My local repo of qmk firmware.
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
qmk_firmware/keyboards/geekboards/macropad_v2
Ryan 2f9f555add
Move `TAP_CODE_DELAY` to data driven (#21363)
2 years ago
..
keymaps VIA Protocol 12 + fixes (#19916) 2 years ago
chconf.h
config.h Move `TAP_CODE_DELAY` to data driven (#21363) 2 years ago
halconf.h
info.json Move `TAP_CODE_DELAY` to data driven (#21363) 2 years ago
macropad_v2.c Move layouts for direct_pins boards to data driven (#19872) 2 years ago
mcuconf.h
readme.md
rules.mk Remove CORTEX_ENABLE_WFI_IDLE from keyboards. (#21353) 2 years ago

readme.md

geekboards/macropad_v2

Geekboards Macropad v2

8-keys macropad with CNC aluminium case, RGB LEDs for both backlight and switches, hot-swap connectors.

Keyboard Maintainer: ruddy17
Hardware Supported: Geekboards Macropad v2, STM32F072C8T6
Hardware Availability: https://geekboards.ru

Compile instruction for this keyboard (after setting up your build environment):

make geekboards/macropad_v2:via

Update firmware

Enter bootloader

  1. Press and hold leftmost button on top row (where ESC usually is)
  2. Plug in USB
  3. Keep holding the button for 3 more seconds
  4. Release the button

Alternatively:

  1. Remove bottom cover
  2. On the pcb short together two contacts labeled BOOT0
  3. Plug in USB
  4. Release BOOT0

Flash

make geekboards/macropad_v2:via:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.