* bastardkb: restructure folder hierarchy ahead of supporting other adapters/mcus
Upcoming support for the following (adapter, mcu) pairs will be
submitted in follow-up PRs:
- `v2/elitec`
- `v2/stemcell`
- `blackpill`
This PR contains the following changes:
- Move previous implementation to an inner `v1/elitec` folder
- Move keyboard USB IDs and strings to data driven
- Update headers to update maintainers list
- Run `qmk format-c`
* bastardkb/charybdis: remove broken acceleration implementation
* bastardkb/charybdis: fix debug output
* bastardkb: add support for BastardKb the `v2/elitec` (adapter, mcu) pair
* bastardkb: add Blackpill support
* bastardkb/charybdis/3x5: add `bstiq` keymap
* bastardkb/charybdis: add fake LEDs to the configuration
For the Charybdis 3x5 (respectively 4x6), the LED config now simulates
36 (respectively 58) LEDs instead of the actual 35 (respectively 56) to
prevent confusion when testing LEDs during assembly when handedness is
not set correctly. Those fake LEDs are bound to the physical
bottom-left corner.
* bastardkbk/charybdis/readme.md: update build commands
Merge pull request #5 from Nathancooke7/update_charybdis_readme_v2_shield.
* bastardkb/charybdis: fix Via keymap with blackpill
* bastardkb/charybdis: add 3x6 configuration
* bastardkb/charybdis: remove unnecessary files
* bastardkb/charybdis: remove obsolete code
* bastardkb/charybdis/3x6: add Via keymap
* bastardkb: add support for Splinky (RP2040) board
* bastardkb: initial configuration for the Splinky (SPI not working yet)
* bastardkb/charybdis/3x5/v2/splinky: tentative change to enable trackball
* bastardkb/charybdis/3x5/v2/splinky: fix SCK, MISO, MOSI pins
* bastardkb/charybdis/3x5/v2/splinky: fix SCK, MISO, MOSI pins
* bastardkb/charybdis/4x6/v2/splinky: add SPI configuration and enable trackball
* bastardkb/charybdis/3x6: add splinky config
* bastardkb/*/v2/splinky: update drivers to `vendor`
* bastardkb/dilemma: add new board
* bastardkb/charybdis: fix infinite loop in `layer_state_set_user(…)` in the `via` keymaps
* bastardkb/dilemma: add `bstiq` keymap
* bastardkb: specify blackpill boards
* bastardkb/charybdis: fix blackpill-specific define syntax
* bastardkb: remove `NO_ACTION_MACRO` and `NO_ACTION_FUNCTION` which are no longer valid options
* bastardkb: fix `QK_BOOT` keycodes
* bastardkb/dilemma: fix mouse direction on X axis
* bastardkb/charybdis/3x6: adjust CS
* bastardkb/dilemma: adjust trackpad configuration
* charybdis: fix `PWM33XX_CS_PIN` defines
This is a follow-up of https://github.com/qmk/qmk_firmware/pull/17613.
* bastardkb: remove Vial mentions from `bstiq` keymaps
* Cleanup unnecessary comments
Co-authored-by: Nathan <nathan.cooke@compass.com>
Co-authored-by: Charly Delay <0xcharly@codesink.dev>
* sinanju.h: add matrix diagram
* add LAYOUT_60_ansi_wkl_split_bs_rshift macro
Same matrix as `LAYOUT_all`, but with position K2D (right half of split Backspace) moved to the end of the top row.
* refactor keymaps
- use `LAYOUT_60_ansi_wkl_split_bs_rshift` macro instead of `LAYOUT_all`
- polish four-space indent
- update grid alignment
- replace `RESET` keycode with `QK_BOOT`
* remove now-unused LAYOUT_all macro
* add LAYOUT_60_ansi_wkl macro with keymap
Add a layout with 2u Backspace and 2.75u right Shift.
* info.json: correct maintainer value
* Initial Apollo87H support
* Define RGB animations and default animation
* Add proper per-key RGB support
* Adjust LED positions
* Separate delta-gamma
* Fine-tune LED positions
* fix up GAMMA revision
* fix up tabs indentation to spaces indentation
* Fixed positioning and CS-SW defs for some LEDs
* Fix INS RGB position
* Fine-tune LED positions, fix default RGB
* Update readme's
* Rename LAYOUT_87H to lowercase 87h
* Formatting gamma's rules.mk
* Formatting delta's rules.mk
* Use smaller readme image
* Use smaller README image
* First support for 87H-T-SC and 88H-T-SC
* Update README
* Fix layout naming
* Remove
* Remove EEPROM definitions, fix missing RGB LED mod/alpha definer
* Add suggestions from noroadsleft
* chiffre refactor for new revisions
* updated led matrix config
* updated per suggestions
* add tapdance enable
* revert tapdance (none defined in the default keymaps)
* clean up rules
* add readme for HE
* remove notes in readme
* fix perm
* fix perms
* Fix spacing on readme
* fix perm
* fix perms again?
Python will evaluate first the left and then the right side of the and operator.
The left side would previously return True based on the truthiness logic that treats any non-emptry string as true.
It would not check if the desired keymap exists.
If the left side is true it will evaluate the right side which will check for the existance of a specific keymap.
With this change the check for existance of two keymaps is implemented.
* Added autoclicker, better mouse, vim like FN layer and more.
* Updated docs to comply with guidelines
* Fixed Imgur links
* increased step sizes
* updated readme to reflect step size
* Added second delay array for autoclicker to compensate for RGB animation CPU loads
* better RGB effects and updated docs
* better README.md formatting
* added DEBONCE libinput workaround for Linux
* fixed formatting
* fixed typos and clarified
* fixed layer picture order
* Update keyboards/dztech/dz65rgb/keymaps/yuannan/keymap.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/dztech/dz65rgb/keymaps/yuannan/README.md
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Updated Docs and rules
* Updated with the new deferred exec API to ensure more consistant CPS
* renamed README.md to be lower case to comply with fauxpark's request
* Remapped alt to be left instead of right for compatibility reasons
* Update keyboards/dztech/dz65rgb/keymaps/yuannan/config.h
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Move Pointing Device Initialization to after Split Post Initialization
If both pointing device and split is enabled, the pointing device init needs to be called after the split post init, otherwise the connection (serial/etc) isn't initialized yet, and any commands that need to send data over (such as calling the set cpi command) never get sent over.
QMK Bot
James Young
Charly Delay
Drashna Jaelre
4pplet
Álvaro A. Volpato
TJ
JayceFayne
jack
Niko Wenselowski
jpe230
Yuannan
mechlovin
Aidan Gauland
Sắn
Joel Challis
dependabot[bot]
jonavin
Albert Y
Wilba