Tag:
Branch:
Tree:
json_audio
arm-dac-work
audio_out
b6_b7_audio
better_chibios_wait
changelog
clockworkpi
develop
edez2
eeprom_update
encoder_matrix
fix/get_report
fix/just_return_false
fix_template_bootmagic
gb_port
gc_switch
gh-pages
hailey_branch
json_audio
json_custom_keycodes
keyboard_overrides
keymap_folders
kle2json_hyper
led_matrix_direct
list_maintainers
make_cli_parsing
master
muon_light
muon_light_dc
olkb_vendor_folder
peasy
peb
pjrc_hid
planck-ez-a5-high
planck_ez_wdg
planck_ez_with_5372
planck_light_rev2
planck_thk
pre-develop-merge-nov20
python_optimizations
qmk_compile_build_keyboard
qmk_compile_improvements
qwiic_hub
qwiic_hud
qwiic_joystiic
refactor_process_record_kb_user
rgb7seg
subatomic
subatomic_encoders
subvendor_ids
titmlb
unorthodox
xap
xmega_support
zvecr-patch-1
0.10.0
0.10.1
0.10.10
0.10.11
0.10.12
0.10.13
0.10.14
0.10.15
0.10.16
0.10.17
0.10.18
0.10.19
0.10.2
0.10.20
0.10.21
0.10.22
0.10.23
0.10.24
0.10.25
0.10.26
0.10.27
0.10.28
0.10.29
0.10.3
0.10.30
0.10.31
0.10.32
0.10.33
0.10.34
0.10.35
0.10.36
0.10.37
0.10.38
0.10.39
0.10.4
0.10.40
0.10.41
0.10.42
0.10.43
0.10.44
0.10.45
0.10.46
0.10.47
0.10.48
0.10.49
0.10.5
0.10.50
0.10.51
0.10.52
0.10.53
0.10.54
0.10.6
0.10.7
0.10.8
0.10.9
0.11.0
0.11.1
0.11.10
0.11.11
0.11.12
0.11.13
0.11.14
0.11.15
0.11.16
0.11.17
0.11.18
0.11.19
0.11.2
0.11.20
0.11.21
0.11.22
0.11.23
0.11.24
0.11.25
0.11.26
0.11.27
0.11.28
0.11.29
0.11.3
0.11.30
0.11.31
0.11.32
0.11.33
0.11.34
0.11.35
0.11.36
0.11.37
0.11.38
0.11.39
0.11.4
0.11.40
0.11.41
0.11.42
0.11.43
0.11.44
0.11.45
0.11.46
0.11.47
0.11.48
0.11.49
0.11.5
0.11.50
0.11.51
0.11.52
0.11.53
0.11.54
0.11.55
0.11.56
0.11.57
0.11.58
0.11.59
0.11.6
0.11.60
0.11.61
0.11.62
0.11.63
0.11.64
0.11.65
0.11.66
0.11.67
0.11.68
0.11.69
0.11.7
0.11.70
0.11.8
0.11.9
0.12.0
0.12.1
0.12.10
0.12.11
0.12.12
0.12.13
0.12.14
0.12.15
0.12.16
0.12.17
0.12.18
0.12.19
0.12.2
0.12.20
0.12.21
0.12.22
0.12.23
0.12.24
0.12.25
0.12.26
0.12.27
0.12.28
0.12.29
0.12.3
0.12.30
0.12.31
0.12.32
0.12.33
0.12.34
0.12.35
0.12.36
0.12.37
0.12.38
0.12.39
0.12.4
0.12.40
0.12.41
0.12.42
0.12.43
0.12.44
0.12.45
0.12.46
0.12.47
0.12.48
0.12.49
0.12.5
0.12.50
0.12.51
0.12.52
0.12.6
0.12.7
0.12.8
0.12.9
0.13.0
0.13.1
0.13.10
0.13.11
0.13.12
0.13.13
0.13.14
0.13.15
0.13.16
0.13.17
0.13.18
0.13.19
0.13.2
0.13.20
0.13.21
0.13.22
0.13.23
0.13.24
0.13.25
0.13.26
0.13.27
0.13.28
0.13.29
0.13.3
0.13.30
0.13.31
0.13.32
0.13.33
0.13.34
0.13.35
0.13.36
0.13.37
0.13.38
0.13.4
0.13.5
0.13.6
0.13.7
0.13.8
0.13.9
0.14.0
0.14.1
0.14.10
0.14.11
0.14.12
0.14.13
0.14.14
0.14.15
0.14.16
0.14.17
0.14.18
0.14.19
0.14.2
0.14.20
0.14.21
0.14.22
0.14.23
0.14.24
0.14.25
0.14.26
0.14.27
0.14.28
0.14.29
0.14.3
0.14.30
0.14.31
0.14.32
0.14.33
0.14.4
0.14.5
0.14.6
0.14.7
0.14.8
0.14.9
0.15.0
0.15.1
0.15.10
0.15.11
0.15.12
0.15.13
0.15.14
0.15.15
0.15.16
0.15.17
0.15.18
0.15.19
0.15.2
0.15.20
0.15.21
0.15.22
0.15.23
0.15.24
0.15.25
0.15.3
0.15.4
0.15.5
0.15.6
0.15.7
0.15.8
0.15.9
0.16.0
0.16.1
0.16.2
0.16.3
0.16.4
0.16.5
0.16.6
0.16.7
0.16.8
0.16.9
0.17.0
0.17.1
0.17.2
0.17.3
0.17.4
0.17.5
0.5.0
0.5.1
0.5.10
0.5.100
0.5.101
0.5.102
0.5.103
0.5.104
0.5.105
0.5.106
0.5.107
0.5.108
0.5.109
0.5.11
0.5.110
0.5.111
0.5.112
0.5.113
0.5.114
0.5.115
0.5.116
0.5.117
0.5.118
0.5.119
0.5.12
0.5.120
0.5.121
0.5.122
0.5.123
0.5.124
0.5.125
0.5.126
0.5.127
0.5.128
0.5.129
0.5.13
0.5.130
0.5.131
0.5.132
0.5.133
0.5.134
0.5.135
0.5.136
0.5.137
0.5.138
0.5.139
0.5.14
0.5.140
0.5.141
0.5.142
0.5.143
0.5.144
0.5.145
0.5.146
0.5.147
0.5.148
0.5.149
0.5.15
0.5.150
0.5.151
0.5.152
0.5.153
0.5.154
0.5.155
0.5.156
0.5.157
0.5.158
0.5.159
0.5.16
0.5.160
0.5.161
0.5.162
0.5.163
0.5.164
0.5.165
0.5.166
0.5.167
0.5.168
0.5.169
0.5.17
0.5.170
0.5.171
0.5.172
0.5.173
0.5.174
0.5.175
0.5.176
0.5.177
0.5.178
0.5.179
0.5.180
0.5.181
0.5.182
0.5.183
0.5.184
0.5.185
0.5.186
0.5.187
0.5.188
0.5.189
0.5.190
0.5.191
0.5.192
0.5.193
0.5.194
0.5.195
0.5.196
0.5.197
0.5.198
0.5.199
0.5.2
0.5.20
0.5.200
0.5.201
0.5.202
0.5.203
0.5.204
0.5.205
0.5.206
0.5.207
0.5.208
0.5.209
0.5.21
0.5.210
0.5.211
0.5.212
0.5.213
0.5.214
0.5.215
0.5.216
0.5.217
0.5.218
0.5.219
0.5.22
0.5.220
0.5.221
0.5.222
0.5.223
0.5.224
0.5.225
0.5.226
0.5.227
0.5.228
0.5.229
0.5.23
0.5.230
0.5.231
0.5.232
0.5.233
0.5.234
0.5.235
0.5.236
0.5.237
0.5.238
0.5.239
0.5.24
0.5.240
0.5.241
0.5.242
0.5.243
0.5.244
0.5.245
0.5.246
0.5.247
0.5.248
0.5.249
0.5.25
0.5.250
0.5.251
0.5.252
0.5.253
0.5.254
0.5.255
0.5.256
0.5.257
0.5.258
0.5.259
0.5.26
0.5.260
0.5.261
0.5.262
0.5.263
0.5.264
0.5.27
0.5.28
0.5.29
0.5.3
0.5.30
0.5.31
0.5.32
0.5.33
0.5.34
0.5.35
0.5.36
0.5.37
0.5.38
0.5.39
0.5.4
0.5.40
0.5.41
0.5.42
0.5.43
0.5.44
0.5.45
0.5.46
0.5.47
0.5.48
0.5.49
0.5.5
0.5.50
0.5.51
0.5.52
0.5.53
0.5.54
0.5.55
0.5.56
0.5.57
0.5.58
0.5.59
0.5.6
0.5.60
0.5.61
0.5.62
0.5.63
0.5.64
0.5.65
0.5.66
0.5.67
0.5.68
0.5.69
0.5.7
0.5.70
0.5.71
