My local repo of qmk firmware.
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
qmk_firmware/keyboards/doio/kb16
Ryan 9e64300e67
Move matrix config to info.json, part 4 (#20001)
2 years ago
..
lib Added new keyboard DOIO KB16 (Rev 2) (#18699) 3 years ago
rev1 Move matrix config to info.json, part 4 (#20001) 2 years ago
rev2 Move matrix config to info.json, part 4 (#20001) 2 years ago
kb16.c initial (#18859) 3 years ago
kb16.h initial (#18859) 3 years ago
readme.md Added new keyboard DOIO KB16 (Rev 2) (#18699) 3 years ago

readme.md

KB16-01

This keyboard have 2 revision, so before you need to write your own firmware code. Please read it carefully, or you could accident bricked your keeb after that.

  • Revision 1: Using ATMEGA32U4.

When you try to go bootloader mode, QMK Toolbox will showing this message Atmel DFU device connected (libusb0): Atmel Corp. ATmega32U4 (03EB:2FF4:0000). So please compile Revision 1 and flash after that.

Oh, and one more thing. As for the Bongo Cat on OLED screen, due to small flash size that ATMEGA32U4 support. It need to be disable Mouse key support.

  • Revision 2: Using APM32F103CBT6 (clone STM32F103CBT6).

When you try to go bootloader mode, QMK Toolbox will showing this message STM32Duino device connected: LeafLabs Maple 003 (1EAF:0003:0201). So please compile Revision 2 and flash after that.