Tag:
Branch:
Tree:
acf7824f9a
arm-dac-work
audio_out
b6_b7_audio
better_chibios_wait
changelog
clockworkpi
develop
edez2
eeprom_update
encoder_matrix
fix/get_report
fix/just_return_false
fix_template_bootmagic
gb_port
gc_switch
gh-pages
hailey_branch
json_audio
json_custom_keycodes
keyboard_overrides
keymap_folders
kle2json_hyper
led_matrix_direct
list_maintainers
make_cli_parsing
master
muon_light
muon_light_dc
olkb_vendor_folder
peasy
peb
pjrc_hid
planck-ez-a5-high
planck_ez_wdg
planck_ez_with_5372
planck_light_rev2
planck_thk
pre-develop-merge-nov20
python_optimizations
qmk_compile_build_keyboard
qmk_compile_improvements
qwiic_hub
qwiic_hud
qwiic_joystiic
refactor_process_record_kb_user
rgb7seg
subatomic
subatomic_encoders
subvendor_ids
titmlb
unorthodox
xap
xmega_support
zvecr-patch-1
0.10.0
0.10.1
0.10.10
0.10.11
0.10.12
0.10.13
0.10.14
0.10.15
0.10.16
0.10.17
0.10.18
0.10.19
0.10.2
0.10.20
0.10.21
0.10.22
0.10.23
0.10.24
0.10.25
0.10.26
0.10.27
0.10.28
0.10.29
0.10.3
0.10.30
0.10.31
0.10.32
0.10.33
0.10.34
0.10.35
0.10.36
0.10.37
0.10.38
0.10.39
0.10.4
0.10.40
0.10.41
0.10.42
0.10.43
0.10.44
0.10.45
0.10.46
0.10.47
0.10.48
0.10.49
0.10.5
0.10.50
0.10.51
0.10.52
0.10.53
0.10.54
0.10.6
0.10.7
0.10.8
0.10.9
0.11.0
0.11.1
0.11.10
0.11.11
0.11.12
0.11.13
0.11.14
0.11.15
0.11.16
0.11.17
0.11.18
0.11.19
0.11.2
0.11.20
0.11.21
0.11.22
0.11.23
0.11.24
0.11.25
0.11.26
0.11.27
0.11.28
0.11.29
0.11.3
0.11.30
0.11.31
0.11.32
0.11.33
0.11.34
0.11.35
0.11.36
0.11.37
0.11.38
0.11.39
0.11.4
0.11.40
0.11.41
0.11.42
0.11.43
0.11.44
0.11.45
0.11.46
0.11.47
0.11.48
0.11.49
0.11.5
0.11.50
0.11.51
0.11.52
0.11.53
0.11.54
0.11.55
0.11.56
0.11.57
0.11.58
0.11.59
0.11.6
0.11.60
0.11.61
0.11.62
0.11.63
0.11.64
0.11.65
0.11.66
0.11.67
0.11.68
0.11.69
0.11.7
0.11.70
0.11.8
0.11.9
0.12.0
0.12.1
0.12.10
0.12.11
0.12.12
0.12.13
0.12.14
0.12.15
0.12.16
0.12.17
0.12.18
0.12.19
0.12.2
0.12.20
0.12.21
0.12.22
0.12.23
0.12.24
0.12.25
0.12.26
0.12.27
0.12.28
0.12.29
0.12.3
0.12.30
0.12.31
0.12.32
0.12.33
0.12.34
0.12.35
0.12.36
0.12.37
0.12.38
0.12.39
0.12.4
0.12.40
0.12.41
0.12.42
0.12.43
0.12.44
0.12.45
0.12.46
0.12.47
0.12.48
0.12.49
0.12.5
0.12.50
0.12.51
0.12.52
0.12.6
0.12.7
0.12.8
0.12.9
0.13.0
0.13.1
0.13.10
0.13.11
0.13.12
0.13.13
0.13.14
0.13.15
0.13.16
0.13.17
0.13.18
0.13.19
0.13.2
0.13.20
0.13.21
0.13.22
0.13.23
0.13.24
0.13.25
0.13.26
0.13.27
0.13.28
0.13.29
0.13.3
0.13.30
0.13.31
0.13.32
0.13.33
0.13.34
0.13.35
0.13.36
0.13.37
0.13.38
0.13.4
0.13.5
0.13.6
0.13.7
0.13.8
0.13.9
0.14.0
0.14.1
0.14.10
0.14.11
0.14.12
0.14.13
0.14.14
0.14.15
0.14.16
0.14.17
0.14.18
0.14.19
0.14.2
0.14.20
0.14.21
0.14.22
0.14.23
0.14.24
0.14.25
0.14.26
0.14.27
0.14.28
0.14.29
0.14.3
0.14.30
0.14.31
0.14.32
0.14.33
0.14.4
0.14.5
0.14.6
0.14.7
0.14.8
0.14.9
0.15.0
0.15.1
0.15.10
0.15.11
0.15.12
0.15.13
0.15.14
0.15.15
0.15.16
0.15.17
0.15.18
0.15.19
0.15.2
0.15.20
0.15.21
0.15.22
0.15.23
0.15.24
0.15.25
0.15.3
0.15.4
0.15.5
0.15.6
0.15.7
0.15.8
0.15.9
0.16.0
0.16.1
0.16.2
0.16.3
0.16.4
0.16.5
0.16.6
0.16.7
0.16.8
0.16.9
0.17.0
0.17.1
0.17.2
0.17.3
0.17.4
0.17.5
0.5.0
0.5.1
0.5.10
0.5.100
0.5.101
0.5.102
0.5.103
0.5.104
0.5.105
0.5.106
0.5.107
0.5.108
0.5.109
0.5.11
0.5.110
0.5.111
0.5.112
0.5.113
0.5.114
0.5.115
0.5.116
0.5.117
0.5.118
0.5.119
0.5.12
0.5.120
0.5.121
0.5.122
0.5.123
0.5.124
0.5.125
0.5.126
0.5.127
0.5.128
0.5.129
0.5.13
0.5.130
0.5.131
0.5.132
0.5.133
0.5.134
0.5.135
0.5.136
0.5.137
0.5.138
0.5.139
0.5.14
0.5.140
0.5.141
0.5.142
0.5.143
0.5.144
0.5.145
0.5.146
0.5.147
0.5.148
0.5.149
0.5.15
0.5.150
0.5.151
0.5.152
0.5.153
0.5.154
0.5.155
0.5.156
0.5.157
0.5.158
0.5.159
0.5.16
0.5.160
0.5.161
0.5.162
0.5.163
0.5.164
0.5.165
0.5.166
0.5.167
0.5.168
0.5.169
0.5.17
0.5.170
0.5.171
0.5.172
0.5.173
0.5.174
0.5.175
0.5.176
0.5.177
0.5.178
0.5.179
0.5.180
0.5.181
0.5.182
0.5.183
0.5.184
0.5.185
0.5.186
0.5.187
0.5.188
0.5.189
0.5.190
0.5.191
0.5.192
0.5.193
0.5.194
0.5.195
0.5.196
0.5.197
0.5.198
0.5.199
0.5.2
0.5.20
0.5.200
0.5.201
0.5.202
0.5.203
0.5.204
0.5.205
0.5.206
0.5.207
0.5.208
0.5.209
0.5.21
0.5.210
0.5.211
0.5.212
0.5.213
0.5.214
0.5.215
0.5.216
0.5.217
0.5.218
0.5.219
0.5.22
0.5.220
0.5.221
0.5.222
0.5.223
0.5.224
0.5.225
0.5.226
0.5.227
0.5.228
0.5.229
0.5.23
0.5.230
0.5.231
0.5.232
0.5.233
0.5.234
0.5.235
0.5.236
0.5.237
0.5.238
0.5.239
0.5.24
0.5.240
0.5.241
0.5.242
0.5.243
0.5.244
0.5.245
0.5.246
0.5.247
0.5.248
0.5.249
0.5.25
0.5.250
0.5.251
0.5.252
0.5.253
0.5.254
0.5.255
0.5.256
0.5.257
0.5.258
0.5.259
0.5.26
0.5.260
0.5.261
0.5.262
0.5.263
0.5.264
0.5.27
0.5.28
0.5.29
0.5.3
0.5.30
0.5.31
0.5.32
0.5.33
0.5.34
0.5.35
0.5.36
0.5.37
0.5.38
0.5.39
0.5.4
0.5.40
0.5.41
0.5.42
0.5.43
0.5.44
0.5.45
0.5.46
0.5.47
0.5.48
0.5.49
0.5.5
0.5.50
0.5.51
0.5.52
0.5.53
0.5.54
0.5.55
0.5.56
0.5.57
0.5.58
0.5.59
0.5.6
0.5.60
0.5.61
0.5.62
0.5.63
0.5.64
0.5.65
0.5.66
0.5.67
0.5.68
0.5.69
0.5.7
0.5.70
0.5.71
0.5.72
0.5.73
0.5.74
0.5.75
0.5.76
0.5.77
0.5.78
0.5.79
0.5.8
0.5.80
0.5.81
0.5.82
0.5.83
