My local repo of qmk firmware.
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
qmk_firmware/keyboards/arrayperipherals/1x4p1
Ryan e837a32b2b
Move layouts for direct_pins boards to data driven (#19872)
2 years ago
..
keymaps Remove legacy keycodes, part 6 (#18740) 3 years ago
config.h Migrate `DIRECT_PINS` to data driven (#19826) 2 years ago
info.json Move layouts for direct_pins boards to data driven (#19872) 2 years ago
readme.md 1x4p1 (#11186) 4 years ago
rules.mk Migrate `MCU` and `BOOTLOADER` to data-driven (#19529) 2 years ago

readme.md

[1x4] + 1 Macropad

[1x4] + 1 Macropad

A macropad with a 1x4 matrix array with an additional rotary that also functions as a button. More info at arrayperipherals.com

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Resetting macropad into bootloader mode.

The stock version of the macropad has bootmagic lite enabled. To trigger the bootloader, the first key (key furthest way from the rotary) needs to be held down when plugging the keyboard in. NOTE: Using bootmagic lite will always reset the EEPROM, so you will lose any settings that have been saved.