8cfa2e8023
Add automatic application start on virtual disk ejection to the Mass Storage class bootloader.
12 years ago
54e46d7818
Add smaller AVR8 targets to the Mass Storage bootloader target list in the Bootloader build test.
12 years ago
9d988fdc22
Make the Mass Storage bootloader compatible with the original (green) XPLAIN boards.
12 years ago
88bcc6fde5
Speed up Mass Storage bootloader by turning off the internal clock divider, as there is enough FLASH space to do so.
12 years ago
be33d3a515
Update Mass Storage bootloader so that it can support devices with only 4KB bootloader sections by creating a special AUX section before the real bootloader section to store part of the bootloader code.
12 years ago
e635872612
Small size improvement in the Printer and Mass Storage class bootloaders.
12 years ago
0b1f33e2a2
Move out the Mass Storage class bootloader to the main Bootloader directory now that it is functional.
12 years ago
df9b04c87f
Add documentation to the incomplete Mass Storage class bootloader, update the virtual FAT file entry so that the bootloader section is omitted (not user readable/writable). Fix some minor documentation errors in the Printer class bootloader.
12 years ago
d5d83b8e8f
Add LED flashing to the incomplete Mass Storage class bootloader. Clean up virtual FAT implementation.
12 years ago
d5d9ff73e5
Remove debug code from the incomplete Mass Storage class bootloader, rename main source files.
12 years ago
f0c7a11670
Corrections and debug channel in the Incomplete Mass Storage class bootloader.
12 years ago
64f17a679f
Add the start of a new Mass Storage class bootloader.
12 years ago
de0df8b162
Update copyright year to 2013.
13 years ago
eee252603b
Minor documentation improvements.
13 years ago
1eefbf9041
Use the framework provided GlobalInterruptEnable() function instead of the AVR8/XMEGA specific sei() macro, for future demo/project portability.
13 years ago
359fbfe14d
Add branch for the conversion of demos to use standard C header files for configuration, rather than makefile defined macros.
13 years ago
47f6a35013
Reintegrate the FullEPAddresses development branch into trunk.
13 years ago
3ea356a720
Added Dataflash operational checks and aborts to all projects using the Dataflash to ensure it is working correctly before use.
13 years ago
f1b6ddb710
Update file contributor copyrights for 2012.
13 years ago
2c806f6cee
Update file header copyrights for 2012.
13 years ago
782614dbb5
Add static keyword to all project globals whose scope should be restricted to the same module as they are declared in.
...
Tighten up the HID class bootloader code slightly, document that it currently exceeds 2KB of bootloader space for all models other than the Series 2 USB AVRs.
14 years ago
1d433d4506
Update copyright year on all source files.
15 years ago
fb76acb084
Renamed the EVENT_USB_Device_UnhandledControlRequest() event to EVENT_USB_Device_ControlRequest() as it is now fired before the library request handlers, not afterwards.
15 years ago
cb779e3d7d
Changed over www.fourwalledcubicle.com links to the new www.lufa-lib.org redirect domain, including the new aliased links for LUFA-related pages such as the various download/source control mirrors and support lists.
15 years ago
5a4def7478
Clean up excessive whitespace at the end of each line using the wspurify tool made by Laszlo Monda
15 years ago
38d2e694ef
Remove unneccesary call to USB_Device_EnableSOFEvents() in the MassStorage and MIDI Device Class demos.
15 years ago
508e905d8d
Removed complicated logic for the Endpoint_ConfigureEndpoint() function to use inlined or function called versions depending of if the given bank size is a compile time constant, as the compiler does a better job of optimizing with basic code.
...
Changed over all device demos to use a clearer algorithm for the configuring of the application's endpoints.
15 years ago
de5b16909a
Added support to the AVRISP-MKII project for ISP speeds slower than 125KHz via a new software SPI driver.
...
Added new SPI_ORDER_* data order masks to the SPI peripheral driver.
15 years ago
071e02c6b6
Add svn:eol-style property to source files, so that the line endings are correctly converted to the target system's native end of line style.
15 years ago
59c4871f80
USB_Init() no longer calls sei() to enable global interrupts - this must now be done in the user application once all init code has run.
15 years ago
fc8e4837a9
Add const keyword to the demo function parameters where possible.
15 years ago
7f9f97c792
Update copyright year to 2010.
16 years ago
d4ca7fb44c
Fix MIT license language to make its intent clearer.
16 years ago
f7ab433c67
Add optional double-banking support to the Device mode Class Drivers, on a per-endpoint, per-interface level.