0.5.72
0.5.73
0.5.74
0.5.75
0.5.76
0.5.77
0.5.78
0.5.79
0.5.8
0.5.80
0.5.81
0.5.82
0.5.83
0.5.84
0.5.85
0.5.86
0.5.87
0.5.88
0.5.89
0.5.9
0.5.90
0.5.91
0.5.92
0.5.93
0.5.94
0.5.95
0.5.96
0.5.97
0.5.98
0.5.99
0.6.0
0.6.1
0.6.10
0.6.100
0.6.101
0.6.102
0.6.103
0.6.104
0.6.105
0.6.106
0.6.107
0.6.108
0.6.109
0.6.11
0.6.110
0.6.111
0.6.112
0.6.113
0.6.114
0.6.115
0.6.116
0.6.117
0.6.118
0.6.119
0.6.12
0.6.120
0.6.121
0.6.122
0.6.123
0.6.124
0.6.125
0.6.126
0.6.127
0.6.128
0.6.129
0.6.13
0.6.130
0.6.131
0.6.132
0.6.133
0.6.134
0.6.135
0.6.136
0.6.137
0.6.138
0.6.139
0.6.14
0.6.140
0.6.141
0.6.142
0.6.143
0.6.144
0.6.145
0.6.146
0.6.147
0.6.148
0.6.149
0.6.15
0.6.150
0.6.151
0.6.152
0.6.153
0.6.154
0.6.155
0.6.156
0.6.157
0.6.158
0.6.159
0.6.16
0.6.160
0.6.161
0.6.162
0.6.163
0.6.164
0.6.165
0.6.166
0.6.167
0.6.168
0.6.169
0.6.17
0.6.170
0.6.171
0.6.172
0.6.173
0.6.174
0.6.175
0.6.176
0.6.177
0.6.178
0.6.179
0.6.18
0.6.180
0.6.181
0.6.182
0.6.183
0.6.184
0.6.185
0.6.186
0.6.187
0.6.188
0.6.189
0.6.19
0.6.190
0.6.191
0.6.192
0.6.193
0.6.194
0.6.195
0.6.196
0.6.197
0.6.198
0.6.199
0.6.2
0.6.20
0.6.200
0.6.201
0.6.202
0.6.203
0.6.204
0.6.205
0.6.206
0.6.207
0.6.208
0.6.209
0.6.21
0.6.210
0.6.211
0.6.212
0.6.213
0.6.214
0.6.215
0.6.216
0.6.217
0.6.218
0.6.219
0.6.22
0.6.220
0.6.221
0.6.222
0.6.223
0.6.224
0.6.225
0.6.226
0.6.227
0.6.228
0.6.229
0.6.23
0.6.230
0.6.231
0.6.232
0.6.233
0.6.234
0.6.235
0.6.236
0.6.237
0.6.238
0.6.239
0.6.24
0.6.240
0.6.241
0.6.242
0.6.243
0.6.244
0.6.245
0.6.246
0.6.247
0.6.248
0.6.249
0.6.25
0.6.250
0.6.251
0.6.252
0.6.253
0.6.254
0.6.255
0.6.256
0.6.257
0.6.258
0.6.259
0.6.26
0.6.260
0.6.261
0.6.262
0.6.263
0.6.264
0.6.265
0.6.266
0.6.267
0.6.268
0.6.269
0.6.27
0.6.270
0.6.271
0.6.272
0.6.273
0.6.274
0.6.275
0.6.276
0.6.277
0.6.278
0.6.279
0.6.28
0.6.280
0.6.281
0.6.282
0.6.283
0.6.284
0.6.285
0.6.286
0.6.287
0.6.288
0.6.289
0.6.29
0.6.290
0.6.291
0.6.292
0.6.293
0.6.294
0.6.295
0.6.296
0.6.297
0.6.298
0.6.299
0.6.3
0.6.30
0.6.300
0.6.301
0.6.302
0.6.303
0.6.304
0.6.305
0.6.306
0.6.307
0.6.308
0.6.309
0.6.31
0.6.310
0.6.311
0.6.312
0.6.313
0.6.314
0.6.315
0.6.316
0.6.317
0.6.318
0.6.319
0.6.32
0.6.320
0.6.321
0.6.322
0.6.323
0.6.324
0.6.325
0.6.326
0.6.327
0.6.328
0.6.329
0.6.33
0.6.330
0.6.331
0.6.332
0.6.333
0.6.334
0.6.335
0.6.336
0.6.337
0.6.338
0.6.339
0.6.34
0.6.340
0.6.341
0.6.342
0.6.343
0.6.344
0.6.345
0.6.346
0.6.347
0.6.348
0.6.349
0.6.35
0.6.350
0.6.351
0.6.352
0.6.353
0.6.354
0.6.355
0.6.356
0.6.357
0.6.358
0.6.359
0.6.36
0.6.360
0.6.361
0.6.362
0.6.363
0.6.364
0.6.365
0.6.366
0.6.367
0.6.368
0.6.369
0.6.37
0.6.370
0.6.371
0.6.372
0.6.373
0.6.374
0.6.375
0.6.376
0.6.377
0.6.378
0.6.379
0.6.38
0.6.380
0.6.381
0.6.382
0.6.383
0.6.384
0.6.385
0.6.386
0.6.387
0.6.388
0.6.389
0.6.39
0.6.390
0.6.391
0.6.392
0.6.393
0.6.394
0.6.395
0.6.396
0.6.397
0.6.398
0.6.399
0.6.4
0.6.40
0.6.400
0.6.401
0.6.402
0.6.403
0.6.404
0.6.405
0.6.406
0.6.407
0.6.408
0.6.409
0.6.41
0.6.410
0.6.411
0.6.412
0.6.413
0.6.414
0.6.415
0.6.416
0.6.417
0.6.418
0.6.419
0.6.42
0.6.420
0.6.421
0.6.422
0.6.423
0.6.424
0.6.425
0.6.426
0.6.427
0.6.428
0.6.429
0.6.43
0.6.430
0.6.431
0.6.432
0.6.433
0.6.434
0.6.435
0.6.436
0.6.437
0.6.438
0.6.439
0.6.44
0.6.440
0.6.441
0.6.442
0.6.443
0.6.444
0.6.445
0.6.446
0.6.447
0.6.448
0.6.449
0.6.45
0.6.450
0.6.451
0.6.452
0.6.453
0.6.454
0.6.455
0.6.456
0.6.457
0.6.458
0.6.459
0.6.46
0.6.460
0.6.461
0.6.462
0.6.463
0.6.464
0.6.47
0.6.48
0.6.49
0.6.5
0.6.50
0.6.51
0.6.52
0.6.53
0.6.54
0.6.55
0.6.56
0.6.57
0.6.58
0.6.59
0.6.6
0.6.60
0.6.61
0.6.62
0.6.63
0.6.64
0.6.65
0.6.66
0.6.67
0.6.68
0.6.69
0.6.7
0.6.70
0.6.71
0.6.72
0.6.73
0.6.74
0.6.75
0.6.76
0.6.77
0.6.78
0.6.79
0.6.8
0.6.80
0.6.81
0.6.82
0.6.83
0.6.84
0.6.85
0.6.86
0.6.87
0.6.88
0.6.89
0.6.9
0.6.90
0.6.91
0.6.92
0.6.93
0.6.94
0.6.95
0.6.96
0.6.97
0.6.98
0.6.99
0.7.0
0.7.1
0.7.10
0.7.100
0.7.101
0.7.102
0.7.103
0.7.104
0.7.105
0.7.106
0.7.107
0.7.108
0.7.109
0.7.11
0.7.110
0.7.111
0.7.112
0.7.113
0.7.114
0.7.115
0.7.116
0.7.117
0.7.118
0.7.119
0.7.12
0.7.120
0.7.121
0.7.122
0.7.123
0.7.124
0.7.125
0.7.126
0.7.127
0.7.128
0.7.129
0.7.13
0.7.130
0.7.131
0.7.132
0.7.133
0.7.134
0.7.135
0.7.136
0.7.137
0.7.138
0.7.139
0.7.14
0.7.140
0.7.141
0.7.142
0.7.143
0.7.144
0.7.145
0.7.146
0.7.147
0.7.148
0.7.149
0.7.15
0.7.150
0.7.151
0.7.152
0.7.153
0.7.154
0.7.155
0.7.156
0.7.157
0.7.158
0.7.159
0.7.16
0.7.160
0.7.161
0.7.162
0.7.163
0.7.164
0.7.165
0.7.166
0.7.167
0.7.168
0.7.169
0.7.17
0.7.170
0.7.171
0.7.172
0.7.18
0.7.19
0.7.2
0.7.20
0.7.21
0.7.22
0.7.23
0.7.24
0.7.25
0.7.26
0.7.27
0.7.28
0.7.29
0.7.3
0.7.30
0.7.31
0.7.32
0.7.33
0.7.34
0.7.35
0.7.36
0.7.37
0.7.38
0.7.39
0.7.4
0.7.40
0.7.41
0.7.42
0.7.43
0.7.44
0.7.45
0.7.46
0.7.47
0.7.48
0.7.49
0.7.5
0.7.50
0.7.51
0.7.52
0.7.53
0.7.54
0.7.55
0.7.56
0.7.57
0.7.58
0.7.59
0.7.6
0.7.60
0.7.61
0.7.62
0.7.63
0.7.64
0.7.65
0.7.66
0.7.67
0.7.68
0.7.69
0.7.7