0.5.84
0.5.85
0.5.86
0.5.87
0.5.88
0.5.89
0.5.9
0.5.90
0.5.91
0.5.92
0.5.93
0.5.94
0.5.95
0.5.96
0.5.97
0.5.98
0.5.99
0.6.0
0.6.1
0.6.10
0.6.100
0.6.101
0.6.102
0.6.103
0.6.104
0.6.105
0.6.106
0.6.107
0.6.108
0.6.109
0.6.11
0.6.110
0.6.111
0.6.112
0.6.113
0.6.114
0.6.115
0.6.116
0.6.117
0.6.118
0.6.119
0.6.12
0.6.120
0.6.121
0.6.122
0.6.123
0.6.124
0.6.125
0.6.126
0.6.127
0.6.128
0.6.129
0.6.13
0.6.130
0.6.131
0.6.132
0.6.133
0.6.134
0.6.135
0.6.136
0.6.137
0.6.138
0.6.139
0.6.14
0.6.140
0.6.141
0.6.142
0.6.143
0.6.144
0.6.145
0.6.146
0.6.147
0.6.148
0.6.149
0.6.15
0.6.150
0.6.151
0.6.152
0.6.153
0.6.154
0.6.155
0.6.156
0.6.157
0.6.158
0.6.159
0.6.16
0.6.160
0.6.161
0.6.162
0.6.163
0.6.164
0.6.165
0.6.166
0.6.167
0.6.168
0.6.169
0.6.17
0.6.170
0.6.171
0.6.172
0.6.173
0.6.174
0.6.175
0.6.176
0.6.177
0.6.178
0.6.179
0.6.18
0.6.180
0.6.181
0.6.182
0.6.183
0.6.184
0.6.185
0.6.186
0.6.187
0.6.188
0.6.189
0.6.19
0.6.190
0.6.191
0.6.192
0.6.193
0.6.194
0.6.195
0.6.196
0.6.197
0.6.198
0.6.199
0.6.2
0.6.20
0.6.200
0.6.201
0.6.202
0.6.203
0.6.204
0.6.205
0.6.206
0.6.207
0.6.208
0.6.209
0.6.21
0.6.210
0.6.211
0.6.212
0.6.213
0.6.214
0.6.215
0.6.216
0.6.217
0.6.218
0.6.219
0.6.22
0.6.220
0.6.221
0.6.222
0.6.223
0.6.224
0.6.225
0.6.226
0.6.227
0.6.228
0.6.229
0.6.23
0.6.230
0.6.231
0.6.232
0.6.233
0.6.234
0.6.235
0.6.236
0.6.237
0.6.238
0.6.239
0.6.24
0.6.240
0.6.241
0.6.242
0.6.243
0.6.244
0.6.245
0.6.246
0.6.247
0.6.248
0.6.249
0.6.25
0.6.250
0.6.251
0.6.252
0.6.253
0.6.254
0.6.255
0.6.256
0.6.257
0.6.258
0.6.259
0.6.26
0.6.260
0.6.261
0.6.262
0.6.263
0.6.264
0.6.265
0.6.266
0.6.267
0.6.268
0.6.269
0.6.27
0.6.270
0.6.271
0.6.272
0.6.273
0.6.274
0.6.275
0.6.276
0.6.277
0.6.278
0.6.279
0.6.28
0.6.280
0.6.281
0.6.282
0.6.283
0.6.284
0.6.285
0.6.286
0.6.287
0.6.288
0.6.289
0.6.29
0.6.290
0.6.291
0.6.292
0.6.293
0.6.294
0.6.295
0.6.296
0.6.297
0.6.298
0.6.299
0.6.3
0.6.30
0.6.300
0.6.301
0.6.302
0.6.303
0.6.304
0.6.305
0.6.306
0.6.307
0.6.308
0.6.309
0.6.31
0.6.310
0.6.311
0.6.312
0.6.313
0.6.314
0.6.315
0.6.316
0.6.317
0.6.318
0.6.319
0.6.32
0.6.320
0.6.321
0.6.322
0.6.323
0.6.324
0.6.325
0.6.326
0.6.327
0.6.328
0.6.329
0.6.33
0.6.330
0.6.331
0.6.332
0.6.333
0.6.334
0.6.335
0.6.336
0.6.337
0.6.338
0.6.339
0.6.34
0.6.340
0.6.341
0.6.342
0.6.343
0.6.344
0.6.345
0.6.346
0.6.347
0.6.348
0.6.349
0.6.35
0.6.350
0.6.351
0.6.352
0.6.353
0.6.354
0.6.355
0.6.356
0.6.357
0.6.358
0.6.359
0.6.36
0.6.360
0.6.361
0.6.362
0.6.363
0.6.364
0.6.365
0.6.366
0.6.367
0.6.368
0.6.369
0.6.37
0.6.370
0.6.371
0.6.372
0.6.373
0.6.374
0.6.375
0.6.376
0.6.377
0.6.378
0.6.379
0.6.38
0.6.380
0.6.381
0.6.382
0.6.383
0.6.384
0.6.385
0.6.386
0.6.387
0.6.388
0.6.389
0.6.39
0.6.390
0.6.391
0.6.392
0.6.393
0.6.394
0.6.395
0.6.396
0.6.397
0.6.398
0.6.399
0.6.4
0.6.40
0.6.400
0.6.401
0.6.402
0.6.403
0.6.404
0.6.405
0.6.406
0.6.407
0.6.408
0.6.409
0.6.41
0.6.410
0.6.411
0.6.412
0.6.413
0.6.414
0.6.415
0.6.416
0.6.417
0.6.418
0.6.419
0.6.42
0.6.420
0.6.421
0.6.422
0.6.423
0.6.424
0.6.425
0.6.426
0.6.427
0.6.428
0.6.429
0.6.43
0.6.430
0.6.431
0.6.432
0.6.433
0.6.434
0.6.435
0.6.436
0.6.437
0.6.438
0.6.439
0.6.44
0.6.440
0.6.441
0.6.442
0.6.443
0.6.444
0.6.445
0.6.446
0.6.447
0.6.448
0.6.449
0.6.45
0.6.450
0.6.451
0.6.452
0.6.453
0.6.454
0.6.455
0.6.456
0.6.457
0.6.458
0.6.459
0.6.46
0.6.460
0.6.461
0.6.462
0.6.463
0.6.464
0.6.47
0.6.48
0.6.49
0.6.5
0.6.50
0.6.51
0.6.52
0.6.53
0.6.54
0.6.55
0.6.56
0.6.57
0.6.58
0.6.59
0.6.6
0.6.60
0.6.61
0.6.62
0.6.63
0.6.64
0.6.65
0.6.66
0.6.67
0.6.68
0.6.69
0.6.7
0.6.70
0.6.71
0.6.72
0.6.73
0.6.74
0.6.75
0.6.76
0.6.77
0.6.78
0.6.79
0.6.8
0.6.80
0.6.81
0.6.82
0.6.83
0.6.84
0.6.85
0.6.86
0.6.87
0.6.88
0.6.89
0.6.9
0.6.90
0.6.91
0.6.92
0.6.93
0.6.94
0.6.95
0.6.96
0.6.97
0.6.98
0.6.99
0.7.0
0.7.1
0.7.10
0.7.100
0.7.101
0.7.102
0.7.103
0.7.104
0.7.105
0.7.106
0.7.107
0.7.108
0.7.109
0.7.11
0.7.110
0.7.111
0.7.112
0.7.113
0.7.114
0.7.115
0.7.116
0.7.117
0.7.118
0.7.119
0.7.12
0.7.120
0.7.121
0.7.122
0.7.123
0.7.124
0.7.125
0.7.126
0.7.127
0.7.128
0.7.129
0.7.13
0.7.130
0.7.131
0.7.132
0.7.133
0.7.134
0.7.135
0.7.136
0.7.137
0.7.138
0.7.139
0.7.14
0.7.140
0.7.141
0.7.142
0.7.143
0.7.144
0.7.145
0.7.146
0.7.147
0.7.148
0.7.149
0.7.15
0.7.150
0.7.151
0.7.152
0.7.153
0.7.154
0.7.155
0.7.156
0.7.157
0.7.158
0.7.159
0.7.16
0.7.160
0.7.161
0.7.162
0.7.163
0.7.164
0.7.165
0.7.166
0.7.167
0.7.168
0.7.169
0.7.17
0.7.170
0.7.171
0.7.172
0.7.18
0.7.19
0.7.2
0.7.20
0.7.21
0.7.22
0.7.23
0.7.24
0.7.25
0.7.26
0.7.27
0.7.28
0.7.29
0.7.3
0.7.30
0.7.31
0.7.32
0.7.33
0.7.34
0.7.35
0.7.36
0.7.37
0.7.38
0.7.39
0.7.4
0.7.40
0.7.41
0.7.42
0.7.43
0.7.44
0.7.45
0.7.46
0.7.47
0.7.48
0.7.49
0.7.5
0.7.50
0.7.51
0.7.52
0.7.53
0.7.54
0.7.55
0.7.56
0.7.57
0.7.58
0.7.59
0.7.6
0.7.60
0.7.61
0.7.62
0.7.63
0.7.64
0.7.65
0.7.66
0.7.67
0.7.68
0.7.69
0.7.7
0.7.70
0.7.71
0.7.72
0.7.73
0.7.74
0.7.75
0.7.76
0.7.77
0.7.78
0.7.79
0.7.8
0.7.80
0.7.81
0.7.82
0.7.83
0.7.84
0.7.85
0.7.86
0.7.87
0.7.88
0.7.89
0.7.9
0.7.90
0.7.91
0.7.92
0.7.93
