Tag:
Branch:
Tree:
json_custom_keycodes
arm-dac-work
audio_out
b6_b7_audio
better_chibios_wait
changelog
clockworkpi
develop
edez2
eeprom_update
encoder_matrix
fix/get_report
fix/just_return_false
fix_template_bootmagic
gb_port
gc_switch
gh-pages
hailey_branch
json_audio
json_custom_keycodes
keyboard_overrides
keymap_folders
kle2json_hyper
led_matrix_direct
list_maintainers
make_cli_parsing
master
muon_light
muon_light_dc
olkb_vendor_folder
peasy
peb
pjrc_hid
planck-ez-a5-high
planck_ez_wdg
planck_ez_with_5372
planck_light_rev2
planck_thk
pre-develop-merge-nov20
python_optimizations
qmk_compile_build_keyboard
qmk_compile_improvements
qwiic_hub
qwiic_hud
qwiic_joystiic
refactor_process_record_kb_user
rgb7seg
subatomic
subatomic_encoders
subvendor_ids
titmlb
unorthodox
xap
xmega_support
zvecr-patch-1
0.10.0
0.10.1
0.10.10
0.10.11
0.10.12
0.10.13
0.10.14
0.10.15
0.10.16
0.10.17
0.10.18
0.10.19
0.10.2
0.10.20
0.10.21
0.10.22
0.10.23
0.10.24
0.10.25
0.10.26
0.10.27
0.10.28
0.10.29
0.10.3
0.10.30
0.10.31
0.10.32
0.10.33
0.10.34
0.10.35
0.10.36
0.10.37
0.10.38
0.10.39
0.10.4
0.10.40
0.10.41
0.10.42
0.10.43
0.10.44
0.10.45
0.10.46
0.10.47
0.10.48
0.10.49
0.10.5
0.10.50
0.10.51
0.10.52
0.10.53
0.10.54
0.10.6
0.10.7
0.10.8
0.10.9
0.11.0
0.11.1
0.11.10
0.11.11
0.11.12
0.11.13
0.11.14
0.11.15
0.11.16
0.11.17
0.11.18
0.11.19
0.11.2
0.11.20
0.11.21
0.11.22
0.11.23
0.11.24
0.11.25
0.11.26
0.11.27
0.11.28
0.11.29
0.11.3
0.11.30
0.11.31
0.11.32
0.11.33
0.11.34
0.11.35
0.11.36
0.11.37
0.11.38
0.11.39
0.11.4
0.11.40
0.11.41
0.11.42
0.11.43
0.11.44
0.11.45
0.11.46
0.11.47
0.11.48
0.11.49
0.11.5
0.11.50
0.11.51
0.11.52
0.11.53
0.11.54
0.11.55
0.11.56
0.11.57
0.11.58
0.11.59
0.11.6
0.11.60
0.11.61
0.11.62
0.11.63
0.11.64
0.11.65
0.11.66
0.11.67
0.11.68
0.11.69
0.11.7
0.11.70
0.11.8
0.11.9
0.12.0
0.12.1
0.12.10
0.12.11
0.12.12
0.12.13
0.12.14
0.12.15
0.12.16
0.12.17
0.12.18
0.12.19
0.12.2
0.12.20
0.12.21
0.12.22
0.12.23
0.12.24
0.12.25
0.12.26
0.12.27
0.12.28
0.12.29
0.12.3
0.12.30
0.12.31
0.12.32
0.12.33
0.12.34
0.12.35
0.12.36
0.12.37
0.12.38
0.12.39
0.12.4
0.12.40
0.12.41
0.12.42
0.12.43
0.12.44
0.12.45
0.12.46
0.12.47
0.12.48
0.12.49
0.12.5
0.12.50
0.12.51
0.12.52
0.12.6
0.12.7
0.12.8
0.12.9
0.13.0
0.13.1
0.13.10
0.13.11
0.13.12
0.13.13
0.13.14
0.13.15
0.13.16
0.13.17
0.13.18
0.13.19
0.13.2
0.13.20
0.13.21
0.13.22
0.13.23
0.13.24
0.13.25
0.13.26
0.13.27
0.13.28
0.13.29
0.13.3
0.13.30
0.13.31
0.13.32
0.13.33
0.13.34
0.13.35
0.13.36
0.13.37
0.13.38
0.13.4
0.13.5
0.13.6
0.13.7
0.13.8
0.13.9
0.14.0
0.14.1
0.14.10
0.14.11
0.14.12
0.14.13
0.14.14
0.14.15
0.14.16
0.14.17
0.14.18
0.14.19
0.14.2
0.14.20
0.14.21
0.14.22
0.14.23
0.14.24
0.14.25
0.14.26
0.14.27
0.14.28
0.14.29
0.14.3
0.14.30
0.14.31
0.14.32
0.14.33
0.14.4
0.14.5
0.14.6
0.14.7
0.14.8
0.14.9
0.15.0
0.15.1
0.15.10
0.15.11
0.15.12
0.15.13
0.15.14
0.15.15
0.15.16
0.15.17
0.15.18
0.15.19
0.15.2
0.15.20
0.15.21
0.15.22
0.15.23
0.15.24
0.15.25
0.15.3
0.15.4
0.15.5
0.15.6
0.15.7
0.15.8
0.15.9
0.16.0
0.16.1
0.16.2
0.16.3
0.16.4
0.16.5
0.16.6
0.16.7
0.16.8
0.16.9
0.17.0
0.17.1
0.17.2
0.17.3
0.17.4
0.17.5
0.5.0
0.5.1
0.5.10
0.5.100
0.5.101
0.5.102
0.5.103
0.5.104
0.5.105
0.5.106
0.5.107
0.5.108
0.5.109
0.5.11
0.5.110
0.5.111
0.5.112
0.5.113
0.5.114
0.5.115
0.5.116
0.5.117
0.5.118
0.5.119
0.5.12
0.5.120
0.5.121
0.5.122
0.5.123
0.5.124
0.5.125
0.5.126
0.5.127
0.5.128
0.5.129
0.5.13
0.5.130
0.5.131
0.5.132
