define IS31FL3731_DRIVER_H
typedef struct is31_led {
uint8_t driver:2;
uint8_t v;
} __attribute__((packed)) is31_led;
extern const is31_led g_is31_leds[DRIVER_LED_TOTAL];
void IS31FL3731_init(uint8_t addr);
void IS31FL3731_write_register(uint8_t addr, uint8_t reg, uint8_t data);
void IS31FL3731_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer);
void IS31FL3731_set_value(int index, uint8_t value);
void IS31FL3731_set_value_all(uint8_t value);
void IS31FL3731_set_led_control_register(uint8_t index, bool value);
// This should not be called from an interrupt
// (eg. from a timer interrupt).
// Call this while idle (in between matrix scans).
// If the buffer is dirty, it will update the driver with the buffer.
void IS31FL3731_update_pwm_buffers(uint8_t addr, uint8_t index);
void IS31FL3731_update_led_control_registers(uint8_t addr, uint8_t index);
#define C1_1 0x24
#define C1_2 0x25
#define C1_3 0x26
#define C1_4 0x27
#define C1_5 0x28
#define C1_6 0x29
#define C1_7 0x2A
#define C1_8 0x2B
#define C1_9 0x2C
#define C1_10 0x2D
#define C1_11 0x2E
#define C1_12 0x2F
#define C1_13 0x30
#define C1_14 0x31
#define C1_15 0x32
#define C1_16 0x33
#define C2_1 0x34
#define C2_2 0x35
#define C2_3 0x36
#define C2_4 0x37
#define C2_5 0x38
#define C2_6 0x39
#define C2_7 0x3A
#define C2_8 0x3B
#define C2_9 0x3C
#define C2_10 0x3D
#define C2_11 0x3E
#define C2_12 0x3F
#define C2_13 0x40
#define C2_14 0x41
#define C2_15 0x42
#define C2_16 0x43
#define C3_1 0x44
#define C3_2 0x45
#define C3_3 0x46
#define C3_4 0x47
#define C3_5 0x48
#define C3_6 0x49
#define C3_7 0x4A
#define C3_8 0x4B
#define C3_9 0x4C
#define C3_10 0x4D
#define C3_11 0x4E
#define C3_12 0x4F
#define C3_13 0x50
#define C3_14 0x51
#define C3_15 0x52
#define C3_16 0x53
#define C4_1 0x54
#define C4_2 0x55
#define C4_3 0x56
#define C4_4 0x57
#define C4_5 0x58
#define C4_6 0x59
#define C4_7 0x5A
#define C4_8 0x5B
#define C4_9 0x5C
#define C4_10 0x5D
#define C4_11 0x5E
#define C4_12 0x5F
#define C4_13 0x60
#define C4_14 0x61
#define C4_15 0x62
#define C4_16 0x63
#define C5_1 0x64
#define C5_2 0x65
#define C5_3 0x66
#define C5_4 0x67
#define C5_5 0x68
#define C5_6 0x69
#define C5_7 0x6A
#define C5_8 0x6B
#define C5_9 0x6C
#define C5_10 0x6D
#define C5_11 0x6E
#define C5_12 0x6F
#define C5_13 0x70
#define C5_14 0x71
#define C5_15 0x72
#define C5_16 0x73
#define C6_1 0x74
#define C6_2 0x75
#define C6_3 0x76
#define C6_4 0x77
#define C6_5 0x78
#define C6_6 0x79
#define C6_7 0x7A
#define C6_8 0x7B
#define C6_9 0x7C
#define C6_10 0x7D
#define C6_11 0x7E
#define C6_12 0x7F
#define C6_13 0x80
#define C6_14 0x81
#define C6_15 0x82
#define C6_16 0x83
#define C7_1 0x84
#define C7_2 0x85
#define C7_3 0x86
#define C7_4 0x87
#define C7_5 0x88
#define C7_6 0x89
#define C7_7 0x8A
#define C7_8 0x8B
#define C7_9 0x8C
#define C7_10 0x8D
#define C7_11 0x8E
#define C7_12 0x8F
#define C7_13 0x90
#define C7_14 0x91
#define C7_15 0x92
#define C7_16 0x93
#define C8_1 0x94
#define C8_2 0x95
#define C8_3 0x96