0.7.94
0.7.95
0.7.96
0.7.97
0.7.98
0.7.99
0.8.0
0.8.1
0.8.10
0.8.100
0.8.101
0.8.102
0.8.103
0.8.104
0.8.105
0.8.106
0.8.107
0.8.108
0.8.109
0.8.11
0.8.110
0.8.111
0.8.112
0.8.113
0.8.114
0.8.115
0.8.116
0.8.117
0.8.118
0.8.119
0.8.12
0.8.120
0.8.121
0.8.122
0.8.123
0.8.124
0.8.125
0.8.126
0.8.127
0.8.128
0.8.129
0.8.13
0.8.130
0.8.131
0.8.132
0.8.133
0.8.134
0.8.135
0.8.136
0.8.137
0.8.138
0.8.139
0.8.14
0.8.140
0.8.141
0.8.142
0.8.143
0.8.144
0.8.145
0.8.146
0.8.147
0.8.148
0.8.149
0.8.15
0.8.150
0.8.151
0.8.152
0.8.153
0.8.154
0.8.155
0.8.156
0.8.157
0.8.158
0.8.159
0.8.16
0.8.160
0.8.161
0.8.162
0.8.163
0.8.164
0.8.165
0.8.166
0.8.167
0.8.168
0.8.169
0.8.17
0.8.170
0.8.171
0.8.172
0.8.173
0.8.174
0.8.175
0.8.176
0.8.177
0.8.178
0.8.179
0.8.18
0.8.180
0.8.181
0.8.182
0.8.183
0.8.184
0.8.185
0.8.186
0.8.187
0.8.188
0.8.189
0.8.19
0.8.190
0.8.191
0.8.192
0.8.2
0.8.20
0.8.21
0.8.22
0.8.23
0.8.24
0.8.25
0.8.26
0.8.27
0.8.28
0.8.29
0.8.3
0.8.30
0.8.31
0.8.32
0.8.33
0.8.34
0.8.35
0.8.36
0.8.37
0.8.38
0.8.39
0.8.4
0.8.40
0.8.41
0.8.42
0.8.43
0.8.44
0.8.45
0.8.46
0.8.47
0.8.48
0.8.49
0.8.5
0.8.50
0.8.51
0.8.52
0.8.53
0.8.54
0.8.55
0.8.56
0.8.57
0.8.58
0.8.59
0.8.6
0.8.60
0.8.61
0.8.62
0.8.63
0.8.64
0.8.65
0.8.66
0.8.67
0.8.68
0.8.69
0.8.7
0.8.70
0.8.71
0.8.72
0.8.73
0.8.74
0.8.75
0.8.76
0.8.77
0.8.78
0.8.79
0.8.8
0.8.80
0.8.81
0.8.82
0.8.83
0.8.84
0.8.85
0.8.86
0.8.87
0.8.88
0.8.89
0.8.9
0.8.90
0.8.91
0.8.92
0.8.93
0.8.94
0.8.95
0.8.96
0.8.97
0.8.98
0.8.99
0.9.0
0.9.1
0.9.10
0.9.11
0.9.12
0.9.13
0.9.14
0.9.15
0.9.16
0.9.17
0.9.18
0.9.19
0.9.2
0.9.20
0.9.21
0.9.22
0.9.23
0.9.24
0.9.25
0.9.26
0.9.27
0.9.28
0.9.29
0.9.3
0.9.30
0.9.31
0.9.32
0.9.33
0.9.34
0.9.35
0.9.36
0.9.37
0.9.38
0.9.39
0.9.4
0.9.40
0.9.41
0.9.42
0.9.43
0.9.44
0.9.45
0.9.46
0.9.47
0.9.48
0.9.49
0.9.5
0.9.50
0.9.51
0.9.52
0.9.53
0.9.54
0.9.55
0.9.56
0.9.57
0.9.58
0.9.59
0.9.6
0.9.7
0.9.8
0.9.9
LUFA-111009
LUFA-130901
LUFA-130901-BETA
LUFA-140302
LUFA-140928
LUFA-151115
LUFA-170418
breakpoint_2019_08_30
breakpoint_2019_11_30
breakpoint_2020_02_29
breakpoint_2021_05_29
breakpoint_2021_08_28
breakpoint_2021_11_27
breakpoint_2022_05_28
drop-1.0.0
ergodox_ez-161205
gh60-0.1
planck-4.0
planck-4.1
planck-4.2
planck-5.0
planck-6.0
planck-6.1
planck-light-1.0
preonic-1.0
preonic-2.0
v4.0
${ noResults }
46 Commits (acf7824f9ab8bcd6f23b7fa26dbaa3023aa77e9f)
| Author | SHA1 | Message | Date |
|---|---|---|---|
Ryan
|
99b35940bc
|
Remove unnecessary backslash-escapes in default keymaps (#15472)
* Remove unnecessary backslash-escapes in default keymaps * Remove unnecessary backslash-escapes in via keymaps * Remove unnecessary backslash-escapes in default-ish keymaps |
4 years ago |
Stefan Kerkmann
|
c1297ceb97
|
[Core] Remove matrix_is_modified() and debounce_is_active() (#15349)
|
4 years ago |
|
Ryan
|
4791cfae1a
|
Remove width, height and key_count from info.json (#14274)
|
4 years ago |
|
Ryan
|
fe6d6cf76d
|
Remove empty override functions (#14312)
* Remove empty override functions, 0-9 * Remove empty override functions, A-D * Remove empty override functions, E-H * Remove empty override functions, handwired * Remove empty override functions, I-L * Remove empty override functions, M-P * Remove empty override functions, Q-T * Remove empty override functions, U-Z |
4 years ago |
|
Ryan
|
41c50bb653
|
Change keyboard level include guards to `pragma once` (#14248)
* Change keyboard level include guards to `pragma once` And clean up a lot of layout macros * Oops * Remove dangling endif |
4 years ago |
James Young
|
1646c0f26c
|
2021 May 29 Breaking Changes Update (#13034)
* Add Per Key functionality for AutoShift (#11536) * LED Matrix: Reactive effect buffers & advanced indicators (#12588) * [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626) * [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625) * LED Matrix: Split (#12633) * [CI] Format code according to conventions (#12650) * feat: infinite timeout for leader key (#6580) * feat: implement leader_no_timeout logic * docs(leader_key): infinite leader timeout docs * Format code according to conventions (#12680) * Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403) * Fix default ADC_RESOLUTION for ADCv3 (and ADCv4) Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers (that macro should not have been there, because ADCv3 has CFGR instead of CFGR1). Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS if it is defined (that name is used for ADCv3 and ADCv4). * Update ADC docs to match the actually used resolution ADC driver for ChibiOS actually uses the 10-bit resolution by default (probably to match AVR); fix the documentation accordingly. Also add both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names differ according to the ADC implementation in the particular MCU). * Fix pinToMux() for B12 and B13 on STM32F3xx Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and B13 pins were wrong. * Add support for all possible analog pins on STM32F1xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx (they are the same at least for STM32F103x8 and larger F103 devices, and also F102, F105, F107 families). Actually tested on STM32F103C8T6 (therefore pins C0...C5 were not tested). Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages, cannot be supported at the moment, because those pins are connected only to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1. * Add support for all possible analog pins on STM32F4xx Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally F3...F10 (if STM32_ADC_USE_ADC3 is enabled). These mux values are apparently the same for all F4xx devices, except some smaller devices may not have ADC3. Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested. Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices which don't have ADC3 also don't have the GPIOF port, therefore the code which refers to Fx pins does not compile. * Fix STM32F3xx ADC mux table in documentation The ADC driver documentation had some errors in the mux table for STM32F3xx. Fix this table to match the datasheet and the actual code (mux settings for B12 and B13 were also tested on a real STM32F303CCT6 chip). * Add STM32F1xx ADC pins to the documentation * Add STM32F4xx ADC pins to the documentation * Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600) * Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example. * Update flashing.md * Update chconf.h * Update config.h * Update halconf.h * Update mcuconf.h * eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671) * Add support for MCU = STM32F446 (#12619) * Add support for MCU = STM32F446 * Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h * Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64 * stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled. * Format code according to conventions (#12682) * Format code according to conventions (#12687) * Add STM32L433 and L443 support (#12063) * initial L433 commit * change to XC * fix L433 * disable all peripherals * update system and peripheral clocks * 433 change * use its own board files * revert its own board files * l433 specific change * fix stm32l432xx define * remove duplicate #define * fix bootloader jump * move to L443xx and add i2c2, spi2, usart3 to mcuconf.h * move to L443 * move to L443 * fix sdmmc in mcuconf.h * include STM32L443 * add L443 * Include L443 in compatible microcontrollers * Include L443 in compatible microcontrollers * Update config bootloader jump description * Update ChibiOS define reasoning * Update quantum/mcu_selection.mk * fix git conflict * Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613) * Fix bad PR merge for #6580. (#12721) * Change RGB/LED Matrix to use a simple define for USB suspend (#12697) * [CI] Format code according to conventions (#12731) * Fixing transport's led/rgb matrix suspend state logic (#12770) * [CI] Format code according to conventions (#12772) * Fix comment parsing (#12750) * Added OLED fade out support (#12086) * fix some references to bin/qmk that slipped in (#12832) * Resolve a number of warnings in `qmk generate-api` (#12833) * New command: qmk console (#12828) * stash poc * stash * tidy up implementation * Tidy up slightly for review * Tidy up slightly for review * Bodge environment to make tests pass * Refactor away from asyncio due to windows issues * Filter devices * align vid/pid printing * Add hidapi to the installers * start preparing for multiple hid_listeners * udev rules for hid_listen * refactor to move closer to end state * very basic implementation of the threaded model * refactor how vid/pid/index are supplied and parsed * windows improvements * read the report directly when usage page isn't available * add per-device colors, the choice to show names or numbers, and refactor * add timestamps * Add support for showing bootloaders * tweak the color for bootloaders * Align bootloader disconnect with connect color * add support for showing all bootloaders * fix the pyusb check * tweaks * fix exception * hide a stack trace behind -v * add --no-bootloaders option * add documentation for qmk console * Apply suggestions from code review * pyformat * clean up and flesh out KNOWN_BOOTLOADERS * Remove pointless SERIAL_LINK_ENABLE rules (#12846) * Make Swap Hands use PROGMEM (#12284) This converts the array that the Swap Hands feature uses to use PROGMEM, and to read from that array, as such. Since this array never changes at runtime, there is no reason to keep it in memory. Especially for AVR boards, as memory is a precious resource. * Fix another bin/qmk reference (#12856) * [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419) * Fixup build errors on `develop` branch. (#12723) * LED Matrix: Effects! (#12651) * Fix syntax error when compiling for ARM (#12866) * Remove KEYMAP and LAYOUT_kc (#12160) * alias KEYMAP to LAYOUT * remove KEYMAP and LAYOUT_kc * Add setup, clone, and env to the list of commands we allow even with