0.5.133
0.5.134
0.5.135
0.5.136
0.5.137
0.5.138
0.5.139
0.5.14
0.5.140
0.5.141
0.5.142
0.5.143
0.5.144
0.5.145
0.5.146
0.5.147
0.5.148
0.5.149
0.5.15
0.5.150
0.5.151
0.5.152
0.5.153
0.5.154
0.5.155
0.5.156
0.5.157
0.5.158
0.5.159
0.5.16
0.5.160
0.5.161
0.5.162
0.5.163
0.5.164
0.5.165
0.5.166
0.5.167
0.5.168
0.5.169
0.5.17
0.5.170
0.5.171
0.5.172
0.5.173
0.5.174
0.5.175
0.5.176
0.5.177
0.5.178
0.5.179
0.5.180
0.5.181
0.5.182
0.5.183
0.5.184
0.5.185
0.5.186
0.5.187
0.5.188
0.5.189
0.5.190
0.5.191
0.5.192
0.5.193
0.5.194
0.5.195
0.5.196
0.5.197
0.5.198
0.5.199
0.5.2
0.5.20
0.5.200
0.5.201
0.5.202
0.5.203
0.5.204
0.5.205
0.5.206
0.5.207
0.5.208
0.5.209
0.5.21
0.5.210
0.5.211
0.5.212
0.5.213
0.5.214
0.5.215
0.5.216
0.5.217
0.5.218
0.5.219
0.5.22
0.5.220
0.5.221
0.5.222
0.5.223
0.5.224
0.5.225
0.5.226
0.5.227
0.5.228
0.5.229
0.5.23
0.5.230
0.5.231
0.5.232
0.5.233
0.5.234
0.5.235
0.5.236
0.5.237
0.5.238
0.5.239
0.5.24
0.5.240
0.5.241
0.5.242
0.5.243
0.5.244
0.5.245
0.5.246
0.5.247
0.5.248
0.5.249
0.5.25
0.5.250
0.5.251
0.5.252
0.5.253
0.5.254
0.5.255
0.5.256
0.5.257
0.5.258
0.5.259
0.5.26
0.5.260
0.5.261
0.5.262
0.5.263
0.5.264
0.5.27
0.5.28
0.5.29
0.5.3
0.5.30
0.5.31
0.5.32
0.5.33
0.5.34
0.5.35
0.5.36
0.5.37
0.5.38
0.5.39
0.5.4
0.5.40
0.5.41
0.5.42
0.5.43
0.5.44
0.5.45
0.5.46
0.5.47
0.5.48
0.5.49
0.5.5
0.5.50
0.5.51
0.5.52
0.5.53
0.5.54
0.5.55
0.5.56
0.5.57
0.5.58
0.5.59
0.5.6
0.5.60
0.5.61
0.5.62
0.5.63
0.5.64
0.5.65
0.5.66
0.5.67
0.5.68
0.5.69
0.5.7
0.5.70
0.5.71
0.5.72
0.5.73
0.5.74
0.5.75
0.5.76
0.5.77
0.5.78
0.5.79
0.5.8
0.5.80
0.5.81
0.5.82
0.5.83
0.5.84
0.5.85
0.5.86
0.5.87
0.5.88
0.5.89
0.5.9
0.5.90
0.5.91
0.5.92
0.5.93
0.5.94
0.5.95
0.5.96
0.5.97
0.5.98
0.5.99
0.6.0
0.6.1
0.6.10
0.6.100
0.6.101
0.6.102
0.6.103
0.6.104
0.6.105
0.6.106
0.6.107
0.6.108
0.6.109
0.6.11
0.6.110
0.6.111
0.6.112
0.6.113
0.6.114
0.6.115
0.6.116
0.6.117
0.6.118
0.6.119
0.6.12
0.6.120
0.6.121
0.6.122
0.6.123
0.6.124
0.6.125
0.6.126
0.6.127
0.6.128
0.6.129
0.6.13
0.6.130
0.6.131
0.6.132
0.6.133
0.6.134
0.6.135
0.6.136
0.6.137
0.6.138
0.6.139
0.6.14
0.6.140
0.6.141
0.6.142
0.6.143
0.6.144
0.6.145
0.6.146
0.6.147
0.6.148
0.6.149
0.6.15
0.6.150
0.6.151
0.6.152
0.6.153
0.6.154
0.6.155
0.6.156
0.6.157
0.6.158
0.6.159
0.6.16
0.6.160
0.6.161
0.6.162
0.6.163
0.6.164
0.6.165
0.6.166
0.6.167
0.6.168
0.6.169
0.6.17
0.6.170
0.6.171
0.6.172
0.6.173
0.6.174
0.6.175
0.6.176
0.6.177
0.6.178
0.6.179
0.6.18
0.6.180
0.6.181
0.6.182
0.6.183
0.6.184
0.6.185
0.6.186
0.6.187
0.6.188
0.6.189
0.6.19
0.6.190
0.6.191
0.6.192
0.6.193
0.6.194
0.6.195
0.6.196
0.6.197
0.6.198
0.6.199
0.6.2
0.6.20
0.6.200
0.6.201
0.6.202
0.6.203
0.6.204
0.6.205
0.6.206
0.6.207
0.6.208
0.6.209
0.6.21
0.6.210
0.6.211
0.6.212
0.6.213
0.6.214
0.6.215
0.6.216
0.6.217
0.6.218
0.6.219
0.6.22
0.6.220
0.6.221
0.6.222
0.6.223
0.6.224
0.6.225
0.6.226
0.6.227
0.6.228
0.6.229
0.6.23
0.6.230
0.6.231
0.6.232
0.6.233
0.6.234
0.6.235
0.6.236
0.6.237
0.6.238
0.6.239
0.6.24
0.6.240
0.6.241
0.6.242
0.6.243
0.6.244
0.6.245
0.6.246
0.6.247
0.6.248
0.6.249
0.6.25
0.6.250
0.6.251
0.6.252
0.6.253
0.6.254
0.6.255
0.6.256
0.6.257
0.6.258
0.6.259
0.6.26
0.6.260
0.6.261
0.6.262
0.6.263
0.6.264
0.6.265
0.6.266
0.6.267
0.6.268
0.6.269
0.6.27
0.6.270
0.6.271
0.6.272
0.6.273
0.6.274
0.6.275
0.6.276
0.6.277
0.6.278
0.6.279
0.6.28
0.6.280
0.6.281
0.6.282
0.6.283
0.6.284
0.6.285
0.6.286
0.6.287
0.6.288
0.6.289
0.6.29
0.6.290
0.6.291
0.6.292