16 years ago
f229502d9a
Fixed AVRISP programmer demo -- can now connect to a target and read/write Sig/Lock/Fuse/OSCCAL bytes successfully.
...
Changed SPI_Init() to allow for the clock polarity and data sample modes to be set.
Changed Dataflash_Init() to no longer call SPI_Init() automatically.
16 years ago
c5038f1bf4
Renamed all library events to properly seperate out Device and Host mode events. Changed the firing conditions for some events to ensure that events are fired by their own USB mode only.
...
Remove VBUS events - not needed as the library takes care of VBUS detection and feedback on supported AVRs via the USB_Device_Connected and USB_Device_Disconnected events.
Fixed incorrect Host state assignment in the incomplete BluetoothHost demo.
16 years ago
864196c884
State information for class drivers is now zeroed out during enumeration (both in device and host mode) to ensure sane values after each enumeration. User code should no longer explicitly set state information as this is no longer preserved.
16 years ago
f1076ac4d6
Added const modifiers to device mode class drivers.
...
Added parameter directions to function parameter documentation.
Added new experimental FAST_STREAM_FUNCTIONS compile time option to speed up stream transfers at the expense of a higher FLASH consumption (needs testing to verify improved throughput).
16 years ago
f896c00c48
Break device mode class driver interfaces into seperate config and state structs which are then combined, for clarity. Move device mode class driver interfaces back into the device mode class driver headers from the common class headers to make room for host class interfaces.
16 years ago
9798440ca4
Changed to new device mode Class Driver function name prefixes to make way for similar host mode Class drivers.
16 years ago
b9b03aadb2
Move new Class Driver powered demos to a new ClassDriver subdirectory, re-add old low level demos to a LowLevel subdirectory.
16 years ago
a67bd74e3e
Minor documentation page updates.
...
Redocumented all device demos, now that they have changed over to the new USB class drivers.
Added C linkage to class drivers for C++ support.
Added prefixes to most of the class driver constants to prevent name clashes.
16 years ago
d1e5266036
Commit of new class abstraction APIs for all device demos other than the MIDI demo - not documented yet.
...
Removed scheduler and memory allocation libraries.
Added new EVENT_USB_StartOfFrame event in the library to indicate the start of each USB frame (when generated).
Removed Tx interrupt from the USBtoSerial demo; now sends characters via polling to ensure more time for the Rx interrupt.
16 years ago
7eb4eb7cdd
Fix all device mode demos broken in the recent API changes.
...
Change USBtoSerial Tx to polling-driven rather than interrupt driven, to ensure more time for the Rx interrupt to be serviced.
16 years ago
2ee9fc7077
Rewritten event system to remove all macros, to make user code clearer.
...
Fixed incorrect ENDPOINT_EPNUM_MASK mask preventing endpoints above EP3 from being selected (thanks to Jonathan Oakley).
Removed STREAM_CALLBACK() macro - callbacks now use regular function definitions to clarify user code.
Removed DESCRIPTOR_COMPARATOR() macro - comparators should now use regular function definitions to clarify user code.
16 years ago
72c2922e38
Removed DESCRIPTOR_ADDRESS() macro as it was largely supurflous and only served to obfuscate code.
16 years ago
32f0f605ef
Removed all user pipe/endpoint interrupt APIs, added internal library support for interrupt driven control endpoints when in device mode by defining INTERRUPT_CONTROL_ENDPOINT token and passing it to the compiler via the -D switch.
16 years ago
958a1b4e2b
Fixed Mouse and Keyboard device demos not acting in accordance with the HID specification for idle periods (thanks to Brian Dickman).
...
Removed support for endpoint/pipe non-control interrupts; these did not act in the way users expected, and had many subtle issues.
16 years ago
d860e9e842
USB_HostRequest renamed to USB_ControlRequest, entire control request header is now read into USB_ControlRequest in Device mode rather than having the library pass only partially read header data to the application.
...
The USB_UnhandledControlPacket event has had its parameters removed, in favour of accessing the new USB_ControlRequest structure.
The Endpoint control stream functions now correctly send a ZLP to the host when less data than requested is sent.
16 years ago
e5e7eaee7a
Removed specialized Endpoint_ClearControl* and Pipe_ClearControl* macros in favour of the standard Endpoint_Clear* and Pipe_Clear* macros (Atmel have confirmed no effect from setting FIFOCON on control endpoints).
16 years ago
Dean Camera