#define C8_4 0x97
#define C8_5 0x98
#define C8_6 0x99
#define C8_7 0x9A
#define C8_8 0x9B
#define C8_9 0x9C
#define C8_10 0x9D
#define C8_11 0x9E
#define C8_12 0x9F
#define C8_13 0xA0
#define C8_14 0xA1
#define C8_15 0xA2
#define C8_16 0xA3
#define C9_1 0xA4
#define C9_2 0xA5
#define C9_3 0xA6
#define C9_4 0xA7
#define C9_5 0xA8
#define C9_6 0xA9
#define C9_7 0xAA
#define C9_8 0xAB
#define C9_9 0xAC
#define C9_10 0xAD
#define C9_11 0xAE
#define C9_12 0xAF
#define C9_13 0xB0
#define C9_14 0xB1
#define C9_15 0xB2
#define C9_16 0xB3
#endif // IS31FL3731_DRIVER_H

404
quantum/led_matrix.c
Unescape View File

@ -0,0 +1,404 @@
/* Copyright 2017 Jason Williams
* Copyright 2017 Jack Humbert
* Copyright 2018 Yiancar
* Copyright 2019 Clueboard
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stdint.h>
#include <stdbool.h>
#include "quantum.h"
#include "led_matrix.h"
#include "progmem.h"
#include "config.h"
#include "eeprom.h"
#include <string.h>
#include <math.h>
led_config_t led_matrix_config;
#ifndef MAX
#define MAX(X, Y) ((X) > (Y) ? (X) : (Y))
#endif
#ifndef MIN
#define MIN(a,b) ((a) < (b)? (a): (b))
#endif
#ifndef LED_DISABLE_AFTER_TIMEOUT
#define LED_DISABLE_AFTER_TIMEOUT 0
#endif
#ifndef LED_DISABLE_WHEN_USB_SUSPENDED
#define LED_DISABLE_WHEN_USB_SUSPENDED false
#endif
#ifndef EECONFIG_LED_MATRIX
#define EECONFIG_LED_MATRIX EECONFIG_RGBLIGHT
#endif
#if !defined(LED_MATRIX_MAXIMUM_BRIGHTNESS) || LED_MATRIX_MAXIMUM_BRIGHTNESS > 255
#define LED_MATRIX_MAXIMUM_BRIGHTNESS 255
#endif
bool g_suspend_state = false;
// Global tick at 20 Hz
uint32_t g_tick = 0;
// Ticks since this key was last hit.
uint8_t g_key_hit[DRIVER_LED_TOTAL];
// Ticks since any key was last hit.
uint32_t g_any_key_hit = 0;
uint32_t eeconfig_read_led_matrix(void) {
return eeprom_read_dword(EECONFIG_LED_MATRIX);
}
void eeconfig_update_led_matrix(uint32_t config_value) {
eeprom_update_dword(EECONFIG_LED_MATRIX, config_value);
}
void eeconfig_update_led_matrix_default(void) {
dprintf("eeconfig_update_led_matrix_default\n");
led_matrix_config.enable = 1;
led_matrix_config.mode = LED_MATRIX_UNIFORM_BRIGHTNESS;
led_matrix_config.val = 128;
led_matrix_config.speed = 0;
eeconfig_update_led_matrix(led_matrix_config.raw);
}
void eeconfig_debug_led_matrix(void) {
dprintf("led_matrix_config eprom\n");
dprintf("led_matrix_config.enable = %d\n", led_matrix_config.enable);
dprintf("led_matrix_config.mode = %d\n", led_matrix_config.mode);
dprintf("led_matrix_config.val = %d\n", led_matrix_config.val);
dprintf("led_matrix_config.speed = %d\n", led_matrix_config.speed);
}
// Last led hit
#define LED_HITS_TO_REMEMBER 8
uint8_t g_last_led_hit[LED_HITS_TO_REMEMBER] = {255};
uint8_t g_last_led_count = 0;
void map_row_column_to_led(uint8_t row, uint8_t column, uint8_t *led_i, uint8_t *led_count) {
led_matrix led;
*led_count = 0;
for (uint8_t i = 0; i < DRIVER_LED_TOTAL; i++) {
// map_index_to_led(i, &led);
led = g_leds[i];
if (row == led.matrix_co.row && column == led.matrix_co.col) {