0.6.293
0.6.294
0.6.295
0.6.296
0.6.297
0.6.298
0.6.299
0.6.3
0.6.30
0.6.300
0.6.301
0.6.302
0.6.303
0.6.304
0.6.305
0.6.306
0.6.307
0.6.308
0.6.309
0.6.31
0.6.310
0.6.311
0.6.312
0.6.313
0.6.314
0.6.315
0.6.316
0.6.317
0.6.318
0.6.319
0.6.32
0.6.320
0.6.321
0.6.322
0.6.323
0.6.324
0.6.325
0.6.326
0.6.327
0.6.328
0.6.329
0.6.33
0.6.330
0.6.331
0.6.332
0.6.333
0.6.334
0.6.335
0.6.336
0.6.337
0.6.338
0.6.339
0.6.34
0.6.340
0.6.341
0.6.342
0.6.343
0.6.344
0.6.345
0.6.346
0.6.347
0.6.348
0.6.349
0.6.35
0.6.350
0.6.351
0.6.352
0.6.353
0.6.354
0.6.355
0.6.356
0.6.357
0.6.358
0.6.359
0.6.36
0.6.360
0.6.361
0.6.362
0.6.363
0.6.364
0.6.365
0.6.366
0.6.367
0.6.368
0.6.369
0.6.37
0.6.370
0.6.371
0.6.372
0.6.373
0.6.374
0.6.375
0.6.376
0.6.377
0.6.378
0.6.379
0.6.38
0.6.380
0.6.381
0.6.382
0.6.383
0.6.384
0.6.385
0.6.386
0.6.387
0.6.388
0.6.389
0.6.39
0.6.390
0.6.391
0.6.392
0.6.393
0.6.394
0.6.395
0.6.396
0.6.397
0.6.398
0.6.399
0.6.4
0.6.40
0.6.400
0.6.401
0.6.402
0.6.403
0.6.404
0.6.405
0.6.406
0.6.407
0.6.408
0.6.409
0.6.41
0.6.410
0.6.411
0.6.412
0.6.413
0.6.414
0.6.415
0.6.416
0.6.417
0.6.418
0.6.419
0.6.42
0.6.420
0.6.421
0.6.422
0.6.423
0.6.424
0.6.425
0.6.426
0.6.427
0.6.428
0.6.429
0.6.43
0.6.430
0.6.431
0.6.432
0.6.433
0.6.434
0.6.435
0.6.436
0.6.437
0.6.438
0.6.439
0.6.44
0.6.440
0.6.441
0.6.442
0.6.443
0.6.444
0.6.445
0.6.446
0.6.447
0.6.448
0.6.449
0.6.45
0.6.450
0.6.451
0.6.452
0.6.453
0.6.454
0.6.455
0.6.456
0.6.457
0.6.458
0.6.459
0.6.46
0.6.460
0.6.461
0.6.462
0.6.463
0.6.464
0.6.47
0.6.48
0.6.49
0.6.5
0.6.50
0.6.51
0.6.52
0.6.53
0.6.54
0.6.55
0.6.56
0.6.57
0.6.58
0.6.59
0.6.6
0.6.60
0.6.61
0.6.62
0.6.63
0.6.64
0.6.65
0.6.66
0.6.67
0.6.68
0.6.69
0.6.7
0.6.70
0.6.71
0.6.72
0.6.73
0.6.74
0.6.75
0.6.76
0.6.77
0.6.78
0.6.79
0.6.8
0.6.80
0.6.81
0.6.82
0.6.83
0.6.84
0.6.85
0.6.86
0.6.87
0.6.88
0.6.89
0.6.9
0.6.90
0.6.91
0.6.92
0.6.93
0.6.94
0.6.95
0.6.96
0.6.97
0.6.98
0.6.99
0.7.0
0.7.1
0.7.10
0.7.100
0.7.101
0.7.102
0.7.103
0.7.104
0.7.105
0.7.106
0.7.107
0.7.108
0.7.109
0.7.11
0.7.110
0.7.111
0.7.112
0.7.113
0.7.114
0.7.115
0.7.116
0.7.117
0.7.118
0.7.119
0.7.12
0.7.120
0.7.121
0.7.122
0.7.123
0.7.124
0.7.125
0.7.126
0.7.127
0.7.128
0.7.129
0.7.13
0.7.130
0.7.131
0.7.132
0.7.133
0.7.134
0.7.135
0.7.136
0.7.137
0.7.138
0.7.139
0.7.14
0.7.140
0.7.141
0.7.142
0.7.143
0.7.144
0.7.145
0.7.146
0.7.147
0.7.148
0.7.149
0.7.15
0.7.150
0.7.151
0.7.152
0.7.153
0.7.154
0.7.155
0.7.156
0.7.157
0.7.158
0.7.159
0.7.16
0.7.160
0.7.161
0.7.162
0.7.163
0.7.164
0.7.165
0.7.166
0.7.167
0.7.168
0.7.169
0.7.17
0.7.170
0.7.171
0.7.172
0.7.18
0.7.19
0.7.2
0.7.20
0.7.21
0.7.22
0.7.23
0.7.24
0.7.25
0.7.26
0.7.27
0.7.28
0.7.29
0.7.3
0.7.30
0.7.31
0.7.32
0.7.33
0.7.34
0.7.35
0.7.36
0.7.37
0.7.38
0.7.39
0.7.4
0.7.40
0.7.41
0.7.42
0.7.43
0.7.44
0.7.45
0.7.46
0.7.47
0.7.48
0.7.49
0.7.5
0.7.50
0.7.51
0.7.52
0.7.53
0.7.54
0.7.55
0.7.56
0.7.57
0.7.58
0.7.59
0.7.6
0.7.60
0.7.61
0.7.62
0.7.63
0.7.64
0.7.65
0.7.66
0.7.67
0.7.68
0.7.69
0.7.7
0.7.70
0.7.71
0.7.72
0.7.73
0.7.74
0.7.75
0.7.76
0.7.77
0.7.78
0.7.79
0.7.8
0.7.80
0.7.81
0.7.82
0.7.83
0.7.84
0.7.85
0.7.86
0.7.87
0.7.88
0.7.89
0.7.9
0.7.90
0.7.91
0.7.92
0.7.93
0.7.94
0.7.95
0.7.96
0.7.97
0.7.98
0.7.99
0.8.0
0.8.1
0.8.10
0.8.100
0.8.101
0.8.102
0.8.103
0.8.104
0.8.105
0.8.106
0.8.107
0.8.108
0.8.109
0.8.11
0.8.110
0.8.111
0.8.112
0.8.113
0.8.114
0.8.115
0.8.116
0.8.117
0.8.118
0.8.119
0.8.12
0.8.120
0.8.121
