My local repo of qmk firmware.
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
qmk_firmware/keyboards/keebio/iris
Danny 7b4dc5a7e4
Add Iris Rev. 6b (#18307)
3 years ago
..
keymaps Update Iris VIA configuration (#18306) 3 years ago
rev1 Move keyboard USB IDs and strings to data driven, pass 2: J-L (#18080) 3 years ago
rev1_led Move keyboard USB IDs and strings to data driven, pass 2: J-L (#18080) 3 years ago
rev2 Move keyboard USB IDs and strings to data driven, pass 2: J-L (#18080) 3 years ago
rev3 Move keyboard USB IDs and strings to data driven, pass 2: J-L (#18080) 3 years ago
rev4 Move keyboard USB IDs and strings to data driven, pass 2: J-L (#18080) 3 years ago
rev5 Move keyboard USB IDs and strings to data driven, pass 2: J-L (#18080) 3 years ago
rev6 Move keyboard USB IDs and strings to data driven, pass 2: J-L (#18080) 3 years ago
rev6a Update Iris VIA configuration (#18306) 3 years ago
rev6b Add Iris Rev. 6b (#18307) 3 years ago
rev7 Update Iris VIA configuration (#18306) 3 years ago
config.h Change keyboard level include guards to `pragma once` (#14248) 4 years ago
info.json Move keyboard USB IDs and strings to data driven, pass 2: J-L (#18080) 3 years ago
iris.c
iris.h Add Iris Rev. 6b (#18307) 3 years ago
readme.md [Keyboard] Add notes on Iris rev6a firmware (#16878) 3 years ago

readme.md

Iris

A split ergo 4x6 keyboard with 3 or 4 thumb keys made and sold by Keebio. More info at Keebio.

Keyboard Maintainer: Bakingpy/nooges
Hardware Supported: Pro Micro, ATmega32u4
Hardware Availability: Keebio

Make example for this keyboard (after setting up your build environment):

make keebio/iris/rev6:default

Example of flashing this keyboard:

make keebio/iris/rev6:default:flash

See build environment setup then the make instructions for more information.

A build guide for this keyboard can be found here: Iris Build Guide

Iris Rev. 6 Notes

The Iris Rev. 6 and Rev. 6.1 PCBs are nearly identical and have the same firmware (rev6) pre-flashed to them that has VIA support enabled. However this stock firmware does not support for Lighting controls in VIA.

To enable Lighting controls in VIA, you will need the rev6a firmware. See Enabling Iris Rev. 6 VIA RGB Controls for more details.

Both the Rev. 6 and Rev. 6.1 PCBs are compatible with the rev6a firmware.