broken modules (#12868) * Rename `point_t` -> `led_point_t` (#12864) * [Keyboard] updated a vendor name / fixed minor keymap issues (#12881) * Add missing LED Matrix suspend code to suspend.c (#12878) * LED Matrix: Documentation (#12685) * Deprecate `send_unicode_hex_string()` (#12602) * Fix spelling mistake regarding LED Matrix in split_common. (#12888) * [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895) * Use milc.subcommand.config instead of qmk.cli.config (#12915) * Use milc.subcommand.config instead * pyformat * remove the config test * Add function to allow repeated blinking of one layer (#12237) * Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time * Update doc * Rework rgblight blinking according to requested change * optimize storage * Fixup housekeeping from being invoked twice per loop. (#12933) * matrix: wait for row signal to go HIGH for every row (#12945) I noticed this discrepancy (last row of the matrix treated differently than the others) when optimizing the input latency of my keyboard controller, see also https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/ Before this commit, when tuning the delays I noticed ghost key presses when pressing the F2 key, which is on the last row of the keyboard matrix: the dead_grave key, which is on the first row of the keyboard matrix, would be incorrectly detected as pressed. After this commit, all keyboard matrix rows are interpreted correctly. I suspect that my setup is more susceptible to this nuance than others because I use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask the problem. * ensure we do not conflict with existing keymap aliases (#12976) * Add support for up to 4 IS31FL3733 drivers (#12342) * Convert Encoder callbacks to be boolean functions (#12805) * [Keyboard] Fix Terrazzo build failure (#12977) * Do not hard set config in CPTC files (#11864) * [Keyboard] Corne - Remove legacy revision support (#12226) * [Keymap] Update to Drashna keymap and user code (based on develop) (#12936) * Add Full-duplex serial driver for ARM boards (#9842) * Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987) * Backlight: add defines for default level and breathing state (#12560) * Add dire message about LUFA mass storage bootloader (#13014) * [Keyboard] Remove redundant legacy and common headers for crkbd (#13023) Was causing compiler errors on some systems. * Fix keyboards/keymaps for boolean encoder callback changes (#12985) * `backlight.c`: include `eeprom.h` (#13024) * Add changelog for 2021-05-29 Breaking Changes merge (#12939) * Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version * Add recent develop changes * Sort recent develop changes * Remove sections for ChibiOS changes per tzarc No ChibiOS changes this round. * Add and sort recent develop changes * add notes about keyboard moves/deletions * import changelog for PR 12172 Documents the change to BOOTMAGIC_ENABLE. * update section headings * re-sort changelog * add additional note regarding Bootmagic changes * remove changelog timestamp * update dates in main Breaking Changes docs * fix broken section anchors in previous changelogs * add link to backlight/eeprom patch to changelog * highlight some more changes * link PRs from section headers * Restore standard readme * run: qmk cformat --core-only |
4 years ago |
Zach White
|
38d8d5445e
|
Remove KEYMAP and LAYOUT_kc (#12160)
* alias KEYMAP to LAYOUT * remove KEYMAP and LAYOUT_kc |
4 years ago |
Joel Challis
|
f5a38b95c1
|
Remove legacy print backward compatiblitly (#11805)
* Remove legacy print backward compatiblitly * Remove legacy print backward compatiblitly - core * revert comment changes |
4 years ago |
|
Ryan
|
62f304a225
|
Remove `DESCRIPTION`, H-J (#11616)
|
4 years ago |
|
Zach White
|
c0dcee96a8
|
Initial list of keyboards to exclude from CI (#11213)
|
5 years ago |
|
Ryan
|
9366ed7282
|
Normalise include statements in keyboard code (#11185)
|
5 years ago |
|
Ryan
|
c2dd19de51
|
Fix error_log complaint about Helix boards (#9528)
|
5 years ago |
MakotoKurauchi
|
5d29a13e22
|
Changed the VID/PID for Helix keyboards (#8989)
|
5 years ago |
|
Ryan
|
d597af9e1e
|
Remove pro_micro.h (#8374)
* Remove pro_micro.h * Include quantum.h |
5 years ago |
Drashna Jaelre
|
e6b9980bd4 |
Remove keymap_config extern from default keymaps (#7399)
* Remove keymap_config extern from default keymaps * Revert unicode Apparently VSCode does not like unicode, I didn't actually edit these lines, so it must have been automatic... :( Co-Authored-By: fauxpark <fauxpark@gmail.com> |
6 years ago |
|
fauxpark
|
3dbf08b655 |
Cleanup rules.mk for 32U4 keyboards, H (#7030)
* Cleanup rules.mk for 32U4 keyboards, H * Change some boards incorrectly assumed to be halfkay |
6 years ago |
|
MakotoKurauchi
|
881f27b461 |
[Keyboard] Cleanup helix rules options (#6952)
* add temporary test shell-spript
* Use LINK_TIME_OPTIMIZATION_ENABLE instead of Link_Time_Optimization
No change in build result.