0.8.122
0.8.123
0.8.124
0.8.125
0.8.126
0.8.127
0.8.128
0.8.129
0.8.13
0.8.130
0.8.131
0.8.132
0.8.133
0.8.134
0.8.135
0.8.136
0.8.137
0.8.138
0.8.139
0.8.14
0.8.140
0.8.141
0.8.142
0.8.143
0.8.144
0.8.145
0.8.146
0.8.147
0.8.148
0.8.149
0.8.15
0.8.150
0.8.151
0.8.152
0.8.153
0.8.154
0.8.155
0.8.156
0.8.157
0.8.158
0.8.159
0.8.16
0.8.160
0.8.161
0.8.162
0.8.163
0.8.164
0.8.165
0.8.166
0.8.167
0.8.168
0.8.169
0.8.17
0.8.170
0.8.171
0.8.172
0.8.173
0.8.174
0.8.175
0.8.176
0.8.177
0.8.178
0.8.179
0.8.18
0.8.180
0.8.181
0.8.182
0.8.183
0.8.184
0.8.185
0.8.186
0.8.187
0.8.188
0.8.189
0.8.19
0.8.190
0.8.191
0.8.192
0.8.2
0.8.20
0.8.21
0.8.22
0.8.23
0.8.24
0.8.25
0.8.26
0.8.27
0.8.28
0.8.29
0.8.3
0.8.30
0.8.31
0.8.32
0.8.33
0.8.34
0.8.35
0.8.36
0.8.37
0.8.38
0.8.39
0.8.4
0.8.40
0.8.41
0.8.42
0.8.43
0.8.44
0.8.45
0.8.46
0.8.47
0.8.48
0.8.49
0.8.5
0.8.50
0.8.51
0.8.52
0.8.53
0.8.54
0.8.55
0.8.56
0.8.57
0.8.58
0.8.59
0.8.6
0.8.60
0.8.61
0.8.62
0.8.63
0.8.64
0.8.65
0.8.66
0.8.67
0.8.68
0.8.69
0.8.7
0.8.70
0.8.71
0.8.72
0.8.73
0.8.74
0.8.75
0.8.76
0.8.77
0.8.78
0.8.79
0.8.8
0.8.80
0.8.81
0.8.82
0.8.83
0.8.84
0.8.85
0.8.86
0.8.87
0.8.88
0.8.89
0.8.9
0.8.90
0.8.91
0.8.92
0.8.93
0.8.94
0.8.95
0.8.96
0.8.97
0.8.98
0.8.99
0.9.0
0.9.1
0.9.10
0.9.11
0.9.12
0.9.13
0.9.14
0.9.15
0.9.16
0.9.17
0.9.18
0.9.19
0.9.2
0.9.20
0.9.21
0.9.22
0.9.23
0.9.24
0.9.25
0.9.26
0.9.27
0.9.28
0.9.29
0.9.3
0.9.30
0.9.31
0.9.32
0.9.33
0.9.34
0.9.35
0.9.36
0.9.37
0.9.38
0.9.39
0.9.4
0.9.40
0.9.41
0.9.42
0.9.43
0.9.44
0.9.45
0.9.46
0.9.47
0.9.48
0.9.49
0.9.5
0.9.50
0.9.51
0.9.52
0.9.53
0.9.54
0.9.55
0.9.56
0.9.57
0.9.58
0.9.59
0.9.6
0.9.7
0.9.8
0.9.9
LUFA-111009
LUFA-130901
LUFA-130901-BETA
LUFA-140302
LUFA-140928
LUFA-151115
LUFA-170418
breakpoint_2019_08_30
breakpoint_2019_11_30
breakpoint_2020_02_29
breakpoint_2021_05_29
breakpoint_2021_08_28
breakpoint_2021_11_27
breakpoint_2022_05_28
drop-1.0.0
ergodox_ez-161205
gh60-0.1
planck-4.0
planck-4.1
planck-4.2
planck-5.0
planck-6.0
planck-6.1
planck-light-1.0
preonic-1.0
preonic-2.0
v4.0
${ noResults }
48 Commits (json_custom_keycodes)
| Author | SHA1 | Message | Date |
|---|---|---|---|
Ryan
|
fe6d6cf76d
|
Remove empty override functions (#14312)
* Remove empty override functions, 0-9 * Remove empty override functions, A-D * Remove empty override functions, E-H * Remove empty override functions, handwired * Remove empty override functions, I-L * Remove empty override functions, M-P * Remove empty override functions, Q-T * Remove empty override functions, U-Z |
4 years ago |
|
Ryan
|
41c50bb653
|
Change keyboard level include guards to `pragma once` (#14248)
* Change keyboard level include guards to `pragma once` And clean up a lot of layout macros * Oops * Remove dangling endif |
4 years ago |
James Young
|
4b453dca92
|
Remove MIDI Configuration boilerplate (#11151)
* remove keyboard-level instances of `MIDI_ENABLE = no`
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e '/^[ #]*MIDI_ENABLE[ \t]*=[ \t]*no/d' {} +
```
Co-Authored-By: Nick Brassel <nick@tzarc.org>
* fix case-sensitivity issues on MIDI_ENABLE
Change instances of `MIDI_ENABLE = YES` to `MIDI_ENABLE = yes`.
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;MIDI_ENABLE[ \t]*=[ \t]*[Yy][Ee][Ss];MIDI_ENABLE = yes;g' {} +
```
* replace `# MIDI controls` with `# MIDI support`
Replace `# MIDI controls` with `# MIDI support` in keyboard-level `rules.mk` files.
