|
5 years ago | |
---|---|---|
.. | ||
keymaps | [Keyboard] Remove `PREVENT_STUCK_MODIFIERS` from config.h files (#7592) | 6 years ago |
util | [Keyboard] add keymap beautifier for Ergodox EZ (#4393) | 6 years ago |
190hotfix.sh |
…
|
|
config.h | Move Ergodox EZ RGB Light code to custom driver (#7309) | 6 years ago |
ergodox_ez.c | [Keyboard] Updates to ZSA boards (#6513) | 6 years ago |
ergodox_ez.h | [Keyboard] Updates to ZSA boards (#6513) | 6 years ago |
info.json | Removes Erez personally from QMK (#5883) | 6 years ago |
led_i2c.c | Use White channel on RGBW LEDs (#7678) | 5 years ago |
matrix.c | [Keyboard] Ergodox EZ - Re-init ISSI driver on reconnect (#7731) | 5 years ago |
post_config.h | Move Ergodox EZ RGB Light code to custom driver (#7309) | 6 years ago |
readme.md | Syntax update (#2660) | 7 years ago |
rules.mk | Move Ergodox EZ RGB Light code to custom driver (#7309) | 6 years ago |
readme.md
ErgoDox EZ
The Ez uses the Teensy Loader.
Linux users need to modify udev rules as described on the Teensy
Linux page. Some distributions provide a binary, maybe called
teensy-loader-cli
.
To flash the firmware:
-
Build the firmware with
make <keyboardname>:<keymapname>
, for examplemake ergodox_ez:default
-
This will result in a hex file called
ergodox_ez_keymapname.hex
, e.g.ergodox_ez_default.hex
-
Start the teensy loader.
-
Load the .hex file into it.
-
Press the Reset button by inserting a paperclip gently into the reset hole in the top right corner.
-
Click the button in the Teensy app to download the firmware.
See also video demonstration using Teensy in auto mode.
To flash with ´teensy-loader-cli´:
-
Build the firmware with
make keymapname
, for examplemake default
-
Run ´<path/to/>teensy_loader_cli -mmcu=atmega32u4 -w ergodox_ez_.hex´
-
Press the Reset button by inserting a paperclip gently into the reset hole in the top right corder.
Settings
You may want to enable QMK_KEYS_PER_SCAN because the Ergodox has a relatively slow scan rate.