0.7.70
0.7.71
0.7.72
0.7.73
0.7.74
0.7.75
0.7.76
0.7.77
0.7.78
0.7.79
0.7.8
0.7.80
0.7.81
0.7.82
0.7.83
0.7.84
0.7.85
0.7.86
0.7.87
0.7.88
0.7.89
0.7.9
0.7.90
0.7.91
0.7.92
0.7.93
0.7.94
0.7.95
0.7.96
0.7.97
0.7.98
0.7.99
0.8.0
0.8.1
0.8.10
0.8.100
0.8.101
0.8.102
0.8.103
0.8.104
0.8.105
0.8.106
0.8.107
0.8.108
0.8.109
0.8.11
0.8.110
0.8.111
0.8.112
0.8.113
0.8.114
0.8.115
0.8.116
0.8.117
0.8.118
0.8.119
0.8.12
0.8.120
0.8.121
0.8.122
0.8.123
0.8.124
0.8.125
0.8.126
0.8.127
0.8.128
0.8.129
0.8.13
0.8.130
0.8.131
0.8.132
0.8.133
0.8.134
0.8.135
0.8.136
0.8.137
0.8.138
0.8.139
0.8.14
0.8.140
0.8.141
0.8.142
0.8.143
0.8.144
0.8.145
0.8.146
0.8.147
0.8.148
0.8.149
0.8.15
0.8.150
0.8.151
0.8.152
0.8.153
0.8.154
0.8.155
0.8.156
0.8.157
0.8.158
0.8.159
0.8.16
0.8.160
0.8.161
0.8.162
0.8.163
0.8.164
0.8.165
0.8.166
0.8.167
0.8.168
0.8.169
0.8.17
0.8.170
0.8.171
0.8.172
0.8.173
0.8.174
0.8.175
0.8.176
0.8.177
0.8.178
0.8.179
0.8.18
0.8.180
0.8.181
0.8.182
0.8.183
0.8.184
0.8.185
0.8.186
0.8.187
0.8.188
0.8.189
0.8.19
0.8.190
0.8.191
0.8.192
0.8.2
0.8.20
0.8.21
0.8.22
0.8.23
0.8.24
0.8.25
0.8.26
0.8.27
0.8.28
0.8.29
0.8.3
0.8.30
0.8.31
0.8.32
0.8.33
0.8.34
0.8.35
0.8.36
0.8.37
0.8.38
0.8.39
0.8.4
0.8.40
0.8.41
0.8.42
0.8.43
0.8.44
0.8.45
0.8.46
0.8.47
0.8.48
0.8.49
0.8.5
0.8.50
0.8.51
0.8.52
0.8.53
0.8.54
0.8.55
0.8.56
0.8.57
0.8.58
0.8.59
0.8.6
0.8.60
0.8.61
0.8.62
0.8.63
0.8.64
0.8.65
0.8.66
0.8.67
0.8.68
0.8.69
0.8.7
0.8.70
0.8.71
0.8.72
0.8.73
0.8.74
0.8.75
0.8.76
0.8.77
0.8.78
0.8.79
0.8.8
0.8.80
0.8.81
0.8.82
0.8.83
0.8.84
0.8.85
0.8.86
0.8.87
0.8.88
0.8.89
0.8.9
0.8.90
0.8.91
0.8.92
0.8.93
0.8.94
0.8.95
0.8.96
0.8.97
0.8.98
0.8.99
0.9.0
0.9.1
0.9.10
0.9.11
0.9.12
0.9.13
0.9.14
0.9.15
0.9.16
0.9.17
0.9.18
0.9.19
0.9.2
0.9.20
0.9.21
0.9.22
0.9.23
0.9.24
0.9.25
0.9.26
0.9.27
0.9.28
0.9.29
0.9.3
0.9.30
0.9.31
0.9.32
0.9.33
0.9.34
0.9.35
0.9.36
0.9.37
0.9.38
0.9.39
0.9.4
0.9.40
0.9.41
0.9.42
0.9.43
0.9.44
0.9.45
0.9.46
0.9.47
0.9.48
0.9.49
0.9.5
0.9.50
0.9.51
0.9.52
0.9.53
0.9.54
0.9.55
0.9.56
0.9.57
0.9.58
0.9.59
0.9.6
0.9.7
0.9.8
0.9.9
LUFA-111009
LUFA-130901
LUFA-130901-BETA
LUFA-140302
LUFA-140928
LUFA-151115
LUFA-170418
breakpoint_2019_08_30
breakpoint_2019_11_30
breakpoint_2020_02_29
breakpoint_2021_05_29
breakpoint_2021_08_28
breakpoint_2021_11_27
breakpoint_2022_05_28
drop-1.0.0
ergodox_ez-161205
gh60-0.1
planck-4.0
planck-4.1
planck-4.2
planck-5.0
planck-6.0
planck-6.1
planck-light-1.0
preonic-1.0
preonic-2.0
v4.0
${ noResults }
10 Commits (json_audio)
| Author | SHA1 | Message | Date |
|---|---|---|---|
James Young
|
1646c0f26c
|
2021 May 29 Breaking Changes Update (#13034)
* Add Per Key functionality for AutoShift (#11536) * LED Matrix: Reactive effect buffers & advanced indicators (#12588) * [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626) * [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625) * LED Matrix: Split (#12633) * [CI] Format code according to conventions (#12650) * feat: infinite timeout for leader key (#6580) * feat: implement leader_no_timeout logic * docs(leader_key): infinite leader timeout docs * Format code according to conventions (#12680) * Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403) * Fix default ADC_RESOLUTION for ADCv3 (and ADCv4) Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers (that macro should not have been there, because ADCv3 has CFGR instead of CFGR1). Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS if it is defined (that name is used for ADCv3 and ADCv4). * Update ADC docs to match the actually used resolution ADC driver for ChibiOS actually uses the 10-bit resolution by default (probably to match AVR); fix the documentation accordingly. Also add both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names differ according to the ADC implementation in the particular MCU). * Fix pinToMux() for B12 and B13 on STM32F3xx Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and B13 pins were wrong. * Add support for all possible analog pins on STM32F1xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx (they are the same at least for STM32F103x8 and larger F103 devices, and also F102, F105, F107 families). Actually tested on STM32F103C8T6 (therefore pins C0...C5 were not tested). Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages, cannot be supported at the moment, because those pins are connected only to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1. * Add support for all possible analog pins on STM32F4xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally F3...F10 (if STM32_ADC_USE_ADC3 is enabled). These mux values are apparently the same for all F4xx devices, except some smaller devices may not have ADC3. Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested. Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices which don't have ADC3 also don't have the GPIOF port, therefore the code which refers to Fx pins does not compile. * Fix STM32F3xx ADC mux table in documentation The ADC driver documentation had some errors in the mux table for STM32F3xx. Fix this table to match the datasheet and the actual code (mux settings for B12 and B13 were also tested on a real STM32F303CCT6 chip). * Add STM32F1xx ADC pins to the documentation * Add STM32F4xx ADC pins to the documentation * Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600) * Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example. * Update flashing.md * Update chconf.h * Update config.h * Update halconf.h * Update mcuconf.h * eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671) * Add support for MCU = STM32F446 (#12619) * Add support for MCU = STM32F446 * Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h * Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64 * stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled. * Format code according to conventions (#12682) * Format code according to conventions (#12687) * Add STM32L433 and L443 support (#12063) * initial L433 commit * change to XC * fix L433 * disable all peripherals * update system and peripheral clocks * 433 change * use its own board files * revert its own board files * l433 specific change * fix stm32l432xx define * remove duplicate #define * fix bootloader jump * move to L443xx and add i2c2, spi2, usart3 to mcuconf.h * move to L443 * move to L443 * fix sdmmc in mcuconf.h * include STM32L443 * add L443 * Include L443 in compatible microcontrollers * Include L443 in compatible microcontrollers * Update config bootloader jump description * Update ChibiOS define reasoning * Update quantum/mcu_selection.mk * fix git conflict * Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613) * Fix bad PR merge for #6580. (#12721) * Change RGB/LED Matrix to use a simple define for USB suspend (#12697) * [CI] Format code according to conventions (#12731) * Fixing transport's led/rgb matrix suspend state logic (#12770) * [CI] Format code according to conventions (#12772) * Fix comment parsing (#12750) * Added OLED fade out support (#12086) * fix some references to bin/qmk that slipped in (#12832) * Resolve a number of warnings in `qmk generate-api` (#12833) * New command: qmk console (#12828) * stash poc * stash * tidy up implementation * Tidy up slightly for review * Tidy up slightly for review * Bodge environment to make tests pass * Refactor away from asyncio due to windows issues * Filter devices * align vid/pid printing * Add hidapi to the installers * start preparing for multiple hid_listeners * udev rules for hid_listen * refactor to move closer to end state * very basic implementation of the threaded model * refactor how vid/pid/index are supplied and parsed * windows improvements * read the report directly when usage page isn't available * add per-device colors, the choice to show names or numbers, and refactor * add timestamps * Add support for showing bootloaders * tweak the color for bootloaders * Align bootloader disconnect with connect color * add support for showing all bootloaders * fix the pyusb check * tweaks * fix exception * hide a stack trace behind -v * add --no-bootloaders option * add documentation for qmk console * Apply suggestions from code review * pyformat * clean up and flesh out KNOWN_BOOTLOADERS * Remove pointless SERIAL_LINK_ENABLE rules (#12846) * Make Swap Hands use PROGMEM (#12284) This converts the array that the Swap Hands feature uses to use PROGMEM, and to read from that array, as such. Since this array never changes at runtime, there is no reason to keep it in memory. Especially for AVR boards, as memory is a precious resource. * Fix another bin/qmk reference (#12856) * [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419) * Fixup build errors on `develop` branch. (#12723) * LED Matrix: Effects! (#12651) * Fix syntax error when compiling for ARM (#12866) * Remove KEYMAP and LAYOUT_kc (#12160) * alias KEYMAP to LAYOUT * remove KEYMAP and LAYOUT_kc * Add setup, clone, and env to the list of commands we allow even with broken modules (#12868) * Rename `point_t` -> `led_point_t` (#12864) * [Keyboard] updated a vendor name / fixed minor keymap issues (#12881) * Add missing LED Matrix suspend code to suspend.c (#12878) * LED Matrix: Documentation (#12685) * Deprecate `send_unicode_hex_string()` (#12602) * Fix spelling mistake regarding LED Matrix in split_common. (#12888) * [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895) * Use milc.subcommand.config instead of qmk.cli.config (#12915) * Use milc.subcommand.config instead * pyformat * remove the config test * Add function to allow repeated blinking of one layer (#12237) * Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time * Update doc * Rework rgblight blinking according to requested change * optimize storage * Fixup