led_i[*led_count] = i;
(*led_count)++;
}
}
}
void led_matrix_update_pwm_buffers(void) {
led_matrix_driver.flush();
}
void led_matrix_set_index_value(int index, uint8_t value) {
led_matrix_driver.set_value(index, value);
}
void led_matrix_set_index_value_all(uint8_t value) {
led_matrix_driver.set_value_all(value);
}
bool process_led_matrix(uint16_t keycode, keyrecord_t *record) {
if (record->event.pressed) {
uint8_t led[8], led_count;
map_row_column_to_led(record->event.key.row, record->event.key.col, led, &led_count);
if (led_count > 0) {
for (uint8_t i = LED_HITS_TO_REMEMBER; i > 1; i--) {
g_last_led_hit[i - 1] = g_last_led_hit[i - 2];
}
g_last_led_hit[0] = led[0];
g_last_led_count = MIN(LED_HITS_TO_REMEMBER, g_last_led_count + 1);
}
for(uint8_t i = 0; i < led_count; i++)
g_key_hit[led[i]] = 0;
g_any_key_hit = 0;
} else {
#ifdef LED_MATRIX_KEYRELEASES
uint8_t led[8], led_count;
map_row_column_to_led(record->event.key.row, record->event.key.col, led, &led_count);
for(uint8_t i = 0; i < led_count; i++)
g_key_hit[led[i]] = 255;
g_any_key_hit = 255;
#endif
}
return true;
}
void led_matrix_set_suspend_state(bool state) {
g_suspend_state = state;
}
// All LEDs off
void led_matrix_all_off(void) {
led_matrix_set_index_value_all(0);
}
// Uniform brightness
void led_matrix_uniform_brightness(void) {
led_matrix_set_index_value_all(led_matrix_config.val);
}
void led_matrix_custom(void) {}
void led_matrix_task(void) {
#ifdef TRACK_PREVIOUS_EFFECT
static uint8_t toggle_enable_last = 255;
#endif
if (!led_matrix_config.enable) {
led_matrix_all_off();
led_matrix_indicators();
#ifdef TRACK_PREVIOUS_EFFECT
toggle_enable_last = led_matrix_config.enable;
#endif
return;
}
// delay 1 second before driving LEDs or doing anything else
// FIXME: Can't we use wait_ms() here?
static uint8_t startup_tick = 0;
if (startup_tick < 20) {
startup_tick++;
return;
}
g_tick++;
if (g_any_key_hit < 0xFFFFFFFF) {
g_any_key_hit++;
}
for (int led = 0; led < DRIVER_LED_TOTAL; led++) {
if (g_key_hit[led] < 255) {
if (g_key_hit[led] == 254)
g_last_led_count = MAX(g_last_led_count - 1, 0);
g_key_hit[led]++;
}
}
// Factory default magic value
if (led_matrix_config.mode == 255) {
led_matrix_uniform_brightness();
return;
}
// Ideally we would also stop sending zeros to the LED driver PWM buffers
// while suspended and just do a software shutdown. This is a cheap hack for now.
bool suspend_backlight = ((g_suspend_state && LED_DISABLE_WHEN_USB_SUSPENDED) ||
(LED_DISABLE_AFTER_TIMEOUT > 0 && g_any_key_hit > LED_DISABLE_AFTER_TIMEOUT * 60 * 20));
uint8_t effect = suspend_backlight ? 0 : led_matrix_config.mode;
#ifdef TRACK_PREVIOUS_EFFECT
// Keep track of the effect used last time,
// detect change in effect, so each effect can
// have an optional initialization.
static uint8_t effect_last = 255;
bool initialize = (effect != effect_last) || (led_matrix_config.enable != toggle_enable_last);
effect_last = effect;
toggle_enable_last = led_matrix_config.enable;
#endif
// this gets ticked at 20 Hz.