* Helix config.h use '#pragma once'
No change in build result.
* Helix helix.h,rev?/rev?.h,pico/pico.h use '#pragma once'
No change in build result.
* Use drivers/avr/pro_micro.h instead of keyboards/helix/pro_micro.h
No change in build result.
* remove keyboards/helix/{rev2|pico}/serial_config.h
No change in build result.
* 'HELIX_ROWS' macro is now referenced only in rev1/config.h and rev2/config.h.
No change in build result.
* The contents of helix/rules.mk were distributed to subdirectories.
This is a preparation to create a new subdirectory for helix code using split_common.
No change in build result.
remove 'USE_I2C = yes', 'SUBPROJECT_rev1 = no' from keyboards/helix/rules.mk.
follow code move from keyboards/helix/rules.mk to keyboards/helix/{rev1,rev2,pico}/rules.mk.
----
SRC += i2c.c
SRC += serial.c
SRC += ssd1306.c
CUSTOM_MATRIX = yes
---
* helix/{i2c.[ch], serial.[ch], ssd1306.[ch]} move into helix/local_drivers/
No change in build result.
* Simplified 'helix/pico/keymap/*/rules.mk' using KEYBOARD_LOCAL_FEATURES_MK.
No change in build result.
* add keyboards/helix/pico/local_features.mk
* add 'KEYBOARD_LOCAL_FEATURES_MK := $(dir $(lastword $(MAKEFILE_LIST)))local_features.mk' into keyboards/helix/pico/rules.mk
* remove HELIX_CUSTOMISE_MSG from keyboards/helix/pico/keymaps/*/rules.mk
* remove HELIX= process from keyboards/helix/pico/keymaps/*/rules.mk
* remove convert code(helix to standaerd) from keyboards/helix/pico/keymaps/*/rules.mk
* add 'include $(strip $(KEYBOARD_LOCAL_FEATURES_MK))' into keyboards/helix/pico/keymaps/*/rules.mk
* Simplified 'helix/rev2/keymap/*/rules.mk' using KEYBOARD_LOCAL_FEATURES_MK.
No change in build result.
* add keyboards/helix/rev2/local_features.mk
* add 'KEYBOARD_LOCAL_FEATURES_MK := $(dir $(lastword $(MAKEFILE_LIST)))local_features.mk' into keyboards/helix/rev2/rules.mk
* remove HELIX_CUSTOMISE_MSG from keyboards/helix/rev2/keymaps/*/rules.mk
* remove HELIX= process from keyboards/helix/rev2/keymaps/*/rules.mk
* remove convert code(helix to standaerd) from keyboards/helix/rev2/keymaps/*/rules.mk
* add 'include $(strip $(KEYBOARD_LOCAL_FEATURES_MK))' into keyboards/helix/rev2/keymaps/*/rules.mk
* Added helix keyboard build NEW method.
No change in build result.
## Helix build
$ make helix:default ## no oled, no backlight, no underglow
$ make helix/rev2/back:default ## no oled, with backlight, no underglow
$ make helix/rev2/under:default ## no oled, no backlight, with underglow
$ make helix/rev2/oled:default ## with oled, no backlight, not underglow
$ make helix/rev2/oled/back:default ## with oled, with backlight, no underglow
$ make helix/rev2/back/oled:default ## with oled, with backlight, no underglow
$ make helix/rev2/oled/under:default ## with oled, no backlight, with underglow
$ make helix/rev2/under/oled:default ## with oled, no backlight, with underglow
## Helix pico build
$ make helix/pico:default ## no oled, no backlight, no underglow
$ make helix/pico/back:default ## no oled, with backlight, no underglow
$ make helix/pico/under:default ## no oled, no backlight, with underglow
$ make helix/pico/oled:default ## with oled, no backlight, not underglow
* add temporary test shell-spript
* test end remove test script. Revert "add temporary test shell-spript"
This reverts commit 5dac20cd0f8b4bc192edb2313652c1635f829657.
* test end remove test script. Revert "add temporary test shell-spript"
This reverts commit ec49f63b2dc0f2b3fe8c1c36ffa615cee2f7e3ed.
* Extended the 'HELIX=' option. add keyword 'verbose', 'no_ani'.
No change in build result.
* update keyboards/helix/{rev2,pico}/keymaps/default/readme.md
* rename KEYBOARD_TOP_DIR to HELIX_TOP_DIR in rules.mk
* update keyboards/helix/{rev2,pico}/keymaps/default/readme_jp.md
* rm keyboards/helix/pico/oled/rules.mk
* update helix's readmes. All the ':avrdude' was replaced with ':flash'.
* remove F_CPU, ARCH, F_USB, INTERRUPT_CONTROL_ENDPOINT from helix/rules.mk
No change in build result.