housekeeping from being invoked twice per loop. (#12933) * matrix: wait for row signal to go HIGH for every row (#12945) I noticed this discrepancy (last row of the matrix treated differently than the others) when optimizing the input latency of my keyboard controller, see also https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/ Before this commit, when tuning the delays I noticed ghost key presses when pressing the F2 key, which is on the last row of the keyboard matrix: the dead_grave key, which is on the first row of the keyboard matrix, would be incorrectly detected as pressed. After this commit, all keyboard matrix rows are interpreted correctly. I suspect that my setup is more susceptible to this nuance than others because I use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask the problem. * ensure we do not conflict with existing keymap aliases (#12976) * Add support for up to 4 IS31FL3733 drivers (#12342) * Convert Encoder callbacks to be boolean functions (#12805) * [Keyboard] Fix Terrazzo build failure (#12977) * Do not hard set config in CPTC files (#11864) * [Keyboard] Corne - Remove legacy revision support (#12226) * [Keymap] Update to Drashna keymap and user code (based on develop) (#12936) * Add Full-duplex serial driver for ARM boards (#9842) * Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987) * Backlight: add defines for default level and breathing state (#12560) * Add dire message about LUFA mass storage bootloader (#13014) * [Keyboard] Remove redundant legacy and common headers for crkbd (#13023) Was causing compiler errors on some systems. * Fix keyboards/keymaps for boolean encoder callback changes (#12985) * `backlight.c`: include `eeprom.h` (#13024) * Add changelog for 2021-05-29 Breaking Changes merge (#12939) * Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version * Add recent develop changes * Sort recent develop changes * Remove sections for ChibiOS changes per tzarc No ChibiOS changes this round. * Add and sort recent develop changes * add notes about keyboard moves/deletions * import changelog for PR 12172 Documents the change to BOOTMAGIC_ENABLE. * update section headings * re-sort changelog * add additional note regarding Bootmagic changes * remove changelog timestamp * update dates in main Breaking Changes docs * fix broken section anchors in previous changelogs * add link to backlight/eeprom patch to changelog * highlight some more changes * link PRs from section headers * Restore standard readme * run: qmk cformat --core-only |
4 years ago |
Joel Challis
|
415a8bc249
|
ARM - Refactor SLEEP_LED to support more platforms (#8403)
* Initial refactor of ARM SLEEP_LED to enable more platforms * fix build issues * Disable SLEEP_LED for boards with no caps lock code * Enable GPT14 for boards with caps lock code and SLEEP_LED enabled * Enable GPT for boards with caps lock code and SLEEP_LED enabled |
4 years ago |
Andrew Kannan
|
17d0f6338e
|
[Keyboard] ProjectKB Alice rev2 (#8718)
* Add revision 1 and revision 2 to ProjectKB Alice PCB * Swap SLEEP LED to no * Basic root rules.mk * Apply suggestions from code review * Update keyboards/projectkb/alice/rules.mk |
5 years ago |
Andrew Kannan
|
0a643be39e
|
Update 072 based CannonKeys boards to rely on core QMK support (#8716)
* Swap CannonKeys 072 boards over to rely on core QMK backlight support * Rename keymap * Rename via_tsangan back to via |
5 years ago |
|
Joel Challis
|
6c8e205fc0
|
Remove keyboard level ws2812 spi drivers (#7694)
|
5 years ago |
Ryan Miguel
|
73f903906e
|
VIA support for projectkb/alice (#8474)
* Create rules.mk Added rules.mk in keymaps/via * Update rules.mk Added new line at the end of the file * Create via\keymap.c Added keymap.c inside the via directory * Update config.h in projectkb/alice Defined VIA eeprom layout size to 2 bits to allow for 4 layout options |
5 years ago |
Ryan
|
bff56aa46c
|
Remove "ugly hack in usb_main.c" comments (#8296)
|
5 years ago |
Wilba
|
484a9b12bc |
Add VIA support for QMK backlight, QMK RGBLight (#7911)
* Add VIA support for QMK backlight, QMK RGBLight * clang-format changes |
5 years ago |
|
Wilba
|
320822d75b |
VIA Configurator Refactor (#7268)
* VIA Refactor * Remove old code * review changes * review changes * Fix cannonkeys/satisfaction75/prototype:via build * Add via.h to quantum.h * Move backlight init to after backlight config load * Merge branch 'master' into via_refactor_pr * Update user's rules.mk to new way of enabling VIA * Added id_switch_matrix_state * Review changes |
5 years ago |
Sid Carter
|
0e153781f0 |
[Keymap] Update keymap for alice and fix for ctrl and os swap (#6642)
* update map for alice and fix for via boards * enable bootmagic |
6 years ago |
|
Andrew Kannan
|
c2f9e018ab |
[Keyboard] Add ProjectKeyboard Alice PCB to QMK (#5581)