// each effect can opt to do calculations
// and/or request PWM buffer updates.
switch (effect) {
case LED_MATRIX_UNIFORM_BRIGHTNESS:
led_matrix_uniform_brightness();
break;
default:
led_matrix_custom();
break;
}
if (! suspend_backlight) {
led_matrix_indicators();
}
}
void led_matrix_indicators(void) {
led_matrix_indicators_kb();
led_matrix_indicators_user();
}
__attribute__((weak))
void led_matrix_indicators_kb(void) {}
__attribute__((weak))
void led_matrix_indicators_user(void) {}
// void led_matrix_set_indicator_index(uint8_t *index, uint8_t row, uint8_t column)
// {
// if (row >= MATRIX_ROWS)
// {
// // Special value, 255=none, 254=all
// *index = row;
// }
// else
// {
// // This needs updated to something like
// // uint8_t led[8], led_count;
// // map_row_column_to_led(row,column,led,&led_count);
// // for(uint8_t i = 0; i < led_count; i++)
// map_row_column_to_led(row, column, index);
// }
// }
void led_matrix_init(void) {
led_matrix_driver.init();
// TODO: put the 1 second startup delay here?
// clear the key hits
for (int led=0; led<DRIVER_LED_TOTAL; led++) {
g_key_hit[led] = 255;
}
if (!eeconfig_is_enabled()) {
dprintf("led_matrix_init_drivers eeconfig is not enabled.\n");
eeconfig_init();
eeconfig_update_led_matrix_default();
}
led_matrix_config.raw = eeconfig_read_led_matrix();
if (!led_matrix_config.mode) {
dprintf("led_matrix_init_drivers led_matrix_config.mode = 0. Write default values to EEPROM.\n");
eeconfig_update_led_matrix_default();
led_matrix_config.raw = eeconfig_read_led_matrix();
}
eeconfig_debug_led_matrix(); // display current eeprom values
}
// Deals with the messy details of incrementing an integer
static uint8_t increment(uint8_t value, uint8_t step, uint8_t min, uint8_t max) {
int16_t new_value = value;
new_value += step;
return MIN(MAX( new_value, min), max );
}
static uint8_t decrement(uint8_t value, uint8_t step, uint8_t min, uint8_t max) {
int16_t new_value = value;
new_value -= step;
return MIN(MAX( new_value, min), max );
}
// void *backlight_get_custom_key_value_eeprom_address(uint8_t led) {
// // 3 bytes per value
// return EECONFIG_LED_MATRIX + (led * 3);
// }
// void backlight_get_key_value(uint8_t led, uint8_t *value) {
// void *address = backlight_get_custom_key_value_eeprom_address(led);
// value = eeprom_read_byte(address);
// }
// void backlight_set_key_value(uint8_t row, uint8_t column, uint8_t value) {
// uint8_t led[8], led_count;
// map_row_column_to_led(row,column,led,&led_count);
// for(uint8_t i = 0; i < led_count; i++) {
// if (led[i] < DRIVER_LED_TOTAL) {
// void *address = backlight_get_custom_key_value_eeprom_address(led[i]);
// eeprom_update_byte(address, value);
// }
// }
// }
uint32_t led_matrix_get_tick(void) {
return g_tick;
}
void led_matrix_toggle(void) {
led_matrix_config.enable ^= 1;
eeconfig_update_led_matrix(led_matrix_config.raw);
}
void led_matrix_enable(void) {
led_matrix_config.enable = 1;
eeconfig_update_led_matrix(led_matrix_config.raw);
}
void led_matrix_enable_noeeprom(void) {
led_matrix_config.enable = 1;
}
void led_matrix_disable(void) {
led_matrix_config.enable = 0;
eeconfig_update_led_matrix(led_matrix_config.raw);
}
void led_matrix_disable_noeeprom(void) {
led_matrix_config.enable = 0;
}