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*MIDI[ \t]*\(controls\|support\).*;# MIDI support;g' {} +
```
* align inline comments
Aligns the inline comments to the length used by the QMK AVR rules.mk template.
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;MIDI_ENABLE *= *yes.*;MIDI_ENABLE = yes # MIDI support;g' {} +
```
* remove commented instances of `MIDI_ENABLE` from keyboard `rules.mk` files
Commands:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#\([ \t]*MIDI_ENABLE\) = yes; \1 = no ;' {} +
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;^\([ \t]*\)\(MIDI_ENABLE = no\);\2\1;' {} +
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e '/^[ #]\+MIDI_ENABLE *= *no/d' {} +
```
* remove MIDI configuration boilerplate from keyboard config.h files
Co-authored-by: Nick Brassel <nick@tzarc.org>
|
4 years ago |
|
James Young
|
a03aa301de
|
Remove Full Bootmagic (#13846)
* disambiguate Bootmagic rules in keymaps
The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic.
This commit edits the files to specify that full Bootmagic is intended.
* remove BOOTMAGIC_ENABLE=full setting
* unify commented BOOTMAGIC_ENABLE rules in keyboards
Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out.
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).*;\1 = no # Virtual DIP switch configuration;g' {} +
```
* remove commented Bootmagic rules from keymap/user level
Command:
```
find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*/d' {} +
```
* update keyboard BOOTMAGIC_ENABLE rule formatting
Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later).
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
```
* update keyboards' BOOTMAGIC_ENABLE settings
Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' +
```
* update keymap/user BOOTMAGIC_ENABLE settings
Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.
Commands:
```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
```
* remove and replace inline comments in keyboards and keymap/user files
Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`.
Commands:
```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1 # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1 # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1 # Enable Bootmagic Lite;g' '{}' +
```
* rename improperly named makefiles
Some files intended to be used as makefiles had improper names causing them to not be used as intended when building.
This commit corrects the filenames of the affected files.
* update renamed file with new rule formatting
* update QMK's template files
Updates QMK's `rules.mk` templates to use the new inline comment.
* update QMK Docs
- remove documentation of full Bootmagic
- update links to Bootmagic Lite doc
- add doc for Magic Keycodes
* rules.mk patch for coarse/ixora and coarse/vinta
|
4 years ago |
|
Ryan
|
50d4dfd2e6
|
`keymap_extras`: Remove deprecated defines (#12949)
|
4 years ago |
|
James Young
|
1646c0f26c
|
2021 May 29 Breaking Changes Update (#13034)
* Add Per Key functionality for AutoShift (#11536) * LED Matrix: Reactive effect buffers & advanced indicators (#12588) * [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626) * [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625) * LED Matrix: Split (#12633) * [CI] Format code according to conventions (#12650) * feat: infinite timeout for leader key (#6580) * feat: implement leader_no_timeout logic * docs(leader_key): infinite leader timeout docs * Format code according to conventions (#12680) * Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403) * Fix default ADC_RESOLUTION for ADCv3 (and ADCv4) Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers (that macro should not have been there, because ADCv3 has CFGR instead of CFGR1). Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS if it is defined (that name is used for ADCv3 and ADCv4). * Update ADC docs to match the actually used resolution ADC driver for ChibiOS actually uses the 10-bit resolution by default (probably to match AVR); fix the documentation accordingly. Also add both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names differ according to the ADC implementation in the particular MCU). * Fix pinToMux() for B12 and B13 on STM32F3xx Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and B13 pins were wrong. * Add support for all possible analog pins on STM32F1xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx (they are the same at least for STM32F103x8 and larger F103 devices, and also F102, F105, F107 families). Actually tested on STM32F103C8T6 (therefore pins C0...C5 were not tested). Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages, cannot be supported at the moment, because those pins are connected only to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1. * Add support for all possible analog pins on STM32F4xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally F3...F10 (if STM32_ADC_USE_ADC3 is enabled). These mux values are apparently the same for all F4xx devices, except some smaller devices may not have ADC3. Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested. Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices which don't have ADC3 also don't have the GPIOF port, therefore the code which refers to Fx pins does not compile. * Fix STM32F3xx ADC mux table in documentation The ADC driver documentation had some errors in the mux table for STM32F3xx. Fix this table to match the datasheet and the actual code (mux settings for B12 and B13 were also tested on a real STM32F303CCT6 chip). * Add STM32F1xx ADC pins to the documentation * Add STM32F4xx ADC pins to the documentation * Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600) * Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example. * Update flashing.md * Update chconf.h * Update config.h * Update halconf.h * Update mcuconf.h * eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671) * Add support for MCU = STM32F446 (#12619) * Add support for MCU = STM32F446 * Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h * Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64 * stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled. * Format code according to conventions (#12682) * Format code according to conventions (#12687) * Add STM32L433 and L443 support (#12063) * initial L433 commit * change to XC * fix L433 * disable all peripherals * update system and peripheral clocks * 433 change * use its own board files * revert its own