My local repo of qmk firmware.
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
qmk_firmware/keyboards/ergoslab
Joel Challis b7771ec25b
RESET -> QK_BOOT default keymaps (#17037)
3 years ago
..
keymaps/default RESET -> QK_BOOT default keymaps (#17037) 3 years ago
rev1 Remove `NO_ACTION_MACRO` and `NO_ACTION_FUNCTION` from keyboard config.h (#16655) 3 years ago
.noci
config.h
ergoslab.c
ergoslab.h
info.json Remove width, height and key_count from info.json (#14274) 4 years ago
readme.md
rules.mk Tidy up NKRO_ENABLE rules (#15382) 4 years ago

readme.md

ergoslab

ergoslab

A split ergo 5x6 keyboard with hotswap sockets and a heap of thumb keys designed by Tom Saleeba. More info on the GitHub Repo.

Status The ergoslab is currently being beta-tested.

  • Keyboard Maintainer: Tom Saleeba
  • Hardware Supported: Pro Micro (ATmega32U4)
  • Hardware Availability: gerbers are available from the releases page on the GitHub repo. Get them manufactured at your favourite PCB house. I used JLCPCB.

Make example for this keyboard (after setting up your build environment):

make ergoslab:default

Example of flashing this keyboard:

make ergoslab:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

A build guide for this keyboard can be found here: Build Guide