void led_matrix_step(void) {
led_matrix_config.mode++;
if (led_matrix_config.mode >= LED_MATRIX_EFFECT_MAX)
led_matrix_config.mode = 1;
eeconfig_update_led_matrix(led_matrix_config.raw);
}
void led_matrix_step_reverse(void) {
led_matrix_config.mode--;
if (led_matrix_config.mode < 1)
led_matrix_config.mode = LED_MATRIX_EFFECT_MAX - 1;
eeconfig_update_led_matrix(led_matrix_config.raw);
}
void led_matrix_increase_val(void) {
led_matrix_config.val = increment(led_matrix_config.val, 8, 0, LED_MATRIX_MAXIMUM_BRIGHTNESS);
eeconfig_update_led_matrix(led_matrix_config.raw);
}
void led_matrix_decrease_val(void) {
led_matrix_config.val = decrement(led_matrix_config.val, 8, 0, LED_MATRIX_MAXIMUM_BRIGHTNESS);
eeconfig_update_led_matrix(led_matrix_config.raw);
}
void led_matrix_increase_speed(void) {
led_matrix_config.speed = increment(led_matrix_config.speed, 1, 0, 3);
eeconfig_update_led_matrix(led_matrix_config.raw);//EECONFIG needs to be increased to support this
}
void led_matrix_decrease_speed(void) {
led_matrix_config.speed = decrement(led_matrix_config.speed, 1, 0, 3);
eeconfig_update_led_matrix(led_matrix_config.raw);//EECONFIG needs to be increased to support this
}
void led_matrix_mode(uint8_t mode, bool eeprom_write) {
led_matrix_config.mode = mode;
if (eeprom_write) {
eeconfig_update_led_matrix(led_matrix_config.raw);
}
}
uint8_t led_matrix_get_mode(void) {
return led_matrix_config.mode;
}
void led_matrix_set_value(uint8_t val, bool eeprom_write) {
led_matrix_config.val = val;
if (eeprom_write) {
eeconfig_update_led_matrix(led_matrix_config.raw);
}
}

142
quantum/led_matrix.h
Unescape View File

@ -0,0 +1,142 @@
/* Copyright 2017 Jason Williams
* Copyright 2017 Jack Humbert
* Copyright 2018 Yiancar
* Copyright 2019 Clueboard
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef LED_MATRIX_H
#define LED_MATRIX_H
typedef struct Point {
uint8_t x;
uint8_t y;
} __attribute__((packed)) Point;
typedef struct led_matrix {
union {
uint8_t raw;
struct {
uint8_t row:4; // 16 max
uint8_t col:4; // 16 max
};
} matrix_co;
Point point;
uint8_t modifier:1;
} __attribute__((packed)) led_matrix;
extern const led_matrix g_leds[DRIVER_LED_TOTAL];
typedef struct {
uint8_t index;
uint8_t value;
} led_indicator;
typedef union {
uint32_t raw;
struct {
bool enable :1;
uint8_t mode :6;
uint8_t hue :8; // Unused by led_matrix
uint8_t sat :8; // Unused by led_matrix
uint8_t val :8;
uint8_t speed :8;//EECONFIG needs to be increased to support this
};
} led_config_t;
enum led_matrix_effects {
LED_MATRIX_UNIFORM_BRIGHTNESS = 1,
// All new effects go above this line
LED_MATRIX_EFFECT_MAX
};
void led_matrix_set_index_value(int index, uint8_t value);
void led_matrix_set_index_value_all(uint8_t value);
// This runs after another backlight effect and replaces
// colors already set
void led_matrix_indicators(void);
void led_matrix_indicators_kb(void);
void led_matrix_indicators_user(void);
void led_matrix_init(void);
void led_matrix_setup_drivers(void);
void led_matrix_set_suspend_state(bool state);
void led_matrix_set_indicator_state(uint8_t state);
void led_matrix_task(void);
// This should not be called from an interrupt
// (eg. from a timer interrupt).
// Call this while idle (in between matrix scans).