board files * l433 specific change * fix stm32l432xx define * remove duplicate #define * fix bootloader jump * move to L443xx and add i2c2, spi2, usart3 to mcuconf.h * move to L443 * move to L443 * fix sdmmc in mcuconf.h * include STM32L443 * add L443 * Include L443 in compatible microcontrollers * Include L443 in compatible microcontrollers * Update config bootloader jump description * Update ChibiOS define reasoning * Update quantum/mcu_selection.mk * fix git conflict * Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613) * Fix bad PR merge for #6580. (#12721) * Change RGB/LED Matrix to use a simple define for USB suspend (#12697) * [CI] Format code according to conventions (#12731) * Fixing transport's led/rgb matrix suspend state logic (#12770) * [CI] Format code according to conventions (#12772) * Fix comment parsing (#12750) * Added OLED fade out support (#12086) * fix some references to bin/qmk that slipped in (#12832) * Resolve a number of warnings in `qmk generate-api` (#12833) * New command: qmk console (#12828) * stash poc * stash * tidy up implementation * Tidy up slightly for review * Tidy up slightly for review * Bodge environment to make tests pass * Refactor away from asyncio due to windows issues * Filter devices * align vid/pid printing * Add hidapi to the installers * start preparing for multiple hid_listeners * udev rules for hid_listen * refactor to move closer to end state * very basic implementation of the threaded model * refactor how vid/pid/index are supplied and parsed * windows improvements * read the report directly when usage page isn't available * add per-device colors, the choice to show names or numbers, and refactor * add timestamps * Add support for showing bootloaders * tweak the color for bootloaders * Align bootloader disconnect with connect color * add support for showing all bootloaders * fix the pyusb check * tweaks * fix exception * hide a stack trace behind -v * add --no-bootloaders option * add documentation for qmk console * Apply suggestions from code review * pyformat * clean up and flesh out KNOWN_BOOTLOADERS * Remove pointless SERIAL_LINK_ENABLE rules (#12846) * Make Swap Hands use PROGMEM (#12284) This converts the array that the Swap Hands feature uses to use PROGMEM, and to read from that array, as such. Since this array never changes at runtime, there is no reason to keep it in memory. Especially for AVR boards, as memory is a precious resource. * Fix another bin/qmk reference (#12856) * [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419) * Fixup build errors on `develop` branch. (#12723) * LED Matrix: Effects! (#12651) * Fix syntax error when compiling for ARM (#12866) * Remove KEYMAP and LAYOUT_kc (#12160) * alias KEYMAP to LAYOUT * remove KEYMAP and LAYOUT_kc * Add setup, clone, and env to the list of commands we allow even with broken modules (#12868) * Rename `point_t` -> `led_point_t` (#12864) * [Keyboard] updated a vendor name / fixed minor keymap issues (#12881) * Add missing LED Matrix suspend code to suspend.c (#12878) * LED Matrix: Documentation (#12685) * Deprecate `send_unicode_hex_string()` (#12602) * Fix spelling mistake regarding LED Matrix in split_common. (#12888) * [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895) * Use milc.subcommand.config instead of qmk.cli.config (#12915) * Use milc.subcommand.config instead * pyformat * remove the config test * Add function to allow repeated blinking of one layer (#12237) * Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time * Update doc * Rework rgblight blinking according to requested change * optimize storage * Fixup housekeeping from being invoked twice per loop. (#12933) * matrix: wait for row signal to go HIGH for every row (#12945) I noticed this discrepancy (last row of the matrix treated differently than the others) when optimizing the input latency of my keyboard controller, see also https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/ Before this commit, when tuning the delays I noticed ghost key presses when pressing the F2 key, which is on the last row of the keyboard matrix: the dead_grave key, which is on the first row of the keyboard matrix, would be incorrectly detected as pressed. After this commit, all keyboard matrix rows are interpreted correctly. I suspect that my setup is more susceptible to this nuance than others because I use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask the problem. * ensure we do not conflict with existing keymap aliases (#12976) * Add support for up to 4 IS31FL3733 drivers (#12342) * Convert Encoder callbacks to be boolean functions (#12805) * [Keyboard] Fix Terrazzo build failure (#12977) * Do not hard set config in CPTC files (#11864) * [Keyboard] Corne - Remove legacy revision support (#12226) * [Keymap] Update to Drashna keymap and user code (based on develop) (#12936) * Add Full-duplex serial driver for ARM boards (#9842) * Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987) * Backlight: add defines for default level and breathing state (#12560) * Add dire message about LUFA mass storage bootloader (#13014) * [Keyboard] Remove redundant legacy and common headers for crkbd (#13023) Was causing compiler errors on some systems. * Fix keyboards/keymaps for boolean encoder callback changes (#12985) * `backlight.c`: include `eeprom.h` (#13024) * Add changelog for 2021-05-29 Breaking Changes merge (#12939) * Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version * Add recent develop changes * Sort recent develop changes * Remove sections for ChibiOS changes per tzarc No ChibiOS changes this round. * Add and sort recent develop changes * add notes about keyboard moves/deletions * import changelog for PR 12172 Documents the change to BOOTMAGIC_ENABLE. * update section headings * re-sort changelog * add additional note regarding Bootmagic changes * remove changelog timestamp * update dates in main Breaking Changes docs * fix broken section anchors in previous changelogs * add link to backlight/eeprom patch to changelog * highlight some more changes * link PRs from section headers * Restore standard readme * run: qmk cformat --core-only |
4 years ago |
Zach White
|
38d8d5445e
|
Remove KEYMAP and LAYOUT_kc (#12160)
* alias KEYMAP to LAYOUT * remove KEYMAP and LAYOUT_kc |
4 years ago |
IFo Hancroft
|
516afb0343
|
[Keymap] My ErgoDash Keymap (#11895)
|
4 years ago |
Drashna Jaelre
|
c80e5f9f88
|
Audio system overhaul (#11820)