|
6 years ago |
|
fauxpark
|
9bb4e63a11 |
Remove old promicro_bootloader_jmp() declarations (#6444)
|
6 years ago |
|
fauxpark
|
72f382fc02 |
Remove unused _BOOTLOADER defines
|
6 years ago |
|
fauxpark
|
f14629ed1c |
Remove/migrate action_get_macro()s from default keymaps (#5625)
* Remove/migrate action_get_macro()s from default keymaps * Leave these breaks alone |
6 years ago |
|
Drashna Jaelre
|
faaaa134fd |
Replace DEBOUNCING_DELAY (deprecated) with DEBOUNCE (#5997)
|
6 years ago |
|
Drashna Jaelre
|
0072fdd799 |
Cleanup Default Keymaps (#5442)
* Cleanup Default Keymaps to conform to QMK Firmware standards * Minor fixes * Revert some changes |
6 years ago |
|
fauxpark
|
e2d3c92199 |
Remove redundant KC_TRNS and KC_NO fillers in default keymaps (#5152)
|
6 years ago |
|
Drashna Jaelre
|
b05c0e46c6 |
Adds a default value for IS_COMMAND for COMMAND feature (#4301)
* Add default value for IS_COMMAND for COMMAND feature * Cleanup and consistency * Update Templates to reflect change * Fix IS_COMMAND in template * Fix IS_COMMAND define * Use consistent IS_COMMAND block in templates * Remove unnecessary `#undef IS_COMMAND` directives * Fix compile issue on orthodox * Reomve IS_COMMAND option for newer boards * Remove all existing definitions of IS_COMMAND if they use default LSHIFT and RSHIFT setting * Remove a couple of additional IS_COMMAND defines * Remove remaining redundant IS_COMMAND definitions * Remove #undef IS_COMMAND from orthodox:drashna and whitefox:konstantin * Remove multiple empty lines in modified config.h files * Update additional boards * Reomve IS_COMMAND from newer boards * Update Alice keyboard * Remove IS_COMMAND from additional boards Jan 24th edition |
6 years ago |
Takeshi ISHII
|
e2f7c3d5a5 |
Fixed the build break of helix/rev1:OLED_sample caused by PR #4462. (#4874)
|
7 years ago |
|
noroadsleft
|
7f4f0f7685 |
Remove deprecated QUANTUM_DIR code blocks from makefiles (#4754)
* Remove QUANTUM_DIR code blocks from keyboard rules This commit removes the deprecated "QUANTUM_DIR" code block from rules.mk files that affect entire keyboards. * remove QUANTUM_DIR code blocks from rules for default keymaps This commit removes the deprecated "QUANTUM_DIR" code block from rules.mk files that affect default keymaps. * remove QUANTUM_DIR code blocks from rules for user keymaps This commit removes the deprecated "QUANTUM_DIR" code block from rules.mk files that affect "user" keymaps. (It's actually any keymap that isn't named `default`.) * remove QUANTUM_DIR code blocks from rules for community layouts This commit removes the deprecated "QUANTUM_DIR" code block from rules.mk files for community layouts. * remove QUANTUM_DIR code blocks from rules for userspaces This commit removes the deprecated "QUANTUM_DIR" code block from rules.mk files for userspaces. |
7 years ago |
ishtob
|
4099536c0e |
adding Hadron v3 keyboard, QWIIC devices support, haptic feedback support (#4462)
* add initial support for hadron ver3 * add initial support for hadron ver3 * pull qwiic support for micro_led to be modified for use in hadron's 64x24 ssd1306 oled display * initial work on OLED using qwiic driver * early work to get 128x32 oled working by redefining qwiic micro oled parameters. Currently working, but would affect qwiic's micro oled functionality * moved oled defines to config.h and added ifndef to micro_oled driver * WORKING :D - note, still work in progress to get the start location correct on the 128x32 display. * added equation to automatically calculate display offset based on screen width * adding time-out timer to oled display * changed read lock staus via read_led_state * lock indications fixes * Added scroll lock indication to oled * add support for DRV2605 haptic driver * Improve readabiity of DRV2605 driver. -added typedef for waveform library -added unions for registers * Update keyboards/hadron/ver2/keymaps/default/config.h Co-Authored-By: ishtob <ishtob@gmail.com> * Update keyboards/hadron/ver2/keymaps/default/config.h Co-Authored-By: ishtob <ishtob@gmail.com> * Update keyboards/hadron/ver2/keymaps/default/config.h Co-Authored-By: ishtob <ishtob@gmail.com> * Update keyboards/hadron/ver2/keymaps/default/config.h Co-Authored-By: ishtob <ishtob@gmail.com> * Fixes for PR * PR fixes * fix old persistent layer function to use new set_single_persistent_default_layer * fix issues with changing makefile defines that broken per-key haptic pulse * Comment fixes * Add definable parameter and auto-calibration based on motor choice |
7 years ago |
comaid
|
2b7decbaeb |
Fix up screen off timer of helix (#4347)
* Fix up screen off timer of helix * Fix Up ScreenOffInterval exceeded uint16_t * Fix Up never waking up once screen off if in case of matrix are not dirty * Changing referenIng incorrect constant name * OLED_ENABLED => SSD1306OLED * Improve internal processing of process_record_kb() * Use the return value of process_record_gfx() * Move a include statement into #ifdef block Move #include "ssd1306.h` statement into #ifdef block * Move process_record_kbI() Move process_record_kb() from helix.c to rev1.c/rev2.c/pico.c * Move process_record_kb() |
7 years ago |
|
Drashna Jaelre
|
7e99d869de |
Remove all of the deprecated RGB defines
Fixes #3641 |
7 years ago |
|
Drashna Jaelre
|
00b6f14821 |
Replace outdated RGB/Audio information
|
7 years ago |
|
Takeshi ISHII
|
4665e4ffff |
Keyboard: Helix serial.c, split_scom.c bug fix and update (#4191)
* helix/serial.c add support PD1,PD3,PE6 and configuration simplify * Add comment about ATmega32U4 I2C * Add compile time check for ATmega32U4 I2C * change TAB code to 8 SPACE code * Helix serial.c PORTD,PD0 test. OK OK PD0 - PD1 OK PD2 - PD3 - PE6 * Helix serial.c PORTD,PD1 test. OK OK PD0 OK PD1 OK PD2 - PD3 - PE6 * Helix serial.c PORTD,PD3 test. OK OK PD0 OK PD1 OK PD2 OK PD3 - PE6 * Helix serial.c PORTE,PD6 test. OK OK PD0 OK PD1 OK PD2 OK PD3 OK PE6 * Helix serial.c: PD0,PD1,PD3,PE6 all test end * Helix serial.c: rename SOFT_SERIAL_PORT to SOFT_SERIAL_PIN * Helix serial.c add debug code * Helix serial.c: add transaction ID range check * Helix serial.c debug code update * Helix serial.c debug code update * Helix serial.c: Strict checking of the value of tid. * adjust the delay of serial.c * Helix serial.c: remove debug code * remove EXTRAFLAGS += -DCONSOLE_ENABLE from five_rows/rules.mk tmk_core/common.mk has >ifeq ($(strip $(CONSOLE_ENABLE)), yes) > TMK_COMMON_DEFS += -DCONSOLE_ENABLE * Fix error handling in split_scomm.c * add some comment to serial.c * add some comment about SELECT_SOFT_SERIAL_SPEED |
7 years ago |
|
MakotoKurauchi
|
79bff50247 |
Keymaps: Helix rgblight mode update (#4091)
* Helix each keymap's using rgblight mode symbol instead magic number No change in build result. * Helix pico keymaps: make rgblight modes selectable. No change in build result. * Helix rev2 keymaps: make rgblight modes selectable. No change in build result. * fixed Helix froggy/keymap.c: invalid rgblight mode value 0 to 1 (=RGBLIGHT_MODE_STATIC_LIGHT) * Deselect RGB_TEST and ALTERNATING in Helix rev2,pico keymaps config.h. |
7 years ago |
Joe Wasson
|
743449472e |
Make `PREVENT_STUCK_MODIFIERS` the default (#3107)
* Remove chording as it is not documented, not used, and needs work. * Make Leader Key an optional feature. * Switch from `PREVENT_STUCK_MODIFIERS` to `STRICT_LAYER_RELEASE` * Remove `#define PREVENT_STUCK_MODIFIERS` from keymaps. |
7 years ago |
|
MakotoKurauchi
|
feb5e4aaeb |
Keyboard: Helix serial improvements (#3608)
* add change_reciver2sender()/change_sender2reciver()
This is a change to improve readability.