// If the buffer is dirty, it will update the driver with the buffer.
void led_matrix_update_pwm_buffers(void);
bool process_led_matrix(uint16_t keycode, keyrecord_t *record);
uint32_t led_matrix_get_tick(void);
void led_matrix_toggle(void);
void led_matrix_enable(void);
void led_matrix_enable_noeeprom(void);
void led_matrix_disable(void);
void led_matrix_disable_noeeprom(void);
void led_matrix_step(void);
void led_matrix_step_reverse(void);
void led_matrix_increase_val(void);
void led_matrix_decrease_val(void);
void led_matrix_increase_speed(void);
void led_matrix_decrease_speed(void);
void led_matrix_mode(uint8_t mode, bool eeprom_write);
void led_matrix_mode_noeeprom(uint8_t mode);
uint8_t led_matrix_get_mode(void);
void led_matrix_set_value(uint8_t mode, bool eeprom_write);
#ifndef BACKLIGHT_ENABLE
#define backlight_toggle() backlight_matrix_toggle()
#define backlight_enable() backlight_matrix_enable()
#define backlight_enable_noeeprom() backlight_matrix_enable_noeeprom()
#define backlight_disable() backlight_matrix_disable()
#define backlight_disable_noeeprom() backlight_matrix_disable_noeeprom()
#define backlight_step() backlight_matrix_step()
#define backlight_set_value(val) backlight_matrix_set_value(val)
#define backlight_set_value_noeeprom(val) backlight_matrix_set_value_noeeprom(val)
#define backlight_step_reverse() backlight_matrix_step_reverse()
#define backlight_increase_val() backlight_matrix_increase_val()
#define backlight_decrease_val() backlight_matrix_decrease_val()
#define backlight_increase_speed() backlight_matrix_increase_speed()
#define backlight_decrease_speed() backlight_matrix_decrease_speed()
#define backlight_mode(mode) backlight_matrix_mode(mode)
#define backlight_mode_noeeprom(mode) backlight_matrix_mode_noeeprom(mode)
#define backlight_get_mode() backlight_matrix_get_mode()
#endif
typedef struct {
/* Perform any initialisation required for the other driver functions to work. */
void (*init)(void);
/* Set the brightness of a single LED in the buffer. */
void (*set_value)(int index, uint8_t value);
/* Set the brightness of all LEDS on the keyboard in the buffer. */
void (*set_value_all)(uint8_t value);
/* Flush any buffered changes to the hardware. */
void (*flush)(void);
} led_matrix_driver_t;
extern const led_matrix_driver_t led_matrix_driver;
#endif

147
quantum/led_matrix_drivers.c
Unescape View File

@ -0,0 +1,147 @@
/* Copyright 2018 Clueboard
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stdint.h>
#include <stdbool.h>
#include "quantum.h"
#include "led_matrix.h"
/* Each driver needs to define a struct:
*
* const led_matrix_driver_t led_matrix_driver;
*
* All members must be provided. Keyboard custom drivers must define this
* in their own files.