* Redo Arm DAC implementation for additive, wavetable synthesis, sample playback changes by Jack Humbert on an implementation for DAC audio on arm/chibios platforms this commits bundles the changes from the arm-dac-work branch focused on audio/audio_arm.* into one commit (leaving out the test-keyboard) |
4 years ago |
Joel Challis
|
a07c2a1377
|
Remove QMK_KEYBOARD_CONFIG_H (#11576)
|
4 years ago |
|
Ryan
|
cc3f2e2865
|
Remove `DESCRIPTION`, E-G (#11574)
|
4 years ago |
|
Zach White
|
6368a5697d
|
Exclude more keyboards from CI (#11436)
* exclude all of handwired * exclude more keyboards from CI |
4 years ago |
|
Zach White
|
c0dcee96a8
|
Initial list of keyboards to exclude from CI (#11213)
|
4 years ago |
Fred Silberberg
|
1aacbc44d1
|
[Keymap] Added 333fred 5x6_5 keymap (#10272)
* First pass at manuform layout. * Updates from actual usage on my board. Fixed a couple of bugs, added a stormlight quote randomizer. * Use a 32-bit timer that can actually hit 5 minutes. * Some updates after a day of usage: * Turn off WPM. It's too inaccurate and takes up a decent amount of space that can be devoted to quotes. * Turn off the OLEDs after 5 minutes * Move the keys around a bit. * Add many more quotes. * Adjust the quotes to make room for missing and misswritten WoT quote. Adjusted the keymap slightly. Adjust the mods display to include one_shots. * Revert osm on lgui as it makes start menu search impossible to use. * Use LTO_ENABLE flag. * License all of my (333fred's) keymaps as MIT. * Update users/333fred/rgb.c Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Ryan <fauxpark@gmail.com> |
5 years ago |
hidenori
|
58d7e9fa0e
|
[Keymap] Added ToyoshimaHidenori's keymap for Ergodash mini (#10228)
* Add ToyoshimaHidenori's keymap * Remove some dead code and characters * Change the folder name from uppercase to lowercase * Remove uppercase folder |
5 years ago |
|
Fred Silberberg
|
2dca087b04
|
Add naked60 layout, clean up my userspace files and rules.mk. (#8848)
|
5 years ago |
Hoàng Vương
|
3b05f25221
|
[Keymap] shadowprogr's personal keymap (#8497)
* Add personal keymap * Add keymap readme.md * Update keymap |
5 years ago |
tw1t611
|
aeab11da88
|
Add tw1t611 ergodash keymap. (#8377)
* Add tw1t611 ergodash keymap. * Fix keycodes. Change kc_rctl to kcb rsft. * Change block to enum layers. * Remove blackslahs. * Remove last slash. Align row. * Use new german keymap. * Fix typo. Co-authored-by: Daniel Schindler <client55@protonmail.com> |
5 years ago |
nopunin10did
|
2fe288d01d
|
[Keymap] Adding ergodash/rev1:nopunin10did (#8098)
* Adding ergodash/rev1:nopunin10did * Update keyboards/ergodash/rev1/keymaps/nopunin10did/keymap.c * Update keyboards/ergodash/rev1/keymaps/nopunin10did/keymap.c * Update keyboards/ergodash/rev1/keymaps/nopunin10did/readme.md |
5 years ago |
ridingqwerty
|
66fe3001e4
|
Trim firmware sizes from default rules.mk, part 1 (#8027)
* Removed reference to firmware size in 0-9,a-f board-level and default keymap 'rules.mk' files * Correct some 'rules.mk' in boards buried under vendor folders * PR8027 patch Co-authored-by: GeorgeKoenig <35542036+GeorgeKoenig@users.noreply.github.com> Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> |
5 years ago |
|
fauxpark
|
eb5d267e63
|
Enforce definition of `DIODE_DIRECTION` for non-custom matrix boards (#7915)
* Enforce definition of `DIODE_DIRECTION` for non-custom matrix boards * Define diode direction for failing boards * Matching parentheses * Put onekey diode directions in top level config |
5 years ago |
Nathan Gray
|
6b17067b15 |
[Keyboard] Fix the order of underglow LEDs on ergodash/rev1 (#7791)
On the v1.2 PCB the slave half leds go in reverse order compared to the master half. With this change, the leds are all in order from left to right, so animations like Knight Rider look like you'd expect. |
5 years ago |
|
Drashna Jaelre
|
e6b9980bd4 |
Remove keymap_config extern from default keymaps (#7399)
* Remove keymap_config extern from default keymaps * Revert unicode Apparently VSCode does not like unicode, I didn't actually edit these lines, so it must have been automatic... :( Co-Authored-By: fauxpark <fauxpark@gmail.com> |
6 years ago |
Yet Another Developer
|
3d53ea439c |
[Keymap] Ergodash keymap for yet-another-developer (#7046)
* Initialize ergodash rev 1 keymap ./util/new_keymap.sh ergodash/rev1 yet-another-developer * Add user space configurations referenced from drashna * Start community layout for ergodash in ortho_5x14 * Remove unused layers * Add userspace layers * Add Userspace gitignore Hide Secrets * Remove userspace unused drashna features * Scrap default keymap and follow drashna's template * Add code referenced from kuchosauronad0 * Make sure that the author is named Developer * Replace middle keys del and bksp with curly brace * Reduce ONESHOT_TIMEOUT from 3sec to 2sec * Remove adjust key AG_SWAP * Disable UNICODEMAP_ENABLE, remove code causing build fail * Increase TAPPING_TERM to 240 Reason: Because Space is also LOWER, space sometimes not registering. PS: I dont want to #define RETRO_TAPPING yet * Update KC_MAKE to use :flash * Remove TAP_ONCE, use tap_code Signed-off-by: Developer <anotherdeveloper@icloud.com> * Remove redundant code implementation of keyboard_post_init_user https://github.com/qmk/qmk_firmware/pull/7046 users/yet-another-developer/leader.c ``` static bool has_ran_yet; if (!has_ran_yet) { has_ran_yet = true; startup_user(); ``` Comment for lines +11 – +14 @drashna: Not needed anymore. You can use keyboard_post_init_user now. Signed-off-by: Developer <anotherdeveloper@icloud.com> |
6 years ago |
|
fauxpark
|
e8b65d0170 |
Cleanup rules.mk for 32U4 keyboards, A-F (#6804)
* Cleanup rules.mk for 32U4 keyboards, A-F * Put back stuff in VIA keymaps |
6 years ago |
GreenShadowMaker
|
8294a0de2c |
[Keymap] style cleanup of GreenShadowMaker's keymap (#6736)
|
6 years ago |
m47ch4n
|
a4581e6620 |
[Keymap] Added m47ch4n keymap (#6673)
* Add m47ch4n's keymap * Modify keymap * Format m47ch4n keymap.c using clang-format * Modify layer updater * Fix wrong key repeating bug * Add readme and QMK Configurator json * Fix layer updateter * Add Raise layer * Add kana keys |
6 years ago |
|
fauxpark
|
9bb4e63a11 |
Remove old promicro_bootloader_jmp() declarations (#6444)
|
6 years ago |
|
Fred Silberberg
|
171f7c561b |
Add more layouts for the ergodash (#6336)
|
6 years ago |
|
Fredric Silberberg
|
b36bb58b76 |
Add ergodash layout, update the backlight numbers for the rgb backlight to be the actual intended colors.
