* kbdfans/bounce/75/hotswap: keymap readability fix
Update grid alignment to disambiguate which keycodes correspond in different layers.
----
Layer 0 had 13 and 9 keycodes on the bottom two rows respectively, while Layers 1-3 had 14 and 8.
* kbdfans/bounce/75/soldered: keymap readability fix
Update grid alignment to disambiguate which keycodes correspond in different layers.
----
Layer 0 had 14 and 9 keycodes on the bottom two rows respectively, while Layers 1-3 had 15 and 8.
* kbdfans/bounce/75/soldered: fix layer index in keymaps
Layer indexes were 0,1,2,1 instead of 0,1,2,3.
* Start of dz65v2 map for sbennett13
* No wpm, disable some rgb, ~copyright~
* No more raindrops
* Remove more rgb modes and set default
* Almost orgot this crappy thing
* cannot define startup :(
* Layered esc is kc_grv
* Start of dz65v2 map for sbennett13
* No wpm, disable some rgb, ~copyright~
* No more raindrops
* Remove more rgb modes and set default
* Almost orgot this crappy thing
* cannot define startup :(
* Layered esc is kc_grv
* Add license to config and keymap
From the ChibiOS HAL I2C driver pages:
After a timeout the driver must be stopped and restarted because the bus is in
an uncertain state.
This commit does that stopping explicitly on any error that occurred, not only
timeouts. As all the i2c functions restart the peripheral if necessary it is
safe to do so.
Co-authored-by: Dasky <32983009+daskygit@users.noreply.github.com>
Co-authored-by: Dasky <32983009+daskygit@users.noreply.github.com>
Static x & y should be the same type as touchData.xValue &
touchData.yValue: uint16_t.
Their delta could be larger than int8_t and should be constrained to
mouse_xy_report_t.
QMK Bot
James Young
Stefan Kerkmann
zvecr
Ryan
precondition
GG
Less/Rikki
Arthur
Kevin Zhao
turbololvo
Drashna Jael're
Albert Y
Danny
Scott Bennett
Spaceman
Daniel Kao