cda88cf97c
Start of implementation of the low level TPI programming protocol in the AVRISP project.
16 years ago
37c9ba7fa9
Fixed AVRISP project timeouts not checking for the correct timeout period (thanks to Carl Ott).
16 years ago
c3758ac5ef
Un-inline the SendAddress function in NVMTarget.c/.h of the AVRISP project.
...
Add new HotmailNotifier project, which changes a LED's colour based on the user's unread email count as sent from Windows Live Messenger.
16 years ago
021b1b567e
More speed and quality improvements to the software USART in the AVRISP project.
16 years ago
f0b4d79629
Slightly speed up software USART in the AVRISP project - faster parity computation, ensure received data is byte aligned when receive is complete by throwing away the start bit during reception.
16 years ago
4f74075fad
Speed up bit-banged USART code in the AVRISP project.
...
Fix project text files to refer to "project" instead of "demo".
16 years ago
1fa27139f5
Split out NVM access code in the AVRISP project into a seperate NVMTarget.c source file and header. Make NVM register accesses use the NVM base address as set by the host, rather than using the fixed value from the XMEGA datasheet.
16 years ago
307ba254d5
The AVRISP project can now enter PDI mode under both bit-bang and hardware USART connection modes, tested against the XPLAIN board hardware. Still need to complete higher level NVM access code so that the device's memories can be read and written.
16 years ago
66201a05e9
Fix PDI code - must send NVM enable key least significant byte first, need to make sure Tx and Rx is switched correctly including disabling the output on the Tx line when receiving.
16 years ago
7e5966c1a8
Fix AVRISP PDI protocol - make sure inverted masks have the appropriate parenthesis around them, make sure the BREAK command for the hardware USART has 12 clock cycles exactly. Poll NVM Enable bit in the target's STATUS PDI register with a timeout, as it is not set immediately.
16 years ago
42cfd15793
Change over AVRISP project to have both hardware USART and software USART modes for the PDI protocol, when enabled. Fix up PDI initialisation routines.
16 years ago
9c8ed168e5
Fix inverted bit-banged USART logic in the AVRISP project for PDI programming. Add a delay to the clock toggling in the AVRISP project to ensure that the programming speed does not exceed 10MHz under any conditions to satisfy the limits in the datasheet for all target voltages. Fix incorrect pin being used as the DATA in in PDI programming mode.
16 years ago
258a6a0177
Fix the tokens which enable and disable the different programming protocols in the AVRISP project.
16 years ago
a5adbae652
Document the PDI programming routines implemented so far in the AVRISP project. Add ability to selectively disable ISP programming support in addition to the existing ability to disable PDI programming support.
16 years ago
f69f03cb0d
Started implementing the low level PDI protocol in the AVRISP project, for XMEGA device programming.
16 years ago
1f8dfd0205
Add support for unwrapping of the XMEGA PDI programming protocol to the AVRISP Programmer project.
16 years ago
5930f47bf4
Rename V2ProtocolTarget files to ISPTarget in the AVRISP Programmer Clone project.
16 years ago
1ed6925b5b
Factor out all the ISP related code into a seperate ISPProtocol set of files in the AVRISP Clone programmer project, to clearly seperate out the programming protocols when PDI programming is implemented.
16 years ago
c3dfc58707
Fix invalid Event name rule in demo/project makefiles.
16 years ago
b221e7d175
Remove USE_NONSTANDARD_DESCRIPTOR_NAMES compile time token, split out standard descriptors into seperate USB_Descriptor_* and USB_StdDescriptor_* structures so that both can be used within the one project.
...
Add guard to the HID Host Class driver SetProtocol command, to ensure that the device supports boot protocol mode before issuing the request.
16 years ago
0486f12e3e
Add in new invalid event hook check targets to project makefiles to produce compilation errors when invalid event names are used in a project.
...
Re-add in flip, flip-ee, dfu and dfu-ee targets to project makefiles (thanks to Opendous Inc.)
Fix allowable F_CPU values comment in project makefiles.
16 years ago
0f51db56c0
Replace -finline-limit with -fno-inline-small-functions in project makefiles.
16 years ago
17d06b8494
Add VTARGET level detection to the AVRISP project on supported AVR models.
16 years ago
244bba2097
Make AVRISP project build again - fix incorrect preprocessor directive in V2Protocol.c, fix makefile LUFA_PATH.
16 years ago
271be037b7
Partial Commit: Move AVRISP project out of the Projects\Incomplete directory.
16 years ago
bff4dbe189
Fix to V2 Protocol for Fuse/Sig/Lock byte read -- off by one error on the array when writing back the response from the device.
...
FLASH/EEPROM reading and writing currently broken and unfinished, respectively.
16 years ago
7e74bd3ea2
Moved out target-related V2 protocol commands into a seperate file for the AVRISP project.
...
Added Load Extended Command functionality to the LOAD ADDRESS V2 Protocol command handler for devices with more than 64KB of memory.
16 years ago
f229502d9a
Fixed AVRISP programmer demo -- can now connect to a target and read/write Sig/Lock/Fuse/OSCCAL bytes successfully.
...
Changed SPI_Init() to allow for the clock polarity and data sample modes to be set.