* txled, rxled off in matrix_init()
* add serial_send_packet() / serial_recive_packet()
This is a change to reduce object size.
* add serial_low() at ISR() top
* add __attribute__((always_inline)) to some functions
* modify serial_send_packet()/serial_recive_packet()
A little, object size reduction.
A little, speedup.
* add debug code to helix/serial.c
* Adjust sampling timing of serial signal being received
* add split_scomm.c/split_scomm.h and change serial.c/serial.h
serial.c was divided into 2 layers, split_scom.c and serial.c.
The upper layer split_scomm.c is called from matrix.c.
The lower layer serial.c accesses the hardware.
* add split_scomm.c/split_scomm.h into helix/rev1
* reduce object size helix/rev2/matrix.c
* remove checksum check, add parity check
* force occur parity error for test
* parity test ok. remove test code
* change some comment & add skip code when buffer_size == 0
* serial.c: multiple types of transaction support
Add 4 bits transaction-type field at packet top.
Select Transaction Descriptor Table entry by transaction-type.
* helix serial master-slave transaction optimize
Using multi-type transaction feature of serial.c, communication contents between master slaves were optimized.
* add debug code for retry
* add comment into each config.h
* fix ISR status drop
* add a debug macro 'debug_retry_chg()'
* reduce led_test size
* remove debug code from helix/serial.c and etc.
* helix:five_rows change TAPPING_TERM value 140
* Improved compatibility with let's split of serial.c. Finish helix/serial.c improvement.
- The difference with the original let's split's serial.c
- It's high-speed about 4 times.
- Stable bi-directional data transfer. (Helix need master to slave transfer)
- serial.h was divided 2 files, serial_config.h and sereial.h
- With multiple types of transaction support, communication contents can be optimized. (NEW flexible API)
- USE OLD Simple APIs (compatible with let's split serial.c)
- files :
- serial_config.h -- hardware configuration (need include by config.h)
- serial.c/serial.h -- serial communication
- USE NEW flexible APIs. (Support multi-type transaction function.)
serial.c was divided into 2 layers, split_scom.c and serial.c.
The upper layer split_scomm.c is called from matrix.c.
The lower layer serial.c accesses the hardware.
- files
- split_scomm.c -- communication buffer is defined in here. call by matrix.c.
- split_scomm.h -- buffer size is defined in here. include by matrix.c, split_util.c
- serial_config.h -- hardware configuration (need include by config.h)
To use the NEW API, specify #define SERIAL_USE_MULTI_TRANSACTION
- serial.c/serial.h -- serial communication lower layer
- NEW APIs for serial.c / serial.h (The lower layer)
// Soft Serial Transaction Descriptor
typedef struct _SSTD_t {
uint8_t *status;
uint8_t initiator2target_buffer_size;
uint8_t *initiator2target_buffer;
uint8_t target2initiator_buffer_size;
uint8_t *target2initiator_buffer;
} SSTD_t;
// initiator is transaction start side
void soft_serial_initiator_init(SSTD_t *sstd_table);
// target is interrupt accept side
void soft_serial_target_init(SSTD_t *sstd_table);
int soft_serial_transaction(int sstd_index);
int soft_serial_get_and_clean_target_status(int sstd_index);
- NEW APIs for split_scomm.c / split_scomm.h (The upper layer)
move from old serial.c the following buffer and functions
serial_slave_buffer[]
serial_master_buffer[]
void serial_master_init(void)
void serial_slave_init(void)
int serial_update_buffers(void)
define SERIAL_xxxxx_BUFFER_LENGTH move from serial_config.h to split_scomm.h
|
7 years ago |
|
noroadsleft
|
180d39824b |
Helix rev1 refactor: deleted extra commas (#3379)
|
7 years ago |
|
MakotoKurauchi
|
f30d6dd785 |
Helix config refine (#3374)
* helix config.h refine |
7 years ago |
epaew
|
ebe4c3dbbe |
Helix: Move definition of LAYOUT_kc to each revision. (#3333)
|
7 years ago |
|
MakotoKurauchi
|
c8e1397e08 |
Helix fix configrator problem (#3270)
* Fix problem with configrator * Edit keyboard info |
7 years ago |
|
noroadsleft
|
e84c07e6f7 |
Helix: Refactor and Configurator support (#3238)
* Matrix refactor * Keymap refactor * Configurator support |
7 years ago |
|
U-LANDSRAAD\drashna
|
682c8a260a |
Fix audio issues with Split keyboards that missed previously
|
7 years ago |
|
Joe Wasson
|
7230923b05 |
Rename ONEHAND_ENABLE to SWAP_HANDS_ENABLE for consistency
|
7 years ago |
|
Drashna Jaelre
|
b0e8de1c97 |
Fix EE HANDS on splits losing handedness if RGB is enabled (#2399)
* Fix EE HANDS on splits losing handedness if RGB is enabled * Because I'm an idiot and did a bad cut/paste job |
7 years ago |
|
U-LANDSRAAD\drashna
|
84a713b05c |
Remove _quantum functions from custom matrix.c code
|
7 years ago |
|
MakotoKurauchi
|
bceffdefca |
Add helix keyboard (#2308)
* Fork from Let's Split * Organizing files * Delete some keymaps * I2C and serial enabled at the same time * Change readme * add #define HELIX_ROWS for multiple rows * Delete avrdude flashing script * Delete makefiles * Subproject elimination * Fix lufa path * Remove PLAY_NOTE_ARRAY usages to get rid of warning. Fix conflicting function name * Mousekey change default to off * Fix to oled display adjust * make rev2 change pin assign change keymap * use master_buffer * Timing adjustment * Organizing files * Change Keymap * Change Keymap Add EISU and KANA Correct 4rows * NKRO default to disable * EXTRAKEY_ENABLE default to disable * add rgb reset key * rgb custom function enable * Extend font * add RGBLED_POWER default folder to helix/rev2 RGB_ENABLE to no * renamed directory * Disable RGBLIGHT_CUSTOM_DRIVER * Disable LOCKING_SUPPORT_ENABLE * Update bootloader setting * Change readme * Fixed argument error |
7 years ago |