Make XPLAINBridge and USBtoSerial projects more reliable by forcing a flush if the UART-to-USB buffer becomes nearly full.
Reduce locking in the LightweightRingBuffer.h header files by only locking on the update of the buffer count, and require insertions and removals from each buffer to occur in only one execution thread.
Fix CDC_*_ReceiveByte() returning 0 when the interface is not configured, instead of the new -1 error value.
Fix CDC_Host_ReceiveByte() not re-freezing the pipe if no packet has been received.
Remove redundant Pipe token set commands in the CDC and RNDIS host class drivers.
Alter USBtoSerial demo so that it does not enter a blocking loop to send data from the USB to the USART, as this can cause dropped bytes in the reception code if large amounts of data are sent in both directions at the same time. Added a flush timer to the USBtoSerial code for the USART to USB interface, so that multiple bytes can be sent in the same USB packet.
Added check to CDC_Device_BytesReceived() to ensure 0 is returned when device is not enumerated to a host.
Move AVRISP project's V2Protocol_DelayMS() function to be static inline, as it is now very minimal. Added extra project doxygen documentation.
Added new Endpoint_SetEndpointDirection() macro to set the current endpoint direction for bidirectional endpoints.
Renamed internal USB_INT_ENDPOINT_SETUP macro to USB_INT_RXSTPI to fit in with the rest of the interrupt vector macros.
Removed unused relative Common.h header include from the DriverStubs board stub drivers.
Fixed Benito programmer, use the correct LED functions where needed to ensure correct status display at all times.
Remove VBUS events - not needed as the library takes care of VBUS detection and feedback on supported AVRs via the USB_Device_Connected and USB_Device_Disconnected events.
Fixed incorrect Host state assignment in the incomplete BluetoothHost demo.
Added new Endpoint_ClearStatusStage() convenience function to assist with the status stages of control transfers.
Removed vague USB_IsConnected global - test USB_DeviceState or USB_HostState explicitly to gain previous functionality.
Removed USB_IsSuspended global - test USB_DeviceState against DEVICE_STATE_Suspended instead.
Fixed possible enumeration errors from spinloops which may fail to exit if the USB connection is severed before the exit condition becomes true.
Added parameter directions to function parameter documentation.
Added new experimental FAST_STREAM_FUNCTIONS compile time option to speed up stream transfers at the expense of a higher FLASH consumption (needs testing to verify improved throughput).
Redocumented all device demos, now that they have changed over to the new USB class drivers.
Added C linkage to class drivers for C++ support.
Added prefixes to most of the class driver constants to prevent name clashes.
Removed scheduler and memory allocation libraries.
Added new EVENT_USB_StartOfFrame event in the library to indicate the start of each USB frame (when generated).
Removed Tx interrupt from the USBtoSerial demo; now sends characters via polling to ensure more time for the Rx interrupt.
Fixed incorrect ENDPOINT_EPNUM_MASK mask preventing endpoints above EP3 from being selected (thanks to Jonathan Oakley).
Removed STREAM_CALLBACK() macro - callbacks now use regular function definitions to clarify user code.
Removed DESCRIPTOR_COMPARATOR() macro - comparators should now use regular function definitions to clarify user code.
The USB_UnhandledControlPacket event has had its parameters removed, in favour of accessing the new USB_ControlRequest structure.
The Endpoint control stream functions now correctly send a ZLP to the host when less data than requested is sent.
Removed Endpoint_ClearCurrentBank() and Pipe_ClearCurrentBank() in favour of new Endpoint_ClearIN(), Endpoint_ClearOUT(), Endpoint_ClearControlIN(), Endpoint_ClearControlOUT(), Pipe_ClearIN(), Pipe_ClearOUT(), Pipe_ClearControlIN() and Pipe_ClearControlOUT() macros (done to allow for the detection of packets of zero length).
Renamed *_ReadWriteAllowed() macros to *_IsReadWriteAllowed() to remain consistent with the rest of the LUFA API.
Endpoint_IsSetupReceived() macro has been renamed to Endpoint_IsSETUPReceived(), Endpoint_ClearSetupReceived() macro has been renamed to Endpoint_ClearControlSETUP(), the Pipe_IsSetupSent() macro has been renamed to Pipe_IsSETUPSent() and the Pipe_ClearSetupSent() macro is no longer applicable and should be removed - changes made to compliment the new endpoint and pipe bank management API.
Updated all demos, bootloaders and projects to use the new endpoint and pipe management APIs (thanks to Roman Thiel).
Updated library doxygen documentation, added groups, changed documentation macro functions to real functions for clarity.
Removed old endpoint and pipe aliased read/write/discard routines which did not have an explicit endian specifier for clarity.
Removed the ButtLoadTag.h header file, as no one used for its intended purpose anyway.
Dean Camera