*/
#if defined(IS31FL3731) || defined(IS31FL3733)
#if defined(IS31FL3731)
#include "is31fl3731-simple.h"
#endif
#include "i2c_master.h"
static void init(void) {
i2c_init();
#ifdef IS31FL3731
#ifdef LED_DRIVER_ADDR_1
IS31FL3731_init(DRIVER_ADDR_1);
#endif
#ifdef LED_DRIVER_ADDR_2
IS31FL3731_init(DRIVER_ADDR_2);
#endif
#ifdef LED_DRIVER_ADDR_3
IS31FL3731_init(DRIVER_ADDR_3);
#endif
#ifdef LED_DRIVER_ADDR_4
IS31FL3731_init(DRIVER_ADDR_4);
#endif
#else
#ifdef LED_DRIVER_ADDR_1
IS31FL3733_init(DRIVER_ADDR_1);
#endif
#ifdef LED_DRIVER_ADDR_2
IS31FL3733_init(DRIVER_ADDR_2);
#endif
#ifdef LED_DRIVER_ADDR_3
IS31FL3733_init(DRIVER_ADDR_3);
#endif
#ifdef LED_DRIVER_ADDR_4
IS31FL3733_init(DRIVER_ADDR_4);
#endif
#endif
for (int index = 0; index < DRIVER_LED_TOTAL; index++) {
#ifdef IS31FL3731
IS31FL3731_set_led_control_register(index, true);
#else
IS31FL3733_set_led_control_register(index, true);
#endif
}
// This actually updates the LED drivers
#ifdef IS31FL3731
#ifdef LED_DRIVER_ADDR_1
IS31FL3731_update_led_control_registers(DRIVER_ADDR_1);
#endif
#ifdef LED_DRIVER_ADDR_2
IS31FL3731_update_led_control_registers(DRIVER_ADDR_2);
#endif
#ifdef LED_DRIVER_ADDR_3
IS31FL3731_update_led_control_registers(DRIVER_ADDR_3);
#endif
#ifdef LED_DRIVER_ADDR_4
IS31FL3731_update_led_control_registers(DRIVER_ADDR_4);
#endif
#else
#ifdef LED_DRIVER_ADDR_1
IS31FL3733_update_led_control_registers(DRIVER_ADDR_1);
#endif
#ifdef LED_DRIVER_ADDR_2
IS31FL3733_update_led_control_registers(DRIVER_ADDR_2);
#endif
#ifdef LED_DRIVER_ADDR_3
IS31FL3733_update_led_control_registers(DRIVER_ADDR_3);
#endif
#ifdef LED_DRIVER_ADDR_4
IS31FL3733_update_led_control_registers(DRIVER_ADDR_4);
#endif
#endif
}
static void flush(void) {
#ifdef IS31FL3731
#ifdef LED_DRIVER_ADDR_1
IS31FL3731_update_pwm_buffers(DRIVER_ADDR_1);
#endif
#ifdef LED_DRIVER_ADDR_2
IS31FL3731_update_pwm_buffers(DRIVER_ADDR_2);
#endif
#ifdef LED_DRIVER_ADDR_3
IS31FL3731_update_pwm_buffers(DRIVER_ADDR_3);
#endif
#ifdef LED_DRIVER_ADDR_4
IS31FL3731_update_pwm_buffers(DRIVER_ADDR_4);
#endif
#else
#ifdef LED_DRIVER_ADDR_1
IS31FL3733_update_pwm_buffers(DRIVER_ADDR_1);
#endif
#ifdef LED_DRIVER_ADDR_2
IS31FL3733_update_pwm_buffers(DRIVER_ADDR_2);
#endif
#ifdef LED_DRIVER_ADDR_3
IS31FL3733_update_pwm_buffers(DRIVER_ADDR_3);
#endif
#ifdef LED_DRIVER_ADDR_4
IS31FL3733_update_pwm_buffers(DRIVER_ADDR_4);
#endif
#endif
}
const led_matrix_driver_t led_matrix_driver = {
.init = init,
.flush = flush,
#ifdef IS31FL3731
.set_value = IS31FL3731_set_value,
.set_value_all = IS31FL3731_set_value_all,
#else
.set_value = IS31FL3733_set_value,
.set_value_all = IS31FL3733_set_value_all,
#endif
};
#endif

12
quantum/rgb_matrix.h
Unescape View File

@ -50,25 +50,17 @@ typedef struct rgb_led {
extern const rgb_led g_rgb_leds[DRIVER_LED_TOTAL];
typedef struct
{
HSV color;
uint8_t index;
} rgb_indicator;
typedef union {
uint32_t raw;
struct {
bool enable :1;
uint8_t mode :6;
uint16_t hue :9;
uint8_t sat :8;
uint8_t val :8;
uint8_t speed :8;//EECONFIG needs to be increased to support this
};
} rgb_config_t;
} led_config_t;
enum rgb_matrix_effects {
enum _matrix_effects {
RGB_MATRIX_SOLID_COLOR = 1,
#ifndef DISABLE_RGB_MATRIX_ALPHAS_MODS
RGB_MATRIX_ALPHAS_MODS,

Write Preview
Loading…
Cancel
Save