|
6 years ago |
|
Drashna Jaelre
|
faaaa134fd |
Replace DEBOUNCING_DELAY (deprecated) with DEBOUNCE (#5997)
|
6 years ago |
omkbd
|
eb9ea84927 |
[Keybooard] Update of Ergodash Keyboard (#5772)
* Simpler coding use SPLIT_KEYBOARD delete rev1 (rev2→rev1) because rev1is not sold * delete USE_I2C = no * Update readme.md |
6 years ago |
|
Drashna Jaelre
|
0072fdd799 |
Cleanup Default Keymaps (#5442)
* Cleanup Default Keymaps to conform to QMK Firmware standards * Minor fixes * Revert some changes |
6 years ago |
|
GreenShadowMaker
|
b85e2eef9a |
[Keymap] Greenshadowmaker keymap for ergodash (#5403)
* My Inital Keymap, adjusted for not removing outer keys, and using large inner key * First working version of keymap * RGB investigate * Updated Keymap, added keyboard-layout-editor.com json file * minor fix * Update keyboards/ergodash/rev2/keymaps/greenshadowmaker/config.h Ah! Thanks fort the clarification, it was a blind copy/paste Co-Authored-By: GreenShadowMaker <39226745+GreenShadowMaker@users.noreply.github.com> * Update keyboards/ergodash/rev2/keymaps/greenshadowmaker/config.h Co-Authored-By: GreenShadowMaker <39226745+GreenShadowMaker@users.noreply.github.com> * Update keyboards/ergodash/rev2/keymaps/greenshadowmaker/config.h Co-Authored-By: GreenShadowMaker <39226745+GreenShadowMaker@users.noreply.github.com> * Update keyboards/ergodash/rev2/keymaps/greenshadowmaker/config.h Co-Authored-By: GreenShadowMaker <39226745+GreenShadowMaker@users.noreply.github.com> * Update keyboards/ergodash/rev2/keymaps/greenshadowmaker/rules.mk Co-Authored-By: GreenShadowMaker <39226745+GreenShadowMaker@users.noreply.github.com> * Update keyboards/ergodash/rev2/keymaps/greenshadowmaker/keymap.c Co-Authored-By: GreenShadowMaker <39226745+GreenShadowMaker@users.noreply.github.com> * Update keyboards/ergodash/rev2/keymaps/greenshadowmaker/keymap.c Co-Authored-By: GreenShadowMaker <39226745+GreenShadowMaker@users.noreply.github.com> * Update keyboards/ergodash/rev2/keymaps/greenshadowmaker/keymap.c Co-Authored-By: GreenShadowMaker <39226745+GreenShadowMaker@users.noreply.github.com> * Update keyboards/ergodash/rev2/keymaps/greenshadowmaker/keymap.c Co-Authored-By: GreenShadowMaker <39226745+GreenShadowMaker@users.noreply.github.com> * removed persistent_default_layer_set and the QWERTY section as suggested |
6 years ago |
|
omkbd
|
be497126e8 |
[Keymap] Update keymap.c (#5290)
|
6 years ago |
|
fauxpark
|
e2d3c92199 |
Remove redundant KC_TRNS and KC_NO fillers in default keymaps (#5152)
|
6 years ago |
|
GreenShadowMaker
|
65d3afc915 |
[Keyboard] Update ergodash readme.md (#5092)
Clarification of Keys to Keymap note added |
6 years ago |
|
GreenShadowMaker
|
c4ce613bff |
ergodash Keyboard readme documentation (#5046)
* Update readme.md Added reminder/example on how to install * Update readme.md Added note about rev2 and PCB versions * Update readme.md format |
6 years ago |
|
Drashna Jaelre
|
b05c0e46c6 |
Adds a default value for IS_COMMAND for COMMAND feature (#4301)
* Add default value for IS_COMMAND for COMMAND feature * Cleanup and consistency * Update Templates to reflect change * Fix IS_COMMAND in template * Fix IS_COMMAND define * Use consistent IS_COMMAND block in templates * Remove unnecessary `#undef IS_COMMAND` directives * Fix compile issue on orthodox * Reomve IS_COMMAND option for newer boards * Remove all existing definitions of IS_COMMAND if they use default LSHIFT and RSHIFT setting * Remove a couple of additional IS_COMMAND defines * Remove remaining redundant IS_COMMAND definitions * Remove #undef IS_COMMAND from orthodox:drashna and whitefox:konstantin * Remove multiple empty lines in modified config.h files * Update additional boards * Reomve IS_COMMAND from newer boards * Update Alice keyboard * Remove IS_COMMAND from additional boards Jan 24th edition |
6 years ago |
|
Drashna Jaelre
|
7e99d869de |
Remove all of the deprecated RGB defines
Fixes #3641 |
7 years ago |
|
Drashna Jaelre
|
00b6f14821 |
Replace outdated RGB/Audio information
|
7 years ago |
|
omkbd
|
b65e214375 |
Keyboard: add ergodash mini keyboard (#3901)
* add ergodash mini add ergodash mini (4rows version) fix keymap and readme * fix replace include guard remove includes * fix audio |
7 years ago |
|
noroadsleft
|
82277af884 |
Ergodash refactor and Configurator update (#3378)
* Moved info.json to rev1 directory * rev1 info.json metadata update * Configurator support for ErgoDash rev2 * Moved rev1/ergodash.h to ergodash.h * Integrate rev2 support into ergodash.h; delete rev2/ergodash.h |
7 years ago |
|
omkbd
|
d5def73f6e |
sync the left and right backlight led control on ErgoDash (#3298)
* Hardware update Backlight enable Change pin Add 2keys (68→70) * change readme * support rev1 change keymap path * move ergodash.h * sync the left and right backlight led matrix.c is same as iris keyboad backlight breathing is unstable, so it comment out |
7 years ago |
|
omkbd
|
87d9bb461b |
ErgoDash Hardware Update (#3269)
* Hardware update Backlight enable Change pin Add 2keys (68→70) * change readme * support rev1 change keymap path * move ergodash.h |
7 years ago |
|
noroadsleft
|
4cf4009b2b |
Ergodash refactor (#3196)
* Deleted LAYOUTS = ortho_5x14 from rules.mk * Refactor * Configurator support |
7 years ago |
|
omkbd
|
e921b9a77e |
Add ErgoDash keyboard (#3128)
* create ergodash * Revert "create ergodash" This reverts commit b261c808c30fee95cb656629f7e9b44b01e79363. * add ergodash * keymap→layout * use set_single_persistent_default_layer |
7 years ago |