* Update instant60 for tsangan version * Add project alice keyboard * remove * Remove commented out code * Update readme * Add newline * Update keyboards/projectkb/alice/readme.md Co-Authored-By: awkannan <andrew.kannan@klaviyo.com> * Update keyboards/projectkb/alice/halconf.h Co-Authored-By: awkannan <andrew.kannan@klaviyo.com> * Update keyboards/projectkb/alice/halconf.h Co-Authored-By: awkannan <andrew.kannan@klaviyo.com> * Fix ifdef and use helper macros * Add reset keycode * udpate keymap * Add RGB Keycodes * Styling things * remove unused enum * fix |
6 years ago |
|
Andrew Kannan
|
99a8628383 |
[Keyboard] CannonKeys Instant60 Keyboard (#5433)
* Instant 60
* Instant60 changes again
* turn off LSE and features
* Working RGB underglow 🎉
* Add missing files
* Update keymap to have reset
* Backlighting on
* Backlight code for instant60
* Move 072 files to common folder and use it in Instant60
* Updates
* Update keyboards/cannonkeys/instant60/rules.mk
Co-Authored-By: awkannan <andrew.kannan@klaviyo.com>
|
6 years ago |
|
Andrew Kannan
|
7186d1581a |
Moving cannonkeys boards to one place, eeprom fix (#4999)
* Move boards to cannonkeys and share resources * Share common files between cannonkey boards * Fix ortho60 keymap * update LED numbers * Add RGB keys to Ortho60 and Ortho48 * Add Backlight control to default layout Ortho60 and 48 * Remove unnecessary ws2812.c SRC from rules.mk |
6 years ago |
|
Andrew Kannan
|
0f507f0169 |
Practice60 RGB and PWM Backlight (#4929)
* Update Practice60 to enable RGB via SPI DMA and use PWM backlight breathing * Correct stm32f103c8t6 flash size in eeprom definition * Remove unused files and improve ifdef checks * Update quantum/rgblight.c Co-Authored-By: awkannan <andrew.kannan@klaviyo.com> * Update quantum/rgblight.c Co-Authored-By: awkannan <andrew.kannan@klaviyo.com> * EEPROM implementation fix and updated p60 code * Update define * Remove dead code * Update keymap to remove test key * Update keymap again |
6 years ago |
Drashna Jaelre
|
b05c0e46c6 |
Adds a default value for IS_COMMAND for COMMAND feature (#4301)
* Add default value for IS_COMMAND for COMMAND feature * Cleanup and consistency * Update Templates to reflect change * Fix IS_COMMAND in template * Fix IS_COMMAND define * Use consistent IS_COMMAND block in templates * Remove unnecessary `#undef IS_COMMAND` directives * Fix compile issue on orthodox * Reomve IS_COMMAND option for newer boards * Remove all existing definitions of IS_COMMAND if they use default LSHIFT and RSHIFT setting * Remove a couple of additional IS_COMMAND defines * Remove remaining redundant IS_COMMAND definitions * Remove #undef IS_COMMAND from orthodox:drashna and whitefox:konstantin * Remove multiple empty lines in modified config.h files * Update additional boards * Reomve IS_COMMAND from newer boards * Update Alice keyboard * Remove IS_COMMAND from additional boards Jan 24th edition |
6 years ago |
|
Andrew Kannan
|
e653cc198e |
The "Practice60" Board, Blue Pill powered (#4407)
* Starting point for blue pill based practice60 * Changes * add * try raw bin no botloader * swap back to bootloader version * edit * Remove debug LED flash * Disable JTAG to open up B3 and B4 * Add led backlight support (no breathing yet) * Update matrix for correctness * RGB Underglow working in a very simple state * not as bright * Move to handwired * revert ChibiOS_Test changes * Changes based on PR comments * Address PR comments v2 * Move files |
7 years ago |
fredizzimo
|
53ff8a31b6 |
Merge ChibiOS and LUFA descriptor support (#2362)
* Move lufa descriptor to protocol/usb_descriptor * Try to compile usb_descriptor on ChibiOS * Add lufa_utils for ChibiOS Lufa USB descriptors for ChibiOS * More lufa_util compatibility fixes * First compiling version of shared USB descriptor * Send the usb descriptors * Fix the CONSOLE output on ChibiOS * Add errors for unsupported interfaces * Enable support for vitual serial port USB descriptors * Implement virtual serial port for ChibiOS * Cleanup the lufa_utils Use the default lufa header files * Add raw hid support for ChibiOS This is completely untested * Enable midi compilation on ChibiOS * Move midi functionality out of lufa.c * Don't register sysex callback when not needed * ChibiOS compilation fixes * Update ChibiOS submodule * Fix the Midi USB descriptor It didn't work properly when both Midi and Virtual serial port was enabled. * Add MIDI support for ChibiOS * Fix USB descriptor strings on ChibiOS * Use serial usb driver for raw hid * Generalize the ChibiOS stream like drivers This makes the initialization much more simple and eliminates a lot of the code duplication. * Convert console output to chibios stream driver * Fixes for ChibiOS update * Update the ChibiOS contrib submodule To include the usb data toggle synchronization fixes * Fix duplicate reset enumeration on ChibiOS * Add missing include * Add number of endpoints check for ChibiOS * Enable serial USB driver on all keyboards * Add missing includes when API is enabled withot midi * Add another missing inlcude |