Changed Dataflash_Init() to no longer call SPI_Init() automatically.
16 years ago
5acf23b254
Renamed Projects/Unfinished to Projects/Incomplete for consistancy.
16 years ago
fa8beef82d
Moved out the handling of V2 Protocol parameters to a seperate set of files. Added parameter privellages, so that an error can be returned to the host when trying to perform a get/set value action on a parameter without the correct privellages.
16 years ago
32cc2b8d4d
Reorganise V2Protocol.c, add in function to assert or de-assert target RESET pin.
16 years ago
04354ffcad
Added handler for the V2 Protocol SPI_MULTI command to the AVRISP Programmer project.
...
Added documentation of the makefile CDEFS values to the MagStripe project.
16 years ago
083d3615d3
Corrections to the unfinished AVRISP Programmer project to allow AVRStudio to connect to it.
16 years ago
0934f5c185
Move AVRISP Programmer project to a new Unfinished subdirectory of Project while it is under development.
16 years ago
ecd82778cf
Added beginnings of a new AVRISP-MKII clone project.
...
Added new Endpoint_SetEndpointDirection() macro to set the current endpoint direction for bidirectional endpoints.
Renamed internal USB_INT_ENDPOINT_SETUP macro to USB_INT_RXSTPI to fit in with the rest of the interrupt vector macros.
16 years ago
6f4cc344ab
Rename TOTAL_NUM_CONFIGURATIONS to FIXED_NUM_CONFIGURATIONS, to match the existing FIXED_CONTROL_ENDPOINT_SIZE compile time option. Add FIXED_NUM_CONFIGURATIONS to the descriptors of each project using the option.
16 years ago
3472af91a5
Change project makefiles so that the current target settings and not just the board selection is printed during the build process.
...
Fix warning in AudioOutput demos when AUDIO_OUT_STEREO output mode is selected.
16 years ago
37f8a84f35
Added new TOTAL_NUM_CONFIGURATIONS option, removed USE_SINGLE_DEVICE_CONFIGURATION compile time option (but silently convert it to USE_SINGLE_DEVICE_CONFIGURATION internally for compatibility).
...
Added new USE_FLASH_DESCRIPTORS compile time option. By default, descriptors can now lie in mixed memory spaces (specified by a new parameter to the CALLBACK_USB_GetDescriptor() function) unless one of the USE_*_DESCRIPTORS compile time option is specified.
16 years ago
e0af6014a7
Added incomplete PrinterHost demo application.
...
Seperated out Lib components of the incomplete BluetoothHost demo application out into a seperate Lib subfolder.
Changed F_CLOCK entries in project makefiles to alias to F_CPU by default, as this is the most common case.
16 years ago
feabfd12ce
Fix makefiles -- the auto-addition of -D switches to each LUFA compile time option was faulty, due to GNUMake becomming confused by the spaces in the USE_STATIC_OPTIONS lines. Make user add in the switches explicitly instead.
16 years ago
beb0b2bda0
Move LUFA compile time options to a new section in the application makefiles for clarity.
16 years ago
33a0184749
Converted device mode low-level demos to schedulerless.
16 years ago
b9b03aadb2
Move new Class Driver powered demos to a new ClassDriver subdirectory, re-add old low level demos to a LowLevel subdirectory.
16 years ago
d1e5266036
Commit of new class abstraction APIs for all device demos other than the MIDI demo - not documented yet.
...
Removed scheduler and memory allocation libraries.
Added new EVENT_USB_StartOfFrame event in the library to indicate the start of each USB frame (when generated).
Removed Tx interrupt from the USBtoSerial demo; now sends characters via polling to ensure more time for the Rx interrupt.
16 years ago
d0806c817c
Deleted StdDescriptors.c, renamed USB_GetDescriptor() to CALLBACK_USB_GetDescriptor, moved ConfigDescriptor.c/.h from the LUFA/Drivers/USB/Class/ directory to LUFA/Drivers/USB/HighLevel/ in preperation for the new USB class APIs.
16 years ago
2ee9fc7077
Rewritten event system to remove all macros, to make user code clearer.
...
Fixed incorrect ENDPOINT_EPNUM_MASK mask preventing endpoints above EP3 from being selected (thanks to Jonathan Oakley).
Removed STREAM_CALLBACK() macro - callbacks now use regular function definitions to clarify user code.
Removed DESCRIPTOR_COMPARATOR() macro - comparators should now use regular function definitions to clarify user code.
16 years ago
253deb996f
Changed PIPE_CONTROLPIPE_DEFAULT_SIZE from 8 to 64 to try to prevent problems with faulty devices which do not respect the given wLength value when reading in the device descriptor.
...
Further documentation improvements - removed file view from the main library documentation, replaced file references in the documentation with group references.
16 years ago
a504a3a010
Endpoint configuration is now refined to give better output when all configurations have static inputs - removed the now useless STATIC_ENDPOINT_CONFIGURATION compile time token.
16 years ago
6865a7bc09
Applied STATIC_ENDPOINT_CONFIGURATION and FIXED_CONTROL_SIZE tokens to all Device mode demos to reduce binary size.
16 years ago
d38fa49cb6
More documentation changes for better module-level documentation rather than file-level documentation.
16 years ago
Dean Camera