My local repo of qmk firmware.
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
qmk_firmware/keyboards/keebio/levinson
Ryan 99b35940bc
Remove unnecessary backslash-escapes in default keymaps (#15472)
4 years ago
..
keymaps Remove unnecessary backslash-escapes in default keymaps (#15472) 4 years ago
rev1 Remove empty override functions (#14312) 4 years ago
rev2
rev3 Add a <FEATURE>_SUPPORTED flag (#9058) 4 years ago
.noci
config.h Change keyboard level include guards to `pragma once` (#14248) 4 years ago
info.json Remove width, height and key_count from info.json (#14274) 4 years ago
levinson.c Make Swap Hands use PROGMEM (#12284) 4 years ago
levinson.h Remove KEYMAP and LAYOUT_kc (#12160) 4 years ago
readme.md
rules.mk Tidy up NKRO_ENABLE rules (#15382) 4 years ago

readme.md

Levinson

A split 40% split 4x12 ortholinear keyboard made and sold by Keebio. It's essentially a Let's Split with LED backlight support and 2u thumb key support. More info at Keebio.

Keyboard Maintainer: Bakingpy/nooges
Hardware Supported: Pro Micro, Elite-C
Hardware Availability: Keebio

Make example for this keyboard (after setting up your build environment):

make keebio/levinson/rev3:default

Example of flashing this keyboard with Pro micro:

make keebio/levinson/rev3:default:avrdude

Example of flashing this keyboard with Elite-C:

You'll need to add BOOTLOADER = atmel-dfu to your rules.mk to ensure that resetting the board works properly.

Hold the reset button on the Elite-C board, or the reset button on the keyboard if already assembled, then release the button and run:

make keebio/levinson/rev3:default:dfu

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

A build guide for this keyboard can be found here: Levinson Build Guide