7 years ago |
|
Fred Sundvik
|
6e4f2e18e6 |
Don't include common_config.h for ChibiOS test
|
9 years ago |
|
Fred Sundvik
|
b11657d1c8 |
Suprojects for ChibiOS testing
|
9 years ago |
|
fredizzimo
|
4d4f7684e6 |
Add ChibiOS support for QMK (#465)
* Modularity and gcc warnings fixes. * Add ChibiOS support (USB stack + support files). * Make usb_main more USB_DRIVER #define independent. * Move chibios to tool. * Implement jump-to-bootloader. * Small updates. * Fix bootloader-jump compiling. * Move AVR specific sleep_led.c into avr. * Add basic sleep_led for chibios. * Update chibios README. * NKRO fixes. * Rename some Makefile defines. * Move STM32 bootloader address config to separate .h file. * Add ARM Teensies bootloader code. * Fix chibios/usb_main GET_REPORT handing. * Add missing #include to keymap.c. * Make bootmagic.c code portable (_delay_ms -> wait_ms). * Move declaration of keymap_config. Should really not declare variables in .h files - since it's included in different .c files, a proper linker then complains that the same variable is declared more than once (once for each .c file that the offending .h is included in). * Add eeprom support for chibios/kinetis. * Rename chibios example keyboard. * Move chibios/cortex selection to local Makefiles. * Chibios: use WFI in idle. WIP suspend stuff. * ChibiOS/kinetis: sending remote wakeup. * ChibiOS/STM32: send remote wakeup. * Fix report size of boot protocol. * Fix drop key stroke Keyboard report should be checked if its transfer finishs successfully. Otherwise key stroke can be missing when other key event occurs before the last report transfer is done. Boot protocol 10ms interval probably causes this problem in case it receives key events in a row within the period. NKRO protocol suffers less or nothing due to its interval 1ms. * Chibios/usb_main: rename a variable for clarity. * Add correct chibios/bootloader_jump for infinity KB. * ChibiOS: make reset request more CMSISy. * Chibios: Add breathing sleep LED on Kinetis MCUs. * ChibiOS: Update infinity bootloader code to match updated ChibiOS. * ChibiOS: prettify/document sleep_led code. * Chibios: Remove the wait in the main loop. * Add maple mini code. * Do timeout when writing to CONSOLE EP queue. Fixes TMK bug #266. * Chibios: add 'core/protocol' to the makefiles' search path. * Chibios: Update to new USB API. * Chibios: add more guards for transmitting (fix a deadlock bug). * Add update for chibios in README * Chibios: Fix a HardFault bug (wait after start). * Chibios: cleanup usb_main code. * Chibios: Revert common.mk change (fix AVR linking problem). * core: Fix chibios user compile options Compile options can be defined in project Makefile such as UDEFS, UADEFS, UINCDIR, ULIBDIR and ULIBS. * Sysv format for ChibiOS arm-none-eabi-size Some new patches to ChibiOS puts heap as it's own section. So the berkeley format is now useless, as the heap will be included in the BSS report. The sysv format displays the bss size correctly. * Fix hard-coded path of CHIBIOS * Add support for new version of ChibiOS and Contrib The Kinetis support has moved to a separate Contrib repository in the newest version of Chibios. There has also been some structure changes. So this adds support for those, while maintaining back- wards compability. * Update ChibiOS instructions * Chibios: implement sleep LED for STM32. * Chibios: Update the main chibios README. * Chibios: fix STM32_BOOTLOADER_ADDRESS name. * Chibios: make the default bootloader_jump redefinable (weak). * Chibios: disable LTO (link-time optimisation). With LTO enabled, sometimes things fail for mysterious reasons (e.g. bootloader jump on WF with LEDs enabled), just because the linker optimisation is too aggressive. * Chibios: add default location for chibios-contrib. * ChibiOS: update mk to match chibios/master. * ChibiOS: update instructions.md. * Add chibi_onekey example. * Add comments to chibi_onekey Makefile. * Rename some Makefile defines. * Move STM32 bootloader address config to separate .h file. * Rename chibios example keyboard. * Move chibios/cortex selection to local Makefiles. * Add Teensy LC onekey example. * Chibios: use WFI in idle. WIP suspend stuff. * Update chibi/teensy instructions. * Update chibios/Teensy instructions. * Add infinity_chibios * Add keymap_hasu.c * Infinity_chibios: select correct bootloader_jump. * Infinity_chibios: improve comments. * Add generic STM32F103C8T6 example. * Add maple mini code. * STM32F103x fixes. * Add maple mini pinout pic. * Chibios: updates for 3.0.4 git. * Chibios: rename example stm32_onekey -> stm32_f072_onekey. * Chibios: add makefiles for Teensy 3.x examples. * Chibios: update Teensy 3.x instructions. * Chibios: Tsy LC is cortex-m0plus. * Chibios: add more guards for transmitting (fix a deadlock bug). * Change README for chibios * Chibios: update examples to current chibios git. Match the changes in mainline chibios: - update chconf.h - update supplied ld scripts structure - update Teensy instructions (switch to official chibios and introduce contrib) * Add ChibiOS and ChibiOS-Contrib submodules Also fix the makefile path for them. * Moves chibios keyboards to keyboards folder * First version of ChibiOS compilation Only the stm32_f072_onkey keyboard is ported at the moment. It compiles, but still doesn't link. * More chibios fixes It now compiles without warnings and links * Move the teensy_lc_onekey to the keyboards folder * Clean up the make file rule structure * Remove keymap_fn_to_action * Update more ChibiOS keyboards to QMK Most of them does not compile at the moment though. * Use older version of Chibios libraries The newest ones have problems with compilation * Remove USB_UNCONFIGURED event It isn't present in the older version of ChibiOS * Fix the infinity_chibios compilation * Fix potentially uninitialized variable * Add missing include * Fix the ChibiOS makefile * Fix some Chibios keyboard compilation * Revert the rules.mk file back to master version * Combine the chibios and AVR makefiles With just the required overrides in the respective platform specific one. * Slight makefile restrucuring Platform specific compiler options * Move avr specific targets out of the main rules * Fix ChibiOS objcopy The ChibiOS objcopy needs different parameters, so the parameters are moved to the corresponding platform rule file * Fix the objcopy for real this time The comands were moved around, so chibios used avr and the ohter way around. Also change the objsize output format * Fix the thumb flags * Fix the infinity hasu keymap * Per platform cpp flags * Add gcc-arm-none-eabi package to travis * Add arm-none-eabi-newlib to travis * Fix the name of the libnewlib-arm-none-eabi lib * Fix the ChibiOS paths So that they are properly relative, and builds don't generate extra folders * Fix the board path of stm32_f103_onekey * Only consider folders with Makefiles as subproject |
9 years ago |
Jack Humbert
|
ba6fb23f07 |
adds handwire and onekey example
|
9 years ago |
|
Jack Humbert
|
649b33d778 |
Renames keyboard folder to keyboards, adds couple of tmk's fixes (#432)
* fixes from tmk's repo * rename keyboard to keyboards |
9 years ago |
|
Jack Humbert
|
de57799530 |
brings alps64 up-to-date (needs testing)
|
9 years ago |
tmk
|
507ebb34f5 |
alps64: Change keymaps and USB descriptors.
|
10 years ago |
|
tmk
|
d5ac54449a |
Add alps64
|
10 years ago |
tmk
|
2721022078 |
Add mechanical locking switch support for NumLock and ScrollLock
|
12 years ago |
|
tmk
|
10f33a3e48 |
Remove ACT_KEYMAP and ACT_OVERLAY
- Remove ACT_OVERLAY - Rename ACT_KEYMAP to ACT_LAYER - Add ACT_LAYER_BITOP |
12 years ago |
|
tmk
|
353a9b56e6 |
Fix BOOTLOADER_SIZE setting
|
12 years ago |
|
tmk
|
b2a19328ad |
Changed Makefile and config.h for new options
|
12 years ago |
|
tmk
|
9a3edb897a |
Fix Makefile and config.h of gh60 for new options
|
12 years ago |
|
tmk
|
dbcac865b9 |
Add NO_ACTION_KEYMAP config option
|
12 years ago |
|
tmk
|
ecb7550a91 |
Add NO_ACTION_FUNCTION config option
|
12 years ago |
|
tmk
|
9757f960f9 |
Add NO_ACTION_TAPPING and NO_ACTION_MACRO config options
|
12 years ago |
|
tmk
|
b057511f45 |
Add NO_ACTION_OVERLAY config option
|
12 years ago |
|
tmk
|
9a106537f6 |
Add NO_PRINT and NO_DEBUG config options.
- NO_PRINT: disable print.h API(also disable debug.h) - NO_DEBUG: disable debug.h API |
12 years ago |
|
tmk
|
c4ab832be0 |
Fix Locking CapsLock support in ADB converter
|
12 years ago |
|
tmk
|
92b92dd78f |
Add mechanical locking switch support for CapsLock
|
12 years ago |
|
tmk
|
1d5bbb55f2 |
Fix legacy keymap support
- need to define USE_LEGACY_KEYMAP to use legacy keymap |
12 years ago |
|
tmk
|
51050875b7 |
Add BOOTLOADER_SIZE and remove BOOT_SIZE
- define BOOTLOADER_SIZE in config.h instead of Makefile |
12 years ago |
|
tmk
|
359b68d35f |
Add eeconfig.c - eeprom stored paramerters
|
12 years ago |
|
tmk
|
abf0b04d14 |
Apply new keymap for gh60
|
12 years ago |
|
tmk
|
b60f9c6ac6 |
Boot Magic key for gh60
|
12 years ago |
|
tmk
|
c009f4643c |
Added Initial files for gh60.
|
13 years ago |
|
tmk
|
3f47bcbcae |
Fix target name and product id of pahntom.
|
13 years ago |
|
tmk
|
613fdb24fc |
Add initial files for Phantom from Tranquilite@GH.
|
13 years ago |
|
tmk
|
ce4857e021 |
Fix and keymap of hid_liber from alaricljs at geekhack.org.
|
13 years ago |
|
tmk
|
1a4ae0fc36 |
Fix copyright and license notices.
|
13 years ago |
|
tmk
|
878daae9c3 |
Rename to hid_liber.
|
13 years ago |
|
tmk
|
c5057c28b1 |
Add initial files for hid_libre.
|
13 years ago |
|
tmk
|
ce2e06c394 |
Fix projects for new keycodes
|
13 years ago |